kernel_optimize_test/arch/s390/kernel/nmi.c

393 lines
10 KiB
C
Raw Normal View History

/*
* Machine check handler
*
* Copyright IBM Corp. 2000, 2009
* Author(s): Ingo Adlung <adlung@de.ibm.com>,
* Martin Schwidefsky <schwidefsky@de.ibm.com>,
* Cornelia Huck <cornelia.huck@de.ibm.com>,
* Heiko Carstens <heiko.carstens@de.ibm.com>,
*/
#include <linux/kernel_stat.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/hardirq.h>
#include <linux/time.h>
#include <linux/module.h>
#include <asm/lowcore.h>
#include <asm/smp.h>
#include <asm/etr.h>
#include <asm/cputime.h>
#include <asm/nmi.h>
#include <asm/crw.h>
#include <asm/switch_to.h>
struct mcck_struct {
int kill_task;
int channel_report;
int warning;
unsigned long long mcck_code;
};
static DEFINE_PER_CPU(struct mcck_struct, cpu_mcck);
static void s390_handle_damage(char *msg)
{
smp_send_stop();
disabled_wait((unsigned long) __builtin_return_address(0));
while (1);
}
/*
* Main machine check handler function. Will be called with interrupts enabled
* or disabled and machine checks enabled or disabled.
*/
void s390_handle_mcck(void)
{
unsigned long flags;
struct mcck_struct mcck;
/*
* Disable machine checks and get the current state of accumulated
* machine checks. Afterwards delete the old state and enable machine
* checks again.
*/
local_irq_save(flags);
local_mcck_disable();
s390: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to this_cpu_inc(y) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: linux390@de.ibm.com Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-18 01:30:45 +08:00
/*
* Ummm... Does this make sense at all? Copying the percpu struct
* and then zapping it one statement later?
*/
memcpy(&mcck, this_cpu_ptr(&cpu_mcck), sizeof(mcck));
memset(&mcck, 0, sizeof(struct mcck_struct));
clear_cpu_flag(CIF_MCCK_PENDING);
local_mcck_enable();
local_irq_restore(flags);
if (mcck.channel_report)
crw_handle_channel_report();
/*
* A warning may remain for a prolonged period on the bare iron.
* (actually until the machine is powered off, or the problem is gone)
* So we just stop listening for the WARNING MCH and avoid continuously
* being interrupted. One caveat is however, that we must do this per
* processor and cannot use the smp version of ctl_clear_bit().
* On VM we only get one interrupt per virtally presented machinecheck.
* Though one suffices, we may get one interrupt per (virtual) cpu.
*/
if (mcck.warning) { /* WARNING pending ? */
static int mchchk_wng_posted = 0;
/* Use single cpu clear, as we cannot handle smp here. */
__ctl_clear_bit(14, 24); /* Disable WARNING MCH */
if (xchg(&mchchk_wng_posted, 1) == 0)
kill_cad_pid(SIGPWR, 1);
}
if (mcck.kill_task) {
local_irq_enable();
printk(KERN_EMERG "mcck: Terminating task because of machine "
"malfunction (code 0x%016llx).\n", mcck.mcck_code);
printk(KERN_EMERG "mcck: task: %s, pid: %d.\n",
current->comm, current->pid);
do_exit(SIGSEGV);
}
}
EXPORT_SYMBOL_GPL(s390_handle_mcck);
/*
* returns 0 if all registers could be validated
* returns 1 otherwise
*/
static int notrace s390_revalidate_registers(struct mci *mci)
{
int kill_task;
u64 zero;
void *fpt_save_area, *fpt_creg_save_area;
kill_task = 0;
zero = 0;
if (!mci->gr) {
/*
* General purpose registers couldn't be restored and have
* unknown contents. Process needs to be terminated.
*/
kill_task = 1;
}
if (!mci->fp) {
/*
* Floating point registers can't be restored and
* therefore the process needs to be terminated.
*/
kill_task = 1;
}
#ifndef CONFIG_64BIT
asm volatile(
" ld 0,0(%0)\n"
" ld 2,8(%0)\n"
" ld 4,16(%0)\n"
" ld 6,24(%0)"
: : "a" (&S390_lowcore.floating_pt_save_area));
#endif
if (MACHINE_HAS_IEEE) {
#ifdef CONFIG_64BIT
fpt_save_area = &S390_lowcore.floating_pt_save_area;
fpt_creg_save_area = &S390_lowcore.fpt_creg_save_area;
#else
fpt_save_area = (void *) S390_lowcore.extended_save_area_addr;
fpt_creg_save_area = fpt_save_area + 128;
#endif
if (!mci->fc) {
/*
* Floating point control register can't be restored.
* Task will be terminated.
*/
asm volatile("lfpc 0(%0)" : : "a" (&zero), "m" (zero));
kill_task = 1;
} else
asm volatile("lfpc 0(%0)" : : "a" (fpt_creg_save_area));
asm volatile(
" ld 0,0(%0)\n"
" ld 1,8(%0)\n"
" ld 2,16(%0)\n"
" ld 3,24(%0)\n"
" ld 4,32(%0)\n"
" ld 5,40(%0)\n"
" ld 6,48(%0)\n"
" ld 7,56(%0)\n"
" ld 8,64(%0)\n"
" ld 9,72(%0)\n"
" ld 10,80(%0)\n"
" ld 11,88(%0)\n"
" ld 12,96(%0)\n"
" ld 13,104(%0)\n"
" ld 14,112(%0)\n"
" ld 15,120(%0)\n"
: : "a" (fpt_save_area));
}
#ifdef CONFIG_64BIT
/* Revalidate vector registers */
if (MACHINE_HAS_VX && current->thread.vxrs) {
if (!mci->vr) {
/*
* Vector registers can't be restored and therefore
* the process needs to be terminated.
*/
kill_task = 1;
}
restore_vx_regs((__vector128 *)
S390_lowcore.vector_save_area_addr);
}
#endif
/* Revalidate access registers */
asm volatile(
" lam 0,15,0(%0)"
: : "a" (&S390_lowcore.access_regs_save_area));
if (!mci->ar) {
/*
* Access registers have unknown contents.
* Terminating task.
*/
kill_task = 1;
}
/* Revalidate control registers */
if (!mci->cr) {
/*
* Control registers have unknown contents.
* Can't recover and therefore stopping machine.
*/
s390_handle_damage("invalid control registers.");
} else {
#ifdef CONFIG_64BIT
asm volatile(
" lctlg 0,15,0(%0)"
: : "a" (&S390_lowcore.cregs_save_area));
#else
asm volatile(
" lctl 0,15,0(%0)"
: : "a" (&S390_lowcore.cregs_save_area));
#endif
}
/*
* We don't even try to revalidate the TOD register, since we simply
* can't write something sensible into that register.
*/
#ifdef CONFIG_64BIT
/*
* See if we can revalidate the TOD programmable register with its
* old contents (should be zero) otherwise set it to zero.
*/
if (!mci->pr)
asm volatile(
" sr 0,0\n"
" sckpf"
: : : "0", "cc");
else
asm volatile(
" l 0,0(%0)\n"
" sckpf"
: : "a" (&S390_lowcore.tod_progreg_save_area)
: "0", "cc");
#endif
/* Revalidate clock comparator register */
set_clock_comparator(S390_lowcore.clock_comparator);
/* Check if old PSW is valid */
if (!mci->wp)
/*
* Can't tell if we come from user or kernel mode
* -> stopping machine.
*/
s390_handle_damage("old psw invalid.");
if (!mci->ms || !mci->pm || !mci->ia)
kill_task = 1;
return kill_task;
}
#define MAX_IPD_COUNT 29
#define MAX_IPD_TIME (5 * 60 * USEC_PER_SEC) /* 5 minutes */
#define ED_STP_ISLAND 6 /* External damage STP island check */
#define ED_STP_SYNC 7 /* External damage STP sync check */
#define ED_ETR_SYNC 12 /* External damage ETR sync check */
#define ED_ETR_SWITCH 13 /* External damage ETR switch to local */
/*
* machine check handler.
*/
void notrace s390_do_machine_check(struct pt_regs *regs)
{
static int ipd_count;
static DEFINE_SPINLOCK(ipd_lock);
static unsigned long long last_ipd;
struct mcck_struct *mcck;
unsigned long long tmp;
struct mci *mci;
int umode;
nmi_enter();
inc_irq_stat(NMI_NMI);
mci = (struct mci *) &S390_lowcore.mcck_interruption_code;
s390: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to this_cpu_inc(y) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: linux390@de.ibm.com Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-18 01:30:45 +08:00
mcck = this_cpu_ptr(&cpu_mcck);
umode = user_mode(regs);
if (mci->sd) {
/* System damage -> stopping machine */
s390_handle_damage("received system damage machine check.");
}
if (mci->pd) {
if (mci->b) {
/* Processing backup -> verify if we can survive this */
u64 z_mcic, o_mcic, t_mcic;
#ifdef CONFIG_64BIT
z_mcic = (1ULL<<63 | 1ULL<<59 | 1ULL<<29);
o_mcic = (1ULL<<43 | 1ULL<<42 | 1ULL<<41 | 1ULL<<40 |
1ULL<<36 | 1ULL<<35 | 1ULL<<34 | 1ULL<<32 |
1ULL<<30 | 1ULL<<21 | 1ULL<<20 | 1ULL<<17 |
1ULL<<16);
#else
z_mcic = (1ULL<<63 | 1ULL<<59 | 1ULL<<57 | 1ULL<<50 |
1ULL<<29);
o_mcic = (1ULL<<43 | 1ULL<<42 | 1ULL<<41 | 1ULL<<40 |
1ULL<<36 | 1ULL<<35 | 1ULL<<34 | 1ULL<<32 |
1ULL<<30 | 1ULL<<20 | 1ULL<<17 | 1ULL<<16);
#endif
t_mcic = *(u64 *)mci;
if (((t_mcic & z_mcic) != 0) ||
((t_mcic & o_mcic) != o_mcic)) {
s390_handle_damage("processing backup machine "
"check with damage.");
}
/*
* Nullifying exigent condition, therefore we might
* retry this instruction.
*/
spin_lock(&ipd_lock);
tmp = get_tod_clock();
if (((tmp - last_ipd) >> 12) < MAX_IPD_TIME)
ipd_count++;
else
ipd_count = 1;
last_ipd = tmp;
if (ipd_count == MAX_IPD_COUNT)
s390_handle_damage("too many ipd retries.");
spin_unlock(&ipd_lock);
} else {
/* Processing damage -> stopping machine */
s390_handle_damage("received instruction processing "
"damage machine check.");
}
}
if (s390_revalidate_registers(mci)) {
if (umode) {
/*
* Couldn't restore all register contents while in
* user mode -> mark task for termination.
*/
mcck->kill_task = 1;
mcck->mcck_code = *(unsigned long long *) mci;
set_cpu_flag(CIF_MCCK_PENDING);
} else {
/*
* Couldn't restore all register contents while in
* kernel mode -> stopping machine.
*/
s390_handle_damage("unable to revalidate registers.");
}
}
if (mci->cd) {
/* Timing facility damage */
s390_handle_damage("TOD clock damaged");
}
if (mci->ed && mci->ec) {
/* External damage */
if (S390_lowcore.external_damage_code & (1U << ED_ETR_SYNC))
etr_sync_check();
if (S390_lowcore.external_damage_code & (1U << ED_ETR_SWITCH))
etr_switch_to_local();
if (S390_lowcore.external_damage_code & (1U << ED_STP_SYNC))
stp_sync_check();
if (S390_lowcore.external_damage_code & (1U << ED_STP_ISLAND))
stp_island_check();
}
if (mci->se)
/* Storage error uncorrected */
s390_handle_damage("received storage error uncorrected "
"machine check.");
if (mci->ke)
/* Storage key-error uncorrected */
s390_handle_damage("received storage key-error uncorrected "
"machine check.");
if (mci->ds && mci->fa)
/* Storage degradation */
s390_handle_damage("received storage degradation machine "
"check.");
if (mci->cp) {
/* Channel report word pending */
mcck->channel_report = 1;
set_cpu_flag(CIF_MCCK_PENDING);
}
if (mci->w) {
/* Warning pending */
mcck->warning = 1;
set_cpu_flag(CIF_MCCK_PENDING);
}
nmi_exit();
}
static int __init machine_check_init(void)
{
ctl_set_bit(14, 25); /* enable external damage MCH */
ctl_set_bit(14, 27); /* enable system recovery MCH */
ctl_set_bit(14, 24); /* enable warning MCH */
return 0;
}
arch_initcall(machine_check_init);