kernel_optimize_test/arch/mips/kernel/vdso.c

193 lines
4.7 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
* Copyright (C) 2015 Imagination Technologies
* Author: Alex Smith <alex.smith@imgtec.com>
*/
#include <linux/binfmts.h>
#include <linux/elf.h>
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
#include <linux/err.h>
#include <linux/init.h>
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime() Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:57:44 +08:00
#include <linux/ioport.h>
#include <linux/kernel.h>
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
#include <linux/mm.h>
MIPS: VDSO: Always map near top of user memory When using the legacy mmap layout, for example triggered using ulimit -s unlimited, get_unmapped_area() fills memory from bottom to top starting from a fairly low address near TASK_UNMAPPED_BASE. This placement is suboptimal if the user application wishes to allocate large amounts of heap memory using the brk syscall. With the VDSO being located low in the user's virtual address space, the amount of space available for access using brk is limited much more than it was prior to the introduction of the VDSO. For example: # ulimit -s unlimited; cat /proc/self/maps 00400000-004ec000 r-xp 00000000 08:00 71436 /usr/bin/coreutils 004fc000-004fd000 rwxp 000ec000 08:00 71436 /usr/bin/coreutils 004fd000-0050f000 rwxp 00000000 00:00 0 00cc3000-00ce4000 rwxp 00000000 00:00 0 [heap] 2ab96000-2ab98000 r--p 00000000 00:00 0 [vvar] 2ab98000-2ab99000 r-xp 00000000 00:00 0 [vdso] 2ab99000-2ab9d000 rwxp 00000000 00:00 0 ... Resolve this by adjusting STACK_TOP to reserve space for the VDSO & providing an address hint to get_unmapped_area() causing it to use this space even when using the legacy mmap layout. We reserve enough space for the VDSO, plus 1MB or 256MB for 32 bit & 64 bit systems respectively within which we randomize the VDSO base address. Previously this randomization was taken care of by the mmap base address randomization performed by arch_mmap_rnd(). The 1MB & 256MB sizes are somewhat arbitrary but chosen such that we have some randomization without taking up too much of the user's virtual address space, which is often in short supply for 32 bit systems. With this the VDSO is always mapped at a high address, leaving lots of space for statically linked programs to make use of brk: # ulimit -s unlimited; cat /proc/self/maps 00400000-004ec000 r-xp 00000000 08:00 71436 /usr/bin/coreutils 004fc000-004fd000 rwxp 000ec000 08:00 71436 /usr/bin/coreutils 004fd000-0050f000 rwxp 00000000 00:00 0 00c28000-00c49000 rwxp 00000000 00:00 0 [heap] ... 7f67c000-7f69d000 rwxp 00000000 00:00 0 [stack] 7f7fc000-7f7fd000 rwxp 00000000 00:00 0 7fcf1000-7fcf3000 r--p 00000000 00:00 0 [vvar] 7fcf3000-7fcf4000 r-xp 00000000 00:00 0 [vdso] Signed-off-by: Paul Burton <paul.burton@mips.com> Reported-by: Huacai Chen <chenhc@lemote.com> Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.4+
2018-09-26 06:51:26 +08:00
#include <linux/random.h>
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
#include <linux/sched.h>
#include <linux/slab.h>
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime() Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:57:44 +08:00
#include <linux/timekeeper_internal.h>
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
#include <asm/abi.h>
#include <asm/mips-cps.h>
#include <asm/page.h>
#include <asm/vdso.h>
#include <vdso/helpers.h>
#include <vdso/vsyscall.h>
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
/* Kernel-provided data used by the VDSO. */
static union mips_vdso_data mips_vdso_data __page_aligned_data;
struct vdso_data *vdso_data = mips_vdso_data.data;
/*
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime() Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:57:44 +08:00
* Mapping for the VDSO data/GIC pages. The real pages are mapped manually, as
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
* what we map and where within the area they are mapped is determined at
* runtime.
*/
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
static struct page *no_pages[] = { NULL };
static struct vm_special_mapping vdso_vvar_mapping = {
.name = "[vvar]",
.pages = no_pages,
};
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
static void __init init_vdso_image(struct mips_vdso_image *image)
{
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
unsigned long num_pages, i;
unsigned long data_pfn;
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
BUG_ON(!PAGE_ALIGNED(image->data));
BUG_ON(!PAGE_ALIGNED(image->size));
num_pages = image->size / PAGE_SIZE;
data_pfn = __phys_to_pfn(__pa_symbol(image->data));
for (i = 0; i < num_pages; i++)
image->mapping.pages[i] = pfn_to_page(data_pfn + i);
}
static int __init init_vdso(void)
{
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
init_vdso_image(&vdso_image);
#ifdef CONFIG_MIPS32_O32
init_vdso_image(&vdso_image_o32);
#endif
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
#ifdef CONFIG_MIPS32_N32
init_vdso_image(&vdso_image_n32);
#endif
return 0;
}
subsys_initcall(init_vdso);
MIPS: VDSO: Always map near top of user memory When using the legacy mmap layout, for example triggered using ulimit -s unlimited, get_unmapped_area() fills memory from bottom to top starting from a fairly low address near TASK_UNMAPPED_BASE. This placement is suboptimal if the user application wishes to allocate large amounts of heap memory using the brk syscall. With the VDSO being located low in the user's virtual address space, the amount of space available for access using brk is limited much more than it was prior to the introduction of the VDSO. For example: # ulimit -s unlimited; cat /proc/self/maps 00400000-004ec000 r-xp 00000000 08:00 71436 /usr/bin/coreutils 004fc000-004fd000 rwxp 000ec000 08:00 71436 /usr/bin/coreutils 004fd000-0050f000 rwxp 00000000 00:00 0 00cc3000-00ce4000 rwxp 00000000 00:00 0 [heap] 2ab96000-2ab98000 r--p 00000000 00:00 0 [vvar] 2ab98000-2ab99000 r-xp 00000000 00:00 0 [vdso] 2ab99000-2ab9d000 rwxp 00000000 00:00 0 ... Resolve this by adjusting STACK_TOP to reserve space for the VDSO & providing an address hint to get_unmapped_area() causing it to use this space even when using the legacy mmap layout. We reserve enough space for the VDSO, plus 1MB or 256MB for 32 bit & 64 bit systems respectively within which we randomize the VDSO base address. Previously this randomization was taken care of by the mmap base address randomization performed by arch_mmap_rnd(). The 1MB & 256MB sizes are somewhat arbitrary but chosen such that we have some randomization without taking up too much of the user's virtual address space, which is often in short supply for 32 bit systems. With this the VDSO is always mapped at a high address, leaving lots of space for statically linked programs to make use of brk: # ulimit -s unlimited; cat /proc/self/maps 00400000-004ec000 r-xp 00000000 08:00 71436 /usr/bin/coreutils 004fc000-004fd000 rwxp 000ec000 08:00 71436 /usr/bin/coreutils 004fd000-0050f000 rwxp 00000000 00:00 0 00c28000-00c49000 rwxp 00000000 00:00 0 [heap] ... 7f67c000-7f69d000 rwxp 00000000 00:00 0 [stack] 7f7fc000-7f7fd000 rwxp 00000000 00:00 0 7fcf1000-7fcf3000 r--p 00000000 00:00 0 [vvar] 7fcf3000-7fcf4000 r-xp 00000000 00:00 0 [vdso] Signed-off-by: Paul Burton <paul.burton@mips.com> Reported-by: Huacai Chen <chenhc@lemote.com> Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.4+
2018-09-26 06:51:26 +08:00
static unsigned long vdso_base(void)
{
unsigned long base = STACK_TOP;
MIPS: VDSO: Always map near top of user memory When using the legacy mmap layout, for example triggered using ulimit -s unlimited, get_unmapped_area() fills memory from bottom to top starting from a fairly low address near TASK_UNMAPPED_BASE. This placement is suboptimal if the user application wishes to allocate large amounts of heap memory using the brk syscall. With the VDSO being located low in the user's virtual address space, the amount of space available for access using brk is limited much more than it was prior to the introduction of the VDSO. For example: # ulimit -s unlimited; cat /proc/self/maps 00400000-004ec000 r-xp 00000000 08:00 71436 /usr/bin/coreutils 004fc000-004fd000 rwxp 000ec000 08:00 71436 /usr/bin/coreutils 004fd000-0050f000 rwxp 00000000 00:00 0 00cc3000-00ce4000 rwxp 00000000 00:00 0 [heap] 2ab96000-2ab98000 r--p 00000000 00:00 0 [vvar] 2ab98000-2ab99000 r-xp 00000000 00:00 0 [vdso] 2ab99000-2ab9d000 rwxp 00000000 00:00 0 ... Resolve this by adjusting STACK_TOP to reserve space for the VDSO & providing an address hint to get_unmapped_area() causing it to use this space even when using the legacy mmap layout. We reserve enough space for the VDSO, plus 1MB or 256MB for 32 bit & 64 bit systems respectively within which we randomize the VDSO base address. Previously this randomization was taken care of by the mmap base address randomization performed by arch_mmap_rnd(). The 1MB & 256MB sizes are somewhat arbitrary but chosen such that we have some randomization without taking up too much of the user's virtual address space, which is often in short supply for 32 bit systems. With this the VDSO is always mapped at a high address, leaving lots of space for statically linked programs to make use of brk: # ulimit -s unlimited; cat /proc/self/maps 00400000-004ec000 r-xp 00000000 08:00 71436 /usr/bin/coreutils 004fc000-004fd000 rwxp 000ec000 08:00 71436 /usr/bin/coreutils 004fd000-0050f000 rwxp 00000000 00:00 0 00c28000-00c49000 rwxp 00000000 00:00 0 [heap] ... 7f67c000-7f69d000 rwxp 00000000 00:00 0 [stack] 7f7fc000-7f7fd000 rwxp 00000000 00:00 0 7fcf1000-7fcf3000 r--p 00000000 00:00 0 [vvar] 7fcf3000-7fcf4000 r-xp 00000000 00:00 0 [vdso] Signed-off-by: Paul Burton <paul.burton@mips.com> Reported-by: Huacai Chen <chenhc@lemote.com> Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.4+
2018-09-26 06:51:26 +08:00
if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT)) {
/* Skip the delay slot emulation page */
base += PAGE_SIZE;
}
MIPS: VDSO: Always map near top of user memory When using the legacy mmap layout, for example triggered using ulimit -s unlimited, get_unmapped_area() fills memory from bottom to top starting from a fairly low address near TASK_UNMAPPED_BASE. This placement is suboptimal if the user application wishes to allocate large amounts of heap memory using the brk syscall. With the VDSO being located low in the user's virtual address space, the amount of space available for access using brk is limited much more than it was prior to the introduction of the VDSO. For example: # ulimit -s unlimited; cat /proc/self/maps 00400000-004ec000 r-xp 00000000 08:00 71436 /usr/bin/coreutils 004fc000-004fd000 rwxp 000ec000 08:00 71436 /usr/bin/coreutils 004fd000-0050f000 rwxp 00000000 00:00 0 00cc3000-00ce4000 rwxp 00000000 00:00 0 [heap] 2ab96000-2ab98000 r--p 00000000 00:00 0 [vvar] 2ab98000-2ab99000 r-xp 00000000 00:00 0 [vdso] 2ab99000-2ab9d000 rwxp 00000000 00:00 0 ... Resolve this by adjusting STACK_TOP to reserve space for the VDSO & providing an address hint to get_unmapped_area() causing it to use this space even when using the legacy mmap layout. We reserve enough space for the VDSO, plus 1MB or 256MB for 32 bit & 64 bit systems respectively within which we randomize the VDSO base address. Previously this randomization was taken care of by the mmap base address randomization performed by arch_mmap_rnd(). The 1MB & 256MB sizes are somewhat arbitrary but chosen such that we have some randomization without taking up too much of the user's virtual address space, which is often in short supply for 32 bit systems. With this the VDSO is always mapped at a high address, leaving lots of space for statically linked programs to make use of brk: # ulimit -s unlimited; cat /proc/self/maps 00400000-004ec000 r-xp 00000000 08:00 71436 /usr/bin/coreutils 004fc000-004fd000 rwxp 000ec000 08:00 71436 /usr/bin/coreutils 004fd000-0050f000 rwxp 00000000 00:00 0 00c28000-00c49000 rwxp 00000000 00:00 0 [heap] ... 7f67c000-7f69d000 rwxp 00000000 00:00 0 [stack] 7f7fc000-7f7fd000 rwxp 00000000 00:00 0 7fcf1000-7fcf3000 r--p 00000000 00:00 0 [vvar] 7fcf3000-7fcf4000 r-xp 00000000 00:00 0 [vdso] Signed-off-by: Paul Burton <paul.burton@mips.com> Reported-by: Huacai Chen <chenhc@lemote.com> Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.4+
2018-09-26 06:51:26 +08:00
if (current->flags & PF_RANDOMIZE) {
base += get_random_int() & (VDSO_RANDOMIZE_SIZE - 1);
base = PAGE_ALIGN(base);
}
return base;
}
int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
{
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
struct mips_vdso_image *image = current->thread.abi->vdso;
struct mm_struct *mm = current->mm;
unsigned long gic_size, vvar_size, size, base, data_addr, vdso_addr, gic_pfn;
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
struct vm_area_struct *vma;
int ret;
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:25 +08:00
if (mmap_write_lock_killable(mm))
return -EINTR;
if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT)) {
/* Map delay slot emulation page */
base = mmap_region(NULL, STACK_TOP, PAGE_SIZE,
VM_READ | VM_EXEC |
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
0, NULL);
if (IS_ERR_VALUE(base)) {
ret = base;
goto out;
}
MIPS: Use per-mm page to execute branch delay slot instructions In some cases the kernel needs to execute an instruction from the delay slot of an emulated branch instruction. These cases include: - Emulated floating point branch instructions (bc1[ft]l?) for systems which don't include an FPU, or upon which the kernel is run with the "nofpu" parameter. - MIPSr6 systems running binaries targeting older revisions of the architecture, which may include branch instructions whose encodings are no longer valid in MIPSr6. Executing instructions from such delay slots is done by writing the instruction to memory followed by a trap, as part of an "emuframe", and executing it. This avoids the requirement of an emulator for the entire MIPS instruction set. Prior to this patch such emuframes are written to the user stack and executed from there. This patch moves FP branch delay emuframes off of the user stack and into a per-mm page. Allocating a page per-mm leaves userland with access to only what it had access to previously, and compared to other solutions is relatively simple. When a thread requires a delay slot emulation, it is allocated a frame. A thread may only have one frame allocated at any one time, since it may only ever be executing one instruction at any one time. In order to ensure that we can free up allocated frame later, its index is recorded in struct thread_struct. In the typical case, after executing the delay slot instruction we'll execute a break instruction with the BRK_MEMU code. This traps back to the kernel & leads to a call to do_dsemulret which frees the allocated frame & moves the user PC back to the instruction that would have executed following the emulated branch. In some cases the delay slot instruction may be invalid, such as a branch, or may trigger an exception. In these cases the BRK_MEMU break instruction will not be hit. In order to ensure that frames are freed this patch introduces dsemul_thread_cleanup() and calls it to free any allocated frame upon thread exit. If the instruction generated an exception & leads to a signal being delivered to the thread, or indeed if a signal simply happens to be delivered to the thread whilst it is executing from the struct emuframe, then we need to take care to exit the frame appropriately. This is done by either rolling back the user PC to the branch or advancing it to the continuation PC prior to signal delivery, using dsemul_thread_rollback(). If this were not done then a sigreturn would return to the struct emuframe, and if that frame had meanwhile been used in response to an emulated branch instruction within the signal handler then we would execute the wrong user code. Whilst a user could theoretically place something like a compact branch to self in a delay slot and cause their thread to become stuck in an infinite loop with the frame never being deallocated, this would: - Only affect the users single process. - Be architecturally invalid since there would be a branch in the delay slot, which is forbidden. - Be extremely unlikely to happen by mistake, and provide a program with no more ability to harm the system than a simple infinite loop would. If a thread requires a delay slot emulation & no frame is available to it (ie. the process has enough other threads that all frames are currently in use) then the thread joins a waitqueue. It will sleep until a frame is freed by another thread in the process. Since we now know whether a thread has an allocated frame due to our tracking of its index, the cookie field of struct emuframe is removed as we can be more certain whether we have a valid frame. Since a thread may only ever have a single frame at any given time, the epc field of struct emuframe is also removed & the PC to continue from is instead stored in struct thread_struct. Together these changes simplify & shrink struct emuframe somewhat, allowing twice as many frames to fit into the page allocated for them. The primary benefit of this patch is that we are now free to mark the user stack non-executable where that is possible. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: Maciej Rozycki <maciej.rozycki@imgtec.com> Cc: Faraz Shahbazker <faraz.shahbazker@imgtec.com> Cc: Raghu Gandham <raghu.gandham@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13764/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-08 18:06:19 +08:00
}
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime() Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:57:44 +08:00
/*
* Determine total area size. This includes the VDSO data itself, the
* data page, and the GIC user page if present. Always create a mapping
* for the GIC user area if the GIC is present regardless of whether it
* is the current clocksource, in case it comes into use later on. We
* only map a page even though the total area is 64K, as we only need
* the counter registers at the start.
*/
gic_size = mips_gic_present() ? PAGE_SIZE : 0;
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime() Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:57:44 +08:00
vvar_size = gic_size + PAGE_SIZE;
size = vvar_size + image->size;
/*
* Find a region that's large enough for us to perform the
* colour-matching alignment below.
*/
if (cpu_has_dc_aliases)
size += shm_align_mask + 1;
MIPS: VDSO: Always map near top of user memory When using the legacy mmap layout, for example triggered using ulimit -s unlimited, get_unmapped_area() fills memory from bottom to top starting from a fairly low address near TASK_UNMAPPED_BASE. This placement is suboptimal if the user application wishes to allocate large amounts of heap memory using the brk syscall. With the VDSO being located low in the user's virtual address space, the amount of space available for access using brk is limited much more than it was prior to the introduction of the VDSO. For example: # ulimit -s unlimited; cat /proc/self/maps 00400000-004ec000 r-xp 00000000 08:00 71436 /usr/bin/coreutils 004fc000-004fd000 rwxp 000ec000 08:00 71436 /usr/bin/coreutils 004fd000-0050f000 rwxp 00000000 00:00 0 00cc3000-00ce4000 rwxp 00000000 00:00 0 [heap] 2ab96000-2ab98000 r--p 00000000 00:00 0 [vvar] 2ab98000-2ab99000 r-xp 00000000 00:00 0 [vdso] 2ab99000-2ab9d000 rwxp 00000000 00:00 0 ... Resolve this by adjusting STACK_TOP to reserve space for the VDSO & providing an address hint to get_unmapped_area() causing it to use this space even when using the legacy mmap layout. We reserve enough space for the VDSO, plus 1MB or 256MB for 32 bit & 64 bit systems respectively within which we randomize the VDSO base address. Previously this randomization was taken care of by the mmap base address randomization performed by arch_mmap_rnd(). The 1MB & 256MB sizes are somewhat arbitrary but chosen such that we have some randomization without taking up too much of the user's virtual address space, which is often in short supply for 32 bit systems. With this the VDSO is always mapped at a high address, leaving lots of space for statically linked programs to make use of brk: # ulimit -s unlimited; cat /proc/self/maps 00400000-004ec000 r-xp 00000000 08:00 71436 /usr/bin/coreutils 004fc000-004fd000 rwxp 000ec000 08:00 71436 /usr/bin/coreutils 004fd000-0050f000 rwxp 00000000 00:00 0 00c28000-00c49000 rwxp 00000000 00:00 0 [heap] ... 7f67c000-7f69d000 rwxp 00000000 00:00 0 [stack] 7f7fc000-7f7fd000 rwxp 00000000 00:00 0 7fcf1000-7fcf3000 r--p 00000000 00:00 0 [vvar] 7fcf3000-7fcf4000 r-xp 00000000 00:00 0 [vdso] Signed-off-by: Paul Burton <paul.burton@mips.com> Reported-by: Huacai Chen <chenhc@lemote.com> Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.4+
2018-09-26 06:51:26 +08:00
base = get_unmapped_area(NULL, vdso_base(), size, 0, 0);
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
if (IS_ERR_VALUE(base)) {
ret = base;
goto out;
}
/*
* If we suffer from dcache aliasing, ensure that the VDSO data page
* mapping is coloured the same as the kernel's mapping of that memory.
* This ensures that when the kernel updates the VDSO data userland
* will observe it without requiring cache invalidations.
*/
if (cpu_has_dc_aliases) {
base = __ALIGN_MASK(base, shm_align_mask);
base += ((unsigned long)vdso_data - gic_size) & shm_align_mask;
}
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime() Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:57:44 +08:00
data_addr = base + gic_size;
vdso_addr = data_addr + PAGE_SIZE;
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime() Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:57:44 +08:00
vma = _install_special_mapping(mm, base, vvar_size,
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
VM_READ | VM_MAYREAD,
&vdso_vvar_mapping);
if (IS_ERR(vma)) {
ret = PTR_ERR(vma);
goto out;
}
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime() Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:57:44 +08:00
/* Map GIC user page. */
if (gic_size) {
gic_pfn = virt_to_phys(mips_gic_base + MIPS_GIC_USER_OFS) >> PAGE_SHIFT;
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime() Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:57:44 +08:00
ret = io_remap_pfn_range(vma, base, gic_pfn, gic_size,
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime() Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:57:44 +08:00
pgprot_noncached(PAGE_READONLY));
if (ret)
goto out;
}
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
/* Map data page. */
MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime() Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:57:44 +08:00
ret = remap_pfn_range(vma, data_addr,
virt_to_phys(vdso_data) >> PAGE_SHIFT,
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
PAGE_SIZE, PAGE_READONLY);
if (ret)
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
goto out;
/* Map VDSO image. */
vma = _install_special_mapping(mm, vdso_addr, image->size,
VM_READ | VM_EXEC |
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
&image->mapping);
if (IS_ERR(vma)) {
ret = PTR_ERR(vma);
goto out;
}
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
mm->context.vdso = (void *)vdso_addr;
ret = 0;
MIPS: Initial implementation of a VDSO Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-21 16:54:38 +08:00
out:
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:25 +08:00
mmap_write_unlock(mm);
return ret;
}