kernel_optimize_test/net/mac80211/mesh.h

374 lines
13 KiB
C
Raw Normal View History

/*
* Copyright (c) 2008, 2009 open80211s Ltd.
* Authors: Luis Carlos Cobo <luisca@cozybit.com>
* Javier Cardona <javier@cozybit.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef IEEE80211S_H
#define IEEE80211S_H
#include <linux/types.h>
#include <linux/jhash.h>
#include "ieee80211_i.h"
/* Data structures */
/**
* enum mesh_path_flags - mac80211 mesh path flags
*
*
*
* @MESH_PATH_ACTIVE: the mesh path can be used for forwarding
* @MESH_PATH_RESOLVING: the discovery process is running for this mesh path
* @MESH_PATH_SN_VALID: the mesh path contains a valid destination sequence
* number
* @MESH_PATH_FIXED: the mesh path has been manually set and should not be
* modified
* @MESH_PATH_RESOLVED: the mesh path can has been resolved
* @MESH_PATH_REQ_QUEUED: there is an unsent path request for this destination
* already queued up, waiting for the discovery process to start.
*
* MESH_PATH_RESOLVED is used by the mesh path timer to
* decide when to stop or cancel the mesh path discovery.
*/
enum mesh_path_flags {
MESH_PATH_ACTIVE = BIT(0),
MESH_PATH_RESOLVING = BIT(1),
MESH_PATH_SN_VALID = BIT(2),
MESH_PATH_FIXED = BIT(3),
MESH_PATH_RESOLVED = BIT(4),
MESH_PATH_REQ_QUEUED = BIT(5),
};
/**
* enum mesh_deferred_task_flags - mac80211 mesh deferred tasks
*
*
*
* @MESH_WORK_HOUSEKEEPING: run the periodic mesh housekeeping tasks
* @MESH_WORK_GROW_MPATH_TABLE: the mesh path table is full and needs
* to grow.
* @MESH_WORK_GROW_MPP_TABLE: the mesh portals table is full and needs to
* grow
* @MESH_WORK_ROOT: the mesh root station needs to send a frame
* @MESH_WORK_DRIFT_ADJUST: time to compensate for clock drift relative to other
* mesh nodes
*/
enum mesh_deferred_task_flags {
MESH_WORK_HOUSEKEEPING,
MESH_WORK_GROW_MPATH_TABLE,
MESH_WORK_GROW_MPP_TABLE,
MESH_WORK_ROOT,
MESH_WORK_DRIFT_ADJUST,
};
/**
* struct mesh_path - mac80211 mesh path structure
*
* @dst: mesh path destination mac address
* @sdata: mesh subif
* @next_hop: mesh neighbor to which frames for this destination will be
* forwarded
* @timer: mesh path discovery timer
* @frame_queue: pending queue for frames sent to this destination while the
* path is unresolved
* @sn: target sequence number
* @metric: current metric to this destination
* @hop_count: hops to destination
* @exp_time: in jiffies, when the path will expire or when it expired
* @discovery_timeout: timeout (lapse in jiffies) used for the last discovery
* retry
* @discovery_retries: number of discovery retries
* @flags: mesh path flags, as specified on &enum mesh_path_flags
* @state_lock: mesh path state lock used to protect changes to the
* mpath itself. No need to take this lock when adding or removing
* an mpath to a hash bucket on a path table.
* @rann_snd_addr: the RANN sender address
* @rann_metric: the aggregated path metric towards the root node
* @last_preq_to_root: Timestamp of last PREQ sent to root
* @is_root: the destination station of this path is a root node
* @is_gate: the destination station of this path is a mesh gate
*
*
* The combination of dst and sdata is unique in the mesh path table. Since the
* next_hop STA is only protected by RCU as well, deleting the STA must also
* remove/substitute the mesh_path structure and wait until that is no longer
* reachable before destroying the STA completely.
*/
struct mesh_path {
u8 dst[ETH_ALEN];
u8 mpp[ETH_ALEN]; /* used for MPP or MAP */
struct ieee80211_sub_if_data *sdata;
struct sta_info __rcu *next_hop;
struct timer_list timer;
struct sk_buff_head frame_queue;
struct rcu_head rcu;
u32 sn;
u32 metric;
u8 hop_count;
unsigned long exp_time;
u32 discovery_timeout;
u8 discovery_retries;
enum mesh_path_flags flags;
spinlock_t state_lock;
u8 rann_snd_addr[ETH_ALEN];
u32 rann_metric;
unsigned long last_preq_to_root;
bool is_root;
bool is_gate;
};
/**
* struct mesh_table
*
* @hash_buckets: array of hash buckets of the table
* @hashwlock: array of locks to protect write operations, one per bucket
* @hash_mask: 2^size_order - 1, used to compute hash idx
* @hash_rnd: random value used for hash computations
* @entries: number of entries in the table
* @free_node: function to free nodes of the table
* @copy_node: function to copy nodes of the table
* @size_order: determines size of the table, there will be 2^size_order hash
* buckets
* @mean_chain_len: maximum average length for the hash buckets' list, if it is
* reached, the table will grow
* @known_gates: list of known mesh gates and their mpaths by the station. The
* gate's mpath may or may not be resolved and active.
*
* rcu_head: RCU head to free the table
*/
struct mesh_table {
/* Number of buckets will be 2^N */
struct hlist_head *hash_buckets;
spinlock_t *hashwlock; /* One per bucket, for add/del */
unsigned int hash_mask; /* (2^size_order) - 1 */
__u32 hash_rnd; /* Used for hash generation */
atomic_t entries; /* Up to MAX_MESH_NEIGHBOURS */
void (*free_node) (struct hlist_node *p, bool free_leafs);
int (*copy_node) (struct hlist_node *p, struct mesh_table *newtbl);
int size_order;
int mean_chain_len;
struct hlist_head *known_gates;
spinlock_t gates_lock;
struct rcu_head rcu_head;
};
/* Recent multicast cache */
/* RMC_BUCKETS must be a power of 2, maximum 256 */
#define RMC_BUCKETS 256
#define RMC_QUEUE_MAX_LEN 4
#define RMC_TIMEOUT (3 * HZ)
/**
* struct rmc_entry - entry in the Recent Multicast Cache
*
* @seqnum: mesh sequence number of the frame
* @exp_time: expiration time of the entry, in jiffies
* @sa: source address of the frame
*
* The Recent Multicast Cache keeps track of the latest multicast frames that
* have been received by a mesh interface and discards received multicast frames
* that are found in the cache.
*/
struct rmc_entry {
struct list_head list;
u32 seqnum;
unsigned long exp_time;
u8 sa[ETH_ALEN];
};
struct mesh_rmc {
struct list_head bucket[RMC_BUCKETS];
u32 idx_mask;
};
#define IEEE80211_MESH_PEER_INACTIVITY_LIMIT (1800 * HZ)
#define IEEE80211_MESH_HOUSEKEEPING_INTERVAL (60 * HZ)
#define MESH_PATH_EXPIRE (600 * HZ)
/* Default maximum number of plinks per interface */
#define MESH_MAX_PLINKS 256
/* Maximum number of paths per interface */
#define MESH_MAX_MPATHS 1024
/* Number of frames buffered per destination for unresolved destinations */
#define MESH_FRAME_QUEUE_LEN 10
/* Public interfaces */
/* Various */
int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc,
const u8 *da, const u8 *sa);
int ieee80211_new_mesh_header(struct ieee80211_sub_if_data *sdata,
struct ieee80211s_hdr *meshhdr,
const char *addr4or5, const char *addr6);
int mesh_rmc_check(struct ieee80211_sub_if_data *sdata,
const u8 *addr, struct ieee80211s_hdr *mesh_hdr);
bool mesh_matches_local(struct ieee80211_sub_if_data *sdata,
struct ieee802_11_elems *ie);
void mesh_ids_set_default(struct ieee80211_if_mesh *mesh);
void mesh_mgmt_ies_add(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb);
int mesh_add_meshconf_ie(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb);
int mesh_add_meshid_ie(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb);
int mesh_add_rsn_ie(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb);
int mesh_add_vendor_ies(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb);
int mesh_add_ht_cap_ie(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb);
int mesh_add_ht_oper_ie(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb);
void mesh_rmc_free(struct ieee80211_sub_if_data *sdata);
int mesh_rmc_init(struct ieee80211_sub_if_data *sdata);
void ieee80211s_init(void);
void ieee80211s_update_metric(struct ieee80211_local *local,
struct sta_info *sta, struct sk_buff *skb);
void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata);
int ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata);
void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata);
void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh);
const struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method);
/* wrapper for ieee80211_bss_info_change_notify() */
void ieee80211_mbss_info_change_notify(struct ieee80211_sub_if_data *sdata,
u32 changed);
mac80211: mesh power save basics Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-31 01:14:08 +08:00
/* mesh power save */
u32 ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata);
u32 ieee80211_mps_set_sta_local_pm(struct sta_info *sta,
enum nl80211_mesh_power_mode pm);
mac80211: mesh power save basics Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-31 01:14:08 +08:00
void ieee80211_mps_set_frame_flags(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta,
struct ieee80211_hdr *hdr);
void ieee80211_mps_sta_status_update(struct sta_info *sta);
void ieee80211_mps_rx_h_sta_process(struct sta_info *sta,
struct ieee80211_hdr *hdr);
void ieee80211_mpsp_trigger_process(u8 *qc, struct sta_info *sta,
bool tx, bool acked);
void ieee80211_mps_frame_release(struct sta_info *sta,
struct ieee802_11_elems *elems);
/* Mesh paths */
int mesh_nexthop_lookup(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb);
int mesh_nexthop_resolve(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb);
void mesh_path_start_discovery(struct ieee80211_sub_if_data *sdata);
struct mesh_path *mesh_path_lookup(struct ieee80211_sub_if_data *sdata,
const u8 *dst);
struct mesh_path *mpp_path_lookup(struct ieee80211_sub_if_data *sdata,
const u8 *dst);
int mpp_path_add(struct ieee80211_sub_if_data *sdata,
const u8 *dst, const u8 *mpp);
struct mesh_path *
mesh_path_lookup_by_idx(struct ieee80211_sub_if_data *sdata, int idx);
void mesh_path_fix_nexthop(struct mesh_path *mpath, struct sta_info *next_hop);
void mesh_path_expire(struct ieee80211_sub_if_data *sdata);
void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt, size_t len);
int mesh_path_add(struct ieee80211_sub_if_data *sdata, const u8 *dst);
int mesh_path_add_gate(struct mesh_path *mpath);
int mesh_path_send_to_gates(struct mesh_path *mpath);
int mesh_gate_num(struct ieee80211_sub_if_data *sdata);
/* Mesh plinks */
void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata,
u8 *hw_addr, struct ieee802_11_elems *ie);
bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie);
u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata);
void mesh_plink_broken(struct sta_info *sta);
u32 mesh_plink_deactivate(struct sta_info *sta);
u32 mesh_plink_open(struct sta_info *sta);
u32 mesh_plink_block(struct sta_info *sta);
void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt, size_t len,
struct ieee80211_rx_status *rx_status);
void mesh_sta_cleanup(struct sta_info *sta);
/* Private interfaces */
/* Mesh tables */
void mesh_mpath_table_grow(void);
void mesh_mpp_table_grow(void);
/* Mesh paths */
int mesh_path_error_tx(struct ieee80211_sub_if_data *sdata,
u8 ttl, const u8 *target, __le32 target_sn,
__le16 target_rcode, const u8 *ra);
void mesh_path_assign_nexthop(struct mesh_path *mpath, struct sta_info *sta);
void mesh_path_flush_pending(struct mesh_path *mpath);
void mesh_path_tx_pending(struct mesh_path *mpath);
int mesh_pathtbl_init(void);
void mesh_pathtbl_unregister(void);
int mesh_path_del(struct ieee80211_sub_if_data *sdata, const u8 *addr);
void mesh_path_timer(unsigned long data);
void mesh_path_flush_by_nexthop(struct sta_info *sta);
void mesh_path_discard_frame(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb);
void mesh_path_tx_root_frame(struct ieee80211_sub_if_data *sdata);
bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt);
extern int mesh_paths_generation;
#ifdef CONFIG_MAC80211_MESH
static inline
u32 mesh_plink_inc_estab_count(struct ieee80211_sub_if_data *sdata)
{
atomic_inc(&sdata->u.mesh.estab_plinks);
return mesh_accept_plinks_update(sdata);
}
static inline
u32 mesh_plink_dec_estab_count(struct ieee80211_sub_if_data *sdata)
{
atomic_dec(&sdata->u.mesh.estab_plinks);
return mesh_accept_plinks_update(sdata);
}
static inline int mesh_plink_free_count(struct ieee80211_sub_if_data *sdata)
{
return sdata->u.mesh.mshcfg.dot11MeshMaxPeerLinks -
atomic_read(&sdata->u.mesh.estab_plinks);
}
static inline bool mesh_plink_availables(struct ieee80211_sub_if_data *sdata)
{
return (min_t(long, mesh_plink_free_count(sdata),
MESH_MAX_PLINKS - sdata->local->num_sta)) > 0;
}
static inline void mesh_path_activate(struct mesh_path *mpath)
{
mpath->flags |= MESH_PATH_ACTIVE | MESH_PATH_RESOLVED;
}
static inline bool mesh_path_sel_is_hwmp(struct ieee80211_sub_if_data *sdata)
{
return sdata->u.mesh.mesh_pp_id == IEEE80211_PATH_PROTOCOL_HWMP;
}
void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local);
void mesh_path_flush_by_iface(struct ieee80211_sub_if_data *sdata);
void mesh_sync_adjust_tbtt(struct ieee80211_sub_if_data *sdata);
void ieee80211s_stop(void);
#else
static inline void
ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) {}
static inline bool mesh_path_sel_is_hwmp(struct ieee80211_sub_if_data *sdata)
{ return false; }
static inline void mesh_path_flush_by_iface(struct ieee80211_sub_if_data *sdata)
{}
static inline void ieee80211s_stop(void) {}
#endif
#endif /* IEEE80211S_H */