AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
1a59d1b8e0
kernel_optimize_test/drivers/clk/sunxi/clk-usb.c

259 lines
7.1 KiB
C
Raw Normal View History

clk: sunxi: Move USB clocks to separate file The USB clocks originally shared code with the gates clocks, but had additional reset controllers. Move these to a separate file. This will allow us to add new support for slightly different USB clocks, such as on the A80, without affecting gates clocks, and also facilitate the migration of gates clocks to a generic solution. This also cleans up the USB clocks code slightly, such as adding newlines, getting rid of the unused clkdev call, using a simple u32 instead of BITMAP for the clock masks, using BIT() macro to declare the clock bitmasks, and using of_io_request_and_map() to get the I/O address. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:06 +08:00
/*
* Copyright 2013-2015 Emilio López
*
* Emilio López <emilio@elopez.com.ar>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
clk: sunxi: Include clk.h and remove unused clkdev.h includes This clock provider uses the consumer API, so include clk.h explicitly. Also remove clkdev.h in files that aren't using it and include slab.h when clkdev.h was being used to implicitly include it. Cc: Chen-Yu Tsai <wens@csie.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-20 06:00:46 +08:00
#include <linux/clk.h>
clk: sunxi: Move USB clocks to separate file The USB clocks originally shared code with the gates clocks, but had additional reset controllers. Move these to a separate file. This will allow us to add new support for slightly different USB clocks, such as on the A80, without affecting gates clocks, and also facilitate the migration of gates clocks to a generic solution. This also cleans up the USB clocks code slightly, such as adding newlines, getting rid of the unused clkdev call, using a simple u32 instead of BITMAP for the clock masks, using BIT() macro to declare the clock bitmasks, and using of_io_request_and_map() to get the I/O address. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:06 +08:00
#include <linux/clk-provider.h>
clk: Remove io.h from clk-provider.h Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-19 06:20:22 +08:00
#include <linux/io.h>
clk: sunxi: Move USB clocks to separate file The USB clocks originally shared code with the gates clocks, but had additional reset controllers. Move these to a separate file. This will allow us to add new support for slightly different USB clocks, such as on the A80, without affecting gates clocks, and also facilitate the migration of gates clocks to a generic solution. This also cleans up the USB clocks code slightly, such as adding newlines, getting rid of the unused clkdev call, using a simple u32 instead of BITMAP for the clock masks, using BIT() macro to declare the clock bitmasks, and using of_io_request_and_map() to get the I/O address. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:06 +08:00
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/reset-controller.h>
clk: sunxi: Include clk.h and remove unused clkdev.h includes This clock provider uses the consumer API, so include clk.h explicitly. Also remove clkdev.h in files that aren't using it and include slab.h when clkdev.h was being used to implicitly include it. Cc: Chen-Yu Tsai <wens@csie.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-20 06:00:46 +08:00
#include <linux/slab.h>
clk: sunxi: Move USB clocks to separate file The USB clocks originally shared code with the gates clocks, but had additional reset controllers. Move these to a separate file. This will allow us to add new support for slightly different USB clocks, such as on the A80, without affecting gates clocks, and also facilitate the migration of gates clocks to a generic solution. This also cleans up the USB clocks code slightly, such as adding newlines, getting rid of the unused clkdev call, using a simple u32 instead of BITMAP for the clock masks, using BIT() macro to declare the clock bitmasks, and using of_io_request_and_map() to get the I/O address. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:06 +08:00
#include <linux/spinlock.h>
/**
* sunxi_usb_reset... - reset bits in usb clk registers handling
*/
struct usb_reset_data {
void __iomem *reg;
spinlock_t *lock;
clk: sunxi: Add support for sun9i A80 USB clocks and resets The USB controller/phy clocks and reset controls are in a separate address block, unlike previous SoCs where they were in the clock controller. Also, access to the address block is controlled by a clock gate to AHB. Add support for resets requiring a clock to be enabled when asserting/deasserting the reset controls, and add the sun9i USB clocks. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:07 +08:00
struct clk *clk;
clk: sunxi: Move USB clocks to separate file The USB clocks originally shared code with the gates clocks, but had additional reset controllers. Move these to a separate file. This will allow us to add new support for slightly different USB clocks, such as on the A80, without affecting gates clocks, and also facilitate the migration of gates clocks to a generic solution. This also cleans up the USB clocks code slightly, such as adding newlines, getting rid of the unused clkdev call, using a simple u32 instead of BITMAP for the clock masks, using BIT() macro to declare the clock bitmasks, and using of_io_request_and_map() to get the I/O address. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:06 +08:00
struct reset_controller_dev rcdev;
};
static int sunxi_usb_reset_assert(struct reset_controller_dev *rcdev,
unsigned long id)
{
struct usb_reset_data *data = container_of(rcdev,
struct usb_reset_data,
rcdev);
unsigned long flags;
u32 reg;
clk: sunxi: Add support for sun9i A80 USB clocks and resets The USB controller/phy clocks and reset controls are in a separate address block, unlike previous SoCs where they were in the clock controller. Also, access to the address block is controlled by a clock gate to AHB. Add support for resets requiring a clock to be enabled when asserting/deasserting the reset controls, and add the sun9i USB clocks. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:07 +08:00
clk_prepare_enable(data->clk);
clk: sunxi: Move USB clocks to separate file The USB clocks originally shared code with the gates clocks, but had additional reset controllers. Move these to a separate file. This will allow us to add new support for slightly different USB clocks, such as on the A80, without affecting gates clocks, and also facilitate the migration of gates clocks to a generic solution. This also cleans up the USB clocks code slightly, such as adding newlines, getting rid of the unused clkdev call, using a simple u32 instead of BITMAP for the clock masks, using BIT() macro to declare the clock bitmasks, and using of_io_request_and_map() to get the I/O address. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:06 +08:00
spin_lock_irqsave(data->lock, flags);
reg = readl(data->reg);
writel(reg & ~BIT(id), data->reg);
spin_unlock_irqrestore(data->lock, flags);
clk: sunxi: Add support for sun9i A80 USB clocks and resets The USB controller/phy clocks and reset controls are in a separate address block, unlike previous SoCs where they were in the clock controller. Also, access to the address block is controlled by a clock gate to AHB. Add support for resets requiring a clock to be enabled when asserting/deasserting the reset controls, and add the sun9i USB clocks. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:07 +08:00
clk_disable_unprepare(data->clk);
clk: sunxi: Move USB clocks to separate file The USB clocks originally shared code with the gates clocks, but had additional reset controllers. Move these to a separate file. This will allow us to add new support for slightly different USB clocks, such as on the A80, without affecting gates clocks, and also facilitate the migration of gates clocks to a generic solution. This also cleans up the USB clocks code slightly, such as adding newlines, getting rid of the unused clkdev call, using a simple u32 instead of BITMAP for the clock masks, using BIT() macro to declare the clock bitmasks, and using of_io_request_and_map() to get the I/O address. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:06 +08:00
return 0;
}
static int sunxi_usb_reset_deassert(struct reset_controller_dev *rcdev,
unsigned long id)
{
struct usb_reset_data *data = container_of(rcdev,
struct usb_reset_data,
rcdev);
unsigned long flags;
u32 reg;
clk: sunxi: Add support for sun9i A80 USB clocks and resets The USB controller/phy clocks and reset controls are in a separate address block, unlike previous SoCs where they were in the clock controller. Also, access to the address block is controlled by a clock gate to AHB. Add support for resets requiring a clock to be enabled when asserting/deasserting the reset controls, and add the sun9i USB clocks. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:07 +08:00
clk_prepare_enable(data->clk);
clk: sunxi: Move USB clocks to separate file The USB clocks originally shared code with the gates clocks, but had additional reset controllers. Move these to a separate file. This will allow us to add new support for slightly different USB clocks, such as on the A80, without affecting gates clocks, and also facilitate the migration of gates clocks to a generic solution. This also cleans up the USB clocks code slightly, such as adding newlines, getting rid of the unused clkdev call, using a simple u32 instead of BITMAP for the clock masks, using BIT() macro to declare the clock bitmasks, and using of_io_request_and_map() to get the I/O address. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:06 +08:00
spin_lock_irqsave(data->lock, flags);
reg = readl(data->reg);
writel(reg | BIT(id), data->reg);
spin_unlock_irqrestore(data->lock, flags);
clk: sunxi: Add support for sun9i A80 USB clocks and resets The USB controller/phy clocks and reset controls are in a separate address block, unlike previous SoCs where they were in the clock controller. Also, access to the address block is controlled by a clock gate to AHB. Add support for resets requiring a clock to be enabled when asserting/deasserting the reset controls, and add the sun9i USB clocks. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:07 +08:00
clk_disable_unprepare(data->clk);
clk: sunxi: Move USB clocks to separate file The USB clocks originally shared code with the gates clocks, but had additional reset controllers. Move these to a separate file. This will allow us to add new support for slightly different USB clocks, such as on the A80, without affecting gates clocks, and also facilitate the migration of gates clocks to a generic solution. This also cleans up the USB clocks code slightly, such as adding newlines, getting rid of the unused clkdev call, using a simple u32 instead of BITMAP for the clock masks, using BIT() macro to declare the clock bitmasks, and using of_io_request_and_map() to get the I/O address. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:06 +08:00
return 0;
}
clk: sunxi: Make reset_control_ops const The sunxi_ve_reset_ops, sun9i_mmc_reset_ops, and sunxi_usb_reset_ops structures are never modified. Make them const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-25 17:45:10 +08:00
static const struct reset_control_ops sunxi_usb_reset_ops = {
clk: sunxi: Move USB clocks to separate file The USB clocks originally shared code with the gates clocks, but had additional reset controllers. Move these to a separate file. This will allow us to add new support for slightly different USB clocks, such as on the A80, without affecting gates clocks, and also facilitate the migration of gates clocks to a generic solution. This also cleans up the USB clocks code slightly, such as adding newlines, getting rid of the unused clkdev call, using a simple u32 instead of BITMAP for the clock masks, using BIT() macro to declare the clock bitmasks, and using of_io_request_and_map() to get the I/O address. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:06 +08:00
.assert = sunxi_usb_reset_assert,
.deassert = sunxi_usb_reset_deassert,
};
/**
* sunxi_usb_clk_setup() - Setup function for usb gate clocks
*/
#define SUNXI_USB_MAX_SIZE 32
struct usb_clk_data {
u32 clk_mask;
u32 reset_mask;
clk: sunxi: Add support for sun9i A80 USB clocks and resets The USB controller/phy clocks and reset controls are in a separate address block, unlike previous SoCs where they were in the clock controller. Also, access to the address block is controlled by a clock gate to AHB. Add support for resets requiring a clock to be enabled when asserting/deasserting the reset controls, and add the sun9i USB clocks. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:07 +08:00
bool reset_needs_clk;
clk: sunxi: Move USB clocks to separate file The USB clocks originally shared code with the gates clocks, but had additional reset controllers. Move these to a separate file. This will allow us to add new support for slightly different USB clocks, such as on the A80, without affecting gates clocks, and also facilitate the migration of gates clocks to a generic solution. This also cleans up the USB clocks code slightly, such as adding newlines, getting rid of the unused clkdev call, using a simple u32 instead of BITMAP for the clock masks, using BIT() macro to declare the clock bitmasks, and using of_io_request_and_map() to get the I/O address. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:06 +08:00
};
static void __init sunxi_usb_clk_setup(struct device_node *node,
const struct usb_clk_data *data,
spinlock_t *lock)
{
struct clk_onecell_data *clk_data;
struct usb_reset_data *reset_data;
const char *clk_parent;
const char *clk_name;
void __iomem *reg;
int qty;
int i = 0;
int j = 0;
reg = of_io_request_and_map(node, 0, of_node_full_name(node));
if (IS_ERR(reg))
return;
clk_parent = of_clk_get_parent_name(node, 0);
if (!clk_parent)
return;
/* Worst-case size approximation and memory allocation */
qty = find_last_bit((unsigned long *)&data->clk_mask,
SUNXI_USB_MAX_SIZE);
clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL);
if (!clk_data)
return;
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:03:40 +08:00
clk_data->clks = kcalloc(qty + 1, sizeof(struct clk *), GFP_KERNEL);
clk: sunxi: Move USB clocks to separate file The USB clocks originally shared code with the gates clocks, but had additional reset controllers. Move these to a separate file. This will allow us to add new support for slightly different USB clocks, such as on the A80, without affecting gates clocks, and also facilitate the migration of gates clocks to a generic solution. This also cleans up the USB clocks code slightly, such as adding newlines, getting rid of the unused clkdev call, using a simple u32 instead of BITMAP for the clock masks, using BIT() macro to declare the clock bitmasks, and using of_io_request_and_map() to get the I/O address. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:06 +08:00
if (!clk_data->clks) {
kfree(clk_data);
return;
}
for_each_set_bit(i, (unsigned long *)&data->clk_mask,
SUNXI_USB_MAX_SIZE) {
of_property_read_string_index(node, "clock-output-names",
j, &clk_name);
clk_data->clks[i] = clk_register_gate(NULL, clk_name,
clk_parent, 0,
reg, i, 0, lock);
WARN_ON(IS_ERR(clk_data->clks[i]));
j++;
}
/* Adjust to the real max */
clk_data->clk_num = i;
of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
/* Register a reset controller for usb with reset bits */
if (data->reset_mask == 0)
return;
reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL);
if (!reset_data)
return;
clk: sunxi: Add support for sun9i A80 USB clocks and resets The USB controller/phy clocks and reset controls are in a separate address block, unlike previous SoCs where they were in the clock controller. Also, access to the address block is controlled by a clock gate to AHB. Add support for resets requiring a clock to be enabled when asserting/deasserting the reset controls, and add the sun9i USB clocks. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:07 +08:00
if (data->reset_needs_clk) {
reset_data->clk = of_clk_get(node, 0);
if (IS_ERR(reset_data->clk)) {
pr_err("Could not get clock for reset controls\n");
kfree(reset_data);
return;
}
}
clk: sunxi: Move USB clocks to separate file The USB clocks originally shared code with the gates clocks, but had additional reset controllers. Move these to a separate file. This will allow us to add new support for slightly different USB clocks, such as on the A80, without affecting gates clocks, and also facilitate the migration of gates clocks to a generic solution. This also cleans up the USB clocks code slightly, such as adding newlines, getting rid of the unused clkdev call, using a simple u32 instead of BITMAP for the clock masks, using BIT() macro to declare the clock bitmasks, and using of_io_request_and_map() to get the I/O address. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:06 +08:00
reset_data->reg = reg;
reset_data->lock = lock;
reset_data->rcdev.nr_resets = __fls(data->reset_mask) + 1;
reset_data->rcdev.ops = &sunxi_usb_reset_ops;
reset_data->rcdev.of_node = node;
reset_controller_register(&reset_data->rcdev);
}
static const struct usb_clk_data sun4i_a10_usb_clk_data __initconst = {
.clk_mask = BIT(8) | BIT(7) | BIT(6),
.reset_mask = BIT(2) | BIT(1) | BIT(0),
};
static DEFINE_SPINLOCK(sun4i_a10_usb_lock);
static void __init sun4i_a10_usb_setup(struct device_node *node)
{
sunxi_usb_clk_setup(node, &sun4i_a10_usb_clk_data, &sun4i_a10_usb_lock);
}
CLK_OF_DECLARE(sun4i_a10_usb, "allwinner,sun4i-a10-usb-clk", sun4i_a10_usb_setup);
static const struct usb_clk_data sun5i_a13_usb_clk_data __initconst = {
.clk_mask = BIT(8) | BIT(6),
.reset_mask = BIT(1) | BIT(0),
};
static void __init sun5i_a13_usb_setup(struct device_node *node)
{
sunxi_usb_clk_setup(node, &sun5i_a13_usb_clk_data, &sun4i_a10_usb_lock);
}
CLK_OF_DECLARE(sun5i_a13_usb, "allwinner,sun5i-a13-usb-clk", sun5i_a13_usb_setup);
static const struct usb_clk_data sun6i_a31_usb_clk_data __initconst = {
.clk_mask = BIT(18) | BIT(17) | BIT(16) | BIT(10) | BIT(9) | BIT(8),
.reset_mask = BIT(2) | BIT(1) | BIT(0),
};
static void __init sun6i_a31_usb_setup(struct device_node *node)
{
sunxi_usb_clk_setup(node, &sun6i_a31_usb_clk_data, &sun4i_a10_usb_lock);
}
CLK_OF_DECLARE(sun6i_a31_usb, "allwinner,sun6i-a31-usb-clk", sun6i_a31_usb_setup);
clk: sunxi: Add support for sun9i A80 USB clocks and resets The USB controller/phy clocks and reset controls are in a separate address block, unlike previous SoCs where they were in the clock controller. Also, access to the address block is controlled by a clock gate to AHB. Add support for resets requiring a clock to be enabled when asserting/deasserting the reset controls, and add the sun9i USB clocks. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:07 +08:00
clk: sunxi: Add support for the usb-clk on sun8i a23 and a33 SoCs The usb-clk on sun8i a23 and a33 SoCs is similar to the ones found on sun6i-a31 SoCs but instead of a 3th phy the a23 / a33 have a hsic interface which gets enabled by almost the same bits as used on the a31 for the 3rd phy, but not exactly the same bits so we need a new compatible for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2015-06-02 02:23:27 +08:00
static const struct usb_clk_data sun8i_a23_usb_clk_data __initconst = {
.clk_mask = BIT(16) | BIT(11) | BIT(10) | BIT(9) | BIT(8),
.reset_mask = BIT(2) | BIT(1) | BIT(0),
};
static void __init sun8i_a23_usb_setup(struct device_node *node)
{
sunxi_usb_clk_setup(node, &sun8i_a23_usb_clk_data, &sun4i_a10_usb_lock);
}
CLK_OF_DECLARE(sun8i_a23_usb, "allwinner,sun8i-a23-usb-clk", sun8i_a23_usb_setup);
clk: sunxi: usb: Sort clk providers by chip family and name The latest addition of H3 USB clocks placed them at the bottom. Move it before A80 (sun9i), so they are sorted by SoC family then name. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-01-25 13:55:00 +08:00
static const struct usb_clk_data sun8i_h3_usb_clk_data __initconst = {
.clk_mask = BIT(19) | BIT(18) | BIT(17) | BIT(16) |
BIT(11) | BIT(10) | BIT(9) | BIT(8),
.reset_mask = BIT(3) | BIT(2) | BIT(1) | BIT(0),
};
static void __init sun8i_h3_usb_setup(struct device_node *node)
{
sunxi_usb_clk_setup(node, &sun8i_h3_usb_clk_data, &sun4i_a10_usb_lock);
}
CLK_OF_DECLARE(sun8i_h3_usb, "allwinner,sun8i-h3-usb-clk", sun8i_h3_usb_setup);
clk: sunxi: Add support for sun9i A80 USB clocks and resets The USB controller/phy clocks and reset controls are in a separate address block, unlike previous SoCs where they were in the clock controller. Also, access to the address block is controlled by a clock gate to AHB. Add support for resets requiring a clock to be enabled when asserting/deasserting the reset controls, and add the sun9i USB clocks. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-28 03:54:07 +08:00
static const struct usb_clk_data sun9i_a80_usb_mod_data __initconst = {
.clk_mask = BIT(6) | BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1),
.reset_mask = BIT(19) | BIT(18) | BIT(17),
.reset_needs_clk = 1,
};
static DEFINE_SPINLOCK(a80_usb_mod_lock);
static void __init sun9i_a80_usb_mod_setup(struct device_node *node)
{
sunxi_usb_clk_setup(node, &sun9i_a80_usb_mod_data, &a80_usb_mod_lock);
}
CLK_OF_DECLARE(sun9i_a80_usb_mod, "allwinner,sun9i-a80-usb-mod-clk", sun9i_a80_usb_mod_setup);
static const struct usb_clk_data sun9i_a80_usb_phy_data __initconst = {
.clk_mask = BIT(10) | BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1),
.reset_mask = BIT(21) | BIT(20) | BIT(19) | BIT(18) | BIT(17),
.reset_needs_clk = 1,
};
static DEFINE_SPINLOCK(a80_usb_phy_lock);
static void __init sun9i_a80_usb_phy_setup(struct device_node *node)
{
sunxi_usb_clk_setup(node, &sun9i_a80_usb_phy_data, &a80_usb_phy_lock);
}
CLK_OF_DECLARE(sun9i_a80_usb_phy, "allwinner,sun9i-a80-usb-phy-clk", sun9i_a80_usb_phy_setup);
Copy Permalink