AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
221b2fb818
kernel_optimize_test/include/asm-sparc64/pgtable.h

324 lines
11 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* $Id: pgtable.h,v 1.156 2002/02/09 19:49:31 davem Exp $
* pgtable.h: SpitFire page table operations.
*
* Copyright 1996,1997 David S. Miller (davem@caip.rutgers.edu)
* Copyright 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
*/
#ifndef _SPARC64_PGTABLE_H
#define _SPARC64_PGTABLE_H
/* This file contains the functions and defines necessary to modify and use
* the SpitFire page tables.
*/
#include <asm-generic/pgtable-nopud.h>
#include <linux/config.h>
#include <linux/compiler.h>
#include <asm/types.h>
#include <asm/spitfire.h>
#include <asm/asi.h>
#include <asm/system.h>
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/const.h>
[SPARC64]: Verify vmalloc TLB misses more strictly. Arrange the modules, OBP, and vmalloc areas such that a range verification can be done quite minimally. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-21 03:18:38 +08:00
/* The kernel image occupies 0x4000000 to 0x1000000 (4MB --> 32MB).
[SPARC64]: Move away from virtual page tables, part 1. We now use the TSB hardware assist features of the UltraSPARC MMUs. SMP is currently knowingly broken, we need to find another place to store the per-cpu base pointers. We hid them away in the TSB base register, and that obviously will not work any more :-) Another known broken case is non-8KB base page size. Also noticed that flush_tlb_all() is not referenced anywhere, only the internal __flush_tlb_all() (local cpu only) is used by the sparc64 port, so we can get rid of flush_tlb_all(). The kernel gets it's own 8KB TSB (swapper_tsb) and each address space gets it's own private 8K TSB. Later we can add code to dynamically increase the size of per-process TSB as the RSS grows. An 8KB TSB is good enough for up to about a 4MB RSS, after which the TSB starts to incur many capacity and conflict misses. We even accumulate OBP translations into the kernel TSB. Another area for refinement is large page size support. We could use a secondary address space TSB to handle those. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-01 10:29:18 +08:00
* The page copy blockops can use 0x2000000 to 0x4000000.
* The TSB is mapped in the 0x4000000 to 0x6000000 range.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* The PROM resides in an area spanning 0xf0000000 to 0x100000000.
[SPARC64]: Verify vmalloc TLB misses more strictly. Arrange the modules, OBP, and vmalloc areas such that a range verification can be done quite minimally. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-21 03:18:38 +08:00
* The vmalloc area spans 0x100000000 to 0x200000000.
* Since modules need to be in the lowest 32-bits of the address space,
* we place them right before the OBP area from 0x10000000 to 0xf0000000.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* There is a single static kernel PMD which maps from 0x0 to address
* 0x400000000.
*/
[SPARC64]: Verify vmalloc TLB misses more strictly. Arrange the modules, OBP, and vmalloc areas such that a range verification can be done quite minimally. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-21 03:18:38 +08:00
#define TLBTEMP_BASE _AC(0x0000000002000000,UL)
[SPARC64]: Move away from virtual page tables, part 1. We now use the TSB hardware assist features of the UltraSPARC MMUs. SMP is currently knowingly broken, we need to find another place to store the per-cpu base pointers. We hid them away in the TSB base register, and that obviously will not work any more :-) Another known broken case is non-8KB base page size. Also noticed that flush_tlb_all() is not referenced anywhere, only the internal __flush_tlb_all() (local cpu only) is used by the sparc64 port, so we can get rid of flush_tlb_all(). The kernel gets it's own 8KB TSB (swapper_tsb) and each address space gets it's own private 8K TSB. Later we can add code to dynamically increase the size of per-process TSB as the RSS grows. An 8KB TSB is good enough for up to about a 4MB RSS, after which the TSB starts to incur many capacity and conflict misses. We even accumulate OBP translations into the kernel TSB. Another area for refinement is large page size support. We could use a secondary address space TSB to handle those. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-01 10:29:18 +08:00
#define TSBMAP_BASE _AC(0x0000000004000000,UL)
[SPARC64]: Verify vmalloc TLB misses more strictly. Arrange the modules, OBP, and vmalloc areas such that a range verification can be done quite minimally. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-21 03:18:38 +08:00
#define MODULES_VADDR _AC(0x0000000010000000,UL)
#define MODULES_LEN _AC(0x00000000e0000000,UL)
#define MODULES_END _AC(0x00000000f0000000,UL)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define LOW_OBP_ADDRESS _AC(0x00000000f0000000,UL)
#define HI_OBP_ADDRESS _AC(0x0000000100000000,UL)
[SPARC64]: Verify vmalloc TLB misses more strictly. Arrange the modules, OBP, and vmalloc areas such that a range verification can be done quite minimally. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-21 03:18:38 +08:00
#define VMALLOC_START _AC(0x0000000100000000,UL)
#define VMALLOC_END _AC(0x0000000200000000,UL)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* XXX All of this needs to be rethought so we can take advantage
* XXX cheetah's full 64-bit virtual address space, ie. no more hole
* XXX in the middle like on spitfire. -DaveM
*/
/*
* Given a virtual address, the lowest PAGE_SHIFT bits determine offset
* into the page; the next higher PAGE_SHIFT-3 bits determine the pte#
* in the proper pagetable (the -3 is from the 8 byte ptes, and each page
* table is a single page long). The next higher PMD_BITS determine pmd#
* in the proper pmdtable (where we must have PMD_BITS <= (PAGE_SHIFT-2)
* since the pmd entries are 4 bytes, and each pmd page is a single page
* long). Finally, the higher few bits determine pgde#.
*/
/* PMD_SHIFT determines the size of the area a second-level page
* table can map
*/
#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT-3))
[SPARC64]: Add CONFIG_DEBUG_PAGEALLOC support. The trick is that we do the kernel linear mapping TLB miss starting with an instruction sequence like this: ba,pt %xcc, kvmap_load xor %g2, %g4, %g5 succeeded by an instruction sequence which performs a full page table walk starting at swapper_pg_dir. We first take over the trap table from the firmware. Then, using this constant PTE generation for the linear mapping area above, we build the kernel page tables for the linear mapping. After this is setup, we patch that branch above into a "nop", which will cause TLB misses to fall through to the full page table walk. With this, the page unmapping for CONFIG_DEBUG_PAGEALLOC is trivial. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26 07:46:57 +08:00
#define PMD_SIZE (_AC(1,UL) << PMD_SHIFT)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PMD_MASK (~(PMD_SIZE-1))
#define PMD_BITS (PAGE_SHIFT - 2)
/* PGDIR_SHIFT determines what a third-level page table entry can map */
#define PGDIR_SHIFT (PAGE_SHIFT + (PAGE_SHIFT-3) + PMD_BITS)
[SPARC64]: Add CONFIG_DEBUG_PAGEALLOC support. The trick is that we do the kernel linear mapping TLB miss starting with an instruction sequence like this: ba,pt %xcc, kvmap_load xor %g2, %g4, %g5 succeeded by an instruction sequence which performs a full page table walk starting at swapper_pg_dir. We first take over the trap table from the firmware. Then, using this constant PTE generation for the linear mapping area above, we build the kernel page tables for the linear mapping. After this is setup, we patch that branch above into a "nop", which will cause TLB misses to fall through to the full page table walk. With this, the page unmapping for CONFIG_DEBUG_PAGEALLOC is trivial. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26 07:46:57 +08:00
#define PGDIR_SIZE (_AC(1,UL) << PGDIR_SHIFT)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PGDIR_MASK (~(PGDIR_SIZE-1))
#define PGDIR_BITS (PAGE_SHIFT - 2)
#ifndef __ASSEMBLY__
#include <linux/sched.h>
/* Entries per page directory level. */
#define PTRS_PER_PTE (1UL << (PAGE_SHIFT-3))
#define PTRS_PER_PMD (1UL << PMD_BITS)
#define PTRS_PER_PGD (1UL << PGDIR_BITS)
/* Kernel has a separate 44bit address space. */
[PATCH] freepgt: arch FIRST_USER_ADDRESS 0 Replace misleading definition of FIRST_USER_PGD_NR 0 by definition of FIRST_USER_ADDRESS 0 in all the MMU architectures beyond arm and arm26. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-20 04:29:23 +08:00
#define FIRST_USER_ADDRESS 0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define pte_ERROR(e) __builtin_trap()
#define pmd_ERROR(e) __builtin_trap()
#define pgd_ERROR(e) __builtin_trap()
#endif /* !(__ASSEMBLY__) */
[SPARC64]: Deal with PTE layout differences in SUN4V. Yes, you heard it right, they changed the PTE layout for SUN4V. Ho hum... This is the simple and inefficient way to support this. It'll get optimized, don't worry. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-12 13:57:54 +08:00
/* PTE bits which are the same in SUN4U and SUN4V format. */
#define _PAGE_VALID 0x8000000000000000 /* Valid TTE */
#define _PAGE_R 0x8000000000000000 /* Keep ref bit up to date*/
/* These are actually filled in at boot time by sun4{u,v}_pgprot_init() */
#define __P000 __pgprot(0)
#define __P001 __pgprot(0)
#define __P010 __pgprot(0)
#define __P011 __pgprot(0)
#define __P100 __pgprot(0)
#define __P101 __pgprot(0)
#define __P110 __pgprot(0)
#define __P111 __pgprot(0)
#define __S000 __pgprot(0)
#define __S001 __pgprot(0)
#define __S010 __pgprot(0)
#define __S011 __pgprot(0)
#define __S100 __pgprot(0)
#define __S101 __pgprot(0)
#define __S110 __pgprot(0)
#define __S111 __pgprot(0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifndef __ASSEMBLY__
[SPARC64]: Deal with PTE layout differences in SUN4V. Yes, you heard it right, they changed the PTE layout for SUN4V. Ho hum... This is the simple and inefficient way to support this. It'll get optimized, don't worry. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-12 13:57:54 +08:00
extern pte_t mk_pte_io(unsigned long, pgprot_t, int, unsigned long);
extern unsigned long pte_sz_bits(unsigned long size);
extern pgprot_t PAGE_KERNEL;
extern pgprot_t PAGE_KERNEL_LOCKED;
extern pgprot_t PAGE_COPY;
/* XXX This uglyness is for the atyfb driver's sparc mmap() support. XXX */
extern unsigned long _PAGE_IE;
extern unsigned long _PAGE_E;
extern unsigned long _PAGE_CACHE;
extern unsigned long pg_iobits;
extern unsigned long _PAGE_ALL_SZ_BITS;
extern unsigned long _PAGE_SZBITS;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern unsigned long phys_base;
extern unsigned long pfn_base;
extern struct page *mem_map_zero;
#define ZERO_PAGE(vaddr) (mem_map_zero)
/* PFNs are real physical page numbers. However, mem_map only begins to record
* per-page information starting at pfn_base. This is to handle systems where
* the first physical page in the machine is at some huge physical address,
* such as 4GB. This is common on a partitioned E10000, for example.
*/
[SPARC64]: Deal with PTE layout differences in SUN4V. Yes, you heard it right, they changed the PTE layout for SUN4V. Ho hum... This is the simple and inefficient way to support this. It'll get optimized, don't worry. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-12 13:57:54 +08:00
extern pte_t pfn_pte(unsigned long, pgprot_t);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
[SPARC64]: Deal with PTE layout differences in SUN4V. Yes, you heard it right, they changed the PTE layout for SUN4V. Ho hum... This is the simple and inefficient way to support this. It'll get optimized, don't worry. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-12 13:57:54 +08:00
extern unsigned long pte_pfn(pte_t);
#define pte_page(x) pfn_to_page(pte_pfn(x))
extern pte_t pte_modify(pte_t, pgprot_t);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define pmd_set(pmdp, ptep) \
(pmd_val(*(pmdp)) = (__pa((unsigned long) (ptep)) >> 11UL))
#define pud_set(pudp, pmdp) \
(pud_val(*(pudp)) = (__pa((unsigned long) (pmdp)) >> 11UL))
#define __pmd_page(pmd) \
((unsigned long) __va((((unsigned long)pmd_val(pmd))<<11UL)))
#define pmd_page(pmd) virt_to_page((void *)__pmd_page(pmd))
#define pud_page(pud) \
((unsigned long) __va((((unsigned long)pud_val(pud))<<11UL)))
#define pmd_none(pmd) (!pmd_val(pmd))
#define pmd_bad(pmd) (0)
#define pmd_present(pmd) (pmd_val(pmd) != 0U)
#define pmd_clear(pmdp) (pmd_val(*(pmdp)) = 0U)
#define pud_none(pud) (!pud_val(pud))
#define pud_bad(pud) (0)
#define pud_present(pud) (pud_val(pud) != 0U)
#define pud_clear(pudp) (pud_val(*(pudp)) = 0U)
[SPARC64]: Deal with PTE layout differences in SUN4V. Yes, you heard it right, they changed the PTE layout for SUN4V. Ho hum... This is the simple and inefficient way to support this. It'll get optimized, don't worry. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-12 13:57:54 +08:00
/* Same in both SUN4V and SUN4U. */
#define pte_none(pte) (!pte_val(pte))
extern unsigned long pte_present(pte_t);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* The following only work if pte_present() is true.
* Undefined behaviour if not..
*/
[SPARC64]: Deal with PTE layout differences in SUN4V. Yes, you heard it right, they changed the PTE layout for SUN4V. Ho hum... This is the simple and inefficient way to support this. It'll get optimized, don't worry. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-12 13:57:54 +08:00
extern unsigned long pte_read(pte_t);
extern unsigned long pte_exec(pte_t);
extern unsigned long pte_write(pte_t);
extern unsigned long pte_dirty(pte_t);
extern unsigned long pte_young(pte_t);
extern pte_t pte_wrprotect(pte_t);
extern pte_t pte_rdprotect(pte_t);
extern pte_t pte_mkclean(pte_t);
extern pte_t pte_mkold(pte_t);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Be very careful when you change these three, they are delicate. */
[SPARC64]: Deal with PTE layout differences in SUN4V. Yes, you heard it right, they changed the PTE layout for SUN4V. Ho hum... This is the simple and inefficient way to support this. It'll get optimized, don't worry. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-12 13:57:54 +08:00
extern pte_t pte_mkyoung(pte_t);
extern pte_t pte_mkwrite(pte_t);
extern pte_t pte_mkdirty(pte_t);
extern pte_t pte_mkhuge(pte_t);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* to find an entry in a page-table-directory. */
#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
/* to find an entry in a kernel page-table-directory */
#define pgd_offset_k(address) pgd_offset(&init_mm, address)
/* Find an entry in the second-level page table.. */
#define pmd_offset(pudp, address) \
((pmd_t *) pud_page(*(pudp)) + \
(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)))
/* Find an entry in the third-level page table.. */
#define pte_index(dir, address) \
((pte_t *) __pmd_page(*(dir)) + \
((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
#define pte_offset_kernel pte_index
#define pte_offset_map pte_index
#define pte_offset_map_nested pte_index
#define pte_unmap(pte) do { } while (0)
#define pte_unmap_nested(pte) do { } while (0)
/* Actual page table PTE updates. */
extern void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig);
static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte)
{
pte_t orig = *ptep;
*ptep = pte;
/* It is more efficient to let flush_tlb_kernel_range()
* handle init_mm tlb flushes.
[SPARC64]: Deal with PTE layout differences in SUN4V. Yes, you heard it right, they changed the PTE layout for SUN4V. Ho hum... This is the simple and inefficient way to support this. It'll get optimized, don't worry. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-12 13:57:54 +08:00
*
* SUN4V NOTE: _PAGE_VALID is the same value in both the SUN4U
* and SUN4V pte layout, so this inline test is fine.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
if (likely(mm != &init_mm) && (pte_val(orig) & _PAGE_VALID))
tlb_batch_add(mm, addr, ptep, orig);
}
#define pte_clear(mm,addr,ptep) \
set_pte_at((mm), (addr), (ptep), __pte(0UL))
[SPARC64]: Add CONFIG_DEBUG_PAGEALLOC support. The trick is that we do the kernel linear mapping TLB miss starting with an instruction sequence like this: ba,pt %xcc, kvmap_load xor %g2, %g4, %g5 succeeded by an instruction sequence which performs a full page table walk starting at swapper_pg_dir. We first take over the trap table from the firmware. Then, using this constant PTE generation for the linear mapping area above, we build the kernel page tables for the linear mapping. After this is setup, we patch that branch above into a "nop", which will cause TLB misses to fall through to the full page table walk. With this, the page unmapping for CONFIG_DEBUG_PAGEALLOC is trivial. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26 07:46:57 +08:00
extern pgd_t swapper_pg_dir[2048];
extern pmd_t swapper_low_pmd_dir[2048];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[SPARC]: Declare paging_init() in asm/pgtable.h Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-29 12:31:25 +08:00
extern void paging_init(void);
[SPARC64]: Kill all external references to sp_banks[] Thus, we can mark sp_banks[] static in arch/sparc64/mm/init.c Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-29 12:46:43 +08:00
extern unsigned long find_ecache_flush_span(unsigned long size);
[SPARC]: Declare paging_init() in asm/pgtable.h Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-29 12:31:25 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* These do nothing with the way I have things setup. */
#define mmu_lockarea(vaddr, len) (vaddr)
#define mmu_unlockarea(vaddr, len) do { } while(0)
struct vm_area_struct;
extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
/* Encode and de-code a swap entry */
#define __swp_type(entry) (((entry).val >> PAGE_SHIFT) & 0xffUL)
#define __swp_offset(entry) ((entry).val >> (PAGE_SHIFT + 8UL))
#define __swp_entry(type, offset) \
( (swp_entry_t) \
{ \
(((long)(type) << PAGE_SHIFT) | \
((long)(offset) << (PAGE_SHIFT + 8UL))) \
} )
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
/* File offset in PTE support. */
[SPARC64]: Deal with PTE layout differences in SUN4V. Yes, you heard it right, they changed the PTE layout for SUN4V. Ho hum... This is the simple and inefficient way to support this. It'll get optimized, don't worry. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-12 13:57:54 +08:00
extern unsigned long pte_file(pte_t);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define pte_to_pgoff(pte) (pte_val(pte) >> PAGE_SHIFT)
[SPARC64]: Deal with PTE layout differences in SUN4V. Yes, you heard it right, they changed the PTE layout for SUN4V. Ho hum... This is the simple and inefficient way to support this. It'll get optimized, don't worry. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-12 13:57:54 +08:00
extern pte_t pgoff_to_pte(unsigned long);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PTE_FILE_MAX_BITS (64UL - PAGE_SHIFT - 1UL)
extern unsigned long prom_virt_to_phys(unsigned long, int *);
[SPARC64]: Deal with PTE layout differences in SUN4V. Yes, you heard it right, they changed the PTE layout for SUN4V. Ho hum... This is the simple and inefficient way to support this. It'll get optimized, don't worry. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-12 13:57:54 +08:00
extern unsigned long sun4u_get_pte(unsigned long);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[SPARC64]: Deal with PTE layout differences in SUN4V. Yes, you heard it right, they changed the PTE layout for SUN4V. Ho hum... This is the simple and inefficient way to support this. It'll get optimized, don't worry. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-12 13:57:54 +08:00
static inline unsigned long __get_phys(unsigned long addr)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[SPARC64]: Deal with PTE layout differences in SUN4V. Yes, you heard it right, they changed the PTE layout for SUN4V. Ho hum... This is the simple and inefficient way to support this. It'll get optimized, don't worry. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-12 13:57:54 +08:00
return sun4u_get_pte(addr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[SPARC64]: Deal with PTE layout differences in SUN4V. Yes, you heard it right, they changed the PTE layout for SUN4V. Ho hum... This is the simple and inefficient way to support this. It'll get optimized, don't worry. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-12 13:57:54 +08:00
static inline int __get_iospace(unsigned long addr)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[SPARC64]: Deal with PTE layout differences in SUN4V. Yes, you heard it right, they changed the PTE layout for SUN4V. Ho hum... This is the simple and inefficient way to support this. It'll get optimized, don't worry. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-12 13:57:54 +08:00
return ((sun4u_get_pte(addr) & 0xf0000000) >> 28);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
extern unsigned long *sparc64_valid_addr_bitmap;
/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
#define kern_addr_valid(addr) \
(test_bit(__pa((unsigned long)(addr))>>22, sparc64_valid_addr_bitmap))
extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
unsigned long pfn,
unsigned long size, pgprot_t prot);
[SPARC64]: Provide a pgprot_noncached() implementation. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-22 12:41:33 +08:00
/* Clear virtual and physical cachability, set side-effect bit. */
[SPARC64]: Deal with PTE layout differences in SUN4V. Yes, you heard it right, they changed the PTE layout for SUN4V. Ho hum... This is the simple and inefficient way to support this. It'll get optimized, don't worry. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-12 13:57:54 +08:00
extern pgprot_t pgprot_noncached(pgprot_t);
[SPARC64]: Provide a pgprot_noncached() implementation. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-22 12:41:33 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
* its high 4 bits. These macros/functions put it there or get it from there.
*/
#define MK_IOSPACE_PFN(space, pfn) (pfn | (space << (BITS_PER_LONG - 4)))
#define GET_IOSPACE(pfn) (pfn >> (BITS_PER_LONG - 4))
#define GET_PFN(pfn) (pfn & 0x0fffffffffffffffUL)
#include <asm-generic/pgtable.h>
/* We provide our own get_unmapped_area to cope with VA holes for userland */
#define HAVE_ARCH_UNMAPPED_AREA
/* We provide a special get_unmapped_area for framebuffer mmaps to try and use
* the largest alignment possible such that larget PTEs can be used.
*/
extern unsigned long get_fb_unmapped_area(struct file *filp, unsigned long,
unsigned long, unsigned long,
unsigned long);
#define HAVE_ARCH_FB_UNMAPPED_AREA
[SPARC64]: Kill pgtable quicklists and use SLAB. Taking a nod from the powerpc port. With the per-cpu caching of both the page allocator and SLAB, the pgtable quicklist scheme becomes relatively silly and primitive. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-01 10:30:27 +08:00
extern void pgtable_cache_init(void);
[SPARC64]: Register per-cpu fault status area with sun4v hypervisor. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-08 13:51:08 +08:00
extern void sun4v_register_fault_status(void);
[SPARC64]: Register kernel TSB with hypervisor. We do this right after we take over the trap table from OBP. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-12 06:41:18 +08:00
extern void sun4v_ktsb_register(void);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif /* !(__ASSEMBLY__) */
#endif /* !(_SPARC64_PGTABLE_H) */
Copy Permalink