AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
291f006efe
kernel_optimize_test/drivers/media/dvb/firesat/firesat.h

228 lines
5.4 KiB
C
Raw Normal View History

firesat: update isochronous interface, add CI support I have finally managed to get the CI support for the card working. The implementation is a bare minimum to get encrypted channels to work in kaffeine. It works fine with my T/CI card. Now and then I get an AVC timeout and have to retune a channel in order to get it to work. Once the CAM seemed to hang so I needed to remove and insert it again. I.e. there are a number of glitches. The latest version contains the following changes: - Implemented the new hpsb iso interface so that data can be received from the card - Reduced some timers for demux setup which caused scanning to timeout - Added possibility to unload driver - Added support for getting C/N ratio - Added two debug parameters to the driver; ca_debug and avc_comm_debug. - Added CI support that works for me in kaffeine - Started working on CI MMI support. It now supports: o Enter menu o Receiving MMI objects - Added support for 64-bit platforms - Corrected DVB-C modulations problems Signed-off-by: Henrik Kurelid <henrik@kurelid.se> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (rebased, whitespace)
2008-08-01 16:00:45 +08:00
/*
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-26 06:17:30 +08:00
* FireDTV driver (formerly known as FireSAT)
firesat: update isochronous interface, add CI support I have finally managed to get the CI support for the card working. The implementation is a bare minimum to get encrypted channels to work in kaffeine. It works fine with my T/CI card. Now and then I get an AVC timeout and have to retune a channel in order to get it to work. Once the CAM seemed to hang so I needed to remove and insert it again. I.e. there are a number of glitches. The latest version contains the following changes: - Implemented the new hpsb iso interface so that data can be received from the card - Reduced some timers for demux setup which caused scanning to timeout - Added possibility to unload driver - Added support for getting C/N ratio - Added two debug parameters to the driver; ca_debug and avc_comm_debug. - Added CI support that works for me in kaffeine - Started working on CI MMI support. It now supports: o Enter menu o Receiving MMI objects - Added support for 64-bit platforms - Corrected DVB-C modulations problems Signed-off-by: Henrik Kurelid <henrik@kurelid.se> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (rebased, whitespace)
2008-08-01 16:00:45 +08:00
*
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-26 06:17:30 +08:00
* Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
* Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
firesat: update isochronous interface, add CI support I have finally managed to get the CI support for the card working. The implementation is a bare minimum to get encrypted channels to work in kaffeine. It works fine with my T/CI card. Now and then I get an AVC timeout and have to retune a channel in order to get it to work. Once the CAM seemed to hang so I needed to remove and insert it again. I.e. there are a number of glitches. The latest version contains the following changes: - Implemented the new hpsb iso interface so that data can be received from the card - Reduced some timers for demux setup which caused scanning to timeout - Added possibility to unload driver - Added support for getting C/N ratio - Added two debug parameters to the driver; ca_debug and avc_comm_debug. - Added CI support that works for me in kaffeine - Started working on CI MMI support. It now supports: o Enter menu o Receiving MMI objects - Added support for 64-bit platforms - Corrected DVB-C modulations problems Signed-off-by: Henrik Kurelid <henrik@kurelid.se> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (rebased, whitespace)
2008-08-01 16:00:45 +08:00
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*/
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-26 06:17:30 +08:00
#ifndef _FIREDTV_H
#define _FIREDTV_H
DVB: add firesat driver Original code written by Christian Dolzer <c.dolzer@digital-everywhere.com> Cleaned up by Greg. Major cleanup and reorg by Manu Abraham <manu@linuxtv.org> Additions also by Ben Backx <ben@bbackx.com> Cc: Christian Dolzer <c.dolzer@digital-everywhere.com> Cc: Andreas Monitzer <andy@monitzer.com> Cc: Manu Abraham <manu@linuxtv.org> Cc: Fabio De Lorenzo <delorenzo.fabio@gmail.com> Cc: Robert Berger <robert.berger@reliableembeddedsystems.com> Signed-off-by: Ben Backx <ben@bbackx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Added missing dependency to dvb/firesat/Kconfig, Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Tweaked dvb/Makefile. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-03-07 13:30:23 +08:00
#include <linux/dvb/dmx.h>
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-26 06:17:30 +08:00
#include <linux/dvb/frontend.h>
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/spinlock_types.h>
#include <linux/types.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
#include <demux.h>
#include <dmxdev.h>
#include <dvb_demux.h>
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 20:45:00 +08:00
#include <dvb_frontend.h>
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-26 06:17:30 +08:00
#include <dvb_net.h>
#include <dvbdev.h>
firesat: update isochronous interface, add CI support I have finally managed to get the CI support for the card working. The implementation is a bare minimum to get encrypted channels to work in kaffeine. It works fine with my T/CI card. Now and then I get an AVC timeout and have to retune a channel in order to get it to work. Once the CAM seemed to hang so I needed to remove and insert it again. I.e. there are a number of glitches. The latest version contains the following changes: - Implemented the new hpsb iso interface so that data can be received from the card - Reduced some timers for demux setup which caused scanning to timeout - Added possibility to unload driver - Added support for getting C/N ratio - Added two debug parameters to the driver; ca_debug and avc_comm_debug. - Added CI support that works for me in kaffeine - Started working on CI MMI support. It now supports: o Enter menu o Receiving MMI objects - Added support for 64-bit platforms - Corrected DVB-C modulations problems Signed-off-by: Henrik Kurelid <henrik@kurelid.se> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (rebased, whitespace)
2008-08-01 16:00:45 +08:00
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-26 06:17:30 +08:00
#include <linux/version.h>
firesat: update isochronous interface, add CI support I have finally managed to get the CI support for the card working. The implementation is a bare minimum to get encrypted channels to work in kaffeine. It works fine with my T/CI card. Now and then I get an AVC timeout and have to retune a channel in order to get it to work. Once the CAM seemed to hang so I needed to remove and insert it again. I.e. there are a number of glitches. The latest version contains the following changes: - Implemented the new hpsb iso interface so that data can be received from the card - Reduced some timers for demux setup which caused scanning to timeout - Added possibility to unload driver - Added support for getting C/N ratio - Added two debug parameters to the driver; ca_debug and avc_comm_debug. - Added CI support that works for me in kaffeine - Started working on CI MMI support. It now supports: o Enter menu o Receiving MMI objects - Added support for 64-bit platforms - Corrected DVB-C modulations problems Signed-off-by: Henrik Kurelid <henrik@kurelid.se> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (rebased, whitespace)
2008-08-01 16:00:45 +08:00
#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 25)
#define DVB_REGISTER_ADAPTER(x, y, z, w, v) dvb_register_adapter(x, y, z, w, v)
#else
#define DVB_REGISTER_ADAPTER(x, y, z, w, v) dvb_register_adapter(x, y, z, w)
#define DVB_DEFINE_MOD_OPT_ADAPTER_NR(x)
#endif
/*****************************************************************
* CA message command constants from en50221_app_tags.h of libdvb
*****************************************************************/
/* Resource Manager */
#define TAG_PROFILE_ENQUIRY 0x9f8010
#define TAG_PROFILE 0x9f8011
#define TAG_PROFILE_CHANGE 0x9f8012
/* Application Info */
#define TAG_APP_INFO_ENQUIRY 0x9f8020
#define TAG_APP_INFO 0x9f8021
#define TAG_ENTER_MENU 0x9f8022
/* CA Support */
#define TAG_CA_INFO_ENQUIRY 0x9f8030
#define TAG_CA_INFO 0x9f8031
#define TAG_CA_PMT 0x9f8032
#define TAG_CA_PMT_REPLY 0x9f8033
/* Host Control */
#define TAG_TUNE 0x9f8400
#define TAG_REPLACE 0x9f8401
#define TAG_CLEAR_REPLACE 0x9f8402
#define TAG_ASK_RELEASE 0x9f8403
/* Date and Time */
#define TAG_DATE_TIME_ENQUIRY 0x9f8440
#define TAG_DATE_TIME 0x9f8441
/* Man Machine Interface (MMI) */
#define TAG_CLOSE_MMI 0x9f8800
#define TAG_DISPLAY_CONTROL 0x9f8801
#define TAG_DISPLAY_REPLY 0x9f8802
#define TAG_TEXT_LAST 0x9f8803
#define TAG_TEXT_MORE 0x9f8804
#define TAG_KEYPAD_CONTROL 0x9f8805
#define TAG_KEYPRESS 0x9f8806
#define TAG_ENQUIRY 0x9f8807
#define TAG_ANSWER 0x9f8808
#define TAG_MENU_LAST 0x9f8809
#define TAG_MENU_MORE 0x9f880a
#define TAG_MENU_ANSWER 0x9f880b
#define TAG_LIST_LAST 0x9f880c
#define TAG_LIST_MORE 0x9f880d
#define TAG_SUBTITLE_SEGMENT_LAST 0x9f880e
#define TAG_SUBTITLE_SEGMENT_MORE 0x9f880f
#define TAG_DISPLAY_MESSAGE 0x9f8810
#define TAG_SCENE_END_MARK 0x9f8811
#define TAG_SCENE_DONE 0x9f8812
#define TAG_SCENE_CONTROL 0x9f8813
#define TAG_SUBTITLE_DOWNLOAD_LAST 0x9f8814
#define TAG_SUBTITLE_DOWNLOAD_MORE 0x9f8815
#define TAG_FLUSH_DOWNLOAD 0x9f8816
#define TAG_DOWNLOAD_REPLY 0x9f8817
/* Low Speed Communications */
#define TAG_COMMS_COMMAND 0x9f8c00
#define TAG_CONNECTION_DESCRIPTOR 0x9f8c01
#define TAG_COMMS_REPLY 0x9f8c02
#define TAG_COMMS_SEND_LAST 0x9f8c03
#define TAG_COMMS_SEND_MORE 0x9f8c04
#define TAG_COMMS_RECV_LAST 0x9f8c05
#define TAG_COMMS_RECV_MORE 0x9f8c06
/* Authentication */
#define TAG_AUTH_REQ 0x9f8200
#define TAG_AUTH_RESP 0x9f8201
/* Teletext */
#define TAG_TELETEXT_EBU 0x9f9000
/* Smartcard */
#define TAG_SMARTCARD_COMMAND 0x9f8e00
#define TAG_SMARTCARD_REPLY 0x9f8e01
#define TAG_SMARTCARD_SEND 0x9f8e02
#define TAG_SMARTCARD_RCV 0x9f8e03
/* EPG */
#define TAG_EPG_ENQUIRY 0x9f8f00
#define TAG_EPG_REPLY 0x9f8f01
DVB: add firesat driver Original code written by Christian Dolzer <c.dolzer@digital-everywhere.com> Cleaned up by Greg. Major cleanup and reorg by Manu Abraham <manu@linuxtv.org> Additions also by Ben Backx <ben@bbackx.com> Cc: Christian Dolzer <c.dolzer@digital-everywhere.com> Cc: Andreas Monitzer <andy@monitzer.com> Cc: Manu Abraham <manu@linuxtv.org> Cc: Fabio De Lorenzo <delorenzo.fabio@gmail.com> Cc: Robert Berger <robert.berger@reliableembeddedsystems.com> Signed-off-by: Ben Backx <ben@bbackx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Added missing dependency to dvb/firesat/Kconfig, Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Tweaked dvb/Makefile. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-03-07 13:30:23 +08:00
enum model_type {
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-26 06:17:30 +08:00
FireSAT_UNKNOWN = 0,
FireSAT_DVB_S = 1,
FireSAT_DVB_C = 2,
FireSAT_DVB_T = 3,
FireSAT_DVB_S2 = 4,
DVB: add firesat driver Original code written by Christian Dolzer <c.dolzer@digital-everywhere.com> Cleaned up by Greg. Major cleanup and reorg by Manu Abraham <manu@linuxtv.org> Additions also by Ben Backx <ben@bbackx.com> Cc: Christian Dolzer <c.dolzer@digital-everywhere.com> Cc: Andreas Monitzer <andy@monitzer.com> Cc: Manu Abraham <manu@linuxtv.org> Cc: Fabio De Lorenzo <delorenzo.fabio@gmail.com> Cc: Robert Berger <robert.berger@reliableembeddedsystems.com> Signed-off-by: Ben Backx <ben@bbackx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Added missing dependency to dvb/firesat/Kconfig, Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Tweaked dvb/Makefile. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-03-07 13:30:23 +08:00
};
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 20:45:00 +08:00
struct input_dev;
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-26 06:17:30 +08:00
struct hpsb_iso;
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 20:45:00 +08:00
struct unit_directory;
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-26 06:17:30 +08:00
DVB: add firesat driver Original code written by Christian Dolzer <c.dolzer@digital-everywhere.com> Cleaned up by Greg. Major cleanup and reorg by Manu Abraham <manu@linuxtv.org> Additions also by Ben Backx <ben@bbackx.com> Cc: Christian Dolzer <c.dolzer@digital-everywhere.com> Cc: Andreas Monitzer <andy@monitzer.com> Cc: Manu Abraham <manu@linuxtv.org> Cc: Fabio De Lorenzo <delorenzo.fabio@gmail.com> Cc: Robert Berger <robert.berger@reliableembeddedsystems.com> Signed-off-by: Ben Backx <ben@bbackx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Added missing dependency to dvb/firesat/Kconfig, Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Tweaked dvb/Makefile. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-03-07 13:30:23 +08:00
struct firesat {
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 20:45:00 +08:00
struct dvb_adapter adapter;
struct dmxdev dmxdev;
struct dvb_demux demux;
struct dmx_frontend frontend;
struct dvb_net dvbnet;
struct dvb_frontend fe;
struct dvb_device *cadev;
int ca_last_command;
int ca_time_interval;
struct mutex avc_mutex;
wait_queue_head_t avc_wait;
bool avc_reply_received;
struct work_struct remote_ctrl_work;
struct input_dev *remote_ctrl_dev;
DVB: add firesat driver Original code written by Christian Dolzer <c.dolzer@digital-everywhere.com> Cleaned up by Greg. Major cleanup and reorg by Manu Abraham <manu@linuxtv.org> Additions also by Ben Backx <ben@bbackx.com> Cc: Christian Dolzer <c.dolzer@digital-everywhere.com> Cc: Andreas Monitzer <andy@monitzer.com> Cc: Manu Abraham <manu@linuxtv.org> Cc: Fabio De Lorenzo <delorenzo.fabio@gmail.com> Cc: Robert Berger <robert.berger@reliableembeddedsystems.com> Signed-off-by: Ben Backx <ben@bbackx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Added missing dependency to dvb/firesat/Kconfig, Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Tweaked dvb/Makefile. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-03-07 13:30:23 +08:00
struct firesat_channel {
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 20:45:00 +08:00
bool active;
DVB: add firesat driver Original code written by Christian Dolzer <c.dolzer@digital-everywhere.com> Cleaned up by Greg. Major cleanup and reorg by Manu Abraham <manu@linuxtv.org> Additions also by Ben Backx <ben@bbackx.com> Cc: Christian Dolzer <c.dolzer@digital-everywhere.com> Cc: Andreas Monitzer <andy@monitzer.com> Cc: Manu Abraham <manu@linuxtv.org> Cc: Fabio De Lorenzo <delorenzo.fabio@gmail.com> Cc: Robert Berger <robert.berger@reliableembeddedsystems.com> Signed-off-by: Ben Backx <ben@bbackx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Added missing dependency to dvb/firesat/Kconfig, Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Tweaked dvb/Makefile. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-03-07 13:30:23 +08:00
int pid;
} channel[16];
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 20:45:00 +08:00
struct mutex demux_mutex;
DVB: add firesat driver Original code written by Christian Dolzer <c.dolzer@digital-everywhere.com> Cleaned up by Greg. Major cleanup and reorg by Manu Abraham <manu@linuxtv.org> Additions also by Ben Backx <ben@bbackx.com> Cc: Christian Dolzer <c.dolzer@digital-everywhere.com> Cc: Andreas Monitzer <andy@monitzer.com> Cc: Manu Abraham <manu@linuxtv.org> Cc: Fabio De Lorenzo <delorenzo.fabio@gmail.com> Cc: Robert Berger <robert.berger@reliableembeddedsystems.com> Signed-off-by: Ben Backx <ben@bbackx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Added missing dependency to dvb/firesat/Kconfig, Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Tweaked dvb/Makefile. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-03-07 13:30:23 +08:00
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 20:45:00 +08:00
struct unit_directory *ud;
DVB: add firesat driver Original code written by Christian Dolzer <c.dolzer@digital-everywhere.com> Cleaned up by Greg. Major cleanup and reorg by Manu Abraham <manu@linuxtv.org> Additions also by Ben Backx <ben@bbackx.com> Cc: Christian Dolzer <c.dolzer@digital-everywhere.com> Cc: Andreas Monitzer <andy@monitzer.com> Cc: Manu Abraham <manu@linuxtv.org> Cc: Fabio De Lorenzo <delorenzo.fabio@gmail.com> Cc: Robert Berger <robert.berger@reliableembeddedsystems.com> Signed-off-by: Ben Backx <ben@bbackx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Added missing dependency to dvb/firesat/Kconfig, Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Tweaked dvb/Makefile. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-03-07 13:30:23 +08:00
firesat: update isochronous interface, add CI support I have finally managed to get the CI support for the card working. The implementation is a bare minimum to get encrypted channels to work in kaffeine. It works fine with my T/CI card. Now and then I get an AVC timeout and have to retune a channel in order to get it to work. Once the CAM seemed to hang so I needed to remove and insert it again. I.e. there are a number of glitches. The latest version contains the following changes: - Implemented the new hpsb iso interface so that data can be received from the card - Reduced some timers for demux setup which caused scanning to timeout - Added possibility to unload driver - Added support for getting C/N ratio - Added two debug parameters to the driver; ca_debug and avc_comm_debug. - Added CI support that works for me in kaffeine - Started working on CI MMI support. It now supports: o Enter menu o Receiving MMI objects - Added support for 64-bit platforms - Corrected DVB-C modulations problems Signed-off-by: Henrik Kurelid <henrik@kurelid.se> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (rebased, whitespace)
2008-08-01 16:00:45 +08:00
enum model_type type;
char subunit;
DVB: add firesat driver Original code written by Christian Dolzer <c.dolzer@digital-everywhere.com> Cleaned up by Greg. Major cleanup and reorg by Manu Abraham <manu@linuxtv.org> Additions also by Ben Backx <ben@bbackx.com> Cc: Christian Dolzer <c.dolzer@digital-everywhere.com> Cc: Andreas Monitzer <andy@monitzer.com> Cc: Manu Abraham <manu@linuxtv.org> Cc: Fabio De Lorenzo <delorenzo.fabio@gmail.com> Cc: Robert Berger <robert.berger@reliableembeddedsystems.com> Signed-off-by: Ben Backx <ben@bbackx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Added missing dependency to dvb/firesat/Kconfig, Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Tweaked dvb/Makefile. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-03-07 13:30:23 +08:00
fe_sec_voltage_t voltage;
fe_sec_tone_mode_t tone;
int isochannel;
firesat: update isochronous interface, add CI support I have finally managed to get the CI support for the card working. The implementation is a bare minimum to get encrypted channels to work in kaffeine. It works fine with my T/CI card. Now and then I get an AVC timeout and have to retune a channel in order to get it to work. Once the CAM seemed to hang so I needed to remove and insert it again. I.e. there are a number of glitches. The latest version contains the following changes: - Implemented the new hpsb iso interface so that data can be received from the card - Reduced some timers for demux setup which caused scanning to timeout - Added possibility to unload driver - Added support for getting C/N ratio - Added two debug parameters to the driver; ca_debug and avc_comm_debug. - Added CI support that works for me in kaffeine - Started working on CI MMI support. It now supports: o Enter menu o Receiving MMI objects - Added support for 64-bit platforms - Corrected DVB-C modulations problems Signed-off-by: Henrik Kurelid <henrik@kurelid.se> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (rebased, whitespace)
2008-08-01 16:00:45 +08:00
struct hpsb_iso *iso_handle;
struct list_head list;
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 20:45:00 +08:00
/* needed by avc_api */
int resp_length;
u8 respfrm[512];
firesat: update isochronous interface, add CI support I have finally managed to get the CI support for the card working. The implementation is a bare minimum to get encrypted channels to work in kaffeine. It works fine with my T/CI card. Now and then I get an AVC timeout and have to retune a channel in order to get it to work. Once the CAM seemed to hang so I needed to remove and insert it again. I.e. there are a number of glitches. The latest version contains the following changes: - Implemented the new hpsb iso interface so that data can be received from the card - Reduced some timers for demux setup which caused scanning to timeout - Added possibility to unload driver - Added support for getting C/N ratio - Added two debug parameters to the driver; ca_debug and avc_comm_debug. - Added CI support that works for me in kaffeine - Started working on CI MMI support. It now supports: o Enter menu o Receiving MMI objects - Added support for 64-bit platforms - Corrected DVB-C modulations problems Signed-off-by: Henrik Kurelid <henrik@kurelid.se> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (rebased, whitespace)
2008-08-01 16:00:45 +08:00
};
struct firewireheader {
union {
struct {
__u8 tcode:4;
__u8 sy:4;
__u8 tag:2;
__u8 channel:6;
__u8 length_l;
__u8 length_h;
} hdr;
__u32 val;
};
};
DVB: add firesat driver Original code written by Christian Dolzer <c.dolzer@digital-everywhere.com> Cleaned up by Greg. Major cleanup and reorg by Manu Abraham <manu@linuxtv.org> Additions also by Ben Backx <ben@bbackx.com> Cc: Christian Dolzer <c.dolzer@digital-everywhere.com> Cc: Andreas Monitzer <andy@monitzer.com> Cc: Manu Abraham <manu@linuxtv.org> Cc: Fabio De Lorenzo <delorenzo.fabio@gmail.com> Cc: Robert Berger <robert.berger@reliableembeddedsystems.com> Signed-off-by: Ben Backx <ben@bbackx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Added missing dependency to dvb/firesat/Kconfig, Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Tweaked dvb/Makefile. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-03-07 13:30:23 +08:00
firesat: update isochronous interface, add CI support I have finally managed to get the CI support for the card working. The implementation is a bare minimum to get encrypted channels to work in kaffeine. It works fine with my T/CI card. Now and then I get an AVC timeout and have to retune a channel in order to get it to work. Once the CAM seemed to hang so I needed to remove and insert it again. I.e. there are a number of glitches. The latest version contains the following changes: - Implemented the new hpsb iso interface so that data can be received from the card - Reduced some timers for demux setup which caused scanning to timeout - Added possibility to unload driver - Added support for getting C/N ratio - Added two debug parameters to the driver; ca_debug and avc_comm_debug. - Added CI support that works for me in kaffeine - Started working on CI MMI support. It now supports: o Enter menu o Receiving MMI objects - Added support for 64-bit platforms - Corrected DVB-C modulations problems Signed-off-by: Henrik Kurelid <henrik@kurelid.se> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (rebased, whitespace)
2008-08-01 16:00:45 +08:00
struct CIPHeader {
union {
struct {
__u8 syncbits:2;
__u8 sid:6;
__u8 dbs;
__u8 fn:2;
__u8 qpc:3;
__u8 sph:1;
__u8 rsv:2;
__u8 dbc;
__u8 syncbits2:2;
__u8 fmt:6;
__u32 fdf:24;
} cip;
__u64 val;
};
DVB: add firesat driver Original code written by Christian Dolzer <c.dolzer@digital-everywhere.com> Cleaned up by Greg. Major cleanup and reorg by Manu Abraham <manu@linuxtv.org> Additions also by Ben Backx <ben@bbackx.com> Cc: Christian Dolzer <c.dolzer@digital-everywhere.com> Cc: Andreas Monitzer <andy@monitzer.com> Cc: Manu Abraham <manu@linuxtv.org> Cc: Fabio De Lorenzo <delorenzo.fabio@gmail.com> Cc: Robert Berger <robert.berger@reliableembeddedsystems.com> Signed-off-by: Ben Backx <ben@bbackx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Added missing dependency to dvb/firesat/Kconfig, Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Tweaked dvb/Makefile. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-03-07 13:30:23 +08:00
};
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-26 06:17:30 +08:00
extern const char *firedtv_model_names[];
DVB: add firesat driver Original code written by Christian Dolzer <c.dolzer@digital-everywhere.com> Cleaned up by Greg. Major cleanup and reorg by Manu Abraham <manu@linuxtv.org> Additions also by Ben Backx <ben@bbackx.com> Cc: Christian Dolzer <c.dolzer@digital-everywhere.com> Cc: Andreas Monitzer <andy@monitzer.com> Cc: Manu Abraham <manu@linuxtv.org> Cc: Fabio De Lorenzo <delorenzo.fabio@gmail.com> Cc: Robert Berger <robert.berger@reliableembeddedsystems.com> Signed-off-by: Ben Backx <ben@bbackx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Added missing dependency to dvb/firesat/Kconfig, Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Tweaked dvb/Makefile. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-03-07 13:30:23 +08:00
extern struct list_head firesat_list;
extern spinlock_t firesat_list_lock;
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-26 06:17:30 +08:00
struct device;
DVB: add firesat driver Original code written by Christian Dolzer <c.dolzer@digital-everywhere.com> Cleaned up by Greg. Major cleanup and reorg by Manu Abraham <manu@linuxtv.org> Additions also by Ben Backx <ben@bbackx.com> Cc: Christian Dolzer <c.dolzer@digital-everywhere.com> Cc: Andreas Monitzer <andy@monitzer.com> Cc: Manu Abraham <manu@linuxtv.org> Cc: Fabio De Lorenzo <delorenzo.fabio@gmail.com> Cc: Robert Berger <robert.berger@reliableembeddedsystems.com> Signed-off-by: Ben Backx <ben@bbackx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Added missing dependency to dvb/firesat/Kconfig, Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Tweaked dvb/Makefile. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-03-07 13:30:23 +08:00
/* firesat_dvb.c */
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-26 06:17:30 +08:00
int firesat_start_feed(struct dvb_demux_feed *dvbdmxfeed);
int firesat_stop_feed(struct dvb_demux_feed *dvbdmxfeed);
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 20:45:00 +08:00
int firesat_dvbdev_init(struct firesat *firesat, struct device *dev);
DVB: add firesat driver Original code written by Christian Dolzer <c.dolzer@digital-everywhere.com> Cleaned up by Greg. Major cleanup and reorg by Manu Abraham <manu@linuxtv.org> Additions also by Ben Backx <ben@bbackx.com> Cc: Christian Dolzer <c.dolzer@digital-everywhere.com> Cc: Andreas Monitzer <andy@monitzer.com> Cc: Manu Abraham <manu@linuxtv.org> Cc: Fabio De Lorenzo <delorenzo.fabio@gmail.com> Cc: Robert Berger <robert.berger@reliableembeddedsystems.com> Signed-off-by: Ben Backx <ben@bbackx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Added missing dependency to dvb/firesat/Kconfig, Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Tweaked dvb/Makefile. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-03-07 13:30:23 +08:00
/* firesat_fe.c */
firedtv: cleanups and minor fixes Combination of the following changes: Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: increase FCP frame length for DVB-S2 tune QSPK The last three bytes didn't go out to the wire. Effect of the fix not yet tested. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: replace mdelay by msleep These functions can sleep (and in fact sleep for the duration of a whole FCP transaction). Hence msleep is more appropriate here. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial reorganization in avc_api Reduce nesting level by factoring code out of avc_tuner_dsd() into helper functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in avc_api Use dev_err(), no CamelCase function names, adjust comment style, put #if 0 around unused code and add FIXME comments, standardize on lower-case hexadecimal constants, use ALIGN() for some frame length calculations, make a local function static... The code which writes FCP command frames and reads FCP response frames is not yet brought into canonical kernel coding style because this involves changes of typedefs (on-the-wire bitfields). Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: don't retry oPCR updates endlessly In the theoretical case that the target node wasn't handling the lock transactions as expected or there was continued interference by other initiating nodes, these functions wouldn't return for ages. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs Use macros/ inline functions/ standard byte order accessors to read and write oPCR register values (big endian bitfields, on-the-wire data). The new code may not be the ultimate optimum, but it doesn't occur in a hot path. This fixes the CMP code for big endian CPUs. So far I tested it only on a little endian CPU though. For now, include <asm/byteorder.h> instead of <linux/byteorder.h> because drivers/ieee1394/*.h also include the former. I will fix this in drivers/ieee1394 and firedtv later. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in cmp Reduce nesting level by means of early exit and goto. Remove obsolete includes, use dev_err(), no CamelCase function names... Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: trivial cleanups in firesat-ci Whitespace, variable names, comment style... Also, use dvb_generic_open() and dvb_generic_release() directly as our hooks in struct file_operations because firedtv's wrappers merely called these generic functions. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove CA debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove AV/C debug code This looks like it is not necessary to have available for endusers who cannot patch kernels for bug reporting and tests of fixes. Sun, 2 Nov 2008 13:45:00 +0100 (CET) firedtv: remove various debug code Most of this was already commented out. And that which wasn't is not relevant in normal use. Mon, 29 Sep 2008 19:22:48 +0200 (CEST) firedtv: register input device as child of a FireWire device Instead of one virtual input device which exists for the whole lifetime of the driver and receives events from all connected FireDTVs, register one input device for each firedtv device. These input devices will show up as children of the respective firedtv devices in the sysfs hierarchy. However, the implementation falls short because of a bug in userspace: Udev's path_id script gets stuck with 100% CPU utilization, maybe because of an assumption about the maximum ieee1394 device hierarchy depth. To avoid this bug, we use the fw-host device instead of the proper unit_directory device as parent of the input device. There is hope that the port to the new firewire stack won't be inhibited by this userspace bug because there are no fw-host devices there. Mon, 29 Sep 2008 19:21:52 +0200 (CEST) firedtv: fix string comparison and a few sparse warnings Sparse found a bug: while ((kv_buf + kv_len - 1) == '\0') should have been while (kv_buf[kv_len - 1] == '\0') We fix it by a better implementation without a temporary copy. Also fix sparse warnings of 0 instead of NULL and signedness mismatches. Mon, 29 Sep 2008 19:21:20 +0200 (CEST) firedtv: remove unused struct members and redefine an int as a bool. Mon, 29 Sep 2008 19:20:36 +0200 (CEST) firedtv: fix initialization of dvb_frontend.ops There was a NULL pointer reference if no dvb_frontend_info was found. Also, don't directly assign struct typed values to struct typed variables. Instead write out assignments to individual strcut members. This reduces module size by about 1 kB. Mon, 29 Sep 2008 19:19:41 +0200 (CEST) firedtv: remove unused dual subunit code from initialization No FireDTVs with more than one subunit exists, hence simplify the initialization for the special case of one subunit. The driver was able to check for more than one subunit but was broken for more than two subunits. While we are at it, add several missing cleanups after failure, and include a few dynamically allocated structures diretly into struct firesat instead of allocating them separately. Mon, 29 Sep 2008 19:19:08 +0200 (CEST) firedtv: add vendor_id and version to driver match table Now that nodemgr was enhanced to match against the root directory's vendor ID if there isn't one in the unit directory, use this to prevent firedtv to be bound to wrong devices by accident. Also add the AV/C software version ID to the match flags for completeness; specifier ID and software only make sense as a pair. Mon, 29 Sep 2008 19:18:30 +0200 (CEST) firedtv: use hpsb_node_read(), _write(), _lock() because they are simpler and treat the node generation more correctly. While we are at it, clean up and simplify surrounding code. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-11-02 20:45:00 +08:00
void firesat_frontend_init(struct firesat *firesat);
DVB: add firesat driver Original code written by Christian Dolzer <c.dolzer@digital-everywhere.com> Cleaned up by Greg. Major cleanup and reorg by Manu Abraham <manu@linuxtv.org> Additions also by Ben Backx <ben@bbackx.com> Cc: Christian Dolzer <c.dolzer@digital-everywhere.com> Cc: Andreas Monitzer <andy@monitzer.com> Cc: Manu Abraham <manu@linuxtv.org> Cc: Fabio De Lorenzo <delorenzo.fabio@gmail.com> Cc: Robert Berger <robert.berger@reliableembeddedsystems.com> Signed-off-by: Ben Backx <ben@bbackx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Added missing dependency to dvb/firesat/Kconfig, Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Tweaked dvb/Makefile. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-03-07 13:30:23 +08:00
firesat: update isochronous interface, add CI support I have finally managed to get the CI support for the card working. The implementation is a bare minimum to get encrypted channels to work in kaffeine. It works fine with my T/CI card. Now and then I get an AVC timeout and have to retune a channel in order to get it to work. Once the CAM seemed to hang so I needed to remove and insert it again. I.e. there are a number of glitches. The latest version contains the following changes: - Implemented the new hpsb iso interface so that data can be received from the card - Reduced some timers for demux setup which caused scanning to timeout - Added possibility to unload driver - Added support for getting C/N ratio - Added two debug parameters to the driver; ca_debug and avc_comm_debug. - Added CI support that works for me in kaffeine - Started working on CI MMI support. It now supports: o Enter menu o Receiving MMI objects - Added support for 64-bit platforms - Corrected DVB-C modulations problems Signed-off-by: Henrik Kurelid <henrik@kurelid.se> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (rebased, whitespace)
2008-08-01 16:00:45 +08:00
/* firesat_iso.c */
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-26 06:17:30 +08:00
int setup_iso_channel(struct firesat *firesat);
void tear_down_iso_channel(struct firesat *firesat);
DVB: add firesat driver Original code written by Christian Dolzer <c.dolzer@digital-everywhere.com> Cleaned up by Greg. Major cleanup and reorg by Manu Abraham <manu@linuxtv.org> Additions also by Ben Backx <ben@bbackx.com> Cc: Christian Dolzer <c.dolzer@digital-everywhere.com> Cc: Andreas Monitzer <andy@monitzer.com> Cc: Manu Abraham <manu@linuxtv.org> Cc: Fabio De Lorenzo <delorenzo.fabio@gmail.com> Cc: Robert Berger <robert.berger@reliableembeddedsystems.com> Signed-off-by: Ben Backx <ben@bbackx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Added missing dependency to dvb/firesat/Kconfig, Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Tweaked dvb/Makefile. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-03-07 13:30:23 +08:00
firesat: copyrights, rename to firedtv, API conversions, fix remote control input Combination of the following changes: Tue, 26 Aug 2008 00:17:30 +0200 (CEST) firedtv: fix remote control input and update the scancode-to-keycode mapping to a current model. Per default, various media key keycodes are emitted which closely match what is printed on the remote. Userland can modify the mapping by means of evdev ioctls. (Not tested.) The old scancode-to-keycode mapping is left in the driver but cannot be modified by ioctls. This preserves status quo for old remotes. Tue, 26 Aug 2008 00:11:28 +0200 (CEST) firedtv: replace tasklet by workqueue job Non-atomic context is a lot nicer to work with. Sun, 24 Aug 2008 23:30:00 +0200 (CEST) firedtv: move some code back to ieee1394 core Partially reverts "ieee1394: remove unused code" of Linux 2.6.25. Sun, 24 Aug 2008 23:29:30 +0200 (CEST) firedtv: replace semaphore by mutex firesat->avc_sem and ->demux_sem have been used exactly like a mutex. The only exception is the schedule_remotecontrol tasklet which did a down_trylock in atomic context. This is not possible with mutex_trylock; however the whole remote control related code is non-functional anyway at the moment. This should be fixed eventually, probably by turning the tasklet into a worqueue job. Convert everything else from semaphore to mutex. Also rewrite a few of the affected functions to unlock the mutex at a single exit point, instead of in several branches. Sun, 24 Aug 2008 23:28:45 +0200 (CEST) firedtv: some header cleanups Unify #ifndef/#define/#endif guards against multiple inclusion. Drop extern keyword from function declarations. Remove #include's into header files where struct declarations suffice. Remove unused ohci1394 interface and related unused ieee1394 interfaces. Add a few missing #include's and remove a few apparently obsolete ones. Sort them alphabetically. Sun, 24 Aug 2008 23:27:45 +0200 (CEST) firedtv: nicer registration message and some initialization fixes Print the correct name in dvb_register_adapter(). While we are at it, replace two switch cascades by one for loop, remove a superfluous member of struct firesat and of two unused arguments of AVCIdentifySubunit(), and fix bogus kfree's in firesat_dvbdev_init(). Tue, 26 Aug 2008 14:24:17 +0200 (CEST) firesat: rename to firedtv Suggested by Andreas Monitzer. Besides DVB-S/-S2 receivers, the driver also supports DVB-C and DVB-T receivers, hence the previous project name is too narrow now. Not yet done: Rename source directory, files, types, variables... Sun, 24 Aug 2008 23:26:23 +0200 (CEST) firesat: add missing copyright notes Reported by Andreas Monitzer and Christian Dolzer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-26 06:17:30 +08:00
#endif /* _FIREDTV_H */
Copy Permalink