kernel_optimize_test/net/wireless/core.c

864 lines
21 KiB
C
Raw Normal View History

/*
* This is the linux wireless configuration interface.
*
* Copyright 2006-2009 Johannes Berg <johannes@sipsolutions.net>
*/
#include <linux/if.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/list.h>
#include <linux/nl80211.h>
#include <linux/debugfs.h>
#include <linux/notifier.h>
#include <linux/device.h>
#include <linux/etherdevice.h>
#include <linux/rtnetlink.h>
#include <net/genetlink.h>
#include <net/cfg80211.h>
#include "nl80211.h"
#include "core.h"
#include "sysfs.h"
#include "debugfs.h"
#include "wext-compat.h"
#include "ethtool.h"
/* name for sysfs, %d is appended */
#define PHY_NAME "phy"
MODULE_AUTHOR("Johannes Berg");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("wireless configuration support");
/* RCU might be appropriate here since we usually
* only read the list, and that can happen quite
* often because we need to do it for each command */
LIST_HEAD(cfg80211_rdev_list);
int cfg80211_rdev_list_generation;
/*
cfg80211: decouple regulatory variables from cfg80211_mutex We change regulatory code to be protected by its own regulatory mutex and alleviate cfg80211_mutex to only be used to protect cfg80211_rdev_list, the registered device list. By doing this we will be able to work on regulatory core components without having to have hog up the cfg80211_mutex. An example here is we no longer need to use the cfg80211_mutex during driver specific wiphy_apply_custom_regulatory(). We also no longer need it for the the country IE regulatory hint; by doing so we end up curing this new lockdep warning: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.31-rc4-wl #12 ------------------------------------------------------- phy1/1709 is trying to acquire lock: (cfg80211_mutex){+.+.+.}, at: [<ffffffffa00af852>] regulatory_hint_11d+0x32/0x3f0 [cfg80211] but task is already holding lock: (&ifmgd->mtx){+.+.+.}, at: [<ffffffffa0144228>] ieee80211_sta_work+0x108/0x10f0 [mac80211] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&ifmgd->mtx){+.+.+.}: [<ffffffff810857b6>] __lock_acquire+0xd76/0x12b0 [<ffffffff81085dd3>] lock_acquire+0xe3/0x120 [<ffffffff814eeae4>] mutex_lock_nested+0x44/0x350 [<ffffffffa0141bb8>] ieee80211_mgd_auth+0x108/0x1f0 [mac80211] [<ffffffffa0148563>] ieee80211_auth+0x13/0x20 [mac80211] [<ffffffffa00bc3a1>] __cfg80211_mlme_auth+0x1b1/0x2a0 [cfg80211] [<ffffffffa00bc516>] cfg80211_mlme_auth+0x86/0xc0 [cfg80211] [<ffffffffa00b368d>] nl80211_authenticate+0x21d/0x230 [cfg80211] [<ffffffff81416ba6>] genl_rcv_msg+0x1b6/0x1f0 [<ffffffff81415c39>] netlink_rcv_skb+0x89/0xb0 [<ffffffff814169d9>] genl_rcv+0x29/0x40 [<ffffffff8141591d>] netlink_unicast+0x29d/0x2b0 [<ffffffff81416514>] netlink_sendmsg+0x214/0x300 [<ffffffff813e4407>] sock_sendmsg+0x107/0x130 [<ffffffff813e45b9>] sys_sendmsg+0x189/0x320 [<ffffffff81011f82>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff -> #2 (&wdev->mtx){+.+.+.}: [<ffffffff810857b6>] __lock_acquire+0xd76/0x12b0 [<ffffffff81085dd3>] lock_acquire+0xe3/0x120 [<ffffffff814eeae4>] mutex_lock_nested+0x44/0x350 [<ffffffffa00ab304>] cfg80211_netdev_notifier_call+0x1a4/0x390 [cfg80211] [<ffffffff814f3dff>] notifier_call_chain+0x3f/0x80 [<ffffffff81075a91>] raw_notifier_call_chain+0x11/0x20 [<ffffffff813f665a>] dev_open+0x10a/0x120 [<ffffffff813f59bd>] dev_change_flags+0x9d/0x1e0 [<ffffffff8144eb6e>] devinet_ioctl+0x6fe/0x760 [<ffffffff81450204>] inet_ioctl+0x94/0xc0 [<ffffffff813e25fa>] sock_ioctl+0x6a/0x290 [<ffffffff8111e911>] vfs_ioctl+0x31/0xa0 [<ffffffff8111ea9a>] do_vfs_ioctl+0x8a/0x5c0 [<ffffffff8111f069>] sys_ioctl+0x99/0xa0 [<ffffffff81011f82>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff -> #1 (&rdev->mtx){+.+.+.}: [<ffffffff810857b6>] __lock_acquire+0xd76/0x12b0 [<ffffffff81085dd3>] lock_acquire+0xe3/0x120 [<ffffffff814eeae4>] mutex_lock_nested+0x44/0x350 [<ffffffffa00ac4d0>] cfg80211_get_dev_from_ifindex+0x60/0x90 [cfg80211] [<ffffffffa00b21ff>] get_rdev_dev_by_info_ifindex+0x6f/0xa0 [cfg80211] [<ffffffffa00b51eb>] nl80211_set_interface+0x3b/0x260 [cfg80211] [<ffffffff81416ba6>] genl_rcv_msg+0x1b6/0x1f0 [<ffffffff81415c39>] netlink_rcv_skb+0x89/0xb0 [<ffffffff814169d9>] genl_rcv+0x29/0x40 [<ffffffff8141591d>] netlink_unicast+0x29d/0x2b0 [<ffffffff81416514>] netlink_sendmsg+0x214/0x300 [<ffffffff813e4407>] sock_sendmsg+0x107/0x130 [<ffffffff813e45b9>] sys_sendmsg+0x189/0x320 [<ffffffff81011f82>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff other info that might help us debug this: 3 locks held by phy1/1709: #0: ((wiphy_name(local->hw.wiphy))){+.+.+.}, at: [<ffffffff8106b45d>] worker_thread+0x19d/0x340 #1: (&ifmgd->work){+.+.+.}, at: [<ffffffff8106b45d>] worker_thread+0x19d/0x340 #2: (&ifmgd->mtx){+.+.+.}, at: [<ffffffffa0144228>] ieee80211_sta_work+0x108/0x10f0 [mac80211] Reported-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-31 08:38:08 +08:00
* This is used to protect the cfg80211_rdev_list
*/
DEFINE_MUTEX(cfg80211_mutex);
/* for debugfs */
static struct dentry *ieee80211_debugfs_dir;
/* requires cfg80211_mutex to be held! */
struct cfg80211_registered_device *cfg80211_rdev_by_wiphy_idx(int wiphy_idx)
{
struct cfg80211_registered_device *result = NULL, *rdev;
if (!wiphy_idx_valid(wiphy_idx))
return NULL;
assert_cfg80211_lock();
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
if (rdev->wiphy_idx == wiphy_idx) {
result = rdev;
break;
}
}
return result;
}
int get_wiphy_idx(struct wiphy *wiphy)
{
struct cfg80211_registered_device *rdev;
if (!wiphy)
return WIPHY_IDX_STALE;
rdev = wiphy_to_dev(wiphy);
return rdev->wiphy_idx;
}
/* requires cfg80211_rdev_mutex to be held! */
struct wiphy *wiphy_idx_to_wiphy(int wiphy_idx)
{
struct cfg80211_registered_device *rdev;
if (!wiphy_idx_valid(wiphy_idx))
return NULL;
assert_cfg80211_lock();
rdev = cfg80211_rdev_by_wiphy_idx(wiphy_idx);
if (!rdev)
return NULL;
return &rdev->wiphy;
}
/* requires cfg80211_mutex to be held! */
struct cfg80211_registered_device *
__cfg80211_rdev_from_info(struct genl_info *info)
{
int ifindex;
struct cfg80211_registered_device *bywiphyidx = NULL, *byifidx = NULL;
struct net_device *dev;
int err = -EINVAL;
assert_cfg80211_lock();
if (info->attrs[NL80211_ATTR_WIPHY]) {
bywiphyidx = cfg80211_rdev_by_wiphy_idx(
nla_get_u32(info->attrs[NL80211_ATTR_WIPHY]));
err = -ENODEV;
}
if (info->attrs[NL80211_ATTR_IFINDEX]) {
ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]);
dev = dev_get_by_index(genl_info_net(info), ifindex);
if (dev) {
if (dev->ieee80211_ptr)
byifidx =
wiphy_to_dev(dev->ieee80211_ptr->wiphy);
dev_put(dev);
}
err = -ENODEV;
}
if (bywiphyidx && byifidx) {
if (bywiphyidx != byifidx)
return ERR_PTR(-EINVAL);
else
return bywiphyidx; /* == byifidx */
}
if (bywiphyidx)
return bywiphyidx;
if (byifidx)
return byifidx;
return ERR_PTR(err);
}
struct cfg80211_registered_device *
cfg80211_get_dev_from_info(struct genl_info *info)
{
struct cfg80211_registered_device *rdev;
mutex_lock(&cfg80211_mutex);
rdev = __cfg80211_rdev_from_info(info);
/* if it is not an error we grab the lock on
* it to assure it won't be going away while
* we operate on it */
if (!IS_ERR(rdev))
mutex_lock(&rdev->mtx);
mutex_unlock(&cfg80211_mutex);
return rdev;
}
struct cfg80211_registered_device *
cfg80211_get_dev_from_ifindex(struct net *net, int ifindex)
{
struct cfg80211_registered_device *rdev = ERR_PTR(-ENODEV);
struct net_device *dev;
mutex_lock(&cfg80211_mutex);
dev = dev_get_by_index(net, ifindex);
if (!dev)
goto out;
if (dev->ieee80211_ptr) {
rdev = wiphy_to_dev(dev->ieee80211_ptr->wiphy);
mutex_lock(&rdev->mtx);
} else
rdev = ERR_PTR(-ENODEV);
dev_put(dev);
out:
mutex_unlock(&cfg80211_mutex);
return rdev;
}
/* requires cfg80211_mutex to be held */
int cfg80211_dev_rename(struct cfg80211_registered_device *rdev,
char *newname)
{
struct cfg80211_registered_device *rdev2;
int wiphy_idx, taken = -1, result, digits;
assert_cfg80211_lock();
/* prohibit calling the thing phy%d when %d is not its number */
sscanf(newname, PHY_NAME "%d%n", &wiphy_idx, &taken);
if (taken == strlen(newname) && wiphy_idx != rdev->wiphy_idx) {
/* count number of places needed to print wiphy_idx */
digits = 1;
while (wiphy_idx /= 10)
digits++;
/*
* deny the name if it is phy<idx> where <idx> is printed
* without leading zeroes. taken == strlen(newname) here
*/
if (taken == strlen(PHY_NAME) + digits)
return -EINVAL;
}
/* Ignore nop renames */
if (strcmp(newname, dev_name(&rdev->wiphy.dev)) == 0)
return 0;
/* Ensure another device does not already have this name. */
list_for_each_entry(rdev2, &cfg80211_rdev_list, list)
if (strcmp(newname, dev_name(&rdev2->wiphy.dev)) == 0)
return -EINVAL;
result = device_rename(&rdev->wiphy.dev, newname);
if (result)
return result;
if (rdev->wiphy.debugfsdir &&
!debugfs_rename(rdev->wiphy.debugfsdir->d_parent,
rdev->wiphy.debugfsdir,
rdev->wiphy.debugfsdir->d_parent,
newname))
printk(KERN_ERR "cfg80211: failed to rename debugfs dir to %s!\n",
newname);
nl80211_notify_dev_rename(rdev);
return 0;
}
int cfg80211_switch_netns(struct cfg80211_registered_device *rdev,
struct net *net)
{
struct wireless_dev *wdev;
int err = 0;
if (!rdev->wiphy.netnsok)
return -EOPNOTSUPP;
list_for_each_entry(wdev, &rdev->netdev_list, list) {
wdev->netdev->features &= ~NETIF_F_NETNS_LOCAL;
err = dev_change_net_namespace(wdev->netdev, net, "wlan%d");
if (err)
break;
wdev->netdev->features |= NETIF_F_NETNS_LOCAL;
}
if (err) {
/* failed -- clean up to old netns */
net = wiphy_net(&rdev->wiphy);
list_for_each_entry_continue_reverse(wdev, &rdev->netdev_list,
list) {
wdev->netdev->features &= ~NETIF_F_NETNS_LOCAL;
err = dev_change_net_namespace(wdev->netdev, net,
"wlan%d");
WARN_ON(err);
wdev->netdev->features |= NETIF_F_NETNS_LOCAL;
}
}
wiphy_net_set(&rdev->wiphy, net);
return err;
}
static void cfg80211_rfkill_poll(struct rfkill *rfkill, void *data)
{
struct cfg80211_registered_device *rdev = data;
rdev->ops->rfkill_poll(&rdev->wiphy);
}
static int cfg80211_rfkill_set_block(void *data, bool blocked)
{
struct cfg80211_registered_device *rdev = data;
struct wireless_dev *wdev;
if (!blocked)
return 0;
rtnl_lock();
mutex_lock(&rdev->devlist_mtx);
list_for_each_entry(wdev, &rdev->netdev_list, list)
dev_close(wdev->netdev);
mutex_unlock(&rdev->devlist_mtx);
rtnl_unlock();
return 0;
}
static void cfg80211_rfkill_sync_work(struct work_struct *work)
{
struct cfg80211_registered_device *rdev;
rdev = container_of(work, struct cfg80211_registered_device, rfkill_sync);
cfg80211_rfkill_set_block(rdev, rfkill_blocked(rdev->rfkill));
}
static void cfg80211_event_work(struct work_struct *work)
{
struct cfg80211_registered_device *rdev;
rdev = container_of(work, struct cfg80211_registered_device,
event_work);
rtnl_lock();
cfg80211_lock_rdev(rdev);
cfg80211_process_rdev_events(rdev);
cfg80211_unlock_rdev(rdev);
rtnl_unlock();
}
/* exported functions */
struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv)
{
static int wiphy_counter;
struct cfg80211_registered_device *rdev;
int alloc_size;
WARN_ON(ops->add_key && (!ops->del_key || !ops->set_default_key));
WARN_ON(ops->auth && (!ops->assoc || !ops->deauth || !ops->disassoc));
WARN_ON(ops->connect && !ops->disconnect);
WARN_ON(ops->join_ibss && !ops->leave_ibss);
WARN_ON(ops->add_virtual_intf && !ops->del_virtual_intf);
WARN_ON(ops->add_station && !ops->del_station);
WARN_ON(ops->add_mpath && !ops->del_mpath);
alloc_size = sizeof(*rdev) + sizeof_priv;
rdev = kzalloc(alloc_size, GFP_KERNEL);
if (!rdev)
return NULL;
rdev->ops = ops;
mutex_lock(&cfg80211_mutex);
rdev->wiphy_idx = wiphy_counter++;
if (unlikely(!wiphy_idx_valid(rdev->wiphy_idx))) {
wiphy_counter--;
mutex_unlock(&cfg80211_mutex);
/* ugh, wrapped! */
kfree(rdev);
return NULL;
}
mutex_unlock(&cfg80211_mutex);
/* give it a proper name */
dev_set_name(&rdev->wiphy.dev, PHY_NAME "%d", rdev->wiphy_idx);
mutex_init(&rdev->mtx);
mutex_init(&rdev->devlist_mtx);
INIT_LIST_HEAD(&rdev->netdev_list);
spin_lock_init(&rdev->bss_lock);
INIT_LIST_HEAD(&rdev->bss_list);
INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done);
#ifdef CONFIG_CFG80211_WEXT
rdev->wiphy.wext = &cfg80211_wext_handler;
#endif
device_initialize(&rdev->wiphy.dev);
rdev->wiphy.dev.class = &ieee80211_class;
rdev->wiphy.dev.platform_data = rdev;
rdev->wiphy.ps_default = CONFIG_CFG80211_DEFAULT_PS_VALUE;
wiphy_net_set(&rdev->wiphy, &init_net);
rdev->rfkill_ops.set_block = cfg80211_rfkill_set_block;
rdev->rfkill = rfkill_alloc(dev_name(&rdev->wiphy.dev),
&rdev->wiphy.dev, RFKILL_TYPE_WLAN,
&rdev->rfkill_ops, rdev);
if (!rdev->rfkill) {
kfree(rdev);
return NULL;
}
INIT_WORK(&rdev->rfkill_sync, cfg80211_rfkill_sync_work);
INIT_WORK(&rdev->conn_work, cfg80211_conn_work);
INIT_WORK(&rdev->event_work, cfg80211_event_work);
init_waitqueue_head(&rdev->dev_wait);
/*
* Initialize wiphy parameters to IEEE 802.11 MIB default values.
* Fragmentation and RTS threshold are disabled by default with the
* special -1 value.
*/
rdev->wiphy.retry_short = 7;
rdev->wiphy.retry_long = 4;
rdev->wiphy.frag_threshold = (u32) -1;
rdev->wiphy.rts_threshold = (u32) -1;
return &rdev->wiphy;
}
EXPORT_SYMBOL(wiphy_new);
int wiphy_register(struct wiphy *wiphy)
{
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
int res;
enum ieee80211_band band;
struct ieee80211_supported_band *sband;
bool have_band = false;
int i;
u16 ifmodes = wiphy->interface_modes;
/* sanity check ifmodes */
WARN_ON(!ifmodes);
ifmodes &= ((1 << __NL80211_IFTYPE_AFTER_LAST) - 1) & ~1;
if (WARN_ON(ifmodes != wiphy->interface_modes))
wiphy->interface_modes = ifmodes;
/* sanity check supported bands/channels */
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
sband = wiphy->bands[band];
if (!sband)
continue;
sband->band = band;
if (WARN_ON(!sband->n_channels || !sband->n_bitrates))
return -EINVAL;
/*
* Since we use a u32 for rate bitmaps in
* ieee80211_get_response_rate, we cannot
* have more than 32 legacy rates.
*/
if (WARN_ON(sband->n_bitrates > 32))
return -EINVAL;
for (i = 0; i < sband->n_channels; i++) {
sband->channels[i].orig_flags =
sband->channels[i].flags;
sband->channels[i].orig_mag =
sband->channels[i].max_antenna_gain;
sband->channels[i].orig_mpwr =
sband->channels[i].max_power;
sband->channels[i].band = band;
}
have_band = true;
}
if (!have_band) {
WARN_ON(1);
return -EINVAL;
}
/* check and set up bitrates */
ieee80211_set_bitrate_flags(wiphy);
res = device_add(&rdev->wiphy.dev);
if (res)
return res;
res = rfkill_register(rdev->rfkill);
if (res)
goto out_rm_dev;
mutex_lock(&cfg80211_mutex);
/* set up regulatory info */
wiphy_update_regulatory(wiphy, NL80211_REGDOM_SET_BY_CORE);
list_add(&rdev->list, &cfg80211_rdev_list);
cfg80211_rdev_list_generation++;
mutex_unlock(&cfg80211_mutex);
/* add to debugfs */
rdev->wiphy.debugfsdir =
debugfs_create_dir(wiphy_name(&rdev->wiphy),
ieee80211_debugfs_dir);
if (IS_ERR(rdev->wiphy.debugfsdir))
rdev->wiphy.debugfsdir = NULL;
if (wiphy->custom_regulatory) {
struct regulatory_request request;
request.wiphy_idx = get_wiphy_idx(wiphy);
request.initiator = NL80211_REGDOM_SET_BY_DRIVER;
request.alpha2[0] = '9';
request.alpha2[1] = '9';
nl80211_send_reg_change_event(&request);
}
cfg80211_debugfs_rdev_add(rdev);
return 0;
out_rm_dev:
device_del(&rdev->wiphy.dev);
return res;
}
EXPORT_SYMBOL(wiphy_register);
void wiphy_rfkill_start_polling(struct wiphy *wiphy)
{
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
if (!rdev->ops->rfkill_poll)
return;
rdev->rfkill_ops.poll = cfg80211_rfkill_poll;
rfkill_resume_polling(rdev->rfkill);
}
EXPORT_SYMBOL(wiphy_rfkill_start_polling);
void wiphy_rfkill_stop_polling(struct wiphy *wiphy)
{
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
rfkill_pause_polling(rdev->rfkill);
}
EXPORT_SYMBOL(wiphy_rfkill_stop_polling);
void wiphy_unregister(struct wiphy *wiphy)
{
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
rfkill_unregister(rdev->rfkill);
/* protect the device list */
mutex_lock(&cfg80211_mutex);
wait_event(rdev->dev_wait, ({
int __count;
mutex_lock(&rdev->devlist_mtx);
__count = rdev->opencount;
mutex_unlock(&rdev->devlist_mtx);
__count == 0;}));
mutex_lock(&rdev->devlist_mtx);
BUG_ON(!list_empty(&rdev->netdev_list));
mutex_unlock(&rdev->devlist_mtx);
/*
* First remove the hardware from everywhere, this makes
* it impossible to find from userspace.
*/
cfg80211_debugfs_rdev_del(rdev);
list_del(&rdev->list);
/*
* Try to grab rdev->mtx. If a command is still in progress,
* hopefully the driver will refuse it since it's tearing
* down the device already. We wait for this command to complete
* before unlinking the item from the list.
* Note: as codified by the BUG_ON above we cannot get here if
* a virtual interface is still present. Hence, we can only get
* to lock contention here if userspace issues a command that
* identified the hardware by wiphy index.
*/
cfg80211_lock_rdev(rdev);
/* nothing */
cfg80211_unlock_rdev(rdev);
/* If this device got a regulatory hint tell core its
* free to listen now to a new shiny device regulatory hint */
reg_device_remove(wiphy);
cfg80211_rdev_list_generation++;
device_del(&rdev->wiphy.dev);
debugfs_remove(rdev->wiphy.debugfsdir);
mutex_unlock(&cfg80211_mutex);
flush_work(&rdev->scan_done_wk);
cancel_work_sync(&rdev->conn_work);
flush_work(&rdev->event_work);
}
EXPORT_SYMBOL(wiphy_unregister);
void cfg80211_dev_free(struct cfg80211_registered_device *rdev)
{
struct cfg80211_internal_bss *scan, *tmp;
rfkill_destroy(rdev->rfkill);
mutex_destroy(&rdev->mtx);
mutex_destroy(&rdev->devlist_mtx);
list_for_each_entry_safe(scan, tmp, &rdev->bss_list, list)
cfg80211_put_bss(&scan->pub);
kfree(rdev);
}
void wiphy_free(struct wiphy *wiphy)
{
put_device(&wiphy->dev);
}
EXPORT_SYMBOL(wiphy_free);
void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked)
{
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
if (rfkill_set_hw_state(rdev->rfkill, blocked))
schedule_work(&rdev->rfkill_sync);
}
EXPORT_SYMBOL(wiphy_rfkill_set_hw_state);
static void wdev_cleanup_work(struct work_struct *work)
{
struct wireless_dev *wdev;
struct cfg80211_registered_device *rdev;
wdev = container_of(work, struct wireless_dev, cleanup_work);
rdev = wiphy_to_dev(wdev->wiphy);
cfg80211_lock_rdev(rdev);
if (WARN_ON(rdev->scan_req && rdev->scan_req->dev == wdev->netdev)) {
rdev->scan_req->aborted = true;
___cfg80211_scan_done(rdev, true);
}
cfg80211_unlock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
rdev->opencount--;
mutex_unlock(&rdev->devlist_mtx);
wake_up(&rdev->dev_wait);
dev_put(wdev->netdev);
}
static struct device_type wiphy_type = {
.name = "wlan",
};
static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
unsigned long state,
void *ndev)
{
struct net_device *dev = ndev;
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev;
if (!wdev)
return NOTIFY_DONE;
rdev = wiphy_to_dev(wdev->wiphy);
WARN_ON(wdev->iftype == NL80211_IFTYPE_UNSPECIFIED);
switch (state) {
case NETDEV_POST_INIT:
SET_NETDEV_DEVTYPE(dev, &wiphy_type);
break;
case NETDEV_REGISTER:
/*
* NB: cannot take rdev->mtx here because this may be
* called within code protected by it when interfaces
* are added with nl80211.
*/
mutex_init(&wdev->mtx);
INIT_WORK(&wdev->cleanup_work, wdev_cleanup_work);
INIT_LIST_HEAD(&wdev->event_list);
spin_lock_init(&wdev->event_lock);
mutex_lock(&rdev->devlist_mtx);
list_add(&wdev->list, &rdev->netdev_list);
rdev->devlist_generation++;
/* can only change netns with wiphy */
dev->features |= NETIF_F_NETNS_LOCAL;
if (sysfs_create_link(&dev->dev.kobj, &rdev->wiphy.dev.kobj,
"phy80211")) {
printk(KERN_ERR "wireless: failed to add phy80211 "
"symlink to netdev!\n");
}
wdev->netdev = dev;
wdev->sme_state = CFG80211_SME_IDLE;
mutex_unlock(&rdev->devlist_mtx);
#ifdef CONFIG_CFG80211_WEXT
wdev->wext.default_key = -1;
wdev->wext.default_mgmt_key = -1;
wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
wdev->wext.ps = wdev->wiphy->ps_default;
wdev->wext.ps_timeout = 100;
if (rdev->ops->set_power_mgmt)
if (rdev->ops->set_power_mgmt(wdev->wiphy, dev,
wdev->wext.ps,
wdev->wext.ps_timeout)) {
/* assume this means it's off */
wdev->wext.ps = false;
}
#endif
if (!dev->ethtool_ops)
dev->ethtool_ops = &cfg80211_ethtool_ops;
break;
case NETDEV_GOING_DOWN:
switch (wdev->iftype) {
case NL80211_IFTYPE_ADHOC:
cfg80211_leave_ibss(rdev, dev, true);
break;
case NL80211_IFTYPE_STATION:
wdev_lock(wdev);
#ifdef CONFIG_CFG80211_WEXT
kfree(wdev->wext.ie);
wdev->wext.ie = NULL;
wdev->wext.ie_len = 0;
wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
#endif
__cfg80211_disconnect(rdev, dev,
WLAN_REASON_DEAUTH_LEAVING, true);
cfg80211_mlme_down(rdev, dev);
wdev_unlock(wdev);
break;
default:
break;
}
break;
case NETDEV_DOWN:
dev_hold(dev);
schedule_work(&wdev->cleanup_work);
break;
case NETDEV_UP:
/*
* If we have a really quick DOWN/UP succession we may
* have this work still pending ... cancel it and see
* if it was pending, in which case we need to account
* for some of the work it would have done.
*/
if (cancel_work_sync(&wdev->cleanup_work)) {
mutex_lock(&rdev->devlist_mtx);
rdev->opencount--;
mutex_unlock(&rdev->devlist_mtx);
dev_put(dev);
}
#ifdef CONFIG_CFG80211_WEXT
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
wdev_lock(wdev);
switch (wdev->iftype) {
case NL80211_IFTYPE_ADHOC:
cfg80211_ibss_wext_join(rdev, wdev);
break;
case NL80211_IFTYPE_STATION:
cfg80211_mgd_wext_connect(rdev, wdev);
break;
default:
break;
}
wdev_unlock(wdev);
rdev->opencount++;
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
#endif
break;
case NETDEV_UNREGISTER:
/*
* NB: cannot take rdev->mtx here because this may be
* called within code protected by it when interfaces
* are removed with nl80211.
*/
mutex_lock(&rdev->devlist_mtx);
/*
* It is possible to get NETDEV_UNREGISTER
* multiple times. To detect that, check
* that the interface is still on the list
* of registered interfaces, and only then
* remove and clean it up.
*/
if (!list_empty(&wdev->list)) {
sysfs_remove_link(&dev->dev.kobj, "phy80211");
list_del_init(&wdev->list);
rdev->devlist_generation++;
#ifdef CONFIG_CFG80211_WEXT
kfree(wdev->wext.keys);
#endif
}
mutex_unlock(&rdev->devlist_mtx);
break;
case NETDEV_PRE_UP:
if (!(wdev->wiphy->interface_modes & BIT(wdev->iftype)))
return notifier_from_errno(-EOPNOTSUPP);
if (rfkill_blocked(rdev->rfkill))
return notifier_from_errno(-ERFKILL);
break;
}
return NOTIFY_DONE;
}
static struct notifier_block cfg80211_netdev_notifier = {
.notifier_call = cfg80211_netdev_notifier_call,
};
static void __net_exit cfg80211_pernet_exit(struct net *net)
{
struct cfg80211_registered_device *rdev;
rtnl_lock();
mutex_lock(&cfg80211_mutex);
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
if (net_eq(wiphy_net(&rdev->wiphy), net))
WARN_ON(cfg80211_switch_netns(rdev, &init_net));
}
mutex_unlock(&cfg80211_mutex);
rtnl_unlock();
}
static struct pernet_operations cfg80211_pernet_ops = {
.exit = cfg80211_pernet_exit,
};
static int __init cfg80211_init(void)
{
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
int err;
err = register_pernet_device(&cfg80211_pernet_ops);
if (err)
goto out_fail_pernet;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
err = wiphy_sysfs_init();
if (err)
goto out_fail_sysfs;
err = register_netdevice_notifier(&cfg80211_netdev_notifier);
if (err)
goto out_fail_notifier;
err = nl80211_init();
if (err)
goto out_fail_nl80211;
ieee80211_debugfs_dir = debugfs_create_dir("ieee80211", NULL);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
err = regulatory_init();
if (err)
goto out_fail_reg;
return 0;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
out_fail_reg:
debugfs_remove(ieee80211_debugfs_dir);
out_fail_nl80211:
unregister_netdevice_notifier(&cfg80211_netdev_notifier);
out_fail_notifier:
wiphy_sysfs_exit();
out_fail_sysfs:
unregister_pernet_device(&cfg80211_pernet_ops);
out_fail_pernet:
return err;
}
subsys_initcall(cfg80211_init);
static void cfg80211_exit(void)
{
debugfs_remove(ieee80211_debugfs_dir);
nl80211_exit();
unregister_netdevice_notifier(&cfg80211_netdev_notifier);
wiphy_sysfs_exit();
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
regulatory_exit();
unregister_pernet_device(&cfg80211_pernet_ops);
}
module_exit(cfg80211_exit);