V4L/DVB: Break Remote Controller keymaps into modules
The original Remote Controller approach were very messy: a big file,
that were part of ir-common kernel module, containing 64 different
RC keymap tables, used by the V4L/DVB drivers.
Better to break each RC keymap table into a separate module,
registering them into rc core on a process similar to the fs/nls tables.
As an userspace program is now in charge of loading those tables,
adds an option to allow the complete removal of those tables from
kernelspace.
Yet, on embedded devices like Set Top Boxes and TV sets, maybe the
only available input device is the IR. So, we should keep allowing
the usage of in-kernel tables, but a latter patch should change
the default to 'n', after giving some time for distros to add
the v4l-utils with the ir-keytable program, to allow the table
load via userspace.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-04-02 14:05:46 +08:00
|
|
|
/* budget-ci-old.h - Keytable for budget_ci_old Remote Controller
|
|
|
|
|
*
|
|
|
|
|
* keymap imported from ir-keymaps.c
|
|
|
|
|
*
|
|
|
|
|
* Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
|
* (at your option) any later version.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <media/rc-map.h>
|
|
|
|
|
|
|
|
|
|
/* From reading the following remotes:
|
|
|
|
|
* Zenith Universal 7 / TV Mode 807 / VCR Mode 837
|
|
|
|
|
* Hauppauge (from NOVA-CI-s box product)
|
|
|
|
|
* This is a "middle of the road" approach, differences are noted
|
|
|
|
|
*/
|
|
|
|
|
|
[media] rc: Name RC keymap tables as rc_map_table
Remote keytables had different names all over the place. Part of the fault
is due to a bad naming when rc subsystem was created, but there were lots
of old names that were still here.
Use a common standard for everything.
Patch generated by this script:
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_scancode,rc_map_table,g <$i >a && mv a $i; done
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_codes_,rc_map_,g <$i >a && mv a $i; done
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_key_map,rc_map_table,g <$i >a && mv a $i; done
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_map_table_size,rc_map_size,g <$i >a && mv a $i; done
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-11-18 02:46:09 +08:00
|
|
|
static struct rc_map_table budget_ci_old[] = {
|
V4L/DVB: Break Remote Controller keymaps into modules
The original Remote Controller approach were very messy: a big file,
that were part of ir-common kernel module, containing 64 different
RC keymap tables, used by the V4L/DVB drivers.
Better to break each RC keymap table into a separate module,
registering them into rc core on a process similar to the fs/nls tables.
As an userspace program is now in charge of loading those tables,
adds an option to allow the complete removal of those tables from
kernelspace.
Yet, on embedded devices like Set Top Boxes and TV sets, maybe the
only available input device is the IR. So, we should keep allowing
the usage of in-kernel tables, but a latter patch should change
the default to 'n', after giving some time for distros to add
the v4l-utils with the ir-keytable program, to allow the table
load via userspace.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-04-02 14:05:46 +08:00
|
|
|
{ 0x00, KEY_0 },
|
|
|
|
|
{ 0x01, KEY_1 },
|
|
|
|
|
{ 0x02, KEY_2 },
|
|
|
|
|
{ 0x03, KEY_3 },
|
|
|
|
|
{ 0x04, KEY_4 },
|
|
|
|
|
{ 0x05, KEY_5 },
|
|
|
|
|
{ 0x06, KEY_6 },
|
|
|
|
|
{ 0x07, KEY_7 },
|
|
|
|
|
{ 0x08, KEY_8 },
|
|
|
|
|
{ 0x09, KEY_9 },
|
|
|
|
|
{ 0x0a, KEY_ENTER },
|
|
|
|
|
{ 0x0b, KEY_RED },
|
|
|
|
|
{ 0x0c, KEY_POWER }, /* RADIO on Hauppauge */
|
|
|
|
|
{ 0x0d, KEY_MUTE },
|
|
|
|
|
{ 0x0f, KEY_A }, /* TV on Hauppauge */
|
|
|
|
|
{ 0x10, KEY_VOLUMEUP },
|
|
|
|
|
{ 0x11, KEY_VOLUMEDOWN },
|
|
|
|
|
{ 0x14, KEY_B },
|
|
|
|
|
{ 0x1c, KEY_UP },
|
|
|
|
|
{ 0x1d, KEY_DOWN },
|
|
|
|
|
{ 0x1e, KEY_OPTION }, /* RESERVED on Hauppauge */
|
|
|
|
|
{ 0x1f, KEY_BREAK },
|
|
|
|
|
{ 0x20, KEY_CHANNELUP },
|
|
|
|
|
{ 0x21, KEY_CHANNELDOWN },
|
|
|
|
|
{ 0x22, KEY_PREVIOUS }, /* Prev Ch on Zenith, SOURCE on Hauppauge */
|
|
|
|
|
{ 0x24, KEY_RESTART },
|
|
|
|
|
{ 0x25, KEY_OK },
|
|
|
|
|
{ 0x26, KEY_CYCLEWINDOWS }, /* MINIMIZE on Hauppauge */
|
|
|
|
|
{ 0x28, KEY_ENTER }, /* VCR mode on Zenith */
|
|
|
|
|
{ 0x29, KEY_PAUSE },
|
|
|
|
|
{ 0x2b, KEY_RIGHT },
|
|
|
|
|
{ 0x2c, KEY_LEFT },
|
|
|
|
|
{ 0x2e, KEY_MENU }, /* FULL SCREEN on Hauppauge */
|
|
|
|
|
{ 0x30, KEY_SLOW },
|
|
|
|
|
{ 0x31, KEY_PREVIOUS }, /* VCR mode on Zenith */
|
|
|
|
|
{ 0x32, KEY_REWIND },
|
|
|
|
|
{ 0x34, KEY_FASTFORWARD },
|
|
|
|
|
{ 0x35, KEY_PLAY },
|
|
|
|
|
{ 0x36, KEY_STOP },
|
|
|
|
|
{ 0x37, KEY_RECORD },
|
|
|
|
|
{ 0x38, KEY_TUNER }, /* TV/VCR on Zenith */
|
|
|
|
|
{ 0x3a, KEY_C },
|
|
|
|
|
{ 0x3c, KEY_EXIT },
|
|
|
|
|
{ 0x3d, KEY_POWER2 },
|
|
|
|
|
{ 0x3e, KEY_TUNER },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static struct rc_keymap budget_ci_old_map = {
|
|
|
|
|
.map = {
|
|
|
|
|
.scan = budget_ci_old,
|
|
|
|
|
.size = ARRAY_SIZE(budget_ci_old),
|
2010-11-18 01:20:52 +08:00
|
|
|
.rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */
|
V4L/DVB: Break Remote Controller keymaps into modules
The original Remote Controller approach were very messy: a big file,
that were part of ir-common kernel module, containing 64 different
RC keymap tables, used by the V4L/DVB drivers.
Better to break each RC keymap table into a separate module,
registering them into rc core on a process similar to the fs/nls tables.
As an userspace program is now in charge of loading those tables,
adds an option to allow the complete removal of those tables from
kernelspace.
Yet, on embedded devices like Set Top Boxes and TV sets, maybe the
only available input device is the IR. So, we should keep allowing
the usage of in-kernel tables, but a latter patch should change
the default to 'n', after giving some time for distros to add
the v4l-utils with the ir-keytable program, to allow the table
load via userspace.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-04-02 14:05:46 +08:00
|
|
|
.name = RC_MAP_BUDGET_CI_OLD,
|
|
|
|
|
}
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static int __init init_rc_map_budget_ci_old(void)
|
|
|
|
|
{
|
|
|
|
|
return ir_register_map(&budget_ci_old_map);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void __exit exit_rc_map_budget_ci_old(void)
|
|
|
|
|
{
|
|
|
|
|
ir_unregister_map(&budget_ci_old_map);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
module_init(init_rc_map_budget_ci_old)
|
|
|
|
|
module_exit(exit_rc_map_budget_ci_old)
|
|
|
|
|
|
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
|