kernel_optimize_test/net/hsr/hsr_netlink.h

/* SPDX-License-Identifier: GPL-2.0 */
/* Copyright 2011-2014 Autronica Fire and Security AS
 *
 * Author(s):
 *	2011-2014 Arvid Brodin, arvid.brodin@alten.se
 *
 * include file for HSR and PRP.
 */

#ifndef __HSR_NETLINK_H
#define __HSR_NETLINK_H

#include <linux/if_ether.h>
#include <linux/module.h>
#include <uapi/linux/hsr_netlink.h>

struct hsr_priv;
struct hsr_port;

int __init hsr_netlink_init(void);
void __exit hsr_netlink_exit(void);

void hsr_nl_ringerror(struct hsr_priv *hsr, unsigned char addr[ETH_ALEN],
		      struct hsr_port *port);
void hsr_nl_nodedown(struct hsr_priv *hsr, unsigned char addr[ETH_ALEN]);
void hsr_nl_framedrop(int dropcount, int dev_idx);
void hsr_nl_linkdown(int dev_idx);

#endif /* __HSR_NETLINK_H */
net: hsr: convert to SPDX identifier Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2019-04-06 01:31:34 +08:00			`/* SPDX-License-Identifier: GPL-2.0 */`
net/hsr: Better variable names and update of contact info. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net> 2014-07-05 05:34:38 +08:00			`/* Copyright 2011-2014 Autronica Fire and Security AS`
net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0) High-availability Seamless Redundancy ("HSR") provides instant failover redundancy for Ethernet networks. It requires a special network topology where all nodes are connected in a ring (each node having two physical network interfaces). It is suited for applications that demand high availability and very short reaction time. HSR acts on the Ethernet layer, using a registered Ethernet protocol type to send special HSR frames in both directions over the ring. The driver creates virtual network interfaces that can be used just like any ordinary Linux network interface, for IP/TCP/UDP traffic etc. All nodes in the network ring must be HSR capable. This code is a "best effort" to comply with the HSR standard as described in IEC 62439-3:2010 (HSRv0). Signed-off-by: Arvid Brodin <arvid.brodin@xdin.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2013-10-31 04:10:47 +08:00			`*`
			`* Author(s):`
net/hsr: Better variable names and update of contact info. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net> 2014-07-05 05:34:38 +08:00			`* 2011-2014 Arvid Brodin, arvid.brodin@alten.se`
hsr: enhance netlink socket interface to support PRP Parallel Redundancy Protocol (PRP) is another redundancy protocol introduced by IEC 63439 standard. It is similar to HSR in many aspects:- - Use a pair of Ethernet interfaces to created the PRP device - Use a 6 byte redundancy protocol part (RCT, Redundancy Check Trailer) similar to HSR Tag. - Has Link Redundancy Entity (LRE) that works with RCT to implement redundancy. Key difference is that the protocol unit is a trailer instead of a prefix as in HSR. That makes it inter-operable with tradition network components such as bridges/switches which treat it as pad bytes, whereas HSR nodes requires some kind of translators (Called redbox) to talk to regular network devices. This features allows regular linux box to be converted to a DAN-P box. DAN-P stands for Dual Attached Node - PRP similar to DAN-H (Dual Attached Node - HSR). Add a comment at the header/source code to explicitly state that the driver files also handles PRP protocol as well. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2020-07-22 22:40:16 +08:00			`*`
			`* include file for HSR and PRP.`
net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0) High-availability Seamless Redundancy ("HSR") provides instant failover redundancy for Ethernet networks. It requires a special network topology where all nodes are connected in a ring (each node having two physical network interfaces). It is suited for applications that demand high availability and very short reaction time. HSR acts on the Ethernet layer, using a registered Ethernet protocol type to send special HSR frames in both directions over the ring. The driver creates virtual network interfaces that can be used just like any ordinary Linux network interface, for IP/TCP/UDP traffic etc. All nodes in the network ring must be HSR capable. This code is a "best effort" to comply with the HSR standard as described in IEC 62439-3:2010 (HSRv0). Signed-off-by: Arvid Brodin <arvid.brodin@xdin.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2013-10-31 04:10:47 +08:00			`*/`

			`#ifndef __HSR_NETLINK_H`
			`#define __HSR_NETLINK_H`

			`#include <linux/if_ether.h>`
			`#include <linux/module.h>`
			`#include <uapi/linux/hsr_netlink.h>`

			`struct hsr_priv;`
net/hsr: Use list_head (and rcu) instead of array for slave devices. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net> 2014-07-05 05:38:05 +08:00			`struct hsr_port;`
net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0) High-availability Seamless Redundancy ("HSR") provides instant failover redundancy for Ethernet networks. It requires a special network topology where all nodes are connected in a ring (each node having two physical network interfaces). It is suited for applications that demand high availability and very short reaction time. HSR acts on the Ethernet layer, using a registered Ethernet protocol type to send special HSR frames in both directions over the ring. The driver creates virtual network interfaces that can be used just like any ordinary Linux network interface, for IP/TCP/UDP traffic etc. All nodes in the network ring must be HSR capable. This code is a "best effort" to comply with the HSR standard as described in IEC 62439-3:2010 (HSRv0). Signed-off-by: Arvid Brodin <arvid.brodin@xdin.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2013-10-31 04:10:47 +08:00
			`int __init hsr_netlink_init(void);`
			`void __exit hsr_netlink_exit(void);`

net/hsr: Better variable names and update of contact info. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net> 2014-07-05 05:34:38 +08:00			`void hsr_nl_ringerror(struct hsr_priv *hsr, unsigned char addr[ETH_ALEN],`
net/hsr: Use list_head (and rcu) instead of array for slave devices. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net> 2014-07-05 05:38:05 +08:00			`struct hsr_port *port);`
net/hsr: Better variable names and update of contact info. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net> 2014-07-05 05:34:38 +08:00			`void hsr_nl_nodedown(struct hsr_priv *hsr, unsigned char addr[ETH_ALEN]);`
net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0) High-availability Seamless Redundancy ("HSR") provides instant failover redundancy for Ethernet networks. It requires a special network topology where all nodes are connected in a ring (each node having two physical network interfaces). It is suited for applications that demand high availability and very short reaction time. HSR acts on the Ethernet layer, using a registered Ethernet protocol type to send special HSR frames in both directions over the ring. The driver creates virtual network interfaces that can be used just like any ordinary Linux network interface, for IP/TCP/UDP traffic etc. All nodes in the network ring must be HSR capable. This code is a "best effort" to comply with the HSR standard as described in IEC 62439-3:2010 (HSRv0). Signed-off-by: Arvid Brodin <arvid.brodin@xdin.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2013-10-31 04:10:47 +08:00			`void hsr_nl_framedrop(int dropcount, int dev_idx);`
			`void hsr_nl_linkdown(int dev_idx);`

			`#endif /* __HSR_NETLINK_H */`