kernel_optimize_test/arch/mips/kernel/syscall.c

252 lines
5.7 KiB
C
Raw Normal View History

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1995, 1996, 1997, 2000, 2001, 05 by Ralf Baechle
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
* Copyright (C) 2001 MIPS Technologies, Inc.
*/
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/linkage.h>
Remove fs.h from mm.h Remove fs.h from mm.h. For this, 1) Uninline vma_wants_writenotify(). It's pretty huge anyway. 2) Add back fs.h or less bloated headers (err.h) to files that need it. As result, on x86_64 allyesconfig, fs.h dependencies cut down from 3929 files rebuilt down to 3444 (-12.3%). Cross-compile tested without regressions on my two usual configs and (sigh): alpha arm-mx1ads mips-bigsur powerpc-ebony alpha-allnoconfig arm-neponset mips-capcella powerpc-g5 alpha-defconfig arm-netwinder mips-cobalt powerpc-holly alpha-up arm-netx mips-db1000 powerpc-iseries arm arm-ns9xxx mips-db1100 powerpc-linkstation arm-assabet arm-omap_h2_1610 mips-db1200 powerpc-lite5200 arm-at91rm9200dk arm-onearm mips-db1500 powerpc-maple arm-at91rm9200ek arm-picotux200 mips-db1550 powerpc-mpc7448_hpc2 arm-at91sam9260ek arm-pleb mips-ddb5477 powerpc-mpc8272_ads arm-at91sam9261ek arm-pnx4008 mips-decstation powerpc-mpc8313_rdb arm-at91sam9263ek arm-pxa255-idp mips-e55 powerpc-mpc832x_mds arm-at91sam9rlek arm-realview mips-emma2rh powerpc-mpc832x_rdb arm-ateb9200 arm-realview-smp mips-excite powerpc-mpc834x_itx arm-badge4 arm-rpc mips-fulong powerpc-mpc834x_itxgp arm-carmeva arm-s3c2410 mips-ip22 powerpc-mpc834x_mds arm-cerfcube arm-shannon mips-ip27 powerpc-mpc836x_mds arm-clps7500 arm-shark mips-ip32 powerpc-mpc8540_ads arm-collie arm-simpad mips-jazz powerpc-mpc8544_ds arm-corgi arm-spitz mips-jmr3927 powerpc-mpc8560_ads arm-csb337 arm-trizeps4 mips-malta powerpc-mpc8568mds arm-csb637 arm-versatile mips-mipssim powerpc-mpc85xx_cds arm-ebsa110 i386 mips-mpc30x powerpc-mpc8641_hpcn arm-edb7211 i386-allnoconfig mips-msp71xx powerpc-mpc866_ads arm-em_x270 i386-defconfig mips-ocelot powerpc-mpc885_ads arm-ep93xx i386-up mips-pb1100 powerpc-pasemi arm-footbridge ia64 mips-pb1500 powerpc-pmac32 arm-fortunet ia64-allnoconfig mips-pb1550 powerpc-ppc64 arm-h3600 ia64-bigsur mips-pnx8550-jbs powerpc-prpmc2800 arm-h7201 ia64-defconfig mips-pnx8550-stb810 powerpc-ps3 arm-h7202 ia64-gensparse mips-qemu powerpc-pseries arm-hackkit ia64-sim mips-rbhma4200 powerpc-up arm-integrator ia64-sn2 mips-rbhma4500 s390 arm-iop13xx ia64-tiger mips-rm200 s390-allnoconfig arm-iop32x ia64-up mips-sb1250-swarm s390-defconfig arm-iop33x ia64-zx1 mips-sead s390-up arm-ixp2000 m68k mips-tb0219 sparc arm-ixp23xx m68k-amiga mips-tb0226 sparc-allnoconfig arm-ixp4xx m68k-apollo mips-tb0287 sparc-defconfig arm-jornada720 m68k-atari mips-workpad sparc-up arm-kafa m68k-bvme6000 mips-wrppmc sparc64 arm-kb9202 m68k-hp300 mips-yosemite sparc64-allnoconfig arm-ks8695 m68k-mac parisc sparc64-defconfig arm-lart m68k-mvme147 parisc-allnoconfig sparc64-up arm-lpd270 m68k-mvme16x parisc-defconfig um-x86_64 arm-lpd7a400 m68k-q40 parisc-up x86_64 arm-lpd7a404 m68k-sun3 powerpc x86_64-allnoconfig arm-lubbock m68k-sun3x powerpc-cell x86_64-defconfig arm-lusl7200 mips powerpc-celleb x86_64-up arm-mainstone mips-atlas powerpc-chrp32 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-30 06:36:13 +08:00
#include <linux/fs.h>
#include <linux/smp.h>
#include <linux/ptrace.h>
#include <linux/string.h>
#include <linux/syscalls.h>
#include <linux/file.h>
#include <linux/utsname.h>
#include <linux/unistd.h>
#include <linux/sem.h>
#include <linux/msg.h>
#include <linux/shm.h>
#include <linux/compiler.h>
#include <linux/ipc.h>
#include <linux/uaccess.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/elf.h>
#include <linux/sched/task_stack.h>
#include <asm/asm.h>
#include <asm/asm-eva.h>
#include <asm/branch.h>
#include <asm/cachectl.h>
#include <asm/cacheflush.h>
#include <asm/asm-offsets.h>
#include <asm/signal.h>
#include <asm/sim.h>
#include <asm/shmparam.h>
#include <asm/sync.h>
#include <asm/sysmips.h>
#include <asm/switch_to.h>
/*
* For historic reasons the pipe(2) syscall on MIPS has an unusual calling
* convention. It returns results in registers $v0 / $v1 which means there
* is no need for it to do verify the validity of a userspace pointer
* argument. Historically that used to be expensive in Linux. These days
* the performance advantage is negligible.
*/
asmlinkage int sysm_pipe(void)
{
int fd[2];
int error = do_pipe_flags(fd, 0);
if (error)
return error;
current_pt_regs()->regs[3] = fd[1];
return fd[0];
}
SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len,
unsigned long, prot, unsigned long, flags, unsigned long,
fd, off_t, offset)
{
if (offset & ~PAGE_MASK)
return -EINVAL;
return ksys_mmap_pgoff(addr, len, prot, flags, fd,
offset >> PAGE_SHIFT);
}
SYSCALL_DEFINE6(mips_mmap2, unsigned long, addr, unsigned long, len,
unsigned long, prot, unsigned long, flags, unsigned long, fd,
unsigned long, pgoff)
{
if (pgoff & (~PAGE_MASK >> 12))
return -EINVAL;
return ksys_mmap_pgoff(addr, len, prot, flags, fd,
pgoff >> (PAGE_SHIFT - 12));
}
save_static_function(sys_fork);
save_static_function(sys_clone);
save_static_function(sys_clone3);
SYSCALL_DEFINE1(set_thread_area, unsigned long, addr)
{
struct thread_info *ti = task_thread_info(current);
ti->tp_value = addr;
if (cpu_has_userlocal)
write_c0_userlocal(addr);
return 0;
}
static inline int mips_atomic_set(unsigned long addr, unsigned long new)
{
unsigned long old, tmp;
struct pt_regs *regs;
unsigned int err;
if (unlikely(addr & 3))
return -EINVAL;
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 10:57:57 +08:00
if (unlikely(!access_ok((const void __user *)addr, 4)))
return -EINVAL;
if (cpu_has_llsc && IS_ENABLED(CONFIG_WAR_R10000_LLSC)) {
__asm__ __volatile__ (
" .set push \n"
" .set arch=r4000 \n"
" li %[err], 0 \n"
"1: ll %[old], (%[addr]) \n"
" move %[tmp], %[new] \n"
"2: sc %[tmp], (%[addr]) \n"
" beqzl %[tmp], 1b \n"
"3: \n"
" .insn \n"
" .section .fixup,\"ax\" \n"
"4: li %[err], %[efault] \n"
" j 3b \n"
" .previous \n"
" .section __ex_table,\"a\" \n"
" "STR(PTR)" 1b, 4b \n"
" "STR(PTR)" 2b, 4b \n"
" .previous \n"
" .set pop \n"
: [old] "=&r" (old),
[err] "=&r" (err),
[tmp] "=&r" (tmp)
: [addr] "r" (addr),
[new] "r" (new),
[efault] "i" (-EFAULT)
: "memory");
} else if (cpu_has_llsc) {
__asm__ __volatile__ (
" .set push \n"
" .set "MIPS_ISA_ARCH_LEVEL" \n"
" li %[err], 0 \n"
"1: \n"
" " __SYNC(full, loongson3_war) " \n"
user_ll("%[old]", "(%[addr])")
" move %[tmp], %[new] \n"
"2: \n"
user_sc("%[tmp]", "(%[addr])")
" beqz %[tmp], 1b \n"
"3: \n"
" .insn \n"
" .section .fixup,\"ax\" \n"
"5: li %[err], %[efault] \n"
" j 3b \n"
" .previous \n"
" .section __ex_table,\"a\" \n"
" "STR(PTR)" 1b, 5b \n"
" "STR(PTR)" 2b, 5b \n"
" .previous \n"
" .set pop \n"
: [old] "=&r" (old),
[err] "=&r" (err),
[tmp] "=&r" (tmp)
: [addr] "r" (addr),
[new] "r" (new),
[efault] "i" (-EFAULT)
: "memory");
} else {
do {
preempt_disable();
ll_bit = 1;
ll_task = current;
preempt_enable();
err = __get_user(old, (unsigned int *) addr);
err |= __put_user(new, (unsigned int *) addr);
if (err)
break;
rmb();
} while (!ll_bit);
}
if (unlikely(err))
return err;
regs = current_pt_regs();
regs->regs[2] = old;
regs->regs[7] = 0; /* No error */
/*
* Don't let your children do this ...
*/
__asm__ __volatile__(
" move $29, %0 \n"
" j syscall_exit \n"
: /* no outputs */
: "r" (regs));
/* unreached. Honestly. */
unreachable();
}
/*
* mips_atomic_set() normally returns directly via syscall_exit potentially
* clobbering static registers, so be sure to preserve them.
*/
save_static_function(sys_sysmips);
SYSCALL_DEFINE3(sysmips, long, cmd, long, arg1, long, arg2)
{
switch (cmd) {
case MIPS_ATOMIC_SET:
return mips_atomic_set(arg1, arg2);
case MIPS_FIXADE:
if (arg1 & ~3)
return -EINVAL;
if (arg1 & 1)
set_thread_flag(TIF_FIXADE);
else
clear_thread_flag(TIF_FIXADE);
if (arg1 & 2)
set_thread_flag(TIF_LOGADE);
else
clear_thread_flag(TIF_LOGADE);
return 0;
case FLUSH_CACHE:
__flush_cache_all();
return 0;
}
return -EINVAL;
}
/*
* No implemented yet ...
*/
SYSCALL_DEFINE3(cachectl, char *, addr, int, nbytes, int, op)
{
return -ENOSYS;
}
/*
* If we ever come here the user sp is bad. Zap the process right away.
* Due to the bad stack signaling wouldn't work.
*/
asmlinkage void bad_stack(void)
{
do_exit(SIGSEGV);
}