AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
489577d708
kernel_optimize_test/drivers/md/raid0.c

841 lines
22 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 47 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version you should have received a copy of the gnu general public license for example usr src linux copying if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 20 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520170858.552543146@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 01:08:12 +08:00
// SPDX-License-Identifier: GPL-2.0-or-later
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
raid0.c : Multiple Devices driver for Linux
md: remove unwanted white space from md.c My editor shows much of this is RED. Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-30 12:23:59 +08:00
Copyright (C) 1994-96 Marc ZYNGIER
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
<zyngier@ufr-info-p7.ibp.fr> or
<maz@gloups.fdn.fr>
md: remove unwanted white space from md.c My editor shows much of this is RED. Signed-off-by: NeilBrown <neilb@suse.de>
2014-09-30 12:23:59 +08:00
Copyright (C) 1999, 2000 Ingo Molnar, Red Hat
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
RAID-0 management functions.
*/
md: move lots of #include lines out of .h files and into .c This makes the includes more explicit, and is preparation for moving md_k.h to drivers/md/md.h Remove include/raid/md.h as its only remaining use was to #include other files. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 11:33:13 +08:00
#include <linux/blkdev.h>
#include <linux/seq_file.h>
md: Add module.h to all files using it implicitly A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in md dir are actually calling out for <module.h> explicitly in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-04 01:58:33 +08:00
#include <linux/module.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
md: add block tracing for bio_remapping The block tracing infrastructure (accessed with blktrace/blkparse) supports the tracing of mapping bios from one device to another. This is currently used when a bio in a partition is mapped to the whole device, when bios are mapped by dm, and for mapping in md/raid5. Other md personalities do not include this tracing yet, so add it. When a read-error is detected we redirect the request to a different device. This could justifiably be seen as a new mapping for the originial bio, or a secondary mapping for the bio that errors. This patch uses the second option. When md is used under dm-raid, the mappings are not traced as we do not have access to the block device number of the parent. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-18 10:22:04 +08:00
#include <trace/events/block.h>
md: move md_k.h from include/linux/raid/ to drivers/md/ It really is nicer to keep related code together.. Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 11:33:13 +08:00
#include "md.h"
md: move headers out of include/linux/raid/ Move the headers with the local structures for the disciplines and bitmap.h into drivers/md/ so that they are more easily grepable for hacking and not far away. md.h is left where it is for now as there are some uses from the outside. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 11:27:03 +08:00
#include "raid0.h"
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
#include "raid5.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
md/raid0: avoid RAID0 data corruption due to layout confusion. If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b1012 ("block: Introduce new bio_split()") cc: stable@vger.kernel.org (3.14+) Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-09 14:30:02 +08:00
static int default_layout = 0;
module_param(default_layout, int, 0644);
md: cleanup mddev flag clear for takeover Commit 6995f0b (md: takeover should clear unrelated bits) clear unrelated bits, but it's quite fragile. To avoid error in the future, define a macro for unsupported mddev flags for each raid type and use it to clear unsupported mddev flags. This should be less error-prone. Suggested-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-01-05 08:10:19 +08:00
#define UNSUPPORTED_MDDEV_FLAGS \
((1L << MD_HAS_JOURNAL) | \
(1L << MD_JOURNAL_CLEAN) | \
md: superblock changes for PPL Include information about PPL location and size into mdp_superblock_1 and copy it to/from rdev. Because PPL is mutually exclusive with bitmap, put it in place of 'bitmap_offset'. Add a new flag MD_FEATURE_PPL for 'feature_map', analogically to MD_FEATURE_BITMAP_OFFSET. Add MD_HAS_PPL to mddev->flags to indicate that PPL is enabled on an array. Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-09 16:59:57 +08:00
(1L << MD_FAILFAST_SUPPORTED) |\
md: Runtime support for multiple ppls Increase PPL area to 1MB and use it as circular buffer to store PPL. The entry with highest generation number is the latest one. If PPL to be written is larger then space left in a buffer, rewind the buffer to the start (don't wrap it). Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com> Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-08-16 23:13:45 +08:00
(1L << MD_HAS_PPL) | \
(1L << MD_HAS_MULTIPLE_PPLS))
md: cleanup mddev flag clear for takeover Commit 6995f0b (md: takeover should clear unrelated bits) clear unrelated bits, but it's quite fragile. To avoid error in the future, define a macro for unsupported mddev flags for each raid type and use it to clear unsupported mddev flags. This should be less error-prone. Suggested-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-01-05 08:10:19 +08:00
md: make ->congested robust against personality changes. There is currently no locking around calls to the 'congested' bdi function. If called at an awkward time while an array is being converted from one level (or personality) to another, there is a tiny chance of running code in an unreferenced module etc. So add a 'congested' function to the md_personality operations structure, and call it with appropriate locking from a central 'mddev_congested'. When the array personality is changing the array will be 'suspended' so no IO is processed. If mddev_congested detects this, it simply reports that the array is congested, which is a safe guess. As mddev_suspend calls synchronize_rcu(), mddev_congested can avoid races by included the whole call inside an rcu_read_lock() region. This require that the congested functions for all subordinate devices can be run under rcu_lock. Fortunately this is the case. Signed-off-by: NeilBrown <neilb@suse.de>
2014-12-15 09:56:56 +08:00
static int raid0_congested(struct mddev *mddev, int bits)
[PATCH] md: define backing_dev_info.congested_fn for raid0 and linear Each backing_dev needs to be able to report whether it is congested, either by modulating BDI_*_congested in ->state, or by defining a ->congested_fn. md/raid did neither of these. This patch add a congested_fn which simply checks all component devices to see if they are congested. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 16:15:53 +08:00
{
md/raid0: typedef removal: raid0_conf_t -> struct r0conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:48:59 +08:00
struct r0conf *conf = mddev->private;
md: removing typedefs: mdk_rdev_t -> struct md_rdev The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:45:26 +08:00
struct md_rdev **devlist = conf->devlist;
md: don't use mddev->raid_disks in raid0 or raid10 while array is active. In a subsequent patch we will make it possible to change mddev->raid_disks while a RAID0 or RAID10 array is active. This is part of the process of reshaping such an array. This means that we cannot use this value while processes requests (it is OK to use it during initialisation as we are locked against changes then). Both RAID0 and RAID10 have the same value stored in the private data structure, so use that value instead. Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-16 14:23:35 +08:00
int raid_disks = conf->strip_zone[0].nb_dev;
[PATCH] md: define backing_dev_info.congested_fn for raid0 and linear Each backing_dev needs to be able to report whether it is congested, either by modulating BDI_*_congested in ->state, or by defining a ->congested_fn. md/raid did neither of these. This patch add a congested_fn which simply checks all component devices to see if they are congested. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 16:15:53 +08:00
int i, ret = 0;
md: don't use mddev->raid_disks in raid0 or raid10 while array is active. In a subsequent patch we will make it possible to change mddev->raid_disks while a RAID0 or RAID10 array is active. This is part of the process of reshaping such an array. This means that we cannot use this value while processes requests (it is OK to use it during initialisation as we are locked against changes then). Both RAID0 and RAID10 have the same value stored in the private data structure, so use that value instead. Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-16 14:23:35 +08:00
for (i = 0; i < raid_disks && !ret ; i++) {
[BLOCK] Get rid of request_queue_t typedef Some of the code has been gradually transitioned to using the proper struct request_queue, but there's lots left. So do a full sweet of the kernel and get rid of this typedef and replace its uses with the proper type. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-24 15:28:11 +08:00
struct request_queue *q = bdev_get_queue(devlist[i]->bdev);
[PATCH] md: define backing_dev_info.congested_fn for raid0 and linear Each backing_dev needs to be able to report whether it is congested, either by modulating BDI_*_congested in ->state, or by defining a ->congested_fn. md/raid did neither of these. This patch add a congested_fn which simply checks all component devices to see if they are congested. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 16:15:53 +08:00
block: Use pointer to backing_dev_info from request_queue We will want to have struct backing_dev_info allocated separately from struct request_queue. As the first step add pointer to backing_dev_info to request_queue and convert all users touching it. No functional changes in this patch. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-02 22:56:50 +08:00
ret |= bdi_congested(q->backing_dev_info, bits);
[PATCH] md: define backing_dev_info.congested_fn for raid0 and linear Each backing_dev needs to be able to report whether it is congested, either by modulating BDI_*_congested in ->state, or by defining a ->congested_fn. md/raid did neither of these. This patch add a congested_fn which simply checks all component devices to see if they are congested. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 16:15:53 +08:00
}
return ret;
}
md: have raid0 report its formation Report to the user what are the raid zones Signed-off-by: raziebe@gmail.com Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 15:00:54 +08:00
/*
* inform the user of the raid configuration
*/
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:47:53 +08:00
static void dump_zones(struct mddev *mddev)
md: have raid0 report its formation Report to the user what are the raid zones Signed-off-by: raziebe@gmail.com Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 15:00:54 +08:00
{
md/raid0: convert some printks to pr_debug. When md assembles a RAID0 array it prints out lots of info which is really just for debugging, so convert that to pr_debug. It also prints out the resulting configuration which could be interesting, so keep that as 'printk' but tidy it up a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07 11:23:22 +08:00
int j, k;
md: have raid0 report its formation Report to the user what are the raid zones Signed-off-by: raziebe@gmail.com Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 15:00:54 +08:00
sector_t zone_size = 0;
sector_t zone_start = 0;
char b[BDEVNAME_SIZE];
md/raid0: typedef removal: raid0_conf_t -> struct r0conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:48:59 +08:00
struct r0conf *conf = mddev->private;
md: don't use mddev->raid_disks in raid0 or raid10 while array is active. In a subsequent patch we will make it possible to change mddev->raid_disks while a RAID0 or RAID10 array is active. This is part of the process of reshaping such an array. This means that we cannot use this value while processes requests (it is OK to use it during initialisation as we are locked against changes then). Both RAID0 and RAID10 have the same value stored in the private data structure, so use that value instead. Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-16 14:23:35 +08:00
int raid_disks = conf->strip_zone[0].nb_dev;
md/raid0: replace printk() with pr_*() This makes md/raid0 much less verbose as the messages about the array geometry are now pr_debug() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 11:16:50 +08:00
pr_debug("md: RAID0 configuration for %s - %d zone%s\n",
mdname(mddev),
conf->nr_strip_zones, conf->nr_strip_zones==1?"":"s");
md: have raid0 report its formation Report to the user what are the raid zones Signed-off-by: raziebe@gmail.com Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 15:00:54 +08:00
for (j = 0; j < conf->nr_strip_zones; j++) {
md/raid0: replace printk() with pr_*() This makes md/raid0 much less verbose as the messages about the array geometry are now pr_debug() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 11:16:50 +08:00
char line[200];
int len = 0;
md: have raid0 report its formation Report to the user what are the raid zones Signed-off-by: raziebe@gmail.com Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 15:00:54 +08:00
for (k = 0; k < conf->strip_zone[j].nb_dev; k++)
md/raid0: replace printk() with pr_*() This makes md/raid0 much less verbose as the messages about the array geometry are now pr_debug() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 11:16:50 +08:00
len += snprintf(line+len, 200-len, "%s%s", k?"/":"",
bdevname(conf->devlist[j*raid_disks
+ k]->bdev, b));
pr_debug("md: zone%d=[%s]\n", j, line);
md: have raid0 report its formation Report to the user what are the raid zones Signed-off-by: raziebe@gmail.com Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 15:00:54 +08:00
zone_size = conf->strip_zone[j].zone_end - zone_start;
md/raid0: replace printk() with pr_*() This makes md/raid0 much less verbose as the messages about the array geometry are now pr_debug() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 11:16:50 +08:00
pr_debug(" zone-offset=%10lluKB, device-offset=%10lluKB, size=%10lluKB\n",
md: have raid0 report its formation Report to the user what are the raid zones Signed-off-by: raziebe@gmail.com Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 15:00:54 +08:00
(unsigned long long)zone_start>>1,
(unsigned long long)conf->strip_zone[j].dev_start>>1,
(unsigned long long)zone_size>>1);
zone_start = conf->strip_zone[j].zone_end;
}
}
md/raid0: typedef removal: raid0_conf_t -> struct r0conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:48:59 +08:00
static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
md: remove sparse waring "symbol xxx shadows an earlier one" Rename some variable and remove some duplicate definitions to avoid there warnings. None of them are actual errors. Signed-off-by: NeilBrown <neilb@suse.de>
2009-09-23 16:06:41 +08:00
int i, c, err;
md: raid0: remove ->sectors from the strip_zone structure. storing ->sectors is redundant as is can be computed from the difference z->zone_end - (z-1)->zone_end The one place where it is used, it is just as efficient to use a zone_end value instead. And removing it makes strip_zone smaller, so they array of these that is searched on every request has a better chance to say in cache. So discard the field and get the value from elsewhere. Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 14:50:35 +08:00
sector_t curr_zone_end, sectors;
md: removing typedefs: mdk_rdev_t -> struct md_rdev The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:45:26 +08:00
struct md_rdev *smallest, *rdev1, *rdev2, *rdev, **dev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct strip_zone *zone;
int cnt;
char b[BDEVNAME_SIZE];
md/raid0: convert some printks to pr_debug. When md assembles a RAID0 array it prints out lots of info which is really just for debugging, so convert that to pr_debug. It also prints out the resulting configuration which could be interesting, so keep that as 'printk' but tidy it up a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07 11:23:22 +08:00
char b2[BDEVNAME_SIZE];
md/raid0: typedef removal: raid0_conf_t -> struct r0conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:48:59 +08:00
struct r0conf *conf = kzalloc(sizeof(*conf), GFP_KERNEL);
block: fix an integer overflow in logical block size Logical block size has type unsigned short. That means that it can be at most 32768. However, there are architectures that can run with 64k pages (for example arm64) and on these architectures, it may be possible to create block devices with 64k block size. For exmaple (run this on an architecture with 64k pages): Mount will fail with this error because it tries to read the superblock using 2-sector access: device-mapper: writecache: I/O is not aligned, sector 2, size 1024, block size 65536 EXT4-fs (dm-0): unable to read superblock This patch changes the logical block size from unsigned short to unsigned int to avoid the overflow. Cc: stable@vger.kernel.org Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-15 21:35:25 +08:00
unsigned blksize = 512;
md: raid0: Allocate all buffers for the raid0 configuration in one function. Currently the raid0 configuration is allocated in raid0_run() while the buffers for the strip_zone and the dev_list arrays are allocated in create_strip_zones(). On errors, all three buffers are freed in raid0_run(). It's easier and more readable to do the allocation and cleanup within a single function. So move that code into create_strip_zones(). Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 14:47:36 +08:00
md/raid0: fix uninitialized variable bug If this function fails the callers expect that *private_conf is set to an ERR_PTR() but that isn't true for the first error path where we can't allocate "conf". It leads to some uninitialized variable bugs. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-04-14 17:31:49 +08:00
*private_conf = ERR_PTR(-ENOMEM);
md: raid0: Allocate all buffers for the raid0 configuration in one function. Currently the raid0 configuration is allocated in raid0_run() while the buffers for the strip_zone and the dev_list arrays are allocated in create_strip_zones(). On errors, all three buffers are freed in raid0_run(). It's easier and more readable to do the allocation and cleanup within a single function. So move that code into create_strip_zones(). Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 14:47:36 +08:00
if (!conf)
return -ENOMEM;
md: tidy up rdev_for_each usage. md.h has an 'rdev_for_each()' macro for iterating the rdevs in an mddev. However it uses the 'safe' version of list_for_each_entry, and so requires the extra variable, but doesn't include 'safe' in the name, which is useful documentation. Consequently some places use this safe version without needing it, and many use an explicity list_for_each entry. So: - rename rdev_for_each to rdev_for_each_safe - create a new rdev_for_each which uses the plain list_for_each_entry, - use the 'safe' version only where needed, and convert all other list_for_each_entry calls to use rdev_for_each. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 09:46:39 +08:00
rdev_for_each(rdev1, mddev) {
md/raid0: convert some printks to pr_debug. When md assembles a RAID0 array it prints out lots of info which is really just for debugging, so convert that to pr_debug. It also prints out the resulting configuration which could be interesting, so keep that as 'printk' but tidy it up a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07 11:23:22 +08:00
pr_debug("md/raid0:%s: looking at %s\n",
mdname(mddev),
bdevname(rdev1->bdev, b));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
c = 0;
md: raid0/linear: ensure device sizes are rounded to chunk size. This is currently ensured by common code, but it is more reliable to ensure it where it is needed in personality code. All the other personalities that care already round the size to the chunk_size. raid0 and linear are the only hold-outs. Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-18 06:48:55 +08:00
/* round size to chunk_size */
sectors = rdev1->sectors;
sector_div(sectors, mddev->chunk_sectors);
rdev1->sectors = sectors * mddev->chunk_sectors;
md/raid0: update queue parameter in a safer location. When a (e.g.) RAID5 array is reshaped to RAID0, the updating of queue parameters (e.g. max number of sectors per bio) is done in the wrong place. It should be part of ->run, but it is actually part of ->takeover. This means it happens before level_store() calls: blk_set_stacking_limits(&mddev->queue->limits); and so it ineffective. This can lead to errors from underlying devices. So move all the relevant settings out of create_stripe_zones() and into raid0_run(). As this can lead to a bug-on it is suitable for any -stable kernel which supports reshape to RAID0. So 2.6.35 or later. As the bug has been present for five years there is no urgency, so no need to rush into -stable. Fixes: 9af204cf720c ("md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover") Cc: stable@vger.kernel.org (v2.6.35+ - please delay until after -final release). Reported-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-03 11:11:47 +08:00
blksize = max(blksize, queue_logical_block_size(
rdev1->bdev->bd_disk->queue));
md: tidy up rdev_for_each usage. md.h has an 'rdev_for_each()' macro for iterating the rdevs in an mddev. However it uses the 'safe' version of list_for_each_entry, and so requires the extra variable, but doesn't include 'safe' in the name, which is useful documentation. Consequently some places use this safe version without needing it, and many use an explicity list_for_each entry. So: - rename rdev_for_each to rdev_for_each_safe - create a new rdev_for_each which uses the plain list_for_each_entry, - use the 'safe' version only where needed, and convert all other list_for_each_entry calls to use rdev_for_each. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 09:46:39 +08:00
rdev_for_each(rdev2, mddev) {
md/raid0: convert some printks to pr_debug. When md assembles a RAID0 array it prints out lots of info which is really just for debugging, so convert that to pr_debug. It also prints out the resulting configuration which could be interesting, so keep that as 'printk' but tidy it up a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07 11:23:22 +08:00
pr_debug("md/raid0:%s: comparing %s(%llu)"
" with %s(%llu)\n",
mdname(mddev),
bdevname(rdev1->bdev,b),
(unsigned long long)rdev1->sectors,
bdevname(rdev2->bdev,b2),
(unsigned long long)rdev2->sectors);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (rdev2 == rdev1) {
md/raid0: convert some printks to pr_debug. When md assembles a RAID0 array it prints out lots of info which is really just for debugging, so convert that to pr_debug. It also prints out the resulting configuration which could be interesting, so keep that as 'printk' but tidy it up a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07 11:23:22 +08:00
pr_debug("md/raid0:%s: END\n",
mdname(mddev));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
}
md: Represent raid device size in sectors. This patch renames the "size" field of struct mdk_rdev_s to "sectors" and changes this field to store sectors instead of blocks. All users of this field, linear.c, raid0.c and md.c, are fixed up accordingly which gets rid of many multiplications and divisions. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 11:33:13 +08:00
if (rdev2->sectors == rdev1->sectors) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Not unique, don't count it as a new
* group
*/
md/raid0: convert some printks to pr_debug. When md assembles a RAID0 array it prints out lots of info which is really just for debugging, so convert that to pr_debug. It also prints out the resulting configuration which could be interesting, so keep that as 'printk' but tidy it up a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07 11:23:22 +08:00
pr_debug("md/raid0:%s: EQUAL\n",
mdname(mddev));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
c = 1;
break;
}
md/raid0: convert some printks to pr_debug. When md assembles a RAID0 array it prints out lots of info which is really just for debugging, so convert that to pr_debug. It also prints out the resulting configuration which could be interesting, so keep that as 'printk' but tidy it up a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07 11:23:22 +08:00
pr_debug("md/raid0:%s: NOT EQUAL\n",
mdname(mddev));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
if (!c) {
md/raid0: convert some printks to pr_debug. When md assembles a RAID0 array it prints out lots of info which is really just for debugging, so convert that to pr_debug. It also prints out the resulting configuration which could be interesting, so keep that as 'printk' but tidy it up a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07 11:23:22 +08:00
pr_debug("md/raid0:%s: ==> UNIQUE\n",
mdname(mddev));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
conf->nr_strip_zones++;
md/raid0: convert some printks to pr_debug. When md assembles a RAID0 array it prints out lots of info which is really just for debugging, so convert that to pr_debug. It also prints out the resulting configuration which could be interesting, so keep that as 'printk' but tidy it up a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07 11:23:22 +08:00
pr_debug("md/raid0:%s: %d zones\n",
mdname(mddev), conf->nr_strip_zones);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
md/raid0: convert some printks to pr_debug. When md assembles a RAID0 array it prints out lots of info which is really just for debugging, so convert that to pr_debug. It also prints out the resulting configuration which could be interesting, so keep that as 'printk' but tidy it up a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07 11:23:22 +08:00
pr_debug("md/raid0:%s: FINAL %d zones\n",
mdname(mddev), conf->nr_strip_zones);
md/raid0: avoid RAID0 data corruption due to layout confusion. If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b1012 ("block: Introduce new bio_split()") cc: stable@vger.kernel.org (3.14+) Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-09 14:30:02 +08:00
if (conf->nr_strip_zones == 1) {
conf->layout = RAID0_ORIG_LAYOUT;
md: add feature flag MD_FEATURE_RAID0_LAYOUT Due to a bug introduced in Linux 3.14 we cannot determine the correctly layout for a multi-zone RAID0 array - there are two possibilities. It is possible to tell the kernel which to chose using a module parameter, but this can be clumsy to use. It would be best if the choice were recorded in the metadata. So add a feature flag for this purpose. If it is set, then the 'layout' field of the superblock is used to determine which layout to use. If this flag is not set, then mddev->layout gets set to -1, which causes the module parameter to be required. Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-09 14:52:29 +08:00
} else if (mddev->layout == RAID0_ORIG_LAYOUT ||
mddev->layout == RAID0_ALT_MULTIZONE_LAYOUT) {
conf->layout = mddev->layout;
md/raid0: avoid RAID0 data corruption due to layout confusion. If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b1012 ("block: Introduce new bio_split()") cc: stable@vger.kernel.org (3.14+) Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-09 14:30:02 +08:00
} else if (default_layout == RAID0_ORIG_LAYOUT ||
default_layout == RAID0_ALT_MULTIZONE_LAYOUT) {
conf->layout = default_layout;
} else {
pr_err("md/raid0:%s: cannot assemble multi-zone RAID0 with default_layout setting\n",
mdname(mddev));
md/raid0: fix warning message for parameter default_layout The message should match the parameter, i.e. raid0.default_layout. Fixes: c84a1372df92 ("md/raid0: avoid RAID0 data corruption due to layout confusion.") Cc: NeilBrown <neilb@suse.de> Reported-by: Ivan Topolsky <doktor.yak@gmail.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-10-15 07:58:35 +08:00
pr_err("md/raid0: please set raid0.default_layout to 1 or 2\n");
md/raid0: avoid RAID0 data corruption due to layout confusion. If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b1012 ("block: Introduce new bio_split()") cc: stable@vger.kernel.org (3.14+) Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-09 14:30:02 +08:00
err = -ENOTSUPP;
goto abort;
}
md/raid0: update queue parameter in a safer location. When a (e.g.) RAID5 array is reshaped to RAID0, the updating of queue parameters (e.g. max number of sectors per bio) is done in the wrong place. It should be part of ->run, but it is actually part of ->takeover. This means it happens before level_store() calls: blk_set_stacking_limits(&mddev->queue->limits); and so it ineffective. This can lead to errors from underlying devices. So move all the relevant settings out of create_stripe_zones() and into raid0_run(). As this can lead to a bug-on it is suitable for any -stable kernel which supports reshape to RAID0. So 2.6.35 or later. As the bug has been present for five years there is no urgency, so no need to rush into -stable. Fixes: 9af204cf720c ("md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover") Cc: stable@vger.kernel.org (v2.6.35+ - please delay until after -final release). Reported-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-03 11:11:47 +08:00
/*
* now since we have the hard sector sizes, we can make sure
* chunk size is a multiple of that sector size
*/
if ((mddev->chunk_sectors << 9) % blksize) {
md/raid0: replace printk() with pr_*() This makes md/raid0 much less verbose as the messages about the array geometry are now pr_debug() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 11:16:50 +08:00
pr_warn("md/raid0:%s: chunk_size of %d not multiple of block size %d\n",
mdname(mddev),
mddev->chunk_sectors << 9, blksize);
md/raid0: update queue parameter in a safer location. When a (e.g.) RAID5 array is reshaped to RAID0, the updating of queue parameters (e.g. max number of sectors per bio) is done in the wrong place. It should be part of ->run, but it is actually part of ->takeover. This means it happens before level_store() calls: blk_set_stacking_limits(&mddev->queue->limits); and so it ineffective. This can lead to errors from underlying devices. So move all the relevant settings out of create_stripe_zones() and into raid0_run(). As this can lead to a bug-on it is suitable for any -stable kernel which supports reshape to RAID0. So 2.6.35 or later. As the bug has been present for five years there is no urgency, so no need to rush into -stable. Fixes: 9af204cf720c ("md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover") Cc: stable@vger.kernel.org (v2.6.35+ - please delay until after -final release). Reported-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-03 11:11:47 +08:00
err = -EINVAL;
goto abort;
}
md: raid0: Allocate all buffers for the raid0 configuration in one function. Currently the raid0 configuration is allocated in raid0_run() while the buffers for the strip_zone and the dev_list arrays are allocated in create_strip_zones(). On errors, all three buffers are freed in raid0_run(). It's easier and more readable to do the allocation and cleanup within a single function. So move that code into create_strip_zones(). Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 14:47:36 +08:00
err = -ENOMEM;
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:03:40 +08:00
conf->strip_zone = kcalloc(conf->nr_strip_zones,
sizeof(struct strip_zone),
GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!conf->strip_zone)
md: raid0: Allocate all buffers for the raid0 configuration in one function. Currently the raid0 configuration is allocated in raid0_run() while the buffers for the strip_zone and the dev_list arrays are allocated in create_strip_zones(). On errors, all three buffers are freed in raid0_run(). It's easier and more readable to do the allocation and cleanup within a single function. So move that code into create_strip_zones(). Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 14:47:36 +08:00
goto abort;
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:03:40 +08:00
conf->devlist = kzalloc(array3_size(sizeof(struct md_rdev *),
conf->nr_strip_zones,
mddev->raid_disks),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
GFP_KERNEL);
if (!conf->devlist)
md: raid0: Allocate all buffers for the raid0 configuration in one function. Currently the raid0 configuration is allocated in raid0_run() while the buffers for the strip_zone and the dev_list arrays are allocated in create_strip_zones(). On errors, all three buffers are freed in raid0_run(). It's easier and more readable to do the allocation and cleanup within a single function. So move that code into create_strip_zones(). Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 14:47:36 +08:00
goto abort;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* The first zone must contain all devices, so here we check that
* there is a proper alignment of slots to devices and find them all
*/
zone = &conf->strip_zone[0];
cnt = 0;
smallest = NULL;
md: raid0: remove ->dev pointer from strip_zone structure If we treat conf->devlist more like a 2 dimensional array, we can get the devlist for a particular zone simply by indexing that array, so we don't need to store the pointers to subarrays in strip_zone. This makes strip_zone smaller and so (hopefully) searches faster. Signed-of-by: NeilBrown <neilb@suse.de>
2009-06-16 14:50:52 +08:00
dev = conf->devlist;
md: raid0: Allocate all buffers for the raid0 configuration in one function. Currently the raid0 configuration is allocated in raid0_run() while the buffers for the strip_zone and the dev_list arrays are allocated in create_strip_zones(). On errors, all three buffers are freed in raid0_run(). It's easier and more readable to do the allocation and cleanup within a single function. So move that code into create_strip_zones(). Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 14:47:36 +08:00
err = -EINVAL;
md: tidy up rdev_for_each usage. md.h has an 'rdev_for_each()' macro for iterating the rdevs in an mddev. However it uses the 'safe' version of list_for_each_entry, and so requires the extra variable, but doesn't include 'safe' in the name, which is useful documentation. Consequently some places use this safe version without needing it, and many use an explicity list_for_each entry. So: - rename rdev_for_each to rdev_for_each_safe - create a new rdev_for_each which uses the plain list_for_each_entry, - use the 'safe' version only where needed, and convert all other list_for_each_entry calls to use rdev_for_each. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 09:46:39 +08:00
rdev_for_each(rdev1, mddev) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int j = rdev1->raid_disk;
md: fix handling of array level takeover that re-arranges devices. Most array level changes leave the list of devices largely unchanged, possibly causing one at the end to become redundant. However conversions between RAID0 and RAID10 need to renumber all devices (except 0). This renumbering is currently being done in the ->run method when the new personality takes over. However this is too late as the common code in md.c might already have invalidated some of the devices if they had a ->raid_disk number that appeared to high. Moving it into the ->takeover method is too early as the array is still active at that time and wrong ->raid_disk numbers could cause confusion. So add a ->new_raid_disk field to mdk_rdev_s and use it to communicate the new raid_disk number. Now the common code knows exactly which devices need to be renumbered, and which can be invalidated, and can do it all at a convenient time when the array is suspend. It can also update some symlinks in sysfs which previously were not be updated correctly. Reported-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-15 16:36:03 +08:00
if (mddev->level == 10) {
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
/* taking over a raid10-n2 array */
j /= 2;
md: fix handling of array level takeover that re-arranges devices. Most array level changes leave the list of devices largely unchanged, possibly causing one at the end to become redundant. However conversions between RAID0 and RAID10 need to renumber all devices (except 0). This renumbering is currently being done in the ->run method when the new personality takes over. However this is too late as the common code in md.c might already have invalidated some of the devices if they had a ->raid_disk number that appeared to high. Moving it into the ->takeover method is too early as the array is still active at that time and wrong ->raid_disk numbers could cause confusion. So add a ->new_raid_disk field to mdk_rdev_s and use it to communicate the new raid_disk number. Now the common code knows exactly which devices need to be renumbered, and which can be invalidated, and can do it all at a convenient time when the array is suspend. It can also update some symlinks in sysfs which previously were not be updated correctly. Reported-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-15 16:36:03 +08:00
rdev1->new_raid_disk = j;
}
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
Add raid1->raid0 takeover support This patch introduces raid 1 to raid0 takeover operation in kernel space. Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: Neil Brown <neilb@nbeee.brown>
2011-01-31 10:47:13 +08:00
if (mddev->level == 1) {
/* taiking over a raid1 array-
* we have only one active disk
*/
j = 0;
rdev1->new_raid_disk = j;
}
md/raid0: improve error message when converting RAID4-with-spares to RAID0 Mentioning "bad disk number -1" exposes irrelevant internal detail. Just say they are inactive and must be removed. Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-21 12:50:07 +08:00
if (j < 0) {
md/raid0: replace printk() with pr_*() This makes md/raid0 much less verbose as the messages about the array geometry are now pr_debug() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 11:16:50 +08:00
pr_warn("md/raid0:%s: remove inactive devices before converting to RAID0\n",
mdname(mddev));
md/raid0: improve error message when converting RAID4-with-spares to RAID0 Mentioning "bad disk number -1" exposes irrelevant internal detail. Just say they are inactive and must be removed. Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-21 12:50:07 +08:00
goto abort;
}
if (j >= mddev->raid_disks) {
md/raid0: replace printk() with pr_*() This makes md/raid0 much less verbose as the messages about the array geometry are now pr_debug() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 11:16:50 +08:00
pr_warn("md/raid0:%s: bad disk number %d - aborting!\n",
mdname(mddev), j);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto abort;
}
md: raid0: remove ->dev pointer from strip_zone structure If we treat conf->devlist more like a 2 dimensional array, we can get the devlist for a particular zone simply by indexing that array, so we don't need to store the pointers to subarrays in strip_zone. This makes strip_zone smaller and so (hopefully) searches faster. Signed-of-by: NeilBrown <neilb@suse.de>
2009-06-16 14:50:52 +08:00
if (dev[j]) {
md/raid0: replace printk() with pr_*() This makes md/raid0 much less verbose as the messages about the array geometry are now pr_debug() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 11:16:50 +08:00
pr_warn("md/raid0:%s: multiple devices for %d - aborting!\n",
mdname(mddev), j);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto abort;
}
md: raid0: remove ->dev pointer from strip_zone structure If we treat conf->devlist more like a 2 dimensional array, we can get the devlist for a particular zone simply by indexing that array, so we don't need to store the pointers to subarrays in strip_zone. This makes strip_zone smaller and so (hopefully) searches faster. Signed-of-by: NeilBrown <neilb@suse.de>
2009-06-16 14:50:52 +08:00
dev[j] = rdev1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
md: Represent raid device size in sectors. This patch renames the "size" field of struct mdk_rdev_s to "sectors" and changes this field to store sectors instead of blocks. All users of this field, linear.c, raid0.c and md.c, are fixed up accordingly which gets rid of many multiplications and divisions. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 11:33:13 +08:00
if (!smallest || (rdev1->sectors < smallest->sectors))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
smallest = rdev1;
cnt++;
}
if (cnt != mddev->raid_disks) {
md/raid0: replace printk() with pr_*() This makes md/raid0 much less verbose as the messages about the array geometry are now pr_debug() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 11:16:50 +08:00
pr_warn("md/raid0:%s: too few disks (%d of %d) - aborting!\n",
mdname(mddev), cnt, mddev->raid_disks);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto abort;
}
zone->nb_dev = cnt;
md: raid0: remove ->sectors from the strip_zone structure. storing ->sectors is redundant as is can be computed from the difference z->zone_end - (z-1)->zone_end The one place where it is used, it is just as efficient to use a zone_end value instead. And removing it makes strip_zone smaller, so they array of these that is searched on every request has a better chance to say in cache. So discard the field and get the value from elsewhere. Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 14:50:35 +08:00
zone->zone_end = smallest->sectors * cnt;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
md: raid0: remove ->sectors from the strip_zone structure. storing ->sectors is redundant as is can be computed from the difference z->zone_end - (z-1)->zone_end The one place where it is used, it is just as efficient to use a zone_end value instead. And removing it makes strip_zone smaller, so they array of these that is searched on every request has a better chance to say in cache. So discard the field and get the value from elsewhere. Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 14:50:35 +08:00
curr_zone_end = zone->zone_end;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* now do the other zones */
for (i = 1; i < conf->nr_strip_zones; i++)
{
md: remove sparse waring "symbol xxx shadows an earlier one" Rename some variable and remove some duplicate definitions to avoid there warnings. None of them are actual errors. Signed-off-by: NeilBrown <neilb@suse.de>
2009-09-23 16:06:41 +08:00
int j;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
zone = conf->strip_zone + i;
md: raid0: remove ->dev pointer from strip_zone structure If we treat conf->devlist more like a 2 dimensional array, we can get the devlist for a particular zone simply by indexing that array, so we don't need to store the pointers to subarrays in strip_zone. This makes strip_zone smaller and so (hopefully) searches faster. Signed-of-by: NeilBrown <neilb@suse.de>
2009-06-16 14:50:52 +08:00
dev = conf->devlist + i * mddev->raid_disks;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
md/raid0: convert some printks to pr_debug. When md assembles a RAID0 array it prints out lots of info which is really just for debugging, so convert that to pr_debug. It also prints out the resulting configuration which could be interesting, so keep that as 'printk' but tidy it up a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07 11:23:22 +08:00
pr_debug("md/raid0:%s: zone %d\n", mdname(mddev), i);
md/raid0: two cleanups in create_stripe_zones. 1/ remove current_start. The same value is available in zone->dev_start and storing it separately doesn't gain anything. 2/ rename curr_zone_start to curr_zone_end as we are now more focused on the 'end' of each zone. We end up storing the same number though - the old name was a little confusing (and what does 'current' mean in this context anyway). Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 14:46:46 +08:00
zone->dev_start = smallest->sectors;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
smallest = NULL;
c = 0;
for (j=0; j<cnt; j++) {
md: raid0: remove ->dev pointer from strip_zone structure If we treat conf->devlist more like a 2 dimensional array, we can get the devlist for a particular zone simply by indexing that array, so we don't need to store the pointers to subarrays in strip_zone. This makes strip_zone smaller and so (hopefully) searches faster. Signed-of-by: NeilBrown <neilb@suse.de>
2009-06-16 14:50:52 +08:00
rdev = conf->devlist[j];
md/raid0: two cleanups in create_stripe_zones. 1/ remove current_start. The same value is available in zone->dev_start and storing it separately doesn't gain anything. 2/ rename curr_zone_start to curr_zone_end as we are now more focused on the 'end' of each zone. We end up storing the same number though - the old name was a little confusing (and what does 'current' mean in this context anyway). Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 14:46:46 +08:00
if (rdev->sectors <= zone->dev_start) {
md/raid0: convert some printks to pr_debug. When md assembles a RAID0 array it prints out lots of info which is really just for debugging, so convert that to pr_debug. It also prints out the resulting configuration which could be interesting, so keep that as 'printk' but tidy it up a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07 11:23:22 +08:00
pr_debug("md/raid0:%s: checking %s ... nope\n",
mdname(mddev),
bdevname(rdev->bdev, b));
md: Represent raid device size in sectors. This patch renames the "size" field of struct mdk_rdev_s to "sectors" and changes this field to store sectors instead of blocks. All users of this field, linear.c, raid0.c and md.c, are fixed up accordingly which gets rid of many multiplications and divisions. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 11:33:13 +08:00
continue;
}
md/raid0: convert some printks to pr_debug. When md assembles a RAID0 array it prints out lots of info which is really just for debugging, so convert that to pr_debug. It also prints out the resulting configuration which could be interesting, so keep that as 'printk' but tidy it up a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07 11:23:22 +08:00
pr_debug("md/raid0:%s: checking %s ..."
" contained as device %d\n",
mdname(mddev),
bdevname(rdev->bdev, b), c);
md: raid0: remove ->dev pointer from strip_zone structure If we treat conf->devlist more like a 2 dimensional array, we can get the devlist for a particular zone simply by indexing that array, so we don't need to store the pointers to subarrays in strip_zone. This makes strip_zone smaller and so (hopefully) searches faster. Signed-of-by: NeilBrown <neilb@suse.de>
2009-06-16 14:50:52 +08:00
dev[c] = rdev;
md: Represent raid device size in sectors. This patch renames the "size" field of struct mdk_rdev_s to "sectors" and changes this field to store sectors instead of blocks. All users of this field, linear.c, raid0.c and md.c, are fixed up accordingly which gets rid of many multiplications and divisions. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 11:33:13 +08:00
c++;
if (!smallest || rdev->sectors < smallest->sectors) {
smallest = rdev;
md/raid0: convert some printks to pr_debug. When md assembles a RAID0 array it prints out lots of info which is really just for debugging, so convert that to pr_debug. It also prints out the resulting configuration which could be interesting, so keep that as 'printk' but tidy it up a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07 11:23:22 +08:00
pr_debug("md/raid0:%s: (%llu) is smallest!.\n",
mdname(mddev),
(unsigned long long)rdev->sectors);
md: Represent raid device size in sectors. This patch renames the "size" field of struct mdk_rdev_s to "sectors" and changes this field to store sectors instead of blocks. All users of this field, linear.c, raid0.c and md.c, are fixed up accordingly which gets rid of many multiplications and divisions. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-03-31 11:33:13 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
zone->nb_dev = c;
md: raid0: remove ->sectors from the strip_zone structure. storing ->sectors is redundant as is can be computed from the difference z->zone_end - (z-1)->zone_end The one place where it is used, it is just as efficient to use a zone_end value instead. And removing it makes strip_zone smaller, so they array of these that is searched on every request has a better chance to say in cache. So discard the field and get the value from elsewhere. Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 14:50:35 +08:00
sectors = (smallest->sectors - zone->dev_start) * c;
md/raid0: convert some printks to pr_debug. When md assembles a RAID0 array it prints out lots of info which is really just for debugging, so convert that to pr_debug. It also prints out the resulting configuration which could be interesting, so keep that as 'printk' but tidy it up a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07 11:23:22 +08:00
pr_debug("md/raid0:%s: zone->nb_dev: %d, sectors: %llu\n",
mdname(mddev),
zone->nb_dev, (unsigned long long)sectors);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
md: raid0: remove ->sectors from the strip_zone structure. storing ->sectors is redundant as is can be computed from the difference z->zone_end - (z-1)->zone_end The one place where it is used, it is just as efficient to use a zone_end value instead. And removing it makes strip_zone smaller, so they array of these that is searched on every request has a better chance to say in cache. So discard the field and get the value from elsewhere. Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 14:50:35 +08:00
curr_zone_end += sectors;
md/raid0: two cleanups in create_stripe_zones. 1/ remove current_start. The same value is available in zone->dev_start and storing it separately doesn't gain anything. 2/ rename curr_zone_start to curr_zone_end as we are now more focused on the 'end' of each zone. We end up storing the same number though - the old name was a little confusing (and what does 'current' mean in this context anyway). Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 14:46:46 +08:00
zone->zone_end = curr_zone_end;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
md/raid0: convert some printks to pr_debug. When md assembles a RAID0 array it prints out lots of info which is really just for debugging, so convert that to pr_debug. It also prints out the resulting configuration which could be interesting, so keep that as 'printk' but tidy it up a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07 11:23:22 +08:00
pr_debug("md/raid0:%s: current zone start: %llu\n",
mdname(mddev),
(unsigned long long)smallest->sectors);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
md/raid0: convert some printks to pr_debug. When md assembles a RAID0 array it prints out lots of info which is really just for debugging, so convert that to pr_debug. It also prints out the resulting configuration which could be interesting, so keep that as 'printk' but tidy it up a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07 11:23:22 +08:00
pr_debug("md/raid0:%s: done.\n", mdname(mddev));
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
*private_conf = conf;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
md: raid0: Make raid0_run() return a proper error code. Currently raid0_run() always returns -ENOMEM on errors. This is incorrect as running the array might fail for other reasons, for example because not all component devices were available. This patch changes create_strip_zones() so that it returns a proper error code (either -ENOMEM or -EINVAL) rather than 1 on errors and makes raid0_run(), its single caller, return that value instead of -ENOMEM. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 14:47:21 +08:00
abort:
md: raid0: Allocate all buffers for the raid0 configuration in one function. Currently the raid0 configuration is allocated in raid0_run() while the buffers for the strip_zone and the dev_list arrays are allocated in create_strip_zones(). On errors, all three buffers are freed in raid0_run(). It's easier and more readable to do the allocation and cleanup within a single function. So move that code into create_strip_zones(). Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 14:47:36 +08:00
kfree(conf->strip_zone);
kfree(conf->devlist);
kfree(conf);
md: raid0: fix error return from create_stripe_zones. Create_stripe_zones returns an error slightly differently to raid0_run and to raid0_takeover_*. The error returned used by the second was wrong and an error would result in mddev->private being set to NULL and sooner or later a crash. So never return NULL, return ERR_PTR(err), not NULL from create_stripe_zones. This bug has been present since 2.6.35 so the fix is suitable for any kernel since then. Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-21 12:36:38 +08:00
*private_conf = ERR_PTR(err);
md: raid0: Allocate all buffers for the raid0 configuration in one function. Currently the raid0 configuration is allocated in raid0_run() while the buffers for the strip_zone and the dev_list arrays are allocated in create_strip_zones(). On errors, all three buffers are freed in raid0_run(). It's easier and more readable to do the allocation and cleanup within a single function. So move that code into create_strip_zones(). Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 14:47:36 +08:00
return err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
md: add proper merge_bvec handling to RAID0 and Linear. These personalities currently set a max request size of one page when any member device has a merge_bvec_fn because they don't bother to call that function. This causes extra works in splitting and combining requests. So make the extra effort to call the merge_bvec_fn when it exists so that we end up with larger requests out the bottom. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 09:46:39 +08:00
/* Find the zone which holds a particular offset
* Update *sectorp to be an offset in that zone
*/
static struct strip_zone *find_zone(struct r0conf *conf,
sector_t *sectorp)
{
int i;
struct strip_zone *z = conf->strip_zone;
sector_t sector = *sectorp;
for (i = 0; i < conf->nr_strip_zones; i++)
if (sector < z[i].zone_end) {
if (i)
*sectorp = sector - z[i-1].zone_end;
return z + i;
}
BUG();
}
/*
* remaps the bio to the target device. we separate two flows.
md/raid0: fix bug with chunksize not a power of 2. Since commit 20d0189b1012a37d2533a87fb451f7852f2418d1 in v3.14-rc1 RAID0 has performed incorrect calculations when the chunksize is not a power of 2. This happens because "sector_div()" modifies its first argument, but this wasn't taken into account in the patch. So restore that first arg before re-using the variable. Reported-by: Joe Landman <joe.landman@gmail.com> Reported-by: Dave Chinner <david@fromorbit.com> Fixes: 20d0189b1012a37d2533a87fb451f7852f2418d1 Cc: stable@vger.kernel.org (3.14 and later). Signed-off-by: NeilBrown <neilb@suse.de>
2015-04-10 11:19:04 +08:00
* power 2 flow and a general flow for the sake of performance
md: add proper merge_bvec handling to RAID0 and Linear. These personalities currently set a max request size of one page when any member device has a merge_bvec_fn because they don't bother to call that function. This causes extra works in splitting and combining requests. So make the extra effort to call the merge_bvec_fn when it exists so that we end up with larger requests out the bottom. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 09:46:39 +08:00
*/
static struct md_rdev *map_sector(struct mddev *mddev, struct strip_zone *zone,
sector_t sector, sector_t *sector_offset)
{
unsigned int sect_in_chunk;
sector_t chunk;
struct r0conf *conf = mddev->private;
int raid_disks = conf->strip_zone[0].nb_dev;
unsigned int chunk_sects = mddev->chunk_sectors;
if (is_power_of_2(chunk_sects)) {
int chunksect_bits = ffz(~chunk_sects);
/* find the sector offset inside the chunk */
sect_in_chunk = sector & (chunk_sects - 1);
sector >>= chunksect_bits;
/* chunk in zone */
chunk = *sector_offset;
/* quotient is the chunk in real device*/
sector_div(chunk, zone->nb_dev << chunksect_bits);
} else{
sect_in_chunk = sector_div(sector, chunk_sects);
chunk = *sector_offset;
sector_div(chunk, chunk_sects * zone->nb_dev);
}
/*
* position the bio over the real device
* real sector = chunk in device + starting of zone
* + the position in the chunk
*/
*sector_offset = (chunk * chunk_sects) + sect_in_chunk;
return conf->devlist[(zone - conf->strip_zone)*raid_disks
+ sector_div(sector, zone->nb_dev)];
}
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:47:53 +08:00
static sector_t raid0_size(struct mddev *mddev, sector_t sectors, int raid_disks)
md: add 'size' as a personality method In preparation for giving userspace control over ->array_sectors we need to be able to retrieve the 'default' size, and the 'anticipated' size when a reshape is requested. For personalities that do not reshape emit a warning if anything but the default size is requested. In the raid5 case we need to update ->previous_raid_disks to make the new 'default' size available. Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-18 09:10:40 +08:00
{
sector_t array_sectors = 0;
md: removing typedefs: mdk_rdev_t -> struct md_rdev The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:45:26 +08:00
struct md_rdev *rdev;
md: add 'size' as a personality method In preparation for giving userspace control over ->array_sectors we need to be able to retrieve the 'default' size, and the 'anticipated' size when a reshape is requested. For personalities that do not reshape emit a warning if anything but the default size is requested. In the raid5 case we need to update ->previous_raid_disks to make the new 'default' size available. Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-18 09:10:40 +08:00
WARN_ONCE(sectors || raid_disks,
"%s does not support generic reshape\n", __func__);
md: tidy up rdev_for_each usage. md.h has an 'rdev_for_each()' macro for iterating the rdevs in an mddev. However it uses the 'safe' version of list_for_each_entry, and so requires the extra variable, but doesn't include 'safe' in the name, which is useful documentation. Consequently some places use this safe version without needing it, and many use an explicity list_for_each entry. So: - rename rdev_for_each to rdev_for_each_safe - create a new rdev_for_each which uses the plain list_for_each_entry, - use the 'safe' version only where needed, and convert all other list_for_each_entry calls to use rdev_for_each. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 09:46:39 +08:00
rdev_for_each(rdev, mddev)
md: fix two bugs when attempting to resize RAID0 array. You cannot resize a RAID0 array (in terms of making the devices bigger), but the code doesn't entirely stop you. So: disable setting of the available size on each device for RAID0 and Linear devices. This must not change as doing so can change the effective layout of data. Make sure that the size that raid0_size() reports is accurate, but rounding devices sizes to chunk sizes. As the device sizes cannot change now, this isn't so important, but it is best to be safe. Without this change: mdadm --grow /dev/md0 -z max mdadm --grow /dev/md0 -Z max then read to the end of the array can cause a BUG in a RAID0 array. These bugs have been present ever since it became possible to resize any device, which is a long time. So the fix is suitable for any -stable kerenl. Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-21 11:33:17 +08:00
array_sectors += (rdev->sectors &
~(sector_t)(mddev->chunk_sectors-1));
md: add 'size' as a personality method In preparation for giving userspace control over ->array_sectors we need to be able to retrieve the 'default' size, and the 'anticipated' size when a reshape is requested. For personalities that do not reshape emit a warning if anything but the default size is requested. In the raid5 case we need to update ->previous_raid_disks to make the new 'default' size available. Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-18 09:10:40 +08:00
return array_sectors;
}
md: rename ->stop to ->free Now that the ->stop function only frees the private data, rename is accordingly. Also pass in the private pointer as an arg rather than using mddev->private. This flexibility will be useful in level_store(). Finally, don't clear ->private. It doesn't make sense to clear it seeing that isn't what we free, and it is no longer necessary to clear ->private (it was some time ago before ->to_remove was introduced). Setting ->to_remove in ->free() is a bit of a wart, but not a big problem at the moment. Signed-off-by: NeilBrown <neilb@suse.de>
2014-12-15 09:56:58 +08:00
static void raid0_free(struct mddev *mddev, void *priv);
md/raid0: If md_integrity_register() fails, raid0_run() must free the mem. Signed-off-by: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-02 07:48:37 +08:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:47:53 +08:00
static int raid0_run(struct mddev *mddev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
md/raid0: typedef removal: raid0_conf_t -> struct r0conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:48:59 +08:00
struct r0conf *conf;
md: raid0: Make raid0_run() return a proper error code. Currently raid0_run() always returns -ENOMEM on errors. This is incorrect as running the array might fail for other reasons, for example because not all component devices were available. This patch changes create_strip_zones() so that it returns a proper error code (either -ENOMEM or -EINVAL) rather than 1 on errors and makes raid0_run(), its single caller, return that value instead of -ENOMEM. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 14:47:21 +08:00
int ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
md: Make mddev->chunk_size sector-based. This patch renames the chunk_size field to chunk_sectors with the implied change of semantics. Since is_power_of_2(chunk_size) = is_power_of_2(chunk_sectors << 9) = is_power_of_2(chunk_sectors) these bits don't need an adjustment for the shift. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-18 06:45:01 +08:00
if (mddev->chunk_sectors == 0) {
md/raid0: replace printk() with pr_*() This makes md/raid0 much less verbose as the messages about the array geometry are now pr_debug() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 11:16:50 +08:00
pr_warn("md/raid0:%s: chunk size must be set.\n", mdname(mddev));
[PATCH] md: remove personality numbering from md md supports multiple different RAID level, each being implemented by a 'personality' (which is often in a separate module). These personalities have fairly artificial 'numbers'. The numbers are use to: 1- provide an index into an array where the various personalities are recorded 2- identify the module (via an alias) which implements are particular personality. Neither of these uses really justify the existence of personality numbers. The array can be replaced by a linked list which is searched (array lookup only happens very rarely). Module identification can be done using an alias based on level rather than 'personality' number. The current 'raid5' modules support two level (4 and 5) but only one personality. This slight awkwardness (which was handled in the mapping from level to personality) can be better handled by allowing raid5 to register 2 personalities. With this change in place, the core md module does not need to have an exhaustive list of all possible personalities, so other personalities can be added independently. This patch also moves the check for chunksize being non-zero into the ->run routines for the personalities that need it, rather than having it in core-md. This has a side effect of allowing 'faulty' and 'linear' not to have a chunk-size set. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:20:36 +08:00
return -EINVAL;
}
md: Move check for bitmap presence to personality code. If the superblock of a component device indicates the presence of a bitmap but the corresponding raid personality does not support bitmaps (raid0, linear, multipath, faulty), then something is seriously wrong and we'd better refuse to run such an array. Currently, this check is performed while the superblocks are examined, i.e. before entering personality code. Therefore the generic md layer must know which raid levels support bitmaps and which do not. This patch avoids this layer violation without adding identical code to various personalities. This is accomplished by introducing a new public function to md.c, md_check_no_bitmap(), which replaces the hard-coded checks in the superblock loading functions. A call to md_check_no_bitmap() is added to the ->run method of each personality which does not support bitmaps and assembly is aborted if at least one component device contains a bitmap. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-18 06:49:23 +08:00
if (md_check_no_bitmap(mddev))
return -EINVAL;
md raid0: access mddev->queue (request queue member) conditionally because it is not set when accessed from dm-raid The patch makes 3 references to mddev->queue in the raid0 personality conditional in order to allow for it to be accessed from dm-raid. Mandatory, because md instances underneath dm-raid don't manage a request queue of their own which'd lead to oopses without the patch. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Tested-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-14 02:48:01 +08:00
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
/* if private is not null, we are here after takeover */
if (mddev->private == NULL) {
ret = create_strip_zones(mddev, &conf);
if (ret < 0)
return ret;
mddev->private = conf;
}
conf = mddev->private;
md/raid0: update queue parameter in a safer location. When a (e.g.) RAID5 array is reshaped to RAID0, the updating of queue parameters (e.g. max number of sectors per bio) is done in the wrong place. It should be part of ->run, but it is actually part of ->takeover. This means it happens before level_store() calls: blk_set_stacking_limits(&mddev->queue->limits); and so it ineffective. This can lead to errors from underlying devices. So move all the relevant settings out of create_stripe_zones() and into raid0_run(). As this can lead to a bug-on it is suitable for any -stable kernel which supports reshape to RAID0. So 2.6.35 or later. As the bug has been present for five years there is no urgency, so no need to rush into -stable. Fixes: 9af204cf720c ("md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover") Cc: stable@vger.kernel.org (v2.6.35+ - please delay until after -final release). Reported-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-03 11:11:47 +08:00
if (mddev->queue) {
struct md_rdev *rdev;
bool discard_supported = false;
blk_queue_max_hw_sectors(mddev->queue, mddev->chunk_sectors);
blk_queue_max_write_same_sectors(mddev->queue, mddev->chunk_sectors);
md: support REQ_OP_WRITE_ZEROES Copy & paste from the REQ_OP_WRITE_SAME code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-06 01:21:03 +08:00
blk_queue_max_write_zeroes_sectors(mddev->queue, mddev->chunk_sectors);
md/md0: optimize raid0 discard handling There are complaints that raid0 discard handling is slow. Currently we divide discard request into chunks and dispatch to underlayer disks. The block layer will do merge to form big requests. This causes a lot of request split/merge and uses significant CPU time. A simple idea is to calculate the range for each raid disk for an IO request and send a discard request to raid disks, which will avoid the split/merge completely. Previously Coly tried the approach, but the implementation was too complex because of raid0 zones. This patch always split bio in zone boundary and handle bio within one zone. It simplifies the implementation a lot. Reviewed-by: NeilBrown <neilb@suse.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Shaohua Li <shli@fb.com>
2017-05-08 08:36:24 +08:00
blk_queue_max_discard_sectors(mddev->queue, UINT_MAX);
md/raid0: update queue parameter in a safer location. When a (e.g.) RAID5 array is reshaped to RAID0, the updating of queue parameters (e.g. max number of sectors per bio) is done in the wrong place. It should be part of ->run, but it is actually part of ->takeover. This means it happens before level_store() calls: blk_set_stacking_limits(&mddev->queue->limits); and so it ineffective. This can lead to errors from underlying devices. So move all the relevant settings out of create_stripe_zones() and into raid0_run(). As this can lead to a bug-on it is suitable for any -stable kernel which supports reshape to RAID0. So 2.6.35 or later. As the bug has been present for five years there is no urgency, so no need to rush into -stable. Fixes: 9af204cf720c ("md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover") Cc: stable@vger.kernel.org (v2.6.35+ - please delay until after -final release). Reported-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-03 11:11:47 +08:00
blk_queue_io_min(mddev->queue, mddev->chunk_sectors << 9);
blk_queue_io_opt(mddev->queue,
(mddev->chunk_sectors << 9) * mddev->raid_disks);
md/raid0: apply base queue limits *before* disk_stack_limits Calling e.g. blk_queue_max_hw_sectors() after calls to disk_stack_limits() discards the settings determined by disk_stack_limits(). So we need to make those calls first. Fixes: 199dc6ed5179 ("md/raid0: update queue parameter in a safer location.") Cc: stable@vger.kernel.org (v2.6.35+ - please apply with 199dc6ed5179). Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-09-24 13:47:47 +08:00
rdev_for_each(rdev, mddev) {
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->data_offset << 9);
if (blk_queue_discard(bdev_get_queue(rdev->bdev)))
discard_supported = true;
}
md/raid0: update queue parameter in a safer location. When a (e.g.) RAID5 array is reshaped to RAID0, the updating of queue parameters (e.g. max number of sectors per bio) is done in the wrong place. It should be part of ->run, but it is actually part of ->takeover. This means it happens before level_store() calls: blk_set_stacking_limits(&mddev->queue->limits); and so it ineffective. This can lead to errors from underlying devices. So move all the relevant settings out of create_stripe_zones() and into raid0_run(). As this can lead to a bug-on it is suitable for any -stable kernel which supports reshape to RAID0. So 2.6.35 or later. As the bug has been present for five years there is no urgency, so no need to rush into -stable. Fixes: 9af204cf720c ("md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover") Cc: stable@vger.kernel.org (v2.6.35+ - please delay until after -final release). Reported-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-03 11:11:47 +08:00
if (!discard_supported)
block: Use blk_queue_flag_*() in drivers instead of queue_flag_*() This patch has been generated as follows: for verb in set_unlocked clear_unlocked set clear; do replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \ $(git grep -lw queue_flag_${verb} drivers block/bsg*) done Except for protecting all queue flag changes with the queue lock this patch does not change any functionality. Cc: Mike Snitzer <snitzer@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-08 09:10:10 +08:00
blk_queue_flag_clear(QUEUE_FLAG_DISCARD, mddev->queue);
md/raid0: update queue parameter in a safer location. When a (e.g.) RAID5 array is reshaped to RAID0, the updating of queue parameters (e.g. max number of sectors per bio) is done in the wrong place. It should be part of ->run, but it is actually part of ->takeover. This means it happens before level_store() calls: blk_set_stacking_limits(&mddev->queue->limits); and so it ineffective. This can lead to errors from underlying devices. So move all the relevant settings out of create_stripe_zones() and into raid0_run(). As this can lead to a bug-on it is suitable for any -stable kernel which supports reshape to RAID0. So 2.6.35 or later. As the bug has been present for five years there is no urgency, so no need to rush into -stable. Fixes: 9af204cf720c ("md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover") Cc: stable@vger.kernel.org (v2.6.35+ - please delay until after -final release). Reported-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-03 11:11:47 +08:00
else
block: Use blk_queue_flag_*() in drivers instead of queue_flag_*() This patch has been generated as follows: for verb in set_unlocked clear_unlocked set clear; do replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \ $(git grep -lw queue_flag_${verb} drivers block/bsg*) done Except for protecting all queue flag changes with the queue lock this patch does not change any functionality. Cc: Mike Snitzer <snitzer@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-08 09:10:10 +08:00
blk_queue_flag_set(QUEUE_FLAG_DISCARD, mddev->queue);
md/raid0: update queue parameter in a safer location. When a (e.g.) RAID5 array is reshaped to RAID0, the updating of queue parameters (e.g. max number of sectors per bio) is done in the wrong place. It should be part of ->run, but it is actually part of ->takeover. This means it happens before level_store() calls: blk_set_stacking_limits(&mddev->queue->limits); and so it ineffective. This can lead to errors from underlying devices. So move all the relevant settings out of create_stripe_zones() and into raid0_run(). As this can lead to a bug-on it is suitable for any -stable kernel which supports reshape to RAID0. So 2.6.35 or later. As the bug has been present for five years there is no urgency, so no need to rush into -stable. Fixes: 9af204cf720c ("md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover") Cc: stable@vger.kernel.org (v2.6.35+ - please delay until after -final release). Reported-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-03 11:11:47 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* calculate array device size */
md: centralize ->array_sectors modifications Get personalities out of the business of directly modifying ->array_sectors. Lays groundwork to introduce policy on when ->array_sectors can be modified. Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-31 11:59:03 +08:00
md_set_array_sectors(mddev, raid0_size(mddev, 0, 0));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
md/raid0: replace printk() with pr_*() This makes md/raid0 much less verbose as the messages about the array geometry are now pr_debug() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 11:16:50 +08:00
pr_debug("md/raid0:%s: md_size is %llu sectors.\n",
mdname(mddev),
(unsigned long long)mddev->array_sectors);
md raid0: access mddev->queue (request queue member) conditionally because it is not set when accessed from dm-raid The patch makes 3 references to mddev->queue in the raid0 personality conditional in order to allow for it to be accessed from dm-raid. Mandatory, because md instances underneath dm-raid don't manage a request queue of their own which'd lead to oopses without the patch. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Tested-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-14 02:48:01 +08:00
if (mddev->queue) {
/* calculate the max read-ahead size.
* For read-ahead of large files to be effective, we need to
* readahead at least twice a whole stripe. i.e. number of devices
* multiplied by chunk size times 2.
* If an individual device has an ra_pages greater than the
* chunk size, then we will not drive that device as hard as it
* wants. We consider this a configuration error: a larger
* chunksize should be used in that case.
*/
md: Make mddev->chunk_size sector-based. This patch renames the chunk_size field to chunk_sectors with the implied change of semantics. Since is_power_of_2(chunk_size) = is_power_of_2(chunk_sectors << 9) = is_power_of_2(chunk_sectors) these bits don't need an adjustment for the shift. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-18 06:45:01 +08:00
int stripe = mddev->raid_disks *
(mddev->chunk_sectors << 9) / PAGE_SIZE;
block: Use pointer to backing_dev_info from request_queue We will want to have struct backing_dev_info allocated separately from struct request_queue. As the first step add pointer to backing_dev_info to request_queue and convert all users touching it. No functional changes in this patch. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-02 22:56:50 +08:00
if (mddev->queue->backing_dev_info->ra_pages < 2* stripe)
mddev->queue->backing_dev_info->ra_pages = 2* stripe;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
md: have raid0 report its formation Report to the user what are the raid zones Signed-off-by: raziebe@gmail.com Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 15:00:54 +08:00
dump_zones(mddev);
md/raid0: If md_integrity_register() fails, raid0_run() must free the mem. Signed-off-by: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-02 07:48:37 +08:00
ret = md_integrity_register(mddev);
return ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
md: rename ->stop to ->free Now that the ->stop function only frees the private data, rename is accordingly. Also pass in the private pointer as an arg rather than using mddev->private. This flexibility will be useful in level_store(). Finally, don't clear ->private. It doesn't make sense to clear it seeing that isn't what we free, and it is no longer necessary to clear ->private (it was some time ago before ->to_remove was introduced). Setting ->to_remove in ->free() is a bit of a wart, but not a big problem at the moment. Signed-off-by: NeilBrown <neilb@suse.de>
2014-12-15 09:56:58 +08:00
static void raid0_free(struct mddev *mddev, void *priv)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
md: rename ->stop to ->free Now that the ->stop function only frees the private data, rename is accordingly. Also pass in the private pointer as an arg rather than using mddev->private. This flexibility will be useful in level_store(). Finally, don't clear ->private. It doesn't make sense to clear it seeing that isn't what we free, and it is no longer necessary to clear ->private (it was some time ago before ->to_remove was introduced). Setting ->to_remove in ->free() is a bit of a wart, but not a big problem at the moment. Signed-off-by: NeilBrown <neilb@suse.de>
2014-12-15 09:56:58 +08:00
struct r0conf *conf = priv;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] md: remove unneeded NULL checks before kfree This patch removes some unneeded checks of pointers being NULL before calling kfree() on them. kfree() handles NULL pointers just fine, checking first is pointless. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22 08:17:30 +08:00
kfree(conf->strip_zone);
md: raid0: Fix a memory leak when stopping a raid0 array. raid0_stop() removes all references to the raid0 configuration but misses to free the ->devlist buffer. This patch closes this leak, removes a pointless initialization and fixes a coding style issue in raid0_stop(). Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 14:48:19 +08:00
kfree(conf->devlist);
[PATCH] md: remove unneeded NULL checks before kfree This patch removes some unneeded checks of pointers being NULL before calling kfree() on them. kfree() handles NULL pointers just fine, checking first is pointless. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22 08:17:30 +08:00
kfree(conf);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
md: raid0 :Enables chunk size other than powers of 2. Maintain two flows, one for pow2 chunk sizes (which uses masks and shift), and a flow for the general case (which uses sector_div). This is for the sake of performance. - introduce map_sector and is_io_in_chunk_boundary to encapsulate those two flows better for raid0_make_request - fix blk_mergeable to support the two flows. Signed-off-by: raziebe@gmail.com Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 15:02:05 +08:00
/*
* Is io distribute over 1 or more chunks ?
*/
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:47:53 +08:00
static inline int is_io_in_chunk_boundary(struct mddev *mddev,
md: raid0 :Enables chunk size other than powers of 2. Maintain two flows, one for pow2 chunk sizes (which uses masks and shift), and a flow for the general case (which uses sector_div). This is for the sake of performance. - introduce map_sector and is_io_in_chunk_boundary to encapsulate those two flows better for raid0_make_request - fix blk_mergeable to support the two flows. Signed-off-by: raziebe@gmail.com Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 15:02:05 +08:00
unsigned int chunk_sects, struct bio *bio)
{
md: raid0: chunk_sectors cleanups. following the conversion to chunk_sectors, there is room for cleaning up a little. Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-18 06:47:00 +08:00
if (likely(is_power_of_2(chunk_sects))) {
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-12 06:44:27 +08:00
return chunk_sects >=
((bio->bi_iter.bi_sector & (chunk_sects-1))
block: Use bio_sectors() more consistently Bunch of places in the code weren't using it where they could be - this'll reduce the size of the patch that puts bi_sector/bi_size/bi_idx into a struct bvec_iter. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> CC: "Ed L. Cashin" <ecashin@coraid.com> CC: Nick Piggin <npiggin@kernel.dk> CC: Jiri Kosina <jkosina@suse.cz> CC: Jim Paris <jim@jtan.com> CC: Geoff Levand <geoff@infradead.org> CC: Alasdair Kergon <agk@redhat.com> CC: dm-devel@redhat.com CC: Neil Brown <neilb@suse.de> CC: Steven Rostedt <rostedt@goodmis.org> Acked-by: Ed Cashin <ecashin@coraid.com>
2013-02-06 07:19:29 +08:00
+ bio_sectors(bio));
md: raid0 :Enables chunk size other than powers of 2. Maintain two flows, one for pow2 chunk sizes (which uses masks and shift), and a flow for the general case (which uses sector_div). This is for the sake of performance. - introduce map_sector and is_io_in_chunk_boundary to encapsulate those two flows better for raid0_make_request - fix blk_mergeable to support the two flows. Signed-off-by: raziebe@gmail.com Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 15:02:05 +08:00
} else{
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-12 06:44:27 +08:00
sector_t sector = bio->bi_iter.bi_sector;
md: raid0 :Enables chunk size other than powers of 2. Maintain two flows, one for pow2 chunk sizes (which uses masks and shift), and a flow for the general case (which uses sector_div). This is for the sake of performance. - introduce map_sector and is_io_in_chunk_boundary to encapsulate those two flows better for raid0_make_request - fix blk_mergeable to support the two flows. Signed-off-by: raziebe@gmail.com Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 15:02:05 +08:00
return chunk_sects >= (sector_div(sector, chunk_sects)
block: Use bio_sectors() more consistently Bunch of places in the code weren't using it where they could be - this'll reduce the size of the patch that puts bi_sector/bi_size/bi_idx into a struct bvec_iter. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> CC: "Ed L. Cashin" <ecashin@coraid.com> CC: Nick Piggin <npiggin@kernel.dk> CC: Jiri Kosina <jkosina@suse.cz> CC: Jim Paris <jim@jtan.com> CC: Geoff Levand <geoff@infradead.org> CC: Alasdair Kergon <agk@redhat.com> CC: dm-devel@redhat.com CC: Neil Brown <neilb@suse.de> CC: Steven Rostedt <rostedt@goodmis.org> Acked-by: Ed Cashin <ecashin@coraid.com>
2013-02-06 07:19:29 +08:00
+ bio_sectors(bio));
md: raid0 :Enables chunk size other than powers of 2. Maintain two flows, one for pow2 chunk sizes (which uses masks and shift), and a flow for the general case (which uses sector_div). This is for the sake of performance. - introduce map_sector and is_io_in_chunk_boundary to encapsulate those two flows better for raid0_make_request - fix blk_mergeable to support the two flows. Signed-off-by: raziebe@gmail.com Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 15:02:05 +08:00
}
}
md/md0: optimize raid0 discard handling There are complaints that raid0 discard handling is slow. Currently we divide discard request into chunks and dispatch to underlayer disks. The block layer will do merge to form big requests. This causes a lot of request split/merge and uses significant CPU time. A simple idea is to calculate the range for each raid disk for an IO request and send a discard request to raid disks, which will avoid the split/merge completely. Previously Coly tried the approach, but the implementation was too complex because of raid0 zones. This patch always split bio in zone boundary and handle bio within one zone. It simplifies the implementation a lot. Reviewed-by: NeilBrown <neilb@suse.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Shaohua Li <shli@fb.com>
2017-05-08 08:36:24 +08:00
static void raid0_handle_discard(struct mddev *mddev, struct bio *bio)
{
struct r0conf *conf = mddev->private;
struct strip_zone *zone;
sector_t start = bio->bi_iter.bi_sector;
sector_t end;
unsigned int stripe_size;
sector_t first_stripe_index, last_stripe_index;
sector_t start_disk_offset;
unsigned int start_disk_index;
sector_t end_disk_offset;
unsigned int end_disk_index;
unsigned int disk;
zone = find_zone(conf, &start);
if (bio_end_sector(bio) > zone->zone_end) {
struct bio *split = bio_split(bio,
zone->zone_end - bio->bi_iter.bi_sector, GFP_NOIO,
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-21 06:25:52 +08:00
&mddev->bio_set);
md/md0: optimize raid0 discard handling There are complaints that raid0 discard handling is slow. Currently we divide discard request into chunks and dispatch to underlayer disks. The block layer will do merge to form big requests. This causes a lot of request split/merge and uses significant CPU time. A simple idea is to calculate the range for each raid disk for an IO request and send a discard request to raid disks, which will avoid the split/merge completely. Previously Coly tried the approach, but the implementation was too complex because of raid0 zones. This patch always split bio in zone boundary and handle bio within one zone. It simplifies the implementation a lot. Reviewed-by: NeilBrown <neilb@suse.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Shaohua Li <shli@fb.com>
2017-05-08 08:36:24 +08:00
bio_chain(split, bio);
generic_make_request(bio);
bio = split;
end = zone->zone_end;
} else
end = bio_end_sector(bio);
if (zone != conf->strip_zone)
end = end - zone[-1].zone_end;
/* Now start and end is the offset in zone */
stripe_size = zone->nb_dev * mddev->chunk_sectors;
first_stripe_index = start;
sector_div(first_stripe_index, stripe_size);
last_stripe_index = end;
sector_div(last_stripe_index, stripe_size);
start_disk_index = (int)(start - first_stripe_index * stripe_size) /
mddev->chunk_sectors;
start_disk_offset = ((int)(start - first_stripe_index * stripe_size) %
mddev->chunk_sectors) +
first_stripe_index * mddev->chunk_sectors;
end_disk_index = (int)(end - last_stripe_index * stripe_size) /
mddev->chunk_sectors;
end_disk_offset = ((int)(end - last_stripe_index * stripe_size) %
mddev->chunk_sectors) +
last_stripe_index * mddev->chunk_sectors;
for (disk = 0; disk < zone->nb_dev; disk++) {
sector_t dev_start, dev_end;
struct bio *discard_bio = NULL;
struct md_rdev *rdev;
if (disk < start_disk_index)
dev_start = (first_stripe_index + 1) *
mddev->chunk_sectors;
else if (disk > start_disk_index)
dev_start = first_stripe_index * mddev->chunk_sectors;
else
dev_start = start_disk_offset;
if (disk < end_disk_index)
dev_end = (last_stripe_index + 1) * mddev->chunk_sectors;
else if (disk > end_disk_index)
dev_end = last_stripe_index * mddev->chunk_sectors;
else
dev_end = end_disk_offset;
if (dev_end <= dev_start)
continue;
rdev = conf->devlist[(zone - conf->strip_zone) *
conf->strip_zone[0].nb_dev + disk];
if (__blkdev_issue_discard(rdev->bdev,
dev_start + zone->dev_start + rdev->data_offset,
dev_end - dev_start, GFP_NOIO, 0, &discard_bio) ||
!discard_bio)
continue;
bio_chain(discard_bio, bio);
blkcg: remove bio->bi_css and instead use bio->bi_blkg Prior patches ensured that any bio that interacts with a request_queue is properly associated with a blkg. This makes bio->bi_css unnecessary as blkg maintains a reference to blkcg already. This removes the bio field bi_css and transfers corresponding uses to access via bi_blkg. Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-06 01:10:35 +08:00
bio_clone_blkg_association(discard_bio, bio);
md/md0: optimize raid0 discard handling There are complaints that raid0 discard handling is slow. Currently we divide discard request into chunks and dispatch to underlayer disks. The block layer will do merge to form big requests. This causes a lot of request split/merge and uses significant CPU time. A simple idea is to calculate the range for each raid disk for an IO request and send a discard request to raid disks, which will avoid the split/merge completely. Previously Coly tried the approach, but the implementation was too complex because of raid0 zones. This patch always split bio in zone boundary and handle bio within one zone. It simplifies the implementation a lot. Reviewed-by: NeilBrown <neilb@suse.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Shaohua Li <shli@fb.com>
2017-05-08 08:36:24 +08:00
if (mddev->gendisk)
trace_block_bio_remap(bdev_get_queue(rdev->bdev),
discard_bio, disk_devt(mddev->gendisk),
bio->bi_iter.bi_sector);
generic_make_request(discard_bio);
}
bio_endio(bio);
}
md: fix deadlock between mddev_suspend() and md_write_start() If mddev_suspend() races with md_write_start() we can deadlock with mddev_suspend() waiting for the request that is currently in md_write_start() to complete the ->make_request() call, and md_write_start() waiting for the metadata to be updated to mark the array as 'dirty'. As metadata updates done by md_check_recovery() only happen then the mddev_lock() can be claimed, and as mddev_suspend() is often called with the lock held, these threads wait indefinitely for each other. We fix this by having md_write_start() abort if mddev_suspend() is happening, and ->make_request() aborts if md_write_start() aborted. md_make_request() can detect this abort, decrease the ->active_io count, and wait for mddev_suspend(). Reported-by: Nix <nix@esperi.org.uk> Fix: 68866e425be2(MD: no sync IO while suspended) Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-06-05 14:49:39 +08:00
static bool raid0_make_request(struct mddev *mddev, struct bio *bio)
md: raid0 :Enables chunk size other than powers of 2. Maintain two flows, one for pow2 chunk sizes (which uses masks and shift), and a flow for the general case (which uses sector_div). This is for the sake of performance. - introduce map_sector and is_io_in_chunk_boundary to encapsulate those two flows better for raid0_make_request - fix blk_mergeable to support the two flows. Signed-off-by: raziebe@gmail.com Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-16 15:02:05 +08:00
{
md/raid0: avoid RAID0 data corruption due to layout confusion. If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b1012 ("block: Introduce new bio_split()") cc: stable@vger.kernel.org (3.14+) Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-09 14:30:02 +08:00
struct r0conf *conf = mddev->private;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct strip_zone *zone;
md: removing typedefs: mdk_rdev_t -> struct md_rdev The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:45:26 +08:00
struct md_rdev *tmp_dev;
md/raid0: fix up bio splitting. raid0_make_request() should use a private bio_set rather than the shared fs_bio_set, which is only meant for filesystems to use. raid0_make_request() shouldn't loop around using the bio_set multiple times as that can deadlock. So use mddev->bio_set and pass the tail to generic_make_request() instead of looping on it. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 12:05:51 +08:00
sector_t bio_sector;
sector_t sector;
md/raid0: avoid RAID0 data corruption due to layout confusion. If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b1012 ("block: Introduce new bio_split()") cc: stable@vger.kernel.org (3.14+) Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-09 14:30:02 +08:00
sector_t orig_sector;
md/raid0: fix up bio splitting. raid0_make_request() should use a private bio_set rather than the shared fs_bio_set, which is only meant for filesystems to use. raid0_make_request() shouldn't loop around using the bio_set multiple times as that can deadlock. So use mddev->bio_set and pass the tail to generic_make_request() instead of looping on it. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 12:05:51 +08:00
unsigned chunk_sects;
unsigned sectors;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
md: improve handling of bio with REQ_PREFLUSH in md_flush_request() If pers->make_request fails in md_flush_request(), the bio is lost. To fix this, pass back a bool to indicate if the original make_request call should continue to handle the I/O and instead of assuming the flush logic will push it to completion. Convert md_flush_request to return a bool and no longer calls the raid driver's make_request function. If the return is true, then the md flush logic has or will complete the bio and the md make_request call is done. If false, then the md make_request function needs to keep processing like it is a normal bio. Let the original call to md_handle_request handle any need to retry sending the bio to the raid driver's make_request function should it be needed. Also mark md_flush_request and the make_request function pointer as __must_check to issue warnings should these critical return values be ignored. Fixes: 2bc13b83e629 ("md: batch flush requests.") Cc: stable@vger.kernel.org # # v4.19+ Cc: NeilBrown <neilb@suse.com> Signed-off-by: David Jeffery <djeffery@redhat.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-17 01:15:14 +08:00
if (unlikely(bio->bi_opf & REQ_PREFLUSH)
&& md_flush_request(mddev, bio))
md: fix deadlock between mddev_suspend() and md_write_start() If mddev_suspend() races with md_write_start() we can deadlock with mddev_suspend() waiting for the request that is currently in md_write_start() to complete the ->make_request() call, and md_write_start() waiting for the metadata to be updated to mark the array as 'dirty'. As metadata updates done by md_check_recovery() only happen then the mddev_lock() can be claimed, and as mddev_suspend() is often called with the lock held, these threads wait indefinitely for each other. We fix this by having md_write_start() abort if mddev_suspend() is happening, and ->make_request() aborts if md_write_start() aborted. md_make_request() can detect this abort, decrease the ->active_io count, and wait for mddev_suspend(). Reported-by: Nix <nix@esperi.org.uk> Fix: 68866e425be2(MD: no sync IO while suspended) Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-06-05 14:49:39 +08:00
return true;
[PATCH] md: fail IO request to md that require a barrier. md does not yet support BIO_RW_BARRIER, so be honest about it and fail (-EOPNOTSUPP) any such requests. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 07:23:41 +08:00
md/md0: optimize raid0 discard handling There are complaints that raid0 discard handling is slow. Currently we divide discard request into chunks and dispatch to underlayer disks. The block layer will do merge to form big requests. This causes a lot of request split/merge and uses significant CPU time. A simple idea is to calculate the range for each raid disk for an IO request and send a discard request to raid disks, which will avoid the split/merge completely. Previously Coly tried the approach, but the implementation was too complex because of raid0 zones. This patch always split bio in zone boundary and handle bio within one zone. It simplifies the implementation a lot. Reviewed-by: NeilBrown <neilb@suse.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Shaohua Li <shli@fb.com>
2017-05-08 08:36:24 +08:00
if (unlikely((bio_op(bio) == REQ_OP_DISCARD))) {
raid0_handle_discard(mddev, bio);
md: fix deadlock between mddev_suspend() and md_write_start() If mddev_suspend() races with md_write_start() we can deadlock with mddev_suspend() waiting for the request that is currently in md_write_start() to complete the ->make_request() call, and md_write_start() waiting for the metadata to be updated to mark the array as 'dirty'. As metadata updates done by md_check_recovery() only happen then the mddev_lock() can be claimed, and as mddev_suspend() is often called with the lock held, these threads wait indefinitely for each other. We fix this by having md_write_start() abort if mddev_suspend() is happening, and ->make_request() aborts if md_write_start() aborted. md_make_request() can detect this abort, decrease the ->active_io count, and wait for mddev_suspend(). Reported-by: Nix <nix@esperi.org.uk> Fix: 68866e425be2(MD: no sync IO while suspended) Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-06-05 14:49:39 +08:00
return true;
md/md0: optimize raid0 discard handling There are complaints that raid0 discard handling is slow. Currently we divide discard request into chunks and dispatch to underlayer disks. The block layer will do merge to form big requests. This causes a lot of request split/merge and uses significant CPU time. A simple idea is to calculate the range for each raid disk for an IO request and send a discard request to raid disks, which will avoid the split/merge completely. Previously Coly tried the approach, but the implementation was too complex because of raid0 zones. This patch always split bio in zone boundary and handle bio within one zone. It simplifies the implementation a lot. Reviewed-by: NeilBrown <neilb@suse.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Shaohua Li <shli@fb.com>
2017-05-08 08:36:24 +08:00
}
md/raid0: fix up bio splitting. raid0_make_request() should use a private bio_set rather than the shared fs_bio_set, which is only meant for filesystems to use. raid0_make_request() shouldn't loop around using the bio_set multiple times as that can deadlock. So use mddev->bio_set and pass the tail to generic_make_request() instead of looping on it. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 12:05:51 +08:00
bio_sector = bio->bi_iter.bi_sector;
sector = bio_sector;
chunk_sects = mddev->chunk_sectors;
block: Introduce new bio_split() The new bio_split() can split arbitrary bios - it's not restricted to single page bios, like the old bio_split() (previously renamed to bio_pair_split()). It also has different semantics - it doesn't allocate a struct bio_pair, leaving it up to the caller to handle completions. Then convert the existing bio_pair_split() users to the new bio_split() - and also nvme, which was open coding bio splitting. (We have to take that BUG_ON() out of bio_integrity_trim() because this bio_split() needs to use it, and there's no reason it has to be used on bios marked as cloned; BIO_CLONED doesn't seem to have clearly documented semantics anyways.) Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Neil Brown <neilb@suse.de>
2013-11-24 10:21:01 +08:00
md/raid0: fix up bio splitting. raid0_make_request() should use a private bio_set rather than the shared fs_bio_set, which is only meant for filesystems to use. raid0_make_request() shouldn't loop around using the bio_set multiple times as that can deadlock. So use mddev->bio_set and pass the tail to generic_make_request() instead of looping on it. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 12:05:51 +08:00
sectors = chunk_sects -
(likely(is_power_of_2(chunk_sects))
? (sector & (chunk_sects-1))
: sector_div(sector, chunk_sects));
block: Introduce new bio_split() The new bio_split() can split arbitrary bios - it's not restricted to single page bios, like the old bio_split() (previously renamed to bio_pair_split()). It also has different semantics - it doesn't allocate a struct bio_pair, leaving it up to the caller to handle completions. Then convert the existing bio_pair_split() users to the new bio_split() - and also nvme, which was open coding bio splitting. (We have to take that BUG_ON() out of bio_integrity_trim() because this bio_split() needs to use it, and there's no reason it has to be used on bios marked as cloned; BIO_CLONED doesn't seem to have clearly documented semantics anyways.) Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Neil Brown <neilb@suse.de>
2013-11-24 10:21:01 +08:00
md/raid0: fix up bio splitting. raid0_make_request() should use a private bio_set rather than the shared fs_bio_set, which is only meant for filesystems to use. raid0_make_request() shouldn't loop around using the bio_set multiple times as that can deadlock. So use mddev->bio_set and pass the tail to generic_make_request() instead of looping on it. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 12:05:51 +08:00
/* Restore due to sector_div */
sector = bio_sector;
md/raid0: fix restore to sector variable in raid0_make_request The variable "sector" in "raid0_make_request()" was improperly updated by a call to "sector_div()" which modifies its first argument in place. Commit 47d68979cc968535cb87f3e5f2e6a3533ea48fbd restored this variable after the call for later re-use. Unfortunetly the restore was done after the referenced variable "bio" was advanced. This lead to the original value and the restored value being different. Here we move this line to the proper place. One observed side effect of this bug was discarding a file though unlinking would cause an unrelated file's contents to be discarded. Signed-off-by: NeilBrown <neilb@suse.de> Fixes: 47d68979cc96 ("md/raid0: fix bug with chunksize not a power of 2.") Cc: stable@vger.kernel.org (any that received above backport) URL: https://bugzilla.kernel.org/show_bug.cgi?id=98501
2015-05-19 14:26:23 +08:00
md/raid0: fix up bio splitting. raid0_make_request() should use a private bio_set rather than the shared fs_bio_set, which is only meant for filesystems to use. raid0_make_request() shouldn't loop around using the bio_set multiple times as that can deadlock. So use mddev->bio_set and pass the tail to generic_make_request() instead of looping on it. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 12:05:51 +08:00
if (sectors < bio_sectors(bio)) {
md: convert to bioset_init()/mempool_init() Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-21 06:25:52 +08:00
struct bio *split = bio_split(bio, sectors, GFP_NOIO,
&mddev->bio_set);
md/raid0: fix up bio splitting. raid0_make_request() should use a private bio_set rather than the shared fs_bio_set, which is only meant for filesystems to use. raid0_make_request() shouldn't loop around using the bio_set multiple times as that can deadlock. So use mddev->bio_set and pass the tail to generic_make_request() instead of looping on it. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 12:05:51 +08:00
bio_chain(split, bio);
generic_make_request(bio);
bio = split;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
md/raid0: avoid RAID0 data corruption due to layout confusion. If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b1012 ("block: Introduce new bio_split()") cc: stable@vger.kernel.org (3.14+) Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-09 14:30:02 +08:00
orig_sector = sector;
md/raid0: fix up bio splitting. raid0_make_request() should use a private bio_set rather than the shared fs_bio_set, which is only meant for filesystems to use. raid0_make_request() shouldn't loop around using the bio_set multiple times as that can deadlock. So use mddev->bio_set and pass the tail to generic_make_request() instead of looping on it. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 12:05:51 +08:00
zone = find_zone(mddev->private, &sector);
md/raid0: avoid RAID0 data corruption due to layout confusion. If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b1012 ("block: Introduce new bio_split()") cc: stable@vger.kernel.org (3.14+) Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-09 14:30:02 +08:00
switch (conf->layout) {
case RAID0_ORIG_LAYOUT:
tmp_dev = map_sector(mddev, zone, orig_sector, &sector);
break;
case RAID0_ALT_MULTIZONE_LAYOUT:
tmp_dev = map_sector(mddev, zone, sector, &sector);
break;
default:
md/raid0: Fix an error message in raid0_make_request() The first argument to WARN() is supposed to be a condition. The original code will just print the mdname() instead of the full warning message. Fixes: c84a1372df92 ("md/raid0: avoid RAID0 data corruption due to layout confusion.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-21 14:00:31 +08:00
WARN(1, "md/raid0:%s: Invalid layout\n", mdname(mddev));
md/raid0: avoid RAID0 data corruption due to layout confusion. If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b1012 ("block: Introduce new bio_split()") cc: stable@vger.kernel.org (3.14+) Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-09 14:30:02 +08:00
bio_io_error(bio);
return true;
}
md raid0/linear: Mark array as 'broken' and fail BIOs if a member is gone Currently md raid0/linear are not provided with any mechanism to validate if an array member got removed or failed. The driver keeps sending BIOs regardless of the state of array members, and kernel shows state 'clean' in the 'array_state' sysfs attribute. This leads to the following situation: if a raid0/linear array member is removed and the array is mounted, some user writing to this array won't realize that errors are happening unless they check dmesg or perform one fsync per written file. Despite udev signaling the member device is gone, 'mdadm' cannot issue the STOP_ARRAY ioctl successfully, given the array is mounted. In other words, no -EIO is returned and writes (except direct ones) appear normal. Meaning the user might think the wrote data is correctly stored in the array, but instead garbage was written given that raid0 does stripping (and so, it requires all its members to be working in order to not corrupt data). For md/linear, writes to the available members will work fine, but if the writes go to the missing member(s), it'll cause a file corruption situation, whereas the portion of the writes to the missing devices aren't written effectively. This patch changes this behavior: we check if the block device's gendisk is UP when submitting the BIO to the array member, and if it isn't, we flag the md device as MD_BROKEN and fail subsequent I/Os to that device; a read request to the array requiring data from a valid member is still completed. While flagging the device as MD_BROKEN, we also show a rate-limited warning in the kernel log. A new array state 'broken' was added too: it mimics the state 'clean' in every aspect, being useful only to distinguish if the array has some member missing. We rely on the MD_BROKEN flag to put the array in the 'broken' state. This state cannot be written in 'array_state' as it just shows one or more members of the array are missing but acts like 'clean', it wouldn't make sense to write it. With this patch, the filesystem reacts much faster to the event of missing array member: after some I/O errors, ext4 for instance aborts the journal and prevents corruption. Without this change, we're able to keep writing in the disk and after a machine reboot, e2fsck shows some severe fs errors that demand fixing. This patch was tested in ext4 and xfs filesystems, and requires a 'mdadm' counterpart to handle the 'broken' state. Cc: Song Liu <songliubraving@fb.com> Reviewed-by: NeilBrown <neilb@suse.de> Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-04 03:49:00 +08:00
if (unlikely(is_mddev_broken(tmp_dev, "raid0"))) {
bio_io_error(bio);
return true;
}
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-24 01:10:32 +08:00
bio_set_dev(bio, tmp_dev->bdev);
md/raid0: fix up bio splitting. raid0_make_request() should use a private bio_set rather than the shared fs_bio_set, which is only meant for filesystems to use. raid0_make_request() shouldn't loop around using the bio_set multiple times as that can deadlock. So use mddev->bio_set and pass the tail to generic_make_request() instead of looping on it. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-05 12:05:51 +08:00
bio->bi_iter.bi_sector = sector + zone->dev_start +
tmp_dev->data_offset;
md/md0: optimize raid0 discard handling There are complaints that raid0 discard handling is slow. Currently we divide discard request into chunks and dispatch to underlayer disks. The block layer will do merge to form big requests. This causes a lot of request split/merge and uses significant CPU time. A simple idea is to calculate the range for each raid disk for an IO request and send a discard request to raid disks, which will avoid the split/merge completely. Previously Coly tried the approach, but the implementation was too complex because of raid0 zones. This patch always split bio in zone boundary and handle bio within one zone. It simplifies the implementation a lot. Reviewed-by: NeilBrown <neilb@suse.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Shaohua Li <shli@fb.com>
2017-05-08 08:36:24 +08:00
if (mddev->gendisk)
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-24 01:10:32 +08:00
trace_block_bio_remap(bio->bi_disk->queue, bio,
disk_devt(mddev->gendisk), bio_sector);
md/md0: optimize raid0 discard handling There are complaints that raid0 discard handling is slow. Currently we divide discard request into chunks and dispatch to underlayer disks. The block layer will do merge to form big requests. This causes a lot of request split/merge and uses significant CPU time. A simple idea is to calculate the range for each raid disk for an IO request and send a discard request to raid disks, which will avoid the split/merge completely. Previously Coly tried the approach, but the implementation was too complex because of raid0 zones. This patch always split bio in zone boundary and handle bio within one zone. It simplifies the implementation a lot. Reviewed-by: NeilBrown <neilb@suse.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Shaohua Li <shli@fb.com>
2017-05-08 08:36:24 +08:00
mddev_check_writesame(mddev, bio);
mddev_check_write_zeroes(mddev, bio);
generic_make_request(bio);
md: fix deadlock between mddev_suspend() and md_write_start() If mddev_suspend() races with md_write_start() we can deadlock with mddev_suspend() waiting for the request that is currently in md_write_start() to complete the ->make_request() call, and md_write_start() waiting for the metadata to be updated to mark the array as 'dirty'. As metadata updates done by md_check_recovery() only happen then the mddev_lock() can be claimed, and as mddev_suspend() is often called with the lock held, these threads wait indefinitely for each other. We fix this by having md_write_start() abort if mddev_suspend() is happening, and ->make_request() aborts if md_write_start() aborted. md_make_request() can detect this abort, decrease the ->active_io count, and wait for mddev_suspend(). Reported-by: Nix <nix@esperi.org.uk> Fix: 68866e425be2(MD: no sync IO while suspended) Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-06-05 14:49:39 +08:00
return true;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
md: fix a bug in some never-used code. http://bugzilla.kernel.org/show_bug.cgi?id=3277 There is a seq_printf here that isn't being passed a 'seq'. Howeve as the code is inside #ifdef MD_DEBUG, nobody noticed. Also remove some extra spaces. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 14:30:53 +08:00
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:47:53 +08:00
static void raid0_status(struct seq_file *seq, struct mddev *mddev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
md: Make mddev->chunk_size sector-based. This patch renames the chunk_size field to chunk_sectors with the implied change of semantics. Since is_power_of_2(chunk_size) = is_power_of_2(chunk_sectors << 9) = is_power_of_2(chunk_sectors) these bits don't need an adjustment for the shift. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-18 06:45:01 +08:00
seq_printf(seq, " %dk chunks", mddev->chunk_sectors / 2);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return;
}
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:47:53 +08:00
static void *raid0_takeover_raid45(struct mddev *mddev)
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
{
md: removing typedefs: mdk_rdev_t -> struct md_rdev The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:45:26 +08:00
struct md_rdev *rdev;
md/raid0: typedef removal: raid0_conf_t -> struct r0conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:48:59 +08:00
struct r0conf *priv_conf;
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
if (mddev->degraded != 1) {
md/raid0: replace printk() with pr_*() This makes md/raid0 much less verbose as the messages about the array geometry are now pr_debug() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 11:16:50 +08:00
pr_warn("md/raid0:%s: raid5 must be degraded! Degraded disks: %d\n",
mdname(mddev),
mddev->degraded);
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
return ERR_PTR(-EINVAL);
}
md: tidy up rdev_for_each usage. md.h has an 'rdev_for_each()' macro for iterating the rdevs in an mddev. However it uses the 'safe' version of list_for_each_entry, and so requires the extra variable, but doesn't include 'safe' in the name, which is useful documentation. Consequently some places use this safe version without needing it, and many use an explicity list_for_each entry. So: - rename rdev_for_each to rdev_for_each_safe - create a new rdev_for_each which uses the plain list_for_each_entry, - use the 'safe' version only where needed, and convert all other list_for_each_entry calls to use rdev_for_each. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19 09:46:39 +08:00
rdev_for_each(rdev, mddev) {
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
/* check slot number for a disk */
if (rdev->raid_disk == mddev->raid_disks-1) {
md/raid0: replace printk() with pr_*() This makes md/raid0 much less verbose as the messages about the array geometry are now pr_debug() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 11:16:50 +08:00
pr_warn("md/raid0:%s: raid5 must have missing parity disk!\n",
mdname(mddev));
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
return ERR_PTR(-EINVAL);
}
md: fix buglet in RAID5 -> RAID0 conversion. RAID5 uses a 'per-array' value for the 'size' of each device. RAID0 uses a 'per-device' value - it can be different for each device. When converting a RAID5 to a RAID0 we must ensure that the per-device size of each device matches the per-array size for the RAID5, else the array will change size. If the metadata cannot record a changed per-device size (as is the case with v0.90 metadata) the array could get bigger on restart. This does not cause data corruption, so it not a big issue and is mainly yet another a reason to not use 0.90. Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-26 09:55:20 +08:00
rdev->sectors = mddev->dev_sectors;
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
}
/* Set new parameters */
mddev->new_level = 0;
md: clear layout after ->raid0 takeover After takeover from raid5/10 -> raid0 mddev->layout is not cleared. Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-16 18:55:14 +08:00
mddev->new_layout = 0;
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
mddev->new_chunk_sectors = mddev->chunk_sectors;
mddev->raid_disks--;
mddev->delta_disks = -1;
/* make sure it will be not marked as dirty */
mddev->recovery_cp = MaxSector;
md: cleanup mddev flag clear for takeover Commit 6995f0b (md: takeover should clear unrelated bits) clear unrelated bits, but it's quite fragile. To avoid error in the future, define a macro for unsupported mddev flags for each raid type and use it to clear unsupported mddev flags. This should be less error-prone. Suggested-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-01-05 08:10:19 +08:00
mddev_clear_unsupported_flags(mddev, UNSUPPORTED_MDDEV_FLAGS);
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
create_strip_zones(mddev, &priv_conf);
md: takeover should clear unrelated bits When we change level from raid1 to raid5, the MD_FAILFAST_SUPPORTED bit will be accidentally set, but raid5 doesn't support it. The same is true for the MD_HAS_JOURNAL bit. Fix: 46533ff (md: Use REQ_FAILFAST_* on metadata writes where appropriate) Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-12-09 07:48:17 +08:00
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
return priv_conf;
}
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:47:53 +08:00
static void *raid0_takeover_raid10(struct mddev *mddev)
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
{
md/raid0: typedef removal: raid0_conf_t -> struct r0conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:48:59 +08:00
struct r0conf *priv_conf;
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
/* Check layout:
* - far_copies must be 1
* - near_copies must be 2
* - disks number must be even
* - all mirrors must be already degraded
*/
if (mddev->layout != ((1 << 8) + 2)) {
md/raid0: replace printk() with pr_*() This makes md/raid0 much less verbose as the messages about the array geometry are now pr_debug() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 11:16:50 +08:00
pr_warn("md/raid0:%s:: Raid0 cannot takeover layout: 0x%x\n",
mdname(mddev),
mddev->layout);
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
return ERR_PTR(-EINVAL);
}
if (mddev->raid_disks & 1) {
md/raid0: replace printk() with pr_*() This makes md/raid0 much less verbose as the messages about the array geometry are now pr_debug() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 11:16:50 +08:00
pr_warn("md/raid0:%s: Raid0 cannot takeover Raid10 with odd disk number.\n",
mdname(mddev));
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
return ERR_PTR(-EINVAL);
}
if (mddev->degraded != (mddev->raid_disks>>1)) {
md/raid0: replace printk() with pr_*() This makes md/raid0 much less verbose as the messages about the array geometry are now pr_debug() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 11:16:50 +08:00
pr_warn("md/raid0:%s: All mirrors must be already degraded!\n",
mdname(mddev));
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
return ERR_PTR(-EINVAL);
}
/* Set new parameters */
mddev->new_level = 0;
md: clear layout after ->raid0 takeover After takeover from raid5/10 -> raid0 mddev->layout is not cleared. Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-16 18:55:14 +08:00
mddev->new_layout = 0;
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
mddev->new_chunk_sectors = mddev->chunk_sectors;
mddev->delta_disks = - mddev->raid_disks / 2;
mddev->raid_disks += mddev->delta_disks;
mddev->degraded = 0;
/* make sure it will be not marked as dirty */
mddev->recovery_cp = MaxSector;
md: cleanup mddev flag clear for takeover Commit 6995f0b (md: takeover should clear unrelated bits) clear unrelated bits, but it's quite fragile. To avoid error in the future, define a macro for unsupported mddev flags for each raid type and use it to clear unsupported mddev flags. This should be less error-prone. Suggested-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-01-05 08:10:19 +08:00
mddev_clear_unsupported_flags(mddev, UNSUPPORTED_MDDEV_FLAGS);
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
create_strip_zones(mddev, &priv_conf);
return priv_conf;
}
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:47:53 +08:00
static void *raid0_takeover_raid1(struct mddev *mddev)
Add raid1->raid0 takeover support This patch introduces raid 1 to raid0 takeover operation in kernel space. Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: Neil Brown <neilb@nbeee.brown>
2011-01-31 10:47:13 +08:00
{
md/raid0: typedef removal: raid0_conf_t -> struct r0conf Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:48:59 +08:00
struct r0conf *priv_conf;
md: Avoid OOPS when reshaping raid1 to raid0 raid1 arrays do not have the notion of chunk size. Calculate the largest chunk sector size we can use to avoid a divide by zero OOPS when aligning the size of the new array to the chunk size. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-01 21:48:38 +08:00
int chunksect;
Add raid1->raid0 takeover support This patch introduces raid 1 to raid0 takeover operation in kernel space. Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: Neil Brown <neilb@nbeee.brown>
2011-01-31 10:47:13 +08:00
/* Check layout:
* - (N - 1) mirror drives must be already faulty
*/
if ((mddev->raid_disks - 1) != mddev->degraded) {
md/raid0: replace printk() with pr_*() This makes md/raid0 much less verbose as the messages about the array geometry are now pr_debug() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 11:16:50 +08:00
pr_err("md/raid0:%s: (N - 1) mirrors drives must be already faulty!\n",
Add raid1->raid0 takeover support This patch introduces raid 1 to raid0 takeover operation in kernel space. Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: Neil Brown <neilb@nbeee.brown>
2011-01-31 10:47:13 +08:00
mdname(mddev));
return ERR_PTR(-EINVAL);
}
md: Avoid OOPS when reshaping raid1 to raid0 raid1 arrays do not have the notion of chunk size. Calculate the largest chunk sector size we can use to avoid a divide by zero OOPS when aligning the size of the new array to the chunk size. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-01 21:48:38 +08:00
/*
* a raid1 doesn't have the notion of chunk size, so
* figure out the largest suitable size we can use.
*/
chunksect = 64 * 2; /* 64K by default */
/* The array must be an exact multiple of chunksize */
while (chunksect && (mddev->array_sectors & (chunksect - 1)))
chunksect >>= 1;
if ((chunksect << 9) < PAGE_SIZE)
/* array size does not allow a suitable chunk size */
return ERR_PTR(-EINVAL);
Add raid1->raid0 takeover support This patch introduces raid 1 to raid0 takeover operation in kernel space. Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: Neil Brown <neilb@nbeee.brown>
2011-01-31 10:47:13 +08:00
/* Set new parameters */
mddev->new_level = 0;
mddev->new_layout = 0;
md: Avoid OOPS when reshaping raid1 to raid0 raid1 arrays do not have the notion of chunk size. Calculate the largest chunk sector size we can use to avoid a divide by zero OOPS when aligning the size of the new array to the chunk size. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-01 21:48:38 +08:00
mddev->new_chunk_sectors = chunksect;
mddev->chunk_sectors = chunksect;
Add raid1->raid0 takeover support This patch introduces raid 1 to raid0 takeover operation in kernel space. Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: Neil Brown <neilb@nbeee.brown>
2011-01-31 10:47:13 +08:00
mddev->delta_disks = 1 - mddev->raid_disks;
md: Fix raid1->raid0 takeover Takeover raid1->raid0 not succeded. Kernel message is shown: "md/raid0:md126: too few disks (1 of 2) - aborting!" Problem was that we weren't updating ->raid_disks for that takeover, unlike all the others. Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-02-14 07:01:41 +08:00
mddev->raid_disks = 1;
Add raid1->raid0 takeover support This patch introduces raid 1 to raid0 takeover operation in kernel space. Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: Neil Brown <neilb@nbeee.brown>
2011-01-31 10:47:13 +08:00
/* make sure it will be not marked as dirty */
mddev->recovery_cp = MaxSector;
md: cleanup mddev flag clear for takeover Commit 6995f0b (md: takeover should clear unrelated bits) clear unrelated bits, but it's quite fragile. To avoid error in the future, define a macro for unsupported mddev flags for each raid type and use it to clear unsupported mddev flags. This should be less error-prone. Suggested-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-01-05 08:10:19 +08:00
mddev_clear_unsupported_flags(mddev, UNSUPPORTED_MDDEV_FLAGS);
Add raid1->raid0 takeover support This patch introduces raid 1 to raid0 takeover operation in kernel space. Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: Neil Brown <neilb@nbeee.brown>
2011-01-31 10:47:13 +08:00
create_strip_zones(mddev, &priv_conf);
return priv_conf;
}
md: remove typedefs: mddev_t -> struct mddev Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:47:53 +08:00
static void *raid0_takeover(struct mddev *mddev)
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
{
/* raid0 can take over:
md: enable raid4->raid0 takeover Only level 5 with layout=PARITY_N can be taken over to raid0 now. Lets allow level 4 either. Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-16 18:56:12 +08:00
* raid4 - if all data disks are active.
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
* raid5 - providing it is Raid4 layout and one disk is faulty
* raid10 - assuming we have all necessary active disks
Add raid1->raid0 takeover support This patch introduces raid 1 to raid0 takeover operation in kernel space. Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: Neil Brown <neilb@nbeee.brown>
2011-01-31 10:47:13 +08:00
* raid1 - with (N -1) mirror drives faulty
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
*/
md/raid0: check for bitmap compatability when changing raid levels. If an array has a bitmap, then it cannot be converted to raid0. Reported-by: Xiao Ni <xni@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2014-08-06 14:34:27 +08:00
if (mddev->bitmap) {
md/raid0: replace printk() with pr_*() This makes md/raid0 much less verbose as the messages about the array geometry are now pr_debug() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 11:16:50 +08:00
pr_warn("md/raid0: %s: cannot takeover array with bitmap\n",
mdname(mddev));
md/raid0: check for bitmap compatability when changing raid levels. If an array has a bitmap, then it cannot be converted to raid0. Reported-by: Xiao Ni <xni@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2014-08-06 14:34:27 +08:00
return ERR_PTR(-EBUSY);
}
md: enable raid4->raid0 takeover Only level 5 with layout=PARITY_N can be taken over to raid0 now. Lets allow level 4 either. Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-16 18:56:12 +08:00
if (mddev->level == 4)
return raid0_takeover_raid45(mddev);
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
if (mddev->level == 5) {
if (mddev->layout == ALGORITHM_PARITY_N)
md: enable raid4->raid0 takeover Only level 5 with layout=PARITY_N can be taken over to raid0 now. Lets allow level 4 either. Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-16 18:56:12 +08:00
return raid0_takeover_raid45(mddev);
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
md/raid0: replace printk() with pr_*() This makes md/raid0 much less verbose as the messages about the array geometry are now pr_debug() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 11:16:50 +08:00
pr_warn("md/raid0:%s: Raid can only takeover Raid5 with layout: %d\n",
mdname(mddev), ALGORITHM_PARITY_N);
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
}
if (mddev->level == 10)
return raid0_takeover_raid10(mddev);
Add raid1->raid0 takeover support This patch introduces raid 1 to raid0 takeover operation in kernel space. Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: Neil Brown <neilb@nbeee.brown>
2011-01-31 10:47:13 +08:00
if (mddev->level == 1)
return raid0_takeover_raid1(mddev);
md/raid0: replace printk() with pr_*() This makes md/raid0 much less verbose as the messages about the array geometry are now pr_debug() Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-11-02 11:16:50 +08:00
pr_warn("Takeover from raid%i to raid0 not supported\n",
Add raid1->raid0 takeover support This patch introduces raid 1 to raid0 takeover operation in kernel space. Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: Neil Brown <neilb@nbeee.brown>
2011-01-31 10:47:13 +08:00
mddev->level);
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
return ERR_PTR(-EINVAL);
}
md: remove special meaning of ->quiesce(.., 2) The '2' argument means "wake up anything that is waiting". This is an inelegant part of the design and was added to help support management of suspend_lo/suspend_hi setting. Now that suspend_lo/hi is managed in mddev_suspend/resume, that need is gone. These is still a couple of places where we call 'quiesce' with an argument of '2', but they can safely be changed to call ->quiesce(.., 1); ->quiesce(.., 0) which achieve the same result at the small cost of pausing IO briefly. This removes a small "optimization" from suspend_{hi,lo}_store, but it isn't clear that optimization served a useful purpose. The code now is a lot clearer. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-19 09:49:15 +08:00
static void raid0_quiesce(struct mddev *mddev, int quiesce)
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
{
}
md: rename "mdk_personality" to "md_personality" "mdk" doesn't mean anything any more. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11 13:49:58 +08:00
static struct md_personality raid0_personality=
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
.name = "raid0",
[PATCH] md: remove personality numbering from md md supports multiple different RAID level, each being implemented by a 'personality' (which is often in a separate module). These personalities have fairly artificial 'numbers'. The numbers are use to: 1- provide an index into an array where the various personalities are recorded 2- identify the module (via an alias) which implements are particular personality. Neither of these uses really justify the existence of personality numbers. The array can be replaced by a linked list which is searched (array lookup only happens very rarely). Module identification can be done using an alias based on level rather than 'personality' number. The current 'raid5' modules support two level (4 and 5) but only one personality. This slight awkwardness (which was handled in the mapping from level to personality) can be better handled by allowing raid5 to register 2 personalities. With this change in place, the core md module does not need to have an exhaustive list of all possible personalities, so other personalities can be added independently. This patch also moves the check for chunksize being non-zero into the ->run routines for the personalities that need it, rather than having it in core-md. This has a side effect of allowing 'faulty' and 'linear' not to have a chunk-size set. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:20:36 +08:00
.level = 0,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.owner = THIS_MODULE,
.make_request = raid0_make_request,
.run = raid0_run,
md: rename ->stop to ->free Now that the ->stop function only frees the private data, rename is accordingly. Also pass in the private pointer as an arg rather than using mddev->private. This flexibility will be useful in level_store(). Finally, don't clear ->private. It doesn't make sense to clear it seeing that isn't what we free, and it is no longer necessary to clear ->private (it was some time ago before ->to_remove was introduced). Setting ->to_remove in ->free() is a bit of a wart, but not a big problem at the moment. Signed-off-by: NeilBrown <neilb@suse.de>
2014-12-15 09:56:58 +08:00
.free = raid0_free,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.status = raid0_status,
md: add 'size' as a personality method In preparation for giving userspace control over ->array_sectors we need to be able to retrieve the 'default' size, and the 'anticipated' size when a reshape is requested. For personalities that do not reshape emit a warning if anything but the default size is requested. In the raid5 case we need to update ->previous_raid_disks to make the new 'default' size available. Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-18 09:10:40 +08:00
.size = raid0_size,
md: Add support for Raid5->Raid0 and Raid10->Raid0 takeover Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-08 13:02:44 +08:00
.takeover = raid0_takeover,
.quiesce = raid0_quiesce,
md: make ->congested robust against personality changes. There is currently no locking around calls to the 'congested' bdi function. If called at an awkward time while an array is being converted from one level (or personality) to another, there is a tiny chance of running code in an unreferenced module etc. So add a 'congested' function to the md_personality operations structure, and call it with appropriate locking from a central 'mddev_congested'. When the array personality is changing the array will be 'suspended' so no IO is processed. If mddev_congested detects this, it simply reports that the array is congested, which is a safe guess. As mddev_suspend calls synchronize_rcu(), mddev_congested can avoid races by included the whole call inside an rcu_read_lock() region. This require that the congested functions for all subordinate devices can be run under rcu_lock. Fortunately this is the case. Signed-off-by: NeilBrown <neilb@suse.de>
2014-12-15 09:56:56 +08:00
.congested = raid0_congested,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
static int __init raid0_init (void)
{
[PATCH] md: remove personality numbering from md md supports multiple different RAID level, each being implemented by a 'personality' (which is often in a separate module). These personalities have fairly artificial 'numbers'. The numbers are use to: 1- provide an index into an array where the various personalities are recorded 2- identify the module (via an alias) which implements are particular personality. Neither of these uses really justify the existence of personality numbers. The array can be replaced by a linked list which is searched (array lookup only happens very rarely). Module identification can be done using an alias based on level rather than 'personality' number. The current 'raid5' modules support two level (4 and 5) but only one personality. This slight awkwardness (which was handled in the mapping from level to personality) can be better handled by allowing raid5 to register 2 personalities. With this change in place, the core md module does not need to have an exhaustive list of all possible personalities, so other personalities can be added independently. This patch also moves the check for chunksize being non-zero into the ->run routines for the personalities that need it, rather than having it in core-md. This has a side effect of allowing 'faulty' and 'linear' not to have a chunk-size set. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:20:36 +08:00
return register_md_personality (&raid0_personality);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static void raid0_exit (void)
{
[PATCH] md: remove personality numbering from md md supports multiple different RAID level, each being implemented by a 'personality' (which is often in a separate module). These personalities have fairly artificial 'numbers'. The numbers are use to: 1- provide an index into an array where the various personalities are recorded 2- identify the module (via an alias) which implements are particular personality. Neither of these uses really justify the existence of personality numbers. The array can be replaced by a linked list which is searched (array lookup only happens very rarely). Module identification can be done using an alias based on level rather than 'personality' number. The current 'raid5' modules support two level (4 and 5) but only one personality. This slight awkwardness (which was handled in the mapping from level to personality) can be better handled by allowing raid5 to register 2 personalities. With this change in place, the core md module does not need to have an exhaustive list of all possible personalities, so other personalities can be added independently. This patch also moves the check for chunksize being non-zero into the ->run routines for the personalities that need it, rather than having it in core-md. This has a side effect of allowing 'faulty' and 'linear' not to have a chunk-size set. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:20:36 +08:00
unregister_md_personality (&raid0_personality);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
module_init(raid0_init);
module_exit(raid0_exit);
MODULE_LICENSE("GPL");
md: add MODULE_DESCRIPTION for all md related modules. Suggested by Oren Held <orenhe@il.ibm.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14 09:49:58 +08:00
MODULE_DESCRIPTION("RAID0 (striping) personality for MD");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
MODULE_ALIAS("md-personality-2"); /* RAID0 */
[PATCH] md: allow array level to be set textually via sysfs Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:20:51 +08:00
MODULE_ALIAS("md-raid0");
[PATCH] md: remove personality numbering from md md supports multiple different RAID level, each being implemented by a 'personality' (which is often in a separate module). These personalities have fairly artificial 'numbers'. The numbers are use to: 1- provide an index into an array where the various personalities are recorded 2- identify the module (via an alias) which implements are particular personality. Neither of these uses really justify the existence of personality numbers. The array can be replaced by a linked list which is searched (array lookup only happens very rarely). Module identification can be done using an alias based on level rather than 'personality' number. The current 'raid5' modules support two level (4 and 5) but only one personality. This slight awkwardness (which was handled in the mapping from level to personality) can be better handled by allowing raid5 to register 2 personalities. With this change in place, the core md module does not need to have an exhaustive list of all possible personalities, so other personalities can be added independently. This patch also moves the check for chunksize being non-zero into the ->run routines for the personalities that need it, rather than having it in core-md. This has a side effect of allowing 'faulty' and 'linear' not to have a chunk-size set. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 16:20:36 +08:00
MODULE_ALIAS("md-level-0");
Copy Permalink