kernel_optimize_test/net/tipc/core.c

170 lines
4.4 KiB
C
Raw Normal View History

/*
* net/tipc/core.c: TIPC module code
*
tipc: remove 'links' list from tipc_bearer struct In our ongoing effort to simplify the TIPC locking structure, we see a need to remove the linked list for tipc_links in the bearer. This can be explained as follows. Currently, we have three different ways to access a link, via three different lists/tables: 1: Via a node hash table: Used by the time-critical outgoing/incoming data paths. (e.g. link_send_sections_fast() and tipc_recv_msg() ): grab net_lock(read) find node from node hash table grab node_lock select link grab bearer_lock send_msg() release bearer_lock release node lock release net_lock 2: Via a global linked list for nodes: Used by configuration commands (link_cmd_set_value()) grab net_lock(read) find node and link from global node list (using link name) grab node_lock update link release node lock release net_lock (Same locking order as above. No problem.) 3: Via the bearer's linked link list: Used by notifications from interface (e.g. tipc_disable_bearer() ) grab net_lock(write) grab bearer_lock get link ptr from bearer's link list get node from link grab node_lock delete link release node lock release bearer_lock release net_lock (Different order from above, but works because we grab the outer net_lock in write mode first, excluding all other access.) The first major goal in our simplification effort is to get rid of the "big" net_lock, replacing it with rcu-locks when accessing the node list and node hash array. This will come in a later patch series. But to get there we first need to rewrite access methods ##2 and 3, since removal of net_lock would introduce three major problems: a) In access method #2, we access the link before taking the protecting node_lock. This will not work once net_lock is gone, so we will have to change the access order. We will deal with this in a later commit in this series, "tipc: add node lock protection to link found by link_find_link()". b) When the outer protection from net_lock is gone, taking bearer_lock and node_lock in opposite order of method 1) and 2) will become an obvious deadlock hazard. This is fixed in the commit ("tipc: remove bearer_lock from tipc_bearer struct") later in this series. c) Similar to what is described in problem a), access method #3 starts with using a link pointer that is unprotected by node_lock, in order to via that pointer find the correct node struct and lock it. Before we remove net_lock, this access order must be altered. This is what we do with this commit. We can avoid introducing problem problem c) by even here using the global node list to find the node, before accessing its links. When we loop though the node list we use the own bearer identity as search criteria, thus easily finding the links that are associated to the resetting/disabling bearer. It should be noted that although this method is somewhat slower than the current list traversal, it is in no way time critical. This is only about resetting or deleting links, something that must be considered relatively infrequent events. As a bonus, we can get rid of the mutual pointers between links and bearers. After this commit, pointer dependency go in one direction only: from the link to the bearer. This commit pre-empts introduction of problem c) as described above. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14 06:29:09 +08:00
* Copyright (c) 2003-2006, 2013, Ericsson AB
tipc: convert topology server to use new server facility As the new TIPC server infrastructure has been introduced, we can now convert the TIPC topology server to it. We get two benefits from doing this: 1) It simplifies the topology server locking policy. In the original locking policy, we placed one spin lock pointer in the tipc_subscriber structure to reuse the lock of the subscriber's server port, controlling access to members of tipc_subscriber instance. That is, we only used one lock to ensure both tipc_port and tipc_subscriber members were safely accessed. Now we introduce another spin lock for tipc_subscriber structure only protecting themselves, to get a finer granularity locking policy. Moreover, the change will allow us to make the topology server code more readable and maintainable. 2) It fixes a bug where sent subscription events may be lost when the topology port is congested. Using the new service, the topology server now queues sent events into an outgoing buffer, and then wakes up a sender process which has been blocked in workqueue context. The process will keep picking events from the buffer and send them to their respective subscribers, using the kernel socket interface, until the buffer is empty. Even if the socket is congested during transmission there is no risk that events may be dropped, since the sender process may block when needed. Some minor reordering of initialization is done, since we now have a scenario where the topology server must be started after socket initialization has taken place, as the former depends on the latter. And overall, we see a simplification of the TIPC subscriber code in making this changeover. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17 22:54:40 +08:00
* Copyright (c) 2005-2006, 2010-2013, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
tipc: convert tipc reference table to use generic rhashtable As tipc reference table is statically allocated, its memory size requested on stack initialization stage is quite big even if the maximum port number is just restricted to 8191 currently, however, the number already becomes insufficient in practice. But if the maximum ports is allowed to its theory value - 2^32, its consumed memory size will reach a ridiculously unacceptable value. Apart from this, heavy tipc users spend a considerable amount of time in tipc_sk_get() due to the read-lock on ref_table_lock. If tipc reference table is converted with generic rhashtable, above mentioned both disadvantages would be resolved respectively: making use of the new resizable hash table can avoid locking on the lookup; smaller memory size is required at initial stage, for example, 256 hash bucket slots are requested at the beginning phase instead of allocating the entire 8191 slots in old mode. The hash table will grow if entries exceeds 75% of table size up to a total table size of 1M, and it will automatically shrink if usage falls below 30%, but the minimum table size is allowed down to 256. Also converts ref_table_lock to a separate mutex to protect hash table mutations on write side. Lastly defers the release of the socket reference using call_rcu() to allow using an RCU read-side protected call to rhashtable_lookup(). Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Erik Hugne <erik.hugne@ericsson.com> Cc: Thomas Graf <tgraf@suug.ch> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-07 13:41:58 +08:00
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include "core.h"
#include "name_table.h"
#include "subscr.h"
#include "bearer.h"
#include "net.h"
#include "socket.h"
#include <linux/module.h>
/* configurable TIPC parameters */
int tipc_net_id __read_mostly;
int sysctl_tipc_rmem[3] __read_mostly; /* min/default/max */
static int __net_init tipc_init_net(struct net *net)
{
struct tipc_net *tn = net_generic(net, tipc_net_id);
int err;
tn->net_id = 4711;
tn->own_addr = 0;
get_random_bytes(&tn->random, sizeof(int));
INIT_LIST_HEAD(&tn->node_list);
spin_lock_init(&tn->node_list_lock);
err = tipc_sk_rht_init(net);
if (err)
goto out_sk_rht;
err = tipc_nametbl_init(net);
if (err)
goto out_nametbl;
err = tipc_subscr_start(net);
if (err)
goto out_subscr;
return 0;
out_subscr:
tipc_nametbl_stop(net);
out_nametbl:
tipc_sk_rht_destroy(net);
out_sk_rht:
return err;
}
static void __net_exit tipc_exit_net(struct net *net)
{
tipc_subscr_stop(net);
tipc_net_stop(net);
tipc_nametbl_stop(net);
tipc_sk_rht_destroy(net);
}
static struct pernet_operations tipc_net_ops = {
.init = tipc_init_net,
.exit = tipc_exit_net,
.id = &tipc_net_id,
.size = sizeof(struct tipc_net),
};
static int __init tipc_init(void)
{
int err;
pr_info("Activated (version " TIPC_MOD_VER ")\n");
sysctl_tipc_rmem[0] = TIPC_CONN_OVERLOAD_LIMIT >> 4 <<
TIPC_LOW_IMPORTANCE;
sysctl_tipc_rmem[1] = TIPC_CONN_OVERLOAD_LIMIT >> 4 <<
TIPC_CRITICAL_IMPORTANCE;
sysctl_tipc_rmem[2] = TIPC_CONN_OVERLOAD_LIMIT;
err = tipc_netlink_start();
if (err)
goto out_netlink;
err = tipc_netlink_compat_start();
if (err)
goto out_netlink_compat;
err = tipc_socket_init();
if (err)
goto out_socket;
err = tipc_register_sysctl();
if (err)
goto out_sysctl;
err = register_pernet_subsys(&tipc_net_ops);
if (err)
goto out_pernet;
err = tipc_bearer_setup();
if (err)
goto out_bearer;
pr_info("Started in single node mode\n");
return 0;
out_bearer:
unregister_pernet_subsys(&tipc_net_ops);
out_pernet:
tipc_unregister_sysctl();
out_sysctl:
tipc_socket_stop();
out_socket:
tipc_netlink_compat_stop();
out_netlink_compat:
tipc_netlink_stop();
out_netlink:
pr_err("Unable to start in single node mode\n");
return err;
}
static void __exit tipc_exit(void)
{
tipc_bearer_cleanup();
unregister_pernet_subsys(&tipc_net_ops);
tipc_netlink_stop();
tipc_netlink_compat_stop();
tipc_socket_stop();
tipc_unregister_sysctl();
pr_info("Deactivated\n");
}
module_init(tipc_init);
module_exit(tipc_exit);
MODULE_DESCRIPTION("TIPC: Transparent Inter Process Communication");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION(TIPC_MOD_VER);