AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
6206f0e180
kernel_optimize_test/fs/btrfs/dev-replace.h

23 lines
835 B
C
Raw Normal View History

btrfs: replace GPL boilerplate by SPDX -- headers Remove GPL boilerplate text (long, short, one-line) and keep the rest, ie. personal, company or original source copyright statements. Add the SPDX header. Unify the include protection macros to match the file names. Signed-off-by: David Sterba <dsterba@suse.com>
2018-04-04 01:16:55 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 18:43:11 +08:00
/*
* Copyright (C) STRATO AG 2012. All rights reserved.
*/
btrfs: replace GPL boilerplate by SPDX -- headers Remove GPL boilerplate text (long, short, one-line) and keep the rest, ie. personal, company or original source copyright statements. Add the SPDX header. Unify the include protection macros to match the file names. Signed-off-by: David Sterba <dsterba@suse.com>
2018-04-04 01:16:55 +08:00
#ifndef BTRFS_DEV_REPLACE_H
#define BTRFS_DEV_REPLACE_H
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 18:43:11 +08:00
Btrfs: add new sources for device replace code This adds a new file to the sources together with the header file and the changes to ioctl.h and ctree.h that are required by the new C source file. Additionally, 4 new functions are added to volume.c that deal with device creation and destruction. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 00:33:06 +08:00
struct btrfs_ioctl_dev_replace_args;
int btrfs_init_dev_replace(struct btrfs_fs_info *fs_info);
btrfs: get fs_info from trans in btrfs_run_dev_replace We can read fs_info from the transaction and can drop it from the parameters. Signed-off-by: David Sterba <dsterba@suse.com>
2019-03-20 23:51:44 +08:00
int btrfs_run_dev_replace(struct btrfs_trans_handle *trans);
btrfs: take an fs_info directly when the root is not used otherwise There are loads of functions in btrfs that accept a root parameter but only use it to obtain an fs_info pointer. Let's convert those to just accept an fs_info pointer directly. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-23 06:54:24 +08:00
int btrfs_dev_replace_by_ioctl(struct btrfs_fs_info *fs_info,
Btrfs: add new sources for device replace code This adds a new file to the sources together with the header file and the changes to ioctl.h and ctree.h that are required by the new C source file. Additionally, 4 new functions are added to volume.c that deal with device creation and destruction. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 00:33:06 +08:00
struct btrfs_ioctl_dev_replace_args *args);
void btrfs_dev_replace_status(struct btrfs_fs_info *fs_info,
struct btrfs_ioctl_dev_replace_args *args);
btrfs: btrfs_dev_replace_cancel() can return int Current u64 return from btrfs_dev_replace_cancel() was probably done to match the btrfs_ioctl_dev_replace_args::result. However as our actual return value fits in int, and it further gets typecast to u64, so just return int. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-02-12 23:33:31 +08:00
int btrfs_dev_replace_cancel(struct btrfs_fs_info *fs_info);
Btrfs: add new sources for device replace code This adds a new file to the sources together with the header file and the changes to ioctl.h and ctree.h that are required by the new C source file. Additionally, 4 new functions are added to volume.c that deal with device creation and destruction. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 00:33:06 +08:00
void btrfs_dev_replace_suspend_for_unmount(struct btrfs_fs_info *fs_info);
int btrfs_resume_dev_replace_async(struct btrfs_fs_info *fs_info);
btrfs: add __pure attribute to functions The attribute is more relaxed than const and the functions could dereference pointers, as long as the observable state is not changed. We do have such functions, based on -Wsuggest-attribute=pure . The visible effects of this patch are negligible, there are differences in the assembly but hard to summarize. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-10-02 01:57:39 +08:00
int __pure btrfs_dev_replace_is_ongoing(struct btrfs_dev_replace *dev_replace);
Btrfs: add new sources for device replace code This adds a new file to the sources together with the header file and the changes to ioctl.h and ctree.h that are required by the new C source file. Additionally, 4 new functions are added to volume.c that deal with device creation and destruction. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 00:33:06 +08:00
Btrfs: add code to scrub to copy read data to another disk The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit adds code to scrub to allow the scrub code to copy read data to another disk. One goal is to be able to perform as fast as possible. Therefore the write requests are collected until huge bios are built, and the write process is decoupled from the read process with some kind of flow control, of course, in order to limit the allocated memory. The best performance on spinning disks could by reached when the head movements are avoided as much as possible. Therefore a single worker is used to interface the read process with the write process. The regular scrub operation works as fast as before, it is not negatively influenced and actually it is more or less unchanged. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-06 18:43:11 +08:00
#endif
Copy Permalink