kernel_optimize_test/kernel/bpf/Makefile

obj-y := core.o

obj-$(CONFIG_BPF_SYSCALL) += syscall.o verifier.o inode.o helpers.o
obj-$(CONFIG_BPF_SYSCALL) += hashtab.o arraymap.o percpu_freelist.o bpf_lru_list.o
ifeq ($(CONFIG_PERF_EVENTS),y)
obj-$(CONFIG_BPF_SYSCALL) += stackmap.o
endif
obj-$(CONFIG_CGROUP_BPF) += cgroup.o
bpf: split eBPF out of NET introduce two configs: - hidden CONFIG_BPF to select eBPF interpreter that classic socket filters depend on - visible CONFIG_BPF_SYSCALL (default off) that tracing and sockets can use that solves several problems: - tracing and others that wish to use eBPF don't need to depend on NET. They can use BPF_SYSCALL to allow loading from userspace or select BPF to use it directly from kernel in NET-less configs. - in 3.18 programs cannot be attached to events yet, so don't force it on - when the rest of eBPF infra is there in 3.19+, it's still useful to switch it off to minimize kernel size bloat-o-meter on x64 shows: add/remove: 0/60 grow/shrink: 0/2 up/down: 0/-15601 (-15601) tested with many different config combinations. Hopefully didn't miss anything. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2014-10-24 09:41:08 +08:00			`obj-y := core.o`
bpf: add support for persistent maps/progs This work adds support for "persistent" eBPF maps/programs. The term "persistent" is to be understood that maps/programs have a facility that lets them survive process termination. This is desired by various eBPF subsystem users. Just to name one example: tc classifier/action. Whenever tc parses the ELF object, extracts and loads maps/progs into the kernel, these file descriptors will be out of reach after the tc instance exits. So a subsequent tc invocation won't be able to access/relocate on this resource, and therefore maps cannot easily be shared, f.e. between the ingress and egress networking data path. The current workaround is that Unix domain sockets (UDS) need to be instrumented in order to pass the created eBPF map/program file descriptors to a third party management daemon through UDS' socket passing facility. This makes it a bit complicated to deploy shared eBPF maps or programs (programs f.e. for tail calls) among various processes. We've been brainstorming on how we could tackle this issue and various approches have been tried out so far, which can be read up further in the below reference. The architecture we eventually ended up with is a minimal file system that can hold map/prog objects. The file system is a per mount namespace singleton, and the default mount point is /sys/fs/bpf/. Any subsequent mounts within a given namespace will point to the same instance. The file system allows for creating a user-defined directory structure. The objects for maps/progs are created/fetched through bpf(2) with two new commands (BPF_OBJ_PIN/BPF_OBJ_GET). I.e. a bpf file descriptor along with a pathname is being passed to bpf(2) that in turn creates (we call it eBPF object pinning) the file system nodes. Only the pathname is being passed to bpf(2) for getting a new BPF file descriptor to an existing node. The user can use that to access maps and progs later on, through bpf(2). Removal of file system nodes is being managed through normal VFS functions such as unlink(2), etc. The file system code is kept to a very minimum and can be further extended later on. The next step I'm working on is to add dump eBPF map/prog commands to bpf(2), so that a specification from a given file descriptor can be retrieved. This can be used by things like CRIU but also applications can inspect the meta data after calling BPF_OBJ_GET. Big thanks also to Alexei and Hannes who significantly contributed in the design discussion that eventually let us end up with this architecture here. Reference: https://lkml.org/lkml/2015/10/15/925 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2015-10-29 21:58:09 +08:00
			`obj-$(CONFIG_BPF_SYSCALL) += syscall.o verifier.o inode.o helpers.o`
bpf: LRU List Introduce bpf_lru_list which will provide LRU capability to the bpf_htab in the later patch. * General Thoughts: 1. Target use case. Read is more often than update. (i.e. bpf_lookup_elem() is more often than bpf_update_elem()). If bpf_prog does a bpf_lookup_elem() first and then an in-place update, it still counts as a read operation to the LRU list concern. 2. It may be useful to think of it as a LRU cache 3. Optimize the read case 3.1 No lock in read case 3.2 The LRU maintenance is only done during bpf_update_elem() 4. If there is a percpu LRU list, it will lose the system-wise LRU property. A completely isolated percpu LRU list has the best performance but the memory utilization is not ideal considering the work load may be imbalance. 5. Hence, this patch starts the LRU implementation with a global LRU list with batched operations before accessing the global LRU list. As a LRU cache, #read >> #update/#insert operations, it will work well. 6. There is a local list (for each cpu) which is named 'struct bpf_lru_locallist'. This local list is not used to sort the LRU property. Instead, the local list is to batch enough operations before acquiring the lock of the global LRU list. More details on this later. 7. In the later patch, it allows a percpu LRU list by specifying a map-attribute for scalability reason and for use cases that need to prepare for the worst (and pathological) case like DoS attack. The percpu LRU list is completely isolated from each other and the LRU nodes (including free nodes) cannot be moved across the list. The following description is for the global LRU list but mostly applicable to the percpu LRU list also. * Global LRU List: 1. It has three sub-lists: active-list, inactive-list and free-list. 2. The two list idea, active and inactive, is borrowed from the page cache. 3. All nodes are pre-allocated and all sit at the free-list (of the global LRU list) at the beginning. The pre-allocation reasoning is similar to the existing BPF_MAP_TYPE_HASH. However, opting-out prealloc (BPF_F_NO_PREALLOC) is not supported in the LRU map. * Active/Inactive List (of the global LRU list): 1. The active list, as its name says it, maintains the active set of the nodes. We can think of it as the working set or more frequently accessed nodes. The access frequency is approximated by a ref-bit. The ref-bit is set during the bpf_lookup_elem(). 2. The inactive list, as its name also says it, maintains a less active set of nodes. They are the candidates to be removed from the bpf_htab when we are running out of free nodes. 3. The ordering of these two lists is acting as a rough clock. The tail of the inactive list is the older nodes and should be released first if the bpf_htab needs free element. * Rotating the Active/Inactive List (of the global LRU list): 1. It is the basic operation to maintain the LRU property of the global list. 2. The active list is only rotated when the inactive list is running low. This idea is similar to the current page cache. Inactive running low is currently defined as "# of inactive < # of active". 3. The active list rotation always starts from the tail. It moves node without ref-bit set to the head of the inactive list. It moves node with ref-bit set back to the head of the active list and then clears its ref-bit. 4. The inactive rotation is pretty simply. It walks the inactive list and moves the nodes back to the head of active list if its ref-bit is set. The ref-bit is cleared after moving to the active list. If the node does not have ref-bit set, it just leave it as it is because it is already in the inactive list. * Shrinking the Inactive List (of the global LRU list): 1. Shrinking is the operation to get free nodes when the bpf_htab is full. 2. It usually only shrinks the inactive list to get free nodes. 3. During shrinking, it will walk the inactive list from the tail, delete the nodes without ref-bit set from bpf_htab. 4. If no free node found after step (3), it will forcefully get one node from the tail of inactive or active list. Forcefully is in the sense that it ignores the ref-bit. * Local List: 1. Each CPU has a 'struct bpf_lru_locallist'. The purpose is to batch enough operations before acquiring the lock of the global LRU. 2. A local list has two sub-lists, free-list and pending-list. 3. During bpf_update_elem(), it will try to get from the free-list of (the current CPU local list). 4. If the local free-list is empty, it will acquire from the global LRU list. The global LRU list can either satisfy it by its global free-list or by shrinking the global inactive list. Since we have acquired the global LRU list lock, it will try to get at most LOCAL_FREE_TARGET elements to the local free list. 5. When a new element is added to the bpf_htab, it will first sit at the pending-list (of the local list) first. The pending-list will be flushed to the global LRU list when it needs to acquire free nodes from the global list next time. * Lock Consideration: The LRU list has a lock (lru_lock). Each bucket of htab has a lock (buck_lock). If both locks need to be acquired together, the lock order is always lru_lock -> buck_lock and this only happens in the bpf_lru_list.c logic. In hashtab.c, both locks are not acquired together (i.e. one lock is always released first before acquiring another lock). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-11-12 02:55:06 +08:00			`obj-$(CONFIG_BPF_SYSCALL) += hashtab.o arraymap.o percpu_freelist.o bpf_lru_list.o`
bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-02-18 11:58:58 +08:00			`ifeq ($(CONFIG_PERF_EVENTS),y)`
			`obj-$(CONFIG_BPF_SYSCALL) += stackmap.o`
			`endif`
cgroup: add support for eBPF programs This patch adds two sets of eBPF program pointers to struct cgroup. One for such that are directly pinned to a cgroup, and one for such that are effective for it. To illustrate the logic behind that, assume the following example cgroup hierarchy. A - B - C \ D - E If only B has a program attached, it will be effective for B, C, D and E. If D then attaches a program itself, that will be effective for both D and E, and the program in B will only affect B and C. Only one program of a given type is effective for a cgroup. Attaching and detaching programs will be done through the bpf(2) syscall. For now, ingress and egress inet socket filtering are the only supported use-cases. Signed-off-by: Daniel Mack <daniel@zonque.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2016-11-23 23:52:26 +08:00			`obj-$(CONFIG_CGROUP_BPF) += cgroup.o`