AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
87bbb19721
kernel_optimize_test/arch/arm/mach-mx3/Kconfig

49 lines
1.3 KiB
Plaintext
Raw Normal View History

[ARM] 4461/1: MXC platform and i.MX31ADS core support This patch adds the foundation pieces for the Freescale MXC platforms, including i.MX2 and i.MX3 based systems. The bare-bones MX31 support in this patch boots to the rootdev panic with 8250 serial console configured "console=ttyS0,115200". It assumes that Redboot is the boot loader. Signed-off-by: Quinn Jensen <quinn.jensen@freescale.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-10 05:06:53 +08:00
menu "MX3 Options"
depends on ARCH_MX3
config MACH_MX31ADS
bool "Support MX31ADS platforms"
default y
help
Include support for MX31ADS platform. This includes specific
configurations for the board and its peripherals.
mx31ads: Initial support for Wolfson Microelectronics 1133-EV1 module The i.MX31ADS supports pluggable PMU modules, including the WM835x based Wolfson Microelectronics 1133-EV1. These boards provide power, audio, RTC and watchdiog services to the system. This patch adds initial support for those boards in I2C mode. Currently support is limited by the available support for the features of the i.MX31 in the mainline kernel. Some further work will be needed once other PMU modules are supported and once there is SPI support. Many of the regulator constraints will be sharable with other PMU boards. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-16 00:14:30 +08:00
config MACH_MX31ADS_WM1133_EV1
bool "Support Wolfson Microelectronics 1133-EV1 module"
depends on MACH_MX31ADS
select MFD_WM8350_CONFIG_MODE_0
select MFD_WM8352_CONFIG_MODE_0
help
Include support for the Wolfson Microelectronics 1133-EV1 PMU
and audio module for the MX31ADS platform.
MX31: add basic pcm037 board support This patch adds basic board support for phytecs pmc037 board. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05 16:02:52 +08:00
config MACH_PCM037
bool "Support Phytec pcm037 platforms"
help
Include support for Phytec pcm037 platform. This includes
specific configurations for the board and its peripherals.
MX3: Add basic support for LogicPD i.MX31 LiteKit This patch adds basic support for i.MX31 LiteKit by LogicPD. With printascii() in kernel/printk.c, it boots right into the rootfs-panic. Note: This is a modified version of Daniel's patch to fit into this patch stack. > On 09.06.2008, at 17:26, Russell King - ARM Linux wrote: > > > I would much prefer it if board specific includes were included by the > > code which needs them rather than in asm/arch/hardware.h.  With the > > device model, drivers shouldn't need to include any board specific > > includes - only the board specific C file should need it. > > The new version of this patch (#5102) has been uploaded to the patch > tracker this morning. Signed-off-by: Daniel Mack <daniel@caiaq.de> -- arch/arm/configs/mx31litekit_defconfig | 1100 ++++++++++++++++++++++++++++++ arch/arm/mach-mx3/Kconfig | 7 arch/arm/mach-mx3/Makefile | 1 arch/arm/mach-mx3/mx31lite.c | 96 ++ include/asm-arm/arch-mxc/board-mx31lite.h | 38 + include/asm-arm/arch-mxc/debug-macro.S | 3 6 files changed, 1245 insertions(+)
2008-07-05 16:02:53 +08:00
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
default n
help
Include support for MX31 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
Add basic support for MX31PDK board. Add basic support to the MX31PDK development board, also known as MX31 3DS or MX31 3-stack board (http://www.freescale.com/imx31pdk). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: sascha Hauer <s.hauer@pengutronix.de>
2008-11-12 22:38:39 +08:00
config MACH_MX31_3DS
bool "Support MX31PDK (3DS)"
default n
help
Include support for MX31PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
[ARM] MX31: basic support for mx31moboard platform Initial support for mx31moboard platfor with 3 serial ports and NOR Flash Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-11-24 00:35:08 +08:00
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
default n
help
Include support for mx31moboard platform. This includes specific
configurations for the board and its peripherals.
[ARM] 4461/1: MXC platform and i.MX31ADS core support This patch adds the foundation pieces for the Freescale MXC platforms, including i.MX2 and i.MX3 based systems. The bare-bones MX31 support in this patch boots to the rootdev panic with 8250 serial console configured "console=ttyS0,115200". It assumes that Redboot is the boot loader. Signed-off-by: Quinn Jensen <quinn.jensen@freescale.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-10 05:06:53 +08:00
endmenu
Copy Permalink