AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
a929752c4b
kernel_optimize_test/include/linux/smc91x.h

26 lines
592 B
C
Raw Normal View History

smc91x: introduce platform data flags V2 This patch introduces struct smc91x_platdata and modifies the driver so bus width is checked during run time using SMC_nBIT() instead of SMC_CAN_USE_nBIT. V2 keeps static configuration lean using SMC_DYNAMIC_BUS_CONFIG. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-22 18:55:15 +08:00
#ifndef __SMC91X_H__
#define __SMC91X_H__
#define SMC91X_USE_8BIT (1 << 0)
#define SMC91X_USE_16BIT (1 << 1)
#define SMC91X_USE_32BIT (1 << 2)
[NET] smc91x: add SMC91X_NOWAIT flag to platform data And also favors the usage of SMC91X_NOWAIT over the hardcoded SMC_NOWAIT by converting "nowait" (module parameter overridable) to platform flag. There are several possibilities: 1. platform data present - preferred and use as is 2. platform data absent - use "nowait", it can be: a. SMC_NOWAIT if defined b. default to 0 if SMC_NOWAIT isn't defined c. overriden by module parameter Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-19 17:39:03 +08:00
#define SMC91X_NOWAIT (1 << 3)
[NET] smc91x: prepare for SMC_IO_SHIFT to be a platform configurable variable Now one can use the following code #define SMC_IO_SHIFT lp->io_shift to make SMC_IO_SHIFT a variable. This, however, will slightly increase the CPU overhead and have negative impact on the network performance. The tradeoff is, this can be specified in the smc91x platform data so that multiple boards support can be built in a single zImage. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-24 13:38:50 +08:00
/* two bits for IO_SHIFT, let's hope later designs will keep this sane */
#define SMC91X_IO_SHIFT_0 (0 << 4)
#define SMC91X_IO_SHIFT_1 (1 << 4)
#define SMC91X_IO_SHIFT_2 (2 << 4)
#define SMC91X_IO_SHIFT_3 (3 << 4)
#define SMC91X_IO_SHIFT(x) (((x) >> 4) & 0x3)
[NET] smc91x: prepare SMC_USE_PXA_DMA to be specified in platform data Now that the original SMC_USE_PXA_DMA specific code will always being built if CONFIG_ARCH_PXA is defined, so to make this part of the code to be PXA public, and still prevent it from being built if support of PXA is not selected. A SMC91X_USE_DMA flag is added to the platform data to allow platform to choose its usage of DMA. Note this flag itself is so named to be generic enough (assuming other platforms can also use DMA). It keeps backward compatibility to set the SMC91X_USE_DMA flag if SMC_USE_PXA_DMA is still defined. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-24 15:36:05 +08:00
#define SMC91X_USE_DMA (1 << 6)
smc91x: introduce platform data flags V2 This patch introduces struct smc91x_platdata and modifies the driver so bus width is checked during run time using SMC_nBIT() instead of SMC_CAN_USE_nBIT. V2 keeps static configuration lean using SMC_DYNAMIC_BUS_CONFIG. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-22 18:55:15 +08:00
struct smc91x_platdata {
unsigned long flags;
[NET] smc91x: provide configurable leds This patch provides a mechanism for platforms to be able to supply the LED configuration via platform data, rather than having to hard code it in smc91x.h. Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-05 04:13:37 +08:00
unsigned char leda;
unsigned char ledb;
smc91x: introduce platform data flags V2 This patch introduces struct smc91x_platdata and modifies the driver so bus width is checked during run time using SMC_nBIT() instead of SMC_CAN_USE_nBIT. V2 keeps static configuration lean using SMC_DYNAMIC_BUS_CONFIG. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-22 18:55:15 +08:00
};
#endif /* __SMC91X_H__ */
Copy Permalink