forked from luck/tmp_suning_uos_patched
1833 lines
44 KiB
C
1833 lines
44 KiB
C
|
/*
|
||
|
* drivers/serial/mpsc.c
|
||
|
*
|
||
|
* Generic driver for the MPSC (UART mode) on Marvell parts (e.g., GT64240,
|
||
|
* GT64260, MV64340, MV64360, GT96100, ... ).
|
||
|
*
|
||
|
* Author: Mark A. Greer <mgreer@mvista.com>
|
||
|
*
|
||
|
* Based on an old MPSC driver that was in the linuxppc tree. It appears to
|
||
|
* have been created by Chris Zankel (formerly of MontaVista) but there
|
||
|
* is no proper Copyright so I'm not sure. Apparently, parts were also
|
||
|
* taken from PPCBoot (now U-Boot). Also based on drivers/serial/8250.c
|
||
|
* by Russell King.
|
||
|
*
|
||
|
* 2004 (c) MontaVista, Software, Inc. This file is licensed under
|
||
|
* the terms of the GNU General Public License version 2. This program
|
||
|
* is licensed "as is" without any warranty of any kind, whether express
|
||
|
* or implied.
|
||
|
*/
|
||
|
/*
|
||
|
* The MPSC interface is much like a typical network controller's interface.
|
||
|
* That is, you set up separate rings of descriptors for transmitting and
|
||
|
* receiving data. There is also a pool of buffers with (one buffer per
|
||
|
* descriptor) that incoming data are dma'd into or outgoing data are dma'd
|
||
|
* out of.
|
||
|
*
|
||
|
* The MPSC requires two other controllers to be able to work. The Baud Rate
|
||
|
* Generator (BRG) provides a clock at programmable frequencies which determines
|
||
|
* the baud rate. The Serial DMA Controller (SDMA) takes incoming data from the
|
||
|
* MPSC and DMA's it into memory or DMA's outgoing data and passes it to the
|
||
|
* MPSC. It is actually the SDMA interrupt that the driver uses to keep the
|
||
|
* transmit and receive "engines" going (i.e., indicate data has been
|
||
|
* transmitted or received).
|
||
|
*
|
||
|
* NOTES:
|
||
|
*
|
||
|
* 1) Some chips have an erratum where several regs cannot be
|
||
|
* read. To work around that, we keep a local copy of those regs in
|
||
|
* 'mpsc_port_info'.
|
||
|
*
|
||
|
* 2) Some chips have an erratum where the ctlr will hang when the SDMA ctlr
|
||
|
* accesses system mem with coherency enabled. For that reason, the driver
|
||
|
* assumes that coherency for that ctlr has been disabled. This means
|
||
|
* that when in a cache coherent system, the driver has to manually manage
|
||
|
* the data cache on the areas that it touches because the dma_* macro are
|
||
|
* basically no-ops.
|
||
|
*
|
||
|
* 3) There is an erratum (on PPC) where you can't use the instruction to do
|
||
|
* a DMA_TO_DEVICE/cache clean so DMA_BIDIRECTIONAL/flushes are used in places
|
||
|
* where a DMA_TO_DEVICE/clean would have [otherwise] sufficed.
|
||
|
*
|
||
|
* 4) AFAICT, hardware flow control isn't supported by the controller --MAG.
|
||
|
*/
|
||
|
|
||
|
#include "mpsc.h"
|
||
|
|
||
|
/*
|
||
|
* Define how this driver is known to the outside (we've been assigned a
|
||
|
* range on the "Low-density serial ports" major).
|
||
|
*/
|
||
|
#define MPSC_MAJOR 204
|
||
|
#define MPSC_MINOR_START 44
|
||
|
#define MPSC_DRIVER_NAME "MPSC"
|
||
|
#define MPSC_DEVFS_NAME "ttymm/"
|
||
|
#define MPSC_DEV_NAME "ttyMM"
|
||
|
#define MPSC_VERSION "1.00"
|
||
|
|
||
|
static struct mpsc_port_info mpsc_ports[MPSC_NUM_CTLRS];
|
||
|
static struct mpsc_shared_regs mpsc_shared_regs;
|
||
|
|
||
|
/*
|
||
|
******************************************************************************
|
||
|
*
|
||
|
* Baud Rate Generator Routines (BRG)
|
||
|
*
|
||
|
******************************************************************************
|
||
|
*/
|
||
|
static void
|
||
|
mpsc_brg_init(struct mpsc_port_info *pi, u32 clk_src)
|
||
|
{
|
||
|
u32 v;
|
||
|
|
||
|
v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
|
||
|
v = (v & ~(0xf << 18)) | ((clk_src & 0xf) << 18);
|
||
|
|
||
|
if (pi->brg_can_tune)
|
||
|
v &= ~(1 << 25);
|
||
|
|
||
|
if (pi->mirror_regs)
|
||
|
pi->BRG_BCR_m = v;
|
||
|
writel(v, pi->brg_base + BRG_BCR);
|
||
|
|
||
|
writel(readl(pi->brg_base + BRG_BTR) & 0xffff0000,
|
||
|
pi->brg_base + BRG_BTR);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
mpsc_brg_enable(struct mpsc_port_info *pi)
|
||
|
{
|
||
|
u32 v;
|
||
|
|
||
|
v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
|
||
|
v |= (1 << 16);
|
||
|
|
||
|
if (pi->mirror_regs)
|
||
|
pi->BRG_BCR_m = v;
|
||
|
writel(v, pi->brg_base + BRG_BCR);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
mpsc_brg_disable(struct mpsc_port_info *pi)
|
||
|
{
|
||
|
u32 v;
|
||
|
|
||
|
v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
|
||
|
v &= ~(1 << 16);
|
||
|
|
||
|
if (pi->mirror_regs)
|
||
|
pi->BRG_BCR_m = v;
|
||
|
writel(v, pi->brg_base + BRG_BCR);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static inline void
|
||
|
mpsc_set_baudrate(struct mpsc_port_info *pi, u32 baud)
|
||
|
{
|
||
|
/*
|
||
|
* To set the baud, we adjust the CDV field in the BRG_BCR reg.
|
||
|
* From manual: Baud = clk / ((CDV+1)*2) ==> CDV = (clk / (baud*2)) - 1.
|
||
|
* However, the input clock is divided by 16 in the MPSC b/c of how
|
||
|
* 'MPSC_MMCRH' was set up so we have to divide the 'clk' used in our
|
||
|
* calculation by 16 to account for that. So the real calculation
|
||
|
* that accounts for the way the mpsc is set up is:
|
||
|
* CDV = (clk / (baud*2*16)) - 1 ==> CDV = (clk / (baud << 5)) - 1.
|
||
|
*/
|
||
|
u32 cdv = (pi->port.uartclk / (baud << 5)) - 1;
|
||
|
u32 v;
|
||
|
|
||
|
mpsc_brg_disable(pi);
|
||
|
v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
|
||
|
v = (v & 0xffff0000) | (cdv & 0xffff);
|
||
|
|
||
|
if (pi->mirror_regs)
|
||
|
pi->BRG_BCR_m = v;
|
||
|
writel(v, pi->brg_base + BRG_BCR);
|
||
|
mpsc_brg_enable(pi);
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
******************************************************************************
|
||
|
*
|
||
|
* Serial DMA Routines (SDMA)
|
||
|
*
|
||
|
******************************************************************************
|
||
|
*/
|
||
|
|
||
|
static void
|
||
|
mpsc_sdma_burstsize(struct mpsc_port_info *pi, u32 burst_size)
|
||
|
{
|
||
|
u32 v;
|
||
|
|
||
|
pr_debug("mpsc_sdma_burstsize[%d]: burst_size: %d\n",
|
||
|
pi->port.line, burst_size);
|
||
|
|
||
|
burst_size >>= 3; /* Divide by 8 b/c reg values are 8-byte chunks */
|
||
|
|
||
|
if (burst_size < 2)
|
||
|
v = 0x0; /* 1 64-bit word */
|
||
|
else if (burst_size < 4)
|
||
|
v = 0x1; /* 2 64-bit words */
|
||
|
else if (burst_size < 8)
|
||
|
v = 0x2; /* 4 64-bit words */
|
||
|
else
|
||
|
v = 0x3; /* 8 64-bit words */
|
||
|
|
||
|
writel((readl(pi->sdma_base + SDMA_SDC) & (0x3 << 12)) | (v << 12),
|
||
|
pi->sdma_base + SDMA_SDC);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
mpsc_sdma_init(struct mpsc_port_info *pi, u32 burst_size)
|
||
|
{
|
||
|
pr_debug("mpsc_sdma_init[%d]: burst_size: %d\n", pi->port.line,
|
||
|
burst_size);
|
||
|
|
||
|
writel((readl(pi->sdma_base + SDMA_SDC) & 0x3ff) | 0x03f,
|
||
|
pi->sdma_base + SDMA_SDC);
|
||
|
mpsc_sdma_burstsize(pi, burst_size);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static inline u32
|
||
|
mpsc_sdma_intr_mask(struct mpsc_port_info *pi, u32 mask)
|
||
|
{
|
||
|
u32 old, v;
|
||
|
|
||
|
pr_debug("mpsc_sdma_intr_mask[%d]: mask: 0x%x\n", pi->port.line, mask);
|
||
|
|
||
|
old = v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m :
|
||
|
readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
|
||
|
|
||
|
mask &= 0xf;
|
||
|
if (pi->port.line)
|
||
|
mask <<= 8;
|
||
|
v &= ~mask;
|
||
|
|
||
|
if (pi->mirror_regs)
|
||
|
pi->shared_regs->SDMA_INTR_MASK_m = v;
|
||
|
writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
|
||
|
|
||
|
if (pi->port.line)
|
||
|
old >>= 8;
|
||
|
return old & 0xf;
|
||
|
}
|
||
|
|
||
|
static inline void
|
||
|
mpsc_sdma_intr_unmask(struct mpsc_port_info *pi, u32 mask)
|
||
|
{
|
||
|
u32 v;
|
||
|
|
||
|
pr_debug("mpsc_sdma_intr_unmask[%d]: mask: 0x%x\n", pi->port.line,mask);
|
||
|
|
||
|
v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m :
|
||
|
readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
|
||
|
|
||
|
mask &= 0xf;
|
||
|
if (pi->port.line)
|
||
|
mask <<= 8;
|
||
|
v |= mask;
|
||
|
|
||
|
if (pi->mirror_regs)
|
||
|
pi->shared_regs->SDMA_INTR_MASK_m = v;
|
||
|
writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static inline void
|
||
|
mpsc_sdma_intr_ack(struct mpsc_port_info *pi)
|
||
|
{
|
||
|
pr_debug("mpsc_sdma_intr_ack[%d]: Acknowledging IRQ\n", pi->port.line);
|
||
|
|
||
|
if (pi->mirror_regs)
|
||
|
pi->shared_regs->SDMA_INTR_CAUSE_m = 0;
|
||
|
writel(0, pi->shared_regs->sdma_intr_base + SDMA_INTR_CAUSE);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static inline void
|
||
|
mpsc_sdma_set_rx_ring(struct mpsc_port_info *pi, struct mpsc_rx_desc *rxre_p)
|
||
|
{
|
||
|
pr_debug("mpsc_sdma_set_rx_ring[%d]: rxre_p: 0x%x\n",
|
||
|
pi->port.line, (u32) rxre_p);
|
||
|
|
||
|
writel((u32)rxre_p, pi->sdma_base + SDMA_SCRDP);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static inline void
|
||
|
mpsc_sdma_set_tx_ring(struct mpsc_port_info *pi, struct mpsc_tx_desc *txre_p)
|
||
|
{
|
||
|
writel((u32)txre_p, pi->sdma_base + SDMA_SFTDP);
|
||
|
writel((u32)txre_p, pi->sdma_base + SDMA_SCTDP);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static inline void
|
||
|
mpsc_sdma_cmd(struct mpsc_port_info *pi, u32 val)
|
||
|
{
|
||
|
u32 v;
|
||
|
|
||
|
v = readl(pi->sdma_base + SDMA_SDCM);
|
||
|
if (val)
|
||
|
v |= val;
|
||
|
else
|
||
|
v = 0;
|
||
|
wmb();
|
||
|
writel(v, pi->sdma_base + SDMA_SDCM);
|
||
|
wmb();
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static inline uint
|
||
|
mpsc_sdma_tx_active(struct mpsc_port_info *pi)
|
||
|
{
|
||
|
return readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_TXD;
|
||
|
}
|
||
|
|
||
|
static inline void
|
||
|
mpsc_sdma_start_tx(struct mpsc_port_info *pi)
|
||
|
{
|
||
|
struct mpsc_tx_desc *txre, *txre_p;
|
||
|
|
||
|
/* If tx isn't running & there's a desc ready to go, start it */
|
||
|
if (!mpsc_sdma_tx_active(pi)) {
|
||
|
txre = (struct mpsc_tx_desc *)(pi->txr +
|
||
|
(pi->txr_tail * MPSC_TXRE_SIZE));
|
||
|
dma_cache_sync((void *) txre, MPSC_TXRE_SIZE, DMA_FROM_DEVICE);
|
||
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
||
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
||
|
invalidate_dcache_range((ulong)txre,
|
||
|
(ulong)txre + MPSC_TXRE_SIZE);
|
||
|
#endif
|
||
|
|
||
|
if (be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O) {
|
||
|
txre_p = (struct mpsc_tx_desc *)(pi->txr_p +
|
||
|
(pi->txr_tail *
|
||
|
MPSC_TXRE_SIZE));
|
||
|
|
||
|
mpsc_sdma_set_tx_ring(pi, txre_p);
|
||
|
mpsc_sdma_cmd(pi, SDMA_SDCM_STD | SDMA_SDCM_TXD);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static inline void
|
||
|
mpsc_sdma_stop(struct mpsc_port_info *pi)
|
||
|
{
|
||
|
pr_debug("mpsc_sdma_stop[%d]: Stopping SDMA\n", pi->port.line);
|
||
|
|
||
|
/* Abort any SDMA transfers */
|
||
|
mpsc_sdma_cmd(pi, 0);
|
||
|
mpsc_sdma_cmd(pi, SDMA_SDCM_AR | SDMA_SDCM_AT);
|
||
|
|
||
|
/* Clear the SDMA current and first TX and RX pointers */
|
||
|
mpsc_sdma_set_tx_ring(pi, 0);
|
||
|
mpsc_sdma_set_rx_ring(pi, 0);
|
||
|
|
||
|
/* Disable interrupts */
|
||
|
mpsc_sdma_intr_mask(pi, 0xf);
|
||
|
mpsc_sdma_intr_ack(pi);
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
******************************************************************************
|
||
|
*
|
||
|
* Multi-Protocol Serial Controller Routines (MPSC)
|
||
|
*
|
||
|
******************************************************************************
|
||
|
*/
|
||
|
|
||
|
static void
|
||
|
mpsc_hw_init(struct mpsc_port_info *pi)
|
||
|
{
|
||
|
u32 v;
|
||
|
|
||
|
pr_debug("mpsc_hw_init[%d]: Initializing hardware\n", pi->port.line);
|
||
|
|
||
|
/* Set up clock routing */
|
||
|
if (pi->mirror_regs) {
|
||
|
v = pi->shared_regs->MPSC_MRR_m;
|
||
|
v &= ~0x1c7;
|
||
|
pi->shared_regs->MPSC_MRR_m = v;
|
||
|
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR);
|
||
|
|
||
|
v = pi->shared_regs->MPSC_RCRR_m;
|
||
|
v = (v & ~0xf0f) | 0x100;
|
||
|
pi->shared_regs->MPSC_RCRR_m = v;
|
||
|
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
|
||
|
|
||
|
v = pi->shared_regs->MPSC_TCRR_m;
|
||
|
v = (v & ~0xf0f) | 0x100;
|
||
|
pi->shared_regs->MPSC_TCRR_m = v;
|
||
|
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
|
||
|
}
|
||
|
else {
|
||
|
v = readl(pi->shared_regs->mpsc_routing_base + MPSC_MRR);
|
||
|
v &= ~0x1c7;
|
||
|
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR);
|
||
|
|
||
|
v = readl(pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
|
||
|
v = (v & ~0xf0f) | 0x100;
|
||
|
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
|
||
|
|
||
|
v = readl(pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
|
||
|
v = (v & ~0xf0f) | 0x100;
|
||
|
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
|
||
|
}
|
||
|
|
||
|
/* Put MPSC in UART mode & enabel Tx/Rx egines */
|
||
|
writel(0x000004c4, pi->mpsc_base + MPSC_MMCRL);
|
||
|
|
||
|
/* No preamble, 16x divider, low-latency, */
|
||
|
writel(0x04400400, pi->mpsc_base + MPSC_MMCRH);
|
||
|
|
||
|
if (pi->mirror_regs) {
|
||
|
pi->MPSC_CHR_1_m = 0;
|
||
|
pi->MPSC_CHR_2_m = 0;
|
||
|
}
|
||
|
writel(0, pi->mpsc_base + MPSC_CHR_1);
|
||
|
writel(0, pi->mpsc_base + MPSC_CHR_2);
|
||
|
writel(pi->mpsc_max_idle, pi->mpsc_base + MPSC_CHR_3);
|
||
|
writel(0, pi->mpsc_base + MPSC_CHR_4);
|
||
|
writel(0, pi->mpsc_base + MPSC_CHR_5);
|
||
|
writel(0, pi->mpsc_base + MPSC_CHR_6);
|
||
|
writel(0, pi->mpsc_base + MPSC_CHR_7);
|
||
|
writel(0, pi->mpsc_base + MPSC_CHR_8);
|
||
|
writel(0, pi->mpsc_base + MPSC_CHR_9);
|
||
|
writel(0, pi->mpsc_base + MPSC_CHR_10);
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static inline void
|
||
|
mpsc_enter_hunt(struct mpsc_port_info *pi)
|
||
|
{
|
||
|
pr_debug("mpsc_enter_hunt[%d]: Hunting...\n", pi->port.line);
|
||
|
|
||
|
if (pi->mirror_regs) {
|
||
|
writel(pi->MPSC_CHR_2_m | MPSC_CHR_2_EH,
|
||
|
pi->mpsc_base + MPSC_CHR_2);
|
||
|
/* Erratum prevents reading CHR_2 so just delay for a while */
|
||
|
udelay(100);
|
||
|
}
|
||
|
else {
|
||
|
writel(readl(pi->mpsc_base + MPSC_CHR_2) | MPSC_CHR_2_EH,
|
||
|
pi->mpsc_base + MPSC_CHR_2);
|
||
|
|
||
|
while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_EH)
|
||
|
udelay(10);
|
||
|
}
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static inline void
|
||
|
mpsc_freeze(struct mpsc_port_info *pi)
|
||
|
{
|
||
|
u32 v;
|
||
|
|
||
|
pr_debug("mpsc_freeze[%d]: Freezing\n", pi->port.line);
|
||
|
|
||
|
v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
|
||
|
readl(pi->mpsc_base + MPSC_MPCR);
|
||
|
v |= MPSC_MPCR_FRZ;
|
||
|
|
||
|
if (pi->mirror_regs)
|
||
|
pi->MPSC_MPCR_m = v;
|
||
|
writel(v, pi->mpsc_base + MPSC_MPCR);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static inline void
|
||
|
mpsc_unfreeze(struct mpsc_port_info *pi)
|
||
|
{
|
||
|
u32 v;
|
||
|
|
||
|
v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
|
||
|
readl(pi->mpsc_base + MPSC_MPCR);
|
||
|
v &= ~MPSC_MPCR_FRZ;
|
||
|
|
||
|
if (pi->mirror_regs)
|
||
|
pi->MPSC_MPCR_m = v;
|
||
|
writel(v, pi->mpsc_base + MPSC_MPCR);
|
||
|
|
||
|
pr_debug("mpsc_unfreeze[%d]: Unfrozen\n", pi->port.line);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static inline void
|
||
|
mpsc_set_char_length(struct mpsc_port_info *pi, u32 len)
|
||
|
{
|
||
|
u32 v;
|
||
|
|
||
|
pr_debug("mpsc_set_char_length[%d]: char len: %d\n", pi->port.line,len);
|
||
|
|
||
|
v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
|
||
|
readl(pi->mpsc_base + MPSC_MPCR);
|
||
|
v = (v & ~(0x3 << 12)) | ((len & 0x3) << 12);
|
||
|
|
||
|
if (pi->mirror_regs)
|
||
|
pi->MPSC_MPCR_m = v;
|
||
|
writel(v, pi->mpsc_base + MPSC_MPCR);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static inline void
|
||
|
mpsc_set_stop_bit_length(struct mpsc_port_info *pi, u32 len)
|
||
|
{
|
||
|
u32 v;
|
||
|
|
||
|
pr_debug("mpsc_set_stop_bit_length[%d]: stop bits: %d\n",
|
||
|
pi->port.line, len);
|
||
|
|
||
|
v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
|
||
|
readl(pi->mpsc_base + MPSC_MPCR);
|
||
|
|
||
|
v = (v & ~(1 << 14)) | ((len & 0x1) << 14);
|
||
|
|
||
|
if (pi->mirror_regs)
|
||
|
pi->MPSC_MPCR_m = v;
|
||
|
writel(v, pi->mpsc_base + MPSC_MPCR);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static inline void
|
||
|
mpsc_set_parity(struct mpsc_port_info *pi, u32 p)
|
||
|
{
|
||
|
u32 v;
|
||
|
|
||
|
pr_debug("mpsc_set_parity[%d]: parity bits: 0x%x\n", pi->port.line, p);
|
||
|
|
||
|
v = (pi->mirror_regs) ? pi->MPSC_CHR_2_m :
|
||
|
readl(pi->mpsc_base + MPSC_CHR_2);
|
||
|
|
||
|
p &= 0x3;
|
||
|
v = (v & ~0xc000c) | (p << 18) | (p << 2);
|
||
|
|
||
|
if (pi->mirror_regs)
|
||
|
pi->MPSC_CHR_2_m = v;
|
||
|
writel(v, pi->mpsc_base + MPSC_CHR_2);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
******************************************************************************
|
||
|
*
|
||
|
* Driver Init Routines
|
||
|
*
|
||
|
******************************************************************************
|
||
|
*/
|
||
|
|
||
|
static void
|
||
|
mpsc_init_hw(struct mpsc_port_info *pi)
|
||
|
{
|
||
|
pr_debug("mpsc_init_hw[%d]: Initializing\n", pi->port.line);
|
||
|
|
||
|
mpsc_brg_init(pi, pi->brg_clk_src);
|
||
|
mpsc_brg_enable(pi);
|
||
|
mpsc_sdma_init(pi, dma_get_cache_alignment()); /* burst a cacheline */
|
||
|
mpsc_sdma_stop(pi);
|
||
|
mpsc_hw_init(pi);
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
mpsc_alloc_ring_mem(struct mpsc_port_info *pi)
|
||
|
{
|
||
|
int rc = 0;
|
||
|
static void mpsc_free_ring_mem(struct mpsc_port_info *pi);
|
||
|
|
||
|
pr_debug("mpsc_alloc_ring_mem[%d]: Allocating ring mem\n",
|
||
|
pi->port.line);
|
||
|
|
||
|
if (!pi->dma_region) {
|
||
|
if (!dma_supported(pi->port.dev, 0xffffffff)) {
|
||
|
printk(KERN_ERR "MPSC: Inadequate DMA support\n");
|
||
|
rc = -ENXIO;
|
||
|
}
|
||
|
else if ((pi->dma_region = dma_alloc_noncoherent(pi->port.dev,
|
||
|
MPSC_DMA_ALLOC_SIZE, &pi->dma_region_p, GFP_KERNEL))
|
||
|
== NULL) {
|
||
|
|
||
|
printk(KERN_ERR "MPSC: Can't alloc Desc region\n");
|
||
|
rc = -ENOMEM;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
mpsc_free_ring_mem(struct mpsc_port_info *pi)
|
||
|
{
|
||
|
pr_debug("mpsc_free_ring_mem[%d]: Freeing ring mem\n", pi->port.line);
|
||
|
|
||
|
if (pi->dma_region) {
|
||
|
dma_free_noncoherent(pi->port.dev, MPSC_DMA_ALLOC_SIZE,
|
||
|
pi->dma_region, pi->dma_region_p);
|
||
|
pi->dma_region = NULL;
|
||
|
pi->dma_region_p = (dma_addr_t) NULL;
|
||
|
}
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
mpsc_init_rings(struct mpsc_port_info *pi)
|
||
|
{
|
||
|
struct mpsc_rx_desc *rxre;
|
||
|
struct mpsc_tx_desc *txre;
|
||
|
dma_addr_t dp, dp_p;
|
||
|
u8 *bp, *bp_p;
|
||
|
int i;
|
||
|
|
||
|
pr_debug("mpsc_init_rings[%d]: Initializing rings\n", pi->port.line);
|
||
|
|
||
|
BUG_ON(pi->dma_region == NULL);
|
||
|
|
||
|
memset(pi->dma_region, 0, MPSC_DMA_ALLOC_SIZE);
|
||
|
|
||
|
/*
|
||
|
* Descriptors & buffers are multiples of cacheline size and must be
|
||
|
* cacheline aligned.
|
||
|
*/
|
||
|
dp = ALIGN((u32) pi->dma_region, dma_get_cache_alignment());
|
||
|
dp_p = ALIGN((u32) pi->dma_region_p, dma_get_cache_alignment());
|
||
|
|
||
|
/*
|
||
|
* Partition dma region into rx ring descriptor, rx buffers,
|
||
|
* tx ring descriptors, and tx buffers.
|
||
|
*/
|
||
|
pi->rxr = dp;
|
||
|
pi->rxr_p = dp_p;
|
||
|
dp += MPSC_RXR_SIZE;
|
||
|
dp_p += MPSC_RXR_SIZE;
|
||
|
|
||
|
pi->rxb = (u8 *) dp;
|
||
|
pi->rxb_p = (u8 *) dp_p;
|
||
|
dp += MPSC_RXB_SIZE;
|
||
|
dp_p += MPSC_RXB_SIZE;
|
||
|
|
||
|
pi->rxr_posn = 0;
|
||
|
|
||
|
pi->txr = dp;
|
||
|
pi->txr_p = dp_p;
|
||
|
dp += MPSC_TXR_SIZE;
|
||
|
dp_p += MPSC_TXR_SIZE;
|
||
|
|
||
|
pi->txb = (u8 *) dp;
|
||
|
pi->txb_p = (u8 *) dp_p;
|
||
|
|
||
|
pi->txr_head = 0;
|
||
|
pi->txr_tail = 0;
|
||
|
|
||
|
/* Init rx ring descriptors */
|
||
|
dp = pi->rxr;
|
||
|
dp_p = pi->rxr_p;
|
||
|
bp = pi->rxb;
|
||
|
bp_p = pi->rxb_p;
|
||
|
|
||
|
for (i = 0; i < MPSC_RXR_ENTRIES; i++) {
|
||
|
rxre = (struct mpsc_rx_desc *)dp;
|
||
|
|
||
|
rxre->bufsize = cpu_to_be16(MPSC_RXBE_SIZE);
|
||
|
rxre->bytecnt = cpu_to_be16(0);
|
||
|
rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O |
|
||
|
SDMA_DESC_CMDSTAT_EI |
|
||
|
SDMA_DESC_CMDSTAT_F |
|
||
|
SDMA_DESC_CMDSTAT_L);
|
||
|
rxre->link = cpu_to_be32(dp_p + MPSC_RXRE_SIZE);
|
||
|
rxre->buf_ptr = cpu_to_be32(bp_p);
|
||
|
|
||
|
dp += MPSC_RXRE_SIZE;
|
||
|
dp_p += MPSC_RXRE_SIZE;
|
||
|
bp += MPSC_RXBE_SIZE;
|
||
|
bp_p += MPSC_RXBE_SIZE;
|
||
|
}
|
||
|
rxre->link = cpu_to_be32(pi->rxr_p); /* Wrap last back to first */
|
||
|
|
||
|
/* Init tx ring descriptors */
|
||
|
dp = pi->txr;
|
||
|
dp_p = pi->txr_p;
|
||
|
bp = pi->txb;
|
||
|
bp_p = pi->txb_p;
|
||
|
|
||
|
for (i = 0; i < MPSC_TXR_ENTRIES; i++) {
|
||
|
txre = (struct mpsc_tx_desc *)dp;
|
||
|
|
||
|
txre->link = cpu_to_be32(dp_p + MPSC_TXRE_SIZE);
|
||
|
txre->buf_ptr = cpu_to_be32(bp_p);
|
||
|
|
||
|
dp += MPSC_TXRE_SIZE;
|
||
|
dp_p += MPSC_TXRE_SIZE;
|
||
|
bp += MPSC_TXBE_SIZE;
|
||
|
bp_p += MPSC_TXBE_SIZE;
|
||
|
}
|
||
|
txre->link = cpu_to_be32(pi->txr_p); /* Wrap last back to first */
|
||
|
|
||
|
dma_cache_sync((void *) pi->dma_region, MPSC_DMA_ALLOC_SIZE,
|
||
|
DMA_BIDIRECTIONAL);
|
||
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
||
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
||
|
flush_dcache_range((ulong)pi->dma_region,
|
||
|
(ulong)pi->dma_region + MPSC_DMA_ALLOC_SIZE);
|
||
|
#endif
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
mpsc_uninit_rings(struct mpsc_port_info *pi)
|
||
|
{
|
||
|
pr_debug("mpsc_uninit_rings[%d]: Uninitializing rings\n",pi->port.line);
|
||
|
|
||
|
BUG_ON(pi->dma_region == NULL);
|
||
|
|
||
|
pi->rxr = 0;
|
||
|
pi->rxr_p = 0;
|
||
|
pi->rxb = NULL;
|
||
|
pi->rxb_p = NULL;
|
||
|
pi->rxr_posn = 0;
|
||
|
|
||
|
pi->txr = 0;
|
||
|
pi->txr_p = 0;
|
||
|
pi->txb = NULL;
|
||
|
pi->txb_p = NULL;
|
||
|
pi->txr_head = 0;
|
||
|
pi->txr_tail = 0;
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
mpsc_make_ready(struct mpsc_port_info *pi)
|
||
|
{
|
||
|
int rc;
|
||
|
|
||
|
pr_debug("mpsc_make_ready[%d]: Making cltr ready\n", pi->port.line);
|
||
|
|
||
|
if (!pi->ready) {
|
||
|
mpsc_init_hw(pi);
|
||
|
if ((rc = mpsc_alloc_ring_mem(pi)))
|
||
|
return rc;
|
||
|
mpsc_init_rings(pi);
|
||
|
pi->ready = 1;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
******************************************************************************
|
||
|
*
|
||
|
* Interrupt Handling Routines
|
||
|
*
|
||
|
******************************************************************************
|
||
|
*/
|
||
|
|
||
|
static inline int
|
||
|
mpsc_rx_intr(struct mpsc_port_info *pi, struct pt_regs *regs)
|
||
|
{
|
||
|
struct mpsc_rx_desc *rxre;
|
||
|
struct tty_struct *tty = pi->port.info->tty;
|
||
|
u32 cmdstat, bytes_in, i;
|
||
|
int rc = 0;
|
||
|
u8 *bp;
|
||
|
char flag = TTY_NORMAL;
|
||
|
static void mpsc_start_rx(struct mpsc_port_info *pi);
|
||
|
|
||
|
pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line);
|
||
|
|
||
|
rxre = (struct mpsc_rx_desc *)(pi->rxr + (pi->rxr_posn*MPSC_RXRE_SIZE));
|
||
|
|
||
|
dma_cache_sync((void *)rxre, MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
|
||
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
||
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
||
|
invalidate_dcache_range((ulong)rxre,
|
||
|
(ulong)rxre + MPSC_RXRE_SIZE);
|
||
|
#endif
|
||
|
|
||
|
/*
|
||
|
* Loop through Rx descriptors handling ones that have been completed.
|
||
|
*/
|
||
|
while (!((cmdstat = be32_to_cpu(rxre->cmdstat)) & SDMA_DESC_CMDSTAT_O)){
|
||
|
bytes_in = be16_to_cpu(rxre->bytecnt);
|
||
|
|
||
|
/* Following use of tty struct directly is deprecated */
|
||
|
if (unlikely((tty->flip.count + bytes_in) >= TTY_FLIPBUF_SIZE)){
|
||
|
if (tty->low_latency)
|
||
|
tty_flip_buffer_push(tty);
|
||
|
/*
|
||
|
* If this failed then we will throw awa the bytes
|
||
|
* but mst do so to clear interrupts.
|
||
|
*/
|
||
|
}
|
||
|
|
||
|
bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE);
|
||
|
dma_cache_sync((void *) bp, MPSC_RXBE_SIZE, DMA_FROM_DEVICE);
|
||
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
||
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
||
|
invalidate_dcache_range((ulong)bp,
|
||
|
(ulong)bp + MPSC_RXBE_SIZE);
|
||
|
#endif
|
||
|
|
||
|
/*
|
||
|
* Other than for parity error, the manual provides little
|
||
|
* info on what data will be in a frame flagged by any of
|
||
|
* these errors. For parity error, it is the last byte in
|
||
|
* the buffer that had the error. As for the rest, I guess
|
||
|
* we'll assume there is no data in the buffer.
|
||
|
* If there is...it gets lost.
|
||
|
*/
|
||
|
if (unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR |
|
||
|
SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) {
|
||
|
|
||
|
pi->port.icount.rx++;
|
||
|
|
||
|
if (cmdstat & SDMA_DESC_CMDSTAT_BR) { /* Break */
|
||
|
pi->port.icount.brk++;
|
||
|
|
||
|
if (uart_handle_break(&pi->port))
|
||
|
goto next_frame;
|
||
|
}
|
||
|
else if (cmdstat & SDMA_DESC_CMDSTAT_FR)/* Framing */
|
||
|
pi->port.icount.frame++;
|
||
|
else if (cmdstat & SDMA_DESC_CMDSTAT_OR) /* Overrun */
|
||
|
pi->port.icount.overrun++;
|
||
|
|
||
|
cmdstat &= pi->port.read_status_mask;
|
||
|
|
||
|
if (cmdstat & SDMA_DESC_CMDSTAT_BR)
|
||
|
flag = TTY_BREAK;
|
||
|
else if (cmdstat & SDMA_DESC_CMDSTAT_FR)
|
||
|
flag = TTY_FRAME;
|
||
|
else if (cmdstat & SDMA_DESC_CMDSTAT_OR)
|
||
|
flag = TTY_OVERRUN;
|
||
|
else if (cmdstat & SDMA_DESC_CMDSTAT_PE)
|
||
|
flag = TTY_PARITY;
|
||
|
}
|
||
|
|
||
|
if (uart_handle_sysrq_char(&pi->port, *bp, regs)) {
|
||
|
bp++;
|
||
|
bytes_in--;
|
||
|
goto next_frame;
|
||
|
}
|
||
|
|
||
|
if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR |
|
||
|
SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) &&
|
||
|
!(cmdstat & pi->port.ignore_status_mask))
|
||
|
|
||
|
tty_insert_flip_char(tty, *bp, flag);
|
||
|
else {
|
||
|
for (i=0; i<bytes_in; i++)
|
||
|
tty_insert_flip_char(tty, *bp++, TTY_NORMAL);
|
||
|
|
||
|
pi->port.icount.rx += bytes_in;
|
||
|
}
|
||
|
|
||
|
next_frame:
|
||
|
rxre->bytecnt = cpu_to_be16(0);
|
||
|
wmb();
|
||
|
rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O |
|
||
|
SDMA_DESC_CMDSTAT_EI |
|
||
|
SDMA_DESC_CMDSTAT_F |
|
||
|
SDMA_DESC_CMDSTAT_L);
|
||
|
wmb();
|
||
|
dma_cache_sync((void *)rxre, MPSC_RXRE_SIZE, DMA_BIDIRECTIONAL);
|
||
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
||
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
||
|
flush_dcache_range((ulong)rxre,
|
||
|
(ulong)rxre + MPSC_RXRE_SIZE);
|
||
|
#endif
|
||
|
|
||
|
/* Advance to next descriptor */
|
||
|
pi->rxr_posn = (pi->rxr_posn + 1) & (MPSC_RXR_ENTRIES - 1);
|
||
|
rxre = (struct mpsc_rx_desc *)(pi->rxr +
|
||
|
(pi->rxr_posn * MPSC_RXRE_SIZE));
|
||
|
dma_cache_sync((void *)rxre, MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
|
||
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
||
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
||
|
invalidate_dcache_range((ulong)rxre,
|
||
|
(ulong)rxre + MPSC_RXRE_SIZE);
|
||
|
#endif
|
||
|
|
||
|
rc = 1;
|
||
|
}
|
||
|
|
||
|
/* Restart rx engine, if its stopped */
|
||
|
if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0)
|
||
|
mpsc_start_rx(pi);
|
||
|
|
||
|
tty_flip_buffer_push(tty);
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
static inline void
|
||
|
mpsc_setup_tx_desc(struct mpsc_port_info *pi, u32 count, u32 intr)
|
||
|
{
|
||
|
struct mpsc_tx_desc *txre;
|
||
|
|
||
|
txre = (struct mpsc_tx_desc *)(pi->txr +
|
||
|
(pi->txr_head * MPSC_TXRE_SIZE));
|
||
|
|
||
|
txre->bytecnt = cpu_to_be16(count);
|
||
|
txre->shadow = txre->bytecnt;
|
||
|
wmb(); /* ensure cmdstat is last field updated */
|
||
|
txre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | SDMA_DESC_CMDSTAT_F |
|
||
|
SDMA_DESC_CMDSTAT_L | ((intr) ?
|
||
|
SDMA_DESC_CMDSTAT_EI
|
||
|
: 0));
|
||
|
wmb();
|
||
|
dma_cache_sync((void *) txre, MPSC_TXRE_SIZE, DMA_BIDIRECTIONAL);
|
||
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
||
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
||
|
flush_dcache_range((ulong)txre,
|
||
|
(ulong)txre + MPSC_TXRE_SIZE);
|
||
|
#endif
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static inline void
|
||
|
mpsc_copy_tx_data(struct mpsc_port_info *pi)
|
||
|
{
|
||
|
struct circ_buf *xmit = &pi->port.info->xmit;
|
||
|
u8 *bp;
|
||
|
u32 i;
|
||
|
|
||
|
/* Make sure the desc ring isn't full */
|
||
|
while (CIRC_CNT(pi->txr_head, pi->txr_tail, MPSC_TXR_ENTRIES) <
|
||
|
(MPSC_TXR_ENTRIES - 1)) {
|
||
|
if (pi->port.x_char) {
|
||
|
/*
|
||
|
* Ideally, we should use the TCS field in
|
||
|
* CHR_1 to put the x_char out immediately but
|
||
|
* errata prevents us from being able to read
|
||
|
* CHR_2 to know that its safe to write to
|
||
|
* CHR_1. Instead, just put it in-band with
|
||
|
* all the other Tx data.
|
||
|
*/
|
||
|
bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
|
||
|
*bp = pi->port.x_char;
|
||
|
pi->port.x_char = 0;
|
||
|
i = 1;
|
||
|
}
|
||
|
else if (!uart_circ_empty(xmit) && !uart_tx_stopped(&pi->port)){
|
||
|
i = min((u32) MPSC_TXBE_SIZE,
|
||
|
(u32) uart_circ_chars_pending(xmit));
|
||
|
i = min(i, (u32) CIRC_CNT_TO_END(xmit->head, xmit->tail,
|
||
|
UART_XMIT_SIZE));
|
||
|
bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
|
||
|
memcpy(bp, &xmit->buf[xmit->tail], i);
|
||
|
xmit->tail = (xmit->tail + i) & (UART_XMIT_SIZE - 1);
|
||
|
|
||
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
||
|
uart_write_wakeup(&pi->port);
|
||
|
}
|
||
|
else /* All tx data copied into ring bufs */
|
||
|
return;
|
||
|
|
||
|
dma_cache_sync((void *) bp, MPSC_TXBE_SIZE, DMA_BIDIRECTIONAL);
|
||
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
||
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
||
|
flush_dcache_range((ulong)bp,
|
||
|
(ulong)bp + MPSC_TXBE_SIZE);
|
||
|
#endif
|
||
|
mpsc_setup_tx_desc(pi, i, 1);
|
||
|
|
||
|
/* Advance to next descriptor */
|
||
|
pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1);
|
||
|
}
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static inline int
|
||
|
mpsc_tx_intr(struct mpsc_port_info *pi)
|
||
|
{
|
||
|
struct mpsc_tx_desc *txre;
|
||
|
int rc = 0;
|
||
|
|
||
|
if (!mpsc_sdma_tx_active(pi)) {
|
||
|
txre = (struct mpsc_tx_desc *)(pi->txr +
|
||
|
(pi->txr_tail * MPSC_TXRE_SIZE));
|
||
|
|
||
|
dma_cache_sync((void *) txre, MPSC_TXRE_SIZE, DMA_FROM_DEVICE);
|
||
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
||
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
||
|
invalidate_dcache_range((ulong)txre,
|
||
|
(ulong)txre + MPSC_TXRE_SIZE);
|
||
|
#endif
|
||
|
|
||
|
while (!(be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O)) {
|
||
|
rc = 1;
|
||
|
pi->port.icount.tx += be16_to_cpu(txre->bytecnt);
|
||
|
pi->txr_tail = (pi->txr_tail+1) & (MPSC_TXR_ENTRIES-1);
|
||
|
|
||
|
/* If no more data to tx, fall out of loop */
|
||
|
if (pi->txr_head == pi->txr_tail)
|
||
|
break;
|
||
|
|
||
|
txre = (struct mpsc_tx_desc *)(pi->txr +
|
||
|
(pi->txr_tail * MPSC_TXRE_SIZE));
|
||
|
dma_cache_sync((void *) txre, MPSC_TXRE_SIZE,
|
||
|
DMA_FROM_DEVICE);
|
||
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
||
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
||
|
invalidate_dcache_range((ulong)txre,
|
||
|
(ulong)txre + MPSC_TXRE_SIZE);
|
||
|
#endif
|
||
|
}
|
||
|
|
||
|
mpsc_copy_tx_data(pi);
|
||
|
mpsc_sdma_start_tx(pi); /* start next desc if ready */
|
||
|
}
|
||
|
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* This is the driver's interrupt handler. To avoid a race, we first clear
|
||
|
* the interrupt, then handle any completed Rx/Tx descriptors. When done
|
||
|
* handling those descriptors, we restart the Rx/Tx engines if they're stopped.
|
||
|
*/
|
||
|
static irqreturn_t
|
||
|
mpsc_sdma_intr(int irq, void *dev_id, struct pt_regs *regs)
|
||
|
{
|
||
|
struct mpsc_port_info *pi = dev_id;
|
||
|
ulong iflags;
|
||
|
int rc = IRQ_NONE;
|
||
|
|
||
|
pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Received\n",pi->port.line);
|
||
|
|
||
|
spin_lock_irqsave(&pi->port.lock, iflags);
|
||
|
mpsc_sdma_intr_ack(pi);
|
||
|
if (mpsc_rx_intr(pi, regs))
|
||
|
rc = IRQ_HANDLED;
|
||
|
if (mpsc_tx_intr(pi))
|
||
|
rc = IRQ_HANDLED;
|
||
|
spin_unlock_irqrestore(&pi->port.lock, iflags);
|
||
|
|
||
|
pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Handled\n", pi->port.line);
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
******************************************************************************
|
||
|
*
|
||
|
* serial_core.c Interface routines
|
||
|
*
|
||
|
******************************************************************************
|
||
|
*/
|
||
|
static uint
|
||
|
mpsc_tx_empty(struct uart_port *port)
|
||
|
{
|
||
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
||
|
ulong iflags;
|
||
|
uint rc;
|
||
|
|
||
|
spin_lock_irqsave(&pi->port.lock, iflags);
|
||
|
rc = mpsc_sdma_tx_active(pi) ? 0 : TIOCSER_TEMT;
|
||
|
spin_unlock_irqrestore(&pi->port.lock, iflags);
|
||
|
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
mpsc_set_mctrl(struct uart_port *port, uint mctrl)
|
||
|
{
|
||
|
/* Have no way to set modem control lines AFAICT */
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static uint
|
||
|
mpsc_get_mctrl(struct uart_port *port)
|
||
|
{
|
||
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
||
|
u32 mflags, status;
|
||
|
ulong iflags;
|
||
|
|
||
|
spin_lock_irqsave(&pi->port.lock, iflags);
|
||
|
status = (pi->mirror_regs) ? pi->MPSC_CHR_10_m :
|
||
|
readl(pi->mpsc_base + MPSC_CHR_10);
|
||
|
spin_unlock_irqrestore(&pi->port.lock, iflags);
|
||
|
|
||
|
mflags = 0;
|
||
|
if (status & 0x1)
|
||
|
mflags |= TIOCM_CTS;
|
||
|
if (status & 0x2)
|
||
|
mflags |= TIOCM_CAR;
|
||
|
|
||
|
return mflags | TIOCM_DSR; /* No way to tell if DSR asserted */
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
mpsc_stop_tx(struct uart_port *port, uint tty_start)
|
||
|
{
|
||
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
||
|
|
||
|
pr_debug("mpsc_stop_tx[%d]: tty_start: %d\n", port->line, tty_start);
|
||
|
|
||
|
mpsc_freeze(pi);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
mpsc_start_tx(struct uart_port *port, uint tty_start)
|
||
|
{
|
||
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
||
|
|
||
|
mpsc_unfreeze(pi);
|
||
|
mpsc_copy_tx_data(pi);
|
||
|
mpsc_sdma_start_tx(pi);
|
||
|
|
||
|
pr_debug("mpsc_start_tx[%d]: tty_start: %d\n", port->line, tty_start);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
mpsc_start_rx(struct mpsc_port_info *pi)
|
||
|
{
|
||
|
pr_debug("mpsc_start_rx[%d]: Starting...\n", pi->port.line);
|
||
|
|
||
|
if (pi->rcv_data) {
|
||
|
mpsc_enter_hunt(pi);
|
||
|
mpsc_sdma_cmd(pi, SDMA_SDCM_ERD);
|
||
|
}
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
mpsc_stop_rx(struct uart_port *port)
|
||
|
{
|
||
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
||
|
|
||
|
pr_debug("mpsc_stop_rx[%d]: Stopping...\n", port->line);
|
||
|
|
||
|
mpsc_sdma_cmd(pi, SDMA_SDCM_AR);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
mpsc_enable_ms(struct uart_port *port)
|
||
|
{
|
||
|
return; /* Not supported */
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
mpsc_break_ctl(struct uart_port *port, int ctl)
|
||
|
{
|
||
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
||
|
ulong flags;
|
||
|
u32 v;
|
||
|
|
||
|
v = ctl ? 0x00ff0000 : 0;
|
||
|
|
||
|
spin_lock_irqsave(&pi->port.lock, flags);
|
||
|
if (pi->mirror_regs)
|
||
|
pi->MPSC_CHR_1_m = v;
|
||
|
writel(v, pi->mpsc_base + MPSC_CHR_1);
|
||
|
spin_unlock_irqrestore(&pi->port.lock, flags);
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
mpsc_startup(struct uart_port *port)
|
||
|
{
|
||
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
||
|
u32 flag = 0;
|
||
|
int rc;
|
||
|
|
||
|
pr_debug("mpsc_startup[%d]: Starting up MPSC, irq: %d\n",
|
||
|
port->line, pi->port.irq);
|
||
|
|
||
|
if ((rc = mpsc_make_ready(pi)) == 0) {
|
||
|
/* Setup IRQ handler */
|
||
|
mpsc_sdma_intr_ack(pi);
|
||
|
|
||
|
/* If irq's are shared, need to set flag */
|
||
|
if (mpsc_ports[0].port.irq == mpsc_ports[1].port.irq)
|
||
|
flag = SA_SHIRQ;
|
||
|
|
||
|
if (request_irq(pi->port.irq, mpsc_sdma_intr, flag,
|
||
|
"mpsc/sdma", pi))
|
||
|
printk(KERN_ERR "MPSC: Can't get SDMA IRQ %d\n",
|
||
|
pi->port.irq);
|
||
|
|
||
|
mpsc_sdma_intr_unmask(pi, 0xf);
|
||
|
mpsc_sdma_set_rx_ring(pi, (struct mpsc_rx_desc *)(pi->rxr_p +
|
||
|
(pi->rxr_posn * MPSC_RXRE_SIZE)));
|
||
|
}
|
||
|
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
mpsc_shutdown(struct uart_port *port)
|
||
|
{
|
||
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
||
|
static void mpsc_release_port(struct uart_port *port);
|
||
|
|
||
|
pr_debug("mpsc_shutdown[%d]: Shutting down MPSC\n", port->line);
|
||
|
|
||
|
mpsc_sdma_stop(pi);
|
||
|
free_irq(pi->port.irq, pi);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
mpsc_set_termios(struct uart_port *port, struct termios *termios,
|
||
|
struct termios *old)
|
||
|
{
|
||
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
||
|
u32 baud;
|
||
|
ulong flags;
|
||
|
u32 chr_bits, stop_bits, par;
|
||
|
|
||
|
pi->c_iflag = termios->c_iflag;
|
||
|
pi->c_cflag = termios->c_cflag;
|
||
|
|
||
|
switch (termios->c_cflag & CSIZE) {
|
||
|
case CS5:
|
||
|
chr_bits = MPSC_MPCR_CL_5;
|
||
|
break;
|
||
|
case CS6:
|
||
|
chr_bits = MPSC_MPCR_CL_6;
|
||
|
break;
|
||
|
case CS7:
|
||
|
chr_bits = MPSC_MPCR_CL_7;
|
||
|
break;
|
||
|
case CS8:
|
||
|
default:
|
||
|
chr_bits = MPSC_MPCR_CL_8;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
if (termios->c_cflag & CSTOPB)
|
||
|
stop_bits = MPSC_MPCR_SBL_2;
|
||
|
else
|
||
|
stop_bits = MPSC_MPCR_SBL_1;
|
||
|
|
||
|
par = MPSC_CHR_2_PAR_EVEN;
|
||
|
if (termios->c_cflag & PARENB)
|
||
|
if (termios->c_cflag & PARODD)
|
||
|
par = MPSC_CHR_2_PAR_ODD;
|
||
|
#ifdef CMSPAR
|
||
|
if (termios->c_cflag & CMSPAR) {
|
||
|
if (termios->c_cflag & PARODD)
|
||
|
par = MPSC_CHR_2_PAR_MARK;
|
||
|
else
|
||
|
par = MPSC_CHR_2_PAR_SPACE;
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk);
|
||
|
|
||
|
spin_lock_irqsave(&pi->port.lock, flags);
|
||
|
|
||
|
uart_update_timeout(port, termios->c_cflag, baud);
|
||
|
|
||
|
mpsc_set_char_length(pi, chr_bits);
|
||
|
mpsc_set_stop_bit_length(pi, stop_bits);
|
||
|
mpsc_set_parity(pi, par);
|
||
|
mpsc_set_baudrate(pi, baud);
|
||
|
|
||
|
/* Characters/events to read */
|
||
|
pi->rcv_data = 1;
|
||
|
pi->port.read_status_mask = SDMA_DESC_CMDSTAT_OR;
|
||
|
|
||
|
if (termios->c_iflag & INPCK)
|
||
|
pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_PE |
|
||
|
SDMA_DESC_CMDSTAT_FR;
|
||
|
|
||
|
if (termios->c_iflag & (BRKINT | PARMRK))
|
||
|
pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_BR;
|
||
|
|
||
|
/* Characters/events to ignore */
|
||
|
pi->port.ignore_status_mask = 0;
|
||
|
|
||
|
if (termios->c_iflag & IGNPAR)
|
||
|
pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_PE |
|
||
|
SDMA_DESC_CMDSTAT_FR;
|
||
|
|
||
|
if (termios->c_iflag & IGNBRK) {
|
||
|
pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_BR;
|
||
|
|
||
|
if (termios->c_iflag & IGNPAR)
|
||
|
pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_OR;
|
||
|
}
|
||
|
|
||
|
/* Ignore all chars if CREAD not set */
|
||
|
if (!(termios->c_cflag & CREAD))
|
||
|
pi->rcv_data = 0;
|
||
|
else
|
||
|
mpsc_start_rx(pi);
|
||
|
|
||
|
spin_unlock_irqrestore(&pi->port.lock, flags);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static const char *
|
||
|
mpsc_type(struct uart_port *port)
|
||
|
{
|
||
|
pr_debug("mpsc_type[%d]: port type: %s\n", port->line,MPSC_DRIVER_NAME);
|
||
|
return MPSC_DRIVER_NAME;
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
mpsc_request_port(struct uart_port *port)
|
||
|
{
|
||
|
/* Should make chip/platform specific call */
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
mpsc_release_port(struct uart_port *port)
|
||
|
{
|
||
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
||
|
|
||
|
if (pi->ready) {
|
||
|
mpsc_uninit_rings(pi);
|
||
|
mpsc_free_ring_mem(pi);
|
||
|
pi->ready = 0;
|
||
|
}
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
mpsc_config_port(struct uart_port *port, int flags)
|
||
|
{
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
mpsc_verify_port(struct uart_port *port, struct serial_struct *ser)
|
||
|
{
|
||
|
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
|
||
|
int rc = 0;
|
||
|
|
||
|
pr_debug("mpsc_verify_port[%d]: Verifying port data\n", pi->port.line);
|
||
|
|
||
|
if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPSC)
|
||
|
rc = -EINVAL;
|
||
|
else if (pi->port.irq != ser->irq)
|
||
|
rc = -EINVAL;
|
||
|
else if (ser->io_type != SERIAL_IO_MEM)
|
||
|
rc = -EINVAL;
|
||
|
else if (pi->port.uartclk / 16 != ser->baud_base) /* Not sure */
|
||
|
rc = -EINVAL;
|
||
|
else if ((void *)pi->port.mapbase != ser->iomem_base)
|
||
|
rc = -EINVAL;
|
||
|
else if (pi->port.iobase != ser->port)
|
||
|
rc = -EINVAL;
|
||
|
else if (ser->hub6 != 0)
|
||
|
rc = -EINVAL;
|
||
|
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
static struct uart_ops mpsc_pops = {
|
||
|
.tx_empty = mpsc_tx_empty,
|
||
|
.set_mctrl = mpsc_set_mctrl,
|
||
|
.get_mctrl = mpsc_get_mctrl,
|
||
|
.stop_tx = mpsc_stop_tx,
|
||
|
.start_tx = mpsc_start_tx,
|
||
|
.stop_rx = mpsc_stop_rx,
|
||
|
.enable_ms = mpsc_enable_ms,
|
||
|
.break_ctl = mpsc_break_ctl,
|
||
|
.startup = mpsc_startup,
|
||
|
.shutdown = mpsc_shutdown,
|
||
|
.set_termios = mpsc_set_termios,
|
||
|
.type = mpsc_type,
|
||
|
.release_port = mpsc_release_port,
|
||
|
.request_port = mpsc_request_port,
|
||
|
.config_port = mpsc_config_port,
|
||
|
.verify_port = mpsc_verify_port,
|
||
|
};
|
||
|
|
||
|
/*
|
||
|
******************************************************************************
|
||
|
*
|
||
|
* Console Interface Routines
|
||
|
*
|
||
|
******************************************************************************
|
||
|
*/
|
||
|
|
||
|
#ifdef CONFIG_SERIAL_MPSC_CONSOLE
|
||
|
static void
|
||
|
mpsc_console_write(struct console *co, const char *s, uint count)
|
||
|
{
|
||
|
struct mpsc_port_info *pi = &mpsc_ports[co->index];
|
||
|
u8 *bp, *dp, add_cr = 0;
|
||
|
int i;
|
||
|
|
||
|
while (mpsc_sdma_tx_active(pi))
|
||
|
udelay(100);
|
||
|
|
||
|
while (count > 0) {
|
||
|
bp = dp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
|
||
|
|
||
|
for (i = 0; i < MPSC_TXBE_SIZE; i++) {
|
||
|
if (count == 0)
|
||
|
break;
|
||
|
|
||
|
if (add_cr) {
|
||
|
*(dp++) = '\r';
|
||
|
add_cr = 0;
|
||
|
}
|
||
|
else {
|
||
|
*(dp++) = *s;
|
||
|
|
||
|
if (*(s++) == '\n') { /* add '\r' after '\n' */
|
||
|
add_cr = 1;
|
||
|
count++;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
count--;
|
||
|
}
|
||
|
|
||
|
dma_cache_sync((void *) bp, MPSC_TXBE_SIZE, DMA_BIDIRECTIONAL);
|
||
|
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
|
||
|
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
|
||
|
flush_dcache_range((ulong)bp,
|
||
|
(ulong)bp + MPSC_TXBE_SIZE);
|
||
|
#endif
|
||
|
mpsc_setup_tx_desc(pi, i, 0);
|
||
|
pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1);
|
||
|
mpsc_sdma_start_tx(pi);
|
||
|
|
||
|
while (mpsc_sdma_tx_active(pi))
|
||
|
udelay(100);
|
||
|
|
||
|
pi->txr_tail = (pi->txr_tail + 1) & (MPSC_TXR_ENTRIES - 1);
|
||
|
}
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static int __init
|
||
|
mpsc_console_setup(struct console *co, char *options)
|
||
|
{
|
||
|
struct mpsc_port_info *pi;
|
||
|
int baud, bits, parity, flow;
|
||
|
|
||
|
pr_debug("mpsc_console_setup[%d]: options: %s\n", co->index, options);
|
||
|
|
||
|
if (co->index >= MPSC_NUM_CTLRS)
|
||
|
co->index = 0;
|
||
|
|
||
|
pi = &mpsc_ports[co->index];
|
||
|
|
||
|
baud = pi->default_baud;
|
||
|
bits = pi->default_bits;
|
||
|
parity = pi->default_parity;
|
||
|
flow = pi->default_flow;
|
||
|
|
||
|
if (!pi->port.ops)
|
||
|
return -ENODEV;
|
||
|
|
||
|
spin_lock_init(&pi->port.lock); /* Temporary fix--copied from 8250.c */
|
||
|
|
||
|
if (options)
|
||
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
||
|
|
||
|
return uart_set_options(&pi->port, co, baud, parity, bits, flow);
|
||
|
}
|
||
|
|
||
|
extern struct uart_driver mpsc_reg;
|
||
|
static struct console mpsc_console = {
|
||
|
.name = MPSC_DEV_NAME,
|
||
|
.write = mpsc_console_write,
|
||
|
.device = uart_console_device,
|
||
|
.setup = mpsc_console_setup,
|
||
|
.flags = CON_PRINTBUFFER,
|
||
|
.index = -1,
|
||
|
.data = &mpsc_reg,
|
||
|
};
|
||
|
|
||
|
static int __init
|
||
|
mpsc_late_console_init(void)
|
||
|
{
|
||
|
pr_debug("mpsc_late_console_init: Enter\n");
|
||
|
|
||
|
if (!(mpsc_console.flags & CON_ENABLED))
|
||
|
register_console(&mpsc_console);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
late_initcall(mpsc_late_console_init);
|
||
|
|
||
|
#define MPSC_CONSOLE &mpsc_console
|
||
|
#else
|
||
|
#define MPSC_CONSOLE NULL
|
||
|
#endif
|
||
|
/*
|
||
|
******************************************************************************
|
||
|
*
|
||
|
* Dummy Platform Driver to extract & map shared register regions
|
||
|
*
|
||
|
******************************************************************************
|
||
|
*/
|
||
|
static void
|
||
|
mpsc_resource_err(char *s)
|
||
|
{
|
||
|
printk(KERN_WARNING "MPSC: Platform device resource error in %s\n", s);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
mpsc_shared_map_regs(struct platform_device *pd)
|
||
|
{
|
||
|
struct resource *r;
|
||
|
|
||
|
if ((r = platform_get_resource(pd, IORESOURCE_MEM,
|
||
|
MPSC_ROUTING_BASE_ORDER)) && request_mem_region(r->start,
|
||
|
MPSC_ROUTING_REG_BLOCK_SIZE, "mpsc_routing_regs")) {
|
||
|
|
||
|
mpsc_shared_regs.mpsc_routing_base = ioremap(r->start,
|
||
|
MPSC_ROUTING_REG_BLOCK_SIZE);
|
||
|
mpsc_shared_regs.mpsc_routing_base_p = r->start;
|
||
|
}
|
||
|
else {
|
||
|
mpsc_resource_err("MPSC routing base");
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
|
||
|
if ((r = platform_get_resource(pd, IORESOURCE_MEM,
|
||
|
MPSC_SDMA_INTR_BASE_ORDER)) && request_mem_region(r->start,
|
||
|
MPSC_SDMA_INTR_REG_BLOCK_SIZE, "sdma_intr_regs")) {
|
||
|
|
||
|
mpsc_shared_regs.sdma_intr_base = ioremap(r->start,
|
||
|
MPSC_SDMA_INTR_REG_BLOCK_SIZE);
|
||
|
mpsc_shared_regs.sdma_intr_base_p = r->start;
|
||
|
}
|
||
|
else {
|
||
|
iounmap(mpsc_shared_regs.mpsc_routing_base);
|
||
|
release_mem_region(mpsc_shared_regs.mpsc_routing_base_p,
|
||
|
MPSC_ROUTING_REG_BLOCK_SIZE);
|
||
|
mpsc_resource_err("SDMA intr base");
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
mpsc_shared_unmap_regs(void)
|
||
|
{
|
||
|
if (!mpsc_shared_regs.mpsc_routing_base) {
|
||
|
iounmap(mpsc_shared_regs.mpsc_routing_base);
|
||
|
release_mem_region(mpsc_shared_regs.mpsc_routing_base_p,
|
||
|
MPSC_ROUTING_REG_BLOCK_SIZE);
|
||
|
}
|
||
|
if (!mpsc_shared_regs.sdma_intr_base) {
|
||
|
iounmap(mpsc_shared_regs.sdma_intr_base);
|
||
|
release_mem_region(mpsc_shared_regs.sdma_intr_base_p,
|
||
|
MPSC_SDMA_INTR_REG_BLOCK_SIZE);
|
||
|
}
|
||
|
|
||
|
mpsc_shared_regs.mpsc_routing_base = 0;
|
||
|
mpsc_shared_regs.sdma_intr_base = 0;
|
||
|
|
||
|
mpsc_shared_regs.mpsc_routing_base_p = 0;
|
||
|
mpsc_shared_regs.sdma_intr_base_p = 0;
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
mpsc_shared_drv_probe(struct device *dev)
|
||
|
{
|
||
|
struct platform_device *pd = to_platform_device(dev);
|
||
|
struct mpsc_shared_pdata *pdata;
|
||
|
int rc = -ENODEV;
|
||
|
|
||
|
if (pd->id == 0) {
|
||
|
if (!(rc = mpsc_shared_map_regs(pd))) {
|
||
|
pdata = (struct mpsc_shared_pdata *)dev->platform_data;
|
||
|
|
||
|
mpsc_shared_regs.MPSC_MRR_m = pdata->mrr_val;
|
||
|
mpsc_shared_regs.MPSC_RCRR_m= pdata->rcrr_val;
|
||
|
mpsc_shared_regs.MPSC_TCRR_m= pdata->tcrr_val;
|
||
|
mpsc_shared_regs.SDMA_INTR_CAUSE_m =
|
||
|
pdata->intr_cause_val;
|
||
|
mpsc_shared_regs.SDMA_INTR_MASK_m =
|
||
|
pdata->intr_mask_val;
|
||
|
|
||
|
rc = 0;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
mpsc_shared_drv_remove(struct device *dev)
|
||
|
{
|
||
|
struct platform_device *pd = to_platform_device(dev);
|
||
|
int rc = -ENODEV;
|
||
|
|
||
|
if (pd->id == 0) {
|
||
|
mpsc_shared_unmap_regs();
|
||
|
mpsc_shared_regs.MPSC_MRR_m = 0;
|
||
|
mpsc_shared_regs.MPSC_RCRR_m = 0;
|
||
|
mpsc_shared_regs.MPSC_TCRR_m = 0;
|
||
|
mpsc_shared_regs.SDMA_INTR_CAUSE_m = 0;
|
||
|
mpsc_shared_regs.SDMA_INTR_MASK_m = 0;
|
||
|
rc = 0;
|
||
|
}
|
||
|
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
static struct device_driver mpsc_shared_driver = {
|
||
|
.name = MPSC_SHARED_NAME,
|
||
|
.bus = &platform_bus_type,
|
||
|
.probe = mpsc_shared_drv_probe,
|
||
|
.remove = mpsc_shared_drv_remove,
|
||
|
};
|
||
|
|
||
|
/*
|
||
|
******************************************************************************
|
||
|
*
|
||
|
* Driver Interface Routines
|
||
|
*
|
||
|
******************************************************************************
|
||
|
*/
|
||
|
static struct uart_driver mpsc_reg = {
|
||
|
.owner = THIS_MODULE,
|
||
|
.driver_name = MPSC_DRIVER_NAME,
|
||
|
.devfs_name = MPSC_DEVFS_NAME,
|
||
|
.dev_name = MPSC_DEV_NAME,
|
||
|
.major = MPSC_MAJOR,
|
||
|
.minor = MPSC_MINOR_START,
|
||
|
.nr = MPSC_NUM_CTLRS,
|
||
|
.cons = MPSC_CONSOLE,
|
||
|
};
|
||
|
|
||
|
static int
|
||
|
mpsc_drv_map_regs(struct mpsc_port_info *pi, struct platform_device *pd)
|
||
|
{
|
||
|
struct resource *r;
|
||
|
|
||
|
if ((r = platform_get_resource(pd, IORESOURCE_MEM, MPSC_BASE_ORDER)) &&
|
||
|
request_mem_region(r->start, MPSC_REG_BLOCK_SIZE, "mpsc_regs")){
|
||
|
|
||
|
pi->mpsc_base = ioremap(r->start, MPSC_REG_BLOCK_SIZE);
|
||
|
pi->mpsc_base_p = r->start;
|
||
|
}
|
||
|
else {
|
||
|
mpsc_resource_err("MPSC base");
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
|
||
|
if ((r = platform_get_resource(pd, IORESOURCE_MEM,
|
||
|
MPSC_SDMA_BASE_ORDER)) && request_mem_region(r->start,
|
||
|
MPSC_SDMA_REG_BLOCK_SIZE, "sdma_regs")) {
|
||
|
|
||
|
pi->sdma_base = ioremap(r->start,MPSC_SDMA_REG_BLOCK_SIZE);
|
||
|
pi->sdma_base_p = r->start;
|
||
|
}
|
||
|
else {
|
||
|
mpsc_resource_err("SDMA base");
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
|
||
|
if ((r = platform_get_resource(pd,IORESOURCE_MEM,MPSC_BRG_BASE_ORDER))
|
||
|
&& request_mem_region(r->start, MPSC_BRG_REG_BLOCK_SIZE,
|
||
|
"brg_regs")) {
|
||
|
|
||
|
pi->brg_base = ioremap(r->start, MPSC_BRG_REG_BLOCK_SIZE);
|
||
|
pi->brg_base_p = r->start;
|
||
|
}
|
||
|
else {
|
||
|
mpsc_resource_err("BRG base");
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
mpsc_drv_unmap_regs(struct mpsc_port_info *pi)
|
||
|
{
|
||
|
if (!pi->mpsc_base) {
|
||
|
iounmap(pi->mpsc_base);
|
||
|
release_mem_region(pi->mpsc_base_p, MPSC_REG_BLOCK_SIZE);
|
||
|
}
|
||
|
if (!pi->sdma_base) {
|
||
|
iounmap(pi->sdma_base);
|
||
|
release_mem_region(pi->sdma_base_p, MPSC_SDMA_REG_BLOCK_SIZE);
|
||
|
}
|
||
|
if (!pi->brg_base) {
|
||
|
iounmap(pi->brg_base);
|
||
|
release_mem_region(pi->brg_base_p, MPSC_BRG_REG_BLOCK_SIZE);
|
||
|
}
|
||
|
|
||
|
pi->mpsc_base = 0;
|
||
|
pi->sdma_base = 0;
|
||
|
pi->brg_base = 0;
|
||
|
|
||
|
pi->mpsc_base_p = 0;
|
||
|
pi->sdma_base_p = 0;
|
||
|
pi->brg_base_p = 0;
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static void
|
||
|
mpsc_drv_get_platform_data(struct mpsc_port_info *pi,
|
||
|
struct platform_device *pd, int num)
|
||
|
{
|
||
|
struct mpsc_pdata *pdata;
|
||
|
|
||
|
pdata = (struct mpsc_pdata *)pd->dev.platform_data;
|
||
|
|
||
|
pi->port.uartclk = pdata->brg_clk_freq;
|
||
|
pi->port.iotype = UPIO_MEM;
|
||
|
pi->port.line = num;
|
||
|
pi->port.type = PORT_MPSC;
|
||
|
pi->port.fifosize = MPSC_TXBE_SIZE;
|
||
|
pi->port.membase = pi->mpsc_base;
|
||
|
pi->port.mapbase = (ulong)pi->mpsc_base;
|
||
|
pi->port.ops = &mpsc_pops;
|
||
|
|
||
|
pi->mirror_regs = pdata->mirror_regs;
|
||
|
pi->cache_mgmt = pdata->cache_mgmt;
|
||
|
pi->brg_can_tune = pdata->brg_can_tune;
|
||
|
pi->brg_clk_src = pdata->brg_clk_src;
|
||
|
pi->mpsc_max_idle = pdata->max_idle;
|
||
|
pi->default_baud = pdata->default_baud;
|
||
|
pi->default_bits = pdata->default_bits;
|
||
|
pi->default_parity = pdata->default_parity;
|
||
|
pi->default_flow = pdata->default_flow;
|
||
|
|
||
|
/* Initial values of mirrored regs */
|
||
|
pi->MPSC_CHR_1_m = pdata->chr_1_val;
|
||
|
pi->MPSC_CHR_2_m = pdata->chr_2_val;
|
||
|
pi->MPSC_CHR_10_m = pdata->chr_10_val;
|
||
|
pi->MPSC_MPCR_m = pdata->mpcr_val;
|
||
|
pi->BRG_BCR_m = pdata->bcr_val;
|
||
|
|
||
|
pi->shared_regs = &mpsc_shared_regs;
|
||
|
|
||
|
pi->port.irq = platform_get_irq(pd, 0);
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
mpsc_drv_probe(struct device *dev)
|
||
|
{
|
||
|
struct platform_device *pd = to_platform_device(dev);
|
||
|
struct mpsc_port_info *pi;
|
||
|
int rc = -ENODEV;
|
||
|
|
||
|
pr_debug("mpsc_drv_probe: Adding MPSC %d\n", pd->id);
|
||
|
|
||
|
if (pd->id < MPSC_NUM_CTLRS) {
|
||
|
pi = &mpsc_ports[pd->id];
|
||
|
|
||
|
if (!(rc = mpsc_drv_map_regs(pi, pd))) {
|
||
|
mpsc_drv_get_platform_data(pi, pd, pd->id);
|
||
|
|
||
|
if (!(rc = mpsc_make_ready(pi)))
|
||
|
if (!(rc = uart_add_one_port(&mpsc_reg,
|
||
|
&pi->port)))
|
||
|
rc = 0;
|
||
|
else {
|
||
|
mpsc_release_port(
|
||
|
(struct uart_port *)pi);
|
||
|
mpsc_drv_unmap_regs(pi);
|
||
|
}
|
||
|
else
|
||
|
mpsc_drv_unmap_regs(pi);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
mpsc_drv_remove(struct device *dev)
|
||
|
{
|
||
|
struct platform_device *pd = to_platform_device(dev);
|
||
|
|
||
|
pr_debug("mpsc_drv_exit: Removing MPSC %d\n", pd->id);
|
||
|
|
||
|
if (pd->id < MPSC_NUM_CTLRS) {
|
||
|
uart_remove_one_port(&mpsc_reg, &mpsc_ports[pd->id].port);
|
||
|
mpsc_release_port((struct uart_port *)&mpsc_ports[pd->id].port);
|
||
|
mpsc_drv_unmap_regs(&mpsc_ports[pd->id]);
|
||
|
return 0;
|
||
|
}
|
||
|
else
|
||
|
return -ENODEV;
|
||
|
}
|
||
|
|
||
|
static struct device_driver mpsc_driver = {
|
||
|
.name = MPSC_CTLR_NAME,
|
||
|
.bus = &platform_bus_type,
|
||
|
.probe = mpsc_drv_probe,
|
||
|
.remove = mpsc_drv_remove,
|
||
|
};
|
||
|
|
||
|
static int __init
|
||
|
mpsc_drv_init(void)
|
||
|
{
|
||
|
int rc;
|
||
|
|
||
|
printk(KERN_INFO "Serial: MPSC driver $Revision: 1.00 $\n");
|
||
|
|
||
|
memset(mpsc_ports, 0, sizeof(mpsc_ports));
|
||
|
memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
|
||
|
|
||
|
if (!(rc = uart_register_driver(&mpsc_reg))) {
|
||
|
if (!(rc = driver_register(&mpsc_shared_driver))) {
|
||
|
if ((rc = driver_register(&mpsc_driver))) {
|
||
|
driver_unregister(&mpsc_shared_driver);
|
||
|
uart_unregister_driver(&mpsc_reg);
|
||
|
}
|
||
|
}
|
||
|
else
|
||
|
uart_unregister_driver(&mpsc_reg);
|
||
|
}
|
||
|
|
||
|
return rc;
|
||
|
|
||
|
}
|
||
|
|
||
|
static void __exit
|
||
|
mpsc_drv_exit(void)
|
||
|
{
|
||
|
driver_unregister(&mpsc_driver);
|
||
|
driver_unregister(&mpsc_shared_driver);
|
||
|
uart_unregister_driver(&mpsc_reg);
|
||
|
memset(mpsc_ports, 0, sizeof(mpsc_ports));
|
||
|
memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
module_init(mpsc_drv_init);
|
||
|
module_exit(mpsc_drv_exit);
|
||
|
|
||
|
MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>");
|
||
|
MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver $Revision: 1.00 $");
|
||
|
MODULE_VERSION(MPSC_VERSION);
|
||
|
MODULE_LICENSE("GPL");
|
||
|
MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR);
|