kernel_optimize_test/drivers/mmc/host/meson-mx-sdio.c

779 lines
21 KiB
C
Raw Normal View History

mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs Add a driver for the SDIO/MMC host found on the Amlogic Meson SoCs. This is an MMC controller which provides an interface between the application processor and various memory cards. It supports the SD specification v2.0 and the eMMC specification v4.41. The controller provides an internal "mux" which allows connecting up to three MMC devices to it. Only one device can be used at a time though since the registers are shared across all devices. The driver takes care of synchronizing access (similar to the dw_mmc driver). The maximum supported bus-width is 4-bits. Amlogic's GPL kernel sources call the corresponding driver "aml_sdio" to differentiate it from the other MMC controller in (at least the Meson8 and Meson8b) the SoCs (they call the other drivers aml_sdhc and aml_sdhc_m8, which seem to support a bus-width of up to 8-bits). This means that there are three different MMC host controller IP blocks from Amlogic (each of them with completely own register layout and features): - "SDIO": 1 and 4 bit bus width, support for high-speed modes up to UHS-I SDR50, part of Meson6, Meson8 and Meson8b (the driver from this patch targets this controller) - "SDHC": 1, 4 and 8 bit bus width, compatible with standard iNAND interface, support for speeds up to HS200 and MMC spec up to version 4.5x, part of Meson8 and Meson8b SoCs (there is no mainline driver for this controller yet) - "SDEMMC": 1, 4 and 8 bit bus width, support for speeds up to HS400 and MMC spec up to version 5.0, part of the Meson GX (64-bit) SoCs (supported by the meson-gx MMC host driver) Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-03 19:24:17 +08:00
/*
* meson-mx-sdio.c - Meson6, Meson8 and Meson8b SDIO/MMC Host Controller
*
* Copyright (C) 2015 Endless Mobile, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
* Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/of_platform.h>
#include <linux/timer.h>
#include <linux/types.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
#include <linux/mmc/sdio.h>
#include <linux/mmc/slot-gpio.h>
#define MESON_MX_SDIO_ARGU 0x00
#define MESON_MX_SDIO_SEND 0x04
#define MESON_MX_SDIO_SEND_COMMAND_INDEX_MASK GENMASK(7, 0)
#define MESON_MX_SDIO_SEND_CMD_RESP_BITS_MASK GENMASK(15, 8)
#define MESON_MX_SDIO_SEND_RESP_WITHOUT_CRC7 BIT(16)
#define MESON_MX_SDIO_SEND_RESP_HAS_DATA BIT(17)
#define MESON_MX_SDIO_SEND_RESP_CRC7_FROM_8 BIT(18)
#define MESON_MX_SDIO_SEND_CHECK_DAT0_BUSY BIT(19)
#define MESON_MX_SDIO_SEND_DATA BIT(20)
#define MESON_MX_SDIO_SEND_USE_INT_WINDOW BIT(21)
#define MESON_MX_SDIO_SEND_REPEAT_PACKAGE_TIMES_MASK GENMASK(31, 24)
#define MESON_MX_SDIO_CONF 0x08
#define MESON_MX_SDIO_CONF_CMD_CLK_DIV_SHIFT 0
#define MESON_MX_SDIO_CONF_CMD_CLK_DIV_WIDTH 10
#define MESON_MX_SDIO_CONF_CMD_DISABLE_CRC BIT(10)
#define MESON_MX_SDIO_CONF_CMD_OUT_AT_POSITIVE_EDGE BIT(11)
#define MESON_MX_SDIO_CONF_CMD_ARGUMENT_BITS_MASK GENMASK(17, 12)
#define MESON_MX_SDIO_CONF_RESP_LATCH_AT_NEGATIVE_EDGE BIT(18)
#define MESON_MX_SDIO_CONF_DATA_LATCH_AT_NEGATIVE_EDGE BIT(19)
#define MESON_MX_SDIO_CONF_BUS_WIDTH BIT(20)
#define MESON_MX_SDIO_CONF_M_ENDIAN_MASK GENMASK(22, 21)
#define MESON_MX_SDIO_CONF_WRITE_NWR_MASK GENMASK(28, 23)
#define MESON_MX_SDIO_CONF_WRITE_CRC_OK_STATUS_MASK GENMASK(31, 29)
#define MESON_MX_SDIO_IRQS 0x0c
#define MESON_MX_SDIO_IRQS_STATUS_STATE_MACHINE_MASK GENMASK(3, 0)
#define MESON_MX_SDIO_IRQS_CMD_BUSY BIT(4)
#define MESON_MX_SDIO_IRQS_RESP_CRC7_OK BIT(5)
#define MESON_MX_SDIO_IRQS_DATA_READ_CRC16_OK BIT(6)
#define MESON_MX_SDIO_IRQS_DATA_WRITE_CRC16_OK BIT(7)
#define MESON_MX_SDIO_IRQS_IF_INT BIT(8)
#define MESON_MX_SDIO_IRQS_CMD_INT BIT(9)
#define MESON_MX_SDIO_IRQS_STATUS_INFO_MASK GENMASK(15, 12)
#define MESON_MX_SDIO_IRQS_TIMING_OUT_INT BIT(16)
#define MESON_MX_SDIO_IRQS_AMRISC_TIMING_OUT_INT_EN BIT(17)
#define MESON_MX_SDIO_IRQS_ARC_TIMING_OUT_INT_EN BIT(18)
#define MESON_MX_SDIO_IRQS_TIMING_OUT_COUNT_MASK GENMASK(31, 19)
#define MESON_MX_SDIO_IRQC 0x10
#define MESON_MX_SDIO_IRQC_ARC_IF_INT_EN BIT(3)
#define MESON_MX_SDIO_IRQC_ARC_CMD_INT_EN BIT(4)
#define MESON_MX_SDIO_IRQC_IF_CONFIG_MASK GENMASK(7, 6)
#define MESON_MX_SDIO_IRQC_FORCE_DATA_CLK BIT(8)
#define MESON_MX_SDIO_IRQC_FORCE_DATA_CMD BIT(9)
#define MESON_MX_SDIO_IRQC_FORCE_DATA_DAT_MASK GENMASK(10, 13)
#define MESON_MX_SDIO_IRQC_SOFT_RESET BIT(15)
#define MESON_MX_SDIO_IRQC_FORCE_HALT BIT(30)
#define MESON_MX_SDIO_IRQC_HALT_HOLE BIT(31)
#define MESON_MX_SDIO_MULT 0x14
#define MESON_MX_SDIO_MULT_PORT_SEL_MASK GENMASK(1, 0)
#define MESON_MX_SDIO_MULT_MEMORY_STICK_ENABLE BIT(2)
#define MESON_MX_SDIO_MULT_MEMORY_STICK_SCLK_ALWAYS BIT(3)
#define MESON_MX_SDIO_MULT_STREAM_ENABLE BIT(4)
#define MESON_MX_SDIO_MULT_STREAM_8BITS_MODE BIT(5)
#define MESON_MX_SDIO_MULT_WR_RD_OUT_INDEX BIT(8)
#define MESON_MX_SDIO_MULT_DAT0_DAT1_SWAPPED BIT(10)
#define MESON_MX_SDIO_MULT_DAT1_DAT0_SWAPPED BIT(11)
#define MESON_MX_SDIO_MULT_RESP_READ_INDEX_MASK GENMASK(15, 12)
#define MESON_MX_SDIO_ADDR 0x18
#define MESON_MX_SDIO_EXT 0x1c
#define MESON_MX_SDIO_EXT_DATA_RW_NUMBER_MASK GENMASK(29, 16)
#define MESON_MX_SDIO_BOUNCE_REQ_SIZE (128 * 1024)
#define MESON_MX_SDIO_RESPONSE_CRC16_BITS (16 - 1)
#define MESON_MX_SDIO_MAX_SLOTS 3
struct meson_mx_mmc_host {
struct device *controller_dev;
struct clk *parent_clk;
struct clk *core_clk;
struct clk_divider cfg_div;
struct clk *cfg_div_clk;
struct clk_fixed_factor fixed_factor;
struct clk *fixed_factor_clk;
void __iomem *base;
int irq;
spinlock_t irq_lock;
struct timer_list cmd_timeout;
unsigned int slot_id;
struct mmc_host *mmc;
struct mmc_request *mrq;
struct mmc_command *cmd;
int error;
};
static void meson_mx_mmc_mask_bits(struct mmc_host *mmc, char reg, u32 mask,
u32 val)
{
struct meson_mx_mmc_host *host = mmc_priv(mmc);
u32 regval;
regval = readl(host->base + reg);
regval &= ~mask;
regval |= (val & mask);
writel(regval, host->base + reg);
}
static void meson_mx_mmc_soft_reset(struct meson_mx_mmc_host *host)
{
writel(MESON_MX_SDIO_IRQC_SOFT_RESET, host->base + MESON_MX_SDIO_IRQC);
udelay(2);
}
static struct mmc_command *meson_mx_mmc_get_next_cmd(struct mmc_command *cmd)
{
if (cmd->opcode == MMC_SET_BLOCK_COUNT && !cmd->error)
return cmd->mrq->cmd;
else if (mmc_op_multi(cmd->opcode) &&
(!cmd->mrq->sbc || cmd->error || cmd->data->error))
return cmd->mrq->stop;
else
return NULL;
}
static void meson_mx_mmc_start_cmd(struct mmc_host *mmc,
struct mmc_command *cmd)
{
struct meson_mx_mmc_host *host = mmc_priv(mmc);
unsigned int pack_size;
unsigned long irqflags, timeout;
u32 mult, send = 0, ext = 0;
host->cmd = cmd;
if (cmd->busy_timeout)
timeout = msecs_to_jiffies(cmd->busy_timeout);
else
timeout = msecs_to_jiffies(1000);
switch (mmc_resp_type(cmd)) {
case MMC_RSP_R1:
case MMC_RSP_R1B:
case MMC_RSP_R3:
/* 7 (CMD) + 32 (response) + 7 (CRC) -1 */
send |= FIELD_PREP(MESON_MX_SDIO_SEND_CMD_RESP_BITS_MASK, 45);
break;
case MMC_RSP_R2:
/* 7 (CMD) + 120 (response) + 7 (CRC) -1 */
send |= FIELD_PREP(MESON_MX_SDIO_SEND_CMD_RESP_BITS_MASK, 133);
send |= MESON_MX_SDIO_SEND_RESP_CRC7_FROM_8;
break;
default:
break;
}
if (!(cmd->flags & MMC_RSP_CRC))
send |= MESON_MX_SDIO_SEND_RESP_WITHOUT_CRC7;
if (cmd->flags & MMC_RSP_BUSY)
send |= MESON_MX_SDIO_SEND_CHECK_DAT0_BUSY;
if (cmd->data) {
send |= FIELD_PREP(MESON_MX_SDIO_SEND_REPEAT_PACKAGE_TIMES_MASK,
(cmd->data->blocks - 1));
pack_size = cmd->data->blksz * BITS_PER_BYTE;
if (mmc->ios.bus_width == MMC_BUS_WIDTH_4)
pack_size += MESON_MX_SDIO_RESPONSE_CRC16_BITS * 4;
else
pack_size += MESON_MX_SDIO_RESPONSE_CRC16_BITS * 1;
ext |= FIELD_PREP(MESON_MX_SDIO_EXT_DATA_RW_NUMBER_MASK,
pack_size);
if (cmd->data->flags & MMC_DATA_WRITE)
send |= MESON_MX_SDIO_SEND_DATA;
else
send |= MESON_MX_SDIO_SEND_RESP_HAS_DATA;
cmd->data->bytes_xfered = 0;
}
send |= FIELD_PREP(MESON_MX_SDIO_SEND_COMMAND_INDEX_MASK,
(0x40 | cmd->opcode));
spin_lock_irqsave(&host->irq_lock, irqflags);
mult = readl(host->base + MESON_MX_SDIO_MULT);
mult &= ~MESON_MX_SDIO_MULT_PORT_SEL_MASK;
mult |= FIELD_PREP(MESON_MX_SDIO_MULT_PORT_SEL_MASK, host->slot_id);
mult |= BIT(31);
writel(mult, host->base + MESON_MX_SDIO_MULT);
/* enable the CMD done interrupt */
meson_mx_mmc_mask_bits(mmc, MESON_MX_SDIO_IRQC,
MESON_MX_SDIO_IRQC_ARC_CMD_INT_EN,
MESON_MX_SDIO_IRQC_ARC_CMD_INT_EN);
/* clear pending interrupts */
meson_mx_mmc_mask_bits(mmc, MESON_MX_SDIO_IRQS,
MESON_MX_SDIO_IRQS_CMD_INT,
MESON_MX_SDIO_IRQS_CMD_INT);
writel(cmd->arg, host->base + MESON_MX_SDIO_ARGU);
writel(ext, host->base + MESON_MX_SDIO_EXT);
writel(send, host->base + MESON_MX_SDIO_SEND);
spin_unlock_irqrestore(&host->irq_lock, irqflags);
mod_timer(&host->cmd_timeout, jiffies + timeout);
}
static void meson_mx_mmc_request_done(struct meson_mx_mmc_host *host)
{
struct mmc_request *mrq;
mrq = host->mrq;
host->mrq = NULL;
host->cmd = NULL;
mmc_request_done(host->mmc, mrq);
}
static void meson_mx_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct meson_mx_mmc_host *host = mmc_priv(mmc);
unsigned short vdd = ios->vdd;
unsigned long clk_rate = ios->clock;
switch (ios->bus_width) {
case MMC_BUS_WIDTH_1:
meson_mx_mmc_mask_bits(mmc, MESON_MX_SDIO_CONF,
MESON_MX_SDIO_CONF_BUS_WIDTH, 0);
break;
case MMC_BUS_WIDTH_4:
meson_mx_mmc_mask_bits(mmc, MESON_MX_SDIO_CONF,
MESON_MX_SDIO_CONF_BUS_WIDTH,
MESON_MX_SDIO_CONF_BUS_WIDTH);
break;
case MMC_BUS_WIDTH_8:
default:
dev_err(mmc_dev(mmc), "unsupported bus width: %d\n",
ios->bus_width);
host->error = -EINVAL;
return;
}
host->error = clk_set_rate(host->cfg_div_clk, ios->clock);
if (host->error) {
dev_warn(mmc_dev(mmc),
"failed to set MMC clock to %lu: %d\n",
clk_rate, host->error);
return;
}
mmc->actual_clock = clk_get_rate(host->cfg_div_clk);
switch (ios->power_mode) {
case MMC_POWER_OFF:
vdd = 0;
/* fall through */
mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs Add a driver for the SDIO/MMC host found on the Amlogic Meson SoCs. This is an MMC controller which provides an interface between the application processor and various memory cards. It supports the SD specification v2.0 and the eMMC specification v4.41. The controller provides an internal "mux" which allows connecting up to three MMC devices to it. Only one device can be used at a time though since the registers are shared across all devices. The driver takes care of synchronizing access (similar to the dw_mmc driver). The maximum supported bus-width is 4-bits. Amlogic's GPL kernel sources call the corresponding driver "aml_sdio" to differentiate it from the other MMC controller in (at least the Meson8 and Meson8b) the SoCs (they call the other drivers aml_sdhc and aml_sdhc_m8, which seem to support a bus-width of up to 8-bits). This means that there are three different MMC host controller IP blocks from Amlogic (each of them with completely own register layout and features): - "SDIO": 1 and 4 bit bus width, support for high-speed modes up to UHS-I SDR50, part of Meson6, Meson8 and Meson8b (the driver from this patch targets this controller) - "SDHC": 1, 4 and 8 bit bus width, compatible with standard iNAND interface, support for speeds up to HS200 and MMC spec up to version 4.5x, part of Meson8 and Meson8b SoCs (there is no mainline driver for this controller yet) - "SDEMMC": 1, 4 and 8 bit bus width, support for speeds up to HS400 and MMC spec up to version 5.0, part of the Meson GX (64-bit) SoCs (supported by the meson-gx MMC host driver) Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-03 19:24:17 +08:00
case MMC_POWER_UP:
if (!IS_ERR(mmc->supply.vmmc)) {
host->error = mmc_regulator_set_ocr(mmc,
mmc->supply.vmmc,
vdd);
if (host->error)
return;
}
break;
}
}
static int meson_mx_mmc_map_dma(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct mmc_data *data = mrq->data;
int dma_len;
struct scatterlist *sg;
if (!data)
return 0;
sg = data->sg;
if (sg->offset & 3 || sg->length & 3) {
dev_err(mmc_dev(mmc),
"unaligned scatterlist: offset %x length %d\n",
sg->offset, sg->length);
return -EINVAL;
}
dma_len = dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len,
mmc_get_dma_dir(data));
if (dma_len <= 0) {
dev_err(mmc_dev(mmc), "dma_map_sg failed\n");
return -ENOMEM;
}
return 0;
}
static void meson_mx_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct meson_mx_mmc_host *host = mmc_priv(mmc);
struct mmc_command *cmd = mrq->cmd;
if (!host->error)
host->error = meson_mx_mmc_map_dma(mmc, mrq);
if (host->error) {
cmd->error = host->error;
mmc_request_done(mmc, mrq);
return;
}
host->mrq = mrq;
if (mrq->data)
writel(sg_dma_address(mrq->data->sg),
host->base + MESON_MX_SDIO_ADDR);
if (mrq->sbc)
meson_mx_mmc_start_cmd(mmc, mrq->sbc);
else
meson_mx_mmc_start_cmd(mmc, mrq->cmd);
}
static int meson_mx_mmc_card_busy(struct mmc_host *mmc)
{
struct meson_mx_mmc_host *host = mmc_priv(mmc);
u32 irqc = readl(host->base + MESON_MX_SDIO_IRQC);
return !!(irqc & MESON_MX_SDIO_IRQC_FORCE_DATA_DAT_MASK);
}
static void meson_mx_mmc_read_response(struct mmc_host *mmc,
struct mmc_command *cmd)
{
struct meson_mx_mmc_host *host = mmc_priv(mmc);
u32 mult;
int i, resp[4];
mult = readl(host->base + MESON_MX_SDIO_MULT);
mult |= MESON_MX_SDIO_MULT_WR_RD_OUT_INDEX;
mult &= ~MESON_MX_SDIO_MULT_RESP_READ_INDEX_MASK;
mult |= FIELD_PREP(MESON_MX_SDIO_MULT_RESP_READ_INDEX_MASK, 0);
writel(mult, host->base + MESON_MX_SDIO_MULT);
if (cmd->flags & MMC_RSP_136) {
for (i = 0; i <= 3; i++)
resp[3 - i] = readl(host->base + MESON_MX_SDIO_ARGU);
cmd->resp[0] = (resp[0] << 8) | ((resp[1] >> 24) & 0xff);
cmd->resp[1] = (resp[1] << 8) | ((resp[2] >> 24) & 0xff);
cmd->resp[2] = (resp[2] << 8) | ((resp[3] >> 24) & 0xff);
cmd->resp[3] = (resp[3] << 8);
} else if (cmd->flags & MMC_RSP_PRESENT) {
cmd->resp[0] = readl(host->base + MESON_MX_SDIO_ARGU);
}
}
static irqreturn_t meson_mx_mmc_process_cmd_irq(struct meson_mx_mmc_host *host,
u32 irqs, u32 send)
{
struct mmc_command *cmd = host->cmd;
/*
* NOTE: even though it shouldn't happen we sometimes get command
* interrupts twice (at least this is what it looks like). Ideally
* we find out why this happens and warn here as soon as it occurs.
*/
if (!cmd)
return IRQ_HANDLED;
cmd->error = 0;
meson_mx_mmc_read_response(host->mmc, cmd);
if (cmd->data) {
if (!((irqs & MESON_MX_SDIO_IRQS_DATA_READ_CRC16_OK) ||
(irqs & MESON_MX_SDIO_IRQS_DATA_WRITE_CRC16_OK)))
cmd->error = -EILSEQ;
} else {
if (!((irqs & MESON_MX_SDIO_IRQS_RESP_CRC7_OK) ||
(send & MESON_MX_SDIO_SEND_RESP_WITHOUT_CRC7)))
cmd->error = -EILSEQ;
}
return IRQ_WAKE_THREAD;
}
static irqreturn_t meson_mx_mmc_irq(int irq, void *data)
{
struct meson_mx_mmc_host *host = (void *) data;
u32 irqs, send;
unsigned long irqflags;
irqreturn_t ret;
spin_lock_irqsave(&host->irq_lock, irqflags);
irqs = readl(host->base + MESON_MX_SDIO_IRQS);
send = readl(host->base + MESON_MX_SDIO_SEND);
if (irqs & MESON_MX_SDIO_IRQS_CMD_INT)
ret = meson_mx_mmc_process_cmd_irq(host, irqs, send);
else
ret = IRQ_HANDLED;
/* finally ACK all pending interrupts */
writel(irqs, host->base + MESON_MX_SDIO_IRQS);
spin_unlock_irqrestore(&host->irq_lock, irqflags);
return ret;
}
static irqreturn_t meson_mx_mmc_irq_thread(int irq, void *irq_data)
{
struct meson_mx_mmc_host *host = (void *) irq_data;
struct mmc_command *cmd = host->cmd, *next_cmd;
if (WARN_ON(!cmd))
return IRQ_HANDLED;
del_timer_sync(&host->cmd_timeout);
if (cmd->data) {
dma_unmap_sg(mmc_dev(host->mmc), cmd->data->sg,
cmd->data->sg_len,
mmc_get_dma_dir(cmd->data));
cmd->data->bytes_xfered = cmd->data->blksz * cmd->data->blocks;
}
next_cmd = meson_mx_mmc_get_next_cmd(cmd);
if (next_cmd)
meson_mx_mmc_start_cmd(host->mmc, next_cmd);
else
meson_mx_mmc_request_done(host);
return IRQ_HANDLED;
}
static void meson_mx_mmc_timeout(struct timer_list *t)
mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs Add a driver for the SDIO/MMC host found on the Amlogic Meson SoCs. This is an MMC controller which provides an interface between the application processor and various memory cards. It supports the SD specification v2.0 and the eMMC specification v4.41. The controller provides an internal "mux" which allows connecting up to three MMC devices to it. Only one device can be used at a time though since the registers are shared across all devices. The driver takes care of synchronizing access (similar to the dw_mmc driver). The maximum supported bus-width is 4-bits. Amlogic's GPL kernel sources call the corresponding driver "aml_sdio" to differentiate it from the other MMC controller in (at least the Meson8 and Meson8b) the SoCs (they call the other drivers aml_sdhc and aml_sdhc_m8, which seem to support a bus-width of up to 8-bits). This means that there are three different MMC host controller IP blocks from Amlogic (each of them with completely own register layout and features): - "SDIO": 1 and 4 bit bus width, support for high-speed modes up to UHS-I SDR50, part of Meson6, Meson8 and Meson8b (the driver from this patch targets this controller) - "SDHC": 1, 4 and 8 bit bus width, compatible with standard iNAND interface, support for speeds up to HS200 and MMC spec up to version 4.5x, part of Meson8 and Meson8b SoCs (there is no mainline driver for this controller yet) - "SDEMMC": 1, 4 and 8 bit bus width, support for speeds up to HS400 and MMC spec up to version 5.0, part of the Meson GX (64-bit) SoCs (supported by the meson-gx MMC host driver) Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-03 19:24:17 +08:00
{
struct meson_mx_mmc_host *host = from_timer(host, t, cmd_timeout);
mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs Add a driver for the SDIO/MMC host found on the Amlogic Meson SoCs. This is an MMC controller which provides an interface between the application processor and various memory cards. It supports the SD specification v2.0 and the eMMC specification v4.41. The controller provides an internal "mux" which allows connecting up to three MMC devices to it. Only one device can be used at a time though since the registers are shared across all devices. The driver takes care of synchronizing access (similar to the dw_mmc driver). The maximum supported bus-width is 4-bits. Amlogic's GPL kernel sources call the corresponding driver "aml_sdio" to differentiate it from the other MMC controller in (at least the Meson8 and Meson8b) the SoCs (they call the other drivers aml_sdhc and aml_sdhc_m8, which seem to support a bus-width of up to 8-bits). This means that there are three different MMC host controller IP blocks from Amlogic (each of them with completely own register layout and features): - "SDIO": 1 and 4 bit bus width, support for high-speed modes up to UHS-I SDR50, part of Meson6, Meson8 and Meson8b (the driver from this patch targets this controller) - "SDHC": 1, 4 and 8 bit bus width, compatible with standard iNAND interface, support for speeds up to HS200 and MMC spec up to version 4.5x, part of Meson8 and Meson8b SoCs (there is no mainline driver for this controller yet) - "SDEMMC": 1, 4 and 8 bit bus width, support for speeds up to HS400 and MMC spec up to version 5.0, part of the Meson GX (64-bit) SoCs (supported by the meson-gx MMC host driver) Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-03 19:24:17 +08:00
unsigned long irqflags;
u32 irqc;
spin_lock_irqsave(&host->irq_lock, irqflags);
/* disable the CMD interrupt */
irqc = readl(host->base + MESON_MX_SDIO_IRQC);
irqc &= ~MESON_MX_SDIO_IRQC_ARC_CMD_INT_EN;
writel(irqc, host->base + MESON_MX_SDIO_IRQC);
spin_unlock_irqrestore(&host->irq_lock, irqflags);
/*
* skip the timeout handling if the interrupt handler already processed
* the command.
*/
if (!host->cmd)
return;
dev_dbg(mmc_dev(host->mmc),
"Timeout on CMD%u (IRQS = 0x%08x, ARGU = 0x%08x)\n",
host->cmd->opcode, readl(host->base + MESON_MX_SDIO_IRQS),
readl(host->base + MESON_MX_SDIO_ARGU));
host->cmd->error = -ETIMEDOUT;
meson_mx_mmc_request_done(host);
}
static struct mmc_host_ops meson_mx_mmc_ops = {
.request = meson_mx_mmc_request,
.set_ios = meson_mx_mmc_set_ios,
.card_busy = meson_mx_mmc_card_busy,
.get_cd = mmc_gpio_get_cd,
.get_ro = mmc_gpio_get_ro,
};
static struct platform_device *meson_mx_mmc_slot_pdev(struct device *parent)
{
struct device_node *slot_node;
struct platform_device *pdev;
mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs Add a driver for the SDIO/MMC host found on the Amlogic Meson SoCs. This is an MMC controller which provides an interface between the application processor and various memory cards. It supports the SD specification v2.0 and the eMMC specification v4.41. The controller provides an internal "mux" which allows connecting up to three MMC devices to it. Only one device can be used at a time though since the registers are shared across all devices. The driver takes care of synchronizing access (similar to the dw_mmc driver). The maximum supported bus-width is 4-bits. Amlogic's GPL kernel sources call the corresponding driver "aml_sdio" to differentiate it from the other MMC controller in (at least the Meson8 and Meson8b) the SoCs (they call the other drivers aml_sdhc and aml_sdhc_m8, which seem to support a bus-width of up to 8-bits). This means that there are three different MMC host controller IP blocks from Amlogic (each of them with completely own register layout and features): - "SDIO": 1 and 4 bit bus width, support for high-speed modes up to UHS-I SDR50, part of Meson6, Meson8 and Meson8b (the driver from this patch targets this controller) - "SDHC": 1, 4 and 8 bit bus width, compatible with standard iNAND interface, support for speeds up to HS200 and MMC spec up to version 4.5x, part of Meson8 and Meson8b SoCs (there is no mainline driver for this controller yet) - "SDEMMC": 1, 4 and 8 bit bus width, support for speeds up to HS400 and MMC spec up to version 5.0, part of the Meson GX (64-bit) SoCs (supported by the meson-gx MMC host driver) Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-03 19:24:17 +08:00
/*
* TODO: the MMC core framework currently does not support
* controllers with multiple slots properly. So we only register
* the first slot for now
*/
slot_node = of_get_compatible_child(parent->of_node, "mmc-slot");
mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs Add a driver for the SDIO/MMC host found on the Amlogic Meson SoCs. This is an MMC controller which provides an interface between the application processor and various memory cards. It supports the SD specification v2.0 and the eMMC specification v4.41. The controller provides an internal "mux" which allows connecting up to three MMC devices to it. Only one device can be used at a time though since the registers are shared across all devices. The driver takes care of synchronizing access (similar to the dw_mmc driver). The maximum supported bus-width is 4-bits. Amlogic's GPL kernel sources call the corresponding driver "aml_sdio" to differentiate it from the other MMC controller in (at least the Meson8 and Meson8b) the SoCs (they call the other drivers aml_sdhc and aml_sdhc_m8, which seem to support a bus-width of up to 8-bits). This means that there are three different MMC host controller IP blocks from Amlogic (each of them with completely own register layout and features): - "SDIO": 1 and 4 bit bus width, support for high-speed modes up to UHS-I SDR50, part of Meson6, Meson8 and Meson8b (the driver from this patch targets this controller) - "SDHC": 1, 4 and 8 bit bus width, compatible with standard iNAND interface, support for speeds up to HS200 and MMC spec up to version 4.5x, part of Meson8 and Meson8b SoCs (there is no mainline driver for this controller yet) - "SDEMMC": 1, 4 and 8 bit bus width, support for speeds up to HS400 and MMC spec up to version 5.0, part of the Meson GX (64-bit) SoCs (supported by the meson-gx MMC host driver) Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-03 19:24:17 +08:00
if (!slot_node) {
dev_warn(parent, "no 'mmc-slot' sub-node found\n");
return ERR_PTR(-ENOENT);
}
pdev = of_platform_device_create(slot_node, NULL, parent);
of_node_put(slot_node);
return pdev;
mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs Add a driver for the SDIO/MMC host found on the Amlogic Meson SoCs. This is an MMC controller which provides an interface between the application processor and various memory cards. It supports the SD specification v2.0 and the eMMC specification v4.41. The controller provides an internal "mux" which allows connecting up to three MMC devices to it. Only one device can be used at a time though since the registers are shared across all devices. The driver takes care of synchronizing access (similar to the dw_mmc driver). The maximum supported bus-width is 4-bits. Amlogic's GPL kernel sources call the corresponding driver "aml_sdio" to differentiate it from the other MMC controller in (at least the Meson8 and Meson8b) the SoCs (they call the other drivers aml_sdhc and aml_sdhc_m8, which seem to support a bus-width of up to 8-bits). This means that there are three different MMC host controller IP blocks from Amlogic (each of them with completely own register layout and features): - "SDIO": 1 and 4 bit bus width, support for high-speed modes up to UHS-I SDR50, part of Meson6, Meson8 and Meson8b (the driver from this patch targets this controller) - "SDHC": 1, 4 and 8 bit bus width, compatible with standard iNAND interface, support for speeds up to HS200 and MMC spec up to version 4.5x, part of Meson8 and Meson8b SoCs (there is no mainline driver for this controller yet) - "SDEMMC": 1, 4 and 8 bit bus width, support for speeds up to HS400 and MMC spec up to version 5.0, part of the Meson GX (64-bit) SoCs (supported by the meson-gx MMC host driver) Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-03 19:24:17 +08:00
}
static int meson_mx_mmc_add_host(struct meson_mx_mmc_host *host)
{
struct mmc_host *mmc = host->mmc;
struct device *slot_dev = mmc_dev(mmc);
int ret;
if (of_property_read_u32(slot_dev->of_node, "reg", &host->slot_id)) {
dev_err(slot_dev, "missing 'reg' property\n");
return -EINVAL;
}
if (host->slot_id >= MESON_MX_SDIO_MAX_SLOTS) {
dev_err(slot_dev, "invalid 'reg' property value %d\n",
host->slot_id);
return -EINVAL;
}
/* Get regulators and the supported OCR mask */
ret = mmc_regulator_get_supply(mmc);
if (ret)
mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs Add a driver for the SDIO/MMC host found on the Amlogic Meson SoCs. This is an MMC controller which provides an interface between the application processor and various memory cards. It supports the SD specification v2.0 and the eMMC specification v4.41. The controller provides an internal "mux" which allows connecting up to three MMC devices to it. Only one device can be used at a time though since the registers are shared across all devices. The driver takes care of synchronizing access (similar to the dw_mmc driver). The maximum supported bus-width is 4-bits. Amlogic's GPL kernel sources call the corresponding driver "aml_sdio" to differentiate it from the other MMC controller in (at least the Meson8 and Meson8b) the SoCs (they call the other drivers aml_sdhc and aml_sdhc_m8, which seem to support a bus-width of up to 8-bits). This means that there are three different MMC host controller IP blocks from Amlogic (each of them with completely own register layout and features): - "SDIO": 1 and 4 bit bus width, support for high-speed modes up to UHS-I SDR50, part of Meson6, Meson8 and Meson8b (the driver from this patch targets this controller) - "SDHC": 1, 4 and 8 bit bus width, compatible with standard iNAND interface, support for speeds up to HS200 and MMC spec up to version 4.5x, part of Meson8 and Meson8b SoCs (there is no mainline driver for this controller yet) - "SDEMMC": 1, 4 and 8 bit bus width, support for speeds up to HS400 and MMC spec up to version 5.0, part of the Meson GX (64-bit) SoCs (supported by the meson-gx MMC host driver) Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-03 19:24:17 +08:00
return ret;
mmc->max_req_size = MESON_MX_SDIO_BOUNCE_REQ_SIZE;
mmc->max_seg_size = mmc->max_req_size;
mmc->max_blk_count =
FIELD_GET(MESON_MX_SDIO_SEND_REPEAT_PACKAGE_TIMES_MASK,
0xffffffff);
mmc->max_blk_size = FIELD_GET(MESON_MX_SDIO_EXT_DATA_RW_NUMBER_MASK,
0xffffffff);
mmc->max_blk_size -= (4 * MESON_MX_SDIO_RESPONSE_CRC16_BITS);
mmc->max_blk_size /= BITS_PER_BYTE;
/* Get the min and max supported clock rates */
mmc->f_min = clk_round_rate(host->cfg_div_clk, 1);
mmc->f_max = clk_round_rate(host->cfg_div_clk,
clk_get_rate(host->parent_clk));
mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
mmc->ops = &meson_mx_mmc_ops;
ret = mmc_of_parse(mmc);
if (ret)
return ret;
ret = mmc_add_host(mmc);
if (ret)
return ret;
return 0;
}
static int meson_mx_mmc_register_clks(struct meson_mx_mmc_host *host)
{
struct clk_init_data init;
const char *clk_div_parent, *clk_fixed_factor_parent;
clk_fixed_factor_parent = __clk_get_name(host->parent_clk);
init.name = devm_kasprintf(host->controller_dev, GFP_KERNEL,
"%s#fixed_factor",
dev_name(host->controller_dev));
if (!init.name)
return -ENOMEM;
mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs Add a driver for the SDIO/MMC host found on the Amlogic Meson SoCs. This is an MMC controller which provides an interface between the application processor and various memory cards. It supports the SD specification v2.0 and the eMMC specification v4.41. The controller provides an internal "mux" which allows connecting up to three MMC devices to it. Only one device can be used at a time though since the registers are shared across all devices. The driver takes care of synchronizing access (similar to the dw_mmc driver). The maximum supported bus-width is 4-bits. Amlogic's GPL kernel sources call the corresponding driver "aml_sdio" to differentiate it from the other MMC controller in (at least the Meson8 and Meson8b) the SoCs (they call the other drivers aml_sdhc and aml_sdhc_m8, which seem to support a bus-width of up to 8-bits). This means that there are three different MMC host controller IP blocks from Amlogic (each of them with completely own register layout and features): - "SDIO": 1 and 4 bit bus width, support for high-speed modes up to UHS-I SDR50, part of Meson6, Meson8 and Meson8b (the driver from this patch targets this controller) - "SDHC": 1, 4 and 8 bit bus width, compatible with standard iNAND interface, support for speeds up to HS200 and MMC spec up to version 4.5x, part of Meson8 and Meson8b SoCs (there is no mainline driver for this controller yet) - "SDEMMC": 1, 4 and 8 bit bus width, support for speeds up to HS400 and MMC spec up to version 5.0, part of the Meson GX (64-bit) SoCs (supported by the meson-gx MMC host driver) Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-03 19:24:17 +08:00
init.ops = &clk_fixed_factor_ops;
init.flags = 0;
init.parent_names = &clk_fixed_factor_parent;
init.num_parents = 1;
host->fixed_factor.div = 2;
host->fixed_factor.mult = 1;
host->fixed_factor.hw.init = &init;
host->fixed_factor_clk = devm_clk_register(host->controller_dev,
&host->fixed_factor.hw);
if (WARN_ON(IS_ERR(host->fixed_factor_clk)))
mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs Add a driver for the SDIO/MMC host found on the Amlogic Meson SoCs. This is an MMC controller which provides an interface between the application processor and various memory cards. It supports the SD specification v2.0 and the eMMC specification v4.41. The controller provides an internal "mux" which allows connecting up to three MMC devices to it. Only one device can be used at a time though since the registers are shared across all devices. The driver takes care of synchronizing access (similar to the dw_mmc driver). The maximum supported bus-width is 4-bits. Amlogic's GPL kernel sources call the corresponding driver "aml_sdio" to differentiate it from the other MMC controller in (at least the Meson8 and Meson8b) the SoCs (they call the other drivers aml_sdhc and aml_sdhc_m8, which seem to support a bus-width of up to 8-bits). This means that there are three different MMC host controller IP blocks from Amlogic (each of them with completely own register layout and features): - "SDIO": 1 and 4 bit bus width, support for high-speed modes up to UHS-I SDR50, part of Meson6, Meson8 and Meson8b (the driver from this patch targets this controller) - "SDHC": 1, 4 and 8 bit bus width, compatible with standard iNAND interface, support for speeds up to HS200 and MMC spec up to version 4.5x, part of Meson8 and Meson8b SoCs (there is no mainline driver for this controller yet) - "SDEMMC": 1, 4 and 8 bit bus width, support for speeds up to HS400 and MMC spec up to version 5.0, part of the Meson GX (64-bit) SoCs (supported by the meson-gx MMC host driver) Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-03 19:24:17 +08:00
return PTR_ERR(host->fixed_factor_clk);
clk_div_parent = __clk_get_name(host->fixed_factor_clk);
init.name = devm_kasprintf(host->controller_dev, GFP_KERNEL,
"%s#div", dev_name(host->controller_dev));
if (!init.name)
return -ENOMEM;
mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs Add a driver for the SDIO/MMC host found on the Amlogic Meson SoCs. This is an MMC controller which provides an interface between the application processor and various memory cards. It supports the SD specification v2.0 and the eMMC specification v4.41. The controller provides an internal "mux" which allows connecting up to three MMC devices to it. Only one device can be used at a time though since the registers are shared across all devices. The driver takes care of synchronizing access (similar to the dw_mmc driver). The maximum supported bus-width is 4-bits. Amlogic's GPL kernel sources call the corresponding driver "aml_sdio" to differentiate it from the other MMC controller in (at least the Meson8 and Meson8b) the SoCs (they call the other drivers aml_sdhc and aml_sdhc_m8, which seem to support a bus-width of up to 8-bits). This means that there are three different MMC host controller IP blocks from Amlogic (each of them with completely own register layout and features): - "SDIO": 1 and 4 bit bus width, support for high-speed modes up to UHS-I SDR50, part of Meson6, Meson8 and Meson8b (the driver from this patch targets this controller) - "SDHC": 1, 4 and 8 bit bus width, compatible with standard iNAND interface, support for speeds up to HS200 and MMC spec up to version 4.5x, part of Meson8 and Meson8b SoCs (there is no mainline driver for this controller yet) - "SDEMMC": 1, 4 and 8 bit bus width, support for speeds up to HS400 and MMC spec up to version 5.0, part of the Meson GX (64-bit) SoCs (supported by the meson-gx MMC host driver) Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-03 19:24:17 +08:00
init.ops = &clk_divider_ops;
init.flags = CLK_SET_RATE_PARENT;
init.parent_names = &clk_div_parent;
init.num_parents = 1;
host->cfg_div.reg = host->base + MESON_MX_SDIO_CONF;
host->cfg_div.shift = MESON_MX_SDIO_CONF_CMD_CLK_DIV_SHIFT;
host->cfg_div.width = MESON_MX_SDIO_CONF_CMD_CLK_DIV_WIDTH;
host->cfg_div.hw.init = &init;
host->cfg_div.flags = CLK_DIVIDER_ALLOW_ZERO;
host->cfg_div_clk = devm_clk_register(host->controller_dev,
&host->cfg_div.hw);
if (WARN_ON(IS_ERR(host->cfg_div_clk)))
return PTR_ERR(host->cfg_div_clk);
mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs Add a driver for the SDIO/MMC host found on the Amlogic Meson SoCs. This is an MMC controller which provides an interface between the application processor and various memory cards. It supports the SD specification v2.0 and the eMMC specification v4.41. The controller provides an internal "mux" which allows connecting up to three MMC devices to it. Only one device can be used at a time though since the registers are shared across all devices. The driver takes care of synchronizing access (similar to the dw_mmc driver). The maximum supported bus-width is 4-bits. Amlogic's GPL kernel sources call the corresponding driver "aml_sdio" to differentiate it from the other MMC controller in (at least the Meson8 and Meson8b) the SoCs (they call the other drivers aml_sdhc and aml_sdhc_m8, which seem to support a bus-width of up to 8-bits). This means that there are three different MMC host controller IP blocks from Amlogic (each of them with completely own register layout and features): - "SDIO": 1 and 4 bit bus width, support for high-speed modes up to UHS-I SDR50, part of Meson6, Meson8 and Meson8b (the driver from this patch targets this controller) - "SDHC": 1, 4 and 8 bit bus width, compatible with standard iNAND interface, support for speeds up to HS200 and MMC spec up to version 4.5x, part of Meson8 and Meson8b SoCs (there is no mainline driver for this controller yet) - "SDEMMC": 1, 4 and 8 bit bus width, support for speeds up to HS400 and MMC spec up to version 5.0, part of the Meson GX (64-bit) SoCs (supported by the meson-gx MMC host driver) Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-03 19:24:17 +08:00
return 0;
}
static int meson_mx_mmc_probe(struct platform_device *pdev)
{
struct platform_device *slot_pdev;
struct mmc_host *mmc;
struct meson_mx_mmc_host *host;
struct resource *res;
int ret, irq;
u32 conf;
slot_pdev = meson_mx_mmc_slot_pdev(&pdev->dev);
if (!slot_pdev)
return -ENODEV;
else if (IS_ERR(slot_pdev))
return PTR_ERR(slot_pdev);
mmc = mmc_alloc_host(sizeof(*host), &slot_pdev->dev);
if (!mmc) {
ret = -ENOMEM;
goto error_unregister_slot_pdev;
}
host = mmc_priv(mmc);
host->mmc = mmc;
host->controller_dev = &pdev->dev;
spin_lock_init(&host->irq_lock);
timer_setup(&host->cmd_timeout, meson_mx_mmc_timeout, 0);
mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs Add a driver for the SDIO/MMC host found on the Amlogic Meson SoCs. This is an MMC controller which provides an interface between the application processor and various memory cards. It supports the SD specification v2.0 and the eMMC specification v4.41. The controller provides an internal "mux" which allows connecting up to three MMC devices to it. Only one device can be used at a time though since the registers are shared across all devices. The driver takes care of synchronizing access (similar to the dw_mmc driver). The maximum supported bus-width is 4-bits. Amlogic's GPL kernel sources call the corresponding driver "aml_sdio" to differentiate it from the other MMC controller in (at least the Meson8 and Meson8b) the SoCs (they call the other drivers aml_sdhc and aml_sdhc_m8, which seem to support a bus-width of up to 8-bits). This means that there are three different MMC host controller IP blocks from Amlogic (each of them with completely own register layout and features): - "SDIO": 1 and 4 bit bus width, support for high-speed modes up to UHS-I SDR50, part of Meson6, Meson8 and Meson8b (the driver from this patch targets this controller) - "SDHC": 1, 4 and 8 bit bus width, compatible with standard iNAND interface, support for speeds up to HS200 and MMC spec up to version 4.5x, part of Meson8 and Meson8b SoCs (there is no mainline driver for this controller yet) - "SDEMMC": 1, 4 and 8 bit bus width, support for speeds up to HS400 and MMC spec up to version 5.0, part of the Meson GX (64-bit) SoCs (supported by the meson-gx MMC host driver) Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-03 19:24:17 +08:00
platform_set_drvdata(pdev, host);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
host->base = devm_ioremap_resource(host->controller_dev, res);
if (IS_ERR(host->base)) {
ret = PTR_ERR(host->base);
goto error_free_mmc;
}
irq = platform_get_irq(pdev, 0);
ret = devm_request_threaded_irq(host->controller_dev, irq,
meson_mx_mmc_irq,
meson_mx_mmc_irq_thread, IRQF_ONESHOT,
NULL, host);
if (ret)
goto error_free_mmc;
host->core_clk = devm_clk_get(host->controller_dev, "core");
if (IS_ERR(host->core_clk)) {
ret = PTR_ERR(host->core_clk);
goto error_free_mmc;
}
host->parent_clk = devm_clk_get(host->controller_dev, "clkin");
if (IS_ERR(host->parent_clk)) {
ret = PTR_ERR(host->parent_clk);
goto error_free_mmc;
}
ret = meson_mx_mmc_register_clks(host);
if (ret)
goto error_free_mmc;
ret = clk_prepare_enable(host->core_clk);
if (ret) {
dev_err(host->controller_dev, "Failed to enable core clock\n");
goto error_free_mmc;
}
ret = clk_prepare_enable(host->cfg_div_clk);
if (ret) {
dev_err(host->controller_dev, "Failed to enable MMC clock\n");
goto error_disable_core_clk;
}
conf = 0;
conf |= FIELD_PREP(MESON_MX_SDIO_CONF_CMD_ARGUMENT_BITS_MASK, 39);
conf |= FIELD_PREP(MESON_MX_SDIO_CONF_M_ENDIAN_MASK, 0x3);
conf |= FIELD_PREP(MESON_MX_SDIO_CONF_WRITE_NWR_MASK, 0x2);
conf |= FIELD_PREP(MESON_MX_SDIO_CONF_WRITE_CRC_OK_STATUS_MASK, 0x2);
writel(conf, host->base + MESON_MX_SDIO_CONF);
meson_mx_mmc_soft_reset(host);
ret = meson_mx_mmc_add_host(host);
if (ret)
goto error_disable_clks;
return 0;
error_disable_clks:
clk_disable_unprepare(host->cfg_div_clk);
error_disable_core_clk:
clk_disable_unprepare(host->core_clk);
error_free_mmc:
mmc_free_host(mmc);
error_unregister_slot_pdev:
of_platform_device_destroy(&slot_pdev->dev, NULL);
return ret;
}
static int meson_mx_mmc_remove(struct platform_device *pdev)
{
struct meson_mx_mmc_host *host = platform_get_drvdata(pdev);
struct device *slot_dev = mmc_dev(host->mmc);
del_timer_sync(&host->cmd_timeout);
mmc_remove_host(host->mmc);
of_platform_device_destroy(slot_dev, NULL);
clk_disable_unprepare(host->cfg_div_clk);
clk_disable_unprepare(host->core_clk);
mmc_free_host(host->mmc);
return 0;
}
static const struct of_device_id meson_mx_mmc_of_match[] = {
{ .compatible = "amlogic,meson8-sdio", },
{ .compatible = "amlogic,meson8b-sdio", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, meson_mx_mmc_of_match);
static struct platform_driver meson_mx_mmc_driver = {
.probe = meson_mx_mmc_probe,
.remove = meson_mx_mmc_remove,
.driver = {
.name = "meson-mx-sdio",
.of_match_table = of_match_ptr(meson_mx_mmc_of_match),
},
};
module_platform_driver(meson_mx_mmc_driver);
MODULE_DESCRIPTION("Meson6, Meson8 and Meson8b SDIO/MMC Host Driver");
MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>");
MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
MODULE_LICENSE("GPL v2");