kernel_optimize_test/scripts/kconfig/parser.y

726 lines
15 KiB
Plaintext
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
*/
%{
#include <ctype.h>
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <stdbool.h>
#include "lkc.h"
#define printd(mask, fmt...) if (cdebug & (mask)) printf(fmt)
#define PRINTD 0x0001
#define DEBUG_PARSE 0x0002
int cdebug = PRINTD;
static void yyerror(const char *err);
static void zconfprint(const char *err, ...);
static void zconf_error(const char *err, ...);
static bool zconf_endtoken(const char *tokenname,
const char *expected_tokenname);
Improve kconfig symbol hashing While looking for something else I noticed that the symbol hash function used by kconfig is quite poor. It doesn't use any of the standard hash techniques but simply adds up the string and then uses power of two masking, which is both known to perform poorly. The current x86 kconfig has over 7000 symbols. When I instrumented it showed that the minimum hash chain length was 16 and a significant number of them was over 30. It didn't help that the hash table size was only 256 buckets. This patch increases the hash table size to a larger prime and switches to a FNV32 hash. I played around with a couple of hash functions, but that one seemed to perform best with reasonable hash table sizes. Increasing the hash table size even further didn't seem like a good idea, because there are a couple of global walks which walk the complete hash table. I also moved the unnamed bucket to 0. It's still the longest of all the buckets (44 entries), but hopefully it's not often hit except for the global walk which doesn't care. The result is a much nicer distribution: (first column bucket length, second number of buckets with that length) 1: 3505 2: 1236 3: 294 4: 52 5: 3 47: 1 <--- this is the unnamed symbols bucket There are still some 5+ buckets, but increasing the hash table even more would be likely not worth it. This also cleans up the code slightly by removing hard coded magic numbers. I didn't notice a big performance difference either way on my Nehalem system, but I presume it'll help somewhat on slower systems. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-01-14 00:02:44 +08:00
struct symbol *symbol_hash[SYMBOL_HASHSIZE];
static struct menu *current_menu, *current_entry;
%}
%union
{
char *string;
struct symbol *symbol;
struct expr *expr;
struct menu *menu;
enum symbol_type type;
enum variable_flavor flavor;
}
%token <string> T_HELPTEXT
%token <string> T_WORD
%token <string> T_WORD_QUOTE
%token T_ALLNOCONFIG_Y
%token T_BOOL
%token T_CHOICE
%token T_CLOSE_PAREN
%token T_COLON_EQUAL
%token T_COMMENT
%token T_CONFIG
%token T_DEFAULT
%token T_DEFCONFIG_LIST
%token T_DEF_BOOL
%token T_DEF_TRISTATE
%token T_DEPENDS
%token T_ENDCHOICE
%token T_ENDIF
%token T_ENDMENU
%token T_HELP
%token T_HEX
%token T_IF
%token T_IMPLY
%token T_INT
%token T_MAINMENU
%token T_MENU
%token T_MENUCONFIG
%token T_MODULES
%token T_ON
%token T_OPEN_PAREN
%token T_OPTION
%token T_OPTIONAL
%token T_PLUS_EQUAL
%token T_PROMPT
%token T_RANGE
%token T_SELECT
%token T_SOURCE
%token T_STRING
%token T_TRISTATE
%token T_VISIBLE
%token T_EOL
kconfig: support user-defined function and recursively expanded variable Now, we got a basic ability to test compiler capability in Kconfig. config CC_HAS_STACKPROTECTOR def_bool $(shell,($(CC) -Werror -fstack-protector -E -x c /dev/null -o /dev/null 2>/dev/null) && echo y || echo n) This works, but it is ugly to repeat this long boilerplate. We want to describe like this: config CC_HAS_STACKPROTECTOR bool default $(cc-option,-fstack-protector) It is straight-forward to add a new function, but I do not like to hard-code specialized functions like that. Hence, here is another feature, user-defined function. This works as a textual shorthand with parameterization. A user-defined function is defined by using the = operator, and can be referenced in the same way as built-in functions. A user-defined function in Make is referenced like $(call my-func,arg1,arg2), but I omitted the 'call' to make the syntax shorter. The definition of a user-defined function contains $(1), $(2), etc. in its body to reference the parameters. It is grammatically valid to pass more or fewer arguments when calling it. We already exploit this feature in our makefiles; scripts/Kbuild.include defines cc-option which takes two arguments at most, but most of the callers pass only one argument. By the way, a variable is supported as a subset of this feature since a variable is "a user-defined function with zero argument". In this context, I mean "variable" as recursively expanded variable. I will add a different flavored variable in the next commit. The code above can be written as follows: [Example Code] success = $(shell,($(1)) >/dev/null 2>&1 && echo y || echo n) cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null) config CC_HAS_STACKPROTECTOR def_bool $(cc-option,-fstack-protector) [Result] $ make -s alldefconfig && tail -n 1 .config CONFIG_CC_HAS_STACKPROTECTOR=y Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-28 17:21:49 +08:00
%token <string> T_ASSIGN_VAL
%left T_OR
%left T_AND
%left T_EQUAL T_UNEQUAL
%left T_LESS T_LESS_EQUAL T_GREATER T_GREATER_EQUAL
%nonassoc T_NOT
%type <symbol> nonconst_symbol
%type <symbol> symbol
%type <type> type logic_type default
%type <expr> expr
%type <expr> if_expr
%type <string> end
%type <menu> if_entry menu_entry choice_entry
%type <string> word_opt assign_val
%type <flavor> assign_op
%destructor {
fprintf(stderr, "%s:%d: missing end statement for this entry\n",
$$->file->name, $$->lineno);
if (current_menu == $$)
menu_end_menu();
} if_entry menu_entry choice_entry
%%
input: mainmenu_stmt stmt_list | stmt_list;
/* mainmenu entry */
mainmenu_stmt: T_MAINMENU T_WORD_QUOTE T_EOL
{
menu_add_prompt(P_MENU, $2, NULL);
};
stmt_list:
/* empty */
| stmt_list common_stmt
| stmt_list choice_stmt
| stmt_list menu_stmt
| stmt_list T_WORD error T_EOL { zconf_error("unknown statement \"%s\"", $2); }
| stmt_list error T_EOL { zconf_error("invalid statement"); }
;
common_stmt:
if_stmt
| comment_stmt
| config_stmt
| menuconfig_stmt
| source_stmt
kconfig: support user-defined function and recursively expanded variable Now, we got a basic ability to test compiler capability in Kconfig. config CC_HAS_STACKPROTECTOR def_bool $(shell,($(CC) -Werror -fstack-protector -E -x c /dev/null -o /dev/null 2>/dev/null) && echo y || echo n) This works, but it is ugly to repeat this long boilerplate. We want to describe like this: config CC_HAS_STACKPROTECTOR bool default $(cc-option,-fstack-protector) It is straight-forward to add a new function, but I do not like to hard-code specialized functions like that. Hence, here is another feature, user-defined function. This works as a textual shorthand with parameterization. A user-defined function is defined by using the = operator, and can be referenced in the same way as built-in functions. A user-defined function in Make is referenced like $(call my-func,arg1,arg2), but I omitted the 'call' to make the syntax shorter. The definition of a user-defined function contains $(1), $(2), etc. in its body to reference the parameters. It is grammatically valid to pass more or fewer arguments when calling it. We already exploit this feature in our makefiles; scripts/Kbuild.include defines cc-option which takes two arguments at most, but most of the callers pass only one argument. By the way, a variable is supported as a subset of this feature since a variable is "a user-defined function with zero argument". In this context, I mean "variable" as recursively expanded variable. I will add a different flavored variable in the next commit. The code above can be written as follows: [Example Code] success = $(shell,($(1)) >/dev/null 2>&1 && echo y || echo n) cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null) config CC_HAS_STACKPROTECTOR def_bool $(cc-option,-fstack-protector) [Result] $ make -s alldefconfig && tail -n 1 .config CONFIG_CC_HAS_STACKPROTECTOR=y Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-28 17:21:49 +08:00
| assignment_stmt
;
/* config/menuconfig entry */
config_entry_start: T_CONFIG nonconst_symbol T_EOL
{
$2->flags |= SYMBOL_OPTIONAL;
menu_add_entry($2);
printd(DEBUG_PARSE, "%s:%d:config %s\n", zconf_curname(), zconf_lineno(), $2->name);
};
config_stmt: config_entry_start config_option_list
{
printd(DEBUG_PARSE, "%s:%d:endconfig\n", zconf_curname(), zconf_lineno());
};
menuconfig_entry_start: T_MENUCONFIG nonconst_symbol T_EOL
{
$2->flags |= SYMBOL_OPTIONAL;
menu_add_entry($2);
printd(DEBUG_PARSE, "%s:%d:menuconfig %s\n", zconf_curname(), zconf_lineno(), $2->name);
};
menuconfig_stmt: menuconfig_entry_start config_option_list
{
if (current_entry->prompt)
current_entry->prompt->type = P_MENU;
else
zconfprint("warning: menuconfig statement without prompt");
printd(DEBUG_PARSE, "%s:%d:endconfig\n", zconf_curname(), zconf_lineno());
};
config_option_list:
/* empty */
| config_option_list config_option
| config_option_list depends
| config_option_list help
;
config_option: type prompt_stmt_opt T_EOL
{
menu_set_type($1);
printd(DEBUG_PARSE, "%s:%d:type(%u)\n",
zconf_curname(), zconf_lineno(),
$1);
};
config_option: T_PROMPT T_WORD_QUOTE if_expr T_EOL
{
menu_add_prompt(P_PROMPT, $2, $3);
printd(DEBUG_PARSE, "%s:%d:prompt\n", zconf_curname(), zconf_lineno());
};
config_option: default expr if_expr T_EOL
{
menu_add_expr(P_DEFAULT, $2, $3);
if ($1 != S_UNKNOWN)
menu_set_type($1);
printd(DEBUG_PARSE, "%s:%d:default(%u)\n",
zconf_curname(), zconf_lineno(),
$1);
};
config_option: T_SELECT nonconst_symbol if_expr T_EOL
{
menu_add_symbol(P_SELECT, $2, $3);
printd(DEBUG_PARSE, "%s:%d:select\n", zconf_curname(), zconf_lineno());
};
config_option: T_IMPLY nonconst_symbol if_expr T_EOL
Kconfig: Introduce the "imply" keyword The "imply" keyword is a weak version of "select" where the target config symbol can still be turned off, avoiding those pitfalls that come with the "select" keyword. This is useful e.g. with multiple drivers that want to indicate their ability to hook into a secondary subsystem while allowing the user to configure that subsystem out without also having to unset these drivers. Currently, the same effect can almost be achieved with: config DRIVER_A tristate config DRIVER_B tristate config DRIVER_C tristate config DRIVER_D tristate [...] config SUBSYSTEM_X tristate default DRIVER_A || DRIVER_B || DRIVER_C || DRIVER_D || [...] This is unwieldy to maintain especially with a large number of drivers. Furthermore, there is no easy way to restrict the choice for SUBSYSTEM_X to y or n, excluding m, when some drivers are built-in. The "select" keyword allows for excluding m, but it excludes n as well. Hence this "imply" keyword. The above becomes: config DRIVER_A tristate imply SUBSYSTEM_X config DRIVER_B tristate imply SUBSYSTEM_X [...] config SUBSYSTEM_X tristate This is much cleaner, and way more flexible than "select". SUBSYSTEM_X can still be configured out, and it can be set as a module when none of the drivers are configured in or all of them are modular. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: linux-kbuild@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Michal Marek <mmarek@suse.com> Cc: Edward Cree <ecree@solarflare.com> Link: http://lkml.kernel.org/r/1478841010-28605-2-git-send-email-nicolas.pitre@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-11 13:10:05 +08:00
{
menu_add_symbol(P_IMPLY, $2, $3);
Kconfig: Introduce the "imply" keyword The "imply" keyword is a weak version of "select" where the target config symbol can still be turned off, avoiding those pitfalls that come with the "select" keyword. This is useful e.g. with multiple drivers that want to indicate their ability to hook into a secondary subsystem while allowing the user to configure that subsystem out without also having to unset these drivers. Currently, the same effect can almost be achieved with: config DRIVER_A tristate config DRIVER_B tristate config DRIVER_C tristate config DRIVER_D tristate [...] config SUBSYSTEM_X tristate default DRIVER_A || DRIVER_B || DRIVER_C || DRIVER_D || [...] This is unwieldy to maintain especially with a large number of drivers. Furthermore, there is no easy way to restrict the choice for SUBSYSTEM_X to y or n, excluding m, when some drivers are built-in. The "select" keyword allows for excluding m, but it excludes n as well. Hence this "imply" keyword. The above becomes: config DRIVER_A tristate imply SUBSYSTEM_X config DRIVER_B tristate imply SUBSYSTEM_X [...] config SUBSYSTEM_X tristate This is much cleaner, and way more flexible than "select". SUBSYSTEM_X can still be configured out, and it can be set as a module when none of the drivers are configured in or all of them are modular. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: linux-kbuild@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Michal Marek <mmarek@suse.com> Cc: Edward Cree <ecree@solarflare.com> Link: http://lkml.kernel.org/r/1478841010-28605-2-git-send-email-nicolas.pitre@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-11 13:10:05 +08:00
printd(DEBUG_PARSE, "%s:%d:imply\n", zconf_curname(), zconf_lineno());
};
config_option: T_RANGE symbol symbol if_expr T_EOL
{
menu_add_expr(P_RANGE, expr_alloc_comp(E_RANGE,$2, $3), $4);
printd(DEBUG_PARSE, "%s:%d:range\n", zconf_curname(), zconf_lineno());
};
config_option: T_OPTION T_MODULES T_EOL
{
menu_add_option_modules();
};
config_option: T_OPTION T_DEFCONFIG_LIST T_EOL
{
menu_add_option_defconfig_list();
};
config_option: T_OPTION T_ALLNOCONFIG_Y T_EOL
{
menu_add_option_allnoconfig_y();
};
/* choice entry */
choice: T_CHOICE word_opt T_EOL
{
struct symbol *sym = sym_lookup($2, SYMBOL_CHOICE);
sym->flags |= SYMBOL_NO_WRITE;
menu_add_entry(sym);
menu_add_expr(P_CHOICE, NULL, NULL);
free($2);
printd(DEBUG_PARSE, "%s:%d:choice\n", zconf_curname(), zconf_lineno());
};
choice_entry: choice choice_option_list
{
$$ = menu_add_menu();
};
choice_end: end
{
if (zconf_endtoken($1, "choice")) {
menu_end_menu();
printd(DEBUG_PARSE, "%s:%d:endchoice\n", zconf_curname(), zconf_lineno());
}
};
choice_stmt: choice_entry choice_block choice_end
;
choice_option_list:
/* empty */
| choice_option_list choice_option
| choice_option_list depends
| choice_option_list help
;
choice_option: T_PROMPT T_WORD_QUOTE if_expr T_EOL
{
menu_add_prompt(P_PROMPT, $2, $3);
printd(DEBUG_PARSE, "%s:%d:prompt\n", zconf_curname(), zconf_lineno());
};
choice_option: logic_type prompt_stmt_opt T_EOL
{
menu_set_type($1);
printd(DEBUG_PARSE, "%s:%d:type(%u)\n",
zconf_curname(), zconf_lineno(), $1);
};
choice_option: T_OPTIONAL T_EOL
{
current_entry->sym->flags |= SYMBOL_OPTIONAL;
printd(DEBUG_PARSE, "%s:%d:optional\n", zconf_curname(), zconf_lineno());
};
choice_option: T_DEFAULT nonconst_symbol if_expr T_EOL
{
menu_add_symbol(P_DEFAULT, $2, $3);
printd(DEBUG_PARSE, "%s:%d:default\n",
zconf_curname(), zconf_lineno());
};
type:
logic_type
| T_INT { $$ = S_INT; }
| T_HEX { $$ = S_HEX; }
| T_STRING { $$ = S_STRING; }
logic_type:
T_BOOL { $$ = S_BOOLEAN; }
| T_TRISTATE { $$ = S_TRISTATE; }
default:
T_DEFAULT { $$ = S_UNKNOWN; }
| T_DEF_BOOL { $$ = S_BOOLEAN; }
| T_DEF_TRISTATE { $$ = S_TRISTATE; }
choice_block:
/* empty */
| choice_block common_stmt
;
/* if entry */
if_entry: T_IF expr T_EOL
{
printd(DEBUG_PARSE, "%s:%d:if\n", zconf_curname(), zconf_lineno());
menu_add_entry(NULL);
menu_add_dep($2);
$$ = menu_add_menu();
};
if_end: end
{
if (zconf_endtoken($1, "if")) {
menu_end_menu();
printd(DEBUG_PARSE, "%s:%d:endif\n", zconf_curname(), zconf_lineno());
}
};
if_stmt: if_entry stmt_list if_end
;
/* menu entry */
menu: T_MENU T_WORD_QUOTE T_EOL
{
menu_add_entry(NULL);
menu_add_prompt(P_MENU, $2, NULL);
printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno());
};
menu_entry: menu menu_option_list
{
$$ = menu_add_menu();
};
menu_end: end
{
if (zconf_endtoken($1, "menu")) {
menu_end_menu();
printd(DEBUG_PARSE, "%s:%d:endmenu\n", zconf_curname(), zconf_lineno());
}
};
menu_stmt: menu_entry stmt_list menu_end
;
menu_option_list:
/* empty */
| menu_option_list visible
| menu_option_list depends
;
source_stmt: T_SOURCE T_WORD_QUOTE T_EOL
{
printd(DEBUG_PARSE, "%s:%d:source %s\n", zconf_curname(), zconf_lineno(), $2);
zconf_nextfile($2);
free($2);
};
/* comment entry */
comment: T_COMMENT T_WORD_QUOTE T_EOL
{
menu_add_entry(NULL);
menu_add_prompt(P_COMMENT, $2, NULL);
printd(DEBUG_PARSE, "%s:%d:comment\n", zconf_curname(), zconf_lineno());
};
comment_stmt: comment comment_option_list
;
comment_option_list:
/* empty */
| comment_option_list depends
;
/* help option */
help_start: T_HELP T_EOL
{
printd(DEBUG_PARSE, "%s:%d:help\n", zconf_curname(), zconf_lineno());
zconf_starthelp();
};
help: help_start T_HELPTEXT
{
if (current_entry->help) {
free(current_entry->help);
zconfprint("warning: '%s' defined with more than one help text -- only the last one will be used",
current_entry->sym->name ?: "<choice>");
}
/* Is the help text empty or all whitespace? */
if ($2[strspn($2, " \f\n\r\t\v")] == '\0')
zconfprint("warning: '%s' defined with blank help text",
current_entry->sym->name ?: "<choice>");
current_entry->help = $2;
};
/* depends option */
depends: T_DEPENDS T_ON expr T_EOL
{
menu_add_dep($3);
printd(DEBUG_PARSE, "%s:%d:depends on\n", zconf_curname(), zconf_lineno());
};
/* visibility option */
visible: T_VISIBLE if_expr T_EOL
{
menu_add_visibility($2);
};
/* prompt statement */
prompt_stmt_opt:
/* empty */
| T_WORD_QUOTE if_expr
{
menu_add_prompt(P_PROMPT, $1, $2);
};
end: T_ENDMENU T_EOL { $$ = "menu"; }
| T_ENDCHOICE T_EOL { $$ = "choice"; }
| T_ENDIF T_EOL { $$ = "if"; }
;
if_expr: /* empty */ { $$ = NULL; }
| T_IF expr { $$ = $2; }
;
expr: symbol { $$ = expr_alloc_symbol($1); }
| symbol T_LESS symbol { $$ = expr_alloc_comp(E_LTH, $1, $3); }
| symbol T_LESS_EQUAL symbol { $$ = expr_alloc_comp(E_LEQ, $1, $3); }
| symbol T_GREATER symbol { $$ = expr_alloc_comp(E_GTH, $1, $3); }
| symbol T_GREATER_EQUAL symbol { $$ = expr_alloc_comp(E_GEQ, $1, $3); }
| symbol T_EQUAL symbol { $$ = expr_alloc_comp(E_EQUAL, $1, $3); }
| symbol T_UNEQUAL symbol { $$ = expr_alloc_comp(E_UNEQUAL, $1, $3); }
| T_OPEN_PAREN expr T_CLOSE_PAREN { $$ = $2; }
| T_NOT expr { $$ = expr_alloc_one(E_NOT, $2); }
| expr T_OR expr { $$ = expr_alloc_two(E_OR, $1, $3); }
| expr T_AND expr { $$ = expr_alloc_two(E_AND, $1, $3); }
;
/* For symbol definitions, selects, etc., where quotes are not accepted */
nonconst_symbol: T_WORD { $$ = sym_lookup($1, 0); free($1); };
symbol: nonconst_symbol
| T_WORD_QUOTE { $$ = sym_lookup($1, SYMBOL_CONST); free($1); }
;
word_opt: /* empty */ { $$ = NULL; }
| T_WORD
kconfig: support user-defined function and recursively expanded variable Now, we got a basic ability to test compiler capability in Kconfig. config CC_HAS_STACKPROTECTOR def_bool $(shell,($(CC) -Werror -fstack-protector -E -x c /dev/null -o /dev/null 2>/dev/null) && echo y || echo n) This works, but it is ugly to repeat this long boilerplate. We want to describe like this: config CC_HAS_STACKPROTECTOR bool default $(cc-option,-fstack-protector) It is straight-forward to add a new function, but I do not like to hard-code specialized functions like that. Hence, here is another feature, user-defined function. This works as a textual shorthand with parameterization. A user-defined function is defined by using the = operator, and can be referenced in the same way as built-in functions. A user-defined function in Make is referenced like $(call my-func,arg1,arg2), but I omitted the 'call' to make the syntax shorter. The definition of a user-defined function contains $(1), $(2), etc. in its body to reference the parameters. It is grammatically valid to pass more or fewer arguments when calling it. We already exploit this feature in our makefiles; scripts/Kbuild.include defines cc-option which takes two arguments at most, but most of the callers pass only one argument. By the way, a variable is supported as a subset of this feature since a variable is "a user-defined function with zero argument". In this context, I mean "variable" as recursively expanded variable. I will add a different flavored variable in the next commit. The code above can be written as follows: [Example Code] success = $(shell,($(1)) >/dev/null 2>&1 && echo y || echo n) cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null) config CC_HAS_STACKPROTECTOR def_bool $(cc-option,-fstack-protector) [Result] $ make -s alldefconfig && tail -n 1 .config CONFIG_CC_HAS_STACKPROTECTOR=y Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-28 17:21:49 +08:00
/* assignment statement */
assignment_stmt: T_WORD assign_op assign_val T_EOL { variable_add($1, $3, $2); free($1); free($3); }
assign_op:
T_EQUAL { $$ = VAR_RECURSIVE; }
| T_COLON_EQUAL { $$ = VAR_SIMPLE; }
| T_PLUS_EQUAL { $$ = VAR_APPEND; }
;
kconfig: support user-defined function and recursively expanded variable Now, we got a basic ability to test compiler capability in Kconfig. config CC_HAS_STACKPROTECTOR def_bool $(shell,($(CC) -Werror -fstack-protector -E -x c /dev/null -o /dev/null 2>/dev/null) && echo y || echo n) This works, but it is ugly to repeat this long boilerplate. We want to describe like this: config CC_HAS_STACKPROTECTOR bool default $(cc-option,-fstack-protector) It is straight-forward to add a new function, but I do not like to hard-code specialized functions like that. Hence, here is another feature, user-defined function. This works as a textual shorthand with parameterization. A user-defined function is defined by using the = operator, and can be referenced in the same way as built-in functions. A user-defined function in Make is referenced like $(call my-func,arg1,arg2), but I omitted the 'call' to make the syntax shorter. The definition of a user-defined function contains $(1), $(2), etc. in its body to reference the parameters. It is grammatically valid to pass more or fewer arguments when calling it. We already exploit this feature in our makefiles; scripts/Kbuild.include defines cc-option which takes two arguments at most, but most of the callers pass only one argument. By the way, a variable is supported as a subset of this feature since a variable is "a user-defined function with zero argument". In this context, I mean "variable" as recursively expanded variable. I will add a different flavored variable in the next commit. The code above can be written as follows: [Example Code] success = $(shell,($(1)) >/dev/null 2>&1 && echo y || echo n) cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null) config CC_HAS_STACKPROTECTOR def_bool $(cc-option,-fstack-protector) [Result] $ make -s alldefconfig && tail -n 1 .config CONFIG_CC_HAS_STACKPROTECTOR=y Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-28 17:21:49 +08:00
assign_val:
/* empty */ { $$ = xstrdup(""); };
| T_ASSIGN_VAL
;
%%
void conf_parse(const char *name)
{
struct symbol *sym;
int i;
zconf_initscan(name);
_menu_init();
if (getenv("ZCONF_DEBUG"))
yydebug = 1;
yyparse();
kconfig: support user-defined function and recursively expanded variable Now, we got a basic ability to test compiler capability in Kconfig. config CC_HAS_STACKPROTECTOR def_bool $(shell,($(CC) -Werror -fstack-protector -E -x c /dev/null -o /dev/null 2>/dev/null) && echo y || echo n) This works, but it is ugly to repeat this long boilerplate. We want to describe like this: config CC_HAS_STACKPROTECTOR bool default $(cc-option,-fstack-protector) It is straight-forward to add a new function, but I do not like to hard-code specialized functions like that. Hence, here is another feature, user-defined function. This works as a textual shorthand with parameterization. A user-defined function is defined by using the = operator, and can be referenced in the same way as built-in functions. A user-defined function in Make is referenced like $(call my-func,arg1,arg2), but I omitted the 'call' to make the syntax shorter. The definition of a user-defined function contains $(1), $(2), etc. in its body to reference the parameters. It is grammatically valid to pass more or fewer arguments when calling it. We already exploit this feature in our makefiles; scripts/Kbuild.include defines cc-option which takes two arguments at most, but most of the callers pass only one argument. By the way, a variable is supported as a subset of this feature since a variable is "a user-defined function with zero argument". In this context, I mean "variable" as recursively expanded variable. I will add a different flavored variable in the next commit. The code above can be written as follows: [Example Code] success = $(shell,($(1)) >/dev/null 2>&1 && echo y || echo n) cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null) config CC_HAS_STACKPROTECTOR def_bool $(cc-option,-fstack-protector) [Result] $ make -s alldefconfig && tail -n 1 .config CONFIG_CC_HAS_STACKPROTECTOR=y Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-28 17:21:49 +08:00
/* Variables are expanded in the parse phase. We can free them here. */
variable_all_del();
if (yynerrs)
exit(1);
if (!modules_sym)
modules_sym = sym_find( "n" );
if (!menu_has_prompt(&rootmenu)) {
current_entry = &rootmenu;
menu_add_prompt(P_MENU, "Main menu", NULL);
}
menu_finalize(&rootmenu);
for_all_symbols(i, sym) {
if (sym_check_deps(sym))
yynerrs++;
}
if (yynerrs)
exit(1);
sym_set_change_count(1);
}
static bool zconf_endtoken(const char *tokenname,
const char *expected_tokenname)
{
if (strcmp(tokenname, expected_tokenname)) {
zconf_error("unexpected '%s' within %s block",
tokenname, expected_tokenname);
yynerrs++;
return false;
}
if (current_menu->file != current_file) {
zconf_error("'%s' in different file than '%s'",
tokenname, expected_tokenname);
fprintf(stderr, "%s:%d: location of the '%s'\n",
current_menu->file->name, current_menu->lineno,
expected_tokenname);
yynerrs++;
return false;
}
return true;
}
static void zconfprint(const char *err, ...)
{
va_list ap;
fprintf(stderr, "%s:%d: ", zconf_curname(), zconf_lineno());
va_start(ap, err);
vfprintf(stderr, err, ap);
va_end(ap);
fprintf(stderr, "\n");
}
static void zconf_error(const char *err, ...)
{
va_list ap;
yynerrs++;
fprintf(stderr, "%s:%d: ", zconf_curname(), zconf_lineno());
va_start(ap, err);
vfprintf(stderr, err, ap);
va_end(ap);
fprintf(stderr, "\n");
}
static void yyerror(const char *err)
{
fprintf(stderr, "%s:%d: %s\n", zconf_curname(), zconf_lineno() + 1, err);
}
static void print_quoted_string(FILE *out, const char *str)
{
const char *p;
int len;
putc('"', out);
while ((p = strchr(str, '"'))) {
len = p - str;
if (len)
fprintf(out, "%.*s", len, str);
fputs("\\\"", out);
str = p + 1;
}
fputs(str, out);
putc('"', out);
}
static void print_symbol(FILE *out, struct menu *menu)
{
struct symbol *sym = menu->sym;
struct property *prop;
if (sym_is_choice(sym))
fprintf(out, "\nchoice\n");
else
fprintf(out, "\nconfig %s\n", sym->name);
switch (sym->type) {
case S_BOOLEAN:
fputs(" bool\n", out);
break;
case S_TRISTATE:
fputs(" tristate\n", out);
break;
case S_STRING:
fputs(" string\n", out);
break;
case S_INT:
fputs(" integer\n", out);
break;
case S_HEX:
fputs(" hex\n", out);
break;
default:
fputs(" ???\n", out);
break;
}
for (prop = sym->prop; prop; prop = prop->next) {
if (prop->menu != menu)
continue;
switch (prop->type) {
case P_PROMPT:
fputs(" prompt ", out);
print_quoted_string(out, prop->text);
if (!expr_is_yes(prop->visible.expr)) {
fputs(" if ", out);
expr_fprint(prop->visible.expr, out);
}
fputc('\n', out);
break;
case P_DEFAULT:
fputs( " default ", out);
expr_fprint(prop->expr, out);
if (!expr_is_yes(prop->visible.expr)) {
fputs(" if ", out);
expr_fprint(prop->visible.expr, out);
}
fputc('\n', out);
break;
case P_CHOICE:
fputs(" #choice value\n", out);
break;
case P_SELECT:
fputs( " select ", out);
expr_fprint(prop->expr, out);
fputc('\n', out);
break;
Kconfig: Introduce the "imply" keyword The "imply" keyword is a weak version of "select" where the target config symbol can still be turned off, avoiding those pitfalls that come with the "select" keyword. This is useful e.g. with multiple drivers that want to indicate their ability to hook into a secondary subsystem while allowing the user to configure that subsystem out without also having to unset these drivers. Currently, the same effect can almost be achieved with: config DRIVER_A tristate config DRIVER_B tristate config DRIVER_C tristate config DRIVER_D tristate [...] config SUBSYSTEM_X tristate default DRIVER_A || DRIVER_B || DRIVER_C || DRIVER_D || [...] This is unwieldy to maintain especially with a large number of drivers. Furthermore, there is no easy way to restrict the choice for SUBSYSTEM_X to y or n, excluding m, when some drivers are built-in. The "select" keyword allows for excluding m, but it excludes n as well. Hence this "imply" keyword. The above becomes: config DRIVER_A tristate imply SUBSYSTEM_X config DRIVER_B tristate imply SUBSYSTEM_X [...] config SUBSYSTEM_X tristate This is much cleaner, and way more flexible than "select". SUBSYSTEM_X can still be configured out, and it can be set as a module when none of the drivers are configured in or all of them are modular. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: linux-kbuild@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Michal Marek <mmarek@suse.com> Cc: Edward Cree <ecree@solarflare.com> Link: http://lkml.kernel.org/r/1478841010-28605-2-git-send-email-nicolas.pitre@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-11 13:10:05 +08:00
case P_IMPLY:
fputs( " imply ", out);
expr_fprint(prop->expr, out);
fputc('\n', out);
break;
case P_RANGE:
fputs( " range ", out);
expr_fprint(prop->expr, out);
fputc('\n', out);
break;
case P_MENU:
fputs( " menu ", out);
print_quoted_string(out, prop->text);
fputc('\n', out);
break;
case P_SYMBOL:
fputs( " symbol ", out);
fprintf(out, "%s\n", prop->menu->sym->name);
break;
default:
fprintf(out, " unknown prop %d!\n", prop->type);
break;
}
}
if (menu->help) {
int len = strlen(menu->help);
while (menu->help[--len] == '\n')
menu->help[len] = 0;
fprintf(out, " help\n%s\n", menu->help);
}
}
void zconfdump(FILE *out)
{
struct property *prop;
struct symbol *sym;
struct menu *menu;
menu = rootmenu.list;
while (menu) {
if ((sym = menu->sym))
print_symbol(out, menu);
else if ((prop = menu->prompt)) {
switch (prop->type) {
case P_COMMENT:
fputs("\ncomment ", out);
print_quoted_string(out, prop->text);
fputs("\n", out);
break;
case P_MENU:
fputs("\nmenu ", out);
print_quoted_string(out, prop->text);
fputs("\n", out);
break;
default:
;
}
if (!expr_is_yes(prop->visible.expr)) {
fputs(" depends ", out);
expr_fprint(prop->visible.expr, out);
fputc('\n', out);
}
}
if (menu->list)
menu = menu->list;
else if (menu->next)
menu = menu->next;
else while ((menu = menu->parent)) {
if (menu->prompt && menu->prompt->type == P_MENU)
fputs("\nendmenu\n", out);
if (menu->next) {
menu = menu->next;
break;
}
}
}
}
#include "menu.c"