kernel_optimize_test/include/asm-um/processor-generic.h

148 lines
2.9 KiB
C
Raw Normal View History

/*
* Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
#ifndef __UM_PROCESSOR_GENERIC_H
#define __UM_PROCESSOR_GENERIC_H
struct pt_regs;
struct task_struct;
#include "asm/ptrace.h"
#include "choose-mode.h"
#include "registers.h"
[PATCH] uml: thread creation tidying fork on UML has always somewhat subtle. The underlying cause has been the need to initialize a stack for the new process. The only portable way to initialize a new stack is to set it as the alternate signal stack and take a signal. The signal handler does whatever initialization is needed and jumps back to the original stack, where the fork processing is finished. The basic context switching mechanism is a jmp_buf for each process. You switch to a new process by longjmping to its jmp_buf. Now that UML has its own implementation of setjmp and longjmp, and I can poke around inside a jmp_buf without fear that libc will change the structure, a much simpler mechanism is possible. The jmpbuf can simply be initialized by hand. This eliminates - the need to set up and remove the alternate signal stack sending and handling a signal the signal blocking needed around the stack switching, since there is no stack switching setting up the jmp_buf needed to jump back to the original stack after the new one is set up In addition, since jmp_buf is now defined by UML, and not by libc, it can be embedded in the thread struct. This makes it unnecessary to have it exist on the stack, where it used to be. It also simplifies interfaces, since the switch jmp_buf used to be a void * inside the thread struct, and functions which took it as an argument needed to define a jmp_buf variable and assign it from the void *. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 16:50:40 +08:00
#include "sysdep/archsetjmp.h"
struct mm_struct;
struct thread_struct {
/* This flag is set to 1 before calling do_fork (and analyzed in
* copy_thread) to mark that we are begin called from userspace (fork /
* vfork / clone), and reset to 0 after. It is left to 0 when called
* from kernelspace (i.e. kernel_thread() or fork_idle(), as of 2.6.11). */
struct task_struct *saved_task;
int forking;
int nsyscalls;
struct pt_regs regs;
int singlestep_syscall;
void *fault_addr;
void *fault_catcher;
struct task_struct *prev_sched;
unsigned long temp_stack;
void *exec_buf;
struct arch_thread arch;
union {
#ifdef CONFIG_MODE_TT
struct {
int extern_pid;
int tracing;
int switch_pipe[2];
int vm_seq;
} tt;
#endif
#ifdef CONFIG_MODE_SKAS
struct {
[PATCH] uml: thread creation tidying fork on UML has always somewhat subtle. The underlying cause has been the need to initialize a stack for the new process. The only portable way to initialize a new stack is to set it as the alternate signal stack and take a signal. The signal handler does whatever initialization is needed and jumps back to the original stack, where the fork processing is finished. The basic context switching mechanism is a jmp_buf for each process. You switch to a new process by longjmping to its jmp_buf. Now that UML has its own implementation of setjmp and longjmp, and I can poke around inside a jmp_buf without fear that libc will change the structure, a much simpler mechanism is possible. The jmpbuf can simply be initialized by hand. This eliminates - the need to set up and remove the alternate signal stack sending and handling a signal the signal blocking needed around the stack switching, since there is no stack switching setting up the jmp_buf needed to jump back to the original stack after the new one is set up In addition, since jmp_buf is now defined by UML, and not by libc, it can be embedded in the thread struct. This makes it unnecessary to have it exist on the stack, where it used to be. It also simplifies interfaces, since the switch jmp_buf used to be a void * inside the thread struct, and functions which took it as an argument needed to define a jmp_buf variable and assign it from the void *. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 16:50:40 +08:00
jmp_buf switch_buf;
int mm_count;
} skas;
#endif
} mode;
struct {
int op;
union {
struct {
int pid;
} fork, exec;
struct {
int (*proc)(void *);
void *arg;
} thread;
struct {
void (*proc)(void *);
void *arg;
} cb;
} u;
} request;
};
#define INIT_THREAD \
{ \
.forking = 0, \
.nsyscalls = 0, \
.regs = EMPTY_REGS, \
.fault_addr = NULL, \
.prev_sched = NULL, \
.temp_stack = 0, \
.exec_buf = NULL, \
.arch = INIT_ARCH_THREAD, \
.request = { 0 } \
}
typedef struct {
unsigned long seg;
} mm_segment_t;
extern struct task_struct *alloc_task_struct(void);
extern void release_thread(struct task_struct *);
extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
static inline void prepare_to_copy(struct task_struct *tsk)
{
}
extern unsigned long thread_saved_pc(struct task_struct *t);
static inline void mm_copy_segments(struct mm_struct *from_mm,
struct mm_struct *new_mm)
{
}
#define init_stack (init_thread_union.stack)
/*
* User space process size: 3GB (default).
*/
extern unsigned long task_size;
#define TASK_SIZE (task_size)
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
#define TASK_UNMAPPED_BASE (0x40000000)
extern void start_thread(struct pt_regs *regs, unsigned long entry,
unsigned long stack);
struct cpuinfo_um {
unsigned long loops_per_jiffy;
int ipi_pipe[2];
};
extern struct cpuinfo_um boot_cpu_data;
#define my_cpu_data cpu_data[smp_processor_id()]
#ifdef CONFIG_SMP
extern struct cpuinfo_um cpu_data[];
#define current_cpu_data cpu_data[smp_processor_id()]
#else
#define cpu_data (&boot_cpu_data)
#define current_cpu_data boot_cpu_data
#endif
#ifdef CONFIG_MODE_SKAS
#define KSTK_REG(tsk, reg) \
[PATCH] uml: thread creation tidying fork on UML has always somewhat subtle. The underlying cause has been the need to initialize a stack for the new process. The only portable way to initialize a new stack is to set it as the alternate signal stack and take a signal. The signal handler does whatever initialization is needed and jumps back to the original stack, where the fork processing is finished. The basic context switching mechanism is a jmp_buf for each process. You switch to a new process by longjmping to its jmp_buf. Now that UML has its own implementation of setjmp and longjmp, and I can poke around inside a jmp_buf without fear that libc will change the structure, a much simpler mechanism is possible. The jmpbuf can simply be initialized by hand. This eliminates - the need to set up and remove the alternate signal stack sending and handling a signal the signal blocking needed around the stack switching, since there is no stack switching setting up the jmp_buf needed to jump back to the original stack after the new one is set up In addition, since jmp_buf is now defined by UML, and not by libc, it can be embedded in the thread struct. This makes it unnecessary to have it exist on the stack, where it used to be. It also simplifies interfaces, since the switch jmp_buf used to be a void * inside the thread struct, and functions which took it as an argument needed to define a jmp_buf variable and assign it from the void *. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 16:50:40 +08:00
get_thread_reg(reg, &tsk->thread.mode.skas.switch_buf)
#else
#define KSTK_REG(tsk, reg) (0xbadbabe)
#endif
#define get_wchan(p) (0)
#endif