kernel_optimize_test/samples/bpf/xdp2skb_meta_kern.c

106 lines
3.0 KiB
C
Raw Normal View History

samples/bpf: xdp2skb_meta shows transferring info from XDP to SKB Creating a bpf sample that shows howto use the XDP 'data_meta' infrastructure, created by Daniel Borkmann. Very few drivers support this feature, but I wanted a functional sample to begin with, when working on adding driver support. XDP data_meta is about creating a communication channel between BPF programs. This can be XDP tail-progs, but also other SKB based BPF hooks, like in this case the TC clsact hook. In this sample I show that XDP can store info named "mark", and TC/clsact chooses to use this info and store it into the skb->mark. It is a bit annoying that XDP and TC samples uses different tools/libs when attaching their BPF hooks. As the XDP and TC programs need to cooperate and agree on a struct-layout, it is best/easiest if the two programs can be contained within the same BPF restricted-C file. As the bpf-loader, I choose to not use bpf_load.c (or libbpf), but instead wrote a bash shell scripted named xdp2skb_meta.sh, which demonstrate howto use the iproute cmdline tools 'tc' and 'ip' for loading BPF programs. To make it easy for first time users, the shell script have command line parsing, and support --verbose and --dry-run mode, if you just want to see/learn the tc+ip command syntax: # ./xdp2skb_meta.sh --dev ixgbe2 --dry-run # Dry-run mode: enable VERBOSE and don't call TC+IP tc qdisc del dev ixgbe2 clsact tc qdisc add dev ixgbe2 clsact tc filter add dev ixgbe2 ingress prio 1 handle 1 bpf da obj ./xdp2skb_meta_kern.o sec tc_mark # Flush XDP on device: ixgbe2 ip link set dev ixgbe2 xdp off ip link set dev ixgbe2 xdp obj ./xdp2skb_meta_kern.o sec xdp_mark Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-11 01:21:44 +08:00
/* SPDX-License-Identifier: GPL-2.0
* Copyright (c) 2018 Jesper Dangaard Brouer, Red Hat Inc.
*
* Example howto transfer info from XDP to SKB, e.g. skb->mark
* -----------------------------------------------------------
* This uses the XDP data_meta infrastructure, and is a cooperation
* between two bpf-programs (1) XDP and (2) clsact at TC-ingress hook.
*
* Notice: This example does not use the BPF C-loader (bpf_load.c),
* but instead rely on the iproute2 TC tool for loading BPF-objects.
*/
#include <uapi/linux/bpf.h>
#include <uapi/linux/pkt_cls.h>
#include "bpf_helpers.h"
/*
* This struct is stored in the XDP 'data_meta' area, which is located
* just in-front-of the raw packet payload data. The meaning is
* specific to these two BPF programs that use it as a communication
* channel. XDP adjust/increase the area via a bpf-helper, and TC use
* boundary checks to see if data have been provided.
*
* The struct must be 4 byte aligned, which here is enforced by the
* struct __attribute__((aligned(4))).
*/
struct meta_info {
__u32 mark;
} __attribute__((aligned(4)));
SEC("xdp_mark")
int _xdp_mark(struct xdp_md *ctx)
{
struct meta_info *meta;
void *data, *data_end;
int ret;
/* Reserve space in-front of data pointer for our meta info.
samples/bpf: xdp2skb_meta shows transferring info from XDP to SKB Creating a bpf sample that shows howto use the XDP 'data_meta' infrastructure, created by Daniel Borkmann. Very few drivers support this feature, but I wanted a functional sample to begin with, when working on adding driver support. XDP data_meta is about creating a communication channel between BPF programs. This can be XDP tail-progs, but also other SKB based BPF hooks, like in this case the TC clsact hook. In this sample I show that XDP can store info named "mark", and TC/clsact chooses to use this info and store it into the skb->mark. It is a bit annoying that XDP and TC samples uses different tools/libs when attaching their BPF hooks. As the XDP and TC programs need to cooperate and agree on a struct-layout, it is best/easiest if the two programs can be contained within the same BPF restricted-C file. As the bpf-loader, I choose to not use bpf_load.c (or libbpf), but instead wrote a bash shell scripted named xdp2skb_meta.sh, which demonstrate howto use the iproute cmdline tools 'tc' and 'ip' for loading BPF programs. To make it easy for first time users, the shell script have command line parsing, and support --verbose and --dry-run mode, if you just want to see/learn the tc+ip command syntax: # ./xdp2skb_meta.sh --dev ixgbe2 --dry-run # Dry-run mode: enable VERBOSE and don't call TC+IP tc qdisc del dev ixgbe2 clsact tc qdisc add dev ixgbe2 clsact tc filter add dev ixgbe2 ingress prio 1 handle 1 bpf da obj ./xdp2skb_meta_kern.o sec tc_mark # Flush XDP on device: ixgbe2 ip link set dev ixgbe2 xdp off ip link set dev ixgbe2 xdp obj ./xdp2skb_meta_kern.o sec xdp_mark Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-11 01:21:44 +08:00
* (Notice drivers not supporting data_meta will fail here!)
*/
ret = bpf_xdp_adjust_meta(ctx, -(int)sizeof(*meta));
if (ret < 0)
return XDP_ABORTED;
/* Notice: Kernel-side verifier requires that loading of
* ctx->data MUST happen _after_ helper bpf_xdp_adjust_meta(),
* as pkt-data pointers are invalidated. Helpers that require
* this are determined/marked by bpf_helper_changes_pkt_data()
samples/bpf: xdp2skb_meta shows transferring info from XDP to SKB Creating a bpf sample that shows howto use the XDP 'data_meta' infrastructure, created by Daniel Borkmann. Very few drivers support this feature, but I wanted a functional sample to begin with, when working on adding driver support. XDP data_meta is about creating a communication channel between BPF programs. This can be XDP tail-progs, but also other SKB based BPF hooks, like in this case the TC clsact hook. In this sample I show that XDP can store info named "mark", and TC/clsact chooses to use this info and store it into the skb->mark. It is a bit annoying that XDP and TC samples uses different tools/libs when attaching their BPF hooks. As the XDP and TC programs need to cooperate and agree on a struct-layout, it is best/easiest if the two programs can be contained within the same BPF restricted-C file. As the bpf-loader, I choose to not use bpf_load.c (or libbpf), but instead wrote a bash shell scripted named xdp2skb_meta.sh, which demonstrate howto use the iproute cmdline tools 'tc' and 'ip' for loading BPF programs. To make it easy for first time users, the shell script have command line parsing, and support --verbose and --dry-run mode, if you just want to see/learn the tc+ip command syntax: # ./xdp2skb_meta.sh --dev ixgbe2 --dry-run # Dry-run mode: enable VERBOSE and don't call TC+IP tc qdisc del dev ixgbe2 clsact tc qdisc add dev ixgbe2 clsact tc filter add dev ixgbe2 ingress prio 1 handle 1 bpf da obj ./xdp2skb_meta_kern.o sec tc_mark # Flush XDP on device: ixgbe2 ip link set dev ixgbe2 xdp off ip link set dev ixgbe2 xdp obj ./xdp2skb_meta_kern.o sec xdp_mark Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-11 01:21:44 +08:00
*/
data = (void *)(unsigned long)ctx->data;
/* Check data_meta have room for meta_info struct */
meta = (void *)(unsigned long)ctx->data_meta;
if (meta + 1 > data)
return XDP_ABORTED;
meta->mark = 42;
return XDP_PASS;
}
SEC("tc_mark")
int _tc_mark(struct __sk_buff *ctx)
{
void *data = (void *)(unsigned long)ctx->data;
void *data_end = (void *)(unsigned long)ctx->data_end;
void *data_meta = (void *)(unsigned long)ctx->data_meta;
struct meta_info *meta = data_meta;
/* Check XDP gave us some data_meta */
if (meta + 1 > data) {
ctx->mark = 41;
/* Skip "accept" if no data_meta is avail */
return TC_ACT_OK;
}
/* Hint: See func tc_cls_act_is_valid_access() for BPF_WRITE access */
ctx->mark = meta->mark; /* Transfer XDP-mark to SKB-mark */
return TC_ACT_OK;
}
/* Manually attaching these programs:
export DEV=ixgbe2
export FILE=xdp2skb_meta_kern.o
# via TC command
tc qdisc del dev $DEV clsact 2> /dev/null
tc qdisc add dev $DEV clsact
tc filter add dev $DEV ingress prio 1 handle 1 bpf da obj $FILE sec tc_mark
tc filter show dev $DEV ingress
# XDP via IP command:
ip link set dev $DEV xdp off
ip link set dev $DEV xdp obj $FILE sec xdp_mark
# Use iptable to "see" if SKBs are marked
iptables -I INPUT -p icmp -m mark --mark 41 # == 0x29
iptables -I INPUT -p icmp -m mark --mark 42 # == 0x2a
# Hint: catch XDP_ABORTED errors via
perf record -e xdp:*
perf script
*/