AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
e54f8548ff
kernel_optimize_test/arch/arm/mach-pxa/Kconfig

701 lines
13 KiB
Plaintext
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if ARCH_PXA
[ARM] pxa: PXA3xx base support Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-12 10:13:17 +08:00
menu "Intel PXA2xx/PXA3xx Implementations"
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
[ARM] pxa: Stargate 2 board support Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-05-17 02:20:39 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config ARCH_LUBBOCK
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
bool "Intel DBPXA250 Development Platform (aka Lubbock)"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
select PXA25x
select SA1111
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
[ARM] 3417/1: add support for logicpd pxa270 card engine Patch from Lennert Buytenhek Add support for the LogicPD PXA270 Card Engine. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-29 04:08:13 +08:00
select PXA27x
[ARM] pxa: make LogicPD 270 use the generic PWM backlight driver Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-18 20:11:02 +08:00
select HAVE_PWM
[ARM] 3417/1: add support for logicpd pxa270 card engine Patch from Lennert Buytenhek Add support for the LogicPD PXA270 Card Engine. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-29 04:08:13 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_ZYLONITE
[ARM] pxa: introduce CONFIG_MACH_ZYLONITE{300,320} for CPU_PXA* removing Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-09 14:25:52 +08:00
bool
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
select PXA3xx
[ARM] pxa: make mainstone use the generic PWM backlight driver Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-14 04:47:01 +08:00
select HAVE_PWM
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[ARM] pxa: introduce CONFIG_MACH_ZYLONITE{300,320} for CPU_PXA* removing Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-09 14:25:52 +08:00
config MACH_ZYLONITE300
bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
select CPU_PXA300
select CPU_PXA310
select MACH_ZYLONITE
config MACH_ZYLONITE320
bool "PXA3xx Development Platform (aka Zylonite) PXA320"
select CPU_PXA320
select MACH_ZYLONITE
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
select PXA3xx
[ARM] pxa/littleton: select CPU_PXA300 and CPU_PXA310 This has to be selected, otherwise some peripherals don't get initialized. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-28 01:14:25 +08:00
select CPU_PXA300
select CPU_PXA310
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
select PXA3xx
select CPU_PXA930
ARM: pxa: append tavorevb3 support Bringup tavorevb3 development platform. UART and PMIC are enabled. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-09-08 21:42:40 +08:00
config MACH_TAVOREVB3
bool "PXA95x Development Platform (aka TavorEVB III)"
select CPU_PXA950
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select PXA3xx
select CPU_PXA930
ARM: pxa: support saarb platform Saarb platform is a handheld platform that supports Marvell PXA955 silicon. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-11-24 11:54:20 +08:00
config MACH_SAARB
bool "PXA955 Handheld Platform (aka SAARB)"
select CPU_PXA955
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
comment "Third Party Dev Platforms (sorted by vendor name)"
config ARCH_PXA_IDP
bool "Accelent Xscale IDP"
[ARM] 5277/1: Add basic support for MobilePro 900/c This patch adds basic support for the Mobilepro 900/c mini-laptop. At present it won't do much more than build and boot. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-03 03:15:35 +08:00
select PXA25x
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config ARCH_VIPER
bool "Arcom/Eurotech VIPER SBC"
select PXA25x
select ISA
select I2C_GPIO
select HAVE_PWM
select PXA_HAVE_ISA_IRQS
[ARM] pxa/zeus: make Viper pcmcia support more generic to support Zeus The Arcom Zeus CF slot requires the same kind of support as the Viper. To avoid code duplication, introduce a platform device that abstracts the differences. This also allows for the removal of the ugly export of viper_cf_rst(). Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-14 20:39:13 +08:00
select ARCOM_PCMCIA
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
[ARM] pxa/zeus: basic support for Arcom Zeus SBC Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-14 20:47:03 +08:00
config MACH_ARCOM_ZEUS
bool "Arcom/Eurotech ZEUS SBC"
select PXA27x
select ISA
select PXA_HAVE_ISA_IRQS
[ARM] pxa/zeus: make Viper pcmcia support more generic to support Zeus The Arcom Zeus CF slot requires the same kind of support as the Viper. To avoid code duplication, introduce a platform device that abstracts the differences. This also allows for the removal of the ugly export of viper_cf_rst(). Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-14 20:39:13 +08:00
select ARCOM_PCMCIA
[ARM] pxa/zeus: basic support for Arcom Zeus SBC Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-14 20:47:03 +08:00
[ARM] pxa: balloon3 (http://balloonboard.org/) base machine support So, again against latest pxa-linux-2.6/devel, with the following changes: * Move to __raw_readl/__raw_writel for FPGA/CPLD register access * Change Toppoly LCD config to be selectable at run time rather than compile time. * Remove currently unused irq device suspend/resume functions. * Strip out unnecessary/duplicated #includes. * Some code style cleanups. Balloon3 (http://balloonboard.org/) base machine support Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-07-04 21:43:56 +08:00
config MACH_BALLOON3
bool "Balloon 3 board"
select PXA27x
select IWMMXT
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_CSB726
bool "Enable Cogent CSB726 System On a Module"
select PXA27x
select IWMMXT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
Say Y here if you intend to run this kernel on a Cogent
CSB726 System On Module.
[ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific collie_pm was the only non-PXA user of sharpsl_pm. Now as it's gone we can merge code into one single file to allow further cleanup. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-28 23:18:51 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config CSB726_CSB701
bool "Enable support for CSB701 baseboard"
depends on MACH_CSB726
[ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig Separate building of corgi_ssp.c, and introduce a new hidden config option CONFIG_CORGI_SSP_DEPRECATED for this. Aslo mark corgi_ts.c and corgi_bl.c as deprecated. This unbreaks the legacy configs in {corgi,spitz}_defconfig, however, SPI based ADS7846 touchscreen driver and a new SPI-based corgi_lcd.c driver with integrated backlight support are recommended. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-21 11:36:19 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"
select PXA27x
select IWMMXT
[ARM] 5142/1: pxa: move move zaurus declarations to proper place Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-01 22:45:10 +08:00
select PXA25x
ARM: 6520/1: Kconfig: add new symbol MIGHT_HAVE_PCI Today more boards with arm cpu have selectable pci bus. This patch makes this more scalable and remove line continuations in Kconfig Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-02 19:32:15 +08:00
select MIGHT_HAVE_PCI
[ARM] 5142/1: pxa: move move zaurus declarations to proper place Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-01 22:45:10 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_EM_X270
bool "CompuLab EM-x270 platform"
[ARM] 5142/1: pxa: move move zaurus declarations to proper place Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-01 22:45:10 +08:00
select PXA27x
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_EXEDA
bool "CompuLab eXeda platform"
[ARM] 5142/1: pxa: move move zaurus declarations to proper place Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-01 22:45:10 +08:00
select PXA27x
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_CM_X300
bool "CompuLab CM-X300 modules"
select PXA3xx
select CPU_PXA300
[ARM] pxa/cm-x300: add PWM backlight support Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-10 20:18:41 +08:00
select CPU_PXA310
select HAVE_PWM
[ARM] 5142/1: pxa: move move zaurus declarations to proper place Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-01 22:45:10 +08:00
[ARM] pxa: add support for Embedian MXM-8x10 Signed-off-by: Edwin Peer <epeer@tmtservices.co.za> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-02-06 00:31:48 +08:00
config MACH_CAPC7117
bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
select CPU_PXA320
select PXA3xx
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config ARCH_GUMSTIX
bool "Gumstix XScale 255 boards"
Basic support for the Arcom/Eurotech Viper SBC. Signed-off-by: Marc Zyngier <marc.zyngier@altran.com>
2008-08-14 23:20:31 +08:00
select PXA25x
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
help
Say Y here if you intend to run this kernel on
Basix, Connex, ws-200ax, ws-400ax systems
[ARM] 5142/1: pxa: move move zaurus declarations to proper place Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-01 22:45:10 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
choice
prompt "Gumstix Carrier/Expansion Board"
depends on ARCH_GUMSTIX
[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. This patch contains the base code to boot the Toshiba e330, e740, e750, e400, and e800 PDAs. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-19 20:16:56 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config GUMSTIX_AM200EPD
bool "Enable AM200EPD board support"
[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. This patch contains the base code to boot the Toshiba e330, e740, e750, e400, and e800 PDAs. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-19 20:16:56 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config GUMSTIX_AM300EPD
bool "Enable AM300EPD board support"
Add e350 support Signed-off-by: Ian Molton <spyro@f2s.com>
2008-06-26 05:39:31 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
endchoice
[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. This patch contains the base code to boot the Toshiba e330, e740, e750, e400, and e800 PDAs. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-19 20:16:56 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_INTELMOTE2
bool "Intel Mote 2 Platform"
select PXA27x
select IWMMXT
[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. This patch contains the base code to boot the Toshiba e330, e740, e750, e400, and e800 PDAs. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-19 20:16:56 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_STARGATE2
bool "Intel Stargate 2 Platform"
select PXA27x
select IWMMXT
[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. This patch contains the base code to boot the Toshiba e330, e740, e750, e400, and e800 PDAs. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-19 20:16:56 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_XCEP
bool "Iskratel Electronics XCEP"
select PXA25x
select MTD
select MTD_PARTITIONS
select MTD_PHYSMAP
select MTD_CFI_INTELEXT
select MTD_CFI
select MTD_CHAR
select SMC91X
[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. This patch contains the base code to boot the Toshiba e330, e740, e750, e400, and e800 PDAs. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-19 20:16:56 +08:00
help
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
Tuned for usage in Libera instruments for particle accelerators.
[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. This patch contains the base code to boot the Toshiba e330, e740, e750, e400, and e800 PDAs. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-19 20:16:56 +08:00
[ARM] 5204/1: Trizeps4 SOM update - use MFP-API for GPIO - support TRIZEPS4WL module - cleanups Signed-off-by: Jrgen Schindele <linux@schindele.name> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-19 04:45:03 +08:00
config TRIZEPS_PXA
bool "PXA based Keith und Koep Trizeps DIMM-Modules"
[ARM] 3666/1: TRIZEPS4 [1/5] core Patch from Jrgen Schindele This patch adds support for Trizeps4 SoM and ConXS-evalboard from "Keith und Koep" This DIMM-module is based on PXA270. Signed-off-by: Jrgen Schindele <linux@schindele.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 23:01:43 +08:00
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
[ARM] 5204/1: Trizeps4 SOM update - use MFP-API for GPIO - support TRIZEPS4WL module - cleanups Signed-off-by: Jrgen Schindele <linux@schindele.name> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-19 04:45:03 +08:00
depends on TRIZEPS_PXA
select TRIZEPS_PCMCIA
[ARM] 3666/1: TRIZEPS4 [1/5] core Patch from Jrgen Schindele This patch adds support for Trizeps4 SoM and ConXS-evalboard from "Keith und Koep" This DIMM-module is based on PXA270. Signed-off-by: Jrgen Schindele <linux@schindele.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 23:01:43 +08:00
select PXA27x
[ARM] 5204/1: Trizeps4 SOM update - use MFP-API for GPIO - support TRIZEPS4WL module - cleanups Signed-off-by: Jrgen Schindele <linux@schindele.name> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-19 04:45:03 +08:00
config MACH_TRIZEPS4WL
bool "Keith und Koep Trizeps4-WL DIMM-Module"
depends on TRIZEPS_PXA
select TRIZEPS_PCMCIA
[ARM] 3666/1: TRIZEPS4 [1/5] core Patch from Jrgen Schindele This patch adds support for Trizeps4 SoM and ConXS-evalboard from "Keith und Koep" This DIMM-module is based on PXA270. Signed-off-by: Jrgen Schindele <linux@schindele.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 23:01:43 +08:00
select PXA27x
[ARM] 5204/1: Trizeps4 SOM update - use MFP-API for GPIO - support TRIZEPS4WL module - cleanups Signed-off-by: Jrgen Schindele <linux@schindele.name> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-19 04:45:03 +08:00
choice
prompt "Select base board for Trizeps module"
depends on TRIZEPS_PXA
[ARM] 3666/1: TRIZEPS4 [1/5] core Patch from Jrgen Schindele This patch adds support for Trizeps4 SoM and ConXS-evalboard from "Keith und Koep" This DIMM-module is based on PXA270. Signed-off-by: Jrgen Schindele <linux@schindele.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 23:01:43 +08:00
[ARM] 5204/1: Trizeps4 SOM update - use MFP-API for GPIO - support TRIZEPS4WL module - cleanups Signed-off-by: Jrgen Schindele <linux@schindele.name> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-19 04:45:03 +08:00
config MACH_TRIZEPS_CONXS
[ARM] 5143/1: pxa: further cleanup PXA Kconfig by removing one unnecessary menu level Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-02 20:50:09 +08:00
bool "ConXS Eval Board"
[ARM] 5204/1: Trizeps4 SOM update - use MFP-API for GPIO - support TRIZEPS4WL module - cleanups Signed-off-by: Jrgen Schindele <linux@schindele.name> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-19 04:45:03 +08:00
config MACH_TRIZEPS_UCONXS
bool "uConXS Eval Board"
config MACH_TRIZEPS_ANY
bool "another Board"
endchoice
[ARM] pxa/zeus: make Viper pcmcia support more generic to support Zeus The Arcom Zeus CF slot requires the same kind of support as the Viper. To avoid code duplication, introduce a platform device that abstracts the differences. This also allows for the removal of the ugly export of viper_cf_rst(). Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-14 20:39:13 +08:00
config ARCOM_PCMCIA
bool
help
Generic option for Arcom Viper/Zeus PCMCIA
[ARM] 5204/1: Trizeps4 SOM update - use MFP-API for GPIO - support TRIZEPS4WL module - cleanups Signed-off-by: Jrgen Schindele <linux@schindele.name> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-19 04:45:03 +08:00
config TRIZEPS_PCMCIA
bool
help
Enable PCMCIA support for Trizeps modules
[ARM] 5143/1: pxa: further cleanup PXA Kconfig by removing one unnecessary menu level Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-02 20:50:09 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_LOGICPD_PXA270
bool "LogicPD PXA270 Card Engine Development Platform"
[ARM] pxa: add eXeda platform support Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-02-02 14:57:55 +08:00
select PXA27x
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
select HAVE_PWM
[ARM] pxa: add eXeda platform support Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-02-02 14:57:55 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_PCM027
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
[ARM] 4762/1: Basic support for Toradex Colibri module This patch adds support for Toradex' PXA27x based Colibri module. It's kept as simple as possible to only provide basic functionality. A default config is also included. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-23 21:54:50 +08:00
select PXA27x
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
select IWMMXT
[ARM] 4762/1: Basic support for Toradex Colibri module This patch adds support for Toradex' PXA27x based Colibri module. It's kept as simple as possible to only provide basic functionality. A default config is also included. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-23 21:54:50 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
select HAVE_PWM
depends on MACH_PCM027
[ARM] pxa: add basic support for Colibri PXA300 module This patch add basic support for Toradex' Colibri PXA300 module. Ethernet is enabled conditionally, depdending on CONFIG_AX88796. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-13 23:37:09 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
choice
prompt "display on pcm990"
depends on MACH_PCM990_BASEBOARD
[ARM] pxa: Colibri PXA320 module basics This adds basic support for Colibri PXA320 modules. The file colibri-320.c only contains settings specific to this module, such as the Ethernet interface. Cc: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 09:04:18 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config PCM990_DISPLAY_SHARP
bool "sharp lq084v1dg21 stn display"
[ARM] pxa: PXA3xx base support Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-12 10:13:17 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config PCM990_DISPLAY_NEC
bool "nec nl6448bc20_18d tft display"
[ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform) Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-12-13 10:41:43 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config PCM990_DISPLAY_NONE
bool "no display"
[ARM] pxa: add base support for PXA930 Evaluation Board (aka TavorEVB) Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-11 12:59:38 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
endchoice
[ARM] pxa: add base support for PXA930 Handheld Platform (aka SAAR) Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-11 14:02:20 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_COLIBRI
bool "Toradex Colibri PXA270"
[ARM] 4576/1: CM-X270 machine support This patch provides core support for CM-X270 platform. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-23 22:59:26 +08:00
select PXA27x
[ARM] pxa/income: Add Income SBC support This is support for custom design based on Toradex Colibri PXA270 CPU card. Initial patch was by Pavel Revak. [daniel - rebased the code to follow the module/board split] Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Pavel Revak <palo@bielyvlk.sk> Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-22 06:29:39 +08:00
config MACH_COLIBRI_PXA270_INCOME
bool "Income s.r.o. PXA270 SBC"
depends on MACH_COLIBRI
select PXA27x
select HAVE_PWM
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_COLIBRI300
bool "Toradex Colibri PXA300/310"
[ARM] 5215/2: Add support for CM-X300 board This patch adds core support for CM-X300 board based on PXA300 processor Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-26 21:03:44 +08:00
select PXA3xx
select CPU_PXA300
[ARM] pxa: select CPU_PXA310 for MACH_COLIBRI300 MACH_COLIBRI300 is supposed to support both PXA300 and PXA310, select the missing CPU_PXA310. Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de>
2009-11-09 14:40:47 +08:00
select CPU_PXA310
[ARM] 4576/1: CM-X270 machine support This patch provides core support for CM-X270 platform. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-23 22:59:26 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_COLIBRI320
bool "Toradex Colibri PXA320"
select PXA3xx
select CPU_PXA320
ARM: pxa: Rename Colibri evalboard Rename colibri-pxa270-evalboard to colibri-evalboard as this board is used with all Colibri modules. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-12 07:45:05 +08:00
config MACH_COLIBRI_EVALBOARD
ARM: pxa: Push Colibri evalboard MFP into module files This change -- pushing the MFP configuration back into Module files -- is necessary because some evalboards can be used with multiple modules, where MFP differs from module to module. Therefore MFP isn't board-specific, but module-specific and the module should preconfigure itself for the board. (And there is also the C preprocesor limitation and conflicting #define-s) Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-12 07:18:38 +08:00
bool "Toradex Colibri Evaluation Carrier Board support"
depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
[ARM] pxa: add basic support for Voipac PXA270 SBC This patch adds basic support for the Voipac PXA270 SBC. The device consists of the following hardware: - PXA270 @ 520 MHz - 256MB RAM (sparsemem, 2*128MB regions) - 64MB NOR flash - 640x480 LCD - Ports: 2xUHC, 1xUDC, 1xPCMCIA, VGA, FFUART, 2xPS2, Speaker, MIC Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-09 11:04:12 +08:00
config MACH_VPAC270
bool "Voipac PXA270"
select PXA27x
[ARM] pxa/vpac270: add ide support This patch adds support for the on-board IDE channel. I tested this with a CDROM connected over 2.5-3.5 IDE reduction with external power supplied to the CDROM. This was not tested with the Voipac 270-HDD-000 (official Voipac HDD module), but I expect no problems. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-04-27 03:46:07 +08:00
select HAVE_PATA_PLATFORM
[ARM] pxa: add basic support for Voipac PXA270 SBC This patch adds basic support for the Voipac PXA270 SBC. The device consists of the following hardware: - PXA270 @ 520 MHz - 256MB RAM (sparsemem, 2*128MB regions) - 64MB NOR flash - 640x480 LCD - Ports: 2xUHC, 1xUDC, 1xPCMCIA, VGA, FFUART, 2xPS2, Speaker, MIC Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-09 11:04:12 +08:00
help
PXA270 based Single Board Computer.
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
comment "End-user Products (sorted by vendor name)"
[ARM] pxa: add basic support for HP iPAQ hx4700 PDAs This includes - IrDA (pxafixp_ir), - Buttons (gpio-keys), - ASIC3 IRQ/GPIOs (asic3), - EGPIOs (htc-egpio), - ATI Imageon w3220 framebuffer (w100fb), - Backlight (pwm-backlight), - StrataFlash (physmap), - Battery monitor (ds1wm,w1_ds2760,ds2760_battery) - USB gadget support (pxa27x_udc,gpio_vbus). - bq24022 battery charger (pda_power,bq24022) - TSC2046 touchscreen (ads7846) Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-05-28 13:05:18 +08:00
config MACH_H4700
bool "HP iPAQ hx4700"
select PXA27x
select IWMMXT
select HAVE_PWM
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_H5000
bool "HP iPAQ h5000"
select PXA25x
config MACH_HIMALAYA
bool "HTC Himalaya Support"
select CPU_PXA26x
[ARM] 4664/1: Add basic support for HTC Magician PDA phones This includes irda, gpio keys, pxafb, backlight, ohci and flash (read-only). Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-23 00:59:11 +08:00
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
select PXA27x
select IWMMXT
[ARM] pxa/magician: Enable backlight Magician uses the generic PWM backlight driver, so select HAVE_PWM. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-18 01:45:40 +08:00
select HAVE_PWM
[ARM] 4664/1: Add basic support for HTC Magician PDA phones This includes irda, gpio keys, pxafb, backlight, ohci and flash (read-only). Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-23 00:59:11 +08:00
[ARM] 5202/1: pxa: Added Mitac Mio A701 smartphone support. The Mio A701 support features : - GSM support - Bluetooth support - GPS support - LED/Vibrator support - Suspend/Resume support (very dependant on Mio FlashRam) - Screen/Backlight support - Keys/Keyboard support - USB udc support - MMC/SDIO support - Flash Memory support - Battery/AC plugin support Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-17 16:34:30 +08:00
config MACH_MIOA701
bool "Mitac Mio A701 Support"
select PXA27x
select IWMMXT
select HAVE_PWM
select GPIO_SYSFS
help
Say Y here if you intend to run this kernel on a
MIO A701. Currently there is only basic support
for this PDA.
[ARM] 4664/1: Add basic support for HTC Magician PDA phones This includes irda, gpio keys, pxafb, backlight, ohci and flash (read-only). Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-23 00:59:11 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config PXA_EZX
bool "Motorola EZX Platform"
[ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module This patch adds main support for the generic phyCORE-PXA270 CPU module (aka PCM-027). Its as generic as possible to support any kind of baseboard. Note: Neither the CPU module nor the pcm027.c implementation can work without a baseboard support. Baseboard support can be added by the PCM-990 or any custom variant. V2: After comments by Eric Miao: - Currently unsupported devices moved into separate patch - direct call of baseboard initialisation V3: After comments by Russell King - sort include files - setting RTC bit for power control removed - style problems fixed (discovered by checkpatch.pl) Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-08 15:44:23 +08:00
select PXA27x
select IWMMXT
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
select HAVE_PWM
[ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module This patch adds main support for the generic phyCORE-PXA270 CPU module (aka PCM-027). Its as generic as possible to support any kind of baseboard. Note: Neither the CPU module nor the pcm027.c implementation can work without a baseboard support. Baseboard support can be added by the PCM-990 or any custom variant. V2: After comments by Eric Miao: - Currently unsupported devices moved into separate patch - direct call of baseboard initialisation V3: After comments by Russell King - sort include files - setting RTC bit for power control removed - style problems fixed (discovered by checkpatch.pl) Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-08 15:44:23 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_EZX_A780
bool "Motorola EZX A780"
default y
depends on PXA_EZX
config MACH_EZX_E680
bool "Motorola EZX E680"
default y
depends on PXA_EZX
config MACH_EZX_A1200
bool "Motorola EZX A1200"
default y
depends on PXA_EZX
config MACH_EZX_A910
bool "Motorola EZX A910"
default y
depends on PXA_EZX
config MACH_EZX_E6
bool "Motorola EZX E6"
default y
depends on PXA_EZX
config MACH_EZX_E2
bool "Motorola EZX E2"
default y
depends on PXA_EZX
config MACH_MP900C
bool "Nec Mobilepro 900/c"
select PXA25x
[ARM] 5153/1: Add support for PalmTX handheld computer PalmTX is PXA27x based device with wifi, bluetooth, touchscreen, sdio slot, irda, keypad, nand flash, pxa framebuffer, serial and usb gadget interface. Supported by this patch is pxafb, touchscreen, irda, keypad and sdio slot. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-08 00:25:46 +08:00
config ARCH_PXA_PALM
bool "PXA based Palm PDAs"
select HAVE_PWM
[ARM] pxa/palm: Introduce Palm27x This contains common code for Palm LD, TX, T5, Z72, Treo680, Centro This code also adds PMIC support for all the devices, Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-07-13 20:08:57 +08:00
config MACH_PALM27X
bool
[ARM] pxa: Palm Tungsten E2 basic support This contains support for keypad, MMC, AC97, LCD and backlight. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-24 07:29:29 +08:00
config MACH_PALMTE2
bool "Palm Tungsten|E2"
default y
depends on ARCH_PXA_PALM
select PXA25x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|E2
handheld computer.
[ARM] pxa: Palm Tungsten|C initial support This patch adds basic support for Palm Tungsten|C handheld. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-07-16 19:26:48 +08:00
config MACH_PALMTC
bool "Palm Tungsten|C"
default y
depends on ARCH_PXA_PALM
select PXA25x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|C
handheld computer.
[ARM] pxa: PalmT5 initial support Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-20 07:58:38 +08:00
config MACH_PALMT5
bool "Palm Tungsten|T5"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
[ARM] pxa/palm: Flip Palm LD,TX,T5,Z72 to Palm27x Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-07-13 14:16:45 +08:00
select MACH_PALM27X
[ARM] pxa: PalmT5 initial support Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-20 07:58:38 +08:00
help
Say Y here if you intend to run this kernel on a Palm Tungsten|T5
handheld computer.
[ARM] 5153/1: Add support for PalmTX handheld computer PalmTX is PXA27x based device with wifi, bluetooth, touchscreen, sdio slot, irda, keypad, nand flash, pxa framebuffer, serial and usb gadget interface. Supported by this patch is pxafb, touchscreen, irda, keypad and sdio slot. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-08 00:25:46 +08:00
config MACH_PALMTX
bool "Palm T|X"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
[ARM] pxa/palm: Flip Palm LD,TX,T5,Z72 to Palm27x Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-07-13 14:16:45 +08:00
select MACH_PALM27X
[ARM] 5153/1: Add support for PalmTX handheld computer PalmTX is PXA27x based device with wifi, bluetooth, touchscreen, sdio slot, irda, keypad, nand flash, pxa framebuffer, serial and usb gadget interface. Supported by this patch is pxafb, touchscreen, irda, keypad and sdio slot. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-08 00:25:46 +08:00
help
Say Y here if you intend to run this kernel on a Palm T|X
handheld computer.
[ARM] 5238/2: Very basic Palm Zire 72 support This patch contains very basic support of Palm Zire 72. Signed-off-by: Sergey Lapin <slapin@ossfans.org> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-29 22:47:52 +08:00
config MACH_PALMZ72
bool "Palm Zire 72"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
[ARM] pxa/palm: Flip Palm LD,TX,T5,Z72 to Palm27x Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-07-13 14:16:45 +08:00
select MACH_PALM27X
[ARM] 5238/2: Very basic Palm Zire 72 support This patch contains very basic support of Palm Zire 72. Signed-off-by: Sergey Lapin <slapin@ossfans.org> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-29 22:47:52 +08:00
help
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
[ARM] pxa: PalmLD initial support Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-21 05:50:46 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_PALMLD
bool "Palm LifeDrive"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
[ARM] pxa/palm: Flip Palm LD,TX,T5,Z72 to Palm27x Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-07-13 14:16:45 +08:00
select MACH_PALM27X
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
help
Say Y here if you intend to run this kernel on a Palm LifeDrive
handheld computer.
[ARM] pxa/treo: generalisation of Treo680 code Signed-off-by: Tomáš Čech <sleep_walker@suse.cz> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-11 19:57:01 +08:00
config PALM_TREO
bool
depends on ARCH_PXA_PALM
[ARM] pxa/treo: add Palm Centro 685 support Signed-off-by: Tomáš Čech <sleep_walker@suse.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-11 19:57:02 +08:00
config MACH_CENTRO
bool "Palm Centro 685 (GSM)"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
select PALM_TREO
help
Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
smartphone.
[ARM] pxa/treo680: initial support Signed-off-by: Tomáš Čech <sleep_walker@suse.cz> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-05-18 21:24:14 +08:00
config MACH_TREO680
bool "Palm Treo 680"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
[ARM] pxa/treo: generalisation of Treo680 code Signed-off-by: Tomáš Čech <sleep_walker@suse.cz> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-11 19:57:01 +08:00
select PALM_TREO
[ARM] pxa/treo680: initial support Signed-off-by: Tomáš Čech <sleep_walker@suse.cz> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-05-18 21:24:14 +08:00
help
Say Y here if you intend to run this kernel on Palm Treo 680
smartphone.
[ARM] pxa/raumfeld: add platform support This adds support for Raumfeld's 'Controller', 'Connector', 'Speaker S' and 'Speaker M' devices. They're all based on PXA303 SoCs. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-27 20:47:09 +08:00
config MACH_RAUMFELD_RC
bool "Raumfeld Controller"
select PXA3xx
select CPU_PXA300
select HAVE_PWM
config MACH_RAUMFELD_CONNECTOR
bool "Raumfeld Connector"
select PXA3xx
select CPU_PXA300
config MACH_RAUMFELD_SPEAKER
bool "Raumfeld Speaker"
select PXA3xx
select CPU_PXA300
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config PXA_SHARPSL
bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
select SHARP_SCOOP
select SHARP_PARAM
[ARM] pxa: PalmLD initial support Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-21 05:50:46 +08:00
help
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
Say Y here if you intend to run this kernel on a
Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
[ARM] pxa: PalmLD initial support Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-21 05:50:46 +08:00
handheld computer.
[ARM] 5238/2: Very basic Palm Zire 72 support This patch contains very basic support of Palm Zire 72. Signed-off-by: Sergey Lapin <slapin@ossfans.org> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-29 22:47:52 +08:00
[ARM] pxa: PXA_SHARPSL_DETECT_MACH_ID to include head-sharpsl.S With kexec-based kernel boot loader on Zaurus, the machine ID is actually correctly passed, and head-sharpsl.S is not necessary. Introduce PXA_SHARPSL_DETECT_MACH_ID, and include head-sharpsl.S only when that's explicitly enabled. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-23 09:27:32 +08:00
config PXA_SHARPSL_DETECT_MACH_ID
bool "Detect machine ID at run-time in the decompressor"
depends on PXA_SHARPSL
help
Say Y here if you want the zImage decompressor to detect
the Zaurus machine ID at run-time. For latest kexec-based
boot loader, this is not necessary.
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
depends on PXA_SHARPSL
select PXA25x
select SHARP_LOCOMO
[PATCH] SharpSL: Add new ARM PXA machines Spitz and Borzoi with partial Akita Support Add the platform support code for two new Sharp Zaurus Models, Spitz (SL-C3000) and Borzoi (SL-C3100). This patch also adds most of the foundations for Akita (SL-C1000) Support. The missing link for Akita is the driver for its I2C io expander. Once this has been finished, the missing Kconfig option and machine declaration can easily be added to this code. Signed-Off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 16:25:34 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_CORGI
bool "Enable Sharp SL-C700 (Corgi) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
[PATCH] SharpSL: Add new ARM PXA machines Spitz and Borzoi with partial Akita Support Add the platform support code for two new Sharp Zaurus Models, Spitz (SL-C3000) and Borzoi (SL-C3100). This patch also adds most of the foundations for Akita (SL-C1000) Support. The missing link for Akita is the driver for its I2C io expander. Once this has been finished, the missing Kconfig option and machine declaration can easily be added to this code. Signed-Off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 16:25:34 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_SHEPHERD
bool "Enable Sharp SL-C750 (Shepherd) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
[PATCH] SharpSL: Add new ARM PXA machines Spitz and Borzoi with partial Akita Support Add the platform support code for two new Sharp Zaurus Models, Spitz (SL-C3000) and Borzoi (SL-C3100). This patch also adds most of the foundations for Akita (SL-C1000) Support. The missing link for Akita is the driver for its I2C io expander. Once this has been finished, the missing Kconfig option and machine declaration can easily be added to this code. Signed-Off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 16:25:34 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_HUSKY
bool "Enable Sharp SL-C760 (Husky) Support"
depends on PXA_SHARPSL
select PXA25x
select PXA_SHARP_C7xx
[PATCH] SharpSL: Add new ARM PXA machines Spitz and Borzoi with partial Akita Support Add the platform support code for two new Sharp Zaurus Models, Spitz (SL-C3000) and Borzoi (SL-C3100). This patch also adds most of the foundations for Akita (SL-C1000) Support. The missing link for Akita is the driver for its I2C io expander. Once this has been finished, the missing Kconfig option and machine declaration can easily be added to this code. Signed-Off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 16:25:34 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_AKITA
bool "Enable Sharp SL-1000 (Akita) Support"
depends on PXA_SHARPSL
[ARM] pxa: add initial support for Cogent CSB726 board Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-02-17 01:40:55 +08:00
select PXA27x
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
select PXA_SHARP_Cxx00
select MACH_SPITZ
select I2C
select I2C_PXA
[ARM] pxa: add initial support for Cogent CSB726 board Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-02-17 01:40:55 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_SPITZ
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
depends on PXA_SHARPSL
select PXA27x
select PXA_SHARP_Cxx00
[ARM] pxa: add support for CSB701 baseboard CSB701 is one of baseboards that can be used with CSB726 SOM. This currently adds support for button and LED on the board. More to come later. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-02-17 01:40:57 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_BORZOI
bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
depends on PXA_SHARPSL
[ARM] 5162/1: Common code for the Motorola EZX GSM phones Common code for the different EZX GSM phones. Functions to control framebuffer, backlight power, OHCI and UART init. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09 15:08:17 +08:00
select PXA27x
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
select PXA_SHARP_Cxx00
config MACH_TOSA
bool "Enable Sharp SL-6000x (Tosa) Support"
depends on PXA_SHARPSL
select PXA25x
[ARM] 5162/1: Common code for the Motorola EZX GSM phones Common code for the different EZX GSM phones. Functions to control framebuffer, backlight power, OHCI and UART init. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09 15:08:17 +08:00
[ARM] pxa: move hidden Kconfig options to right place and vice versa 1. TOSA related un-hidden options moved to right under MACH_TOSA 2. SHARPSL_PM related hidden options moved to the end of Kconfig Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-22 17:15:32 +08:00
config TOSA_BT
tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
depends on MACH_TOSA
select RFKILL
help
This is a simple driver that is able to control
the state of built in bluetooth chip on tosa.
config TOSA_USE_EXT_KEYCODES
bool "Tosa keyboard: use extended keycodes"
depends on MACH_TOSA
default n
help
Say Y here to enable the tosa keyboard driver to generate extended
(>= 127) keycodes. Be aware, that they can't be correctly interpreted
by either console keyboard driver or by Kdrive keybd driver.
Say Y only if you know, what you are doing!
[ARM] pxa: add support for Embedian MXM-8x10 Signed-off-by: Edwin Peer <epeer@tmtservices.co.za> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-02-06 00:31:48 +08:00
config MACH_ICONTROL
bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
select CPU_PXA320
select PXA3xx
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select PXA25x
ARM: pxa: PXA_ESERIES depends on FB_W100. As arch/arm/mach-pxa/eseries.c references w100fb_gpio_{read,write}() directly. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-15 07:20:16 +08:00
select FB_W100
[ARM] 5162/1: Common code for the Motorola EZX GSM phones Common code for the different EZX GSM phones. Functions to control framebuffer, backlight power, OHCI and UART init. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09 15:08:17 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_E330
bool "Toshiba e330"
[ARM] 5162/1: Common code for the Motorola EZX GSM phones Common code for the different EZX GSM phones. Functions to control framebuffer, backlight power, OHCI and UART init. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09 15:08:17 +08:00
default y
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e330 family PDA.
[ARM] 5162/1: Common code for the Motorola EZX GSM phones Common code for the different EZX GSM phones. Functions to control framebuffer, backlight power, OHCI and UART init. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09 15:08:17 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_E350
bool "Toshiba e350"
[ARM] 5162/1: Common code for the Motorola EZX GSM phones Common code for the different EZX GSM phones. Functions to control framebuffer, backlight power, OHCI and UART init. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09 15:08:17 +08:00
default y
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e350 family PDA.
[ARM] 5162/1: Common code for the Motorola EZX GSM phones Common code for the different EZX GSM phones. Functions to control framebuffer, backlight power, OHCI and UART init. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09 15:08:17 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_E740
bool "Toshiba e740"
[ARM] 5162/1: Common code for the Motorola EZX GSM phones Common code for the different EZX GSM phones. Functions to control framebuffer, backlight power, OHCI and UART init. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09 15:08:17 +08:00
default y
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e740 family PDA.
[ARM] 5162/1: Common code for the Motorola EZX GSM phones Common code for the different EZX GSM phones. Functions to control framebuffer, backlight power, OHCI and UART init. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09 15:08:17 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_E750
bool "Toshiba e750"
[ARM] 5162/1: Common code for the Motorola EZX GSM phones Common code for the different EZX GSM phones. Functions to control framebuffer, backlight power, OHCI and UART init. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09 15:08:17 +08:00
default y
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e750 family PDA.
[ARM] 5162/1: Common code for the Motorola EZX GSM phones Common code for the different EZX GSM phones. Functions to control framebuffer, backlight power, OHCI and UART init. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09 15:08:17 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_E400
bool "Toshiba e400"
[ARM] 5162/1: Common code for the Motorola EZX GSM phones Common code for the different EZX GSM phones. Functions to control framebuffer, backlight power, OHCI and UART init. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09 15:08:17 +08:00
default y
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e400 family PDA.
[ARM] 5162/1: Common code for the Motorola EZX GSM phones Common code for the different EZX GSM phones. Functions to control framebuffer, backlight power, OHCI and UART init. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09 15:08:17 +08:00
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
config MACH_E800
bool "Toshiba e800"
default y
depends on ARCH_PXA_ESERIES
[ARM] pxa: add support for the IskraTel XCEP board Added support for the Iskratel XCEP single board computer, embedded in instruments used in particle accelerators. The patch contains the platform specific code, Makefile and Kconfig changes for platform arm-pxa. Signed-off-by: Aleš Bardorfer <ales.bardorfer@i-tech.si> Signed-off-by: Michael Abbott <michael.abbott@diamond.ac.uk> Signed-off-by: Matej Kenda <matej.kenda@i-tech.si> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-07 14:08:34 +08:00
help
[ARM] pxa: re-order platforms in Kconfig and Makefile Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted in the following order: 1. By category: Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed by end-user products (this is to ensure the commonly referenced platforms will appear first) 2. By vendor name in alphabetic within each category (this is to ensure code reuse and similar platforms can be grouped as much as possible) VENDOR BOARD Intel/Marvell Lubbock Intel/Marvell Mainstone Intel/Marvell Zylonite Intel/Marvell Littleton Intel/Marvell TavorEVB Intel/Marvell SAAR Accelent IDP Arcom/Eurotech VIPER Community Balloon3 Cogent CSB726 CompuLab EM_X270 CompuLab EXEDA CompuLab ARMCORE CompuLab CM_X300 Gumstix Gumstix Intel Research MOTE2 Intel research Stargate2 Iskratel XCEP Keith and Koep Trizeps4 LogicPD LPD270 Phytec PCM027 Toradex Colibri HP HX4700 HP H5000 HTC Himalaya HTC Magician Mitac MioA701 Motorola EZX NEC MP900C Palm Palm PDA Palm Palm GSM Sharp Zaurus Toshiba E-Series Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 09:32:07 +08:00
Say Y here if you intend to run this kernel on a Toshiba
e800 family PDA.
[ARM] pxa: add support for the IskraTel XCEP board Added support for the Iskratel XCEP single board computer, embedded in instruments used in particle accelerators. The patch contains the platform specific code, Makefile and Kconfig changes for platform arm-pxa. Signed-off-by: Aleš Bardorfer <ales.bardorfer@i-tech.si> Signed-off-by: Michael Abbott <michael.abbott@diamond.ac.uk> Signed-off-by: Matej Kenda <matej.kenda@i-tech.si> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-07 14:08:34 +08:00
[ARM] pxa: add basic support for the Aeronix Zipit Z2 handheld This patch adds support for the Zipit Z2. The parts missing from this patch are the battery support, SPI driver for the LCD and support for the Silicon Serial ID chip. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-02-28 19:41:23 +08:00
config MACH_ZIPIT2
bool "Zipit Z2 Handheld"
select PXA27x
select HAVE_PWM
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
endmenu
config PXA25x
bool
[ARM] Arrange for platforms to select appropriate CPU support Rather than: config CPU_BLAH bool depends on ARCH_FOO || MACH_BAR default y if ARCH_FOO || MACH_BAR arrange for ARCH_FOO and MACH_BAR to select CPU_BLAH directly. Acked-by: Nicolas Pitre <nico@marvell.com> Acked-by: Andrew Victor <linux@maxim.org.za> Acked-by: Brian Swetland <swetland@google.com> Acked-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Bellido <ml@acolin.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-26 18:55:14 +08:00
select CPU_XSCALE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
Select code specific to PXA21x/25x/26x variants
config PXA27x
bool
[ARM] Arrange for platforms to select appropriate CPU support Rather than: config CPU_BLAH bool depends on ARCH_FOO || MACH_BAR default y if ARCH_FOO || MACH_BAR arrange for ARCH_FOO and MACH_BAR to select CPU_BLAH directly. Acked-by: Nicolas Pitre <nico@marvell.com> Acked-by: Andrew Victor <linux@maxim.org.za> Acked-by: Brian Swetland <swetland@google.com> Acked-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Bellido <ml@acolin.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-26 18:55:14 +08:00
select CPU_XSCALE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
Select code specific to PXA27x variants
[ARM] pxa: add support for additional GPIOs on PXA26x Original patch from Marek Vasut, the problems with PXA26x are: 1. there are additional 4 GPIOs 86,87,88,89 have their direction bits inverted in GPDR2, as well as their alternate function bits being '1' for their GPIO functionality in GAFRx 2. there is no easy way to decide if the processor is a pxa26x or a pxa250/pxa255 at run-time, so the assumption here is the pxa26x will be treated as one of the pxa25x variants, and board code should have a better knowledge of the processor it is featured Introduce pxa26x_init_irq() for the second purpose, and treat the additional GPIOs > 85 on PXA25x specially. Kconfig option CONFIG_CPU_PXA26x is introduced to optimize the code a bit when PXA26x support isn't needed. Board config options have to select this to enable the support for PXA26x. __gpio_is_inverted() will be optimized way when CONFIG_CPU_PXA26x isn't selected. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-26 18:12:04 +08:00
config CPU_PXA26x
bool
select PXA25x
help
Select code specific to PXA26x (codename Dalhart)
[ARM] pxa: PXA3xx base support Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-12 10:13:17 +08:00
config PXA3xx
bool
[ARM] Arrange for platforms to select appropriate CPU support Rather than: config CPU_BLAH bool depends on ARCH_FOO || MACH_BAR default y if ARCH_FOO || MACH_BAR arrange for ARCH_FOO and MACH_BAR to select CPU_BLAH directly. Acked-by: Nicolas Pitre <nico@marvell.com> Acked-by: Andrew Victor <linux@maxim.org.za> Acked-by: Brian Swetland <swetland@google.com> Acked-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Bellido <ml@acolin.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-26 18:55:14 +08:00
select CPU_XSC3
[ARM] pxa: PXA3xx base support Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-12 10:13:17 +08:00
help
Select code specific to PXA3xx variants
[ARM] pxa: make CPU_PXA* to be selectable hidden options CONFIG_CPU_PXA{300,310,320,930,935,950} are really platform dependent and should be made into selectable hidden options. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-09 14:37:59 +08:00
config CPU_PXA300
bool
select PXA3xx
help
PXA300 (codename Monahans-L)
config CPU_PXA310
bool
select CPU_PXA300
ARM: pxa: add U2D controller and ULPI driver for pxa3xx USB2.0 Device Controller (U2DC) which is found in Marvell PXA3xx. U2DC supports both High and Full speed modes. PXA320 and PXA300 U2DC supports only UTMI interface. PXA310 U2DC supports only ULPI interface and has the OTG capability. U2D Controller ULPI driver introduced in this patch supports only the PXA310 USB Host via the ULPI. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-07-27 20:06:58 +08:00
select PXA310_ULPI if USB_ULPI
[ARM] pxa: make CPU_PXA* to be selectable hidden options CONFIG_CPU_PXA{300,310,320,930,935,950} are really platform dependent and should be made into selectable hidden options. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-09 14:37:59 +08:00
help
PXA310 (codename Monahans-LV)
config CPU_PXA320
bool
select PXA3xx
help
PXA320 (codename Monahans-P)
config CPU_PXA930
bool
select PXA3xx
help
PXA930 (codename Tavor-P)
config CPU_PXA935
bool
select CPU_PXA930
help
PXA935 (codename Tavor-P65)
ARM: pxa: support pxa95x The core of PXA955 is PJ4. Add new PJ4 support. And add new macro CONFIG_PXA95x. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-11-24 11:54:19 +08:00
config PXA95x
[ARM] pxa: make CPU_PXA* to be selectable hidden options CONFIG_CPU_PXA{300,310,320,930,935,950} are really platform dependent and should be made into selectable hidden options. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-09 14:37:59 +08:00
bool
ARM: pxa: support pxa95x The core of PXA955 is PJ4. Add new PJ4 support. And add new macro CONFIG_PXA95x. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-11-24 11:54:19 +08:00
select CPU_PJ4
help
Select code specific to PXA95x variants
config CPU_PXA955
bool
select PXA95x
[ARM] pxa: make CPU_PXA* to be selectable hidden options CONFIG_CPU_PXA{300,310,320,930,935,950} are really platform dependent and should be made into selectable hidden options. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-09 14:37:59 +08:00
help
ARM: pxa: support pxa95x The core of PXA955 is PJ4. Add new PJ4 support. And add new macro CONFIG_PXA95x. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-11-24 11:54:19 +08:00
PXA950 (codename MG1)
[ARM] pxa: make CPU_PXA* to be selectable hidden options CONFIG_CPU_PXA{300,310,320,930,935,950} are really platform dependent and should be made into selectable hidden options. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-09 14:37:59 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config PXA_SHARP_C7xx
bool
[ARM] 3228/1: SharpSL: Move PM code to arch/arm/common Patch from Richard Purdie This patch moves a large chunk of the sharpsl_pm driver to arch/arm/common so that it can be reused on other devices such as the SL-5500 (collie). It also abstracts some functions from the core into the machine and platform specific parts of the driver to aid reuse. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-06 04:44:55 +08:00
select SHARPSL_PM
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
Enable support for all Sharp C7xx models
[PATCH] SharpSL: Add new ARM PXA machines Spitz and Borzoi with partial Akita Support Add the platform support code for two new Sharp Zaurus Models, Spitz (SL-C3000) and Borzoi (SL-C3100). This patch also adds most of the foundations for Akita (SL-C1000) Support. The missing link for Akita is the driver for its I2C io expander. Once this has been finished, the missing Kconfig option and machine declaration can easily be added to this code. Signed-Off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 16:25:34 +08:00
config PXA_SHARP_Cxx00
bool
[ARM] 3228/1: SharpSL: Move PM code to arch/arm/common Patch from Richard Purdie This patch moves a large chunk of the sharpsl_pm driver to arch/arm/common so that it can be reused on other devices such as the SL-5500 (collie). It also abstracts some functions from the core into the machine and platform specific parts of the driver to aid reuse. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-06 04:44:55 +08:00
select SHARPSL_PM
[PATCH] SharpSL: Add new ARM PXA machines Spitz and Borzoi with partial Akita Support Add the platform support code for two new Sharp Zaurus Models, Spitz (SL-C3000) and Borzoi (SL-C3100). This patch also adds most of the foundations for Akita (SL-C1000) Support. The missing link for Akita is the driver for its I2C io expander. Once this has been finished, the missing Kconfig option and machine declaration can easily be added to this code. Signed-Off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 16:25:34 +08:00
help
Enable common support for Sharp Cxx00 models
[ARM] pxa: move hidden Kconfig options to right place and vice versa 1. TOSA related un-hidden options moved to right under MACH_TOSA 2. SHARPSL_PM related hidden options moved to the end of Kconfig Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-22 17:15:32 +08:00
config SHARPSL_PM
bool
select APM_EMULATION
select SHARPSL_PM_MAX1111
[ARM] pxa/tosa: move CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES to mach/Kconfig Tosa is now able to use generic matrix keypad driver instead of the deprecated tosakbd.c, where CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES is still useful. Move it to mach/Kconfig. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-04-27 14:43:03 +08:00
[ARM] pxa: move hidden Kconfig options to right place and vice versa 1. TOSA related un-hidden options moved to right under MACH_TOSA 2. SHARPSL_PM related hidden options moved to the end of Kconfig Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-22 17:15:32 +08:00
config SHARPSL_PM_MAX1111
bool
select HWMON
select SENSORS_MAX1111
[ARM] pxa/tosa: move CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES to mach/Kconfig Tosa is now able to use generic matrix keypad driver instead of the deprecated tosakbd.c, where CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES is still useful. Move it to mach/Kconfig. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-04-27 14:43:03 +08:00
[ARM] 5233/1: Allow PXA to have ISA IRQs numbered 0-15 Allow PXA IRQs to be numbered starting at 16, leaving 0 to 15 for the ISA IRQs, if needed. This patch depends on RMK's PXA_HAVE_BOARD_IRQS patch. Signed-off-by: Marc Zyngier <marc.zyngier@altran.com> Acked-by: Russel King <linux@arm.linux.org.uk> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-01 20:03:32 +08:00
config PXA_HAVE_ISA_IRQS
bool
ARM: pxa: add U2D controller and ULPI driver for pxa3xx USB2.0 Device Controller (U2DC) which is found in Marvell PXA3xx. U2DC supports both High and Full speed modes. PXA320 and PXA300 U2DC supports only UTMI interface. PXA310 U2DC supports only ULPI interface and has the OTG capability. U2D Controller ULPI driver introduced in this patch supports only the PXA310 USB Host via the ULPI. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-07-27 20:06:58 +08:00
config PXA310_ULPI
bool
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
endif
Copy Permalink