diff --git a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt new file mode 100644 index 000000000000..d9b7c2ff611e --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt @@ -0,0 +1,34 @@ +* Samsung S6SY761 touchscreen controller + +Required properties: +- compatible : must be "samsung,s6sy761" +- reg : I2C slave address, (e.g. 0x48) +- interrupt-parent : the phandle to the interrupt controller which provides + the interrupt +- interrupts : interrupt specification +- avdd-supply : analogic power supply +- vdd-supply : power supply + +Optional properties: +- touchscreen-size-x : see touchscreen.txt. This property is embedded in the + device. If defined it forces a different x resolution. +- touchscreen-size-y : see touchscreen.txt. This property is embedded in the + device. If defined it forces a different y resolution. + +Example: + +i2c@00000000 { + + /* ... */ + + touchscreen@48 { + compatible = "samsung,s6sy761"; + reg = <0x48>; + interrupt-parent = <&gpa1>; + interrupts = <1 IRQ_TYPE_NONE>; + avdd-supply = <&ldo30_reg>; + vdd-supply = <&ldo31_reg>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + }; +}; diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index dbe33fc3a286..0cfdb7cb610e 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -404,6 +404,17 @@ config TOUCHSCREEN_S3C2410 To compile this driver as a module, choose M here: the module will be called s3c2410_ts. +config TOUCHSCREEN_S6SY761 + tristate "Samsung S6SY761 Touchscreen driver" + depends on I2C + help + Say Y if you have the Samsung S6SY761 driver + + If unsure, say N + + To compile this driver as module, choose M here: the + module will be called s6sy761. + config TOUCHSCREEN_GUNZE tristate "Gunze AHL-51S touchscreen" select SERIO diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index d9a7024c8cd9..d2a2b3b7af27 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -67,6 +67,7 @@ obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixcir_i2c_ts.o obj-$(CONFIG_TOUCHSCREEN_RM_TS) += raydium_i2c_ts.o obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o +obj-$(CONFIG_TOUCHSCREEN_S6SY761) += s6sy761.o obj-$(CONFIG_TOUCHSCREEN_SILEAD) += silead.o obj-$(CONFIG_TOUCHSCREEN_SIS_I2C) += sis_i2c.o obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o diff --git a/drivers/input/touchscreen/s6sy761.c b/drivers/input/touchscreen/s6sy761.c new file mode 100644 index 000000000000..26b1cb8a88ec --- /dev/null +++ b/drivers/input/touchscreen/s6sy761.c @@ -0,0 +1,559 @@ +/* + * Copyright (c) 2017 Samsung Electronics Co., Ltd. + * Author: Andi Shyti + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Samsung S6SY761 Touchscreen device driver + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* commands */ +#define S6SY761_SENSE_ON 0x10 +#define S6SY761_SENSE_OFF 0x11 +#define S6SY761_TOUCH_FUNCTION 0x30 /* R/W for get/set */ +#define S6SY761_FIRMWARE_INTEGRITY 0x21 +#define S6SY761_PANEL_INFO 0x23 +#define S6SY761_DEVICE_ID 0x52 +#define S6SY761_BOOT_STATUS 0x55 +#define S6SY761_READ_ONE_EVENT 0x60 +#define S6SY761_READ_ALL_EVENT 0x61 +#define S6SY761_CLEAR_EVENT_STACK 0x62 +#define S6SY761_APPLICATION_MODE 0xe4 + +/* events */ +#define S6SY761_EVENT_INFO 0x02 +#define S6SY761_EVENT_VENDOR_INFO 0x07 + +/* info */ +#define S6SY761_INFO_BOOT_COMPLETE 0x00 + +/* firmware status */ +#define S6SY761_FW_OK 0x80 + +/* + * the functionalities are put as a reference + * as in the device I am using none of them + * works therefore not used in this driver yet. + */ +/* touchscreen functionalities */ +#define S6SY761_MASK_TOUCH BIT(0) +#define S6SY761_MASK_HOVER BIT(1) +#define S6SY761_MASK_COVER BIT(2) +#define S6SY761_MASK_GLOVE BIT(3) +#define S6SY761_MASK_STYLUS BIT(4) +#define S6SY761_MASK_PALM BIT(5) +#define S6SY761_MASK_WET BIT(6) +#define S6SY761_MASK_PROXIMITY BIT(7) + +/* boot status (BS) */ +#define S6SY761_BS_BOOT_LOADER 0x10 +#define S6SY761_BS_APPLICATION 0x20 + +/* event id */ +#define S6SY761_EVENT_ID_COORDINATE 0x00 +#define S6SY761_EVENT_ID_STATUS 0x01 + +/* event register masks */ +#define S6SY761_MASK_TOUCH_STATE 0xc0 /* byte 0 */ +#define S6SY761_MASK_TID 0x3c +#define S6SY761_MASK_EID 0x03 +#define S6SY761_MASK_X 0xf0 /* byte 3 */ +#define S6SY761_MASK_Y 0x0f +#define S6SY761_MASK_Z 0x3f /* byte 6 */ +#define S6SY761_MASK_LEFT_EVENTS 0x3f /* byte 7 */ +#define S6SY761_MASK_TOUCH_TYPE 0xc0 /* MSB in byte 6, LSB in byte 7 */ + +/* event touch state values */ +#define S6SY761_TS_NONE 0x00 +#define S6SY761_TS_PRESS 0x01 +#define S6SY761_TS_MOVE 0x02 +#define S6SY761_TS_RELEASE 0x03 + +/* application modes */ +#define S6SY761_APP_NORMAL 0x0 +#define S6SY761_APP_LOW_POWER 0x1 +#define S6SY761_APP_TEST 0x2 +#define S6SY761_APP_FLASH 0x3 +#define S6SY761_APP_SLEEP 0x4 + +#define S6SY761_EVENT_SIZE 8 +#define S6SY761_EVENT_COUNT 32 +#define S6SY761_DEVID_SIZE 3 +#define S6SY761_PANEL_ID_SIZE 11 +#define S6SY761_TS_STATUS_SIZE 5 +#define S6SY761_MAX_FINGERS 10 + +#define S6SY761_DEV_NAME "s6sy761" + +enum s6sy761_regulators { + S6SY761_REGULATOR_VDD, + S6SY761_REGULATOR_AVDD, +}; + +struct s6sy761_data { + struct i2c_client *client; + struct regulator_bulk_data regulators[2]; + struct input_dev *input; + struct touchscreen_properties prop; + + u8 data[S6SY761_EVENT_SIZE * S6SY761_EVENT_COUNT]; + + u16 devid; + u8 tx_channel; +}; + +/* + * We can't simply use i2c_smbus_read_i2c_block_data because we + * need to read more than 255 bytes + */ +static int s6sy761_read_events(struct s6sy761_data *sdata, u16 n_events) +{ + u8 cmd = S6SY761_READ_ALL_EVENT; + struct i2c_msg msgs[2] = { + { + .addr = sdata->client->addr, + .len = 1, + .buf = &cmd, + }, + { + .addr = sdata->client->addr, + .flags = I2C_M_RD, + .len = (n_events * S6SY761_EVENT_SIZE), + .buf = sdata->data + S6SY761_EVENT_SIZE, + }, + }; + int ret; + + ret = i2c_transfer(sdata->client->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) + return ret; + + return ret == ARRAY_SIZE(msgs) ? 0 : -EIO; +} + +static void s6sy761_report_coordinates(struct s6sy761_data *sdata, + u8 *event, u8 tid) +{ + u8 major = event[4]; + u8 minor = event[5]; + u8 z = event[6] & S6SY761_MASK_Z; + u16 x = (event[1] << 3) | ((event[3] & S6SY761_MASK_X) >> 4); + u16 y = (event[2] << 3) | (event[3] & S6SY761_MASK_Y); + + input_mt_slot(sdata->input, tid); + + input_mt_report_slot_state(sdata->input, MT_TOOL_FINGER, true); + input_report_abs(sdata->input, ABS_MT_POSITION_X, x); + input_report_abs(sdata->input, ABS_MT_POSITION_Y, y); + input_report_abs(sdata->input, ABS_MT_TOUCH_MAJOR, major); + input_report_abs(sdata->input, ABS_MT_TOUCH_MINOR, minor); + input_report_abs(sdata->input, ABS_MT_PRESSURE, z); + + input_sync(sdata->input); +} + +static void s6sy761_report_release(struct s6sy761_data *sdata, + u8 *event, u8 tid) +{ + input_mt_slot(sdata->input, tid); + input_mt_report_slot_state(sdata->input, MT_TOOL_FINGER, false); + + input_sync(sdata->input); +} + +static void s6sy761_handle_coordinates(struct s6sy761_data *sdata, u8 *event) +{ + u8 tid; + u8 touch_state; + + if (unlikely(!(event[0] & S6SY761_MASK_TID))) + return; + + tid = ((event[0] & S6SY761_MASK_TID) >> 2) - 1; + touch_state = (event[0] & S6SY761_MASK_TOUCH_STATE) >> 6; + + switch (touch_state) { + + case S6SY761_TS_NONE: + break; + case S6SY761_TS_RELEASE: + s6sy761_report_release(sdata, event, tid); + break; + case S6SY761_TS_PRESS: + case S6SY761_TS_MOVE: + s6sy761_report_coordinates(sdata, event, tid); + break; + } +} + +static void s6sy761_handle_events(struct s6sy761_data *sdata, u8 n_events) +{ + int i; + + for (i = 0; i < n_events; i++) { + u8 *event = &sdata->data[i * S6SY761_EVENT_SIZE]; + u8 event_id = event[0] & S6SY761_MASK_EID; + + if (!event[0]) + return; + + switch (event_id) { + + case S6SY761_EVENT_ID_COORDINATE: + s6sy761_handle_coordinates(sdata, event); + break; + + case S6SY761_EVENT_ID_STATUS: + break; + + default: + break; + } + } +} + +static irqreturn_t s6sy761_irq_handler(int irq, void *dev) +{ + struct s6sy761_data *sdata = dev; + int ret; + u8 n_events; + + ret = i2c_smbus_read_i2c_block_data(sdata->client, + S6SY761_READ_ONE_EVENT, + S6SY761_EVENT_SIZE, + sdata->data); + if (ret < 0) { + dev_err(&sdata->client->dev, "failed to read events\n"); + return IRQ_HANDLED; + } + + if (!sdata->data[0]) + return IRQ_HANDLED; + + n_events = sdata->data[7] & S6SY761_MASK_LEFT_EVENTS; + if (unlikely(n_events > S6SY761_EVENT_COUNT - 1)) + return IRQ_HANDLED; + + if (n_events) { + ret = s6sy761_read_events(sdata, n_events); + if (ret < 0) { + dev_err(&sdata->client->dev, "failed to read events\n"); + return IRQ_HANDLED; + } + } + + s6sy761_handle_events(sdata, n_events + 1); + + return IRQ_HANDLED; +} + +static int s6sy761_input_open(struct input_dev *dev) +{ + struct s6sy761_data *sdata = input_get_drvdata(dev); + + return i2c_smbus_write_byte(sdata->client, S6SY761_SENSE_ON); +} + +static void s6sy761_input_close(struct input_dev *dev) +{ + struct s6sy761_data *sdata = input_get_drvdata(dev); + int ret; + + ret = i2c_smbus_write_byte(sdata->client, S6SY761_SENSE_OFF); + if (ret) + dev_err(&sdata->client->dev, "failed to turn off sensing\n"); +} + +static ssize_t s6sy761_sysfs_devid(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct s6sy761_data *sdata = dev_get_drvdata(dev); + + return sprintf(buf, "%#x\n", sdata->devid); +} + +static DEVICE_ATTR(devid, 0444, s6sy761_sysfs_devid, NULL); + +static struct attribute *s6sy761_sysfs_attrs[] = { + &dev_attr_devid.attr, + NULL +}; + +static struct attribute_group s6sy761_attribute_group = { + .attrs = s6sy761_sysfs_attrs +}; + +static int s6sy761_power_on(struct s6sy761_data *sdata) +{ + u8 buffer[S6SY761_EVENT_SIZE]; + u8 event; + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(sdata->regulators), + sdata->regulators); + if (ret) + return ret; + + msleep(140); + + /* double check whether the touch is functional */ + ret = i2c_smbus_read_i2c_block_data(sdata->client, + S6SY761_READ_ONE_EVENT, + S6SY761_EVENT_SIZE, + buffer); + if (ret < 0) + return ret; + + event = (buffer[0] >> 2) & 0xf; + + if ((event != S6SY761_EVENT_INFO && + event != S6SY761_EVENT_VENDOR_INFO) || + buffer[1] != S6SY761_INFO_BOOT_COMPLETE) { + return -ENODEV; + } + + ret = i2c_smbus_read_byte_data(sdata->client, S6SY761_BOOT_STATUS); + if (ret < 0) + return ret; + + /* for some reasons the device might be stuck in the bootloader */ + if (ret != S6SY761_BS_APPLICATION) + return -ENODEV; + + /* enable touch functionality */ + ret = i2c_smbus_write_word_data(sdata->client, + S6SY761_TOUCH_FUNCTION, + S6SY761_MASK_TOUCH); + if (ret) + return ret; + + return 0; +} + +static int s6sy761_hw_init(struct s6sy761_data *sdata, + unsigned int *max_x, unsigned int *max_y) +{ + u8 buffer[S6SY761_PANEL_ID_SIZE]; /* larger read size */ + int ret; + + ret = s6sy761_power_on(sdata); + if (ret) + return ret; + + ret = i2c_smbus_read_i2c_block_data(sdata->client, + S6SY761_DEVICE_ID, + S6SY761_DEVID_SIZE, + buffer); + if (ret < 0) + return ret; + + sdata->devid = get_unaligned_be16(buffer + 1); + + ret = i2c_smbus_read_i2c_block_data(sdata->client, + S6SY761_PANEL_INFO, + S6SY761_PANEL_ID_SIZE, + buffer); + if (ret < 0) + return ret; + + *max_x = get_unaligned_be16(buffer); + *max_y = get_unaligned_be16(buffer + 2); + + /* if no tx channels defined, at least keep one */ + sdata->tx_channel = max_t(u8, buffer[8], 1); + + ret = i2c_smbus_read_byte_data(sdata->client, + S6SY761_FIRMWARE_INTEGRITY); + if (ret < 0) + return ret; + else if (ret != S6SY761_FW_OK) + return -ENODEV; + + return 0; +} + +static void s6sy761_power_off(void *data) +{ + struct s6sy761_data *sdata = data; + + disable_irq(sdata->client->irq); + regulator_bulk_disable(ARRAY_SIZE(sdata->regulators), + sdata->regulators); +} + +static int s6sy761_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct s6sy761_data *sdata; + unsigned int max_x, max_y; + int err; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_I2C_BLOCK)) + return -ENODEV; + + sdata = devm_kzalloc(&client->dev, sizeof(*sdata), GFP_KERNEL); + if (!sdata) + return -ENOMEM; + + i2c_set_clientdata(client, sdata); + sdata->client = client; + + sdata->regulators[S6SY761_REGULATOR_VDD].supply = "vdd"; + sdata->regulators[S6SY761_REGULATOR_AVDD].supply = "avdd"; + err = devm_regulator_bulk_get(&client->dev, + ARRAY_SIZE(sdata->regulators), + sdata->regulators); + if (err) + return err; + + err = devm_add_action_or_reset(&client->dev, s6sy761_power_off, sdata); + if (err) + return err; + + err = s6sy761_hw_init(sdata, &max_x, &max_y); + if (err) + return err; + + sdata->input = devm_input_allocate_device(&client->dev); + if (!sdata->input) + return -ENOMEM; + + sdata->input->name = S6SY761_DEV_NAME; + sdata->input->id.bustype = BUS_I2C; + sdata->input->open = s6sy761_input_open; + sdata->input->close = s6sy761_input_close; + + input_set_abs_params(sdata->input, ABS_MT_POSITION_X, 0, max_x, 0, 0); + input_set_abs_params(sdata->input, ABS_MT_POSITION_Y, 0, max_y, 0, 0); + input_set_abs_params(sdata->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); + input_set_abs_params(sdata->input, ABS_MT_TOUCH_MINOR, 0, 255, 0, 0); + input_set_abs_params(sdata->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); + input_set_abs_params(sdata->input, ABS_MT_TOUCH_MINOR, 0, 255, 0, 0); + input_set_abs_params(sdata->input, ABS_MT_PRESSURE, 0, 255, 0, 0); + + touchscreen_parse_properties(sdata->input, true, &sdata->prop); + + if (!input_abs_get_max(sdata->input, ABS_X) || + !input_abs_get_max(sdata->input, ABS_Y)) { + dev_warn(&client->dev, "the axis have not been set\n"); + } + + err = input_mt_init_slots(sdata->input, sdata->tx_channel, + INPUT_MT_DIRECT); + if (err) + return err; + + input_set_drvdata(sdata->input, sdata); + + err = input_register_device(sdata->input); + if (err) + return err; + + err = devm_request_threaded_irq(&client->dev, client->irq, NULL, + s6sy761_irq_handler, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "s6sy761_irq", sdata); + if (err) + return err; + + err = devm_device_add_group(&client->dev, &s6sy761_attribute_group); + if (err) + return err; + + pm_runtime_enable(&client->dev); + + return 0; +} + +static int s6sy761_remove(struct i2c_client *client) +{ + pm_runtime_disable(&client->dev); + + return 0; +} + +static int __maybe_unused s6sy761_runtime_suspend(struct device *dev) +{ + struct s6sy761_data *sdata = dev_get_drvdata(dev); + + return i2c_smbus_write_byte_data(sdata->client, + S6SY761_APPLICATION_MODE, S6SY761_APP_SLEEP); +} + +static int __maybe_unused s6sy761_runtime_resume(struct device *dev) +{ + struct s6sy761_data *sdata = dev_get_drvdata(dev); + + return i2c_smbus_write_byte_data(sdata->client, + S6SY761_APPLICATION_MODE, S6SY761_APP_NORMAL); +} + +static int __maybe_unused s6sy761_suspend(struct device *dev) +{ + struct s6sy761_data *sdata = dev_get_drvdata(dev); + + s6sy761_power_off(sdata); + + return 0; +} + +static int __maybe_unused s6sy761_resume(struct device *dev) +{ + struct s6sy761_data *sdata = dev_get_drvdata(dev); + + enable_irq(sdata->client->irq); + + return s6sy761_power_on(sdata); +} + +static const struct dev_pm_ops s6sy761_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(s6sy761_suspend, s6sy761_resume) + SET_RUNTIME_PM_OPS(s6sy761_runtime_suspend, + s6sy761_runtime_resume, NULL) +}; + +#ifdef CONFIG_OF +static const struct of_device_id s6sy761_of_match[] = { + { .compatible = "samsung,s6sy761", }, + { }, +}; +MODULE_DEVICE_TABLE(of, s6sy761_of_match); +#endif + +static const struct i2c_device_id s6sy761_id[] = { + { "s6sy761", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, s6sy761_id); + +static struct i2c_driver s6sy761_driver = { + .driver = { + .name = S6SY761_DEV_NAME, + .of_match_table = of_match_ptr(s6sy761_of_match), + .pm = &s6sy761_pm_ops, + }, + .probe = s6sy761_probe, + .remove = s6sy761_remove, + .id_table = s6sy761_id, +}; + +module_i2c_driver(s6sy761_driver); + +MODULE_AUTHOR("Andi Shyti "); +MODULE_DESCRIPTION("Samsung S6SY761 Touch Screen"); +MODULE_LICENSE("GPL v2");