forked from luck/tmp_suning_uos_patched
netdev: bfin_mac: fix performance issue found by netperf
- Remove dead long delay - Use proper defines - Remove broken implementation of the TX DMA Data Alignment TXDWA feature Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
805a8ab3ce
commit
015dac8886
@ -194,13 +194,13 @@ static int desc_list_init(void)
|
||||
struct dma_descriptor *b = &(r->desc_b);
|
||||
|
||||
/* allocate a new skb for next time receive */
|
||||
new_skb = dev_alloc_skb(PKT_BUF_SZ + 2);
|
||||
new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
|
||||
if (!new_skb) {
|
||||
printk(KERN_NOTICE DRV_NAME
|
||||
": init: low on mem - packet dropped\n");
|
||||
goto init_error;
|
||||
}
|
||||
skb_reserve(new_skb, 2);
|
||||
skb_reserve(new_skb, NET_IP_ALIGN);
|
||||
r->skb = new_skb;
|
||||
|
||||
/*
|
||||
@ -566,9 +566,9 @@ static void adjust_tx_list(void)
|
||||
*/
|
||||
if (current_tx_ptr->next->next == tx_list_head) {
|
||||
while (tx_list_head->status.status_word == 0) {
|
||||
mdelay(1);
|
||||
udelay(10);
|
||||
if (tx_list_head->status.status_word != 0
|
||||
|| !(bfin_read_DMA2_IRQ_STATUS() & 0x08)) {
|
||||
|| !(bfin_read_DMA2_IRQ_STATUS() & DMA_RUN)) {
|
||||
goto adjust_head;
|
||||
}
|
||||
if (timeout_cnt-- < 0) {
|
||||
@ -606,86 +606,28 @@ static int bfin_mac_hard_start_xmit(struct sk_buff *skb,
|
||||
struct net_device *dev)
|
||||
{
|
||||
u16 *data;
|
||||
|
||||
u32 data_align = (unsigned long)(skb->data) & 0x3;
|
||||
current_tx_ptr->skb = skb;
|
||||
|
||||
if (ANOMALY_05000285) {
|
||||
/*
|
||||
* TXDWA feature is not avaible to older revision < 0.3 silicon
|
||||
* of BF537
|
||||
*
|
||||
* Only if data buffer is ODD WORD alignment, we do not
|
||||
* need to memcpy
|
||||
*/
|
||||
u32 data_align = (u32)(skb->data) & 0x3;
|
||||
if (data_align == 0x2) {
|
||||
/* move skb->data to current_tx_ptr payload */
|
||||
data = (u16 *)(skb->data) - 1;
|
||||
*data = (u16)(skb->len);
|
||||
current_tx_ptr->desc_a.start_addr = (u32)data;
|
||||
/* this is important! */
|
||||
blackfin_dcache_flush_range((u32)data,
|
||||
(u32)((u8 *)data + skb->len + 4));
|
||||
} else {
|
||||
*((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
|
||||
memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
|
||||
skb->len);
|
||||
current_tx_ptr->desc_a.start_addr =
|
||||
(u32)current_tx_ptr->packet;
|
||||
if (current_tx_ptr->status.status_word != 0)
|
||||
current_tx_ptr->status.status_word = 0;
|
||||
blackfin_dcache_flush_range(
|
||||
(u32)current_tx_ptr->packet,
|
||||
(u32)(current_tx_ptr->packet + skb->len + 2));
|
||||
}
|
||||
if (data_align == 0x2) {
|
||||
/* move skb->data to current_tx_ptr payload */
|
||||
data = (u16 *)(skb->data) - 1;
|
||||
*data = (u16)(skb->len);
|
||||
current_tx_ptr->desc_a.start_addr = (u32)data;
|
||||
/* this is important! */
|
||||
blackfin_dcache_flush_range((u32)data,
|
||||
(u32)((u8 *)data + skb->len + 4));
|
||||
} else {
|
||||
/*
|
||||
* TXDWA feature is avaible to revision < 0.3 silicon of
|
||||
* BF537 and always avaible to BF52x
|
||||
*/
|
||||
u32 data_align = (u32)(skb->data) & 0x3;
|
||||
if (data_align == 0x0) {
|
||||
u16 sysctl = bfin_read_EMAC_SYSCTL();
|
||||
sysctl |= TXDWA;
|
||||
bfin_write_EMAC_SYSCTL(sysctl);
|
||||
|
||||
/* move skb->data to current_tx_ptr payload */
|
||||
data = (u16 *)(skb->data) - 2;
|
||||
*data = (u16)(skb->len);
|
||||
current_tx_ptr->desc_a.start_addr = (u32)data;
|
||||
/* this is important! */
|
||||
blackfin_dcache_flush_range(
|
||||
(u32)data,
|
||||
(u32)((u8 *)data + skb->len + 4));
|
||||
} else if (data_align == 0x2) {
|
||||
u16 sysctl = bfin_read_EMAC_SYSCTL();
|
||||
sysctl &= ~TXDWA;
|
||||
bfin_write_EMAC_SYSCTL(sysctl);
|
||||
|
||||
/* move skb->data to current_tx_ptr payload */
|
||||
data = (u16 *)(skb->data) - 1;
|
||||
*data = (u16)(skb->len);
|
||||
current_tx_ptr->desc_a.start_addr = (u32)data;
|
||||
/* this is important! */
|
||||
blackfin_dcache_flush_range(
|
||||
(u32)data,
|
||||
(u32)((u8 *)data + skb->len + 4));
|
||||
} else {
|
||||
u16 sysctl = bfin_read_EMAC_SYSCTL();
|
||||
sysctl &= ~TXDWA;
|
||||
bfin_write_EMAC_SYSCTL(sysctl);
|
||||
|
||||
*((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
|
||||
memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
|
||||
skb->len);
|
||||
current_tx_ptr->desc_a.start_addr =
|
||||
(u32)current_tx_ptr->packet;
|
||||
if (current_tx_ptr->status.status_word != 0)
|
||||
current_tx_ptr->status.status_word = 0;
|
||||
blackfin_dcache_flush_range(
|
||||
(u32)current_tx_ptr->packet,
|
||||
(u32)(current_tx_ptr->packet + skb->len + 2));
|
||||
}
|
||||
*((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
|
||||
memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
|
||||
skb->len);
|
||||
current_tx_ptr->desc_a.start_addr =
|
||||
(u32)current_tx_ptr->packet;
|
||||
if (current_tx_ptr->status.status_word != 0)
|
||||
current_tx_ptr->status.status_word = 0;
|
||||
blackfin_dcache_flush_range(
|
||||
(u32)current_tx_ptr->packet,
|
||||
(u32)(current_tx_ptr->packet + skb->len + 2));
|
||||
}
|
||||
|
||||
/* make sure the internal data buffers in the core are drained
|
||||
@ -698,7 +640,7 @@ static int bfin_mac_hard_start_xmit(struct sk_buff *skb,
|
||||
current_tx_ptr->desc_a.config |= DMAEN;
|
||||
|
||||
/* tx dma is running, just return */
|
||||
if (bfin_read_DMA2_IRQ_STATUS() & 0x08)
|
||||
if (bfin_read_DMA2_IRQ_STATUS() & DMA_RUN)
|
||||
goto out;
|
||||
|
||||
/* tx dma is not running */
|
||||
@ -724,7 +666,7 @@ static void bfin_mac_rx(struct net_device *dev)
|
||||
|
||||
/* allocate a new skb for next time receive */
|
||||
skb = current_rx_ptr->skb;
|
||||
new_skb = dev_alloc_skb(PKT_BUF_SZ + 2);
|
||||
new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
|
||||
if (!new_skb) {
|
||||
printk(KERN_NOTICE DRV_NAME
|
||||
": rx: low on mem - packet dropped\n");
|
||||
@ -732,7 +674,7 @@ static void bfin_mac_rx(struct net_device *dev)
|
||||
goto out;
|
||||
}
|
||||
/* reserve 2 bytes for RXDWA padding */
|
||||
skb_reserve(new_skb, 2);
|
||||
skb_reserve(new_skb, NET_IP_ALIGN);
|
||||
current_rx_ptr->skb = new_skb;
|
||||
current_rx_ptr->desc_a.start_addr = (unsigned long)new_skb->data - 2;
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user