AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

spi/bfin_spi: push all size checks into the transfer function

Browse Source 
This reduces duplication between the setup/transfer functions and keeps
values cached during setup from overriding values changed on a transfer
basis (like bits_per_word).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This commit is contained in:
Mike Frysinger 2009-12-18 17:38:04 +00:00
parent 7370ed6b91
commit 033f44bd0e
1 changed files with 14 additions and 43 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

57
drivers/spi/spi_bfin5xx.c
View File

@ -114,10 +114,7 @@ struct slave_data {
u16 flag;
u8 chip_select_num;
u8 n_bytes;
u8 width; /* 0 or 1 */
u8 enable_dma;
u8 bits_per_word; /* 8 or 16 */
u16 cs_chg_udelay; /* Some devices require > 255usec delay */
u32 cs_gpio;
u16 idle_tx_val;
@ -562,6 +559,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
struct spi_transfer *transfer = NULL;
struct spi_transfer *previous = NULL;
struct slave_data *chip = NULL;
unsigned int bits_per_word;
u8 width;
u16 cr, dma_width, dma_config;
u32 tranf_success = 1;
@ -641,26 +639,15 @@ static void bfin_spi_pump_transfers(unsigned long data)
drv_data->cs_change = transfer->cs_change;
/* Bits per word setup */
switch (transfer->bits_per_word) {
case 8:
bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word;
if (bits_per_word == 8) {
drv_data->n_bytes = 1;
width = CFG_SPI_WORDSIZE8;
drv_data->ops = &bfin_transfer_ops_u8;
break;
case 16:
} else {
drv_data->n_bytes = 2;
width = CFG_SPI_WORDSIZE16;
drv_data->ops = &bfin_transfer_ops_u16;
break;
default:
/* No change, the same as default setting */
transfer->bits_per_word = chip->bits_per_word;
drv_data->n_bytes = chip->n_bytes;
width = chip->width;
drv_data->ops = chip->ops;
break;
}
cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD));
cr |= (width << 8);
@ -811,9 +798,9 @@ static void bfin_spi_pump_transfers(unsigned long data)
if (drv_data->tx == NULL)
write_TDBR(drv_data, chip->idle_tx_val);
else {
if (transfer->bits_per_word == 8)
if (bits_per_word == 8)
write_TDBR(drv_data, (*(u8 *) (drv_data->tx)));
else if (transfer->bits_per_word == 16)
else
write_TDBR(drv_data, (*(u16 *) (drv_data->tx)));
drv_data->tx += drv_data->n_bytes;
}
@ -987,9 +974,6 @@ static int bfin_spi_setup(struct spi_device *spi)
struct master_data *drv_data = spi_master_get_devdata(spi->master);
int ret = -EINVAL;
if (spi->bits_per_word != 8 && spi->bits_per_word != 16)
goto error;
/* Only alloc (or use chip_info) on first setup */
chip_info = NULL;
chip = spi_get_ctldata(spi);
@ -1023,10 +1007,16 @@ static int bfin_spi_setup(struct spi_device *spi)
chip->enable_dma = chip_info->enable_dma != 0
&& drv_data->master_info->enable_dma;
chip->ctl_reg = chip_info->ctl_reg;
chip->bits_per_word = chip_info->bits_per_word;
chip->cs_chg_udelay = chip_info->cs_chg_udelay;
chip->idle_tx_val = chip_info->idle_tx_val;
chip->pio_interrupt = chip_info->pio_interrupt;
spi->bits_per_word = chip_info->bits_per_word;
}
if (spi->bits_per_word != 8 && spi->bits_per_word != 16) {
dev_err(&spi->dev, "%d bits_per_word is not supported\n",
spi->bits_per_word);
goto error;
}
/* translate common spi framework into our register */
@ -1050,25 +1040,6 @@ static int bfin_spi_setup(struct spi_device *spi)
else
chip->cs_gpio = chip->chip_select_num - MAX_CTRL_CS;
switch (chip->bits_per_word) {
case 8:
chip->n_bytes = 1;
chip->width = CFG_SPI_WORDSIZE8;
chip->ops = &bfin_transfer_ops_u8;
break;
case 16:
chip->n_bytes = 2;
chip->width = CFG_SPI_WORDSIZE16;
chip->ops = &bfin_transfer_ops_u16;
break;
default:
dev_err(&spi->dev, "%d bits_per_word is not supported\n",
chip->bits_per_word);
goto error;
}
if (chip->enable_dma && chip->pio_interrupt) {
dev_err(&spi->dev, "enable_dma is set, "
"do not set pio_interrupt\n");
@ -1119,7 +1090,7 @@ static int bfin_spi_setup(struct spi_device *spi)
}
dev_dbg(&spi->dev, "setup spi chip %s, width is %d, dma is %d\n",
spi->modalias, chip->width, chip->enable_dma);
spi->modalias, spi->bits_per_word, chip->enable_dma);
dev_dbg(&spi->dev, "ctl_reg is 0x%x, flag_reg is 0x%x\n",
chip->ctl_reg, chip->flag);