AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

ARM: tegra: acer-a500: Remove bogus USB VBUS regulators

Browse Source 
[ Upstream commit 70e740ad55e5f93a19493720f4105555fade4a73 ]

The configuration of USB VBUS regulators was borrowed from downstream
kernel, which is incorrect because the corresponding GPIOs are connected
to PROX_EN (A501 3G model) and LED_EN pins in accordance to the board
schematics. USB works fine with both GPIOs being disabled, so remove the
bogus USB VBUS regulators. The USB VBUS of USB3 is supplied from the fixed
5v system regulator and device-mode USB1 doesn't have VBUS switches.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
Dmitry Osipenko 2021-08-03 00:19:43 +03:00 committed by Greg Kroah-Hartman
parent 9713dfa518
commit 035e8d5a6d
1 changed files with 1 additions and 24 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

25
arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
View File

@ -704,7 +704,6 @@ usb-phy@c5000000 {
nvidia,xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <2>;
nvidia,xcvr-lsrslew = <2>;
vbus-supply = <&vdd_vbus1>;
};
usb@c5008000 {
@ -716,7 +715,7 @@ usb-phy@c5008000 {
nvidia,xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <2>;
nvidia,xcvr-lsrslew = <2>;
vbus-supply = <&vdd_vbus3>;
vbus-supply = <&vdd_5v0_sys>;
};
brcm_wifi_pwrseq: wifi-pwrseq {
@ -967,28 +966,6 @@ vdd_pnl: regulator@3 {
vin-supply = <&vdd_5v0_sys>;
};
vdd_vbus1: regulator@4 {
compatible = "regulator-fixed";
regulator-name = "vdd_usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
vdd_vbus3: regulator@5 {
compatible = "regulator-fixed";
regulator-name = "vdd_usb3_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
gpio = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
sound {
compatible = "nvidia,tegra-audio-wm8903-picasso",
"nvidia,tegra-audio-wm8903";