AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

pwm: lpc32xx: Properly set PWM_ENABLE bit in lpc32xx_pwm_[enable|disable]

Browse Source 
According to the LPC32x0 User Manual [1]:

For both PWM1 and PWM2 Control Registers:
BIT 31:
This bit gates the PWM_CLK signal and enables the external output pin
to the PWM_PIN_STATE logical level.

0 = PWM disabled. (Default)
1 = PWM enabled

So in lpc32xx_pwm_enable(), we should set PWM_ENABLE bit.
In lpc32xx_pwm_disable(), we should just clear PWM_ENABLE bit rather than
write 0 to the register which will also clear PWMx_RELOADV and PWMx_DUTY bits.

[1] http://www.nxp.com/documents/user_manual/UM10326.pdf

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
This commit is contained in:
Axel Lin 2013-04-23 14:01:31 +08:00 committed by Thierry Reding
parent f1a8870aeb
commit 08ee77b5a5
1 changed files with 16 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
drivers/pwm/pwm-lpc32xx.c
View File

@ -77,15 +77,29 @@ static int lpc32xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
static int lpc32xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct lpc32xx_pwm_chip *lpc32xx = to_lpc32xx_pwm_chip(chip);
u32 val;
int ret;
return clk_enable(lpc32xx->clk);
ret = clk_enable(lpc32xx->clk);
if (ret)
return ret;
val = readl(lpc32xx->base + (pwm->hwpwm << 2));
val |= PWM_ENABLE;
writel(val, lpc32xx->base + (pwm->hwpwm << 2));
return 0;
}
static void lpc32xx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct lpc32xx_pwm_chip *lpc32xx = to_lpc32xx_pwm_chip(chip);
u32 val;
val = readl(lpc32xx->base + (pwm->hwpwm << 2));
val &= ~PWM_ENABLE;
writel(val, lpc32xx->base + (pwm->hwpwm << 2));
writel(0, lpc32xx->base + (pwm->hwpwm << 2));
clk_disable(lpc32xx->clk);
}