AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

mfd: asic3: enable SD/SDIO cell

Browse Source 
This enables the ASIC3's SD/SDIO MFD cell, supported by the tmio_mmc driver.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Philipp Zabel 2009-06-15 12:10:25 +02:00 committed by Samuel Ortiz
parent 9461f65a85
commit 09f05ce851
1 changed files with 113 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

114
drivers/mfd/asic3.c
View File

@ -27,6 +27,7 @@
#include <linux/mfd/asic3.h>
#include <linux/mfd/core.h>
#include <linux/mfd/ds1wm.h>
#include <linux/mfd/tmio.h>
enum {
ASIC3_CLOCK_SPI,
@ -684,11 +685,106 @@ static struct mfd_cell asic3_cell_ds1wm = {
.resources = ds1wm_resources,
};
static struct tmio_mmc_data asic3_mmc_data = {
.hclk = 24576000,
};
static struct resource asic3_mmc_resources[] = {
{
.start = ASIC3_SD_CTRL_BASE,
.end = ASIC3_SD_CTRL_BASE + 0x3ff,
.flags = IORESOURCE_MEM,
},
{
.start = ASIC3_SD_CONFIG_BASE,
.end = ASIC3_SD_CONFIG_BASE + 0x1ff,
.flags = IORESOURCE_MEM,
},
{
.start = 0,
.end = 0,
.flags = IORESOURCE_IRQ,
},
};
static int asic3_mmc_enable(struct platform_device *pdev)
{
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
/* Not sure if it must be done bit by bit, but leaving as-is */
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
ASIC3_SDHWCTRL_LEVCD, 1);
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
ASIC3_SDHWCTRL_LEVWP, 1);
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
ASIC3_SDHWCTRL_SUSPEND, 0);
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
ASIC3_SDHWCTRL_PCLR, 0);
asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
/* CLK32 used for card detection and for interruption detection
* when HCLK is stopped.
*/
asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
msleep(1);
/* HCLK 24.576 MHz, BCLK 12.288 MHz: */
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL),
CLOCK_SEL_CX | CLOCK_SEL_SD_HCLK_SEL);
asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_SD_HOST]);
asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_SD_BUS]);
msleep(1);
asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
ASIC3_EXTCF_SD_MEM_ENABLE, 1);
/* Enable SD card slot 3.3V power supply */
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
ASIC3_SDHWCTRL_SDPWR, 1);
return 0;
}
static int asic3_mmc_disable(struct platform_device *pdev)
{
struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
/* Put in suspend mode */
asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
ASIC3_SDHWCTRL_SUSPEND, 1);
/* Disable clocks */
asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_SD_HOST]);
asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_SD_BUS]);
asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
return 0;
}
static struct mfd_cell asic3_cell_mmc = {
.name = "tmio-mmc",
.enable = asic3_mmc_enable,
.disable = asic3_mmc_disable,
.driver_data = &asic3_mmc_data,
.num_resources = ARRAY_SIZE(asic3_mmc_resources),
.resources = asic3_mmc_resources,
};
static int __init asic3_mfd_probe(struct platform_device *pdev,
struct resource *mem)
{
struct asic3 *asic = platform_get_drvdata(pdev);
int ret;
struct resource *mem_sdio;
int irq, ret;
mem_sdio = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!mem_sdio)
dev_dbg(asic->dev, "no SDIO MEM resource\n");
irq = platform_get_irq(pdev, 1);
if (irq < 0)
dev_dbg(asic->dev, "no SDIO IRQ resource\n");
/* DS1WM */
asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
@ -700,9 +796,25 @@ static int __init asic3_mfd_probe(struct platform_device *pdev,
asic3_cell_ds1wm.platform_data = &asic3_cell_ds1wm;
asic3_cell_ds1wm.data_size = sizeof(asic3_cell_ds1wm);
/* MMC */
asic3_mmc_resources[0].start >>= asic->bus_shift;
asic3_mmc_resources[0].end >>= asic->bus_shift;
asic3_mmc_resources[1].start >>= asic->bus_shift;
asic3_mmc_resources[1].end >>= asic->bus_shift;
asic3_cell_mmc.platform_data = &asic3_cell_mmc;
asic3_cell_mmc.data_size = sizeof(asic3_cell_mmc);
ret = mfd_add_devices(&pdev->dev, pdev->id,
&asic3_cell_ds1wm, 1, mem, asic->irq_base);
if (ret < 0)
goto out;
if (mem_sdio && (irq >= 0))
ret = mfd_add_devices(&pdev->dev, pdev->id,
&asic3_cell_mmc, 1, mem_sdio, irq);
out:
return ret;
}