sh: SDHI platform data to the SE7724 board

Add SD Card support to the se7724 board using the
sh_mobile_sdhi driver hooked up to SDHI0 and CN7.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
Magnus Damm 2009-10-02 02:23:07 +00:00 committed by Paul Mundt
parent 17f81473d1
commit 0f79af6009

View File

@ -448,6 +448,28 @@ static struct platform_device sh7724_usb1_gadget_device = {
.resource = sh7724_usb1_gadget_resources,
};
static struct resource sdhi0_cn7_resources[] = {
[0] = {
.name = "SDHI0",
.start = 0x04ce0000,
.end = 0x04ce01ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 101,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device sdhi0_cn7_device = {
.name = "sh_mobile_sdhi",
.num_resources = ARRAY_SIZE(sdhi0_cn7_resources),
.resource = sdhi0_cn7_resources,
.archdata = {
.hwblk_id = HWBLK_SDHI0,
},
};
static struct platform_device *ms7724se_devices[] __initdata = {
&heartbeat_device,
&smc91x_eth_device,
@ -460,6 +482,7 @@ static struct platform_device *ms7724se_devices[] __initdata = {
&sh7724_usb0_host_device,
&sh7724_usb1_gadget_device,
&fsi_device,
&sdhi0_cn7_device,
};
#define EEPROM_OP 0xBA206000
@ -698,6 +721,16 @@ static int __init devices_setup(void)
clk_set_rate(&fsimcka_clk, 11000);
clk_put(fsia_clk);
/* SDHI0 connected to cn7 */
gpio_request(GPIO_FN_SDHI0CD, NULL);
gpio_request(GPIO_FN_SDHI0WP, NULL);
gpio_request(GPIO_FN_SDHI0D3, NULL);
gpio_request(GPIO_FN_SDHI0D2, NULL);
gpio_request(GPIO_FN_SDHI0D1, NULL);
gpio_request(GPIO_FN_SDHI0D0, NULL);
gpio_request(GPIO_FN_SDHI0CMD, NULL);
gpio_request(GPIO_FN_SDHI0CLK, NULL);
/*
* enable SH-Eth
*