AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

usb: gadget: atmel_usba_udc: Add suspend/resume with wakeup support

Browse Source 
This patch add suspend/resume with wakeup support for Atmel USBA.

On suspend: We stay continuously clocked if Vbus signal is not
available. If Vbus signal is available we set the Vbus signal as a wake
up source then we stop the USBA itself and all clocks used by USBA.

On resume: We recover clocks and USBA if we stopped them. If a device is
currently connected at resume time we enable the controller.

Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This commit is contained in:
Sylvain Rochet 2015-02-12 18:54:07 +01:00 committed by Felipe Balbi
parent a64ef71ddc
commit 112bf24471
1 changed files with 57 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

57
drivers/usb/gadget/udc/atmel_usba_udc.c
View File

@ -2177,6 +2177,7 @@ static int usba_udc_probe(struct platform_device *pdev)
ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
if (ret)
return ret;
device_init_wakeup(&pdev->dev, 1);
usba_init_debugfs(udc);
for (i = 1; i < udc->num_ep; i++)
@ -2192,6 +2193,7 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
udc = platform_get_drvdata(pdev);
device_init_wakeup(&pdev->dev, 0);
usb_del_gadget_udc(&udc->gadget);
for (i = 1; i < udc->num_ep; i++)
@ -2201,10 +2203,65 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM
static int usba_udc_suspend(struct device *dev)
{
struct usba_udc *udc = dev_get_drvdata(dev);
/* Not started */
if (!udc->driver)
return 0;
mutex_lock(&udc->vbus_mutex);
if (!device_may_wakeup(dev)) {
usba_stop(udc);
goto out;
}
/*
* Device may wake up. We stay clocked if we failed
* to request vbus irq, assuming always on.
*/
if (gpio_is_valid(udc->vbus_pin)) {
usba_stop(udc);
enable_irq_wake(gpio_to_irq(udc->vbus_pin));
}
out:
mutex_unlock(&udc->vbus_mutex);
return 0;
}
static int usba_udc_resume(struct device *dev)
{
struct usba_udc *udc = dev_get_drvdata(dev);
/* Not started */
if (!udc->driver)
return 0;
if (device_may_wakeup(dev) && gpio_is_valid(udc->vbus_pin))
disable_irq_wake(gpio_to_irq(udc->vbus_pin));
/* If Vbus is present, enable the controller and wait for reset */
mutex_lock(&udc->vbus_mutex);
udc->vbus_prev = vbus_is_present(udc);
if (udc->vbus_prev)
usba_start(udc);
mutex_unlock(&udc->vbus_mutex);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(usba_udc_pm_ops, usba_udc_suspend, usba_udc_resume);
static struct platform_driver udc_driver = {
.remove = __exit_p(usba_udc_remove),
.driver = {
.name = "atmel_usba_udc",
.pm = &usba_udc_pm_ops,
.of_match_table = of_match_ptr(atmel_udc_dt_ids),
},
};