AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

Merge branch 'master'

Browse Source
This commit is contained in:
Kumar Gala 2006-04-04 16:10:34 -05:00
commit 12df755670
556 changed files with 48623 additions and 9342 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/DocBook/Makefile
View File

@ -2,7 +2,7 @@
# This makefile is used to generate the kernel documentation,
# primarily based on in-line comments in various source files.
# See Documentation/kernel-doc-nano-HOWTO.txt for instruction in how
# to ducument the SRC - and how to read it.
# to document the SRC - and how to read it.
# To add a new book the only step required is to add the book to the
# list of DOCBOOKS.

1
Documentation/DocBook/kernel-api.tmpl
View File

@ -322,7 +322,6 @@ X!Earch/i386/kernel/mca.c
<chapter id="sysfs">
<title>The Filesystem for Exporting Kernel Objects</title>
!Efs/sysfs/file.c
!Efs/sysfs/dir.c
!Efs/sysfs/symlink.c
!Efs/sysfs/bin.c
</chapter>

2
Documentation/acpi-hotkey.txt
View File

@ -30,7 +30,7 @@ specific hotkey(event))
echo "event_num:event_type:event_argument" >
/proc/acpi/hotkey/action.
The result of the execution of this aml method is
attached to /proc/acpi/hotkey/poll_method, which is dnyamically
attached to /proc/acpi/hotkey/poll_method, which is dynamically
created. Please use command "cat /proc/acpi/hotkey/polling_method"
to retrieve it.

188
Documentation/fujitsu/frv/kernel-ABI.txt
View File

@ -1,17 +1,19 @@
=================================
INTERNAL KERNEL ABI FOR FR-V ARCH
=================================
=================================
INTERNAL KERNEL ABI FOR FR-V ARCH
=================================
The internal FRV kernel ABI is not quite the same as the userspace ABI. A number of the registers
are used for special purposed, and the ABI is not consistent between modules vs core, and MMU vs
no-MMU.
The internal FRV kernel ABI is not quite the same as the userspace ABI. A
number of the registers are used for special purposed, and the ABI is not
consistent between modules vs core, and MMU vs no-MMU.
This partly stems from the fact that FRV CPUs do not have a separate supervisor stack pointer, and
most of them do not have any scratch registers, thus requiring at least one general purpose
register to be clobbered in such an event. Also, within the kernel core, it is possible to simply
jump or call directly between functions using a relative offset. This cannot be extended to modules
for the displacement is likely to be too far. Thus in modules the address of a function to call
must be calculated in a register and then used, requiring two extra instructions.
This partly stems from the fact that FRV CPUs do not have a separate
supervisor stack pointer, and most of them do not have any scratch
registers, thus requiring at least one general purpose register to be
clobbered in such an event. Also, within the kernel core, it is possible to
simply jump or call directly between functions using a relative offset.
This cannot be extended to modules for the displacement is likely to be too
far. Thus in modules the address of a function to call must be calculated
in a register and then used, requiring two extra instructions.
This document has the following sections:
@ -39,7 +41,8 @@ When a system call is made, the following registers are effective:
CPU OPERATING MODES
===================
The FR-V CPU has three basic operating modes. In order of increasing capability:
The FR-V CPU has three basic operating modes. In order of increasing
capability:
(1) User mode.
@ -47,42 +50,46 @@ The FR-V CPU has three basic operating modes. In order of increasing capability:
(2) Kernel mode.
Normal kernel mode. There are many additional control registers available that may be
accessed in this mode, in addition to all the stuff available to user mode. This has two
submodes:
Normal kernel mode. There are many additional control registers
available that may be accessed in this mode, in addition to all the
stuff available to user mode. This has two submodes:
(a) Exceptions enabled (PSR.T == 1).
Exceptions will invoke the appropriate normal kernel mode handler. On entry to the
handler, the PSR.T bit will be cleared.
Exceptions will invoke the appropriate normal kernel mode
handler. On entry to the handler, the PSR.T bit will be cleared.
(b) Exceptions disabled (PSR.T == 0).
No exceptions or interrupts may happen. Any mandatory exceptions will cause the CPU to
halt unless the CPU is told to jump into debug mode instead.
No exceptions or interrupts may happen. Any mandatory exceptions
will cause the CPU to halt unless the CPU is told to jump into
debug mode instead.
(3) Debug mode.
No exceptions may happen in this mode. Memory protection and management exceptions will be
flagged for later consideration, but the exception handler won't be invoked. Debugging traps
such as hardware breakpoints and watchpoints will be ignored. This mode is entered only by
debugging events obtained from the other two modes.
No exceptions may happen in this mode. Memory protection and
management exceptions will be flagged for later consideration, but
the exception handler won't be invoked. Debugging traps such as
hardware breakpoints and watchpoints will be ignored. This mode is
entered only by debugging events obtained from the other two modes.
All kernel mode registers may be accessed, plus a few extra debugging specific registers.
All kernel mode registers may be accessed, plus a few extra debugging
specific registers.
=================================
INTERNAL KERNEL-MODE REGISTER ABI
=================================
There are a number of permanent register assignments that are set up by entry.S in the exception
prologue. Note that there is a complete set of exception prologues for each of user->kernel
transition and kernel->kernel transition. There are also user->debug and kernel->debug mode
transition prologues.
There are a number of permanent register assignments that are set up by
entry.S in the exception prologue. Note that there is a complete set of
exception prologues for each of user->kernel transition and kernel->kernel
transition. There are also user->debug and kernel->debug mode transition
prologues.
REGISTER FLAVOUR USE
=============== ======= ====================================================
=============== ======= ==============================================
GR1 Supervisor stack pointer
GR15 Current thread info pointer
GR16 GP-Rel base register for small data
@ -92,10 +99,12 @@ transition prologues.
GR31 NOMMU Destroyed by debug mode entry
GR31 MMU Destroyed by TLB miss kernel mode entry
CCR.ICC2 Virtual interrupt disablement tracking
CCCR.CC3 Cleared by exception prologue (atomic op emulation)
CCCR.CC3 Cleared by exception prologue
(atomic op emulation)
SCR0 MMU See mmu-layout.txt.
SCR1 MMU See mmu-layout.txt.
SCR2 MMU Save for EAR0 (destroyed by icache insns in debug mode)
SCR2 MMU Save for EAR0 (destroyed by icache insns
in debug mode)
SCR3 MMU Save for GR31 during debug exceptions
DAMR/IAMR NOMMU Fixed memory protection layout.
DAMR/IAMR MMU See mmu-layout.txt.
@ -104,18 +113,21 @@ transition prologues.
Certain registers are also used or modified across function calls:
REGISTER CALL RETURN
=============== =============================== ===============================
=============== =============================== ======================
GR0 Fixed Zero -
GR2 Function call frame pointer
GR3 Special Preserved
GR3-GR7 - Clobbered
GR8 Function call arg #1 Return value (or clobbered)
GR9 Function call arg #2 Return value MSW (or clobbered)
GR8 Function call arg #1 Return value
(or clobbered)
GR9 Function call arg #2 Return value MSW
(or clobbered)
GR10-GR13 Function call arg #3-#6 Clobbered
GR14 - Clobbered
GR15-GR16 Special Preserved
GR17-GR27 - Preserved
GR28-GR31 Special Only accessed explicitly
GR28-GR31 Special Only accessed
explicitly
LR Return address after CALL Clobbered
CCR/CCCR - Mostly Clobbered
@ -124,46 +136,53 @@ Certain registers are also used or modified across function calls:
INTERNAL DEBUG-MODE REGISTER ABI
================================
This is the same as the kernel-mode register ABI for functions calls. The difference is that in
debug-mode there's a different stack and a different exception frame. Almost all the global
registers from kernel-mode (including the stack pointer) may be changed.
This is the same as the kernel-mode register ABI for functions calls. The
difference is that in debug-mode there's a different stack and a different
exception frame. Almost all the global registers from kernel-mode
(including the stack pointer) may be changed.
REGISTER FLAVOUR USE
=============== ======= ====================================================
=============== ======= ==============================================
GR1 Debug stack pointer
GR16 GP-Rel base register for small data
GR31 Current debug exception frame pointer (__debug_frame)
GR31 Current debug exception frame pointer
(__debug_frame)
SCR3 MMU Saved value of GR31
Note that debug mode is able to interfere with the kernel's emulated atomic ops, so it must be
exceedingly careful not to do any that would interact with the main kernel in this regard. Hence
the debug mode code (gdbstub) is almost completely self-contained. The only external code used is
the sprintf family of functions.
Note that debug mode is able to interfere with the kernel's emulated atomic
ops, so it must be exceedingly careful not to do any that would interact
with the main kernel in this regard. Hence the debug mode code (gdbstub) is
almost completely self-contained. The only external code used is the
sprintf family of functions.
Futhermore, break.S is so complicated because single-step mode does not switch off on entry to an
exception. That means unless manually disabled, single-stepping will blithely go on stepping into
things like interrupts. See gdbstub.txt for more information.
Futhermore, break.S is so complicated because single-step mode does not
switch off on entry to an exception. That means unless manually disabled,
single-stepping will blithely go on stepping into things like interrupts.
See gdbstub.txt for more information.
==========================
VIRTUAL INTERRUPT HANDLING
==========================
Because accesses to the PSR is so slow, and to disable interrupts we have to access it twice (once
to read and once to write), we don't actually disable interrupts at all if we don't have to. What
we do instead is use the ICC2 condition code flags to note virtual disablement, such that if we
then do take an interrupt, we note the flag, really disable interrupts, set another flag and resume
execution at the point the interrupt happened. Setting condition flags as a side effect of an
arithmetic or logical instruction is really fast. This use of the ICC2 only occurs within the
Because accesses to the PSR is so slow, and to disable interrupts we have
to access it twice (once to read and once to write), we don't actually
disable interrupts at all if we don't have to. What we do instead is use
the ICC2 condition code flags to note virtual disablement, such that if we
then do take an interrupt, we note the flag, really disable interrupts, set
another flag and resume execution at the point the interrupt happened.
Setting condition flags as a side effect of an arithmetic or logical
instruction is really fast. This use of the ICC2 only occurs within the
kernel - it does not affect userspace.
The flags we use are:
(*) CCR.ICC2.Z [Zero flag]
Set to virtually disable interrupts, clear when interrupts are virtually enabled. Can be
modified by logical instructions without affecting the Carry flag.
Set to virtually disable interrupts, clear when interrupts are
virtually enabled. Can be modified by logical instructions without
affecting the Carry flag.
(*) CCR.ICC2.C [Carry flag]
@ -176,8 +195,9 @@ What happens is this:
ICC2.Z is 0, ICC2.C is 1.
(2) An interrupt occurs. The exception prologue examines ICC2.Z and determines that nothing needs
doing. This is done simply with an unlikely BEQ instruction.
(2) An interrupt occurs. The exception prologue examines ICC2.Z and
determines that nothing needs doing. This is done simply with an
unlikely BEQ instruction.
(3) The interrupts are disabled (local_irq_disable)
@ -187,48 +207,56 @@ What happens is this:
ICC2.Z would be set to 0.
A TIHI #2 instruction (trap #2 if condition HI - Z==0 && C==0) would be used to trap if
interrupts were now virtually enabled, but physically disabled - which they're not, so the
trap isn't taken. The kernel would then be back to state (1).
A TIHI #2 instruction (trap #2 if condition HI - Z==0 && C==0) would
be used to trap if interrupts were now virtually enabled, but
physically disabled - which they're not, so the trap isn't taken. The
kernel would then be back to state (1).
(5) An interrupt occurs. The exception prologue examines ICC2.Z and determines that the interrupt
shouldn't actually have happened. It jumps aside, and there disabled interrupts by setting
PSR.PIL to 14 and then it clears ICC2.C.
(5) An interrupt occurs. The exception prologue examines ICC2.Z and
determines that the interrupt shouldn't actually have happened. It
jumps aside, and there disabled interrupts by setting PSR.PIL to 14
and then it clears ICC2.C.
(6) If interrupts were then saved and disabled again (local_irq_save):
ICC2.Z would be shifted into the save variable and masked off (giving a 1).
ICC2.Z would be shifted into the save variable and masked off
(giving a 1).
ICC2.Z would then be set to 1 (thus unchanged), and ICC2.C would be unaffected (ie: 0).
ICC2.Z would then be set to 1 (thus unchanged), and ICC2.C would be
unaffected (ie: 0).
(7) If interrupts were then restored from state (6) (local_irq_restore):
ICC2.Z would be set to indicate the result of XOR'ing the saved value (ie: 1) with 1, which
gives a result of 0 - thus leaving ICC2.Z set.
ICC2.Z would be set to indicate the result of XOR'ing the saved
value (ie: 1) with 1, which gives a result of 0 - thus leaving
ICC2.Z set.
ICC2.C would remain unaffected (ie: 0).
A TIHI #2 instruction would be used to again assay the current state, but this would do
nothing as Z==1.
A TIHI #2 instruction would be used to again assay the current state,
but this would do nothing as Z==1.
(8) If interrupts were then enabled (local_irq_enable):
ICC2.Z would be cleared. ICC2.C would be left unaffected. Both flags would now be 0.
ICC2.Z would be cleared. ICC2.C would be left unaffected. Both
flags would now be 0.
A TIHI #2 instruction again issued to assay the current state would then trap as both Z==0
[interrupts virtually enabled] and C==0 [interrupts really disabled] would then be true.
A TIHI #2 instruction again issued to assay the current state would
then trap as both Z==0 [interrupts virtually enabled] and C==0
[interrupts really disabled] would then be true.
(9) The trap #2 handler would simply enable hardware interrupts (set PSR.PIL to 0), set ICC2.C to
1 and return.
(9) The trap #2 handler would simply enable hardware interrupts
(set PSR.PIL to 0), set ICC2.C to 1 and return.
(10) Immediately upon returning, the pending interrupt would be taken.
(11) The interrupt handler would take the path of actually processing the interrupt (ICC2.Z is
clear, BEQ fails as per step (2)).
(11) The interrupt handler would take the path of actually processing the
interrupt (ICC2.Z is clear, BEQ fails as per step (2)).
(12) The interrupt handler would then set ICC2.C to 1 since hardware interrupts are definitely
enabled - or else the kernel wouldn't be here.
(12) The interrupt handler would then set ICC2.C to 1 since hardware
interrupts are definitely enabled - or else the kernel wouldn't be here.
(13) On return from the interrupt handler, things would be back to state (1).
This trap (#2) is only available in kernel mode. In user mode it will result in SIGILL.
This trap (#2) is only available in kernel mode. In user mode it will
result in SIGILL.

11
Documentation/input/joystick-parport.txt
View File

@ -36,12 +36,12 @@ with them.
All NES and SNES use the same synchronous serial protocol, clocked from
the computer's side (and thus timing insensitive). To allow up to 5 NES
and/or SNES gamepads connected to the parallel port at once, the output
lines of the parallel port are shared, while one of 5 available input lines
is assigned to each gamepad.
and/or SNES gamepads and/or SNES mice connected to the parallel port at once,
the output lines of the parallel port are shared, while one of 5 available
input lines is assigned to each gamepad.
This protocol is handled by the gamecon.c driver, so that's the one
you'll use for NES and SNES gamepads.
you'll use for NES, SNES gamepads and SNES mice.
The main problem with PC parallel ports is that they don't have +5V power
source on any of their pins. So, if you want a reliable source of power
@ -106,7 +106,7 @@ A, Turbo B, Select and Start, and is connected through 5 wires, then it is
either a NES or NES clone and will work with this connection. SNES gamepads
also use 5 wires, but have more buttons. They will work as well, of course.
Pinout for NES gamepads Pinout for SNES gamepads
Pinout for NES gamepads Pinout for SNES gamepads and mice
+----> Power +-----------------------\
| 7 | o o o o | x x o | 1
@ -454,6 +454,7 @@ uses the following kernel/module command line:
6 | N64 pad
7 | Sony PSX controller
8 | Sony PSX DDR controller
9 | SNES mouse
The exact type of the PSX controller type is autoprobed when used so
hot swapping should work (but is not recomended).

34
Documentation/kernel-parameters.txt
View File

@ -1,4 +1,4 @@
February 2003 Kernel Parameters v2.5.59
Kernel Parameters
~~~~~~~~~~~~~~~~~
The following is a consolidated list of the kernel parameters as implemented
@ -17,9 +17,17 @@ are specified on the kernel command line with the module name plus
usbcore.blinkenlights=1
The text in square brackets at the beginning of the description states the
restrictions on the kernel for the said kernel parameter to be valid. The
restrictions referred to are that the relevant option is valid if:
This document may not be entirely up to date and comprehensive. The command
"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
module. Loadable modules, after being loaded into the running kernel, also
reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
parameters may be changed at runtime by the command
"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
The parameters listed below are only valid if certain kernel build options were
enabled and if respective hardware is present. The text in square brackets at
the beginning of each description states the restrictions within which a
parameter is applicable:
ACPI ACPI support is enabled.
ALSA ALSA sound support is enabled.
@ -1046,10 +1054,10 @@ running once the system is up.
noltlbs [PPC] Do not use large page/tlb entries for kernel
lowmem mapping on PPC40x.
nomce [IA-32] Machine Check Exception
nomca [IA-64] Disable machine check abort handling
nomce [IA-32] Machine Check Exception
noresidual [PPC] Don't use residual data on PReP machines.
noresume [SWSUSP] Disables resume and restores original swap
@ -1682,20 +1690,6 @@ running once the system is up.
______________________________________________________________________
Changelog:
2000-06-?? Mr. Unknown
The last known update (for 2.4.0) - the changelog was not kept before.
2002-11-24 Petr Baudis <pasky@ucw.cz>
Randy Dunlap <randy.dunlap@verizon.net>
Update for 2.5.49, description for most of the options introduced,
references to other documentation (C files, READMEs, ..), added S390,
PPC, SPARC, MTD, ALSA and OSS category. Minor corrections and
reformatting.
2005-10-19 Randy Dunlap <rdunlap@xenotime.net>
Lots of typos, whitespace, some reformatting.
TODO:

2
Documentation/networking/packet_mmap.txt
View File

@ -254,7 +254,7 @@ and, the number of frames be
<block number> * <block size> / <frame size>
Suposse the following parameters, which apply for 2.6 kernel and an
Suppose the following parameters, which apply for 2.6 kernel and an
i386 architecture:
<size-max> = 131072 bytes

2
Documentation/networking/tuntap.txt
View File

@ -138,7 +138,7 @@ This means that you have to read/write IP packets when you are using tun and
ethernet frames when using tap.
5. What is the difference between BPF and TUN/TAP driver?
BFP is an advanced packet filter. It can be attached to existing
BPF is an advanced packet filter. It can be attached to existing
network interface. It does not provide a virtual network interface.
A TUN/TAP driver does provide a virtual network interface and it is possible
to attach BPF to this interface.

6
Documentation/pcmcia/driver-changes.txt
View File

@ -1,5 +1,11 @@
This file details changes in 2.6 which affect PCMCIA card driver authors:
* New release helper (as of 2.6.17)
Instead of calling pcmcia_release_{configuration,io,irq,win}, all that's
necessary now is calling pcmcia_disable_device. As there is no valid
reason left to call pcmcia_release_io and pcmcia_release_irq, the
exports for them were removed.
* Unify detach and REMOVAL event code, as well as attach and INSERTION
code (as of 2.6.16)
void (*remove) (struct pcmcia_device *dev);

69
Documentation/sound/alsa/ALSA-Configuration.txt
View File

@ -120,6 +120,34 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
enable - enable card
- Default: enabled, for PCI and ISA PnP cards
Module snd-adlib
----------------
Module for AdLib FM cards.
port - port # for OPL chip
This module supports multiple cards. It does not support autoprobe, so
the port must be specified. For actual AdLib FM cards it will be 0x388.
Note that this card does not have PCM support and no mixer; only FM
synthesis.
Make sure you have "sbiload" from the alsa-tools package available and,
after loading the module, find out the assigned ALSA sequencer port
number through "sbiload -l". Example output:
Port Client name Port name
64:0 OPL2 FM synth OPL2 FM Port
Load the std.sb and drums.sb patches also supplied by sbiload:
sbiload -p 64:0 std.sb drums.sb
If you use this driver to drive an OPL3, you can use std.o3 and drums.o3
instead. To have the card produce sound, use aplaymidi from alsa-utils:
aplaymidi -p 64:0 foo.mid
Module snd-ad1816a
------------------
@ -190,6 +218,15 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
The power-management is supported.
Module snd-als300
-----------------
Module for Avance Logic ALS300 and ALS300+
This module supports multiple cards.
The power-management is supported.
Module snd-als4000
------------------
@ -701,6 +738,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
uniwill 3-jack
F1734 2-jack
lg LG laptop (m1 express dual)
lg-lw LG LW20 laptop
test for testing/debugging purpose, almost all controls can be
adjusted. Appearing only when compiled with
$CONFIG_SND_DEBUG=y
@ -1013,6 +1051,23 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
The power-management is supported.
Module snd-miro
---------------
Module for Miro soundcards: miroSOUND PCM 1 pro,
miroSOUND PCM 12,
miroSOUND PCM 20 Radio.
port - Port # (0x530,0x604,0xe80,0xf40)
irq - IRQ # (5,7,9,10,11)
dma1 - 1st dma # (0,1,3)
dma2 - 2nd dma # (0,1)
mpu_port - MPU-401 port # (0x300,0x310,0x320,0x330)
mpu_irq - MPU-401 irq # (5,7,9,10)
fm_port - FM Port # (0x388)
wss - enable WSS mode
ide - enable onboard ide support
Module snd-mixart
-----------------
@ -1202,6 +1257,20 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
The power-management is supported.
Module snd-riptide
------------------
Module for Conexant Riptide chip
joystick_port - Joystick port # (default: 0x200)
mpu_port - MPU401 port # (default: 0x330)
opl3_port - OPL3 port # (default: 0x388)
This module supports multiple cards.
The driver requires the firmware loader support on kernel.
You need to install the firmware file "riptide.hex" to the standard
firmware path (e.g. /lib/firmware).
Module snd-rme32
----------------

5
Documentation/video4linux/CARDLIST.saa7134
View File

@ -52,7 +52,7 @@
51 -> ProVideo PV952 [1540:9524]
52 -> AverMedia AverTV/305 [1461:2108]
53 -> ASUS TV-FM 7135 [1043:4845]
54 -> LifeView FlyTV Platinum FM [5168:0214,1489:0214]
54 -> LifeView FlyTV Platinum FM / Gold [5168:0214,1489:0214,5168:0304]
55 -> LifeView FlyDVB-T DUO [5168:0306]
56 -> Avermedia AVerTV 307 [1461:a70a]
57 -> Avermedia AVerTV GO 007 FM [1461:f31f]
@ -84,7 +84,7 @@
83 -> Terratec Cinergy 250 PCI TV [153b:1160]
84 -> LifeView FlyDVB Trio [5168:0319]
85 -> AverTV DVB-T 777 [1461:2c05]
86 -> LifeView FlyDVB-T [5168:0301]
86 -> LifeView FlyDVB-T / Genius VideoWonder DVB-T [5168:0301,1489:0301]
87 -> ADS Instant TV Duo Cardbus PTV331 [0331:1421]
88 -> Tevion/KWorld DVB-T 220RF [17de:7201]
89 -> ELSA EX-VISION 700TV [1048:226c]
@ -92,3 +92,4 @@
91 -> AVerMedia A169 B [1461:7360]
92 -> AVerMedia A169 B1 [1461:6360]
93 -> Medion 7134 Bridge #2 [16be:0005]
94 -> LifeView FlyDVB-T Hybrid Cardbus [5168:3306,5168:3502]

0
Documentation/usb/et61x251.txt → Documentation/video4linux/et61x251.txt
View File

2
Documentation/usb/ibmcam.txt → Documentation/video4linux/ibmcam.txt
View File

@ -122,7 +122,7 @@ WHAT YOU NEED:
- A Linux box with USB support (2.3/2.4; 2.2 w/backport may work)
- A Video4Linux compatible frame grabber program such as xawtv.
HOW TO COMPILE THE DRIVER:
You need to compile the driver only if you are a developer

11
Documentation/usb/ov511.txt → Documentation/video4linux/ov511.txt
View File

@ -9,7 +9,7 @@ INTRODUCTION:
This is a driver for the OV511, a USB-only chip used in many "webcam" devices.
Any camera using the OV511/OV511+ and the OV6620/OV7610/20/20AE should work.
Video capture devices that use the Philips SAA7111A decoder also work. It
Video capture devices that use the Philips SAA7111A decoder also work. It
supports streaming and capture of color or monochrome video via the Video4Linux
API. Most V4L apps are compatible with it. Most resolutions with a width and
height that are a multiple of 8 are supported.
@ -52,15 +52,15 @@ from it:
chmod 666 /dev/video
chmod 666 /dev/video0 (if necessary)
Now you are ready to run a video app! Both vidcat and xawtv work well for me
at 640x480.
[Using vidcat:]
vidcat -s 640x480 -p c > test.jpg
xview test.jpg
[Using xawtv:]
From the main xawtv directory:
@ -70,7 +70,7 @@ From the main xawtv directory:
make
make install
Now you should be able to run xawtv. Right click for the options dialog.
Now you should be able to run xawtv. Right click for the options dialog.
MODULE PARAMETERS:
@ -286,4 +286,3 @@ Randy Dunlap, and others. Big thanks to them for their pioneering work on that
and the USB stack. Thanks to Bret Wallach for getting camera reg IO, ISOC, and
image capture working. Thanks to Orion Sky Lawlor, Kevin Moore, and Claudio
Matsuoka for their work as well.

0
Documentation/usb/se401.txt → Documentation/video4linux/se401.txt
View File

16
Documentation/usb/sn9c102.txt → Documentation/video4linux/sn9c102.txt
View File

@ -174,7 +174,7 @@ Module parameters are listed below:
-------------------------------------------------------------------------------
Name: video_nr
Type: short array (min = 0, max = 64)
Syntax: <-1|n[,...]>
Syntax: <-1|n[,...]>
Description: Specify V4L2 minor mode number:
-1 = use next available
n = use minor number n
@ -187,7 +187,7 @@ Default: -1
-------------------------------------------------------------------------------
Name: force_munmap
Type: bool array (min = 0, max = 64)
Syntax: <0|1[,...]>
Syntax: <0|1[,...]>
Description: Force the application to unmap previously mapped buffer memory
before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not
all the applications support this feature. This parameter is
@ -206,7 +206,7 @@ Default: 2
-------------------------------------------------------------------------------
Name: debug
Type: ushort
Syntax: <n>
Syntax: <n>
Description: Debugging information level, from 0 to 3:
0 = none (use carefully)
1 = critical errors
@ -267,7 +267,7 @@ The sysfs interface also provides the "frame_header" entry, which exports the
frame header of the most recent requested and captured video frame. The header
is always 18-bytes long and is appended to every video frame by the SN9C10x
controllers. As an example, this additional information can be used by the user
application for implementing auto-exposure features via software.
application for implementing auto-exposure features via software.
The following table describes the frame header:
@ -441,7 +441,7 @@ blue pixels in one video frame. Each pixel is associated with a 8-bit long
value and is disposed in memory according to the pattern shown below:
B[0] G[1] B[2] G[3] ... B[m-2] G[m-1]
G[m] R[m+1] G[m+2] R[m+2] ... G[2m-2] R[2m-1]
G[m] R[m+1] G[m+2] R[m+2] ... G[2m-2] R[2m-1]
...
... B[(n-1)(m-2)] G[(n-1)(m-1)]
... G[n(m-2)] R[n(m-1)]
@ -472,12 +472,12 @@ The pixel reference value is calculated as follows:
The algorithm purely describes the conversion from compressed Bayer code used
in the SN9C10x chips to uncompressed Bayer. Additional steps are required to
convert this to a color image (i.e. a color interpolation algorithm).
The following Huffman codes have been found:
0: +0 (relative to reference pixel value)
0: +0 (relative to reference pixel value)
100: +4
101: -4?
1110xxxx: set absolute value to xxxx.0000
1110xxxx: set absolute value to xxxx.0000
1101: +11
1111: -11
11001: +20

26
Documentation/usb/stv680.txt → Documentation/video4linux/stv680.txt
View File

@ -5,15 +5,15 @@ Copyright, 2001, Kevin Sisson
INTRODUCTION:
STMicroelectronics produces the STV0680B chip, which comes in two
types, -001 and -003. The -003 version allows the recording and downloading
of sound clips from the camera, and allows a flash attachment. Otherwise,
it uses the same commands as the -001 version. Both versions support a
variety of SDRAM sizes and sensors, allowing for a maximum of 26 VGA or 20
CIF pictures. The STV0680 supports either a serial or a usb interface, and
STMicroelectronics produces the STV0680B chip, which comes in two
types, -001 and -003. The -003 version allows the recording and downloading
of sound clips from the camera, and allows a flash attachment. Otherwise,
it uses the same commands as the -001 version. Both versions support a
variety of SDRAM sizes and sensors, allowing for a maximum of 26 VGA or 20
CIF pictures. The STV0680 supports either a serial or a usb interface, and
video is possible through the usb interface.
The following cameras are known to work with this driver, although any
The following cameras are known to work with this driver, although any
camera with Vendor/Product codes of 0553/0202 should work:
Aiptek Pencam (various models)
@ -34,15 +34,15 @@ http://www.linux-usb.org
MODULE OPTIONS:
When the driver is compiled as a module, you can set a "swapRGB=1"
option, if necessary, for those applications that require it
(such as xawtv). However, the driver should detect and set this
option, if necessary, for those applications that require it
(such as xawtv). However, the driver should detect and set this
automatically, so this option should not normally be used.
KNOWN PROBLEMS:
The driver seems to work better with the usb-ohci than the usb-uhci host
controller driver.
The driver seems to work better with the usb-ohci than the usb-uhci host
controller driver.
HELP:
@ -50,6 +50,4 @@ The latest info on this driver can be found at:
http://personal.clt.bellsouth.net/~kjsisson or at
http://stv0680-usb.sourceforge.net
Any questions to me can be send to: kjsisson@bellsouth.net
Any questions to me can be send to: kjsisson@bellsouth.net

36
Documentation/usb/w9968cf.txt → Documentation/video4linux/w9968cf.txt
View File

@ -1,5 +1,5 @@
W996[87]CF JPEG USB Dual Mode Camera Chip
W996[87]CF JPEG USB Dual Mode Camera Chip
Driver for Linux 2.6 (basic version)
=========================================
@ -115,7 +115,7 @@ additional testing and full support, would be much appreciated.
======================
For it to work properly, the driver needs kernel support for Video4Linux, USB
and I2C, and the "ovcamchip" module for the image sensor. Make sure you are not
actually using any external "ovcamchip" module, given that the W996[87]CF
actually using any external "ovcamchip" module, given that the W996[87]CF
driver depends on the version of the module present in the official kernels.
The following options of the kernel configuration file must be enabled and
@ -197,16 +197,16 @@ Note: The kernel must be compiled with the CONFIG_KMOD option
enabled for the 'ovcamchip' module to be loaded and for
this parameter to be present.
-------------------------------------------------------------------------------
Name: simcams
Type: int
Syntax: <n>
Name: simcams
Type: int
Syntax: <n>
Description: Number of cameras allowed to stream simultaneously.
n may vary from 0 to 32.
Default: 32
-------------------------------------------------------------------------------
Name: video_nr
Type: int array (min = 0, max = 32)
Syntax: <-1|n[,...]>
Syntax: <-1|n[,...]>
Description: Specify V4L minor mode number.
-1 = use next available
n = use minor number n
@ -219,7 +219,7 @@ Default: -1
-------------------------------------------------------------------------------
Name: packet_size
Type: int array (min = 0, max = 32)
Syntax: <n[,...]>
Syntax: <n[,...]>
Description: Specify the maximum data payload size in bytes for alternate
settings, for each device. n is scaled between 63 and 1023.
Default: 1023
@ -234,7 +234,7 @@ Default: 2
-------------------------------------------------------------------------------
Name: double_buffer
Type: bool array (min = 0, max = 32)
Syntax: <0|1[,...]>
Syntax: <0|1[,...]>
Description: Hardware double buffering: 0 disabled, 1 enabled.
It should be enabled if you want smooth video output: if you
obtain out of sync. video, disable it, or try to
@ -243,13 +243,13 @@ Default: 1 for every device.
-------------------------------------------------------------------------------
Name: clamping
Type: bool array (min = 0, max = 32)
Syntax: <0|1[,...]>
Syntax: <0|1[,...]>
Description: Video data clamping: 0 disabled, 1 enabled.
Default: 0 for every device.
-------------------------------------------------------------------------------
Name: filter_type
Type: int array (min = 0, max = 32)
Syntax: <0|1|2[,...]>
Syntax: <0|1|2[,...]>
Description: Video filter type.
0 none, 1 (1-2-1) 3-tap filter, 2 (2-3-6-3-2) 5-tap filter.
The filter is used to reduce noise and aliasing artifacts
@ -258,13 +258,13 @@ Default: 0 for every device.
-------------------------------------------------------------------------------
Name: largeview
Type: bool array (min = 0, max = 32)
Syntax: <0|1[,...]>
Syntax: <0|1[,...]>
Description: Large view: 0 disabled, 1 enabled.
Default: 1 for every device.
-------------------------------------------------------------------------------
Name: upscaling
Type: bool array (min = 0, max = 32)
Syntax: <0|1[,...]>
Syntax: <0|1[,...]>
Description: Software scaling (for non-compressed video only):
0 disabled, 1 enabled.
Disable it if you have a slow CPU or you don't have enough
@ -341,8 +341,8 @@ Default: 50 for every device.
-------------------------------------------------------------------------------
Name: bandingfilter
Type: bool array (min = 0, max = 32)
Syntax: <0|1[,...]>
Description: Banding filter to reduce effects of fluorescent
Syntax: <0|1[,...]>
Description: Banding filter to reduce effects of fluorescent
lighting:
0 disabled, 1 enabled.
This filter tries to reduce the pattern of horizontal
@ -374,7 +374,7 @@ Default: 0 for every device.
-------------------------------------------------------------------------------
Name: monochrome
Type: bool array (min = 0, max = 32)
Syntax: <0|1[,...]>
Syntax: <0|1[,...]>
Description: The image sensor is monochrome:
0 = no, 1 = yes
Default: 0 for every device.
@ -400,19 +400,19 @@ Default: 32768 for every device.
-------------------------------------------------------------------------------
Name: contrast
Type: long array (min = 0, max = 32)
Syntax: <n[,...]>
Syntax: <n[,...]>
Description: Set picture contrast (0-65535).
Default: 50000 for every device.
-------------------------------------------------------------------------------
Name: whiteness
Type: long array (min = 0, max = 32)
Syntax: <n[,...]>
Syntax: <n[,...]>
Description: Set picture whiteness (0-65535).
Default: 32768 for every device.
-------------------------------------------------------------------------------
Name: debug
Type: int
Syntax: <n>
Syntax: <n>
Description: Debugging information level, from 0 to 6:
0 = none (use carefully)
1 = critical errors

0
Documentation/usb/zc0301.txt → Documentation/video4linux/zc0301.txt
View File

6
MAINTAINERS
View File

@ -1451,6 +1451,12 @@ P: Juanjo Ciarlante
M: jjciarla@raiz.uncu.edu.ar
S: Maintained
IPATH DRIVER:
P: Bryan O'Sullivan
M: support@pathscale.com
L: openib-general@openib.org
S: Supported
IPX NETWORK LAYER
P: Arnaldo Carvalho de Melo
M: acme@conectiva.com.br

4
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 16
EXTRAVERSION =
SUBLEVEL = 17
EXTRAVERSION =-rc1
NAME=Sliding Snow Leopard
# *DOCUMENTATION*

18
arch/alpha/kernel/setup.c
View File

@ -28,6 +28,7 @@
#include <linux/init.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/bootmem.h>
#include <linux/pci.h>
#include <linux/seq_file.h>
@ -1478,3 +1479,20 @@ alpha_panic_event(struct notifier_block *this, unsigned long event, void *ptr)
#endif
return NOTIFY_DONE;
}
static __init int add_pcspkr(void)
{
struct platform_device *pd;
int ret;
pd = platform_device_alloc("pcspkr", -1);
if (!pd)
return -ENOMEM;
ret = platform_device_add(pd);
if (ret)
platform_device_put(pd);
return ret;
}
device_initcall(add_pcspkr);

2
arch/arm/configs/at91rm9200dk_defconfig
View File

@ -379,7 +379,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_AT91_DATAFLASH=y
CONFIG_MTD_AT91_DATAFLASH_CARD=y
# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
#
# NAND Flash Device Drivers

2
arch/arm/configs/at91rm9200ek_defconfig
View File

@ -370,7 +370,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_AT91_DATAFLASH=y
CONFIG_MTD_AT91_DATAFLASH_CARD=y
# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
#
# NAND Flash Device Drivers

13
arch/arm/kernel/armksyms.c
View File

@ -100,23 +100,12 @@ EXPORT_SYMBOL(__raw_writesl);
#endif
/* string / mem functions */
EXPORT_SYMBOL(strcpy);
EXPORT_SYMBOL(strncpy);
EXPORT_SYMBOL(strcat);
EXPORT_SYMBOL(strncat);
EXPORT_SYMBOL(strcmp);
EXPORT_SYMBOL(strncmp);
EXPORT_SYMBOL(strchr);
EXPORT_SYMBOL(strlen);
EXPORT_SYMBOL(strnlen);
EXPORT_SYMBOL(strpbrk);
EXPORT_SYMBOL(strrchr);
EXPORT_SYMBOL(strstr);
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(memcmp);
EXPORT_SYMBOL(memscan);
EXPORT_SYMBOL(memchr);
EXPORT_SYMBOL(__memzero);
@ -190,8 +179,6 @@ EXPORT_SYMBOL(_find_next_bit_be);
/* syscalls */
EXPORT_SYMBOL(sys_write);
EXPORT_SYMBOL(sys_read);
EXPORT_SYMBOL(sys_lseek);
EXPORT_SYMBOL(sys_open);
EXPORT_SYMBOL(sys_exit);
EXPORT_SYMBOL(sys_wait4);

3
arch/arm/kernel/setup.c
View File

@ -252,6 +252,9 @@ static void __init dump_cpu_info(int cpu)
dump_cache("cache", cpu, CACHE_ISIZE(info));
}
}
if (arch_is_coherent())
printk("Cache coherency enabled\n");
}
int cpu_architecture(void)

9
arch/arm/mach-at91rm9200/Makefile
View File

@ -16,11 +16,12 @@ obj-$(CONFIG_MACH_CSB637) += board-csb637.o
#obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
# LEDs support
#led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
#led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
#led-$(CONFIG_MACH_CSB337) += leds.o
#led-$(CONFIG_MACH_CSB637) += leds.o
led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
led-$(CONFIG_MACH_CSB337) += leds.o
led-$(CONFIG_MACH_CSB637) += leds.o
#led-$(CONFIG_MACH_KB9200) += leds.o
#led-$(CONFIG_MACH_KAFA) += leds.o
obj-$(CONFIG_LEDS) += $(led-y)
# VGA support

3
arch/arm/mach-at91rm9200/board-csb337.c
View File

@ -67,6 +67,9 @@ static void __init csb337_map_io(void)
/* Initialize clocks: 3.6864 MHz crystal */
at91_clock_init(3686400);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
#ifdef CONFIG_SERIAL_AT91
at91_console_port = CSB337_SERIAL_CONSOLE;
memcpy(at91_serial_map, serial, sizeof(serial));

3
arch/arm/mach-at91rm9200/board-csb637.c
View File

@ -67,6 +67,9 @@ static void __init csb637_map_io(void)
/* Initialize clocks: 3.6864 MHz crystal */
at91_clock_init(3686400);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
#ifdef CONFIG_SERIAL_AT91
at91_console_port = CSB637_SERIAL_CONSOLE;
memcpy(at91_serial_map, serial, sizeof(serial));

10
arch/arm/mach-at91rm9200/board-dk.c
View File

@ -70,6 +70,9 @@ static void __init dk_map_io(void)
/* Initialize clocks: 18.432 MHz crystal */
at91_clock_init(18432000);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
#ifdef CONFIG_SERIAL_AT91
at91_console_port = DK_SERIAL_CONSOLE;
memcpy(at91_serial_map, serial, sizeof(serial));
@ -118,9 +121,14 @@ static void __init dk_board_init(void)
at91_add_device_udc(&dk_udc_data);
/* Compact Flash */
at91_add_device_cf(&dk_cf_data);
#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
/* DataFlash card */
at91_set_gpio_output(AT91_PIN_PB7, 0);
#else
/* MMC */
at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). default: MMC */
at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
at91_add_device_mmc(&dk_mmc_data);
#endif
/* VGA */
// dk_add_device_video();
}

10
arch/arm/mach-at91rm9200/board-ek.c
View File

@ -70,6 +70,9 @@ static void __init ek_map_io(void)
/* Initialize clocks: 18.432 MHz crystal */
at91_clock_init(18432000);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
#ifdef CONFIG_SERIAL_AT91
at91_console_port = EK_SERIAL_CONSOLE;
memcpy(at91_serial_map, serial, sizeof(serial));
@ -111,9 +114,14 @@ static void __init ek_board_init(void)
at91_add_device_usbh(&ek_usbh_data);
/* USB Device */
at91_add_device_udc(&ek_udc_data);
#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
/* DataFlash card */
at91_set_gpio_output(AT91_PIN_PB22, 0);
#else
/* MMC */
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). default: MMC */
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
at91_add_device_mmc(&ek_mmc_data);
#endif
/* VGA */
// ek_add_device_video();
}

154
arch/arm/mach-at91rm9200/devices.c
View File

@ -28,10 +28,10 @@
static u64 ohci_dmamask = 0xffffffffUL;
static struct at91_usbh_data usbh_data;
static struct resource at91rm9200_usbh_resource[] = {
static struct resource at91_usbh_resource[] = {
[0] = {
.start = AT91_UHP_BASE,
.end = AT91_UHP_BASE + SZ_1M -1,
.end = AT91_UHP_BASE + SZ_1M - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@ -49,8 +49,8 @@ static struct platform_device at91rm9200_usbh_device = {
.coherent_dma_mask = 0xffffffff,
.platform_data = &usbh_data,
},
.resource = at91rm9200_usbh_resource,
.num_resources = ARRAY_SIZE(at91rm9200_usbh_resource),
.resource = at91_usbh_resource,
.num_resources = ARRAY_SIZE(at91_usbh_resource),
};
void __init at91_add_device_usbh(struct at91_usbh_data *data)
@ -121,6 +121,19 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
static u64 eth_dmamask = 0xffffffffUL;
static struct at91_eth_data eth_data;
static struct resource at91_eth_resources[] = {
[0] = {
.start = AT91_BASE_EMAC,
.end = AT91_BASE_EMAC + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91_ID_EMAC,
.end = AT91_ID_EMAC,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91rm9200_eth_device = {
.name = "at91_ether",
.id = -1,
@ -129,7 +142,8 @@ static struct platform_device at91rm9200_eth_device = {
.coherent_dma_mask = 0xffffffff,
.platform_data = &eth_data,
},
.num_resources = 0,
.resource = at91_eth_resources,
.num_resources = ARRAY_SIZE(at91_eth_resources),
};
void __init at91_add_device_eth(struct at91_eth_data *data)
@ -224,15 +238,20 @@ static u64 mmc_dmamask = 0xffffffffUL;
static struct at91_mmc_data mmc_data;
static struct resource at91_mmc_resources[] = {
{
[0] = {
.start = AT91_BASE_MCI,
.end = AT91_BASE_MCI + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}
},
[1] = {
.start = AT91_ID_MCI,
.end = AT91_ID_MCI,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91rm9200_mmc_device = {
.name = "at91rm9200_mci",
.name = "at91_mci",
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
@ -290,4 +309,123 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data)
void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
#endif
/* --------------------------------------------------------------------
* NAND / SmartMedia
* -------------------------------------------------------------------- */
#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
static struct at91_nand_data nand_data;
static struct resource at91_nand_resources[] = {
{
.start = AT91_SMARTMEDIA_BASE,
.end = AT91_SMARTMEDIA_BASE + SZ_8M - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device at91_nand_device = {
.name = "at91_nand",
.id = -1,
.dev = {
.platform_data = &nand_data,
},
.resource = at91_nand_resources,
.num_resources = ARRAY_SIZE(at91_nand_resources),
};
void __init at91_add_device_nand(struct at91_nand_data *data)
{
if (!data)
return;
/* enable pin */
if (data->enable_pin)
at91_set_gpio_output(data->enable_pin, 1);
/* ready/busy pin */
if (data->rdy_pin)
at91_set_gpio_input(data->rdy_pin, 1);
/* card detect pin */
if (data->det_pin)
at91_set_gpio_input(data->det_pin, 1);
at91_set_A_periph(AT91_PIN_PC1, 0); /* SMOE */
at91_set_A_periph(AT91_PIN_PC3, 0); /* SMWE */
nand_data = *data;
platform_device_register(&at91_nand_device);
}
#else
void __init at91_add_device_nand(struct at91_nand_data *data) {}
#endif
/* --------------------------------------------------------------------
* TWI (i2c)
* -------------------------------------------------------------------- */
#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
static struct platform_device at91rm9200_twi_device = {
.name = "at91_i2c",
.id = -1,
.num_resources = 0,
};
void __init at91_add_device_i2c(void)
{
/* pins used for TWI interface */
at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */
at91_set_multi_drive(AT91_PIN_PA25, 1);
at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */
at91_set_multi_drive(AT91_PIN_PA26, 1);
platform_device_register(&at91rm9200_twi_device);
}
#else
void __init at91_add_device_i2c(void) {}
#endif
/* --------------------------------------------------------------------
* RTC
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91_RTC) || defined(CONFIG_AT91_RTC_MODULE)
static struct platform_device at91rm9200_rtc_device = {
.name = "at91_rtc",
.id = -1,
.num_resources = 0,
};
void __init at91_add_device_rtc(void)
{
platform_device_register(&at91rm9200_rtc_device);
}
#else
void __init at91_add_device_rtc(void) {}
#endif
/* --------------------------------------------------------------------
* LEDs
* -------------------------------------------------------------------- */
#if defined(CONFIG_LEDS)
u8 at91_leds_cpu;
u8 at91_leds_timer;
void __init at91_init_leds(u8 cpu_led, u8 timer_led)
{
at91_leds_cpu = cpu_led;
at91_leds_timer = timer_led;
}
#else
void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
#endif
/* -------------------------------------------------------------------- */

100
arch/arm/mach-at91rm9200/leds.c Normal file
View File

@ -0,0 +1,100 @@
/*
* LED driver for Atmel AT91-based boards.
*
* Copyright (C) SAN People (Pty) Ltd
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <asm/mach-types.h>
#include <asm/leds.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
static inline void at91_led_on(unsigned int led)
{
at91_set_gpio_value(led, 0);
}
static inline void at91_led_off(unsigned int led)
{
at91_set_gpio_value(led, 1);
}
static inline void at91_led_toggle(unsigned int led)
{
unsigned long is_off = at91_get_gpio_value(led);
if (is_off)
at91_led_on(led);
else
at91_led_off(led);
}
/*
* Handle LED events.
*/
static void at91_leds_event(led_event_t evt)
{
unsigned long flags;
local_irq_save(flags);
switch(evt) {
case led_start: /* System startup */
at91_led_on(at91_leds_cpu);
break;
case led_stop: /* System stop / suspend */
at91_led_off(at91_leds_cpu);
break;
#ifdef CONFIG_LEDS_TIMER
case led_timer: /* Every 50 timer ticks */
at91_led_toggle(at91_leds_timer);
break;
#endif
#ifdef CONFIG_LEDS_CPU
case led_idle_start: /* Entering idle state */
at91_led_off(at91_leds_cpu);
break;
case led_idle_end: /* Exit idle state */
at91_led_on(at91_leds_cpu);
break;
#endif
default:
break;
}
local_irq_restore(flags);
}
static int __init leds_init(void)
{
if (!at91_leds_timer || !at91_leds_cpu)
return -ENODEV;
/* Enable PIO to access the LEDs */
at91_set_gpio_output(at91_leds_timer, 1);
at91_set_gpio_output(at91_leds_cpu, 1);
leds_event = at91_leds_event;
leds_event(led_start);
return 0;
}
__initcall(leds_init);

10
arch/arm/mach-ep93xx/core.c
View File

@ -424,6 +424,14 @@ static struct amba_device uart3_device = {
.periphid = 0x00041010,
};
static struct platform_device ep93xx_rtc_device = {
.name = "ep93xx-rtc",
.id = -1,
.num_resources = 0,
};
void __init ep93xx_init_devices(void)
{
unsigned int v;
@ -439,4 +447,6 @@ void __init ep93xx_init_devices(void)
amba_device_register(&uart1_device, &iomem_resource);
amba_device_register(&uart2_device, &iomem_resource);
amba_device_register(&uart3_device, &iomem_resource);
platform_device_register(&ep93xx_rtc_device);
}

39
arch/arm/mach-ep93xx/ts72xx.c
View File

@ -17,6 +17,8 @@
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/m48t86.h>
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
@ -39,6 +41,16 @@ static struct map_desc ts72xx_io_desc[] __initdata = {
.pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE),
.length = TS72XX_OPTIONS2_SIZE,
.type = MT_DEVICE,
}, {
.virtual = TS72XX_RTC_INDEX_VIRT_BASE,
.pfn = __phys_to_pfn(TS72XX_RTC_INDEX_PHYS_BASE),
.length = TS72XX_RTC_INDEX_SIZE,
.type = MT_DEVICE,
}, {
.virtual = TS72XX_RTC_DATA_VIRT_BASE,
.pfn = __phys_to_pfn(TS72XX_RTC_DATA_PHYS_BASE),
.length = TS72XX_RTC_DATA_SIZE,
.type = MT_DEVICE,
}
};
@ -99,11 +111,38 @@ static void __init ts72xx_map_io(void)
}
}
static unsigned char ts72xx_rtc_readb(unsigned long addr)
{
__raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE);
return __raw_readb(TS72XX_RTC_DATA_VIRT_BASE);
}
static void ts72xx_rtc_writeb(unsigned char value, unsigned long addr)
{
__raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE);
__raw_writeb(value, TS72XX_RTC_DATA_VIRT_BASE);
}
static struct m48t86_ops ts72xx_rtc_ops = {
.readb = ts72xx_rtc_readb,
.writeb = ts72xx_rtc_writeb,
};
static struct platform_device ts72xx_rtc_device = {
.name = "rtc-m48t86",
.id = -1,
.dev = {
.platform_data = &ts72xx_rtc_ops,
},
.num_resources = 0,
};
static void __init ts72xx_init_machine(void)
{
ep93xx_init_devices();
if (board_is_ts7200())
physmap_configure(TS72XX_NOR_PHYS_BASE, 0x01000000, 1, NULL);
platform_device_register(&ts72xx_rtc_device);
}
MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")

521
arch/arm/mach-imx/dma.c
View File

@ -7,11 +7,18 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* 03/03/2004 Sascha Hauer <sascha@saschahauer.de>
* 2004-03-03 Sascha Hauer <sascha@saschahauer.de>
* initial version heavily inspired by
* linux/arch/arm/mach-pxa/dma.c
*
* 2005-04-17 Pavel Pisa <pisa@cmp.felk.cvut.cz>
* Changed to support scatter gather DMA
* by taking Russell's code from RiscPC
*
*/
#undef DEBUG
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
@ -22,69 +29,368 @@
#include <asm/irq.h>
#include <asm/hardware.h>
#include <asm/dma.h>
#include <asm/arch/imx-dma.h>
static struct dma_channel {
char *name;
void (*irq_handler) (int, void *, struct pt_regs *);
void (*err_handler) (int, void *, struct pt_regs *);
void *data;
} dma_channels[11];
struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
/* set err_handler to NULL to have the standard info-only error handler */
int
imx_request_dma(char *name, imx_dma_prio prio,
void (*irq_handler) (int, void *, struct pt_regs *),
void (*err_handler) (int, void *, struct pt_regs *), void *data)
/*
* imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
* @dma_ch: i.MX DMA channel number
* @lastcount: number of bytes transferred during last transfer
*
* Functions prepares DMA controller for next sg data chunk transfer.
* The @lastcount argument informs function about number of bytes transferred
* during last block. Zero value can be used for @lastcount to setup DMA
* for the first chunk.
*/
static inline int imx_dma_sg_next(imx_dmach_t dma_ch, unsigned int lastcount)
{
unsigned long flags;
int i, found = 0;
struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
unsigned int nextcount;
unsigned int nextaddr;
/* basic sanity checks */
if (!name || !irq_handler)
return -EINVAL;
if (!imxdma->name) {
printk(KERN_CRIT "%s: called for not allocated channel %d\n",
__FUNCTION__, dma_ch);
return 0;
}
local_irq_save(flags);
imxdma->resbytes -= lastcount;
/* try grabbing a DMA channel with the requested priority */
for (i = prio; i < prio + (prio == DMA_PRIO_LOW) ? 8 : 4; i++) {
if (!dma_channels[i].name) {
found = 1;
break;
if (!imxdma->sg) {
pr_debug("imxdma%d: no sg data\n", dma_ch);
return 0;
}
imxdma->sgbc += lastcount;
if ((imxdma->sgbc >= imxdma->sg->length) || !imxdma->resbytes) {
if ((imxdma->sgcount <= 1) || !imxdma->resbytes) {
pr_debug("imxdma%d: sg transfer limit reached\n",
dma_ch);
imxdma->sgcount=0;
imxdma->sg = NULL;
return 0;
} else {
imxdma->sgcount--;
imxdma->sg++;
imxdma->sgbc = 0;
}
}
nextcount = imxdma->sg->length - imxdma->sgbc;
nextaddr = imxdma->sg->dma_address + imxdma->sgbc;
if (!found) {
/* requested prio group is full, try hier priorities */
for (i = prio - 1; i >= 0; i--) {
if (!dma_channels[i].name) {
found = 1;
break;
}
}
}
if(imxdma->resbytes < nextcount)
nextcount = imxdma->resbytes;
if (found) {
DIMR &= ~(1 << i);
dma_channels[i].name = name;
dma_channels[i].irq_handler = irq_handler;
dma_channels[i].err_handler = err_handler;
dma_channels[i].data = data;
} else {
printk(KERN_WARNING "No more available DMA channels for %s\n",
name);
i = -ENODEV;
}
if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
DAR(dma_ch) = nextaddr;
else
SAR(dma_ch) = nextaddr;
local_irq_restore(flags);
return i;
CNTR(dma_ch) = nextcount;
pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, size 0x%08x\n",
dma_ch, DAR(dma_ch), SAR(dma_ch), CNTR(dma_ch));
return nextcount;
}
void
imx_free_dma(int dma_ch)
/*
* imx_dma_setup_sg_base - scatter-gather DMA emulation
* @dma_ch: i.MX DMA channel number
* @sg: pointer to the scatter-gather list/vector
* @sgcount: scatter-gather list hungs count
*
* Functions sets up i.MX DMA state for emulated scatter-gather transfer
* and sets up channel registers to be ready for the first chunk
*/
static int
imx_dma_setup_sg_base(imx_dmach_t dma_ch,
struct scatterlist *sg, unsigned int sgcount)
{
struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
imxdma->sg = sg;
imxdma->sgcount = sgcount;
imxdma->sgbc = 0;
return imx_dma_sg_next(dma_ch, 0);
}
/**
* imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from device transfer
* @dma_ch: i.MX DMA channel number
* @dma_address: the DMA/physical memory address of the linear data block
* to transfer
* @dma_length: length of the data block in bytes
* @dev_addr: physical device port address
* @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
* or %DMA_MODE_WRITE from memory to the device
*
* The function setups DMA channel source and destination addresses for transfer
* specified by provided parameters. The scatter-gather emulation is disabled,
* because linear data block
* form the physical address range is transfered.
* Return value: if incorrect parameters are provided -%EINVAL.
* Zero indicates success.
*/
int
imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
unsigned int dma_length, unsigned int dev_addr,
dmamode_t dmamode)
{
struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
imxdma->sg = NULL;
imxdma->sgcount = 0;
imxdma->dma_mode = dmamode;
imxdma->resbytes = dma_length;
if (!dma_address) {
printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n",
dma_ch);
return -EINVAL;
}
if (!dma_length) {
printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n",
dma_ch);
return -EINVAL;
}
if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for read\n",
dma_ch, (unsigned int)dma_address, dma_length,
dev_addr);
SAR(dma_ch) = dev_addr;
DAR(dma_ch) = (unsigned int)dma_address;
} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for write\n",
dma_ch, (unsigned int)dma_address, dma_length,
dev_addr);
SAR(dma_ch) = (unsigned int)dma_address;
DAR(dma_ch) = dev_addr;
} else {
printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
dma_ch);
return -EINVAL;
}
CNTR(dma_ch) = dma_length;
return 0;
}
/**
* imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer
* @dma_ch: i.MX DMA channel number
* @sg: pointer to the scatter-gather list/vector
* @sgcount: scatter-gather list hungs count
* @dma_length: total length of the transfer request in bytes
* @dev_addr: physical device port address
* @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
* or %DMA_MODE_WRITE from memory to the device
*
* The function setups DMA channel state and registers to be ready for transfer
* specified by provided parameters. The scatter-gather emulation is set up
* according to the parameters.
*
* The full preparation of the transfer requires setup of more register
* by the caller before imx_dma_enable() can be called.
*
* %BLR(dma_ch) holds transfer burst length in bytes, 0 means 64 bytes
*
* %RSSR(dma_ch) has to be set to the DMA request line source %DMA_REQ_xxx
*
* %CCR(dma_ch) has to specify transfer parameters, the next settings is typical
* for linear or simple scatter-gather transfers if %DMA_MODE_READ is specified
*
* %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x
*
* The typical setup for %DMA_MODE_WRITE is specified by next options combination
*
* %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x
*
* Be carefull there and do not mistakenly mix source and target device
* port sizes constants, they are really different:
* %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32,
* %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32
*
* Return value: if incorrect parameters are provided -%EINVAL.
* Zero indicates success.
*/
int
imx_dma_setup_sg(imx_dmach_t dma_ch,
struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
unsigned int dev_addr, dmamode_t dmamode)
{
int res;
struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
imxdma->sg = NULL;
imxdma->sgcount = 0;
imxdma->dma_mode = dmamode;
imxdma->resbytes = dma_length;
if (!sg || !sgcount) {
printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
dma_ch);
return -EINVAL;
}
if (!sg->length) {
printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n",
dma_ch);
return -EINVAL;
}
if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for read\n",
dma_ch, sg, sgcount, dma_length, dev_addr);
SAR(dma_ch) = dev_addr;
} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for write\n",
dma_ch, sg, sgcount, dma_length, dev_addr);
DAR(dma_ch) = dev_addr;
} else {
printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
dma_ch);
return -EINVAL;
}
res = imx_dma_setup_sg_base(dma_ch, sg, sgcount);
if (res <= 0) {
printk(KERN_ERR "imxdma%d: no sg chunk ready\n", dma_ch);
return -EINVAL;
}
return 0;
}
/**
* imx_dma_setup_handlers - setup i.MX DMA channel end and error notification handlers
* @dma_ch: i.MX DMA channel number
* @irq_handler: the pointer to the function called if the transfer
* ends successfully
* @err_handler: the pointer to the function called if the premature
* end caused by error occurs
* @data: user specified value to be passed to the handlers
*/
int
imx_dma_setup_handlers(imx_dmach_t dma_ch,
void (*irq_handler) (int, void *, struct pt_regs *),
void (*err_handler) (int, void *, struct pt_regs *),
void *data)
{
struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
unsigned long flags;
if (!imxdma->name) {
printk(KERN_CRIT "%s: called for not allocated channel %d\n",
__FUNCTION__, dma_ch);
return -ENODEV;
}
local_irq_save(flags);
DISR = (1 << dma_ch);
imxdma->irq_handler = irq_handler;
imxdma->err_handler = err_handler;
imxdma->data = data;
local_irq_restore(flags);
return 0;
}
/**
* imx_dma_enable - function to start i.MX DMA channel operation
* @dma_ch: i.MX DMA channel number
*
* The channel has to be allocated by driver through imx_dma_request()
* or imx_dma_request_by_prio() function.
* The transfer parameters has to be set to the channel registers through
* call of the imx_dma_setup_single() or imx_dma_setup_sg() function
* and registers %BLR(dma_ch), %RSSR(dma_ch) and %CCR(dma_ch) has to
* be set prior this function call by the channel user.
*/
void imx_dma_enable(imx_dmach_t dma_ch)
{
struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
unsigned long flags;
pr_debug("imxdma%d: imx_dma_enable\n", dma_ch);
if (!imxdma->name) {
printk(KERN_CRIT "%s: called for not allocated channel %d\n",
__FUNCTION__, dma_ch);
return;
}
local_irq_save(flags);
DISR = (1 << dma_ch);
DIMR &= ~(1 << dma_ch);
CCR(dma_ch) |= CCR_CEN;
local_irq_restore(flags);
}
/**
* imx_dma_disable - stop, finish i.MX DMA channel operatin
* @dma_ch: i.MX DMA channel number
*/
void imx_dma_disable(imx_dmach_t dma_ch)
{
unsigned long flags;
if (!dma_channels[dma_ch].name) {
pr_debug("imxdma%d: imx_dma_disable\n", dma_ch);
local_irq_save(flags);
DIMR |= (1 << dma_ch);
CCR(dma_ch) &= ~CCR_CEN;
DISR = (1 << dma_ch);
local_irq_restore(flags);
}
/**
* imx_dma_request - request/allocate specified channel number
* @dma_ch: i.MX DMA channel number
* @name: the driver/caller own non-%NULL identification
*/
int imx_dma_request(imx_dmach_t dma_ch, const char *name)
{
struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
unsigned long flags;
/* basic sanity checks */
if (!name)
return -EINVAL;
if (dma_ch >= IMX_DMA_CHANNELS) {
printk(KERN_CRIT "%s: called for non-existed channel %d\n",
__FUNCTION__, dma_ch);
return -EINVAL;
}
local_irq_save(flags);
if (imxdma->name) {
local_irq_restore(flags);
return -ENODEV;
}
imxdma->name = name;
imxdma->irq_handler = NULL;
imxdma->err_handler = NULL;
imxdma->data = NULL;
imxdma->sg = NULL;
local_irq_restore(flags);
return 0;
}
/**
* imx_dma_free - release previously acquired channel
* @dma_ch: i.MX DMA channel number
*/
void imx_dma_free(imx_dmach_t dma_ch)
{
unsigned long flags;
struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
if (!imxdma->name) {
printk(KERN_CRIT
"%s: trying to free channel %d which is already freed\n",
__FUNCTION__, dma_ch);
@ -92,27 +398,84 @@ imx_free_dma(int dma_ch)
}
local_irq_save(flags);
DIMR &= ~(1 << dma_ch);
dma_channels[dma_ch].name = NULL;
/* Disable interrupts */
DIMR |= (1 << dma_ch);
CCR(dma_ch) &= ~CCR_CEN;
imxdma->name = NULL;
local_irq_restore(flags);
}
static irqreturn_t
dma_err_handler(int irq, void *dev_id, struct pt_regs *regs)
/**
* imx_dma_request_by_prio - find and request some of free channels best suiting requested priority
* @dma_ch: i.MX DMA channel number
* @name: the driver/caller own non-%NULL identification
* @prio: one of the hardware distinguished priority level:
* %DMA_PRIO_HIGH, %DMA_PRIO_MEDIUM, %DMA_PRIO_LOW
*
* This function tries to find free channel in the specified priority group
* if the priority cannot be achieved it tries to look for free channel
* in the higher and then even lower priority groups.
*
* Return value: If there is no free channel to allocate, -%ENODEV is returned.
* Zero value indicates successful channel allocation.
*/
int
imx_dma_request_by_prio(imx_dmach_t * pdma_ch, const char *name,
imx_dma_prio prio)
{
int i;
int best;
switch (prio) {
case (DMA_PRIO_HIGH):
best = 8;
break;
case (DMA_PRIO_MEDIUM):
best = 4;
break;
case (DMA_PRIO_LOW):
default:
best = 0;
break;
}
for (i = best; i < IMX_DMA_CHANNELS; i++) {
if (!imx_dma_request(i, name)) {
*pdma_ch = i;
return 0;
}
}
for (i = best - 1; i >= 0; i--) {
if (!imx_dma_request(i, name)) {
*pdma_ch = i;
return 0;
}
}
printk(KERN_ERR "%s: no free DMA channel found\n", __FUNCTION__);
return -ENODEV;
}
static irqreturn_t dma_err_handler(int irq, void *dev_id, struct pt_regs *regs)
{
int i, disr = DISR;
struct dma_channel *channel;
struct imx_dma_channel *channel;
unsigned int err_mask = DBTOSR | DRTOSR | DSESR | DBOSR;
DISR = disr;
for (i = 0; i < 11; i++) {
channel = &dma_channels[i];
for (i = 0; i < IMX_DMA_CHANNELS; i++) {
channel = &imx_dma_channels[i];
if ( (err_mask & 1<<i) && channel->name && channel->err_handler) {
if ((err_mask & 1 << i) && channel->name
&& channel->err_handler) {
channel->err_handler(i, channel->data, regs);
continue;
}
imx_dma_channels[i].sg = NULL;
if (DBTOSR & (1 << i)) {
printk(KERN_WARNING
"Burst timeout on channel %d (%s)\n",
@ -141,17 +504,27 @@ dma_err_handler(int irq, void *dev_id, struct pt_regs *regs)
return IRQ_HANDLED;
}
static irqreturn_t
dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
static irqreturn_t dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
{
int i, disr = DISR;
pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
disr);
DISR = disr;
for (i = 0; i < 11; i++) {
for (i = 0; i < IMX_DMA_CHANNELS; i++) {
if (disr & (1 << i)) {
struct dma_channel *channel = &dma_channels[i];
if (channel->name && channel->irq_handler) {
channel->irq_handler(i, channel->data, regs);
struct imx_dma_channel *channel = &imx_dma_channels[i];
if (channel->name) {
if (imx_dma_sg_next(i, CNTR(i))) {
CCR(i) &= ~CCR_CEN;
mb();
CCR(i) |= CCR_CEN;
} else {
if (channel->irq_handler)
channel->irq_handler(i,
channel->data, regs);
}
} else {
/*
* IRQ for an unregistered DMA channel:
@ -165,10 +538,10 @@ dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
return IRQ_HANDLED;
}
static int __init
imx_dma_init(void)
static int __init imx_dma_init(void)
{
int ret;
int i;
/* reset DMA module */
DCR = DCR_DRST;
@ -189,15 +562,27 @@ imx_dma_init(void)
DCR = DCR_DEN;
/* clear all interrupts */
DISR = 0x3ff;
DISR = (1 << IMX_DMA_CHANNELS) - 1;
/* enable interrupts */
DIMR = 0;
DIMR = (1 << IMX_DMA_CHANNELS) - 1;
for (i = 0; i < IMX_DMA_CHANNELS; i++) {
imx_dma_channels[i].sg = NULL;
imx_dma_channels[i].dma_num = i;
}
return ret;
}
arch_initcall(imx_dma_init);
EXPORT_SYMBOL(imx_request_dma);
EXPORT_SYMBOL(imx_free_dma);
EXPORT_SYMBOL(imx_dma_setup_single);
EXPORT_SYMBOL(imx_dma_setup_sg);
EXPORT_SYMBOL(imx_dma_setup_handlers);
EXPORT_SYMBOL(imx_dma_enable);
EXPORT_SYMBOL(imx_dma_disable);
EXPORT_SYMBOL(imx_dma_request);
EXPORT_SYMBOL(imx_dma_free);
EXPORT_SYMBOL(imx_dma_request_by_prio);
EXPORT_SYMBOL(imx_dma_channels);

13
arch/arm/mach-imx/generic.c
View File

@ -33,6 +33,7 @@
#include <asm/arch/imx-regs.h>
#include <asm/mach/map.h>
#include <asm/arch/mmc.h>
void imx_gpio_mode(int gpio_mode)
{
@ -175,13 +176,25 @@ static struct resource imx_mmc_resources[] = {
},
};
static u64 imxmmmc_dmamask = 0xffffffffUL;
static struct platform_device imx_mmc_device = {
.name = "imx-mmc",
.id = 0,
.dev = {
.dma_mask = &imxmmmc_dmamask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(imx_mmc_resources),
.resource = imx_mmc_resources,
};
void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
{
imx_mmc_device.dev.platform_data = info;
}
EXPORT_SYMBOL(imx_set_mmc_info);
static struct resource imx_uart1_resources[] = {
[0] = {
.start = 0x00206000,

18
arch/arm/mach-imx/mx1ads.c
View File

@ -25,6 +25,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/arch/mmc.h>
#include <linux/interrupt.h>
#include "generic.h"
@ -51,11 +52,28 @@ static struct platform_device *devices[] __initdata = {
&cs89x0_device,
};
#ifdef CONFIG_MMC_IMX
static int mx1ads_mmc_card_present(void)
{
/* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */
return (SSR(1) & (1 << 20) ? 0 : 1);
}
static struct imxmmc_platform_data mx1ads_mmc_info = {
.card_present = mx1ads_mmc_card_present,
};
#endif
static void __init
mx1ads_init(void)
{
#ifdef CONFIG_LEDS
imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2);
#endif
#ifdef CONFIG_MMC_IMX
/* SD/MMC card detect */
imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
imx_set_mmc_info(&mx1ads_mmc_info);
#endif
platform_add_devices(devices, ARRAY_SIZE(devices));
}

9
arch/arm/mach-ixp23xx/espresso.c
View File

@ -44,6 +44,15 @@
#include <asm/mach/irq.h>
#include <asm/mach/pci.h>
static int __init espresso_pci_init(void)
{
if (machine_is_espresso())
ixp23xx_pci_slave_init();
return 0;
};
subsys_initcall(espresso_pci_init);
static void __init espresso_init(void)
{
physmap_configure(0x90000000, 0x02000000, 2, NULL);

18
arch/arm/mach-ixp23xx/pci.c
View File

@ -201,7 +201,7 @@ int clear_master_aborts(void)
return 0;
}
void __init ixp23xx_pci_preinit(void)
static void __init ixp23xx_pci_common_init(void)
{
#ifdef __ARMEB__
*IXP23XX_PCI_CONTROL |= 0x20000; /* set I/O swapping */
@ -219,7 +219,18 @@ void __init ixp23xx_pci_preinit(void)
*IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1);
} else {
*IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1);
/*
* Enable coherency on A2 silicon.
*/
if (arch_is_coherent())
*IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_COH_OFF;
}
}
void __init ixp23xx_pci_preinit(void)
{
ixp23xx_pci_common_init();
hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS,
"PCI config cycle to non-existent device");
@ -273,3 +284,8 @@ int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys)
return 1;
}
void ixp23xx_pci_slave_init(void)
{
ixp23xx_pci_common_init();
}

20
arch/arm/mach-omap1/Kconfig
View File

@ -69,12 +69,6 @@ config MACH_VOICEBLUE
Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
such a board.
config MACH_NETSTAR
bool "NetStar"
depends on ARCH_OMAP1 && ARCH_OMAP15XX
help
Support for NetStar PBX. Say Y here if you have such a board.
config MACH_OMAP_PALMTE
bool "Palm Tungsten E"
depends on ARCH_OMAP1 && ARCH_OMAP15XX
@ -85,6 +79,20 @@ config MACH_OMAP_PALMTE
informations.
Say Y here if you have such a PDA, say NO otherwise.
config MACH_NOKIA770
bool "Nokia 770"
depends on ARCH_OMAP1 && ARCH_OMAP16XX
help
Support for the Nokia 770 Internet Tablet. Say Y here if you
have such a device.
config MACH_AMS_DELTA
bool "Amstrad E3 (Delta)"
depends on ARCH_OMAP1 && ARCH_OMAP15XX
help
Support for the Amstrad E3 (codename Delta) videophone. Say Y here
if you have such a device.
config MACH_OMAP_GENERIC
bool "Generic OMAP board"
depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)

11
arch/arm/mach-omap1/Makefile
View File

@ -3,7 +3,13 @@
#
# Common support
obj-y := io.o id.o clock.o irq.o time.o mux.o serial.o devices.o
obj-y := io.o id.o clock.o irq.o mux.o serial.o devices.o
obj-$(CONFIG_OMAP_MPU_TIMER) += time.o
# Power Management
obj-$(CONFIG_PM) += pm.o sleep.o
led-y := leds.o
# Specific board support
@ -14,8 +20,9 @@ obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o
obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o
obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o
obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o
obj-$(CONFIG_MACH_NETSTAR) += board-netstar.o
obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o
obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o
obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o
ifeq ($(CONFIG_ARCH_OMAP15XX),y)
# Innovator-1510 FPGA

116
arch/arm/mach-omap1/board-ams-delta.c Normal file
View File

@ -0,0 +1,116 @@
/*
* linux/arch/arm/mach-omap1/board-ams-delta.c
*
* Modified from board-generic.c
*
* Board specific inits for the Amstrad E3 (codename Delta) videophone
*
* Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/arch/board-ams-delta.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mux.h>
#include <asm/arch/usb.h>
#include <asm/arch/board.h>
#include <asm/arch/common.h>
static u8 ams_delta_latch1_reg;
static u16 ams_delta_latch2_reg;
void ams_delta_latch1_write(u8 mask, u8 value)
{
ams_delta_latch1_reg &= ~mask;
ams_delta_latch1_reg |= value;
*(volatile __u8 *) AMS_DELTA_LATCH1_VIRT = ams_delta_latch1_reg;
}
void ams_delta_latch2_write(u16 mask, u16 value)
{
ams_delta_latch2_reg &= ~mask;
ams_delta_latch2_reg |= value;
*(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg;
}
static void __init ams_delta_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
}
static struct map_desc ams_delta_io_desc[] __initdata = {
// AMS_DELTA_LATCH1
{
.virtual = AMS_DELTA_LATCH1_VIRT,
.pfn = __phys_to_pfn(AMS_DELTA_LATCH1_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
},
// AMS_DELTA_LATCH2
{
.virtual = AMS_DELTA_LATCH2_VIRT,
.pfn = __phys_to_pfn(AMS_DELTA_LATCH2_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
},
// AMS_DELTA_MODEM
{
.virtual = AMS_DELTA_MODEM_VIRT,
.pfn = __phys_to_pfn(AMS_DELTA_MODEM_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
}
};
static struct omap_uart_config ams_delta_uart_config __initdata = {
.enabled_uarts = 1,
};
static struct omap_board_config_kernel ams_delta_config[] = {
{ OMAP_TAG_UART, &ams_delta_uart_config },
};
static void __init ams_delta_init(void)
{
iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
omap_board_config = ams_delta_config;
omap_board_config_size = ARRAY_SIZE(ams_delta_config);
omap_serial_init();
/* Clear latch2 (NAND, LCD, modem enable) */
ams_delta_latch2_write(~0, 0);
}
static void __init ams_delta_map_io(void)
{
omap1_map_common_io();
}
MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
/* Maintainer: Jonathan McDowell <noodles@earth.li> */
.phys_io = 0xfff00000,
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = ams_delta_map_io,
.init_irq = ams_delta_init_irq,
.init_machine = ams_delta_init,
.timer = &omap_timer,
MACHINE_END
EXPORT_SYMBOL(ams_delta_latch1_write);
EXPORT_SYMBOL(ams_delta_latch2_write);

2
arch/arm/mach-omap1/board-generic.c
View File

@ -88,7 +88,7 @@ static struct omap_board_config_kernel generic_config[] = {
static void __init omap_generic_init(void)
{
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
if (cpu_is_omap15xx()) {
generic_config[0].data = &generic1510_usb_config;
}
#endif

200
arch/arm/mach-omap1/board-h2.c
View File

@ -24,7 +24,9 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
@ -35,12 +37,55 @@
#include <asm/arch/gpio.h>
#include <asm/arch/mux.h>
#include <asm/arch/tc.h>
#include <asm/arch/irda.h>
#include <asm/arch/usb.h>
#include <asm/arch/keypad.h>
#include <asm/arch/common.h>
#include <asm/arch/mcbsp.h>
#include <asm/arch/omap-alsa.h>
extern int omap_gpio_init(void);
static struct mtd_partition h2_partitions[] = {
static int h2_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
KEY(0, 2, KEY_3),
KEY(0, 3, KEY_F10),
KEY(0, 4, KEY_F5),
KEY(0, 5, KEY_9),
KEY(1, 0, KEY_DOWN),
KEY(1, 1, KEY_UP),
KEY(1, 2, KEY_2),
KEY(1, 3, KEY_F9),
KEY(1, 4, KEY_F7),
KEY(1, 5, KEY_0),
KEY(2, 0, KEY_ENTER),
KEY(2, 1, KEY_6),
KEY(2, 2, KEY_1),
KEY(2, 3, KEY_F2),
KEY(2, 4, KEY_F6),
KEY(2, 5, KEY_HOME),
KEY(3, 0, KEY_8),
KEY(3, 1, KEY_5),
KEY(3, 2, KEY_F12),
KEY(3, 3, KEY_F3),
KEY(3, 4, KEY_F8),
KEY(3, 5, KEY_END),
KEY(4, 0, KEY_7),
KEY(4, 1, KEY_4),
KEY(4, 2, KEY_F11),
KEY(4, 3, KEY_F1),
KEY(4, 4, KEY_F4),
KEY(4, 5, KEY_ESC),
KEY(5, 0, KEY_F13),
KEY(5, 1, KEY_F14),
KEY(5, 2, KEY_F15),
KEY(5, 3, KEY_F16),
KEY(5, 4, KEY_SLEEP),
0
};
static struct mtd_partition h2_nor_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
.name = "bootloader",
@ -71,26 +116,26 @@ static struct mtd_partition h2_partitions[] = {
}
};
static struct flash_platform_data h2_flash_data = {
static struct flash_platform_data h2_nor_data = {
.map_name = "cfi_probe",
.width = 2,
.parts = h2_partitions,
.nr_parts = ARRAY_SIZE(h2_partitions),
.parts = h2_nor_partitions,
.nr_parts = ARRAY_SIZE(h2_nor_partitions),
};
static struct resource h2_flash_resource = {
static struct resource h2_nor_resource = {
/* This is on CS3, wherever it's mapped */
.flags = IORESOURCE_MEM,
};
static struct platform_device h2_flash_device = {
static struct platform_device h2_nor_device = {
.name = "omapflash",
.id = 0,
.dev = {
.platform_data = &h2_flash_data,
.platform_data = &h2_nor_data,
},
.num_resources = 1,
.resource = &h2_flash_resource,
.resource = &h2_nor_resource,
};
static struct resource h2_smc91x_resources[] = {
@ -113,9 +158,119 @@ static struct platform_device h2_smc91x_device = {
.resource = h2_smc91x_resources,
};
static struct resource h2_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
.end = INT_KEYBOARD,
.flags = IORESOURCE_IRQ,
},
};
static struct omap_kp_platform_data h2_kp_data = {
.rows = 8,
.cols = 8,
.keymap = h2_keymap,
.rep = 1,
};
static struct platform_device h2_kp_device = {
.name = "omap-keypad",
.id = -1,
.dev = {
.platform_data = &h2_kp_data,
},
.num_resources = ARRAY_SIZE(h2_kp_resources),
.resource = h2_kp_resources,
};
#define H2_IRDA_FIRSEL_GPIO_PIN 17
#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
static int h2_transceiver_mode(struct device *dev, int state)
{
if (state & IR_SIRMODE)
omap_set_gpio_dataout(H2_IRDA_FIRSEL_GPIO_PIN, 0);
else /* MIR/FIR */
omap_set_gpio_dataout(H2_IRDA_FIRSEL_GPIO_PIN, 1);
return 0;
}
#endif
static struct omap_irda_config h2_irda_data = {
.transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
.rx_channel = OMAP_DMA_UART3_RX,
.tx_channel = OMAP_DMA_UART3_TX,
.dest_start = UART3_THR,
.src_start = UART3_RHR,
.tx_trigger = 0,
.rx_trigger = 0,
};
static struct resource h2_irda_resources[] = {
[0] = {
.start = INT_UART3,
.end = INT_UART3,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device h2_irda_device = {
.name = "omapirda",
.id = 0,
.dev = {
.platform_data = &h2_irda_data,
},
.num_resources = ARRAY_SIZE(h2_irda_resources),
.resource = h2_irda_resources,
};
static struct platform_device h2_lcd_device = {
.name = "lcd_h2",
.id = -1,
};
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
.spcr1 = RINTM(3) | RRST,
.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
.srgr1 = FWID(15),
.srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
.pcr0 = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
//.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
.name = "H2 TSC2101",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, // tsc2101_configure,
.codec_set_samplerate = NULL, // tsc2101_set_samplerate,
.codec_clock_setup = NULL, // tsc2101_clock_setup,
.codec_clock_on = NULL, // tsc2101_clock_on,
.codec_clock_off = NULL, // tsc2101_clock_off,
.get_default_samplerate = NULL, // tsc2101_get_default_samplerate,
};
static struct platform_device h2_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
.id = 1,
.dev = {
.platform_data = &alsa_config,
},
};
static struct platform_device *h2_devices[] __initdata = {
&h2_flash_device,
&h2_nor_device,
&h2_smc91x_device,
&h2_irda_device,
&h2_kp_device,
&h2_lcd_device,
&h2_mcbsp1_device,
};
static void __init h2_init_smc91x(void)
@ -164,7 +319,6 @@ static struct omap_uart_config h2_uart_config __initdata = {
};
static struct omap_lcd_config h2_lcd_config __initdata = {
.panel_name = "h2",
.ctrl_name = "internal",
};
@ -177,16 +331,34 @@ static struct omap_board_config_kernel h2_config[] = {
static void __init h2_init(void)
{
/* NOTE: revC boards support NAND-boot, which can put NOR on CS2B
* and NAND (either 16bit or 8bit) on CS3.
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
* to address 0 by a dip switch), NAND on CS2B. The NAND driver will
* notice whether a NAND chip is enabled at probe time.
*
* FIXME revC boards (and H3) support NAND-boot, with a dip switch to
* put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3. Try
* detecting that in code here, to avoid probing every possible flash
* configuration...
*/
h2_flash_resource.end = h2_flash_resource.start = omap_cs3_phys();
h2_flash_resource.end += SZ_32M - 1;
h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
h2_nor_resource.end += SZ_32M - 1;
omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
/* MMC: card detect and WP */
// omap_cfg_reg(U19_ARMIO1); /* CD */
omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */
/* Irda */
#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
omap_writel(omap_readl(FUNC_MUX_CTRL_A) | 7, FUNC_MUX_CTRL_A);
if (!(omap_request_gpio(H2_IRDA_FIRSEL_GPIO_PIN))) {
omap_set_gpio_direction(H2_IRDA_FIRSEL_GPIO_PIN, 0);
h2_irda_data.transceiver_mode = h2_transceiver_mode;
}
#endif
platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
omap_board_config = h2_config;
omap_board_config_size = ARRAY_SIZE(h2_config);

277
arch/arm/mach-omap1/board-h3.c
View File

@ -21,8 +21,11 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/errno.h>
#include <linux/workqueue.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/setup.h>
#include <asm/page.h>
@ -33,15 +36,59 @@
#include <asm/mach/map.h>
#include <asm/arch/gpio.h>
#include <asm/arch/gpioexpander.h>
#include <asm/arch/irqs.h>
#include <asm/arch/mux.h>
#include <asm/arch/tc.h>
#include <asm/arch/irda.h>
#include <asm/arch/usb.h>
#include <asm/arch/keypad.h>
#include <asm/arch/dma.h>
#include <asm/arch/common.h>
extern int omap_gpio_init(void);
static struct mtd_partition h3_partitions[] = {
static int h3_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
KEY(0, 2, KEY_3),
KEY(0, 3, KEY_F10),
KEY(0, 4, KEY_F5),
KEY(0, 5, KEY_9),
KEY(1, 0, KEY_DOWN),
KEY(1, 1, KEY_UP),
KEY(1, 2, KEY_2),
KEY(1, 3, KEY_F9),
KEY(1, 4, KEY_F7),
KEY(1, 5, KEY_0),
KEY(2, 0, KEY_ENTER),
KEY(2, 1, KEY_6),
KEY(2, 2, KEY_1),
KEY(2, 3, KEY_F2),
KEY(2, 4, KEY_F6),
KEY(2, 5, KEY_HOME),
KEY(3, 0, KEY_8),
KEY(3, 1, KEY_5),
KEY(3, 2, KEY_F12),
KEY(3, 3, KEY_F3),
KEY(3, 4, KEY_F8),
KEY(3, 5, KEY_END),
KEY(4, 0, KEY_7),
KEY(4, 1, KEY_4),
KEY(4, 2, KEY_F11),
KEY(4, 3, KEY_F1),
KEY(4, 4, KEY_F4),
KEY(4, 5, KEY_ESC),
KEY(5, 0, KEY_F13),
KEY(5, 1, KEY_F14),
KEY(5, 2, KEY_F15),
KEY(5, 3, KEY_F16),
KEY(5, 4, KEY_SLEEP),
0
};
static struct mtd_partition nor_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
.name = "bootloader",
@ -72,26 +119,80 @@ static struct mtd_partition h3_partitions[] = {
}
};
static struct flash_platform_data h3_flash_data = {
static struct flash_platform_data nor_data = {
.map_name = "cfi_probe",
.width = 2,
.parts = h3_partitions,
.nr_parts = ARRAY_SIZE(h3_partitions),
.parts = nor_partitions,
.nr_parts = ARRAY_SIZE(nor_partitions),
};
static struct resource h3_flash_resource = {
static struct resource nor_resource = {
/* This is on CS3, wherever it's mapped */
.flags = IORESOURCE_MEM,
};
static struct platform_device flash_device = {
static struct platform_device nor_device = {
.name = "omapflash",
.id = 0,
.dev = {
.platform_data = &h3_flash_data,
.platform_data = &nor_data,
},
.num_resources = 1,
.resource = &h3_flash_resource,
.resource = &nor_resource,
};
static struct mtd_partition nand_partitions[] = {
#if 0
/* REVISIT: enable these partitions if you make NAND BOOT work */
{
.name = "xloader",
.offset = 0,
.size = 64 * 1024,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "bootloader",
.offset = MTDPART_OFS_APPEND,
.size = 256 * 1024,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "params",
.offset = MTDPART_OFS_APPEND,
.size = 192 * 1024,
},
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = 2 * SZ_1M,
},
#endif
{
.name = "filesystem",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
},
};
/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */
static struct nand_platform_data nand_data = {
.options = NAND_SAMSUNG_LP_OPTIONS,
.parts = nand_partitions,
.nr_parts = ARRAY_SIZE(nand_partitions),
};
static struct resource nand_resource = {
.flags = IORESOURCE_MEM,
};
static struct platform_device nand_device = {
.name = "omapnand",
.id = 0,
.dev = {
.platform_data = &nand_data,
},
.num_resources = 1,
.resource = &nand_resource,
};
static struct resource smc91x_resources[] = {
@ -138,10 +239,136 @@ static struct platform_device intlat_device = {
.resource = intlat_resources,
};
static struct resource h3_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
.end = INT_KEYBOARD,
.flags = IORESOURCE_IRQ,
},
};
static struct omap_kp_platform_data h3_kp_data = {
.rows = 8,
.cols = 8,
.keymap = h3_keymap,
.rep = 1,
};
static struct platform_device h3_kp_device = {
.name = "omap-keypad",
.id = -1,
.dev = {
.platform_data = &h3_kp_data,
},
.num_resources = ARRAY_SIZE(h3_kp_resources),
.resource = h3_kp_resources,
};
/* Select between the IrDA and aGPS module
*/
static int h3_select_irda(struct device *dev, int state)
{
unsigned char expa;
int err = 0;
if ((err = read_gpio_expa(&expa, 0x26))) {
printk(KERN_ERR "Error reading from I/O EXPANDER \n");
return err;
}
/* 'P6' enable/disable IRDA_TX and IRDA_RX */
if (state & IR_SEL) { /* IrDA */
if ((err = write_gpio_expa(expa | 0x40, 0x26))) {
printk(KERN_ERR "Error writing to I/O EXPANDER \n");
return err;
}
} else {
if ((err = write_gpio_expa(expa & ~0x40, 0x26))) {
printk(KERN_ERR "Error writing to I/O EXPANDER \n");
return err;
}
}
return err;
}
static void set_trans_mode(void *data)
{
int *mode = data;
unsigned char expa;
int err = 0;
if ((err = read_gpio_expa(&expa, 0x27)) != 0) {
printk(KERN_ERR "Error reading from I/O expander\n");
}
expa &= ~0x03;
if (*mode & IR_SIRMODE) {
expa |= 0x01;
} else { /* MIR/FIR */
expa |= 0x03;
}
if ((err = write_gpio_expa(expa, 0x27)) != 0) {
printk(KERN_ERR "Error writing to I/O expander\n");
}
}
static int h3_transceiver_mode(struct device *dev, int mode)
{
struct omap_irda_config *irda_config = dev->platform_data;
cancel_delayed_work(&irda_config->gpio_expa);
PREPARE_WORK(&irda_config->gpio_expa, set_trans_mode, &mode);
schedule_work(&irda_config->gpio_expa);
return 0;
}
static struct omap_irda_config h3_irda_data = {
.transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
.transceiver_mode = h3_transceiver_mode,
.select_irda = h3_select_irda,
.rx_channel = OMAP_DMA_UART3_RX,
.tx_channel = OMAP_DMA_UART3_TX,
.dest_start = UART3_THR,
.src_start = UART3_RHR,
.tx_trigger = 0,
.rx_trigger = 0,
};
static struct resource h3_irda_resources[] = {
[0] = {
.start = INT_UART3,
.end = INT_UART3,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device h3_irda_device = {
.name = "omapirda",
.id = 0,
.dev = {
.platform_data = &h3_irda_data,
},
.num_resources = ARRAY_SIZE(h3_irda_resources),
.resource = h3_irda_resources,
};
static struct platform_device h3_lcd_device = {
.name = "lcd_h3",
.id = -1,
};
static struct platform_device *devices[] __initdata = {
&flash_device,
&nor_device,
&nand_device,
&smc91x_device,
&intlat_device,
&h3_irda_device,
&h3_kp_device,
&h3_lcd_device,
};
static struct omap_usb_config h3_usb_config __initdata = {
@ -171,7 +398,6 @@ static struct omap_uart_config h3_uart_config __initdata = {
};
static struct omap_lcd_config h3_lcd_config __initdata = {
.panel_name = "h3",
.ctrl_name = "internal",
};
@ -182,11 +408,36 @@ static struct omap_board_config_kernel h3_config[] = {
{ OMAP_TAG_LCD, &h3_lcd_config },
};
#define H3_NAND_RB_GPIO_PIN 10
static int nand_dev_ready(struct nand_platform_data *data)
{
return omap_get_gpio_datain(H3_NAND_RB_GPIO_PIN);
}
static void __init h3_init(void)
{
h3_flash_resource.end = h3_flash_resource.start = omap_cs3_phys();
h3_flash_resource.end += OMAP_CS3_SIZE - 1;
(void) platform_add_devices(devices, ARRAY_SIZE(devices));
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
* to address 0 by a dip switch), NAND on CS2B. The NAND driver will
* notice whether a NAND chip is enabled at probe time.
*
* H3 support NAND-boot, with a dip switch to put NOR on CS2B and NAND
* (which on H2 may be 16bit) on CS3. Try detecting that in code here,
* to avoid probing every possible flash configuration...
*/
nor_resource.end = nor_resource.start = omap_cs3_phys();
nor_resource.end += SZ_32M - 1;
nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS;
nand_resource.end += SZ_4K - 1;
if (!(omap_request_gpio(H3_NAND_RB_GPIO_PIN)))
nand_data.dev_ready = nand_dev_ready;
/* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
omap_cfg_reg(V2_1710_GPIO10);
platform_add_devices(devices, ARRAY_SIZE(devices));
omap_board_config = h3_config;
omap_board_config_size = ARRAY_SIZE(h3_config);
omap_serial_init();

56
arch/arm/mach-omap1/board-innovator.c
View File

@ -22,6 +22,7 @@
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
@ -34,8 +35,22 @@
#include <asm/arch/gpio.h>
#include <asm/arch/tc.h>
#include <asm/arch/usb.h>
#include <asm/arch/keypad.h>
#include <asm/arch/common.h>
static int innovator_keymap[] = {
KEY(0, 0, KEY_F1),
KEY(0, 3, KEY_DOWN),
KEY(1, 1, KEY_F2),
KEY(1, 2, KEY_RIGHT),
KEY(2, 0, KEY_F3),
KEY(2, 1, KEY_F4),
KEY(2, 2, KEY_UP),
KEY(3, 2, KEY_ENTER),
KEY(3, 3, KEY_LEFT),
0
};
static struct mtd_partition innovator_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
@ -97,6 +112,31 @@ static struct platform_device innovator_flash_device = {
.resource = &innovator_flash_resource,
};
static struct resource innovator_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
.end = INT_KEYBOARD,
.flags = IORESOURCE_IRQ,
},
};
static struct omap_kp_platform_data innovator_kp_data = {
.rows = 8,
.cols = 8,
.keymap = innovator_keymap,
};
static struct platform_device innovator_kp_device = {
.name = "omap-keypad",
.id = -1,
.dev = {
.platform_data = &innovator_kp_data,
},
.num_resources = ARRAY_SIZE(innovator_kp_resources),
.resource = innovator_kp_resources,
};
#ifdef CONFIG_ARCH_OMAP15XX
/* Only FPGA needs to be mapped here. All others are done with ioremap */
@ -129,9 +169,16 @@ static struct platform_device innovator1510_smc91x_device = {
.resource = innovator1510_smc91x_resources,
};
static struct platform_device innovator1510_lcd_device = {
.name = "lcd_inn1510",
.id = -1,
};
static struct platform_device *innovator1510_devices[] __initdata = {
&innovator_flash_device,
&innovator1510_smc91x_device,
&innovator_kp_device,
&innovator1510_lcd_device,
};
#endif /* CONFIG_ARCH_OMAP15XX */
@ -158,9 +205,16 @@ static struct platform_device innovator1610_smc91x_device = {
.resource = innovator1610_smc91x_resources,
};
static struct platform_device innovator1610_lcd_device = {
.name = "inn1610_lcd",
.id = -1,
};
static struct platform_device *innovator1610_devices[] __initdata = {
&innovator_flash_device,
&innovator1610_smc91x_device,
&innovator_kp_device,
&innovator1610_lcd_device,
};
#endif /* CONFIG_ARCH_OMAP16XX */
@ -206,7 +260,6 @@ static struct omap_usb_config innovator1510_usb_config __initdata = {
};
static struct omap_lcd_config innovator1510_lcd_config __initdata = {
.panel_name = "inn1510",
.ctrl_name = "internal",
};
#endif
@ -228,7 +281,6 @@ static struct omap_usb_config h2_usb_config __initdata = {
};
static struct omap_lcd_config innovator1610_lcd_config __initdata = {
.panel_name = "inn1610",
.ctrl_name = "internal",
};
#endif

160
arch/arm/mach-omap1/board-netstar.c
View File

@ -1,160 +0,0 @@
/*
* Modified from board-generic.c
*
* Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
*
* Code for Netstar OMAP board.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mux.h>
#include <asm/arch/usb.h>
#include <asm/arch/common.h>
extern void __init omap_init_time(void);
extern int omap_gpio_init(void);
static struct resource netstar_smc91x_resources[] = {
[0] = {
.start = OMAP_CS1_PHYS + 0x300,
.end = OMAP_CS1_PHYS + 0x300 + 16,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(8),
.end = OMAP_GPIO_IRQ(8),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device netstar_smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(netstar_smc91x_resources),
.resource = netstar_smc91x_resources,
};
static struct platform_device *netstar_devices[] __initdata = {
&netstar_smc91x_device,
};
static struct omap_uart_config netstar_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel netstar_config[] = {
{ OMAP_TAG_UART, &netstar_uart_config },
};
static void __init netstar_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
}
static void __init netstar_init(void)
{
/* green LED */
omap_request_gpio(4);
omap_set_gpio_direction(4, 0);
/* smc91x reset */
omap_request_gpio(7);
omap_set_gpio_direction(7, 0);
omap_set_gpio_dataout(7, 1);
udelay(2); /* wait at least 100ns */
omap_set_gpio_dataout(7, 0);
mdelay(50); /* 50ms until PHY ready */
/* smc91x interrupt pin */
omap_request_gpio(8);
omap_request_gpio(12);
omap_request_gpio(13);
omap_request_gpio(14);
omap_request_gpio(15);
set_irq_type(OMAP_GPIO_IRQ(12), IRQT_FALLING);
set_irq_type(OMAP_GPIO_IRQ(13), IRQT_FALLING);
set_irq_type(OMAP_GPIO_IRQ(14), IRQT_FALLING);
set_irq_type(OMAP_GPIO_IRQ(15), IRQT_FALLING);
platform_add_devices(netstar_devices, ARRAY_SIZE(netstar_devices));
/* Switch on green LED */
omap_set_gpio_dataout(4, 0);
/* Switch off red LED */
omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */
omap_writeb(0x80, OMAP_LPG1_LCR);
omap_board_config = netstar_config;
omap_board_config_size = ARRAY_SIZE(netstar_config);
omap_serial_init();
}
static void __init netstar_map_io(void)
{
omap1_map_common_io();
}
#define MACHINE_PANICED 1
#define MACHINE_REBOOTING 2
#define MACHINE_REBOOT 4
static unsigned long machine_state;
static int panic_event(struct notifier_block *this, unsigned long event,
void *ptr)
{
if (test_and_set_bit(MACHINE_PANICED, &machine_state))
return NOTIFY_DONE;
/* Switch off green LED */
omap_set_gpio_dataout(4, 1);
/* Flash red LED */
omap_writeb(0x78, OMAP_LPG1_LCR);
omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */
return NOTIFY_DONE;
}
static struct notifier_block panic_block = {
.notifier_call = panic_event,
};
static int __init netstar_late_init(void)
{
/* TODO: Setup front panel switch here */
/* Setup panic notifier */
atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
return 0;
}
postcore_initcall(netstar_late_init);
MACHINE_START(NETSTAR, "NetStar OMAP5910")
/* Maintainer: Ladislav Michl <michl@2n.cz> */
.phys_io = 0xfff00000,
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = netstar_map_io,
.init_irq = netstar_init_irq,
.init_machine = netstar_init,
.timer = &omap_timer,
MACHINE_END

268
arch/arm/mach-omap1/board-nokia770.c Normal file
View File

@ -0,0 +1,268 @@
/*
* linux/arch/arm/mach-omap1/board-nokia770.c
*
* Modified from board-generic.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/clk.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mux.h>
#include <asm/arch/usb.h>
#include <asm/arch/board.h>
#include <asm/arch/keypad.h>
#include <asm/arch/common.h>
#include <asm/arch/dsp_common.h>
#include <asm/arch/aic23.h>
#include <asm/arch/gpio.h>
static void __init omap_nokia770_init_irq(void)
{
/* On Nokia 770, the SleepX signal is masked with an
* MPUIO line by default. It has to be unmasked for it
* to become functional */
/* SleepX mask direction */
omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008);
/* Unmask SleepX signal */
omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
omap1_init_common_hw();
omap_init_irq();
}
static int nokia770_keymap[] = {
KEY(0, 1, GROUP_0 | KEY_UP),
KEY(0, 2, GROUP_1 | KEY_F5),
KEY(1, 0, GROUP_0 | KEY_LEFT),
KEY(1, 1, GROUP_0 | KEY_ENTER),
KEY(1, 2, GROUP_0 | KEY_RIGHT),
KEY(2, 0, GROUP_1 | KEY_ESC),
KEY(2, 1, GROUP_0 | KEY_DOWN),
KEY(2, 2, GROUP_1 | KEY_F4),
KEY(3, 0, GROUP_2 | KEY_F7),
KEY(3, 1, GROUP_2 | KEY_F8),
KEY(3, 2, GROUP_2 | KEY_F6),
0
};
static struct resource nokia770_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
.end = INT_KEYBOARD,
.flags = IORESOURCE_IRQ,
},
};
static struct omap_kp_platform_data nokia770_kp_data = {
.rows = 8,
.cols = 8,
.keymap = nokia770_keymap
};
static struct platform_device nokia770_kp_device = {
.name = "omap-keypad",
.id = -1,
.dev = {
.platform_data = &nokia770_kp_data,
},
.num_resources = ARRAY_SIZE(nokia770_kp_resources),
.resource = nokia770_kp_resources,
};
static struct platform_device *nokia770_devices[] __initdata = {
&nokia770_kp_device,
};
static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = {
.x_max = 0x0fff,
.y_max = 0x0fff,
.x_plate_ohms = 180,
.pressure_max = 255,
.debounce_max = 10,
.debounce_tol = 3,
};
static struct spi_board_info nokia770_spi_board_info[] __initdata = {
[0] = {
.modalias = "lcd_lph8923",
.bus_num = 2,
.chip_select = 3,
.max_speed_hz = 12000000,
},
[1] = {
.modalias = "ads7846",
.bus_num = 2,
.chip_select = 0,
.max_speed_hz = 2500000,
.irq = OMAP_GPIO_IRQ(15),
.platform_data = &nokia770_ads7846_platform_data,
},
};
/* assume no Mini-AB port */
static struct omap_usb_config nokia770_usb_config __initdata = {
.otg = 1,
.register_host = 1,
.register_dev = 1,
.hmc_mode = 16,
.pins[0] = 6,
};
static struct omap_mmc_config nokia770_mmc_config __initdata = {
.mmc[0] = {
.enabled = 0,
.wire4 = 0,
.wp_pin = -1,
.power_pin = -1,
.switch_pin = -1,
},
.mmc[1] = {
.enabled = 0,
.wire4 = 0,
.wp_pin = -1,
.power_pin = -1,
.switch_pin = -1,
},
};
static struct omap_board_config_kernel nokia770_config[] = {
{ OMAP_TAG_USB, NULL },
{ OMAP_TAG_MMC, &nokia770_mmc_config },
};
/*
* audio power control
*/
#define HEADPHONE_GPIO 14
#define AMPLIFIER_CTRL_GPIO 58
static struct clk *dspxor_ck;
static DECLARE_MUTEX(audio_pwr_sem);
/*
* audio_pwr_state
* +--+-------------------------+---------------------------------------+
* |-1|down |power-up request -> 0 |
* +--+-------------------------+---------------------------------------+
* | 0|up |power-down(1) request -> 1 |
* | | |power-down(2) request -> (ignore) |
* +--+-------------------------+---------------------------------------+
* | 1|up, |power-up request -> 0 |
* | |received down(1) request |power-down(2) request -> -1 |
* +--+-------------------------+---------------------------------------+
*/
static int audio_pwr_state = -1;
/*
* audio_pwr_up / down should be called under audio_pwr_sem
*/
static void nokia770_audio_pwr_up(void)
{
clk_enable(dspxor_ck);
/* Turn on codec */
tlv320aic23_power_up();
if (omap_get_gpio_datain(HEADPHONE_GPIO))
/* HP not connected, turn on amplifier */
omap_set_gpio_dataout(AMPLIFIER_CTRL_GPIO, 1);
else
/* HP connected, do not turn on amplifier */
printk("HP connected\n");
}
static void codec_delayed_power_down(void *arg)
{
down(&audio_pwr_sem);
if (audio_pwr_state == -1)
tlv320aic23_power_down();
clk_disable(dspxor_ck);
up(&audio_pwr_sem);
}
static DECLARE_WORK(codec_power_down_work, codec_delayed_power_down, NULL);
static void nokia770_audio_pwr_down(void)
{
/* Turn off amplifier */
omap_set_gpio_dataout(AMPLIFIER_CTRL_GPIO, 0);
/* Turn off codec: schedule delayed work */
schedule_delayed_work(&codec_power_down_work, HZ / 20); /* 50ms */
}
void nokia770_audio_pwr_up_request(int stage)
{
down(&audio_pwr_sem);
if (audio_pwr_state == -1)
nokia770_audio_pwr_up();
/* force audio_pwr_state = 0, even if it was 1. */
audio_pwr_state = 0;
up(&audio_pwr_sem);
}
void nokia770_audio_pwr_down_request(int stage)
{
down(&audio_pwr_sem);
switch (stage) {
case 1:
if (audio_pwr_state == 0)
audio_pwr_state = 1;
break;
case 2:
if (audio_pwr_state == 1) {
nokia770_audio_pwr_down();
audio_pwr_state = -1;
}
break;
}
up(&audio_pwr_sem);
}
static void __init omap_nokia770_init(void)
{
nokia770_config[0].data = &nokia770_usb_config;
platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
spi_register_board_info(nokia770_spi_board_info,
ARRAY_SIZE(nokia770_spi_board_info));
omap_board_config = nokia770_config;
omap_board_config_size = ARRAY_SIZE(nokia770_config);
omap_serial_init();
omap_dsp_audio_pwr_up_request = nokia770_audio_pwr_up_request;
omap_dsp_audio_pwr_down_request = nokia770_audio_pwr_down_request;
dspxor_ck = clk_get(0, "dspxor_ck");
}
static void __init omap_nokia770_map_io(void)
{
omap1_map_common_io();
}
MACHINE_START(NOKIA770, "Nokia 770")
.phys_io = 0xfff00000,
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = omap_nokia770_map_io,
.init_irq = omap_nokia770_init_irq,
.init_machine = omap_nokia770_init,
.timer = &omap_timer,
MACHINE_END

95
arch/arm/mach-omap1/board-osk.c
View File

@ -33,6 +33,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
@ -44,7 +45,24 @@
#include <asm/arch/usb.h>
#include <asm/arch/mux.h>
#include <asm/arch/tc.h>
#include <asm/arch/keypad.h>
#include <asm/arch/common.h>
#include <asm/arch/mcbsp.h>
#include <asm/arch/omap-alsa.h>
static int osk_keymap[] = {
KEY(0, 0, KEY_F1),
KEY(0, 3, KEY_UP),
KEY(1, 1, KEY_LEFTCTRL),
KEY(1, 2, KEY_LEFT),
KEY(2, 0, KEY_SPACE),
KEY(2, 1, KEY_ESC),
KEY(2, 2, KEY_DOWN),
KEY(3, 2, KEY_ENTER),
KEY(3, 3, KEY_RIGHT),
0
};
static struct mtd_partition osk_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
@ -133,9 +151,69 @@ static struct platform_device osk5912_cf_device = {
.resource = osk5912_cf_resources,
};
#define DEFAULT_BITPERSAMPLE 16
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
.spcr1 = RINTM(3) | RRST,
.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
.srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
.srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
/*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
.name = "OSK AIC23",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, // aic23_configure,
.codec_set_samplerate = NULL, // aic23_set_samplerate,
.codec_clock_setup = NULL, // aic23_clock_setup,
.codec_clock_on = NULL, // aic23_clock_on,
.codec_clock_off = NULL, // aic23_clock_off,
.get_default_samplerate = NULL, // aic23_get_default_samplerate,
};
static struct platform_device osk5912_mcbsp1_device = {
.name = "omap_mcbsp",
.id = 1,
.name = "omap_alsa_mcbsp",
.id = 1,
.dev = {
.platform_data = &alsa_config,
},
};
static struct resource osk5912_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
.end = INT_KEYBOARD,
.flags = IORESOURCE_IRQ,
},
};
static struct omap_kp_platform_data osk_kp_data = {
.rows = 8,
.cols = 8,
.keymap = osk_keymap,
};
static struct platform_device osk5912_kp_device = {
.name = "omap-keypad",
.id = -1,
.dev = {
.platform_data = &osk_kp_data,
},
.num_resources = ARRAY_SIZE(osk5912_kp_resources),
.resource = osk5912_kp_resources,
};
static struct platform_device osk5912_lcd_device = {
.name = "lcd_osk",
.id = -1,
};
static struct platform_device *osk5912_devices[] __initdata = {
@ -143,6 +221,8 @@ static struct platform_device *osk5912_devices[] __initdata = {
&osk5912_smc91x_device,
&osk5912_cf_device,
&osk5912_mcbsp1_device,
&osk5912_kp_device,
&osk5912_lcd_device,
};
static void __init osk_init_smc91x(void)
@ -197,7 +277,6 @@ static struct omap_uart_config osk_uart_config __initdata = {
};
static struct omap_lcd_config osk_lcd_config __initdata = {
.panel_name = "osk",
.ctrl_name = "internal",
};
@ -255,8 +334,18 @@ static void __init osk_mistral_init(void)
static void __init osk_mistral_init(void) { }
#endif
#define EMIFS_CS3_VAL (0x88013141)
static void __init osk_init(void)
{
/* Workaround for wrong CS3 (NOR flash) timing
* There are some U-Boot versions out there which configure
* wrong CS3 memory timings. This mainly leads to CRC
* or similiar errors if you use NOR flash (e.g. with JFFS2)
*/
if (EMIFS_CCS(3) != EMIFS_CS3_VAL)
EMIFS_CCS(3) = EMIFS_CS3_VAL;
osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
osk_flash_resource.end += SZ_32M - 1;
platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));

12
arch/arm/mach-omap1/board-palmte.c
View File

@ -38,6 +38,15 @@ static void __init omap_generic_init_irq(void)
omap_init_irq();
}
static struct platform_device palmte_lcd_device = {
.name = "lcd_palmte",
.id = -1,
};
static struct platform_device *devices[] __initdata = {
&palmte_lcd_device,
};
static struct omap_usb_config palmte_usb_config __initdata = {
.register_dev = 1,
.hmc_mode = 0,
@ -55,7 +64,6 @@ static struct omap_mmc_config palmte_mmc_config __initdata = {
};
static struct omap_lcd_config palmte_lcd_config __initdata = {
.panel_name = "palmte",
.ctrl_name = "internal",
};
@ -69,6 +77,8 @@ static void __init omap_generic_init(void)
{
omap_board_config = palmte_config;
omap_board_config_size = ARRAY_SIZE(palmte_config);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static void __init omap_generic_map_io(void)

127
arch/arm/mach-omap1/board-perseus2.c
View File

@ -16,7 +16,9 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
@ -28,9 +30,44 @@
#include <asm/arch/gpio.h>
#include <asm/arch/mux.h>
#include <asm/arch/fpga.h>
#include <asm/arch/keypad.h>
#include <asm/arch/common.h>
#include <asm/arch/board.h>
static int p2_keymap[] = {
KEY(0,0,KEY_UP),
KEY(0,1,KEY_RIGHT),
KEY(0,2,KEY_LEFT),
KEY(0,3,KEY_DOWN),
KEY(0,4,KEY_CENTER),
KEY(0,5,KEY_0_5),
KEY(1,0,KEY_SOFT2),
KEY(1,1,KEY_SEND),
KEY(1,2,KEY_END),
KEY(1,3,KEY_VOLUMEDOWN),
KEY(1,4,KEY_VOLUMEUP),
KEY(1,5,KEY_RECORD),
KEY(2,0,KEY_SOFT1),
KEY(2,1,KEY_3),
KEY(2,2,KEY_6),
KEY(2,3,KEY_9),
KEY(2,4,KEY_SHARP),
KEY(2,5,KEY_2_5),
KEY(3,0,KEY_BACK),
KEY(3,1,KEY_2),
KEY(3,2,KEY_5),
KEY(3,3,KEY_8),
KEY(3,4,KEY_0),
KEY(3,5,KEY_HEADSETHOOK),
KEY(4,0,KEY_HOME),
KEY(4,1,KEY_1),
KEY(4,2,KEY_4),
KEY(4,3,KEY_7),
KEY(4,4,KEY_STAR),
KEY(4,5,KEY_POWER),
0
};
static struct resource smc91x_resources[] = {
[0] = {
.start = H2P2_DBG_FPGA_ETHR_START, /* Physical */
@ -44,7 +81,7 @@ static struct resource smc91x_resources[] = {
},
};
static struct mtd_partition p2_partitions[] = {
static struct mtd_partition nor_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
.name = "bootloader",
@ -75,27 +112,47 @@ static struct mtd_partition p2_partitions[] = {
},
};
static struct flash_platform_data p2_flash_data = {
static struct flash_platform_data nor_data = {
.map_name = "cfi_probe",
.width = 2,
.parts = p2_partitions,
.nr_parts = ARRAY_SIZE(p2_partitions),
.parts = nor_partitions,
.nr_parts = ARRAY_SIZE(nor_partitions),
};
static struct resource p2_flash_resource = {
static struct resource nor_resource = {
.start = OMAP_CS0_PHYS,
.end = OMAP_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device p2_flash_device = {
static struct platform_device nor_device = {
.name = "omapflash",
.id = 0,
.dev = {
.platform_data = &p2_flash_data,
.platform_data = &nor_data,
},
.num_resources = 1,
.resource = &p2_flash_resource,
.resource = &nor_resource,
};
static struct nand_platform_data nand_data = {
.options = NAND_SAMSUNG_LP_OPTIONS,
};
static struct resource nand_resource = {
.start = OMAP_CS3_PHYS,
.end = OMAP_CS3_PHYS + SZ_4K - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device nand_device = {
.name = "omapnand",
.id = 0,
.dev = {
.platform_data = &nand_data,
},
.num_resources = 1,
.resource = &nand_resource,
};
static struct platform_device smc91x_device = {
@ -105,17 +162,55 @@ static struct platform_device smc91x_device = {
.resource = smc91x_resources,
};
static struct platform_device *devices[] __initdata = {
&p2_flash_device,
&smc91x_device,
static struct resource kp_resources[] = {
[0] = {
.start = INT_730_MPUIO_KEYPAD,
.end = INT_730_MPUIO_KEYPAD,
.flags = IORESOURCE_IRQ,
},
};
static struct omap_kp_platform_data kp_data = {
.rows = 8,
.cols = 8,
.keymap = p2_keymap,
};
static struct platform_device kp_device = {
.name = "omap-keypad",
.id = -1,
.dev = {
.platform_data = &kp_data,
},
.num_resources = ARRAY_SIZE(kp_resources),
.resource = kp_resources,
};
static struct platform_device lcd_device = {
.name = "lcd_p2",
.id = -1,
};
static struct platform_device *devices[] __initdata = {
&nor_device,
&nand_device,
&smc91x_device,
&kp_device,
&lcd_device,
};
#define P2_NAND_RB_GPIO_PIN 62
static int nand_dev_ready(struct nand_platform_data *data)
{
return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN);
}
static struct omap_uart_config perseus2_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1)),
};
static struct omap_lcd_config perseus2_lcd_config __initdata = {
.panel_name = "p2",
.ctrl_name = "internal",
};
@ -126,7 +221,13 @@ static struct omap_board_config_kernel perseus2_config[] = {
static void __init omap_perseus2_init(void)
{
(void) platform_add_devices(devices, ARRAY_SIZE(devices));
if (!(omap_request_gpio(P2_NAND_RB_GPIO_PIN)))
nand_data.dev_ready = nand_dev_ready;
omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
platform_add_devices(devices, ARRAY_SIZE(devices));
omap_board_config = perseus2_config;
omap_board_config_size = ARRAY_SIZE(perseus2_config);

8
arch/arm/mach-omap1/board-voiceblue.c
View File

@ -155,9 +155,9 @@ static struct omap_uart_config voiceblue_uart_config __initdata = {
};
static struct omap_board_config_kernel voiceblue_config[] = {
{ OMAP_TAG_USB, &voiceblue_usb_config },
{ OMAP_TAG_MMC, &voiceblue_mmc_config },
{ OMAP_TAG_UART, &voiceblue_uart_config },
{ OMAP_TAG_USB, &voiceblue_usb_config },
{ OMAP_TAG_MMC, &voiceblue_mmc_config },
{ OMAP_TAG_UART, &voiceblue_uart_config },
};
static void __init voiceblue_init_irq(void)
@ -235,7 +235,7 @@ static struct notifier_block panic_block = {
static int __init voiceblue_setup(void)
{
/* Setup panic notifier */
atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
notifier_chain_register(&panic_notifier_list, &panic_block);
return 0;
}

9
arch/arm/mach-omap1/clock.c
View File

@ -345,7 +345,7 @@ static unsigned calc_ext_dsor(unsigned long rate)
*/
for (dsor = 2; dsor < 96; ++dsor) {
if ((dsor & 1) && dsor > 8)
continue;
continue;
if (rate >= 96000000 / dsor)
break;
}
@ -687,6 +687,11 @@ int __init omap1_clk_init(void)
clk_register(*clkp);
continue;
}
if (((*clkp)->flags &CLOCK_IN_OMAP310) && cpu_is_omap310()) {
clk_register(*clkp);
continue;
}
}
info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
@ -784,7 +789,7 @@ int __init omap1_clk_init(void)
clk_enable(&armxor_ck.clk);
clk_enable(&armtim_ck.clk); /* This should be done by timer code */
if (cpu_is_omap1510())
if (cpu_is_omap15xx())
clk_enable(&arm_gpio_ck);
return 0;

91
arch/arm/mach-omap1/clock.h
View File

@ -151,7 +151,7 @@ static struct clk ck_ref = {
.name = "ck_ref",
.rate = 12000000,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
ALWAYS_ENABLED,
CLOCK_IN_OMAP310 | ALWAYS_ENABLED,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
};
@ -160,7 +160,7 @@ static struct clk ck_dpll1 = {
.name = "ck_dpll1",
.parent = &ck_ref,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
RATE_PROPAGATES | ALWAYS_ENABLED,
CLOCK_IN_OMAP310 | RATE_PROPAGATES | ALWAYS_ENABLED,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
};
@ -183,7 +183,8 @@ static struct clk arm_ck = {
.name = "arm_ck",
.parent = &ck_dpll1,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED,
CLOCK_IN_OMAP310 | RATE_CKCTL | RATE_PROPAGATES |
ALWAYS_ENABLED,
.rate_offset = CKCTL_ARMDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.enable = &omap1_clk_enable_generic,
@ -195,7 +196,8 @@ static struct arm_idlect1_clk armper_ck = {
.name = "armper_ck",
.parent = &ck_dpll1,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
RATE_CKCTL | CLOCK_IDLE_CONTROL,
CLOCK_IN_OMAP310 | RATE_CKCTL |
CLOCK_IDLE_CONTROL,
.enable_reg = (void __iomem *)ARM_IDLECT2,
.enable_bit = EN_PERCK,
.rate_offset = CKCTL_PERDIV_OFFSET,
@ -209,7 +211,7 @@ static struct arm_idlect1_clk armper_ck = {
static struct clk arm_gpio_ck = {
.name = "arm_gpio_ck",
.parent = &ck_dpll1,
.flags = CLOCK_IN_OMAP1510,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310,
.enable_reg = (void __iomem *)ARM_IDLECT2,
.enable_bit = EN_GPIOCK,
.recalc = &followparent_recalc,
@ -222,7 +224,7 @@ static struct arm_idlect1_clk armxor_ck = {
.name = "armxor_ck",
.parent = &ck_ref,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
CLOCK_IDLE_CONTROL,
CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
.enable_reg = (void __iomem *)ARM_IDLECT2,
.enable_bit = EN_XORPCK,
.recalc = &followparent_recalc,
@ -237,7 +239,7 @@ static struct arm_idlect1_clk armtim_ck = {
.name = "armtim_ck",
.parent = &ck_ref,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
CLOCK_IDLE_CONTROL,
CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
.enable_reg = (void __iomem *)ARM_IDLECT2,
.enable_bit = EN_TIMCK,
.recalc = &followparent_recalc,
@ -252,7 +254,7 @@ static struct arm_idlect1_clk armwdt_ck = {
.name = "armwdt_ck",
.parent = &ck_ref,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
CLOCK_IDLE_CONTROL,
CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
.enable_reg = (void __iomem *)ARM_IDLECT2,
.enable_bit = EN_WDTCK,
.recalc = &omap1_watchdog_recalc,
@ -344,9 +346,9 @@ static struct arm_idlect1_clk tc_ck = {
.name = "tc_ck",
.parent = &ck_dpll1,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
CLOCK_IN_OMAP730 | RATE_CKCTL |
RATE_PROPAGATES | ALWAYS_ENABLED |
CLOCK_IDLE_CONTROL,
CLOCK_IN_OMAP730 | CLOCK_IN_OMAP310 |
RATE_CKCTL | RATE_PROPAGATES |
ALWAYS_ENABLED | CLOCK_IDLE_CONTROL,
.rate_offset = CKCTL_TCDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.enable = &omap1_clk_enable_generic,
@ -358,7 +360,8 @@ static struct arm_idlect1_clk tc_ck = {
static struct clk arminth_ck1510 = {
.name = "arminth_ck",
.parent = &tc_ck.clk,
.flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
ALWAYS_ENABLED,
.recalc = &followparent_recalc,
/* Note: On 1510 the frequency follows TC_CK
*
@ -372,7 +375,8 @@ static struct clk tipb_ck = {
/* No-idle controlled by "tc_ck" */
.name = "tibp_ck",
.parent = &tc_ck.clk,
.flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
ALWAYS_ENABLED,
.recalc = &followparent_recalc,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
@ -417,7 +421,7 @@ static struct clk dma_ck = {
.name = "dma_ck",
.parent = &tc_ck.clk,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
ALWAYS_ENABLED,
CLOCK_IN_OMAP310 | ALWAYS_ENABLED,
.recalc = &followparent_recalc,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
@ -437,7 +441,7 @@ static struct arm_idlect1_clk api_ck = {
.name = "api_ck",
.parent = &tc_ck.clk,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
CLOCK_IDLE_CONTROL,
CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
.enable_reg = (void __iomem *)ARM_IDLECT2,
.enable_bit = EN_APICK,
.recalc = &followparent_recalc,
@ -451,7 +455,8 @@ static struct arm_idlect1_clk lb_ck = {
.clk = {
.name = "lb_ck",
.parent = &tc_ck.clk,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IDLE_CONTROL,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
CLOCK_IDLE_CONTROL,
.enable_reg = (void __iomem *)ARM_IDLECT2,
.enable_bit = EN_LBCK,
.recalc = &followparent_recalc,
@ -495,8 +500,8 @@ static struct arm_idlect1_clk lcd_ck_1510 = {
.clk = {
.name = "lcd_ck",
.parent = &ck_dpll1,
.flags = CLOCK_IN_OMAP1510 | RATE_CKCTL |
CLOCK_IDLE_CONTROL,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
RATE_CKCTL | CLOCK_IDLE_CONTROL,
.enable_reg = (void __iomem *)ARM_IDLECT2,
.enable_bit = EN_LCDCK,
.rate_offset = CKCTL_LCDDIV_OFFSET,
@ -512,8 +517,9 @@ static struct clk uart1_1510 = {
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 12000000,
.flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT |
ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
ENABLE_REG_32BIT | ALWAYS_ENABLED |
CLOCK_NO_IDLE_PARENT,
.enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
.enable_bit = 29, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
@ -544,8 +550,8 @@ static struct clk uart2_ck = {
.parent = &armper_ck.clk,
.rate = 12000000,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
ENABLE_REG_32BIT | ALWAYS_ENABLED |
CLOCK_NO_IDLE_PARENT,
CLOCK_IN_OMAP310 | ENABLE_REG_32BIT |
ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
.enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
.enable_bit = 30, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
@ -559,8 +565,9 @@ static struct clk uart3_1510 = {
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 12000000,
.flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT |
ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
ENABLE_REG_32BIT | ALWAYS_ENABLED |
CLOCK_NO_IDLE_PARENT,
.enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
.enable_bit = 31, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
@ -590,7 +597,7 @@ static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */
/* Direct from ULPD, no parent */
.rate = 6000000,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
RATE_FIXED | ENABLE_REG_32BIT,
CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT,
.enable_reg = (void __iomem *)ULPD_CLOCK_CTRL,
.enable_bit = USB_MCLK_EN_BIT,
.enable = &omap1_clk_enable_generic,
@ -601,7 +608,7 @@ static struct clk usb_hhc_ck1510 = {
.name = "usb_hhc_ck",
/* Direct from ULPD, no parent */
.rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
.flags = CLOCK_IN_OMAP1510 |
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
RATE_FIXED | ENABLE_REG_32BIT,
.enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
.enable_bit = USB_HOST_HHC_UHOST_EN,
@ -637,7 +644,9 @@ static struct clk mclk_1510 = {
.name = "mclk",
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.rate = 12000000,
.flags = CLOCK_IN_OMAP1510 | RATE_FIXED,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED,
.enable_reg = (void __iomem *)SOFT_REQ_REG,
.enable_bit = 6,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
};
@ -659,7 +668,7 @@ static struct clk bclk_1510 = {
.name = "bclk",
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.rate = 12000000,
.flags = CLOCK_IN_OMAP1510 | RATE_FIXED,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
};
@ -678,12 +687,14 @@ static struct clk bclk_16xx = {
};
static struct clk mmc1_ck = {
.name = "mmc1_ck",
.name = "mmc_ck",
.id = 1,
/* Functional clock is direct from ULPD, interface clock is ARMPER */
.parent = &armper_ck.clk,
.rate = 48000000,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT |
CLOCK_NO_IDLE_PARENT,
.enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
.enable_bit = 23,
.enable = &omap1_clk_enable_generic,
@ -691,7 +702,8 @@ static struct clk mmc1_ck = {
};
static struct clk mmc2_ck = {
.name = "mmc2_ck",
.name = "mmc_ck",
.id = 2,
/* Functional clock is direct from ULPD, interface clock is ARMPER */
.parent = &armper_ck.clk,
.rate = 48000000,
@ -706,7 +718,7 @@ static struct clk mmc2_ck = {
static struct clk virtual_ck_mpu = {
.name = "mpu",
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
VIRTUAL_CLOCK | ALWAYS_ENABLED,
CLOCK_IN_OMAP310 | VIRTUAL_CLOCK | ALWAYS_ENABLED,
.parent = &arm_ck, /* Is smarter alias for */
.recalc = &followparent_recalc,
.set_rate = &omap1_select_table_rate,
@ -715,6 +727,20 @@ static struct clk virtual_ck_mpu = {
.disable = &omap1_clk_disable_generic,
};
/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
remains active during MPU idle whenever this is enabled */
static struct clk i2c_fck = {
.name = "i2c_fck",
.id = 1,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT |
ALWAYS_ENABLED,
.parent = &armxor_ck.clk,
.recalc = &followparent_recalc,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
};
static struct clk * onchip_clks[] = {
/* non-ULPD clocks */
&ck_ref,
@ -763,6 +789,7 @@ static struct clk * onchip_clks[] = {
&mmc2_ck,
/* Virtual clocks */
&virtual_ck_mpu,
&i2c_fck,
};
#endif

40
arch/arm/mach-omap1/devices.c
View File

@ -99,6 +99,45 @@ static void omap_init_rtc(void)
static inline void omap_init_rtc(void) {}
#endif
#if defined(CONFIG_OMAP_STI)
#define OMAP1_STI_BASE IO_ADDRESS(0xfffea000)
#define OMAP1_STI_CHANNEL_BASE (OMAP1_STI_BASE + 0x400)
static struct resource sti_resources[] = {
{
.start = OMAP1_STI_BASE,
.end = OMAP1_STI_BASE + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP1_STI_CHANNEL_BASE,
.end = OMAP1_STI_CHANNEL_BASE + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_1610_STI,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device sti_device = {
.name = "sti",
.id = -1,
.dev = {
.release = omap_nop_release,
},
.num_resources = ARRAY_SIZE(sti_resources),
.resource = sti_resources,
};
static inline void omap_init_sti(void)
{
platform_device_register(&sti_device);
}
#else
static inline void omap_init_sti(void) {}
#endif
/*-------------------------------------------------------------------------*/
@ -129,6 +168,7 @@ static int __init omap1_init_devices(void)
*/
omap_init_irda();
omap_init_rtc();
omap_init_sti();
return 0;
}

4
arch/arm/mach-omap1/io.c
View File

@ -18,6 +18,7 @@
#include <asm/io.h>
#include <asm/arch/mux.h>
#include <asm/arch/tc.h>
#include <asm/arch/omapfb.h>
extern int omap1_clk_init(void);
extern void omap_check_revision(void);
@ -110,7 +111,7 @@ void __init omap1_map_common_io(void)
}
#endif
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
if (cpu_is_omap15xx()) {
iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
}
#endif
@ -121,6 +122,7 @@ void __init omap1_map_common_io(void)
#endif
omap_sram_init();
omapfb_reserve_mem();
}
/*

18
arch/arm/mach-omap1/irq.c
View File

@ -60,7 +60,7 @@ struct omap_irq_bank {
unsigned long wake_enable;
};
static unsigned int irq_bank_count = 0;
static unsigned int irq_bank_count;
static struct omap_irq_bank *irq_banks;
static inline unsigned int irq_bank_readl(int bank, int offset)
@ -142,28 +142,28 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger)
#ifdef CONFIG_ARCH_OMAP730
static struct omap_irq_bank omap730_irq_banks[] = {
{ .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f },
{ .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 },
{ .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f },
{ .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 },
{ .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 },
};
#endif
#ifdef CONFIG_ARCH_OMAP15XX
static struct omap_irq_bank omap1510_irq_banks[] = {
{ .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff },
{ .base_reg = OMAP_IH2_BASE, .trigger_map = 0xffbfffed },
{ .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff },
{ .base_reg = OMAP_IH2_BASE, .trigger_map = 0xffbfffed },
};
static struct omap_irq_bank omap310_irq_banks[] = {
{ .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3faefc3 },
{ .base_reg = OMAP_IH2_BASE, .trigger_map = 0x65b3c061 },
{ .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3faefc3 },
{ .base_reg = OMAP_IH2_BASE, .trigger_map = 0x65b3c061 },
};
#endif
#if defined(CONFIG_ARCH_OMAP16XX)
static struct omap_irq_bank omap1610_irq_banks[] = {
{ .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3fefe8f },
{ .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb7c1fd },
{ .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3fefe8f },
{ .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb7c1fd },
{ .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0xffffb7ff },
{ .base_reg = OMAP_IH2_BASE + 0x200, .trigger_map = 0xffffffff },
};

30
arch/arm/mach-omap1/mux.c
View File

@ -35,16 +35,20 @@
#ifdef CONFIG_ARCH_OMAP730
struct pin_config __initdata_or_module omap730_pins[] = {
MUX_CFG_730("E2_730_KBR0", 12, 21, 0, 0, 20, 1, NA, 0, 0)
MUX_CFG_730("J7_730_KBR1", 12, 25, 0, 0, 24, 1, NA, 0, 0)
MUX_CFG_730("E1_730_KBR2", 12, 29, 0, 0, 28, 1, NA, 0, 0)
MUX_CFG_730("F3_730_KBR3", 13, 1, 0, 0, 0, 1, NA, 0, 0)
MUX_CFG_730("D2_730_KBR4", 13, 5, 0, 0, 4, 1, NA, 0, 0)
MUX_CFG_730("C2_730_KBC0", 13, 9, 0, 0, 8, 1, NA, 0, 0)
MUX_CFG_730("D3_730_KBC1", 13, 13, 0, 0, 12, 1, NA, 0, 0)
MUX_CFG_730("E4_730_KBC2", 13, 17, 0, 0, 16, 1, NA, 0, 0)
MUX_CFG_730("F4_730_KBC3", 13, 21, 0, 0, 20, 1, NA, 0, 0)
MUX_CFG_730("E3_730_KBC4", 13, 25, 0, 0, 24, 1, NA, 0, 0)
MUX_CFG_730("E2_730_KBR0", 12, 21, 0, 20, 1, 0)
MUX_CFG_730("J7_730_KBR1", 12, 25, 0, 24, 1, 0)
MUX_CFG_730("E1_730_KBR2", 12, 29, 0, 28, 1, 0)
MUX_CFG_730("F3_730_KBR3", 13, 1, 0, 0, 1, 0)
MUX_CFG_730("D2_730_KBR4", 13, 5, 0, 4, 1, 0)
MUX_CFG_730("C2_730_KBC0", 13, 9, 0, 8, 1, 0)
MUX_CFG_730("D3_730_KBC1", 13, 13, 0, 12, 1, 0)
MUX_CFG_730("E4_730_KBC2", 13, 17, 0, 16, 1, 0)
MUX_CFG_730("F4_730_KBC3", 13, 21, 0, 20, 1, 0)
MUX_CFG_730("E3_730_KBC4", 13, 25, 0, 24, 1, 0)
MUX_CFG_730("AA17_730_USB_DM", 2, 21, 0, 20, 0, 0)
MUX_CFG_730("W16_730_USB_PU_EN", 2, 25, 0, 24, 0, 0)
MUX_CFG_730("W17_730_USB_VBUSI", 2, 29, 0, 28, 0, 0)
};
#endif
@ -73,8 +77,8 @@ MUX_CFG("UART3_BCLK", A, 0, 0, 2, 6, 0, NA, 0, 0)
MUX_CFG("Y15_1610_UART3_RTS", A, 0, 1, 2, 6, 0, NA, 0, 0)
/* PWT & PWL, conflicts with UART3 */
MUX_CFG("PWT", 6, 0, 2, 0, 30, 0, NA, 0, 0)
MUX_CFG("PWL", 6, 3, 1, 0, 31, 1, NA, 0, 0)
MUX_CFG("PWT", 6, 0, 2, 0, 30, 0, NA, 0, 0)
MUX_CFG("PWL", 6, 3, 1, 0, 31, 1, NA, 0, 0)
/* USB internal master generic */
MUX_CFG("R18_USB_VBUS", 7, 9, 2, 1, 11, 0, NA, 0, 1)
@ -151,7 +155,7 @@ MUX_CFG("MCBSP3_CLKX", 9, 3, 1, 1, 29, 0, NA, 0, 1)
/* Misc ballouts */
MUX_CFG("BALLOUT_V8_ARMIO3", B, 18, 0, 2, 25, 1, NA, 0, 1)
MUX_CFG("N20_HDQ", 6, 18, 1, 1, 4, 0, 1, 4, 0)
MUX_CFG("N20_HDQ", 6, 18, 1, 1, 4, 0, 1, 4, 0)
/* OMAP-1610 MMC2 */
MUX_CFG("W8_1610_MMC2_DAT0", B, 21, 6, 2, 23, 1, 2, 1, 1)

770
arch/arm/mach-omap1/pm.c Normal file
View File

@ -0,0 +1,770 @@
/*
* linux/arch/arm/mach-omap1/pm.c
*
* OMAP Power Management Routines
*
* Original code for the SA11x0:
* Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
*
* Modified for the PXA250 by Nicolas Pitre:
* Copyright (c) 2002 Monta Vista Software, Inc.
*
* Modified for the OMAP1510 by David Singleton:
* Copyright (c) 2002 Monta Vista Software, Inc.
*
* Cleanup 2004 for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/pm.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
#include <linux/pm.h>
#include <linux/interrupt.h>
#include <linux/sysfs.h>
#include <linux/module.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
#include <asm/arch/irqs.h>
#include <asm/arch/clock.h>
#include <asm/arch/sram.h>
#include <asm/arch/tc.h>
#include <asm/arch/pm.h>
#include <asm/arch/mux.h>
#include <asm/arch/tps65010.h>
#include <asm/arch/dma.h>
#include <asm/arch/dsp_common.h>
#include <asm/arch/dmtimer.h>
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE];
static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
static unsigned short enable_dyn_sleep = 1;
static ssize_t omap_pm_sleep_while_idle_show(struct subsystem * subsys, char *buf)
{
return sprintf(buf, "%hu\n", enable_dyn_sleep);
}
static ssize_t omap_pm_sleep_while_idle_store(struct subsystem * subsys,
const char * buf,
size_t n)
{
unsigned short value;
if (sscanf(buf, "%hu", &value) != 1 ||
(value != 0 && value != 1)) {
printk(KERN_ERR "idle_sleep_store: Invalid value\n");
return -EINVAL;
}
enable_dyn_sleep = value;
return n;
}
static struct subsys_attribute sleep_while_idle_attr = {
.attr = {
.name = __stringify(sleep_while_idle),
.mode = 0644,
},
.show = omap_pm_sleep_while_idle_show,
.store = omap_pm_sleep_while_idle_store,
};
extern struct subsystem power_subsys;
static void (*omap_sram_idle)(void) = NULL;
static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
/*
* Let's power down on idle, but only if we are really
* idle, because once we start down the path of
* going idle we continue to do idle even if we get
* a clock tick interrupt . .
*/
void omap_pm_idle(void)
{
extern __u32 arm_idlect1_mask;
__u32 use_idlect1 = arm_idlect1_mask;
#ifndef CONFIG_OMAP_MPU_TIMER
int do_sleep;
#endif
local_irq_disable();
local_fiq_disable();
if (need_resched()) {
local_fiq_enable();
local_irq_enable();
return;
}
/*
* Since an interrupt may set up a timer, we don't want to
* reprogram the hardware timer with interrupts enabled.
* Re-enable interrupts only after returning from idle.
*/
timer_dyn_reprogram();
#ifdef CONFIG_OMAP_MPU_TIMER
#warning Enable 32kHz OS timer in order to allow sleep states in idle
use_idlect1 = use_idlect1 & ~(1 << 9);
#else
do_sleep = 0;
while (enable_dyn_sleep) {
#ifdef CONFIG_CBUS_TAHVO_USB
extern int vbus_active;
/* Clock requirements? */
if (vbus_active)
break;
#endif
do_sleep = 1;
break;
}
#ifdef CONFIG_OMAP_DM_TIMER
use_idlect1 = omap_dm_timer_modify_idlect_mask(use_idlect1);
#endif
if (omap_dma_running()) {
use_idlect1 &= ~(1 << 6);
if (omap_lcd_dma_ext_running())
use_idlect1 &= ~(1 << 12);
}
/* We should be able to remove the do_sleep variable and multiple
* tests above as soon as drivers, timer and DMA code have been fixed.
* Even the sleep block count should become obsolete. */
if ((use_idlect1 != ~0) || !do_sleep) {
__u32 saved_idlect1 = omap_readl(ARM_IDLECT1);
if (cpu_is_omap15xx())
use_idlect1 &= OMAP1510_BIG_SLEEP_REQUEST;
else
use_idlect1 &= OMAP1610_IDLECT1_SLEEP_VAL;
omap_writel(use_idlect1, ARM_IDLECT1);
__asm__ volatile ("mcr p15, 0, r0, c7, c0, 4");
omap_writel(saved_idlect1, ARM_IDLECT1);
local_fiq_enable();
local_irq_enable();
return;
}
omap_sram_suspend(omap_readl(ARM_IDLECT1),
omap_readl(ARM_IDLECT2));
#endif
local_fiq_enable();
local_irq_enable();
}
/*
* Configuration of the wakeup event is board specific. For the
* moment we put it into this helper function. Later it may move
* to board specific files.
*/
static void omap_pm_wakeup_setup(void)
{
u32 level1_wake = 0;
u32 level2_wake = OMAP_IRQ_BIT(INT_UART2);
/*
* Turn off all interrupts except GPIO bank 1, L1-2nd level cascade,
* and the L2 wakeup interrupts: keypad and UART2. Note that the
* drivers must still separately call omap_set_gpio_wakeup() to
* wake up to a GPIO interrupt.
*/
if (cpu_is_omap730())
level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) |
OMAP_IRQ_BIT(INT_730_IH2_IRQ);
else if (cpu_is_omap15xx())
level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
else if (cpu_is_omap16xx())
level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
OMAP_IRQ_BIT(INT_1610_IH2_IRQ);
omap_writel(~level1_wake, OMAP_IH1_MIR);
if (cpu_is_omap730()) {
omap_writel(~level2_wake, OMAP_IH2_0_MIR);
omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) |
OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)),
OMAP_IH2_1_MIR);
} else if (cpu_is_omap15xx()) {
level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
omap_writel(~level2_wake, OMAP_IH2_MIR);
} else if (cpu_is_omap16xx()) {
level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
omap_writel(~level2_wake, OMAP_IH2_0_MIR);
/* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */
omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ),
OMAP_IH2_1_MIR);
omap_writel(~0x0, OMAP_IH2_2_MIR);
omap_writel(~0x0, OMAP_IH2_3_MIR);
}
/* New IRQ agreement, recalculate in cascade order */
omap_writel(1, OMAP_IH2_CONTROL);
omap_writel(1, OMAP_IH1_CONTROL);
}
#define EN_DSPCK 13 /* ARM_CKCTL */
#define EN_APICK 6 /* ARM_IDLECT2 */
#define DSP_EN 1 /* ARM_RSTCT1 */
void omap_pm_suspend(void)
{
unsigned long arg0 = 0, arg1 = 0;
printk("PM: OMAP%x is trying to enter deep sleep...\n", system_rev);
omap_serial_wake_trigger(1);
if (machine_is_omap_osk()) {
/* Stop LED1 (D9) blink */
tps65010_set_led(LED1, OFF);
}
omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
/*
* Step 1: turn off interrupts (FIXME: NOTE: already disabled)
*/
local_irq_disable();
local_fiq_disable();
/*
* Step 2: save registers
*
* The omap is a strange/beautiful device. The caches, memory
* and register state are preserved across power saves.
* We have to save and restore very little register state to
* idle the omap.
*
* Save interrupt, MPUI, ARM and UPLD control registers.
*/
if (cpu_is_omap730()) {
MPUI730_SAVE(OMAP_IH1_MIR);
MPUI730_SAVE(OMAP_IH2_0_MIR);
MPUI730_SAVE(OMAP_IH2_1_MIR);
MPUI730_SAVE(MPUI_CTRL);
MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
MPUI730_SAVE(MPUI_DSP_API_CONFIG);
MPUI730_SAVE(EMIFS_CONFIG);
MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
} else if (cpu_is_omap15xx()) {
MPUI1510_SAVE(OMAP_IH1_MIR);
MPUI1510_SAVE(OMAP_IH2_MIR);
MPUI1510_SAVE(MPUI_CTRL);
MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
MPUI1510_SAVE(EMIFS_CONFIG);
MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
} else if (cpu_is_omap16xx()) {
MPUI1610_SAVE(OMAP_IH1_MIR);
MPUI1610_SAVE(OMAP_IH2_0_MIR);
MPUI1610_SAVE(OMAP_IH2_1_MIR);
MPUI1610_SAVE(OMAP_IH2_2_MIR);
MPUI1610_SAVE(OMAP_IH2_3_MIR);
MPUI1610_SAVE(MPUI_CTRL);
MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
MPUI1610_SAVE(EMIFS_CONFIG);
MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
}
ARM_SAVE(ARM_CKCTL);
ARM_SAVE(ARM_IDLECT1);
ARM_SAVE(ARM_IDLECT2);
if (!(cpu_is_omap15xx()))
ARM_SAVE(ARM_IDLECT3);
ARM_SAVE(ARM_EWUPCT);
ARM_SAVE(ARM_RSTCT1);
ARM_SAVE(ARM_RSTCT2);
ARM_SAVE(ARM_SYSST);
ULPD_SAVE(ULPD_CLOCK_CTRL);
ULPD_SAVE(ULPD_STATUS_REQ);
/* (Step 3 removed - we now allow deep sleep by default) */
/*
* Step 4: OMAP DSP Shutdown
*/
/* stop DSP */
omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1);
/* shut down dsp_ck */
omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
/* temporarily enabling api_ck to access DSP registers */
omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2);
/* save DSP registers */
DSP_SAVE(DSP_IDLECT2);
/* Stop all DSP domain clocks */
__raw_writew(0, DSP_IDLECT2);
/*
* Step 5: Wakeup Event Setup
*/
omap_pm_wakeup_setup();
/*
* Step 6: ARM and Traffic controller shutdown
*/
/* disable ARM watchdog */
omap_writel(0x00F5, OMAP_WDT_TIMER_MODE);
omap_writel(0x00A0, OMAP_WDT_TIMER_MODE);
/*
* Step 6b: ARM and Traffic controller shutdown
*
* Step 6 continues here. Prepare jump to power management
* assembly code in internal SRAM.
*
* Since the omap_cpu_suspend routine has been copied to
* SRAM, we'll do an indirect procedure call to it and pass the
* contents of arm_idlect1 and arm_idlect2 so it can restore
* them when it wakes up and it will return.
*/
arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1];
arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2];
/*
* Step 6c: ARM and Traffic controller shutdown
*
* Jump to assembly code. The processor will stay there
* until wake up.
*/
omap_sram_suspend(arg0, arg1);
/*
* If we are here, processor is woken up!
*/
/*
* Restore DSP clocks
*/
/* again temporarily enabling api_ck to access DSP registers */
omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2);
/* Restore DSP domain clocks */
DSP_RESTORE(DSP_IDLECT2);
/*
* Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did
*/
if (!(cpu_is_omap15xx()))
ARM_RESTORE(ARM_IDLECT3);
ARM_RESTORE(ARM_CKCTL);
ARM_RESTORE(ARM_EWUPCT);
ARM_RESTORE(ARM_RSTCT1);
ARM_RESTORE(ARM_RSTCT2);
ARM_RESTORE(ARM_SYSST);
ULPD_RESTORE(ULPD_CLOCK_CTRL);
ULPD_RESTORE(ULPD_STATUS_REQ);
if (cpu_is_omap730()) {
MPUI730_RESTORE(EMIFS_CONFIG);
MPUI730_RESTORE(EMIFF_SDRAM_CONFIG);
MPUI730_RESTORE(OMAP_IH1_MIR);
MPUI730_RESTORE(OMAP_IH2_0_MIR);
MPUI730_RESTORE(OMAP_IH2_1_MIR);
} else if (cpu_is_omap15xx()) {
MPUI1510_RESTORE(MPUI_CTRL);
MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
MPUI1510_RESTORE(MPUI_DSP_API_CONFIG);
MPUI1510_RESTORE(EMIFS_CONFIG);
MPUI1510_RESTORE(EMIFF_SDRAM_CONFIG);
MPUI1510_RESTORE(OMAP_IH1_MIR);
MPUI1510_RESTORE(OMAP_IH2_MIR);
} else if (cpu_is_omap16xx()) {
MPUI1610_RESTORE(MPUI_CTRL);
MPUI1610_RESTORE(MPUI_DSP_BOOT_CONFIG);
MPUI1610_RESTORE(MPUI_DSP_API_CONFIG);
MPUI1610_RESTORE(EMIFS_CONFIG);
MPUI1610_RESTORE(EMIFF_SDRAM_CONFIG);
MPUI1610_RESTORE(OMAP_IH1_MIR);
MPUI1610_RESTORE(OMAP_IH2_0_MIR);
MPUI1610_RESTORE(OMAP_IH2_1_MIR);
MPUI1610_RESTORE(OMAP_IH2_2_MIR);
MPUI1610_RESTORE(OMAP_IH2_3_MIR);
}
omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
/*
* Reenable interrupts
*/
local_irq_enable();
local_fiq_enable();
omap_serial_wake_trigger(0);
printk("PM: OMAP%x is re-starting from deep sleep...\n", system_rev);
if (machine_is_omap_osk()) {
/* Let LED1 (D9) blink again */
tps65010_set_led(LED1, BLINK);
}
}
#if defined(DEBUG) && defined(CONFIG_PROC_FS)
static int g_read_completed;
/*
* Read system PM registers for debugging
*/
static int omap_pm_read_proc(
char *page_buffer,
char **my_first_byte,
off_t virtual_start,
int length,
int *eof,
void *data)
{
int my_buffer_offset = 0;
char * const my_base = page_buffer;
ARM_SAVE(ARM_CKCTL);
ARM_SAVE(ARM_IDLECT1);
ARM_SAVE(ARM_IDLECT2);
if (!(cpu_is_omap15xx()))
ARM_SAVE(ARM_IDLECT3);
ARM_SAVE(ARM_EWUPCT);
ARM_SAVE(ARM_RSTCT1);
ARM_SAVE(ARM_RSTCT2);
ARM_SAVE(ARM_SYSST);
ULPD_SAVE(ULPD_IT_STATUS);
ULPD_SAVE(ULPD_CLOCK_CTRL);
ULPD_SAVE(ULPD_SOFT_REQ);
ULPD_SAVE(ULPD_STATUS_REQ);
ULPD_SAVE(ULPD_DPLL_CTRL);
ULPD_SAVE(ULPD_POWER_CTRL);
if (cpu_is_omap730()) {
MPUI730_SAVE(MPUI_CTRL);
MPUI730_SAVE(MPUI_DSP_STATUS);
MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
MPUI730_SAVE(MPUI_DSP_API_CONFIG);
MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
MPUI730_SAVE(EMIFS_CONFIG);
} else if (cpu_is_omap15xx()) {
MPUI1510_SAVE(MPUI_CTRL);
MPUI1510_SAVE(MPUI_DSP_STATUS);
MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
MPUI1510_SAVE(EMIFS_CONFIG);
} else if (cpu_is_omap16xx()) {
MPUI1610_SAVE(MPUI_CTRL);
MPUI1610_SAVE(MPUI_DSP_STATUS);
MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
MPUI1610_SAVE(EMIFS_CONFIG);
}
if (virtual_start == 0) {
g_read_completed = 0;
my_buffer_offset += sprintf(my_base + my_buffer_offset,
"ARM_CKCTL_REG: 0x%-8x \n"
"ARM_IDLECT1_REG: 0x%-8x \n"
"ARM_IDLECT2_REG: 0x%-8x \n"
"ARM_IDLECT3_REG: 0x%-8x \n"
"ARM_EWUPCT_REG: 0x%-8x \n"
"ARM_RSTCT1_REG: 0x%-8x \n"
"ARM_RSTCT2_REG: 0x%-8x \n"
"ARM_SYSST_REG: 0x%-8x \n"
"ULPD_IT_STATUS_REG: 0x%-4x \n"
"ULPD_CLOCK_CTRL_REG: 0x%-4x \n"
"ULPD_SOFT_REQ_REG: 0x%-4x \n"
"ULPD_DPLL_CTRL_REG: 0x%-4x \n"
"ULPD_STATUS_REQ_REG: 0x%-4x \n"
"ULPD_POWER_CTRL_REG: 0x%-4x \n",
ARM_SHOW(ARM_CKCTL),
ARM_SHOW(ARM_IDLECT1),
ARM_SHOW(ARM_IDLECT2),
ARM_SHOW(ARM_IDLECT3),
ARM_SHOW(ARM_EWUPCT),
ARM_SHOW(ARM_RSTCT1),
ARM_SHOW(ARM_RSTCT2),
ARM_SHOW(ARM_SYSST),
ULPD_SHOW(ULPD_IT_STATUS),
ULPD_SHOW(ULPD_CLOCK_CTRL),
ULPD_SHOW(ULPD_SOFT_REQ),
ULPD_SHOW(ULPD_DPLL_CTRL),
ULPD_SHOW(ULPD_STATUS_REQ),
ULPD_SHOW(ULPD_POWER_CTRL));
if (cpu_is_omap730()) {
my_buffer_offset += sprintf(my_base + my_buffer_offset,
"MPUI730_CTRL_REG 0x%-8x \n"
"MPUI730_DSP_STATUS_REG: 0x%-8x \n"
"MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
"MPUI730_DSP_API_CONFIG_REG: 0x%-8x \n"
"MPUI730_SDRAM_CONFIG_REG: 0x%-8x \n"
"MPUI730_EMIFS_CONFIG_REG: 0x%-8x \n",
MPUI730_SHOW(MPUI_CTRL),
MPUI730_SHOW(MPUI_DSP_STATUS),
MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG),
MPUI730_SHOW(MPUI_DSP_API_CONFIG),
MPUI730_SHOW(EMIFF_SDRAM_CONFIG),
MPUI730_SHOW(EMIFS_CONFIG));
} else if (cpu_is_omap15xx()) {
my_buffer_offset += sprintf(my_base + my_buffer_offset,
"MPUI1510_CTRL_REG 0x%-8x \n"
"MPUI1510_DSP_STATUS_REG: 0x%-8x \n"
"MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
"MPUI1510_DSP_API_CONFIG_REG: 0x%-8x \n"
"MPUI1510_SDRAM_CONFIG_REG: 0x%-8x \n"
"MPUI1510_EMIFS_CONFIG_REG: 0x%-8x \n",
MPUI1510_SHOW(MPUI_CTRL),
MPUI1510_SHOW(MPUI_DSP_STATUS),
MPUI1510_SHOW(MPUI_DSP_BOOT_CONFIG),
MPUI1510_SHOW(MPUI_DSP_API_CONFIG),
MPUI1510_SHOW(EMIFF_SDRAM_CONFIG),
MPUI1510_SHOW(EMIFS_CONFIG));
} else if (cpu_is_omap16xx()) {
my_buffer_offset += sprintf(my_base + my_buffer_offset,
"MPUI1610_CTRL_REG 0x%-8x \n"
"MPUI1610_DSP_STATUS_REG: 0x%-8x \n"
"MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
"MPUI1610_DSP_API_CONFIG_REG: 0x%-8x \n"
"MPUI1610_SDRAM_CONFIG_REG: 0x%-8x \n"
"MPUI1610_EMIFS_CONFIG_REG: 0x%-8x \n",
MPUI1610_SHOW(MPUI_CTRL),
MPUI1610_SHOW(MPUI_DSP_STATUS),
MPUI1610_SHOW(MPUI_DSP_BOOT_CONFIG),
MPUI1610_SHOW(MPUI_DSP_API_CONFIG),
MPUI1610_SHOW(EMIFF_SDRAM_CONFIG),
MPUI1610_SHOW(EMIFS_CONFIG));
}
g_read_completed++;
} else if (g_read_completed >= 1) {
*eof = 1;
return 0;
}
g_read_completed++;
*my_first_byte = page_buffer;
return my_buffer_offset;
}
static void omap_pm_init_proc(void)
{
struct proc_dir_entry *entry;
entry = create_proc_read_entry("driver/omap_pm",
S_IWUSR | S_IRUGO, NULL,
omap_pm_read_proc, NULL);
}
#endif /* DEBUG && CONFIG_PROC_FS */
static void (*saved_idle)(void) = NULL;
/*
* omap_pm_prepare - Do preliminary suspend work.
* @state: suspend state we're entering.
*
*/
static int omap_pm_prepare(suspend_state_t state)
{
int error = 0;
/* We cannot sleep in idle until we have resumed */
saved_idle = pm_idle;
pm_idle = NULL;
switch (state)
{
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
break;
case PM_SUSPEND_DISK:
return -ENOTSUPP;
default:
return -EINVAL;
}
return error;
}
/*
* omap_pm_enter - Actually enter a sleep state.
* @state: State we're entering.
*
*/
static int omap_pm_enter(suspend_state_t state)
{
switch (state)
{
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
omap_pm_suspend();
break;
case PM_SUSPEND_DISK:
return -ENOTSUPP;
default:
return -EINVAL;
}
return 0;
}
/**
* omap_pm_finish - Finish up suspend sequence.
* @state: State we're coming out of.
*
* This is called after we wake back up (or if entering the sleep state
* failed).
*/
static int omap_pm_finish(suspend_state_t state)
{
pm_idle = saved_idle;
return 0;
}
static irqreturn_t omap_wakeup_interrupt(int irq, void * dev,
struct pt_regs * regs)
{
return IRQ_HANDLED;
}
static struct irqaction omap_wakeup_irq = {
.name = "peripheral wakeup",
.flags = SA_INTERRUPT,
.handler = omap_wakeup_interrupt
};
static struct pm_ops omap_pm_ops ={
.pm_disk_mode = 0,
.prepare = omap_pm_prepare,
.enter = omap_pm_enter,
.finish = omap_pm_finish,
};
static int __init omap_pm_init(void)
{
printk("Power Management for TI OMAP.\n");
/*
* We copy the assembler sleep/wakeup routines to SRAM.
* These routines need to be in SRAM as that's the only
* memory the MPU can see when it wakes up.
*/
if (cpu_is_omap730()) {
omap_sram_idle = omap_sram_push(omap730_idle_loop_suspend,
omap730_idle_loop_suspend_sz);
omap_sram_suspend = omap_sram_push(omap730_cpu_suspend,
omap730_cpu_suspend_sz);
} else if (cpu_is_omap15xx()) {
omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend,
omap1510_idle_loop_suspend_sz);
omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
omap1510_cpu_suspend_sz);
} else if (cpu_is_omap16xx()) {
omap_sram_idle = omap_sram_push(omap1610_idle_loop_suspend,
omap1610_idle_loop_suspend_sz);
omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend,
omap1610_cpu_suspend_sz);
}
if (omap_sram_idle == NULL || omap_sram_suspend == NULL) {
printk(KERN_ERR "PM not initialized: Missing SRAM support\n");
return -ENODEV;
}
pm_idle = omap_pm_idle;
if (cpu_is_omap730())
setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
else if (cpu_is_omap16xx())
setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
/* Program new power ramp-up time
* (0 for most boards since we don't lower voltage when in deep sleep)
*/
omap_writew(ULPD_SETUP_ANALOG_CELL_3_VAL, ULPD_SETUP_ANALOG_CELL_3);
/* Setup ULPD POWER_CTRL_REG - enter deep sleep whenever possible */
omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
/* Configure IDLECT3 */
if (cpu_is_omap730())
omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3);
else if (cpu_is_omap16xx())
omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
pm_set_ops(&omap_pm_ops);
#if defined(DEBUG) && defined(CONFIG_PROC_FS)
omap_pm_init_proc();
#endif
subsys_create_file(&power_subsys, &sleep_while_idle_attr);
if (cpu_is_omap16xx()) {
/* configure LOW_PWR pin */
omap_cfg_reg(T20_1610_LOW_PWR);
}
return 0;
}
__initcall(omap_pm_init);

6
arch/arm/mach-omap1/serial.c
View File

@ -30,9 +30,9 @@
#include <asm/arch/pm.h>
#endif
static struct clk * uart1_ck = NULL;
static struct clk * uart2_ck = NULL;
static struct clk * uart3_ck = NULL;
static struct clk * uart1_ck;
static struct clk * uart2_ck;
static struct clk * uart3_ck;
static inline unsigned int omap_serial_in(struct plat_serial8250_port *up,
int offset)

111
arch/arm/plat-omap/sleep.S → arch/arm/mach-omap1/sleep.S
View File

@ -1,5 +1,5 @@
/*
* linux/arch/arm/plat-omap/sleep.S
* linux/arch/arm/mach-omap1/sleep.S
*
* Low-level OMAP730/1510/1610 sleep/wakeUp support
*
@ -383,60 +383,133 @@ ENTRY(omap1610_cpu_suspend)
mcr p15, 0, r0, c7, c10, 4
nop
@ load base address of Traffic Controller
@ Load base address of Traffic Controller
mov r6, #TCMIF_ASM_BASE & 0xff000000
orr r6, r6, #TCMIF_ASM_BASE & 0x00ff0000
orr r6, r6, #TCMIF_ASM_BASE & 0x0000ff00
@ prepare to put SDRAM into self-refresh manually
@ Prepare to put SDRAM into self-refresh manually
ldr r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
orr r9, r7, #SELF_REFRESH_MODE & 0xff000000
orr r9, r9, #SELF_REFRESH_MODE & 0x000000ff
str r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
@ prepare to put EMIFS to Sleep
@ Prepare to put EMIFS to Sleep
ldr r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
orr r9, r8, #IDLE_EMIFS_REQUEST & 0xff
str r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
@ load base address of ARM_IDLECT1 and ARM_IDLECT2
@ Load base address of ARM_IDLECT1 and ARM_IDLECT2
mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000
orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
@ turn off clock domains
@ do not disable PERCK (0x04)
@ Turn off clock domains
@ Do not disable PERCK (0x04)
mov r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff
orr r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00
strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
@ request ARM idle
@ Request ARM idle
mov r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff
orr r3, r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff00
strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
@ disable instruction cache
mrc p15, 0, r9, c1, c0, 0
bic r2, r9, #0x1000
mcr p15, 0, r2, c1, c0, 0
nop
/*
* Let's wait for the next wake up event to wake us up. r0 can't be
* used here because r0 holds ARM_IDLECT1
*/
mov r2, #0
mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
@ Errata (HEL3SU467, section 1.4.4) specifies nop-instructions
@ according to this formula:
@ 2 + (4*DPLL_MULT)/DPLL_DIV/ARMDIV
@ Max DPLL_MULT = 18
@ DPLL_DIV = 1
@ ARMDIV = 1
@ => 74 nop-instructions
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop @10
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop @20
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop @30
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop @40
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop @50
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop @60
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop @70
nop
nop
nop
nop @74
/*
* omap1610_cpu_suspend()'s resume point.
*
* It will just start executing here, so we'll restore stuff from the
* stack.
*/
@ re-enable Icache
mcr p15, 0, r9, c1, c0, 0
@ reset the ARM_IDLECT1 and ARM_IDLECT2.
@ Restore the ARM_IDLECT1 and ARM_IDLECT2.
strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
@ -444,7 +517,7 @@ ENTRY(omap1610_cpu_suspend)
str r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
str r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
@ restore regs and return
@ Restore regs and return
ldmfd sp!, {r0 - r12, pc}
ENTRY(omap1610_cpu_suspend_sz)

197
arch/arm/mach-omap1/time.c
View File

@ -51,8 +51,6 @@
struct sys_timer omap_timer;
#ifdef CONFIG_OMAP_MPU_TIMER
/*
* ---------------------------------------------------------------------------
* MPU timer
@ -222,195 +220,6 @@ unsigned long long sched_clock(void)
return cycles_2_ns(ticks64);
}
#endif /* CONFIG_OMAP_MPU_TIMER */
#ifdef CONFIG_OMAP_32K_TIMER
#ifdef CONFIG_ARCH_OMAP15XX
#error OMAP 32KHz timer does not currently work on 15XX!
#endif
/*
* ---------------------------------------------------------------------------
* 32KHz OS timer
*
* This currently works only on 16xx, as 1510 does not have the continuous
* 32KHz synchronous timer. The 32KHz synchronous timer is used to keep track
* of time in addition to the 32KHz OS timer. Using only the 32KHz OS timer
* on 1510 would be possible, but the timer would not be as accurate as
* with the 32KHz synchronized timer.
* ---------------------------------------------------------------------------
*/
#define OMAP_32K_TIMER_BASE 0xfffb9000
#define OMAP_32K_TIMER_CR 0x08
#define OMAP_32K_TIMER_TVR 0x00
#define OMAP_32K_TIMER_TCR 0x04
#define OMAP_32K_TICKS_PER_HZ (32768 / HZ)
/*
* TRM says 1 / HZ = ( TVR + 1) / 32768, so TRV = (32768 / HZ) - 1
* so with HZ = 100, TVR = 327.68.
*/
#define OMAP_32K_TIMER_TICK_PERIOD ((32768 / HZ) - 1)
#define TIMER_32K_SYNCHRONIZED 0xfffbc410
#define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate) \
(((nr_jiffies) * (clock_rate)) / HZ)
static inline void omap_32k_timer_write(int val, int reg)
{
omap_writew(val, reg + OMAP_32K_TIMER_BASE);
}
static inline unsigned long omap_32k_timer_read(int reg)
{
return omap_readl(reg + OMAP_32K_TIMER_BASE) & 0xffffff;
}
/*
* The 32KHz synchronized timer is an additional timer on 16xx.
* It is always running.
*/
static inline unsigned long omap_32k_sync_timer_read(void)
{
return omap_readl(TIMER_32K_SYNCHRONIZED);
}
static inline void omap_32k_timer_start(unsigned long load_val)
{
omap_32k_timer_write(load_val, OMAP_32K_TIMER_TVR);
omap_32k_timer_write(0x0f, OMAP_32K_TIMER_CR);
}
static inline void omap_32k_timer_stop(void)
{
omap_32k_timer_write(0x0, OMAP_32K_TIMER_CR);
}
/*
* Rounds down to nearest usec. Note that this will overflow for larger values.
*/
static inline unsigned long omap_32k_ticks_to_usecs(unsigned long ticks_32k)
{
return (ticks_32k * 5*5*5*5*5*5) >> 9;
}
/*
* Rounds down to nearest nsec.
*/
static inline unsigned long long
omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
{
return (unsigned long long) ticks_32k * 1000 * 5*5*5*5*5*5 >> 9;
}
static unsigned long omap_32k_last_tick = 0;
/*
* Returns elapsed usecs since last 32k timer interrupt
*/
static unsigned long omap_32k_timer_gettimeoffset(void)
{
unsigned long now = omap_32k_sync_timer_read();
return omap_32k_ticks_to_usecs(now - omap_32k_last_tick);
}
/*
* Returns current time from boot in nsecs. It's OK for this to wrap
* around for now, as it's just a relative time stamp.
*/
unsigned long long sched_clock(void)
{
return omap_32k_ticks_to_nsecs(omap_32k_sync_timer_read());
}
/*
* Timer interrupt for 32KHz timer. When dynamic tick is enabled, this
* function is also called from other interrupts to remove latency
* issues with dynamic tick. In the dynamic tick case, we need to lock
* with irqsave.
*/
static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
struct pt_regs *regs)
{
unsigned long flags;
unsigned long now;
write_seqlock_irqsave(&xtime_lock, flags);
now = omap_32k_sync_timer_read();
while (now - omap_32k_last_tick >= OMAP_32K_TICKS_PER_HZ) {
omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ;
timer_tick(regs);
}
/* Restart timer so we don't drift off due to modulo or dynamic tick.
* By default we program the next timer to be continuous to avoid
* latencies during high system load. During dynamic tick operation the
* continuous timer can be overridden from pm_idle to be longer.
*/
omap_32k_timer_start(omap_32k_last_tick + OMAP_32K_TICKS_PER_HZ - now);
write_sequnlock_irqrestore(&xtime_lock, flags);
return IRQ_HANDLED;
}
#ifdef CONFIG_NO_IDLE_HZ
/*
* Programs the next timer interrupt needed. Called when dynamic tick is
* enabled, and to reprogram the ticks to skip from pm_idle. Note that
* we can keep the timer continuous, and don't need to set it to run in
* one-shot mode. This is because the timer will get reprogrammed again
* after next interrupt.
*/
void omap_32k_timer_reprogram(unsigned long next_tick)
{
omap_32k_timer_start(JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1);
}
static struct irqaction omap_32k_timer_irq;
extern struct timer_update_handler timer_update;
static int omap_32k_timer_enable_dyn_tick(void)
{
/* No need to reprogram timer, just use the next interrupt */
return 0;
}
static int omap_32k_timer_disable_dyn_tick(void)
{
omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
return 0;
}
static struct dyn_tick_timer omap_dyn_tick_timer = {
.enable = omap_32k_timer_enable_dyn_tick,
.disable = omap_32k_timer_disable_dyn_tick,
.reprogram = omap_32k_timer_reprogram,
.handler = omap_32k_timer_interrupt,
};
#endif /* CONFIG_NO_IDLE_HZ */
static struct irqaction omap_32k_timer_irq = {
.name = "32KHz timer",
.flags = SA_INTERRUPT | SA_TIMER,
.handler = omap_32k_timer_interrupt,
};
static __init void omap_init_32k_timer(void)
{
#ifdef CONFIG_NO_IDLE_HZ
omap_timer.dyn_tick = &omap_dyn_tick_timer;
#endif
setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
omap_timer.offset = omap_32k_timer_gettimeoffset;
omap_32k_last_tick = omap_32k_sync_timer_read();
omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
}
#endif /* CONFIG_OMAP_32K_TIMER */
/*
* ---------------------------------------------------------------------------
@ -419,13 +228,7 @@ static __init void omap_init_32k_timer(void)
*/
static void __init omap_timer_init(void)
{
#if defined(CONFIG_OMAP_MPU_TIMER)
omap_init_mpu_timer();
#elif defined(CONFIG_OMAP_32K_TIMER)
omap_init_32k_timer();
#else
#error No system timer selected in Kconfig!
#endif
}
struct sys_timer omap_timer = {

3
arch/arm/mach-omap2/Kconfig
View File

@ -20,3 +20,6 @@ config MACH_OMAP_H4
bool "OMAP 2420 H4 board"
depends on ARCH_OMAP2 && ARCH_OMAP24XX
config MACH_OMAP_APOLLON
bool "OMAP 2420 Apollon board"
depends on ARCH_OMAP2 && ARCH_OMAP24XX

6
arch/arm/mach-omap2/Makefile
View File

@ -3,11 +3,15 @@
#
# Common support
obj-y := irq.o id.o io.o sram-fn.o clock.o mux.o devices.o serial.o
obj-y := irq.o id.o io.o sram-fn.o memory.o prcm.o clock.o mux.o devices.o serial.o
obj-$(CONFIG_OMAP_MPU_TIMER) += timer-gp.o
# Power Management
obj-$(CONFIG_PM) += pm.o sleep.o
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o

285
arch/arm/mach-omap2/board-apollon.c Normal file
View File

@ -0,0 +1,285 @@
/*
* linux/arch/arm/mach-omap/omap2/board-apollon.c
*
* Copyright (C) 2005,2006 Samsung Electronics
* Author: Kyungmin Park <kyungmin.park@samsung.com>
*
* Modified from mach-omap/omap2/board-h4.c
*
* Code for apollon OMAP2 board. Should work on many OMAP2 systems where
* the bootloader passes the board-specific data to the kernel.
* Do not put any board specific code to this file; create a new machine
* type if you need custom low-level initializations.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/onenand.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mux.h>
#include <asm/arch/usb.h>
#include <asm/arch/board.h>
#include <asm/arch/common.h>
#include "prcm-regs.h"
/* LED & Switch macros */
#define LED0_GPIO13 13
#define LED1_GPIO14 14
#define LED2_GPIO15 15
#define SW_ENTER_GPIO16 16
#define SW_UP_GPIO17 17
#define SW_DOWN_GPIO58 58
static struct mtd_partition apollon_partitions[] = {
{
.name = "X-Loader + U-Boot",
.offset = 0,
.size = SZ_128K,
.mask_flags = MTD_WRITEABLE,
},
{
.name = "params",
.offset = MTDPART_OFS_APPEND,
.size = SZ_128K,
},
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_2M,
},
{
.name = "rootfs",
.offset = MTDPART_OFS_APPEND,
.size = SZ_16M,
},
{
.name = "filesystem00",
.offset = MTDPART_OFS_APPEND,
.size = SZ_32M,
},
{
.name = "filesystem01",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
static struct flash_platform_data apollon_flash_data = {
.parts = apollon_partitions,
.nr_parts = ARRAY_SIZE(apollon_partitions),
};
static struct resource apollon_flash_resource = {
.start = APOLLON_CS0_BASE,
.end = APOLLON_CS0_BASE + SZ_128K,
.flags = IORESOURCE_MEM,
};
static struct platform_device apollon_onenand_device = {
.name = "onenand",
.id = -1,
.dev = {
.platform_data = &apollon_flash_data,
},
.num_resources = ARRAY_SIZE(&apollon_flash_resource),
.resource = &apollon_flash_resource,
};
static struct resource apollon_smc91x_resources[] = {
[0] = {
.start = APOLLON_ETHR_START, /* Physical */
.end = APOLLON_ETHR_START + 0xf,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
.end = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device apollon_smc91x_device = {
.name = "smc91x",
.id = -1,
.num_resources = ARRAY_SIZE(apollon_smc91x_resources),
.resource = apollon_smc91x_resources,
};
static struct platform_device apollon_lcd_device = {
.name = "apollon_lcd",
.id = -1,
};
static struct platform_device *apollon_devices[] __initdata = {
&apollon_onenand_device,
&apollon_smc91x_device,
&apollon_lcd_device,
};
static inline void __init apollon_init_smc91x(void)
{
/* Make sure CS1 timings are correct */
GPMC_CONFIG1_1 = 0x00011203;
GPMC_CONFIG2_1 = 0x001f1f01;
GPMC_CONFIG3_1 = 0x00080803;
GPMC_CONFIG4_1 = 0x1c091c09;
GPMC_CONFIG5_1 = 0x041f1f1f;
GPMC_CONFIG6_1 = 0x000004c4;
GPMC_CONFIG7_1 = 0x00000f40 | (APOLLON_CS1_BASE >> 24);
udelay(100);
omap_cfg_reg(W4__24XX_GPIO74);
if (omap_request_gpio(APOLLON_ETHR_GPIO_IRQ) < 0) {
printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
APOLLON_ETHR_GPIO_IRQ);
return;
}
omap_set_gpio_direction(APOLLON_ETHR_GPIO_IRQ, 1);
}
static void __init omap_apollon_init_irq(void)
{
omap2_init_common_hw();
omap_init_irq();
omap_gpio_init();
apollon_init_smc91x();
}
static struct omap_uart_config apollon_uart_config __initdata = {
.enabled_uarts = (1 << 0) | (0 << 1) | (0 << 2),
};
static struct omap_mmc_config apollon_mmc_config __initdata = {
.mmc [0] = {
.enabled = 0,
.wire4 = 0,
.wp_pin = -1,
.power_pin = -1,
.switch_pin = -1,
},
};
static struct omap_lcd_config apollon_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel apollon_config[] = {
{ OMAP_TAG_UART, &apollon_uart_config },
{ OMAP_TAG_MMC, &apollon_mmc_config },
{ OMAP_TAG_LCD, &apollon_lcd_config },
};
static void __init apollon_led_init(void)
{
/* LED0 - AA10 */
omap_cfg_reg(AA10_242X_GPIO13);
omap_request_gpio(LED0_GPIO13);
omap_set_gpio_direction(LED0_GPIO13, 0);
omap_set_gpio_dataout(LED0_GPIO13, 0);
/* LED1 - AA6 */
omap_cfg_reg(AA6_242X_GPIO14);
omap_request_gpio(LED1_GPIO14);
omap_set_gpio_direction(LED1_GPIO14, 0);
omap_set_gpio_dataout(LED1_GPIO14, 0);
/* LED2 - AA4 */
omap_cfg_reg(AA4_242X_GPIO15);
omap_request_gpio(LED2_GPIO15);
omap_set_gpio_direction(LED2_GPIO15, 0);
omap_set_gpio_dataout(LED2_GPIO15, 0);
}
static irqreturn_t apollon_sw_interrupt(int irq, void *ignored, struct pt_regs *regs)
{
static unsigned int led0, led1, led2;
if (irq == OMAP_GPIO_IRQ(SW_ENTER_GPIO16))
omap_set_gpio_dataout(LED0_GPIO13, led0 ^= 1);
else if (irq == OMAP_GPIO_IRQ(SW_UP_GPIO17))
omap_set_gpio_dataout(LED1_GPIO14, led1 ^= 1);
else if (irq == OMAP_GPIO_IRQ(SW_DOWN_GPIO58))
omap_set_gpio_dataout(LED2_GPIO15, led2 ^= 1);
return IRQ_HANDLED;
}
static void __init apollon_sw_init(void)
{
/* Enter SW - Y11 */
omap_cfg_reg(Y11_242X_GPIO16);
omap_request_gpio(SW_ENTER_GPIO16);
omap_set_gpio_direction(SW_ENTER_GPIO16, 1);
/* Up SW - AA12 */
omap_cfg_reg(AA12_242X_GPIO17);
omap_request_gpio(SW_UP_GPIO17);
omap_set_gpio_direction(SW_UP_GPIO17, 1);
/* Down SW - AA8 */
omap_cfg_reg(AA8_242X_GPIO58);
omap_request_gpio(SW_DOWN_GPIO58);
omap_set_gpio_direction(SW_DOWN_GPIO58, 1);
set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQT_RISING);
if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
SA_SHIRQ, "enter sw",
&apollon_sw_interrupt))
return;
set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQT_RISING);
if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
SA_SHIRQ, "up sw",
&apollon_sw_interrupt))
return;
set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQT_RISING);
if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
SA_SHIRQ, "down sw",
&apollon_sw_interrupt))
return;
}
static void __init omap_apollon_init(void)
{
apollon_led_init();
apollon_sw_init();
/* REVISIT: where's the correct place */
omap_cfg_reg(W19_24XX_SYS_NIRQ);
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on
* if not needed.
*/
platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
omap_board_config = apollon_config;
omap_board_config_size = ARRAY_SIZE(apollon_config);
omap_serial_init();
}
static void __init omap_apollon_map_io(void)
{
omap2_map_common_io();
}
MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
.map_io = omap_apollon_map_io,
.init_irq = omap_apollon_init_irq,
.init_machine = omap_apollon_init,
.timer = &omap_timer,
MACHINE_END

174
arch/arm/mach-omap2/board-h4.c
View File

@ -17,6 +17,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
#include <linux/workqueue.h>
#include <linux/input.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
@ -25,15 +27,57 @@
#include <asm/mach/flash.h>
#include <asm/arch/gpio.h>
#include <asm/arch/gpioexpander.h>
#include <asm/arch/mux.h>
#include <asm/arch/usb.h>
#include <asm/arch/irda.h>
#include <asm/arch/board.h>
#include <asm/arch/common.h>
#include <asm/arch/prcm.h>
#include <asm/arch/keypad.h>
#include <asm/arch/menelaus.h>
#include <asm/arch/dma.h>
#include "prcm-regs.h"
#include <asm/io.h>
#include <asm/delay.h>
static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
static int h4_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
KEY(0, 2, KEY_A),
KEY(0, 3, KEY_B),
KEY(0, 4, KEY_C),
KEY(1, 0, KEY_DOWN),
KEY(1, 1, KEY_UP),
KEY(1, 2, KEY_E),
KEY(1, 3, KEY_F),
KEY(1, 4, KEY_G),
KEY(2, 0, KEY_ENTER),
KEY(2, 1, KEY_I),
KEY(2, 2, KEY_J),
KEY(2, 3, KEY_K),
KEY(2, 4, KEY_3),
KEY(3, 0, KEY_M),
KEY(3, 1, KEY_N),
KEY(3, 2, KEY_O),
KEY(3, 3, KEY_P),
KEY(3, 4, KEY_Q),
KEY(4, 0, KEY_R),
KEY(4, 1, KEY_4),
KEY(4, 2, KEY_T),
KEY(4, 3, KEY_U),
KEY(4, 4, KEY_ENTER),
KEY(5, 0, KEY_V),
KEY(5, 1, KEY_W),
KEY(5, 2, KEY_L),
KEY(5, 3, KEY_S),
KEY(5, 4, KEY_ENTER),
0
};
static struct mtd_partition h4_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
@ -108,9 +152,123 @@ static struct platform_device h4_smc91x_device = {
.resource = h4_smc91x_resources,
};
/* Select between the IrDA and aGPS module
*/
static int h4_select_irda(struct device *dev, int state)
{
unsigned char expa;
int err = 0;
if ((err = read_gpio_expa(&expa, 0x21))) {
printk(KERN_ERR "Error reading from I/O expander\n");
return err;
}
/* 'P6' enable/disable IRDA_TX and IRDA_RX */
if (state & IR_SEL) { /* IrDa */
if ((err = write_gpio_expa(expa | 0x01, 0x21))) {
printk(KERN_ERR "Error writing to I/O expander\n");
return err;
}
} else {
if ((err = write_gpio_expa(expa & ~0x01, 0x21))) {
printk(KERN_ERR "Error writing to I/O expander\n");
return err;
}
}
return err;
}
static void set_trans_mode(void *data)
{
int *mode = data;
unsigned char expa;
int err = 0;
if ((err = read_gpio_expa(&expa, 0x20)) != 0) {
printk(KERN_ERR "Error reading from I/O expander\n");
}
expa &= ~0x01;
if (!(*mode & IR_SIRMODE)) { /* MIR/FIR */
expa |= 0x01;
}
if ((err = write_gpio_expa(expa, 0x20)) != 0) {
printk(KERN_ERR "Error writing to I/O expander\n");
}
}
static int h4_transceiver_mode(struct device *dev, int mode)
{
struct omap_irda_config *irda_config = dev->platform_data;
cancel_delayed_work(&irda_config->gpio_expa);
PREPARE_WORK(&irda_config->gpio_expa, set_trans_mode, &mode);
schedule_work(&irda_config->gpio_expa);
return 0;
}
static struct omap_irda_config h4_irda_data = {
.transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
.transceiver_mode = h4_transceiver_mode,
.select_irda = h4_select_irda,
.rx_channel = OMAP24XX_DMA_UART3_RX,
.tx_channel = OMAP24XX_DMA_UART3_TX,
.dest_start = OMAP_UART3_BASE,
.src_start = OMAP_UART3_BASE,
.tx_trigger = OMAP24XX_DMA_UART3_TX,
.rx_trigger = OMAP24XX_DMA_UART3_RX,
};
static struct resource h4_irda_resources[] = {
[0] = {
.start = INT_24XX_UART3_IRQ,
.end = INT_24XX_UART3_IRQ,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device h4_irda_device = {
.name = "omapirda",
.id = -1,
.dev = {
.platform_data = &h4_irda_data,
},
.num_resources = 1,
.resource = h4_irda_resources,
};
static struct omap_kp_platform_data h4_kp_data = {
.rows = 6,
.cols = 7,
.keymap = h4_keymap,
.rep = 1,
.row_gpios = row_gpios,
.col_gpios = col_gpios,
};
static struct platform_device h4_kp_device = {
.name = "omap-keypad",
.id = -1,
.dev = {
.platform_data = &h4_kp_data,
},
};
static struct platform_device h4_lcd_device = {
.name = "lcd_h4",
.id = -1,
};
static struct platform_device *h4_devices[] __initdata = {
&h4_smc91x_device,
&h4_flash_device,
&h4_irda_device,
&h4_kp_device,
&h4_lcd_device,
};
static inline void __init h4_init_smc91x(void)
@ -157,7 +315,6 @@ static struct omap_mmc_config h4_mmc_config __initdata = {
};
static struct omap_lcd_config h4_lcd_config __initdata = {
.panel_name = "h4",
.ctrl_name = "internal",
};
@ -174,6 +331,19 @@ static void __init omap_h4_init(void)
* You have to mux them off in device drivers later on
* if not needed.
*/
#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
omap_cfg_reg(K15_24XX_UART3_TX);
omap_cfg_reg(K14_24XX_UART3_RX);
#endif
#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
if (omap_has_menelaus()) {
row_gpios[5] = 0;
col_gpios[2] = 15;
col_gpios[6] = 18;
}
#endif
platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
omap_board_config = h4_config;
omap_board_config_size = ARRAY_SIZE(h4_config);

79
arch/arm/mach-omap2/clock.c
View File

@ -28,14 +28,14 @@
#include <asm/arch/clock.h>
#include <asm/arch/sram.h>
#include <asm/arch/prcm.h>
#include "prcm-regs.h"
#include "memory.h"
#include "clock.h"
//#define DOWN_VARIABLE_DPLL 1 /* Experimental */
static struct prcm_config *curr_prcm_set;
static struct memory_timings mem_timings;
static u32 curr_perf_level = PRCM_FULL_SPEED;
/*-------------------------------------------------------------------------
@ -54,11 +54,13 @@ static void omap2_sys_clk_recalc(struct clk * clk)
static u32 omap2_get_dpll_rate(struct clk * tclk)
{
int dpll_clk, dpll_mult, dpll_div, amult;
long long dpll_clk;
int dpll_mult, dpll_div, amult;
dpll_mult = (CM_CLKSEL1_PLL >> 12) & 0x03ff; /* 10 bits */
dpll_div = (CM_CLKSEL1_PLL >> 8) & 0x0f; /* 4 bits */
dpll_clk = (tclk->parent->rate * dpll_mult) / (dpll_div + 1);
dpll_clk = (long long)tclk->parent->rate * dpll_mult;
do_div(dpll_clk, dpll_div + 1);
amult = CM_CLKSEL2_PLL & 0x3;
dpll_clk *= amult;
@ -385,75 +387,23 @@ static u32 omap2_dll_force_needed(void)
return 0;
}
static void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
{
unsigned long dll_cnt;
u32 fast_dll = 0;
mem_timings.m_type = !((SDRC_MR_0 & 0x3) == 0x1); /* DDR = 1, SDR = 0 */
/* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
* In the case of 2422, its ok to use CS1 instead of CS0.
*/
#if 0 /* FIXME: Enable after 24xx cpu detection works */
ctype = get_cpu_type();
if (cpu_is_omap2422())
mem_timings.base_cs = 1;
else
#endif
mem_timings.base_cs = 0;
if (mem_timings.m_type != M_DDR)
return;
/* With DDR we need to determine the low frequency DLL value */
if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL))
mem_timings.dll_mode = M_UNLOCK;
else
mem_timings.dll_mode = M_LOCK;
if (mem_timings.base_cs == 0) {
fast_dll = SDRC_DLLA_CTRL;
dll_cnt = SDRC_DLLA_STATUS & 0xff00;
} else {
fast_dll = SDRC_DLLB_CTRL;
dll_cnt = SDRC_DLLB_STATUS & 0xff00;
}
if (force_lock_to_unlock_mode) {
fast_dll &= ~0xff00;
fast_dll |= dll_cnt; /* Current lock mode */
}
mem_timings.fast_dll_ctrl = fast_dll;
/* No disruptions, DDR will be offline & C-ABI not followed */
omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl,
mem_timings.fast_dll_ctrl,
mem_timings.base_cs,
force_lock_to_unlock_mode);
mem_timings.slow_dll_ctrl &= 0xff00; /* Keep lock value */
/* Turn status into unlock ctrl */
mem_timings.slow_dll_ctrl |=
((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2));
/* 90 degree phase for anything below 133Mhz */
mem_timings.slow_dll_ctrl |= (1 << 1);
}
static u32 omap2_reprogram_sdrc(u32 level, u32 force)
{
u32 slow_dll_ctrl, fast_dll_ctrl, m_type;
u32 prev = curr_perf_level, flags;
if ((curr_perf_level == level) && !force)
return prev;
m_type = omap2_memory_get_type();
slow_dll_ctrl = omap2_memory_get_slow_dll_ctrl();
fast_dll_ctrl = omap2_memory_get_fast_dll_ctrl();
if (level == PRCM_HALF_SPEED) {
local_irq_save(flags);
PRCM_VOLTSETUP = 0xffff;
omap2_sram_reprogram_sdrc(PRCM_HALF_SPEED,
mem_timings.slow_dll_ctrl,
mem_timings.m_type);
slow_dll_ctrl, m_type);
curr_perf_level = PRCM_HALF_SPEED;
local_irq_restore(flags);
}
@ -461,8 +411,7 @@ static u32 omap2_reprogram_sdrc(u32 level, u32 force)
local_irq_save(flags);
PRCM_VOLTSETUP = 0xffff;
omap2_sram_reprogram_sdrc(PRCM_FULL_SPEED,
mem_timings.fast_dll_ctrl,
mem_timings.m_type);
fast_dll_ctrl, m_type);
curr_perf_level = PRCM_FULL_SPEED;
local_irq_restore(flags);
}
@ -650,7 +599,7 @@ static u32 omap2_get_clksel(u32 *div_sel, u32 *field_mask,
case 13: /* dss2 */
mask = 0x1; break;
case 25: /* usb */
mask = 0xf; break;
mask = 0x7; break;
}
}

37
arch/arm/mach-omap2/clock.h
View File

@ -33,20 +33,6 @@ static u32 omap2_clksel_get_divisor(struct clk *clk);
#define RATE_IN_242X (1 << 0)
#define RATE_IN_243X (1 << 1)
/* Memory timings */
#define M_DDR 1
#define M_LOCK_CTRL (1 << 2)
#define M_UNLOCK 0
#define M_LOCK 1
struct memory_timings {
u32 m_type; /* ddr = 1, sdr = 0 */
u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
u32 base_cs; /* base chip select to use for calculations */
};
/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
* CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
@ -731,6 +717,16 @@ static struct clk sys_clkout2 = {
.recalc = &omap2_clksel_recalc,
};
static struct clk emul_ck = {
.name = "emul_ck",
.parent = &func_54m_ck,
.flags = CLOCK_IN_OMAP242X,
.enable_reg = (void __iomem *)&PRCM_CLKEMUL_CTRL,
.enable_bit = 0,
.recalc = &omap2_propagate_rate,
};
/*
* MPU clock domain
* Clocks:
@ -1702,7 +1698,8 @@ static struct clk hdq_fck = {
};
static struct clk i2c2_ick = {
.name = "i2c2_ick",
.name = "i2c_ick",
.id = 2,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
@ -1711,7 +1708,8 @@ static struct clk i2c2_ick = {
};
static struct clk i2c2_fck = {
.name = "i2c2_fck",
.name = "i2c_fck",
.id = 2,
.parent = &func_12m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
@ -1729,7 +1727,8 @@ static struct clk i2chs2_fck = {
};
static struct clk i2c1_ick = {
.name = "i2c1_ick",
.name = "i2c_ick",
.id = 1,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
@ -1738,7 +1737,8 @@ static struct clk i2c1_ick = {
};
static struct clk i2c1_fck = {
.name = "i2c1_fck",
.name = "i2c_fck",
.id = 1,
.parent = &func_12m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
@ -1971,6 +1971,7 @@ static struct clk *onchip_clks[] = {
&wdt1_osc_ck,
&sys_clkout,
&sys_clkout2,
&emul_ck,
/* mpu domain clocks */
&mpu_ck,
/* dsp domain clocks */

42
arch/arm/mach-omap2/devices.c
View File

@ -74,6 +74,47 @@ static void omap_init_i2c(void) {}
#endif
#if defined(CONFIG_OMAP_STI)
#define OMAP2_STI_BASE IO_ADDRESS(0x48068000)
#define OMAP2_STI_CHANNEL_BASE 0x54000000
#define OMAP2_STI_IRQ 4
static struct resource sti_resources[] = {
{
.start = OMAP2_STI_BASE,
.end = OMAP2_STI_BASE + 0x7ff,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP2_STI_CHANNEL_BASE,
.end = OMAP2_STI_CHANNEL_BASE + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP2_STI_IRQ,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device sti_device = {
.name = "sti",
.id = -1,
.dev = {
.release = omap_nop_release,
},
.num_resources = ARRAY_SIZE(sti_resources),
.resource = sti_resources,
};
static inline void omap_init_sti(void)
{
platform_device_register(&sti_device);
}
#else
static inline void omap_init_sti(void) {}
#endif
/*-------------------------------------------------------------------------*/
static int __init omap2_init_devices(void)
@ -82,6 +123,7 @@ static int __init omap2_init_devices(void)
* in alphabetical order so they're easier to sort through.
*/
omap_init_i2c();
omap_init_sti();
return 0;
}

21
arch/arm/mach-omap2/io.c
View File

@ -16,9 +16,13 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/mach/map.h>
#include <asm/tlb.h>
#include <asm/io.h>
#include <asm/mach/map.h>
#include <asm/arch/mux.h>
#include <asm/arch/omapfb.h>
extern void omap_sram_init(void);
extern int omap2_clk_init(void);
@ -43,11 +47,24 @@ static struct map_desc omap2_io_desc[] __initdata = {
}
};
void __init omap_map_common_io(void)
void __init omap2_map_common_io(void)
{
iotable_init(omap2_io_desc, ARRAY_SIZE(omap2_io_desc));
/* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
* revision check below.
*/
local_flush_tlb_all();
flush_cache_all();
omap2_check_revision();
omap_sram_init();
omapfb_reserve_mem();
}
void __init omap2_init_common_hw(void)
{
omap2_mux_init();
omap2_clk_init();
}

102
arch/arm/mach-omap2/memory.c Normal file
View File

@ -0,0 +1,102 @@
/*
* linux/arch/arm/mach-omap2/memory.c
*
* Memory timing related functions for OMAP24XX
*
* Copyright (C) 2005 Texas Instruments Inc.
* Richard Woodruff <r-woodruff2@ti.com>
*
* Copyright (C) 2005 Nokia Corporation
* Tony Lindgren <tony@atomide.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/sram.h>
#include "prcm-regs.h"
#include "memory.h"
static struct memory_timings mem_timings;
u32 omap2_memory_get_slow_dll_ctrl(void)
{
return mem_timings.slow_dll_ctrl;
}
u32 omap2_memory_get_fast_dll_ctrl(void)
{
return mem_timings.fast_dll_ctrl;
}
u32 omap2_memory_get_type(void)
{
return mem_timings.m_type;
}
void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
{
unsigned long dll_cnt;
u32 fast_dll = 0;
mem_timings.m_type = !((SDRC_MR_0 & 0x3) == 0x1); /* DDR = 1, SDR = 0 */
/* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
* In the case of 2422, its ok to use CS1 instead of CS0.
*/
if (cpu_is_omap2422())
mem_timings.base_cs = 1;
else
mem_timings.base_cs = 0;
if (mem_timings.m_type != M_DDR)
return;
/* With DDR we need to determine the low frequency DLL value */
if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL))
mem_timings.dll_mode = M_UNLOCK;
else
mem_timings.dll_mode = M_LOCK;
if (mem_timings.base_cs == 0) {
fast_dll = SDRC_DLLA_CTRL;
dll_cnt = SDRC_DLLA_STATUS & 0xff00;
} else {
fast_dll = SDRC_DLLB_CTRL;
dll_cnt = SDRC_DLLB_STATUS & 0xff00;
}
if (force_lock_to_unlock_mode) {
fast_dll &= ~0xff00;
fast_dll |= dll_cnt; /* Current lock mode */
}
/* set fast timings with DLL filter disabled */
mem_timings.fast_dll_ctrl = (fast_dll | (3 << 8));
/* No disruptions, DDR will be offline & C-ABI not followed */
omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl,
mem_timings.fast_dll_ctrl,
mem_timings.base_cs,
force_lock_to_unlock_mode);
mem_timings.slow_dll_ctrl &= 0xff00; /* Keep lock value */
/* Turn status into unlock ctrl */
mem_timings.slow_dll_ctrl |=
((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2));
/* 90 degree phase for anything below 133Mhz + disable DLL filter */
mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
}

34
arch/arm/mach-omap2/memory.h Normal file
View File

@ -0,0 +1,34 @@
/*
* linux/arch/arm/mach-omap2/memory.h
*
* Interface for memory timing related functions for OMAP24XX
*
* Copyright (C) 2005 Texas Instruments Inc.
* Richard Woodruff <r-woodruff2@ti.com>
*
* Copyright (C) 2005 Nokia Corporation
* Tony Lindgren <tony@atomide.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* Memory timings */
#define M_DDR 1
#define M_LOCK_CTRL (1 << 2)
#define M_UNLOCK 0
#define M_LOCK 1
struct memory_timings {
u32 m_type; /* ddr = 1, sdr = 0 */
u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
u32 base_cs; /* base chip select to use for calculations */
};
extern void omap2_init_memory_params(u32 force_lock_to_unlock_mode);
extern u32 omap2_memory_get_slow_dll_ctrl(void);
extern u32 omap2_memory_get_fast_dll_ctrl(void);
extern u32 omap2_memory_get_type(void);

45
arch/arm/mach-omap2/mux.c
View File

@ -50,9 +50,54 @@ MUX_CFG_24XX("H19_24XX_I2C2_SDA", 0x114, 0, 0, 0, 1)
/* Menelaus interrupt */
MUX_CFG_24XX("W19_24XX_SYS_NIRQ", 0x12c, 0, 1, 1, 1)
/* 24xx clocks */
MUX_CFG_24XX("W14_24XX_SYS_CLKOUT", 0x137, 0, 1, 1, 1)
/* 24xx McBSP */
MUX_CFG_24XX("Y15_24XX_MCBSP2_CLKX", 0x124, 1, 1, 0, 1)
MUX_CFG_24XX("R14_24XX_MCBSP2_FSX", 0x125, 1, 1, 0, 1)
MUX_CFG_24XX("W15_24XX_MCBSP2_DR", 0x126, 1, 1, 0, 1)
MUX_CFG_24XX("V15_24XX_MCBSP2_DX", 0x127, 1, 1, 0, 1)
/* 24xx GPIO */
MUX_CFG_24XX("M21_242X_GPIO11", 0x0c9, 3, 1, 1, 1)
MUX_CFG_24XX("AA10_242X_GPIO13", 0x0e5, 3, 0, 0, 1)
MUX_CFG_24XX("AA6_242X_GPIO14", 0x0e6, 3, 0, 0, 1)
MUX_CFG_24XX("AA4_242X_GPIO15", 0x0e7, 3, 0, 0, 1)
MUX_CFG_24XX("Y11_242X_GPIO16", 0x0e8, 3, 0, 0, 1)
MUX_CFG_24XX("AA12_242X_GPIO17", 0x0e9, 3, 0, 0, 1)
MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea, 3, 0, 0, 1)
MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1)
MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1)
MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1)
MUX_CFG_24XX("V14_24XX_GPIO117", 0x128, 3, 1, 0, 1)
/* TSC IRQ */
MUX_CFG_24XX("P20_24XX_TSC_IRQ", 0x108, 0, 0, 0, 1)
/* UART3 */
MUX_CFG_24XX("K15_24XX_UART3_TX", 0x118, 0, 0, 0, 1)
MUX_CFG_24XX("K14_24XX_UART3_RX", 0x119, 0, 0, 0, 1)
/* Keypad GPIO*/
MUX_CFG_24XX("T19_24XX_KBR0", 0x106, 3, 1, 1, 1)
MUX_CFG_24XX("R19_24XX_KBR1", 0x107, 3, 1, 1, 1)
MUX_CFG_24XX("V18_24XX_KBR2", 0x139, 3, 1, 1, 1)
MUX_CFG_24XX("M21_24XX_KBR3", 0xc9, 3, 1, 1, 1)
MUX_CFG_24XX("E5__24XX_KBR4", 0x138, 3, 1, 1, 1)
MUX_CFG_24XX("M18_24XX_KBR5", 0x10e, 3, 1, 1, 1)
MUX_CFG_24XX("R20_24XX_KBC0", 0x108, 3, 0, 0, 1)
MUX_CFG_24XX("M14_24XX_KBC1", 0x109, 3, 0, 0, 1)
MUX_CFG_24XX("H19_24XX_KBC2", 0x114, 3, 0, 0, 1)
MUX_CFG_24XX("V17_24XX_KBC3", 0x135, 3, 0, 0, 1)
MUX_CFG_24XX("P21_24XX_KBC4", 0xca, 3, 0, 0, 1)
MUX_CFG_24XX("L14_24XX_KBC5", 0x10f, 3, 0, 0, 1)
MUX_CFG_24XX("N19_24XX_KBC6", 0x110, 3, 0, 0, 1)
/* 24xx Menelaus Keypad GPIO */
MUX_CFG_24XX("B3__24XX_KBR5", 0x30, 3, 1, 1, 1)
MUX_CFG_24XX("AA4_24XX_KBC2", 0xe7, 3, 0, 0, 1)
MUX_CFG_24XX("B13_24XX_KBC6", 0x110, 3, 0, 0, 1)
};

149
arch/arm/mach-omap2/pm.c Normal file
View File

@ -0,0 +1,149 @@
/*
* linux/arch/arm/mach-omap2/pm.c
*
* OMAP2 Power Management Routines
*
* Copyright (C) 2006 Nokia Corporation
* Tony Lindgren <tony@atomide.com>
*
* Copyright (C) 2005 Texas Instruments, Inc.
* Richard Woodruff <r-woodruff2@ti.com>
*
* Based on pm.c for omap1
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/pm.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
#include <linux/pm.h>
#include <linux/interrupt.h>
#include <linux/sysfs.h>
#include <linux/module.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
#include <asm/arch/irqs.h>
#include <asm/arch/clock.h>
#include <asm/arch/sram.h>
#include <asm/arch/pm.h>
static struct clk *vclk;
static void (*omap2_sram_idle)(void);
static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
static void (*saved_idle)(void);
void omap2_pm_idle(void)
{
local_irq_disable();
local_fiq_disable();
if (need_resched()) {
local_fiq_enable();
local_irq_enable();
return;
}
/*
* Since an interrupt may set up a timer, we don't want to
* reprogram the hardware timer with interrupts enabled.
* Re-enable interrupts only after returning from idle.
*/
timer_dyn_reprogram();
omap2_sram_idle();
local_fiq_enable();
local_irq_enable();
}
static int omap2_pm_prepare(suspend_state_t state)
{
int error = 0;
/* We cannot sleep in idle until we have resumed */
saved_idle = pm_idle;
pm_idle = NULL;
switch (state)
{
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
break;
case PM_SUSPEND_DISK:
return -ENOTSUPP;
default:
return -EINVAL;
}
return error;
}
static int omap2_pm_enter(suspend_state_t state)
{
switch (state)
{
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
/* FIXME: Add suspend */
break;
case PM_SUSPEND_DISK:
return -ENOTSUPP;
default:
return -EINVAL;
}
return 0;
}
static int omap2_pm_finish(suspend_state_t state)
{
pm_idle = saved_idle;
return 0;
}
static struct pm_ops omap_pm_ops = {
.pm_disk_mode = 0,
.prepare = omap2_pm_prepare,
.enter = omap2_pm_enter,
.finish = omap2_pm_finish,
};
int __init omap2_pm_init(void)
{
printk("Power Management for TI OMAP.\n");
vclk = clk_get(NULL, "virt_prcm_set");
if (IS_ERR(vclk)) {
printk(KERN_ERR "Could not get PM vclk\n");
return -ENODEV;
}
/*
* We copy the assembler sleep/wakeup routines to SRAM.
* These routines need to be in SRAM as that's the only
* memory the MPU can see when it wakes up.
*/
omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
omap24xx_idle_loop_suspend_sz);
omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
omap24xx_cpu_suspend_sz);
pm_set_ops(&omap_pm_ops);
pm_idle = omap2_pm_idle;
return 0;
}
__initcall(omap2_pm_init);

182
arch/arm/mach-omap2/prcm.h → arch/arm/mach-omap2/prcm-regs.h
View File

@ -1,5 +1,7 @@
/*
* prcm.h - Access definations for use in OMAP24XX clock and power management
* linux/arch/arm/mach-omap2/prcm-reg.h
*
* OMAP24XX Power Reset and Clock Management (PRCM) registers
*
* Copyright (C) 2005 Texas Instruments, Inc.
*
@ -18,8 +20,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
#define __ASM_ARM_ARCH_DPM_PRCM_H
#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_H
#define __ARCH_ARM_MACH_OMAP2_PRCM_H
/* SET_PERFORMANCE_LEVEL PARAMETERS */
#define PRCM_HALF_SPEED 1
@ -159,54 +161,63 @@
#define CM_FCLKEN_MDM PRCM_REG32(0xC00)
#define CM_ICLKEN_MDM PRCM_REG32(0xC10)
#define CM_IDLEST_MDM PRCM_REG32(0xC20)
#define CM_AUTOIDLE_MDM PRCM_REG32(0xC30)
#define CM_CLKSEL_MDM PRCM_REG32(0xC40)
#define CM_CLKSTCTRL_MDM PRCM_REG32(0xC48)
#define RM_RSTCTRL_MDM PRCM_REG32(0xC50)
#define RM_RSTST_MDM PRCM_REG32(0xC58)
#define PM_WKEN_MDM PRCM_REG32(0xCA0)
#define PM_WKST_MDM PRCM_REG32(0xCB0)
#define PM_WKDEP_MDM PRCM_REG32(0xCC8)
#define PM_PWSTCTRL_MDM PRCM_REG32(0xCE0)
#define PM_PWSTST_MDM PRCM_REG32(0xCE4)
/* FIXME: Move to header for 2430 */
#define DISP_BASE (OMAP24XX_L4_IO_BASE+0x50000)
#define OMAP24XX_L4_IO_BASE 0x48000000
#define DISP_BASE (OMAP24XX_L4_IO_BASE + 0x50000)
#define DISP_REG32(offset) __REG32(DISP_BASE + (offset))
#define GPMC_BASE (OMAP24XX_GPMC_BASE)
#define GPMC_REG32(offset) __REG32(GPMC_BASE + (offset))
#define OMAP24XX_GPMC_BASE (L3_24XX_BASE + 0xa000)
#define GPMC_REG32(offset) __REG32(OMAP24XX_GPMC_BASE + (offset))
#define GPT1_BASE (OMAP24XX_GPT1)
/* FIXME: Move these to timer code */
#define GPT1_BASE (0x48028000)
#define GPT1_REG32(offset) __REG32(GPT1_BASE + (offset))
/* Misc sysconfig */
#define DISPC_SYSCONFIG DISP_REG32(0x410)
#define SPI_BASE (OMAP24XX_L4_IO_BASE+0x98000)
#define SPI_BASE (OMAP24XX_L4_IO_BASE + 0x98000)
#define MCSPI1_SYSCONFIG __REG32(SPI_BASE + 0x10)
#define MCSPI2_SYSCONFIG __REG32(SPI_BASE+0x2000 + 0x10)
#define MCSPI2_SYSCONFIG __REG32(SPI_BASE + 0x2000 + 0x10)
#define MCSPI3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0xb8010)
//#define DSP_MMU_SYSCONFIG 0x5A000010
#define CAMERA_MMU_SYSCONFIG __REG32(DISP_BASE+0x2C10)
//#define IVA_MMU_SYSCONFIG 0x5D000010
//#define DSP_DMA_SYSCONFIG 0x00FCC02C
#define CAMERA_DMA_SYSCONFIG __REG32(DISP_BASE+0x282C)
#define SYSTEM_DMA_SYSCONFIG __REG32(DISP_BASE+0x602C)
#define CAMERA_MMU_SYSCONFIG __REG32(DISP_BASE + 0x2C10)
#define CAMERA_DMA_SYSCONFIG __REG32(DISP_BASE + 0x282C)
#define SYSTEM_DMA_SYSCONFIG __REG32(DISP_BASE + 0x602C)
#define GPMC_SYSCONFIG GPMC_REG32(0x010)
#define MAILBOXES_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x94010)
#define UART1_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6A054)
#define UART2_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6C054)
#define UART3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6E054)
//#define IVA_SYSCONFIG 0x5C060010
#define SDRC_SYSCONFIG __REG32(OMAP24XX_SDRC_BASE+0x10)
#define SMS_SYSCONFIG __REG32(OMAP24XX_SMS_BASE+0x10)
#define SSI_SYSCONFIG __REG32(DISP_BASE+0x8010)
//#define VLYNQ_SYSCONFIG 0x67FFFE10
#define MAILBOXES_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x94010)
#define UART1_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x6A054)
#define UART2_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x6C054)
#define UART3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x6E054)
#define SDRC_SYSCONFIG __REG32(OMAP24XX_SDRC_BASE + 0x10)
#define OMAP24XX_SMS_BASE (L3_24XX_BASE + 0x8000)
#define SMS_SYSCONFIG __REG32(OMAP24XX_SMS_BASE + 0x10)
#define SSI_SYSCONFIG __REG32(DISP_BASE + 0x8010)
/* rkw - good cannidates for PM_ to start what nm was trying */
#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE+0x2A000)
#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE+0x78000)
#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE+0x7A000)
#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE+0x7C000)
#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE+0x7E000)
#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE+0x80000)
#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE+0x82000)
#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE+0x84000)
#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE+0x86000)
#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE+0x88000)
#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE+0x8A000)
#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE + 0x2A000)
#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE + 0x78000)
#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE + 0x7A000)
#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE + 0x7C000)
#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE + 0x7E000)
#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE + 0x80000)
#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE + 0x82000)
#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE + 0x84000)
#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE + 0x86000)
#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE + 0x88000)
#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE + 0x8A000)
/* FIXME: Move these to timer code */
#define GPTIMER1_SYSCONFIG GPT1_REG32(0x010)
#define GPTIMER2_SYSCONFIG __REG32(OMAP24XX_GPT2 + 0x10)
#define GPTIMER3_SYSCONFIG __REG32(OMAP24XX_GPT3 + 0x10)
@ -220,12 +231,18 @@
#define GPTIMER11_SYSCONFIG __REG32(OMAP24XX_GPT11 + 0x10)
#define GPTIMER12_SYSCONFIG __REG32(OMAP24XX_GPT12 + 0x10)
#define GPIOX_BASE(X) (OMAP24XX_GPIO_BASE+(0x2000*((X)-1)))
/* FIXME: Move these to gpio code */
#define OMAP24XX_GPIO_BASE 0x48018000
#define GPIOX_BASE(X) (OMAP24XX_GPIO_BASE + (0x2000 * ((X) - 1)))
#define GPIO1_SYSCONFIG __REG32((GPIOX_BASE(1)+0x10))
#define GPIO2_SYSCONFIG __REG32((GPIOX_BASE(2)+0x10))
#define GPIO3_SYSCONFIG __REG32((GPIOX_BASE(3)+0x10))
#define GPIO4_SYSCONFIG __REG32((GPIOX_BASE(4)+0x10))
#define GPIO1_SYSCONFIG __REG32((GPIOX_BASE(1) + 0x10))
#define GPIO2_SYSCONFIG __REG32((GPIOX_BASE(2) + 0x10))
#define GPIO3_SYSCONFIG __REG32((GPIOX_BASE(3) + 0x10))
#define GPIO4_SYSCONFIG __REG32((GPIOX_BASE(4) + 0x10))
#if defined(CONFIG_ARCH_OMAP243X)
#define GPIO5_SYSCONFIG __REG32((OMAP24XX_GPIO5_BASE + 0x10))
#endif
/* GP TIMER 1 */
#define GPTIMER1_TISTAT GPT1_REG32(0x014)
@ -243,15 +260,15 @@
#define GPTIMER1_TCAR2 GPT1_REG32(0x044)
/* rkw -- base fix up please... */
#define GPTIMER3_TISR __REG32(OMAP24XX_L4_IO_BASE+0x78018)
#define GPTIMER3_TISR __REG32(OMAP24XX_L4_IO_BASE + 0x78018)
/* SDRC */
#define SDRC_DLLA_CTRL __REG32(OMAP24XX_SDRC_BASE+0x060)
#define SDRC_DLLA_STATUS __REG32(OMAP24XX_SDRC_BASE+0x064)
#define SDRC_DLLB_CTRL __REG32(OMAP24XX_SDRC_BASE+0x068)
#define SDRC_DLLB_STATUS __REG32(OMAP24XX_SDRC_BASE+0x06C)
#define SDRC_POWER __REG32(OMAP24XX_SDRC_BASE+0x070)
#define SDRC_MR_0 __REG32(OMAP24XX_SDRC_BASE+0x084)
#define SDRC_DLLA_CTRL __REG32(OMAP24XX_SDRC_BASE + 0x060)
#define SDRC_DLLA_STATUS __REG32(OMAP24XX_SDRC_BASE + 0x064)
#define SDRC_DLLB_CTRL __REG32(OMAP24XX_SDRC_BASE + 0x068)
#define SDRC_DLLB_STATUS __REG32(OMAP24XX_SDRC_BASE + 0x06C)
#define SDRC_POWER __REG32(OMAP24XX_SDRC_BASE + 0x070)
#define SDRC_MR_0 __REG32(OMAP24XX_SDRC_BASE + 0x084)
/* GPIO 1 */
#define GPIO1_BASE GPIOX_BASE(1)
@ -278,6 +295,8 @@
#define GPIO2_DATAIN GPIO2_REG32(0x038)
#define GPIO2_OE GPIO2_REG32(0x034)
#define GPIO2_DATAOUT GPIO2_REG32(0x03C)
#define GPIO2_DEBOUNCENABLE GPIO2_REG32(0x050)
#define GPIO2_DEBOUNCINGTIME GPIO2_REG32(0x054)
/* GPIO 3 */
#define GPIO3_BASE GPIOX_BASE(3)
@ -294,6 +313,8 @@
#define GPIO3_DATAOUT GPIO3_REG32(0x03C)
#define GPIO3_DEBOUNCENABLE GPIO3_REG32(0x050)
#define GPIO3_DEBOUNCINGTIME GPIO3_REG32(0x054)
#define GPIO3_DEBOUNCENABLE GPIO3_REG32(0x050)
#define GPIO3_DEBOUNCINGTIME GPIO3_REG32(0x054)
/* GPIO 4 */
#define GPIO4_BASE GPIOX_BASE(4)
@ -311,10 +332,26 @@
#define GPIO4_DEBOUNCENABLE GPIO4_REG32(0x050)
#define GPIO4_DEBOUNCINGTIME GPIO4_REG32(0x054)
#if defined(CONFIG_ARCH_OMAP243X)
/* GPIO 5 */
#define GPIO5_REG32(offset) __REG32((OMAP24XX_GPIO5_BASE + (offset)))
#define GPIO5_IRQENABLE1 GPIO5_REG32(0x01C)
#define GPIO5_IRQSTATUS1 GPIO5_REG32(0x018)
#define GPIO5_IRQENABLE2 GPIO5_REG32(0x02C)
#define GPIO5_IRQSTATUS2 GPIO5_REG32(0x028)
#define GPIO5_WAKEUPENABLE GPIO5_REG32(0x020)
#define GPIO5_RISINGDETECT GPIO5_REG32(0x048)
#define GPIO5_FALLINGDETECT GPIO5_REG32(0x04C)
#define GPIO5_DATAIN GPIO5_REG32(0x038)
#define GPIO5_OE GPIO5_REG32(0x034)
#define GPIO5_DATAOUT GPIO5_REG32(0x03C)
#define GPIO5_DEBOUNCENABLE GPIO5_REG32(0x050)
#define GPIO5_DEBOUNCINGTIME GPIO5_REG32(0x054)
#endif
/* IO CONFIG */
#define CONTROL_BASE (OMAP24XX_CTRL_BASE)
#define CONTROL_REG32(offset) __REG32(CONTROL_BASE + (offset))
#define OMAP24XX_CTRL_BASE (L4_24XX_BASE)
#define CONTROL_REG32(offset) __REG32(OMAP24XX_CTRL_BASE + (offset))
#define CONTROL_PADCONF_SPI1_NCS2 CONTROL_REG32(0x104)
#define CONTROL_PADCONF_SYS_XTALOUT CONTROL_REG32(0x134)
@ -322,15 +359,18 @@
#define CONTROL_PADCONF_MCBSP1_DX CONTROL_REG32(0x10C)
#define CONTROL_PADCONF_GPMC_NCS4 CONTROL_REG32(0x090)
#define CONTROL_PADCONF_DSS_D5 CONTROL_REG32(0x0B8)
#define CONTROL_PADCONF_DSS_D9 CONTROL_REG32(0x0BC)
#define CONTROL_PADCONF_DSS_D9 CONTROL_REG32(0x0BC) /* 2420 */
#define CONTROL_PADCONF_DSS_D13 CONTROL_REG32(0x0C0)
#define CONTROL_PADCONF_DSS_VSYNC CONTROL_REG32(0x0CC)
#define CONTROL_PADCONF_SYS_NIRQW0 CONTROL_REG32(0x0BC) /* 2430 */
#define CONTROL_PADCONF_SSI1_FLAG_TX CONTROL_REG32(0x108) /* 2430 */
/* CONTROL */
#define CONTROL_DEVCONF CONTROL_REG32(0x274)
#define CONTROL_DEVCONF1 CONTROL_REG32(0x2E8)
/* INTERRUPT CONTROLLER */
#define INTC_BASE (OMAP24XX_L4_IO_BASE+0xfe000)
#define INTC_BASE ((L4_24XX_BASE) + 0xfe000)
#define INTC_REG32(offset) __REG32(INTC_BASE + (offset))
#define INTC1_U_BASE INTC_REG32(0x000)
@ -348,10 +388,12 @@
#define INTC_ISR_CLEAR2 INTC_REG32(0x0D4)
#define INTC_SIR_IRQ INTC_REG32(0x040)
#define INTC_CONTROL INTC_REG32(0x048)
#define INTC_ILR11 INTC_REG32(0x12C)
#define INTC_ILR11 INTC_REG32(0x12C) /* PRCM on MPU PIC */
#define INTC_ILR30 INTC_REG32(0x178)
#define INTC_ILR31 INTC_REG32(0x17C)
#define INTC_ILR32 INTC_REG32(0x180)
#define INTC_ILR37 INTC_REG32(0x194)
#define INTC_SYSCONFIG INTC_REG32(0x010)
#define INTC_ILR37 INTC_REG32(0x194) /* GPIO4 on MPU PIC */
#define INTC_SYSCONFIG INTC_REG32(0x010) /* GPT1 on MPU PIC */
/* RAM FIREWALL */
#define RAMFW_BASE (0x68005000)
@ -373,6 +415,24 @@
#define GPMC_CONFIG6_0 GPMC_REG32(0x074)
#define GPMC_CONFIG7_0 GPMC_REG32(0x078)
/* GPMC CS1 */
#define GPMC_CONFIG1_1 GPMC_REG32(0x090)
#define GPMC_CONFIG2_1 GPMC_REG32(0x094)
#define GPMC_CONFIG3_1 GPMC_REG32(0x098)
#define GPMC_CONFIG4_1 GPMC_REG32(0x09C)
#define GPMC_CONFIG5_1 GPMC_REG32(0x0a0)
#define GPMC_CONFIG6_1 GPMC_REG32(0x0a4)
#define GPMC_CONFIG7_1 GPMC_REG32(0x0a8)
/* GPMC CS3 */
#define GPMC_CONFIG1_3 GPMC_REG32(0x0F0)
#define GPMC_CONFIG2_3 GPMC_REG32(0x0F4)
#define GPMC_CONFIG3_3 GPMC_REG32(0x0F8)
#define GPMC_CONFIG4_3 GPMC_REG32(0x0FC)
#define GPMC_CONFIG5_3 GPMC_REG32(0x100)
#define GPMC_CONFIG6_3 GPMC_REG32(0x104)
#define GPMC_CONFIG7_3 GPMC_REG32(0x108)
/* DSS */
#define DSS_CONTROL DISP_REG32(0x040)
#define DISPC_CONTROL DISP_REG32(0x440)
@ -405,11 +465,15 @@
#define DISPC_DATA_CYCLE2 DISP_REG32(0x5D8)
#define DISPC_DATA_CYCLE3 DISP_REG32(0x5DC)
/* Wake up define for board */
#define GPIO97 (1 << 1)
#define GPIO88 (1 << 24)
/* HSUSB Suspend */
#define HSUSB_CTRL __REG8(0x480AC001)
#define USBOTG_POWER __REG32(0x480AC000)
#endif /* __ASSEMBLER__ */
/* HS MMC */
#define MMCHS1_SYSCONFIG __REG32(0x4809C010)
#define MMCHS2_SYSCONFIG __REG32(0x480b4010)
#endif /* __ASSEMBLER__ */
#endif

40
arch/arm/mach-omap2/prcm.c Normal file
View File

@ -0,0 +1,40 @@
/*
* linux/arch/arm/mach-omap2/prcm.c
*
* OMAP 24xx Power Reset and Clock Management (PRCM) functions
*
* Copyright (C) 2005 Nokia Corporation
*
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
* Some pieces of code Copyright (C) 2005 Texas Instruments, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/clk.h>
#include "prcm-regs.h"
u32 omap_prcm_get_reset_sources(void)
{
return RM_RSTST_WKUP & 0x7f;
}
EXPORT_SYMBOL(omap_prcm_get_reset_sources);
/* Resets clock rates and reboots the system. Only called from system.h */
void omap_prcm_arch_reset(char mode)
{
u32 rate;
struct clk *vclk, *sclk;
vclk = clk_get(NULL, "virt_prcm_set");
sclk = clk_get(NULL, "sys_ck");
rate = clk_get_rate(sclk);
clk_set_rate(vclk, rate); /* go to bypass for OMAP limitation */
RM_RSTCTRL_WKUP |= 2;
}

144
arch/arm/mach-omap2/sleep.S Normal file
View File

@ -0,0 +1,144 @@
/*
* linux/arch/arm/mach-omap2/sleep.S
*
* (C) Copyright 2004
* Texas Instruments, <www.ti.com>
* Richard Woodruff <r-woodruff2@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/arch/io.h>
#include <asm/arch/pm.h>
#define A_32KSYNC_CR_V IO_ADDRESS(OMAP_TIMER32K_BASE+0x10)
#define A_PRCM_VOLTCTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x50)
#define A_PRCM_CLKCFG_CTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x80)
#define A_CM_CLKEN_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x500)
#define A_CM_IDLEST_CKGEN_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x520)
#define A_CM_CLKSEL1_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x540)
#define A_CM_CLKSEL2_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x544)
#define A_SDRC_DLLA_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0x60)
#define A_SDRC_POWER_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0x70)
#define A_SDRC_RFR_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0xA4)
#define A_SDRC0_V (0xC0000000)
#define A_SDRC_MANUAL_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0xA8)
.text
/*
* Forces OMAP into idle state
*
* omap24xx_idle_loop_suspend() - This bit of code just executes the WFI
* for normal idles.
*
* Note: This code get's copied to internal SRAM at boot. When the OMAP
* wakes up it continues execution at the point it went to sleep.
*/
ENTRY(omap24xx_idle_loop_suspend)
stmfd sp!, {r0, lr} @ save registers on stack
mov r0, #0 @ clear for mcr setup
mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt
ldmfd sp!, {r0, pc} @ restore regs and return
ENTRY(omap24xx_idle_loop_suspend_sz)
.word . - omap24xx_idle_loop_suspend
/*
* omap242x_cpu_suspend() - Forces OMAP into deep sleep state by completing
* SDRC shutdown then ARM shutdown. Upon wake MPU is back on so just restore
* SDRC.
*
* Input:
* R0 : DLL ctrl value pre-Sleep
* R1 : Processor+Revision
* 2420: 0x21 = 242xES1, 0x26 = 242xES2.2
* 2430: 0x31 = 2430ES1, 0x32 = 2430ES2
*
* The if the DPLL is going to AutoIdle. It seems like the DPLL may be back on
* when we get called, but the DLL probably isn't. We will wait a bit more in
* case the DPLL isn't quite there yet. The code will wait on DLL for DDR even
* if in unlocked mode.
*
* For less than 242x-ES2.2 upon wake from a sleep mode where the external
* oscillator was stopped, a timing bug exists where a non-stabilized 12MHz
* clock can pass into the PRCM can cause problems at DSP and IVA.
* To work around this the code will switch to the 32kHz source prior to sleep.
* Post sleep we will shift back to using the DPLL. Apparently,
* CM_IDLEST_CLKGEN does not reflect the full clock change so you need to wait
* 3x12MHz + 3x32kHz clocks for a full switch.
*
* The DLL load value is not kept in RETENTION or OFF. It needs to be restored
* at wake
*/
ENTRY(omap24xx_cpu_suspend)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
mov r3, #0x0 @ clear for mrc call
mcr p15, 0, r3, c7, c10, 4 @ memory barrier, hope SDR/DDR finished
nop
nop
ldr r3, A_SDRC_POWER @ addr of sdrc power
ldr r4, [r3] @ value of sdrc power
orr r4, r4, #0x40 @ enable self refresh on idle req
mov r5, #0x2000 @ set delay (DPLL relock + DLL relock)
str r4, [r3] @ make it so
mov r2, #0
nop
mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
nop
loop:
subs r5, r5, #0x1 @ awake, wait just a bit
bne loop
/* The DPLL has on before we take the DDR out of self refresh */
bic r4, r4, #0x40 @ now clear self refresh bit.
str r4, [r3] @ put vlaue back.
ldr r4, A_SDRC0 @ make a clock happen
ldr r4, [r4]
nop @ start auto refresh only after clk ok
movs r0, r0 @ see if DDR or SDR
ldrne r1, A_SDRC_DLLA_CTRL_S @ get addr of DLL ctrl
strne r0, [r1] @ rewrite DLLA to force DLL reload
addne r1, r1, #0x8 @ move to DLLB
strne r0, [r1] @ rewrite DLLB to force DLL reload
mov r5, #0x1000
loop2:
subs r5, r5, #0x1
bne loop2
/* resume*/
ldmfd sp!, {r0 - r12, pc} @ restore regs and return
A_SDRC_POWER:
.word A_SDRC_POWER_V
A_SDRC0:
.word A_SDRC0_V
A_CM_CLKSEL2_PLL_S:
.word A_CM_CLKSEL2_PLL_V
A_CM_CLKEN_PLL:
.word A_CM_CLKEN_PLL_V
A_SDRC_DLLA_CTRL_S:
.word A_SDRC_DLLA_CTRL_V
A_SDRC_MANUAL_S:
.word A_SDRC_MANUAL_V
ENTRY(omap24xx_cpu_suspend_sz)
.word . - omap24xx_cpu_suspend

4
arch/arm/mach-omap2/sram-fn.S
View File

@ -1,5 +1,5 @@
/*
* linux/arch/arm/mach-omap1/sram.S
* linux/arch/arm/mach-omap2/sram.S
*
* Omap2 specific functions that need to be run in internal SRAM
*
@ -28,7 +28,7 @@
#include <asm/arch/io.h>
#include <asm/hardware.h>
#include <asm/arch/prcm.h>
#include "prcm-regs.h"
#define TIMER_32KSYNCT_CR_V IO_ADDRESS(OMAP24XX_32KSYNCT_BASE + 0x010)

4
arch/arm/mach-pxa/poodle.c
View File

@ -307,6 +307,10 @@ static void __init fixup_poodle(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
sharpsl_save_param();
mi->nr_banks=1;
mi->bank[0].start = 0xa0000000;
mi->bank[0].node = 0;
mi->bank[0].size = (32*1024*1024);
}
MACHINE_START(POODLE, "SHARP Poodle")

7
arch/arm/mach-s3c2410/Kconfig
View File

@ -50,9 +50,15 @@ config MACH_N30
<http://zoo.weinigel.se/n30>.
config MACH_SMDK
bool
help
Common machine code for SMDK2410 and SMDK2440
config ARCH_SMDK2410
bool "SMDK2410/A9M2410"
select CPU_S3C2410
select MACH_SMDK
help
Say Y here if you are using the SMDK2410 or the derived module A9M2410
<http://www.fsforth.de>
@ -60,6 +66,7 @@ config ARCH_SMDK2410
config ARCH_S3C2440
bool "SMDK2440"
select CPU_S3C2440
select MACH_SMDK
help
Say Y here if you are using the SMDK2440.

2
arch/arm/mach-s3c2410/Makefile
View File

@ -48,3 +48,5 @@ obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o
obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o
obj-$(CONFIG_MACH_OTOM) += mach-otom.o
obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
obj-$(CONFIG_MACH_SMDK) += common-smdk.o

2
arch/arm/mach-s3c2410/clock.c
View File

@ -249,7 +249,7 @@ static int s3c24xx_upll_enable(struct clk *clk, int enable)
/* if we started the UPLL, then allow to settle */
if (enable && !(orig & S3C2410_CLKSLOW_UCLK_OFF))
if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
udelay(200);
return 0;

134
arch/arm/mach-s3c2410/common-smdk.c Normal file
View File

@ -0,0 +1,134 @@
/* linux/arch/arm/mach-s3c2410/common-smdk.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Common code for SMDK2410 and SMDK2440 boards
*
* http://www.fluff.org/ben/smdk2440/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/nand.h>
#include "devs.h"
#include "pm.h"
/* NAND parititon from 2.4.18-swl5 */
static struct mtd_partition smdk_default_nand_part[] = {
[0] = {
.name = "Boot Agent",
.size = SZ_16K,
.offset = 0,
},
[1] = {
.name = "S3C2410 flash parition 1",
.offset = 0,
.size = SZ_2M,
},
[2] = {
.name = "S3C2410 flash partition 2",
.offset = SZ_4M,
.size = SZ_4M,
},
[3] = {
.name = "S3C2410 flash partition 3",
.offset = SZ_8M,
.size = SZ_2M,
},
[4] = {
.name = "S3C2410 flash partition 4",
.offset = SZ_1M * 10,
.size = SZ_4M,
},
[5] = {
.name = "S3C2410 flash partition 5",
.offset = SZ_1M * 14,
.size = SZ_1M * 10,
},
[6] = {
.name = "S3C2410 flash partition 6",
.offset = SZ_1M * 24,
.size = SZ_1M * 24,
},
[7] = {
.name = "S3C2410 flash partition 7",
.offset = SZ_1M * 48,
.size = SZ_16M,
}
};
static struct s3c2410_nand_set smdk_nand_sets[] = {
[0] = {
.name = "NAND",
.nr_chips = 1,
.nr_partitions = ARRAY_SIZE(smdk_default_nand_part),
.partitions = smdk_default_nand_part,
},
};
/* choose a set of timings which should suit most 512Mbit
* chips and beyond.
*/
static struct s3c2410_platform_nand smdk_nand_info = {
.tacls = 20,
.twrph0 = 60,
.twrph1 = 20,
.nr_sets = ARRAY_SIZE(smdk_nand_sets),
.sets = smdk_nand_sets,
};
/* devices we initialise */
static struct platform_device __initdata *smdk_devs[] = {
&s3c_device_nand,
};
void __init smdk_machine_init(void)
{
/* Configure the LEDs (even if we have no LED support)*/
s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP);
s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP);
s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP);
s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP);
s3c2410_gpio_setpin(S3C2410_GPF4, 1);
s3c2410_gpio_setpin(S3C2410_GPF5, 1);
s3c2410_gpio_setpin(S3C2410_GPF6, 1);
s3c2410_gpio_setpin(S3C2410_GPF7, 1);
s3c_device_nand.dev.platform_data = &smdk_nand_info;
platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
s3c2410_pm_init();
}

15
arch/arm/mach-s3c2410/common-smdk.h Normal file
View File

@ -0,0 +1,15 @@
/* linux/arch/arm/mach-s3c2410/common-smdk.h
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Common code for SMDK2410 and SMDK2440 boards
*
* http://www.fluff.org/ben/smdk2440/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
extern void smdk_machine_init(void);

4
arch/arm/mach-s3c2410/mach-anubis.c
View File

@ -232,8 +232,8 @@ static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
static struct s3c2410_platform_nand anubis_nand_info = {
.tacls = 25,
.twrph0 = 80,
.twrph1 = 80,
.twrph0 = 55,
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(anubis_nand_sets),
.sets = anubis_nand_sets,
.select_chip = anubis_nand_select,

35
arch/arm/mach-s3c2410/mach-rx3715.c
View File

@ -32,6 +32,11 @@
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
@ -46,6 +51,7 @@
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-lcd.h>
#include <asm/arch/nand.h>
#include <asm/arch/fb.h>
#include "clock.h"
@ -170,12 +176,39 @@ static struct s3c2410fb_mach_info rx3715_lcdcfg __initdata = {
},
};
static struct mtd_partition rx3715_nand_part[] = {
[0] = {
.name = "Whole Flash",
.offset = 0,
.size = MTDPART_SIZ_FULL,
.mask_flags = MTD_WRITEABLE,
}
};
static struct s3c2410_nand_set rx3715_nand_sets[] = {
[0] = {
.name = "Internal",
.nr_chips = 1,
.nr_partitions = ARRAY_SIZE(rx3715_nand_part),
.partitions = rx3715_nand_part,
},
};
static struct s3c2410_platform_nand rx3715_nand_info = {
.tacls = 25,
.twrph0 = 50,
.twrph1 = 15,
.nr_sets = ARRAY_SIZE(rx3715_nand_sets),
.sets = rx3715_nand_sets,
};
static struct platform_device *rx3715_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_iis,
&s3c_device_nand,
};
static struct s3c24xx_board rx3715_board __initdata = {
@ -185,6 +218,8 @@ static struct s3c24xx_board rx3715_board __initdata = {
static void __init rx3715_map_io(void)
{
s3c_device_nand.dev.platform_data = &rx3715_nand_info;
s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));

13
arch/arm/mach-s3c2410/mach-smdk2410.c
View File

@ -28,7 +28,8 @@
* Ben Dooks <ben@simtec.co.uk>
*
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 20-Sep-2005 BJD Added static to non-exported items
* 20-Sep-2005 BJD Added static to non-exported items
* 01-Apr-2006 BJD Moved init code to common smdk
*
***********************************************************************/
@ -54,6 +55,8 @@
#include "devs.h"
#include "cpu.h"
#include "common-smdk.h"
static struct map_desc smdk2410_iodesc[] __initdata = {
/* nothing here yet */
};
@ -107,11 +110,6 @@ static void __init smdk2410_map_io(void)
s3c24xx_set_board(&smdk2410_board);
}
static void __init smdk2410_init_irq(void)
{
s3c24xx_init_irq();
}
MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
* to SMDK2410 */
/* Maintainer: Jonas Dietsche */
@ -119,7 +117,8 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = smdk2410_map_io,
.init_irq = smdk2410_init_irq,
.init_irq = s3c24xx_init_irq,
.init_machine = smdk_machine_init,
.timer = &s3c24xx_timer,
MACHINE_END

17
arch/arm/mach-s3c2410/mach-smdk2440.c
View File

@ -53,7 +53,8 @@
#include "clock.h"
#include "devs.h"
#include "cpu.h"
#include "pm.h"
#include "common-smdk.h"
static struct map_desc smdk2440_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
@ -197,21 +198,9 @@ static void __init smdk2440_map_io(void)
static void __init smdk2440_machine_init(void)
{
/* Configure the LEDs (even if we have no LED support)*/
s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP);
s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP);
s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP);
s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP);
s3c2410_gpio_setpin(S3C2410_GPF4, 0);
s3c2410_gpio_setpin(S3C2410_GPF5, 0);
s3c2410_gpio_setpin(S3C2410_GPF6, 0);
s3c2410_gpio_setpin(S3C2410_GPF7, 0);
s3c24xx_fb_set_platdata(&smdk2440_lcd_cfg);
s3c2410_pm_init();
smdk_machine_init();
}
MACHINE_START(S3C2440, "SMDK2440")

72
arch/arm/mach-sa1100/collie.c
View File

@ -11,7 +11,8 @@
* published by the Free Software Foundation.
*
* ChangeLog:
* 03-06-2004 John Lenz <jelenz@wisc.edu>
* 2006 Pavel Machek <pavel@suse.cz>
* 03-06-2004 John Lenz <lenz@cs.wisc.edu>
* 06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
* 04-16-2001 Lineo Japan,Inc. ...
*/
@ -87,12 +88,75 @@ static struct mcp_plat_data collie_mcp_data = {
.sclk_rate = 11981000,
};
#ifdef CONFIG_SHARP_LOCOMO
/*
* low-level UART features.
*/
static struct locomo_dev *uart_dev = NULL;
static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl)
{
if (!uart_dev) return;
if (mctrl & TIOCM_RTS)
locomo_gpio_write(uart_dev, LOCOMO_GPIO_RTS, 0);
else
locomo_gpio_write(uart_dev, LOCOMO_GPIO_RTS, 1);
if (mctrl & TIOCM_DTR)
locomo_gpio_write(uart_dev, LOCOMO_GPIO_DTR, 0);
else
locomo_gpio_write(uart_dev, LOCOMO_GPIO_DTR, 1);
}
static u_int collie_uart_get_mctrl(struct uart_port *port)
{
int ret = TIOCM_CD;
unsigned int r;
if (!uart_dev) return ret;
r = locomo_gpio_read_output(uart_dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR);
if (r & LOCOMO_GPIO_CTS)
ret |= TIOCM_CTS;
if (r & LOCOMO_GPIO_DSR)
ret |= TIOCM_DSR;
return ret;
}
static struct sa1100_port_fns collie_port_fns __initdata = {
.set_mctrl = collie_uart_set_mctrl,
.get_mctrl = collie_uart_get_mctrl,
};
static int collie_uart_probe(struct locomo_dev *dev)
{
uart_dev = dev;
return 0;
}
static int collie_uart_remove(struct locomo_dev *dev)
{
uart_dev = NULL;
return 0;
}
static struct locomo_driver collie_uart_driver = {
.drv = {
.name = "collie_uart",
},
.devid = LOCOMO_DEVID_UART,
.probe = collie_uart_probe,
.remove = collie_uart_remove,
};
static int __init collie_uart_init(void) {
return locomo_driver_register(&collie_uart_driver);
}
device_initcall(collie_uart_init);
#endif
static struct resource locomo_resources[] = {
[0] = {
@ -218,6 +282,12 @@ static void __init collie_map_io(void)
{
sa1100_map_io();
iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc));
#ifdef CONFIG_SHARP_LOCOMO
sa1100_register_uart_fns(&collie_port_fns);
#endif
sa1100_register_uart(0, 3);
sa1100_register_uart(1, 1);
}
MACHINE_START(COLLIE, "Sharp-Collie")

17
arch/arm/mm/consistent.c
View File

@ -18,6 +18,7 @@
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <asm/memory.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <asm/sizes.h>
@ -272,6 +273,17 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
void *
dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
{
if (arch_is_coherent()) {
void *virt;
virt = kmalloc(size, gfp);
if (!virt)
return NULL;
*handle = virt_to_dma(dev, virt);
return virt;
}
return __dma_alloc(dev, size, handle, gfp,
pgprot_noncached(pgprot_kernel));
}
@ -350,6 +362,11 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
WARN_ON(irqs_disabled());
if (arch_is_coherent()) {
kfree(cpu_addr);
return;
}
size = PAGE_ALIGN(size);
spin_lock_irqsave(&consistent_lock, flags);

11
arch/arm/mm/mm-armv.c
View File

@ -388,6 +388,17 @@ void __init build_mem_type_table(void)
cp = &cache_policies[cachepolicy];
kern_pgprot = user_pgprot = cp->pte;
/*
* Enable CPU-specific coherency if supported.
* (Only available on XSC3 at the moment.)
*/
if (arch_is_coherent()) {
if (cpu_is_xsc3()) {
mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY].prot_pte |= L_PTE_COHERENT;
}
}
/*
* ARMv6 and above have extended page tables.
*/

2
arch/arm/mm/proc-xsc3.S
View File

@ -371,7 +371,7 @@ ENTRY(cpu_xsc3_switch_mm)
ENTRY(cpu_xsc3_set_pte)
str r1, [r0], #-2048 @ linux version
bic r2, r1, #0xff0
bic r2, r1, #0xdf0 @ Keep C, B, coherency bits
orr r2, r2, #PTE_TYPE_EXT @ extended page
eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY

4
arch/arm/plat-omap/Kconfig
View File

@ -70,13 +70,13 @@ config OMAP_MPU_TIMER
config OMAP_32K_TIMER
bool "Use 32KHz timer"
depends on ARCH_OMAP16XX
depends on ARCH_OMAP16XX || ARCH_OMAP24XX
help
Select this option if you want to enable the OMAP 32KHz timer.
This timer saves power compared to the OMAP_MPU_TIMER, and has
support for no tick during idle. The 32KHz timer provides less
intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
currently only available for OMAP-16xx.
currently only available for OMAP16XX and 24XX.
endchoice

6
arch/arm/plat-omap/Makefile
View File

@ -3,16 +3,16 @@
#
# Common support
obj-y := common.o sram.o sram-fn.o clock.o devices.o dma.o mux.o gpio.o mcbsp.o usb.o
obj-y := common.o sram.o sram-fn.o clock.o devices.o dma.o mux.o gpio.o mcbsp.o usb.o fb.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o
# OCPI interconnect support for 1710, 1610 and 5912
obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
# Power Management
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o

67
arch/arm/plat-omap/clock.c
View File

@ -21,6 +21,7 @@
#include <linux/string.h>
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/semaphore.h>
@ -37,17 +38,37 @@ static struct clk_functions *arch_clock;
* Standard clock functions defined in include/linux/clk.h
*-------------------------------------------------------------------------*/
/*
* Returns a clock. Note that we first try to use device id on the bus
* and clock name. If this fails, we try to use clock name only.
*/
struct clk * clk_get(struct device *dev, const char *id)
{
struct clk *p, *clk = ERR_PTR(-ENOENT);
int idno;
if (dev == NULL || dev->bus != &platform_bus_type)
idno = -1;
else
idno = to_platform_device(dev)->id;
mutex_lock(&clocks_mutex);
list_for_each_entry(p, &clocks, node) {
if (p->id == idno &&
strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
break;
}
}
list_for_each_entry(p, &clocks, node) {
if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
break;
}
}
mutex_unlock(&clocks_mutex);
return clk;
@ -59,6 +80,9 @@ int clk_enable(struct clk *clk)
unsigned long flags;
int ret = 0;
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
spin_lock_irqsave(&clockfw_lock, flags);
if (arch_clock->clk_enable)
ret = arch_clock->clk_enable(clk);
@ -72,6 +96,9 @@ void clk_disable(struct clk *clk)
{
unsigned long flags;
if (clk == NULL || IS_ERR(clk))
return;
spin_lock_irqsave(&clockfw_lock, flags);
if (arch_clock->clk_disable)
arch_clock->clk_disable(clk);
@ -84,6 +111,9 @@ int clk_get_usecount(struct clk *clk)
unsigned long flags;
int ret = 0;
if (clk == NULL || IS_ERR(clk))
return 0;
spin_lock_irqsave(&clockfw_lock, flags);
ret = clk->usecount;
spin_unlock_irqrestore(&clockfw_lock, flags);
@ -97,6 +127,9 @@ unsigned long clk_get_rate(struct clk *clk)
unsigned long flags;
unsigned long ret = 0;
if (clk == NULL || IS_ERR(clk))
return 0;
spin_lock_irqsave(&clockfw_lock, flags);
ret = clk->rate;
spin_unlock_irqrestore(&clockfw_lock, flags);
@ -121,6 +154,9 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
unsigned long flags;
long ret = 0;
if (clk == NULL || IS_ERR(clk))
return ret;
spin_lock_irqsave(&clockfw_lock, flags);
if (arch_clock->clk_round_rate)
ret = arch_clock->clk_round_rate(clk, rate);
@ -133,7 +169,10 @@ EXPORT_SYMBOL(clk_round_rate);
int clk_set_rate(struct clk *clk, unsigned long rate)
{
unsigned long flags;
int ret = 0;
int ret = -EINVAL;
if (clk == NULL || IS_ERR(clk))
return ret;
spin_lock_irqsave(&clockfw_lock, flags);
if (arch_clock->clk_set_rate)
@ -147,7 +186,10 @@ EXPORT_SYMBOL(clk_set_rate);
int clk_set_parent(struct clk *clk, struct clk *parent)
{
unsigned long flags;
int ret = 0;
int ret = -EINVAL;
if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
return ret;
spin_lock_irqsave(&clockfw_lock, flags);
if (arch_clock->clk_set_parent)
@ -163,6 +205,9 @@ struct clk *clk_get_parent(struct clk *clk)
unsigned long flags;
struct clk * ret = NULL;
if (clk == NULL || IS_ERR(clk))
return ret;
spin_lock_irqsave(&clockfw_lock, flags);
if (arch_clock->clk_get_parent)
ret = arch_clock->clk_get_parent(clk);
@ -199,6 +244,9 @@ __setup("mpurate=", omap_clk_setup);
/* Used for clocks that always have same value as the parent clock */
void followparent_recalc(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
return;
clk->rate = clk->parent->rate;
}
@ -207,6 +255,9 @@ void propagate_rate(struct clk * tclk)
{
struct clk *clkp;
if (tclk == NULL || IS_ERR(tclk))
return;
list_for_each_entry(clkp, &clocks, node) {
if (likely(clkp->parent != tclk))
continue;
@ -217,6 +268,9 @@ void propagate_rate(struct clk * tclk)
int clk_register(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
mutex_lock(&clocks_mutex);
list_add(&clk->node, &clocks);
if (clk->init)
@ -229,6 +283,9 @@ EXPORT_SYMBOL(clk_register);
void clk_unregister(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
return;
mutex_lock(&clocks_mutex);
list_del(&clk->node);
mutex_unlock(&clocks_mutex);
@ -239,6 +296,9 @@ void clk_deny_idle(struct clk *clk)
{
unsigned long flags;
if (clk == NULL || IS_ERR(clk))
return;
spin_lock_irqsave(&clockfw_lock, flags);
if (arch_clock->clk_deny_idle)
arch_clock->clk_deny_idle(clk);
@ -250,6 +310,9 @@ void clk_allow_idle(struct clk *clk)
{
unsigned long flags;
if (clk == NULL || IS_ERR(clk))
return;
spin_lock_irqsave(&clockfw_lock, flags);
if (arch_clock->clk_allow_idle)
arch_clock->clk_allow_idle(clk);

143
arch/arm/plat-omap/devices.c
View File

@ -24,6 +24,7 @@
#include <asm/arch/board.h>
#include <asm/arch/mux.h>
#include <asm/arch/gpio.h>
#include <asm/arch/menelaus.h>
void omap_nop_release(struct device *dev)
@ -97,6 +98,62 @@ static void omap_init_i2c(void)
static inline void omap_init_i2c(void) {}
#endif
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
static void omap_init_kp(void)
{
if (machine_is_omap_h2() || machine_is_omap_h3()) {
omap_cfg_reg(F18_1610_KBC0);
omap_cfg_reg(D20_1610_KBC1);
omap_cfg_reg(D19_1610_KBC2);
omap_cfg_reg(E18_1610_KBC3);
omap_cfg_reg(C21_1610_KBC4);
omap_cfg_reg(G18_1610_KBR0);
omap_cfg_reg(F19_1610_KBR1);
omap_cfg_reg(H14_1610_KBR2);
omap_cfg_reg(E20_1610_KBR3);
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
} else if (machine_is_omap_perseus2()) {
omap_cfg_reg(E2_730_KBR0);
omap_cfg_reg(J7_730_KBR1);
omap_cfg_reg(E1_730_KBR2);
omap_cfg_reg(F3_730_KBR3);
omap_cfg_reg(D2_730_KBR4);
omap_cfg_reg(C2_730_KBC0);
omap_cfg_reg(D3_730_KBC1);
omap_cfg_reg(E4_730_KBC2);
omap_cfg_reg(F4_730_KBC3);
omap_cfg_reg(E3_730_KBC4);
} else if (machine_is_omap_h4()) {
omap_cfg_reg(T19_24XX_KBR0);
omap_cfg_reg(R19_24XX_KBR1);
omap_cfg_reg(V18_24XX_KBR2);
omap_cfg_reg(M21_24XX_KBR3);
omap_cfg_reg(E5__24XX_KBR4);
if (omap_has_menelaus()) {
omap_cfg_reg(B3__24XX_KBR5);
omap_cfg_reg(AA4_24XX_KBC2);
omap_cfg_reg(B13_24XX_KBC6);
} else {
omap_cfg_reg(M18_24XX_KBR5);
omap_cfg_reg(H19_24XX_KBC2);
omap_cfg_reg(N19_24XX_KBC6);
}
omap_cfg_reg(R20_24XX_KBC0);
omap_cfg_reg(M14_24XX_KBC1);
omap_cfg_reg(V17_24XX_KBC3);
omap_cfg_reg(P21_24XX_KBC4);
omap_cfg_reg(L14_24XX_KBC5);
}
}
#else
static inline void omap_init_kp(void) {}
#endif
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
@ -240,6 +297,55 @@ static void __init omap_init_mmc(void)
static inline void omap_init_mmc(void) {}
#endif
/*-------------------------------------------------------------------------*/
/* Numbering for the SPI-capable controllers when used for SPI:
* spi = 1
* uwire = 2
* mmc1..2 = 3..4
* mcbsp1..3 = 5..7
*/
#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
#define OMAP_UWIRE_BASE 0xfffb3000
static struct resource uwire_resources[] = {
{
.start = OMAP_UWIRE_BASE,
.end = OMAP_UWIRE_BASE + 0x20,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device omap_uwire_device = {
.name = "omap_uwire",
.id = -1,
.dev = {
.release = omap_nop_release,
},
.num_resources = ARRAY_SIZE(uwire_resources),
.resource = uwire_resources,
};
static void omap_init_uwire(void)
{
/* FIXME define and use a boot tag; not all boards will be hooking
* up devices to the microwire controller, and multi-board configs
* mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
*/
/* board-specific code must configure chipselects (only a few
* are normally used) and SCLK/SDI/SDO (each has two choices).
*/
(void) platform_device_register(&omap_uwire_device);
}
#else
static inline void omap_init_uwire(void) {}
#endif
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
#ifdef CONFIG_ARCH_OMAP24XX
@ -310,40 +416,6 @@ static void omap_init_rng(void)
static inline void omap_init_rng(void) {}
#endif
#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
static struct omap_lcd_config omap_fb_conf;
static u64 omap_fb_dma_mask = ~(u32)0;
static struct platform_device omap_fb_device = {
.name = "omapfb",
.id = -1,
.dev = {
.release = omap_nop_release,
.dma_mask = &omap_fb_dma_mask,
.coherent_dma_mask = ~(u32)0,
.platform_data = &omap_fb_conf,
},
.num_resources = 0,
};
static inline void omap_init_fb(void)
{
const struct omap_lcd_config *conf;
conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
if (conf != NULL)
omap_fb_conf = *conf;
platform_device_register(&omap_fb_device);
}
#else
static inline void omap_init_fb(void) {}
#endif
/*
* This gets called after board-specific INIT_MACHINE, and initializes most
* on-chip peripherals accessible on this board (except for few like USB):
@ -369,9 +441,10 @@ static int __init omap_init_devices(void)
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
omap_init_fb();
omap_init_i2c();
omap_init_kp();
omap_init_mmc();
omap_init_uwire();
omap_init_wdt();
omap_init_rng();

6
arch/arm/plat-omap/dma.c
View File

@ -1258,6 +1258,11 @@ void omap_stop_lcd_dma(void)
omap_writew(w, OMAP1610_DMA_LCD_CTRL);
}
int omap_lcd_dma_ext_running(void)
{
return lcd_dma.ext_ctrl && lcd_dma.active;
}
/*----------------------------------------------------------------------------*/
static int __init omap_init_dma(void)
@ -1389,6 +1394,7 @@ EXPORT_SYMBOL(omap_free_lcd_dma);
EXPORT_SYMBOL(omap_enable_lcd_dma);
EXPORT_SYMBOL(omap_setup_lcd_dma);
EXPORT_SYMBOL(omap_stop_lcd_dma);
EXPORT_SYMBOL(omap_lcd_dma_ext_running);
EXPORT_SYMBOL(omap_set_lcd_dma_b1);
EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);

26
arch/arm/plat-omap/dmtimer.c
View File

@ -97,6 +97,32 @@ int omap_dm_timers_active(void)
}
/**
* omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR
* @inputmask: current value of idlect mask
*/
__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
{
int n;
/* If ARMXOR cannot be idled this function call is unnecessary */
if (!(inputmask & (1 << 1)))
return inputmask;
/* If any active timer is using ARMXOR return modified mask */
for (n = 0; dm_timers[n].base; ++n)
if (omap_dm_timer_read_reg(&dm_timers[n], OMAP_TIMER_CTRL_REG)&
OMAP_TIMER_CTRL_ST) {
if (((omap_readl(MOD_CONF_CTRL_1)>>(n*2)) & 0x03) == 0)
inputmask &= ~(1 << 1);
else
inputmask &= ~(1 << 2);
}
return inputmask;
}
void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
int n = (timer - dm_timers) << 1;

80
arch/arm/plat-omap/fb.c Normal file
View File

@ -0,0 +1,80 @@
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/bootmem.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/arch/board.h>
#include <asm/arch/sram.h>
#include <asm/arch/omapfb.h>
#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
static struct omapfb_platform_data omapfb_config;
static u64 omap_fb_dma_mask = ~(u32)0;
static struct platform_device omap_fb_device = {
.name = "omapfb",
.id = -1,
.dev = {
.dma_mask = &omap_fb_dma_mask,
.coherent_dma_mask = ~(u32)0,
.platform_data = &omapfb_config,
},
.num_resources = 0,
};
/* called from map_io */
void omapfb_reserve_mem(void)
{
const struct omap_fbmem_config *fbmem_conf;
omapfb_config.fbmem.fb_sram_start = omap_fb_sram_start;
omapfb_config.fbmem.fb_sram_size = omap_fb_sram_size;
fbmem_conf = omap_get_config(OMAP_TAG_FBMEM, struct omap_fbmem_config);
if (fbmem_conf != NULL) {
/* indicate that the bootloader already initialized the
* fb device, so we'll skip that part in the fb driver
*/
omapfb_config.fbmem.fb_sdram_start = fbmem_conf->fb_sdram_start;
omapfb_config.fbmem.fb_sdram_size = fbmem_conf->fb_sdram_size;
if (fbmem_conf->fb_sdram_size) {
pr_info("Reserving %u bytes SDRAM for frame buffer\n",
fbmem_conf->fb_sdram_size);
reserve_bootmem(fbmem_conf->fb_sdram_start,
fbmem_conf->fb_sdram_size);
}
}
}
static inline int omap_init_fb(void)
{
const struct omap_lcd_config *conf;
conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
if (conf == NULL)
return 0;
omapfb_config.lcd = *conf;
return platform_device_register(&omap_fb_device);
}
arch_initcall(omap_init_fb);
#else
void omapfb_reserve_mem(void) {}
#endif

Some files were not shown because too many files have changed in this diff Show More