AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

serial: vt8500: UART uses gated clock rather than 24Mhz reference

Browse Source 
UART modules on Wondermedia SoCs are connected via a gated clock
source, rather than directly to the 24Mhz reference clock. While
uboot enables UART0 for debugging, other UART ports are unavailable
until the clock is enabled.

This patch checks that a valid clock is actually passed from devicetree,
enables the clock in probe. This change removes the fallback when a
clock was not specified as it doesn't apply any longer (and would only
work if the UART clock was already enabled).

DTSI files are updated for VT8500, WM8505 and WM8650.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Tony Prisk 2013-01-18 15:05:31 +13:00 committed by Greg Kroah-Hartman
parent 962963e4ee
commit 12faa35ae5
4 changed files with 127 additions and 27 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

40
arch/arm/boot/dts/vt8500.dtsi
View File

@ -45,6 +45,38 @@ ref24: ref24M {
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
clkuart0: uart0 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x250>;
enable-bit = <1>;
};
clkuart1: uart1 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x250>;
enable-bit = <2>;
};
clkuart2: uart2 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x250>;
enable-bit = <3>;
};
clkuart3: uart3 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x250>;
enable-bit = <4>;
};
};
};
@ -83,28 +115,28 @@ uart@d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&ref24>;
clocks = <&clkuart0>;
};
uart@d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
clocks = <&ref24>;
clocks = <&clkuart1>;
};
uart@d8210000 {
compatible = "via,vt8500-uart";
reg = <0xd8210000 0x1040>;
interrupts = <47>;
clocks = <&ref24>;
clocks = <&clkuart2>;
};
uart@d82c0000 {
compatible = "via,vt8500-uart";
reg = <0xd82c0000 0x1040>;
interrupts = <50>;
clocks = <&ref24>;
clocks = <&clkuart3>;
};
rtc@d8100000 {

60
arch/arm/boot/dts/wm8505.dtsi
View File

@ -59,6 +59,54 @@ ref24: ref24M {
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
clkuart0: uart0 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x250>;
enable-bit = <1>;
};
clkuart1: uart1 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x250>;
enable-bit = <2>;
};
clkuart2: uart2 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x250>;
enable-bit = <3>;
};
clkuart3: uart3 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x250>;
enable-bit = <4>;
};
clkuart4: uart4 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x250>;
enable-bit = <22>;
};
clkuart5: uart5 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x250>;
enable-bit = <23>;
};
};
};
@ -96,42 +144,42 @@ uart@d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&ref24>;
clocks = <&clkuart0>;
};
uart@d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
clocks = <&ref24>;
clocks = <&clkuart1>;
};
uart@d8210000 {
compatible = "via,vt8500-uart";
reg = <0xd8210000 0x1040>;
interrupts = <47>;
clocks = <&ref24>;
clocks = <&clkuart2>;
};
uart@d82c0000 {
compatible = "via,vt8500-uart";
reg = <0xd82c0000 0x1040>;
interrupts = <50>;
clocks = <&ref24>;
clocks = <&clkuart3>;
};
uart@d8370000 {
compatible = "via,vt8500-uart";
reg = <0xd8370000 0x1040>;
interrupts = <31>;
clocks = <&ref24>;
clocks = <&clkuart4>;
};
uart@d8380000 {
compatible = "via,vt8500-uart";
reg = <0xd8380000 0x1040>;
interrupts = <30>;
clocks = <&ref24>;
clocks = <&clkuart5>;
};
rtc@d8100000 {

20
arch/arm/boot/dts/wm8650.dtsi
View File

@ -75,6 +75,22 @@ pllb: pllb {
reg = <0x204>;
};
clkuart0: uart0 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x250>;
enable-bit = <1>;
};
clkuart1: uart1 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
clocks = <&ref24>;
enable-reg = <0x250>;
enable-bit = <2>;
};
arm: arm {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
@ -128,14 +144,14 @@ uart@d8200000 {
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
clocks = <&ref24>;
clocks = <&clkuart0>;
};
uart@d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
clocks = <&ref24>;
clocks = <&clkuart1>;
};
rtc@d8100000 {

34
drivers/tty/serial/vt8500_serial.c
View File

@ -584,6 +584,23 @@ static int vt8500_serial_probe(struct platform_device *pdev)
if (!vt8500_port)
return -ENOMEM;
vt8500_port->uart.membase = devm_request_and_ioremap(&pdev->dev, mmres);
if (!vt8500_port->uart.membase)
return -EADDRNOTAVAIL;
vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
if (IS_ERR(vt8500_port->clk)) {
dev_err(&pdev->dev, "failed to get clock\n");
ret = -EINVAL;
goto err;
}
ret = clk_prepare_enable(vt8500_port->clk);
if (ret) {
dev_err(&pdev->dev, "failed to enable clock\n");
goto err;
}
vt8500_port->uart.type = PORT_VT8500;
vt8500_port->uart.iotype = UPIO_MEM;
vt8500_port->uart.mapbase = mmres->start;
@ -593,25 +610,11 @@ static int vt8500_serial_probe(struct platform_device *pdev)
vt8500_port->uart.line = port;
vt8500_port->uart.dev = &pdev->dev;
vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
if (vt8500_port->clk) {
vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
} else {
/* use the default of 24Mhz if not specified and warn */
pr_warn("%s: serial clock source not specified\n", __func__);
vt8500_port->uart.uartclk = 24000000;
}
vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
snprintf(vt8500_port->name, sizeof(vt8500_port->name),
"VT8500 UART%d", pdev->id);
vt8500_port->uart.membase = devm_request_and_ioremap(&pdev->dev, mmres);
if (!vt8500_port->uart.membase) {
ret = -EADDRNOTAVAIL;
goto err;
}
vt8500_uart_ports[port] = vt8500_port;
uart_add_one_port(&vt8500_uart_driver, &vt8500_port->uart);
@ -630,6 +633,7 @@ static int vt8500_serial_remove(struct platform_device *pdev)
struct vt8500_port *vt8500_port = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, NULL);
clk_disable_unprepare(vt8500_port->clk);
uart_remove_one_port(&vt8500_uart_driver, &vt8500_port->uart);
kfree(vt8500_port);