AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

ARM: OMAP1: Make omap1 use MMC multislot structures

Browse Source 
Make omap1 use new MMC multislot structures. The related MMC
patches will be sent separately.

Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Anderson Briglia <anderson.briglia@indt.org.br>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: David Cohen <david.cohen@indt.org.br>
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Felipe Balbi 2007-11-27 00:01:45 -04:00 committed by Tony Lindgren
parent 6e2d410724
commit 138ab9f832
9 changed files with 313 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

60
arch/arm/configs/omap_h2_1610_defconfig
View File

@ -74,12 +74,20 @@ CONFIG_SLAB=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
@ -358,8 +366,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@ -408,6 +428,10 @@ CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
@ -463,7 +487,15 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
@ -472,6 +504,10 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
@ -480,6 +516,10 @@ CONFIG_SMC91X=y
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
#
# Token Ring devices
#
#
# Wireless LAN
#
@ -505,6 +545,10 @@ CONFIG_SLHC=y
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
@ -541,6 +585,7 @@ CONFIG_INPUT_MISC=y
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_POLLDEV is not set
#
# Hardware I/O ports
@ -575,6 +620,10 @@ CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
@ -588,6 +637,10 @@ CONFIG_WATCHDOG_NOWAYOUT=y
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
@ -771,8 +824,9 @@ CONFIG_DNOTIFY=y
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_VFAT_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
@ -838,7 +892,7 @@ CONFIG_MSDOS_PARTITION=y
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
@ -862,7 +916,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set

4
arch/arm/mach-omap1/Makefile
View File

@ -13,13 +13,13 @@ obj-$(CONFIG_PM) += pm.o sleep.o
led-y := leds.o
# Specific board support
obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o
obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o board-h2-mmc.o
obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o
obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o
obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o
obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o
obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o
obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o
obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o
obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o

110
arch/arm/mach-omap1/board-h2-mmc.c Normal file
View File

@ -0,0 +1,110 @@
/*
* linux/arch/arm/mach-omap1/board-h2-mmc.c
*
* Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
* Author: Felipe Balbi <felipe.lima@indt.org.br>
*
* This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is:
* Copyright (C) 2006 Nokia Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <asm/arch/mmc.h>
#include <asm/arch/gpio.h>
#ifdef CONFIG_MMC_OMAP
static int slot_cover_open;
static struct device *mmc_device;
static int h2_mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
#ifdef CONFIG_MMC_DEBUG
dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
power_on ? "on" : "off", vdd);
#endif
if (slot != 0) {
dev_err(dev, "No such slot %d\n", slot + 1);
return -ENODEV;
}
return 0;
}
static int h2_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
{
#ifdef CONFIG_MMC_DEBUG
dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1,
bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
#endif
if (slot != 0) {
dev_err(dev, "No such slot %d\n", slot + 1);
return -ENODEV;
}
return 0;
}
static int h2_mmc_get_cover_state(struct device *dev, int slot)
{
BUG_ON(slot != 0);
return slot_cover_open;
}
void h2_mmc_slot_cover_handler(void *arg, int state)
{
if (mmc_device == NULL)
return;
slot_cover_open = state;
omap_mmc_notify_cover_event(mmc_device, 0, state);
}
static int h2_mmc_late_init(struct device *dev)
{
int ret = 0;
mmc_device = dev;
return ret;
}
static void h2_mmc_cleanup(struct device *dev)
{
}
static struct omap_mmc_platform_data h2_mmc_data = {
.nr_slots = 1,
.switch_slot = NULL,
.init = h2_mmc_late_init,
.cleanup = h2_mmc_cleanup,
.slots[0] = {
.set_power = h2_mmc_set_power,
.set_bus_mode = h2_mmc_set_bus_mode,
.get_ro = NULL,
.get_cover_state = h2_mmc_get_cover_state,
.ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 |
MMC_VDD_32_33 | MMC_VDD_33_34,
.name = "mmcblk",
},
};
void __init h2_mmc_init(void)
{
omap_set_mmc_info(1, &h2_mmc_data);
}
#else
void __init h2_mmc_init(void)
{
}
void h2_mmc_slot_cover_handler(void *arg, int state)
{
}
#endif

10
arch/arm/mach-omap1/board-h2.c
View File

@ -389,15 +389,14 @@ static struct omap_usb_config h2_usb_config __initdata = {
};
static struct omap_mmc_config h2_mmc_config __initdata = {
.mmc [0] = {
.enabled = 1,
.mmc[0] = {
.enabled = 1,
.wire4 = 1,
.wp_pin = OMAP_MPUIO(3),
.power_pin = -1, /* tps65010 gpio3 */
.switch_pin = OMAP_MPUIO(1),
},
};
extern struct omap_mmc_platform_data h2_mmc_data;
static struct omap_uart_config h2_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
@ -459,6 +458,7 @@ static void __init h2_init(void)
omap_board_config = h2_config;
omap_board_config_size = ARRAY_SIZE(h2_config);
omap_serial_init();
h2_mmc_init();
/* irq for tps65010 chip */
omap_cfg_reg(W4_GPIO58);

114
arch/arm/mach-omap1/board-h3-mmc.c Normal file
View File

@ -0,0 +1,114 @@
/*
* linux/arch/arm/mach-omap1/board-h3-mmc.c
*
* Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
* Author: Felipe Balbi <felipe.lima@indt.org.br>
*
* This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is:
* Copyright (C) 2006 Nokia Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <asm/arch/mmc.h>
#include <asm/arch/gpio.h>
#ifdef CONFIG_MMC_OMAP
static int slot_cover_open;
static struct device *mmc_device;
static int h3_mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
#ifdef CONFIG_MMC_DEBUG
dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
power_on ? "on" : "off", vdd);
#endif
if (slot != 0) {
dev_err(dev, "No such slot %d\n", slot + 1);
return -ENODEV;
}
return 0;
}
static int h3_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
{
int ret = 0;
#ifdef CONFIG_MMC_DEBUG
dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1,
bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
#endif
if (slot != 0) {
dev_err(dev, "No such slot %d\n", slot + 1);
return -ENODEV;
}
/* Treated on upper level */
return bus_mode;
}
static int h3_mmc_get_cover_state(struct device *dev, int slot)
{
BUG_ON(slot != 0);
return slot_cover_open;
}
void h3_mmc_slot_cover_handler(void *arg, int state)
{
if (mmc_device == NULL)
return;
slot_cover_open = state;
omap_mmc_notify_cover_event(mmc_device, 0, state);
}
static int h3_mmc_late_init(struct device *dev)
{
int ret = 0;
mmc_device = dev;
return ret;
}
static void h3_mmc_cleanup(struct device *dev)
{
}
static struct omap_mmc_platform_data h3_mmc_data = {
.nr_slots = 1,
.switch_slot = NULL,
.init = h3_mmc_late_init,
.cleanup = h3_mmc_cleanup,
.slots[0] = {
.set_power = h3_mmc_set_power,
.set_bus_mode = h3_mmc_set_bus_mode,
.get_ro = NULL,
.get_cover_state = h3_mmc_get_cover_state,
.ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 |
MMC_VDD_32_33 | MMC_VDD_33_34,
.name = "mmcblk",
},
};
void __init h3_mmc_init(void)
{
omap_set_mmc_info(1, &h3_mmc_data);
}
#else
void __init h3_mmc_init(void)
{
}
void h3_mmc_slot_cover_handler(void *arg, int state)
{
}
#endif

22
arch/arm/mach-omap1/board-h3.c
View File

@ -437,12 +437,13 @@ static struct omap_usb_config h3_usb_config __initdata = {
static struct omap_mmc_config h3_mmc_config __initdata = {
.mmc[0] = {
.enabled = 1,
.power_pin = -1, /* tps65010 GPIO4 */
.switch_pin = OMAP_MPUIO(1),
},
.enabled = 1,
.wire4 = 1,
},
};
extern struct omap_mmc_platform_data h3_mmc_data;
static struct omap_uart_config h3_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
@ -471,6 +472,18 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = {
*/
};
static struct omap_gpio_switch h3_gpio_switches[] __initdata = {
{
.name = "mmc_slot",
.gpio = OMAP_MPUIO(1),
.type = OMAP_GPIO_SWITCH_TYPE_COVER,
.debounce_rising = 100,
.debounce_falling = 0,
.notify = h3_mmc_slot_cover_handler,
.notify_data = NULL,
},
};
#define H3_NAND_RB_GPIO_PIN 10
static int nand_dev_ready(struct omap_nand_platform_data *data)
@ -504,6 +517,7 @@ static void __init h3_init(void)
omap_board_config = h3_config;
omap_board_config_size = ARRAY_SIZE(h3_config);
omap_serial_init();
h3_mmc_init();
/* FIXME setup irq for tps65013 chip */
i2c_register_board_info(1, h3_i2c_board_info,

2
include/asm-arm/arch-omap/board-apollon.h
View File

@ -29,6 +29,8 @@
#ifndef __ASM_ARCH_OMAP_APOLLON_H
#define __ASM_ARCH_OMAP_APOLLON_H
extern void apollon_mmc_init(void);
/* Placeholder for APOLLON specific defines */
#define APOLLON_ETHR_GPIO_IRQ 74

3
include/asm-arm/arch-omap/board-h2.h
View File

@ -34,5 +34,8 @@
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define OMAP1610_ETHR_START 0x04000300
extern void h2_mmc_init(void);
extern void h2_mmc_slot_cover_handler(void *arg, int state);
#endif /* __ASM_ARCH_OMAP_H2_H */

2
include/asm-arm/arch-omap/board-h3.h
View File

@ -36,5 +36,7 @@
#define NR_IRQS (MAXIRQNUM + 1)
extern void __init h3_mmc_init(void);
extern void h3_mmc_slot_cover_handler(void *arg, int state);
#endif /* __ASM_ARCH_OMAP_H3_H */