forked from luck/tmp_suning_uos_patched
phy: ti-pipe3: Introduce mode property in driver data
Introduce a mode property in the driver data so that we don't have to keep using "of_device_is_compatible()" throughtout the driver. No functional change. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This commit is contained in:
parent
e6577cb510
commit
22940823f0
|
@ -110,6 +110,10 @@
|
|||
#define PLL_IDLE_TIME 100 /* in milliseconds */
|
||||
#define PLL_LOCK_TIME 100 /* in milliseconds */
|
||||
|
||||
enum pipe3_mode { PIPE3_MODE_PCIE = 1,
|
||||
PIPE3_MODE_SATA,
|
||||
PIPE3_MODE_USBSS };
|
||||
|
||||
struct pipe3_dpll_params {
|
||||
u16 m;
|
||||
u8 n;
|
||||
|
@ -141,6 +145,7 @@ struct ti_pipe3 {
|
|||
unsigned int power_reg; /* power reg. index within syscon */
|
||||
unsigned int pcie_pcs_reg; /* pcs reg. index in syscon */
|
||||
bool sata_refclk_enabled;
|
||||
enum pipe3_mode mode;
|
||||
};
|
||||
|
||||
static struct pipe3_dpll_map dpll_map_usb[] = {
|
||||
|
@ -163,6 +168,25 @@ static struct pipe3_dpll_map dpll_map_sata[] = {
|
|||
{ }, /* Terminator */
|
||||
};
|
||||
|
||||
struct pipe3_data {
|
||||
enum pipe3_mode mode;
|
||||
struct pipe3_dpll_map *dpll_map;
|
||||
};
|
||||
|
||||
static struct pipe3_data data_usb = {
|
||||
.mode = PIPE3_MODE_USBSS,
|
||||
.dpll_map = dpll_map_usb,
|
||||
};
|
||||
|
||||
static struct pipe3_data data_sata = {
|
||||
.mode = PIPE3_MODE_SATA,
|
||||
.dpll_map = dpll_map_sata,
|
||||
};
|
||||
|
||||
static struct pipe3_data data_pcie = {
|
||||
.mode = PIPE3_MODE_PCIE,
|
||||
};
|
||||
|
||||
static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset)
|
||||
{
|
||||
return __raw_readl(addr + offset);
|
||||
|
@ -340,7 +364,7 @@ static int ti_pipe3_init(struct phy *x)
|
|||
* as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table
|
||||
* 18-1804.
|
||||
*/
|
||||
if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
|
||||
if (phy->mode == PIPE3_MODE_PCIE) {
|
||||
if (!phy->pcs_syscon) {
|
||||
omap_control_pcie_pcs(phy->control_dev, 0x96);
|
||||
return 0;
|
||||
|
@ -367,8 +391,7 @@ static int ti_pipe3_init(struct phy *x)
|
|||
|
||||
/* SATA has issues if re-programmed when locked */
|
||||
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
|
||||
if ((val & PLL_LOCK) && of_device_is_compatible(phy->dev->of_node,
|
||||
"ti,phy-pipe3-sata"))
|
||||
if ((val & PLL_LOCK) && phy->mode == PIPE3_MODE_SATA)
|
||||
return ret;
|
||||
|
||||
/* Program the DPLL */
|
||||
|
@ -390,12 +413,11 @@ static int ti_pipe3_exit(struct phy *x)
|
|||
/* If dpll_reset_syscon is not present we wont power down SATA DPLL
|
||||
* due to Errata i783
|
||||
*/
|
||||
if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata") &&
|
||||
!phy->dpll_reset_syscon)
|
||||
if (phy->mode == PIPE3_MODE_SATA && !phy->dpll_reset_syscon)
|
||||
return 0;
|
||||
|
||||
/* PCIe doesn't have internal DPLL */
|
||||
if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
|
||||
if (phy->mode != PIPE3_MODE_PCIE) {
|
||||
/* Put DPLL in IDLE mode */
|
||||
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
|
||||
val |= PLL_IDLE;
|
||||
|
@ -418,7 +440,7 @@ static int ti_pipe3_exit(struct phy *x)
|
|||
}
|
||||
|
||||
/* i783: SATA needs control bit toggle after PLL unlock */
|
||||
if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata")) {
|
||||
if (phy->mode == PIPE3_MODE_SATA) {
|
||||
regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
|
||||
SATA_PLL_SOFT_RESET, SATA_PLL_SOFT_RESET);
|
||||
regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
|
||||
|
@ -443,7 +465,6 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
|
|||
{
|
||||
struct clk *clk;
|
||||
struct device *dev = phy->dev;
|
||||
struct device_node *node = dev->of_node;
|
||||
|
||||
phy->refclk = devm_clk_get(dev, "refclk");
|
||||
if (IS_ERR(phy->refclk)) {
|
||||
|
@ -451,11 +472,11 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
|
|||
/* older DTBs have missing refclk in SATA PHY
|
||||
* so don't bail out in case of SATA PHY.
|
||||
*/
|
||||
if (!of_device_is_compatible(node, "ti,phy-pipe3-sata"))
|
||||
if (phy->mode != PIPE3_MODE_SATA)
|
||||
return PTR_ERR(phy->refclk);
|
||||
}
|
||||
|
||||
if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
|
||||
if (phy->mode != PIPE3_MODE_SATA) {
|
||||
phy->wkupclk = devm_clk_get(dev, "wkupclk");
|
||||
if (IS_ERR(phy->wkupclk)) {
|
||||
dev_err(dev, "unable to get wkupclk\n");
|
||||
|
@ -465,8 +486,7 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
|
|||
phy->wkupclk = ERR_PTR(-ENODEV);
|
||||
}
|
||||
|
||||
if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie") ||
|
||||
phy->phy_power_syscon) {
|
||||
if (phy->mode != PIPE3_MODE_PCIE || phy->phy_power_syscon) {
|
||||
phy->sys_clk = devm_clk_get(dev, "sysclk");
|
||||
if (IS_ERR(phy->sys_clk)) {
|
||||
dev_err(dev, "unable to get sysclk\n");
|
||||
|
@ -474,7 +494,7 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
|
|||
}
|
||||
}
|
||||
|
||||
if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
|
||||
if (phy->mode == PIPE3_MODE_PCIE) {
|
||||
clk = devm_clk_get(dev, "dpll_ref");
|
||||
if (IS_ERR(clk)) {
|
||||
dev_err(dev, "unable to get dpll ref clk\n");
|
||||
|
@ -546,7 +566,7 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)
|
|||
phy->control_dev = &control_pdev->dev;
|
||||
}
|
||||
|
||||
if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
|
||||
if (phy->mode == PIPE3_MODE_PCIE) {
|
||||
phy->pcs_syscon = syscon_regmap_lookup_by_phandle(node,
|
||||
"syscon-pcs");
|
||||
if (IS_ERR(phy->pcs_syscon)) {
|
||||
|
@ -564,7 +584,7 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)
|
|||
}
|
||||
}
|
||||
|
||||
if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
|
||||
if (phy->mode == PIPE3_MODE_SATA) {
|
||||
phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
|
||||
"syscon-pllreset");
|
||||
if (IS_ERR(phy->dpll_reset_syscon)) {
|
||||
|
@ -589,10 +609,9 @@ static int ti_pipe3_get_tx_rx_base(struct ti_pipe3 *phy)
|
|||
{
|
||||
struct resource *res;
|
||||
struct device *dev = phy->dev;
|
||||
struct device_node *node = dev->of_node;
|
||||
struct platform_device *pdev = to_platform_device(dev);
|
||||
|
||||
if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie"))
|
||||
if (phy->mode != PIPE3_MODE_PCIE)
|
||||
return 0;
|
||||
|
||||
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
|
||||
|
@ -611,24 +630,12 @@ static int ti_pipe3_get_tx_rx_base(struct ti_pipe3 *phy)
|
|||
static int ti_pipe3_get_pll_base(struct ti_pipe3 *phy)
|
||||
{
|
||||
struct resource *res;
|
||||
const struct of_device_id *match;
|
||||
struct device *dev = phy->dev;
|
||||
struct device_node *node = dev->of_node;
|
||||
struct platform_device *pdev = to_platform_device(dev);
|
||||
|
||||
if (of_device_is_compatible(node, "ti,phy-pipe3-pcie"))
|
||||
if (phy->mode == PIPE3_MODE_PCIE)
|
||||
return 0;
|
||||
|
||||
match = of_match_device(ti_pipe3_id_table, dev);
|
||||
if (!match)
|
||||
return -EINVAL;
|
||||
|
||||
phy->dpll_map = (struct pipe3_dpll_map *)match->data;
|
||||
if (!phy->dpll_map) {
|
||||
dev_err(dev, "no DPLL data\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
|
||||
"pll_ctrl");
|
||||
phy->pll_ctrl_base = devm_ioremap_resource(dev, res);
|
||||
|
@ -640,15 +647,28 @@ static int ti_pipe3_probe(struct platform_device *pdev)
|
|||
struct ti_pipe3 *phy;
|
||||
struct phy *generic_phy;
|
||||
struct phy_provider *phy_provider;
|
||||
struct device_node *node = pdev->dev.of_node;
|
||||
struct device *dev = &pdev->dev;
|
||||
int ret;
|
||||
const struct of_device_id *match;
|
||||
struct pipe3_data *data;
|
||||
|
||||
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
|
||||
if (!phy)
|
||||
return -ENOMEM;
|
||||
|
||||
phy->dev = dev;
|
||||
match = of_match_device(ti_pipe3_id_table, dev);
|
||||
if (!match)
|
||||
return -EINVAL;
|
||||
|
||||
data = (struct pipe3_data *)match->data;
|
||||
if (!data) {
|
||||
dev_err(dev, "no driver data\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
phy->dev = dev;
|
||||
phy->mode = data->mode;
|
||||
phy->dpll_map = data->dpll_map;
|
||||
|
||||
ret = ti_pipe3_get_pll_base(phy);
|
||||
if (ret)
|
||||
|
@ -672,7 +692,7 @@ static int ti_pipe3_probe(struct platform_device *pdev)
|
|||
/*
|
||||
* Prevent auto-disable of refclk for SATA PHY due to Errata i783
|
||||
*/
|
||||
if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
|
||||
if (phy->mode == PIPE3_MODE_SATA) {
|
||||
if (!IS_ERR(phy->refclk)) {
|
||||
clk_prepare_enable(phy->refclk);
|
||||
phy->sata_refclk_enabled = true;
|
||||
|
@ -762,18 +782,19 @@ static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy)
|
|||
static const struct of_device_id ti_pipe3_id_table[] = {
|
||||
{
|
||||
.compatible = "ti,phy-usb3",
|
||||
.data = dpll_map_usb,
|
||||
.data = &data_usb,
|
||||
},
|
||||
{
|
||||
.compatible = "ti,omap-usb3",
|
||||
.data = dpll_map_usb,
|
||||
.data = &data_usb,
|
||||
},
|
||||
{
|
||||
.compatible = "ti,phy-pipe3-sata",
|
||||
.data = dpll_map_sata,
|
||||
.data = &data_sata,
|
||||
},
|
||||
{
|
||||
.compatible = "ti,phy-pipe3-pcie",
|
||||
.data = &data_pcie,
|
||||
},
|
||||
{}
|
||||
};
|
||||
|
|
Loading…
Reference in New Issue
Block a user