forked from luck/tmp_suning_uos_patched
hwmon: (nct6775) Integrate new model nct6116
Add support for NCT6116D to nct6775 driver. Signed-off-by: Bjoern Gerhart <gerhart@posteo.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Björn Gerhart
Guenter Roeck
parent
c64fce7f2a
commit
29c7cb485b
|
|
@ -20,6 +20,7 @@
|
|||
*
|
||||
* Chip #vin #fan #pwm #temp chip IDs man ID
|
||||
* nct6106d 9 3 3 6+3 0xc450 0xc1 0x5ca3
|
||||
* nct6116d 9 5 5 3+3 0xd280 0xc1 0x5ca3
|
||||
* nct6775f 9 4 3 6+3 0xb470 0xc1 0x5ca3
|
||||
* nct6776f 9 5 3 6+3 0xc330 0xc1 0x5ca3
|
||||
* nct6779d 15 5 5 2+6 0xc560 0xc1 0x5ca3
|
||||
|
|
@ -58,12 +59,13 @@
|
|||
|
||||
#define USE_ALTERNATE
|
||||
|
||||
enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793,
|
||||
nct6795, nct6796, nct6797, nct6798 };
|
||||
enum kinds { nct6106, nct6116, nct6775, nct6776, nct6779, nct6791, nct6792,
|
||||
nct6793, nct6795, nct6796, nct6797, nct6798 };
|
||||
|
||||
/* used to set data->name = nct6775_device_names[data->sio_kind] */
|
||||
static const char * const nct6775_device_names[] = {
|
||||
"nct6106",
|
||||
"nct6116",
|
||||
"nct6775",
|
||||
"nct6776",
|
||||
"nct6779",
|
||||
|
|
@ -78,6 +80,7 @@ static const char * const nct6775_device_names[] = {
|
|||
|
||||
static const char * const nct6775_sio_names[] __initconst = {
|
||||
"NCT6106D",
|
||||
"NCT6116D",
|
||||
"NCT6775F",
|
||||
"NCT6776D/F",
|
||||
"NCT6779D",
|
||||
|
|
@ -115,6 +118,7 @@ MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
|
|||
#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
|
||||
|
||||
#define SIO_NCT6106_ID 0xc450
|
||||
#define SIO_NCT6116_ID 0xd280
|
||||
#define SIO_NCT6775_ID 0xb470
|
||||
#define SIO_NCT6776_ID 0xc330
|
||||
#define SIO_NCT6779_ID 0xc560
|
||||
|
|
@ -825,10 +829,8 @@ static const u16 NCT6106_FAN_PULSE_SHIFT[] = { 0, 2, 4 };
|
|||
|
||||
static const u8 NCT6106_REG_PWM_MODE[] = { 0xf3, 0xf3, 0xf3 };
|
||||
static const u8 NCT6106_PWM_MODE_MASK[] = { 0x01, 0x02, 0x04 };
|
||||
static const u16 NCT6106_REG_PWM[] = { 0x119, 0x129, 0x139 };
|
||||
static const u16 NCT6106_REG_PWM_READ[] = { 0x4a, 0x4b, 0x4c };
|
||||
static const u16 NCT6106_REG_FAN_MODE[] = { 0x113, 0x123, 0x133 };
|
||||
static const u16 NCT6106_REG_TEMP_SEL[] = { 0x110, 0x120, 0x130 };
|
||||
static const u16 NCT6106_REG_TEMP_SOURCE[] = {
|
||||
0xb0, 0xb1, 0xb2, 0xb3, 0xb4, 0xb5 };
|
||||
|
||||
|
|
@ -896,6 +898,70 @@ static const u16 NCT6106_REG_TEMP_CRIT[32] = {
|
|||
[12] = 0x205,
|
||||
};
|
||||
|
||||
/* NCT6112D/NCT6114D/NCT6116D specific data */
|
||||
|
||||
static const u16 NCT6116_REG_FAN[] = { 0x20, 0x22, 0x24, 0x26, 0x28 };
|
||||
static const u16 NCT6116_REG_FAN_MIN[] = { 0xe0, 0xe2, 0xe4, 0xe6, 0xe8 };
|
||||
static const u16 NCT6116_REG_FAN_PULSES[] = { 0xf6, 0xf6, 0xf6, 0xf6, 0xf5 };
|
||||
static const u16 NCT6116_FAN_PULSE_SHIFT[] = { 0, 2, 4, 6, 6 };
|
||||
|
||||
static const u16 NCT6116_REG_PWM[] = { 0x119, 0x129, 0x139, 0x199, 0x1a9 };
|
||||
static const u16 NCT6116_REG_FAN_MODE[] = { 0x113, 0x123, 0x133, 0x193, 0x1a3 };
|
||||
static const u16 NCT6116_REG_TEMP_SEL[] = { 0x110, 0x120, 0x130, 0x190, 0x1a0 };
|
||||
static const u16 NCT6116_REG_TEMP_SOURCE[] = {
|
||||
0xb0, 0xb1, 0xb2 };
|
||||
|
||||
static const u16 NCT6116_REG_CRITICAL_TEMP[] = {
|
||||
0x11a, 0x12a, 0x13a, 0x19a, 0x1aa };
|
||||
static const u16 NCT6116_REG_CRITICAL_TEMP_TOLERANCE[] = {
|
||||
0x11b, 0x12b, 0x13b, 0x19b, 0x1ab };
|
||||
|
||||
static const u16 NCT6116_REG_CRITICAL_PWM_ENABLE[] = {
|
||||
0x11c, 0x12c, 0x13c, 0x19c, 0x1ac };
|
||||
static const u16 NCT6116_REG_CRITICAL_PWM[] = {
|
||||
0x11d, 0x12d, 0x13d, 0x19d, 0x1ad };
|
||||
|
||||
static const u16 NCT6116_REG_FAN_STEP_UP_TIME[] = {
|
||||
0x114, 0x124, 0x134, 0x194, 0x1a4 };
|
||||
static const u16 NCT6116_REG_FAN_STEP_DOWN_TIME[] = {
|
||||
0x115, 0x125, 0x135, 0x195, 0x1a5 };
|
||||
static const u16 NCT6116_REG_FAN_STOP_OUTPUT[] = {
|
||||
0x116, 0x126, 0x136, 0x196, 0x1a6 };
|
||||
static const u16 NCT6116_REG_FAN_START_OUTPUT[] = {
|
||||
0x117, 0x127, 0x137, 0x197, 0x1a7 };
|
||||
static const u16 NCT6116_REG_FAN_STOP_TIME[] = {
|
||||
0x118, 0x128, 0x138, 0x198, 0x1a8 };
|
||||
static const u16 NCT6116_REG_TOLERANCE_H[] = {
|
||||
0x112, 0x122, 0x132, 0x192, 0x1a2 };
|
||||
|
||||
static const u16 NCT6116_REG_TARGET[] = {
|
||||
0x111, 0x121, 0x131, 0x191, 0x1a1 };
|
||||
|
||||
static const u16 NCT6116_REG_AUTO_TEMP[] = {
|
||||
0x160, 0x170, 0x180, 0x1d0, 0x1e0 };
|
||||
static const u16 NCT6116_REG_AUTO_PWM[] = {
|
||||
0x164, 0x174, 0x184, 0x1d4, 0x1e4 };
|
||||
|
||||
static const s8 NCT6116_ALARM_BITS[] = {
|
||||
0, 1, 2, 3, 4, 5, 7, 8, /* in0.. in7 */
|
||||
9, -1, -1, -1, -1, -1, -1, /* in8..in9 */
|
||||
-1, /* unused */
|
||||
32, 33, 34, 35, 36, /* fan1..fan5 */
|
||||
-1, -1, -1, /* unused */
|
||||
16, 17, 18, -1, -1, -1, /* temp1..temp6 */
|
||||
48, -1 /* intrusion0, intrusion1 */
|
||||
};
|
||||
|
||||
static const s8 NCT6116_BEEP_BITS[] = {
|
||||
0, 1, 2, 3, 4, 5, 7, 8, /* in0.. in7 */
|
||||
9, 10, 11, 12, -1, -1, -1, /* in8..in14 */
|
||||
32, /* global beep enable */
|
||||
24, 25, 26, 27, 28, /* fan1..fan5 */
|
||||
-1, -1, -1, /* unused */
|
||||
16, 17, 18, -1, -1, -1, /* temp1..temp6 */
|
||||
34, -1 /* intrusion0, intrusion1 */
|
||||
};
|
||||
|
||||
static enum pwm_enable reg_to_pwm_enable(int pwm, int mode)
|
||||
{
|
||||
if (mode == 0 && pwm == 255)
|
||||
|
|
@ -1294,6 +1360,11 @@ static bool is_word_sized(struct nct6775_data *data, u16 reg)
|
|||
return reg == 0x20 || reg == 0x22 || reg == 0x24 ||
|
||||
reg == 0xe0 || reg == 0xe2 || reg == 0xe4 ||
|
||||
reg == 0x111 || reg == 0x121 || reg == 0x131;
|
||||
case nct6116:
|
||||
return reg == 0x20 || reg == 0x22 || reg == 0x24 ||
|
||||
reg == 0x26 || reg == 0x28 || reg == 0xe0 || reg == 0xe2 ||
|
||||
reg == 0xe4 || reg == 0xe6 || reg == 0xe8 || reg == 0x111 ||
|
||||
reg == 0x121 || reg == 0x131 || reg == 0x191 || reg == 0x1a1;
|
||||
case nct6775:
|
||||
return (((reg & 0xff00) == 0x100 ||
|
||||
(reg & 0xff00) == 0x200) &&
|
||||
|
|
@ -1673,6 +1744,7 @@ static void nct6775_update_pwm_limits(struct device *dev)
|
|||
data->auto_pwm[i][data->auto_pwm_num] = 0xff;
|
||||
break;
|
||||
case nct6106:
|
||||
case nct6116:
|
||||
case nct6779:
|
||||
case nct6791:
|
||||
case nct6792:
|
||||
|
|
@ -3109,6 +3181,7 @@ store_auto_pwm(struct device *dev, struct device_attribute *attr,
|
|||
case nct6776:
|
||||
break; /* always enabled, nothing to do */
|
||||
case nct6106:
|
||||
case nct6116:
|
||||
case nct6779:
|
||||
case nct6791:
|
||||
case nct6792:
|
||||
|
|
@ -3535,6 +3608,23 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
|
|||
|
||||
fan3pin = !(cr24 & 0x80);
|
||||
pwm3pin = cr24 & 0x08;
|
||||
} else if (data->kind == nct6116) {
|
||||
int cr1a = superio_inb(sioreg, 0x1a);
|
||||
int cr1b = superio_inb(sioreg, 0x1b);
|
||||
int cr24 = superio_inb(sioreg, 0x24);
|
||||
int cr2a = superio_inb(sioreg, 0x2a);
|
||||
int cr2b = superio_inb(sioreg, 0x2b);
|
||||
int cr2f = superio_inb(sioreg, 0x2f);
|
||||
|
||||
fan3pin = !(cr2b & 0x10);
|
||||
fan4pin = (cr2b & 0x80) || // pin 1(2)
|
||||
(!(cr2f & 0x10) && (cr1a & 0x04)); // pin 65(66)
|
||||
fan5pin = (cr2b & 0x80) || // pin 126(127)
|
||||
(!(cr1b & 0x03) && (cr2a & 0x02)); // pin 94(96)
|
||||
|
||||
pwm3pin = fan3pin && (cr24 & 0x08);
|
||||
pwm4pin = fan4pin;
|
||||
pwm5pin = fan5pin;
|
||||
} else {
|
||||
/*
|
||||
* NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D,
|
||||
|
|
@ -3765,7 +3855,7 @@ static int nct6775_probe(struct platform_device *pdev)
|
|||
data->REG_FAN_TIME[1] = NCT6106_REG_FAN_STEP_UP_TIME;
|
||||
data->REG_FAN_TIME[2] = NCT6106_REG_FAN_STEP_DOWN_TIME;
|
||||
data->REG_TOLERANCE_H = NCT6106_REG_TOLERANCE_H;
|
||||
data->REG_PWM[0] = NCT6106_REG_PWM;
|
||||
data->REG_PWM[0] = NCT6116_REG_PWM;
|
||||
data->REG_PWM[1] = NCT6106_REG_FAN_START_OUTPUT;
|
||||
data->REG_PWM[2] = NCT6106_REG_FAN_STOP_OUTPUT;
|
||||
data->REG_PWM[5] = NCT6106_REG_WEIGHT_DUTY_STEP;
|
||||
|
|
@ -3784,7 +3874,7 @@ static int nct6775_probe(struct platform_device *pdev)
|
|||
data->REG_CRITICAL_PWM = NCT6106_REG_CRITICAL_PWM;
|
||||
data->REG_TEMP_OFFSET = NCT6106_REG_TEMP_OFFSET;
|
||||
data->REG_TEMP_SOURCE = NCT6106_REG_TEMP_SOURCE;
|
||||
data->REG_TEMP_SEL = NCT6106_REG_TEMP_SEL;
|
||||
data->REG_TEMP_SEL = NCT6116_REG_TEMP_SEL;
|
||||
data->REG_WEIGHT_TEMP_SEL = NCT6106_REG_WEIGHT_TEMP_SEL;
|
||||
data->REG_WEIGHT_TEMP[0] = NCT6106_REG_WEIGHT_TEMP_STEP;
|
||||
data->REG_WEIGHT_TEMP[1] = NCT6106_REG_WEIGHT_TEMP_STEP_TOL;
|
||||
|
|
@ -3806,6 +3896,79 @@ static int nct6775_probe(struct platform_device *pdev)
|
|||
reg_temp_crit_l = NCT6106_REG_TEMP_CRIT_L;
|
||||
reg_temp_crit_h = NCT6106_REG_TEMP_CRIT_H;
|
||||
|
||||
break;
|
||||
case nct6116:
|
||||
data->in_num = 9;
|
||||
data->pwm_num = 3;
|
||||
data->auto_pwm_num = 4;
|
||||
data->temp_fixed_num = 3;
|
||||
data->num_temp_alarms = 3;
|
||||
data->num_temp_beeps = 3;
|
||||
|
||||
data->fan_from_reg = fan_from_reg13;
|
||||
data->fan_from_reg_min = fan_from_reg13;
|
||||
|
||||
data->temp_label = nct6776_temp_label;
|
||||
data->temp_mask = NCT6776_TEMP_MASK;
|
||||
data->virt_temp_mask = NCT6776_VIRT_TEMP_MASK;
|
||||
|
||||
data->REG_VBAT = NCT6106_REG_VBAT;
|
||||
data->REG_DIODE = NCT6106_REG_DIODE;
|
||||
data->DIODE_MASK = NCT6106_DIODE_MASK;
|
||||
data->REG_VIN = NCT6106_REG_IN;
|
||||
data->REG_IN_MINMAX[0] = NCT6106_REG_IN_MIN;
|
||||
data->REG_IN_MINMAX[1] = NCT6106_REG_IN_MAX;
|
||||
data->REG_TARGET = NCT6116_REG_TARGET;
|
||||
data->REG_FAN = NCT6116_REG_FAN;
|
||||
data->REG_FAN_MODE = NCT6116_REG_FAN_MODE;
|
||||
data->REG_FAN_MIN = NCT6116_REG_FAN_MIN;
|
||||
data->REG_FAN_PULSES = NCT6116_REG_FAN_PULSES;
|
||||
data->FAN_PULSE_SHIFT = NCT6116_FAN_PULSE_SHIFT;
|
||||
data->REG_FAN_TIME[0] = NCT6116_REG_FAN_STOP_TIME;
|
||||
data->REG_FAN_TIME[1] = NCT6116_REG_FAN_STEP_UP_TIME;
|
||||
data->REG_FAN_TIME[2] = NCT6116_REG_FAN_STEP_DOWN_TIME;
|
||||
data->REG_TOLERANCE_H = NCT6116_REG_TOLERANCE_H;
|
||||
data->REG_PWM[0] = NCT6116_REG_PWM;
|
||||
data->REG_PWM[1] = NCT6116_REG_FAN_START_OUTPUT;
|
||||
data->REG_PWM[2] = NCT6116_REG_FAN_STOP_OUTPUT;
|
||||
data->REG_PWM[5] = NCT6106_REG_WEIGHT_DUTY_STEP;
|
||||
data->REG_PWM[6] = NCT6106_REG_WEIGHT_DUTY_BASE;
|
||||
data->REG_PWM_READ = NCT6106_REG_PWM_READ;
|
||||
data->REG_PWM_MODE = NCT6106_REG_PWM_MODE;
|
||||
data->PWM_MODE_MASK = NCT6106_PWM_MODE_MASK;
|
||||
data->REG_AUTO_TEMP = NCT6116_REG_AUTO_TEMP;
|
||||
data->REG_AUTO_PWM = NCT6116_REG_AUTO_PWM;
|
||||
data->REG_CRITICAL_TEMP = NCT6116_REG_CRITICAL_TEMP;
|
||||
data->REG_CRITICAL_TEMP_TOLERANCE
|
||||
= NCT6116_REG_CRITICAL_TEMP_TOLERANCE;
|
||||
data->REG_CRITICAL_PWM_ENABLE = NCT6116_REG_CRITICAL_PWM_ENABLE;
|
||||
data->CRITICAL_PWM_ENABLE_MASK
|
||||
= NCT6106_CRITICAL_PWM_ENABLE_MASK;
|
||||
data->REG_CRITICAL_PWM = NCT6116_REG_CRITICAL_PWM;
|
||||
data->REG_TEMP_OFFSET = NCT6106_REG_TEMP_OFFSET;
|
||||
data->REG_TEMP_SOURCE = NCT6116_REG_TEMP_SOURCE;
|
||||
data->REG_TEMP_SEL = NCT6116_REG_TEMP_SEL;
|
||||
data->REG_WEIGHT_TEMP_SEL = NCT6106_REG_WEIGHT_TEMP_SEL;
|
||||
data->REG_WEIGHT_TEMP[0] = NCT6106_REG_WEIGHT_TEMP_STEP;
|
||||
data->REG_WEIGHT_TEMP[1] = NCT6106_REG_WEIGHT_TEMP_STEP_TOL;
|
||||
data->REG_WEIGHT_TEMP[2] = NCT6106_REG_WEIGHT_TEMP_BASE;
|
||||
data->REG_ALARM = NCT6106_REG_ALARM;
|
||||
data->ALARM_BITS = NCT6116_ALARM_BITS;
|
||||
data->REG_BEEP = NCT6106_REG_BEEP;
|
||||
data->BEEP_BITS = NCT6116_BEEP_BITS;
|
||||
|
||||
reg_temp = NCT6106_REG_TEMP;
|
||||
reg_temp_mon = NCT6106_REG_TEMP_MON;
|
||||
num_reg_temp = ARRAY_SIZE(NCT6106_REG_TEMP);
|
||||
num_reg_temp_mon = ARRAY_SIZE(NCT6106_REG_TEMP_MON);
|
||||
reg_temp_over = NCT6106_REG_TEMP_OVER;
|
||||
reg_temp_hyst = NCT6106_REG_TEMP_HYST;
|
||||
reg_temp_config = NCT6106_REG_TEMP_CONFIG;
|
||||
reg_temp_alternate = NCT6106_REG_TEMP_ALTERNATE;
|
||||
reg_temp_crit = NCT6106_REG_TEMP_CRIT;
|
||||
reg_temp_crit_l = NCT6106_REG_TEMP_CRIT_L;
|
||||
reg_temp_crit_h = NCT6106_REG_TEMP_CRIT_H;
|
||||
|
||||
break;
|
||||
case nct6775:
|
||||
data->in_num = 9;
|
||||
|
|
@ -4352,6 +4515,7 @@ static int nct6775_probe(struct platform_device *pdev)
|
|||
data->have_vid = (cr2a & 0x60) == 0x40;
|
||||
break;
|
||||
case nct6106:
|
||||
case nct6116:
|
||||
case nct6779:
|
||||
case nct6791:
|
||||
case nct6792:
|
||||
|
|
@ -4381,6 +4545,7 @@ static int nct6775_probe(struct platform_device *pdev)
|
|||
NCT6775_REG_CR_FAN_DEBOUNCE);
|
||||
switch (data->kind) {
|
||||
case nct6106:
|
||||
case nct6116:
|
||||
tmp |= 0xe0;
|
||||
break;
|
||||
case nct6775:
|
||||
|
|
@ -4576,6 +4741,9 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
|
|||
case SIO_NCT6106_ID:
|
||||
sio_data->kind = nct6106;
|
||||
break;
|
||||
case SIO_NCT6116_ID:
|
||||
sio_data->kind = nct6116;
|
||||
break;
|
||||
case SIO_NCT6775_ID:
|
||||
sio_data->kind = nct6775;
|
||||
break;
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user