forked from luck/tmp_suning_uos_patched
ASoC: Implement support for CLK_POUT as MCLK on Zylonite
The Zylonite supports switching the MCLK for the WM9713 between the AC97CLK and CLK_POUT outputs of the PXA processor via switch SW15 on the board. This patch adds support for configuring the system to use CLK_POUT. Unfortunately it is not possible to read the state of SW15 from software so this feature is controlled by a module option 'clk_pout' which should be set to a non-zero value to enable the use of CLK_POUT. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
parent
c42f69bb06
commit
2c782f5981
|
@ -14,6 +14,7 @@
|
|||
#include <linux/module.h>
|
||||
#include <linux/moduleparam.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <sound/core.h>
|
||||
#include <sound/pcm.h>
|
||||
|
@ -26,6 +27,17 @@
|
|||
#include "pxa2xx-ac97.h"
|
||||
#include "pxa-ssp.h"
|
||||
|
||||
/*
|
||||
* There is a physical switch SW15 on the board which changes the MCLK
|
||||
* for the WM9713 between the standard AC97 master clock and the
|
||||
* output of the CLK_POUT signal from the PXA.
|
||||
*/
|
||||
static int clk_pout;
|
||||
module_param(clk_pout, int, 0);
|
||||
MODULE_PARM_DESC(clk_pout, "Use CLK_POUT as WM9713 MCLK (SW15 on board).");
|
||||
|
||||
static struct clk *pout;
|
||||
|
||||
static struct snd_soc_card zylonite;
|
||||
|
||||
static const struct snd_soc_dapm_widget zylonite_dapm_widgets[] = {
|
||||
|
@ -61,10 +73,8 @@ static const struct snd_soc_dapm_route audio_map[] = {
|
|||
|
||||
static int zylonite_wm9713_init(struct snd_soc_codec *codec)
|
||||
{
|
||||
/* Currently we only support use of the AC97 clock here. If
|
||||
* CLK_POUT is selected by SW15 then the clock API will need
|
||||
* to be used to request and enable it here.
|
||||
*/
|
||||
if (clk_pout)
|
||||
snd_soc_dai_set_pll(&codec->dai[0], 0, clk_get_rate(pout), 0);
|
||||
|
||||
snd_soc_dapm_new_controls(codec, zylonite_dapm_widgets,
|
||||
ARRAY_SIZE(zylonite_dapm_widgets));
|
||||
|
@ -85,7 +95,6 @@ static int zylonite_voice_hw_params(struct snd_pcm_substream *substream,
|
|||
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
||||
struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
|
||||
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
|
||||
unsigned int pll_out = 0;
|
||||
unsigned int acds = 0;
|
||||
unsigned int wm9713_div = 0;
|
||||
int ret = 0;
|
||||
|
@ -93,16 +102,13 @@ static int zylonite_voice_hw_params(struct snd_pcm_substream *substream,
|
|||
switch (params_rate(params)) {
|
||||
case 8000:
|
||||
wm9713_div = 12;
|
||||
pll_out = 2048000;
|
||||
break;
|
||||
case 16000:
|
||||
wm9713_div = 6;
|
||||
pll_out = 4096000;
|
||||
break;
|
||||
case 48000:
|
||||
default:
|
||||
wm9713_div = 2;
|
||||
pll_out = 12288000;
|
||||
acds = 1;
|
||||
break;
|
||||
}
|
||||
|
@ -123,10 +129,6 @@ static int zylonite_voice_hw_params(struct snd_pcm_substream *substream,
|
|||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = snd_soc_dai_set_pll(cpu_dai, 0, 0, pll_out);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = snd_soc_dai_set_clkdiv(cpu_dai, PXA_SSP_AUDIO_DIV_ACDS, acds);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
@ -135,11 +137,12 @@ static int zylonite_voice_hw_params(struct snd_pcm_substream *substream,
|
|||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* Note that if the PLL is in use the WM9713_PCMCLK_PLL_DIV needs
|
||||
* to be set instead.
|
||||
*/
|
||||
ret = snd_soc_dai_set_clkdiv(codec_dai, WM9713_PCMCLK_DIV,
|
||||
WM9713_PCMDIV(wm9713_div));
|
||||
if (clk_pout)
|
||||
ret = snd_soc_dai_set_clkdiv(codec_dai, WM9713_PCMCLK_PLL_DIV,
|
||||
WM9713_PCMDIV(wm9713_div));
|
||||
else
|
||||
ret = snd_soc_dai_set_clkdiv(codec_dai, WM9713_PCMCLK_DIV,
|
||||
WM9713_PCMDIV(wm9713_div));
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
|
@ -173,8 +176,72 @@ static struct snd_soc_dai_link zylonite_dai[] = {
|
|||
},
|
||||
};
|
||||
|
||||
static int zylonite_probe(struct platform_device *pdev)
|
||||
{
|
||||
int ret;
|
||||
|
||||
if (clk_pout) {
|
||||
pout = clk_get(NULL, "CLK_POUT");
|
||||
if (IS_ERR(pout)) {
|
||||
dev_err(&pdev->dev, "Unable to obtain CLK_POUT: %ld\n",
|
||||
PTR_ERR(pout));
|
||||
return PTR_ERR(pout);
|
||||
}
|
||||
|
||||
ret = clk_enable(pout);
|
||||
if (ret != 0) {
|
||||
dev_err(&pdev->dev, "Unable to enable CLK_POUT: %d\n",
|
||||
ret);
|
||||
clk_put(pout);
|
||||
return ret;
|
||||
}
|
||||
|
||||
dev_dbg(&pdev->dev, "MCLK enabled at %luHz\n",
|
||||
clk_get_rate(pout));
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int zylonite_remove(struct platform_device *pdev)
|
||||
{
|
||||
if (clk_pout) {
|
||||
clk_disable(pout);
|
||||
clk_put(pout);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int zylonite_suspend_post(struct platform_device *pdev,
|
||||
pm_message_t state)
|
||||
{
|
||||
if (clk_pout)
|
||||
clk_disable(pout);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int zylonite_resume_pre(struct platform_device *pdev)
|
||||
{
|
||||
int ret = 0;
|
||||
|
||||
if (clk_pout) {
|
||||
ret = clk_enable(pout);
|
||||
if (ret != 0)
|
||||
dev_err(&pdev->dev, "Unable to enable CLK_POUT: %d\n",
|
||||
ret);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct snd_soc_card zylonite = {
|
||||
.name = "Zylonite",
|
||||
.probe = &zylonite_probe,
|
||||
.remove = &zylonite_remove,
|
||||
.suspend_post = &zylonite_suspend_post,
|
||||
.resume_pre = &zylonite_resume_pre,
|
||||
.platform = &pxa2xx_soc_platform,
|
||||
.dai_link = zylonite_dai,
|
||||
.num_links = ARRAY_SIZE(zylonite_dai),
|
||||
|
|
Loading…
Reference in New Issue
Block a user