net: pcs: Move XPCS into new PCS subdirectory

Create drivers/net/pcs and move the Synopsys DesignWare XPCS into the
new directory. Move the header file into a subdirectory
include/linux/pcs

Start a naming convention of all PCS files use the prefix pcs-, and
rename the XPCS files to fit.

v2:
Add include/linux/pcs

v4:
Fix include path in stmmac.
Remove PCS_DEVICES to avoid new prompts

Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Andrew Lunn 2020-08-27 04:00:28 +02:00 committed by David S. Miller
parent f09665811b
commit 2fa4e4b799
11 changed files with 33 additions and 16 deletions

View File

@ -6513,6 +6513,7 @@ F: Documentation/devicetree/bindings/net/ethernet-phy.yaml
F: Documentation/devicetree/bindings/net/mdio*
F: Documentation/devicetree/bindings/net/qca,ar803x.yaml
F: Documentation/networking/phy.rst
F: drivers/net/pcs/
F: drivers/net/phy/
F: drivers/of/of_mdio.c
F: drivers/of/of_net.c
@ -16730,8 +16731,8 @@ SYNOPSYS DESIGNWARE ETHERNET XPCS DRIVER
M: Jose Abreu <Jose.Abreu@synopsys.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/phy/mdio-xpcs.c
F: include/linux/mdio-xpcs.h
F: drivers/net/pcs/pcs-xpcs.c
F: include/linux/pcs/pcs-xpcs.h
SYNOPSYS DESIGNWARE I2C DRIVER
M: Jarkko Nikula <jarkko.nikula@linux.intel.com>

View File

@ -473,6 +473,8 @@ config NET_SB1000
source "drivers/net/phy/Kconfig"
source "drivers/net/pcs/Kconfig"
source "drivers/net/plip/Kconfig"
source "drivers/net/ppp/Kconfig"

View File

@ -21,6 +21,7 @@ obj-$(CONFIG_MDIO) += mdio.o
obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_NETCONSOLE) += netconsole.o
obj-y += phy/
obj-y += pcs/
obj-$(CONFIG_RIONET) += rionet.o
obj-$(CONFIG_NET_TEAM) += team/
obj-$(CONFIG_TUN) += tun.o

View File

@ -3,7 +3,7 @@ config STMMAC_ETH
tristate "STMicroelectronics Multi-Gigabit Ethernet driver"
depends on HAS_IOMEM && HAS_DMA
select MII
select MDIO_XPCS
select PCS_XPCS
select PAGE_POOL
select PHYLINK
select CRC32

View File

@ -15,7 +15,7 @@
#include <linux/netdevice.h>
#include <linux/stmmac.h>
#include <linux/phy.h>
#include <linux/mdio-xpcs.h>
#include <linux/pcs/pcs-xpcs.h>
#include <linux/module.h>
#if IS_ENABLED(CONFIG_VLAN_8021Q)
#define STMMAC_VLAN_TAG_USED

16
drivers/net/pcs/Kconfig Normal file
View File

@ -0,0 +1,16 @@
# SPDX-License-Identifier: GPL-2.0-only
#
# PCS Layer Configuration
#
menu "PCS device drivers"
config PCS_XPCS
tristate "Synopsys DesignWare XPCS controller"
select MDIO_BUS
depends on MDIO_DEVICE
help
This module provides helper functions for Synopsys DesignWare XPCS
controllers.
endmenu

4
drivers/net/pcs/Makefile Normal file
View File

@ -0,0 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
# Makefile for Linux PCS drivers
obj-$(CONFIG_PCS_XPCS) += pcs-xpcs.o

View File

@ -7,8 +7,8 @@
*/
#include <linux/delay.h>
#include <linux/pcs/pcs-xpcs.h>
#include <linux/mdio.h>
#include <linux/mdio-xpcs.h>
#include <linux/phylink.h>
#include <linux/workqueue.h>

View File

@ -234,12 +234,6 @@ config MDIO_XGENE
This module provides a driver for the MDIO busses found in the
APM X-Gene SoC's.
config MDIO_XPCS
tristate "Synopsys DesignWare XPCS controller"
help
This module provides helper functions for Synopsys DesignWare XPCS
controllers.
endif
endif

View File

@ -47,7 +47,6 @@ obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o
obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o
obj-$(CONFIG_MDIO_XPCS) += mdio-xpcs.o
obj-$(CONFIG_NETWORK_PHY_TIMESTAMPING) += mii_timestamper.o

View File

@ -4,8 +4,8 @@
* Synopsys DesignWare XPCS helpers
*/
#ifndef __LINUX_MDIO_XPCS_H
#define __LINUX_MDIO_XPCS_H
#ifndef __LINUX_PCS_XPCS_H
#define __LINUX_PCS_XPCS_H
#include <linux/phy.h>
#include <linux/phylink.h>
@ -29,7 +29,7 @@ struct mdio_xpcs_ops {
int (*probe)(struct mdio_xpcs_args *xpcs, phy_interface_t interface);
};
#if IS_ENABLED(CONFIG_MDIO_XPCS)
#if IS_ENABLED(CONFIG_PCS_XPCS)
struct mdio_xpcs_ops *mdio_xpcs_get_ops(void);
#else
static inline struct mdio_xpcs_ops *mdio_xpcs_get_ops(void)
@ -38,4 +38,4 @@ static inline struct mdio_xpcs_ops *mdio_xpcs_get_ops(void)
}
#endif
#endif /* __LINUX_MDIO_XPCS_H */
#endif /* __LINUX_PCS_XPCS_H */