forked from luck/tmp_suning_uos_patched
[CPUFREQ] Lots of whitespace & CodingStyle cleanup.
Signed-off-by: Dave Jones <davej@redhat.com>
This commit is contained in:
Dave Jones
parent
8ad5496d23
commit
32ee8c3e47
|
|
@ -96,7 +96,6 @@ config X86_POWERNOW_K8_ACPI
|
|||
|
||||
config X86_GX_SUSPMOD
|
||||
tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
|
||||
depends on PCI
|
||||
help
|
||||
This add the CPUFreq driver for NatSemi Geode processors which
|
||||
support suspend modulation.
|
||||
|
|
|
|||
|
|
@ -39,7 +39,7 @@ static struct pci_dev *nforce2_chipset_dev;
|
|||
static int fid = 0;
|
||||
|
||||
/* min_fsb, max_fsb:
|
||||
* minimum and maximum FSB (= FSB at boot time)
|
||||
* minimum and maximum FSB (= FSB at boot time)
|
||||
*/
|
||||
static int min_fsb = 0;
|
||||
static int max_fsb = 0;
|
||||
|
|
@ -57,10 +57,10 @@ MODULE_PARM_DESC(min_fsb,
|
|||
|
||||
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg)
|
||||
|
||||
/*
|
||||
/**
|
||||
* nforce2_calc_fsb - calculate FSB
|
||||
* @pll: PLL value
|
||||
*
|
||||
*
|
||||
* Calculates FSB from PLL value
|
||||
*/
|
||||
static int nforce2_calc_fsb(int pll)
|
||||
|
|
@ -76,10 +76,10 @@ static int nforce2_calc_fsb(int pll)
|
|||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
/**
|
||||
* nforce2_calc_pll - calculate PLL value
|
||||
* @fsb: FSB
|
||||
*
|
||||
*
|
||||
* Calculate PLL value for given FSB
|
||||
*/
|
||||
static int nforce2_calc_pll(unsigned int fsb)
|
||||
|
|
@ -106,10 +106,10 @@ static int nforce2_calc_pll(unsigned int fsb)
|
|||
return NFORCE2_PLL(mul, div);
|
||||
}
|
||||
|
||||
/*
|
||||
/**
|
||||
* nforce2_write_pll - write PLL value to chipset
|
||||
* @pll: PLL value
|
||||
*
|
||||
*
|
||||
* Writes new FSB PLL value to chipset
|
||||
*/
|
||||
static void nforce2_write_pll(int pll)
|
||||
|
|
@ -121,15 +121,13 @@ static void nforce2_write_pll(int pll)
|
|||
pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLADR, temp);
|
||||
|
||||
/* Now write the value in all 64 registers */
|
||||
for (temp = 0; temp <= 0x3f; temp++) {
|
||||
pci_write_config_dword(nforce2_chipset_dev,
|
||||
NFORCE2_PLLREG, pll);
|
||||
}
|
||||
for (temp = 0; temp <= 0x3f; temp++)
|
||||
pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, pll);
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
/*
|
||||
/**
|
||||
* nforce2_fsb_read - Read FSB
|
||||
*
|
||||
* Read FSB from chipset
|
||||
|
|
@ -140,39 +138,32 @@ static unsigned int nforce2_fsb_read(int bootfsb)
|
|||
struct pci_dev *nforce2_sub5;
|
||||
u32 fsb, temp = 0;
|
||||
|
||||
|
||||
/* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */
|
||||
nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
|
||||
0x01EF,
|
||||
PCI_ANY_ID,
|
||||
PCI_ANY_ID,
|
||||
NULL);
|
||||
|
||||
0x01EF,PCI_ANY_ID,PCI_ANY_ID,NULL);
|
||||
if (!nforce2_sub5)
|
||||
return 0;
|
||||
|
||||
pci_read_config_dword(nforce2_sub5, NFORCE2_BOOTFSB, &fsb);
|
||||
fsb /= 1000000;
|
||||
|
||||
|
||||
/* Check if PLL register is already set */
|
||||
pci_read_config_byte(nforce2_chipset_dev,
|
||||
NFORCE2_PLLENABLE, (u8 *)&temp);
|
||||
|
||||
pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp);
|
||||
|
||||
if(bootfsb || !temp)
|
||||
return fsb;
|
||||
|
||||
/* Use PLL register FSB value */
|
||||
pci_read_config_dword(nforce2_chipset_dev,
|
||||
NFORCE2_PLLREG, &temp);
|
||||
pci_read_config_dword(nforce2_chipset_dev,NFORCE2_PLLREG, &temp);
|
||||
fsb = nforce2_calc_fsb(temp);
|
||||
|
||||
return fsb;
|
||||
}
|
||||
|
||||
/*
|
||||
/**
|
||||
* nforce2_set_fsb - set new FSB
|
||||
* @fsb: New FSB
|
||||
*
|
||||
*
|
||||
* Sets new FSB
|
||||
*/
|
||||
static int nforce2_set_fsb(unsigned int fsb)
|
||||
|
|
@ -186,7 +177,7 @@ static int nforce2_set_fsb(unsigned int fsb)
|
|||
printk(KERN_ERR "cpufreq: FSB %d is out of range!\n", fsb);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
||||
tfsb = nforce2_fsb_read(0);
|
||||
if (!tfsb) {
|
||||
printk(KERN_ERR "cpufreq: Error while reading the FSB\n");
|
||||
|
|
@ -194,8 +185,7 @@ static int nforce2_set_fsb(unsigned int fsb)
|
|||
}
|
||||
|
||||
/* First write? Then set actual value */
|
||||
pci_read_config_byte(nforce2_chipset_dev,
|
||||
NFORCE2_PLLENABLE, (u8 *)&temp);
|
||||
pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp);
|
||||
if (!temp) {
|
||||
pll = nforce2_calc_pll(tfsb);
|
||||
|
||||
|
|
@ -223,7 +213,7 @@ static int nforce2_set_fsb(unsigned int fsb)
|
|||
/* Calculate the PLL reg. value */
|
||||
if ((pll = nforce2_calc_pll(tfsb)) == -1)
|
||||
return -EINVAL;
|
||||
|
||||
|
||||
nforce2_write_pll(pll);
|
||||
#ifdef NFORCE2_DELAY
|
||||
mdelay(NFORCE2_DELAY);
|
||||
|
|
@ -239,7 +229,7 @@ static int nforce2_set_fsb(unsigned int fsb)
|
|||
/**
|
||||
* nforce2_get - get the CPU frequency
|
||||
* @cpu: CPU number
|
||||
*
|
||||
*
|
||||
* Returns the CPU frequency
|
||||
*/
|
||||
static unsigned int nforce2_get(unsigned int cpu)
|
||||
|
|
@ -354,10 +344,10 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy)
|
|||
|
||||
printk(KERN_INFO "cpufreq: FSB currently at %i MHz, FID %d.%d\n", fsb,
|
||||
fid / 10, fid % 10);
|
||||
|
||||
|
||||
/* Set maximum FSB to FSB at boot time */
|
||||
max_fsb = nforce2_fsb_read(1);
|
||||
|
||||
|
||||
if(!max_fsb)
|
||||
return -EIO;
|
||||
|
||||
|
|
@ -398,17 +388,15 @@ static struct cpufreq_driver nforce2_driver = {
|
|||
* nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic
|
||||
*
|
||||
* Detects nForce2 A2 and C1 stepping
|
||||
*
|
||||
*
|
||||
*/
|
||||
static unsigned int nforce2_detect_chipset(void)
|
||||
{
|
||||
u8 revision;
|
||||
|
||||
nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
|
||||
PCI_DEVICE_ID_NVIDIA_NFORCE2,
|
||||
PCI_ANY_ID,
|
||||
PCI_ANY_ID,
|
||||
NULL);
|
||||
PCI_DEVICE_ID_NVIDIA_NFORCE2,
|
||||
PCI_ANY_ID, PCI_ANY_ID, NULL);
|
||||
|
||||
if (nforce2_chipset_dev == NULL)
|
||||
return -ENODEV;
|
||||
|
|
|
|||
|
|
@ -1,16 +1,16 @@
|
|||
/*
|
||||
* elanfreq: cpufreq driver for the AMD ELAN family
|
||||
* elanfreq: cpufreq driver for the AMD ELAN family
|
||||
*
|
||||
* (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
|
||||
*
|
||||
* Parts of this code are (c) Sven Geggus <sven@geggus.net>
|
||||
* Parts of this code are (c) Sven Geggus <sven@geggus.net>
|
||||
*
|
||||
* All Rights Reserved.
|
||||
* All Rights Reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*
|
||||
* 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
|
||||
*
|
||||
|
|
@ -28,7 +28,7 @@
|
|||
#include <asm/timex.h>
|
||||
#include <asm/io.h>
|
||||
|
||||
#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */
|
||||
#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */
|
||||
#define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */
|
||||
|
||||
/* Module parameter */
|
||||
|
|
@ -41,7 +41,7 @@ struct s_elan_multiplier {
|
|||
};
|
||||
|
||||
/*
|
||||
* It is important that the frequencies
|
||||
* It is important that the frequencies
|
||||
* are listed in ascending order here!
|
||||
*/
|
||||
struct s_elan_multiplier elan_multiplier[] = {
|
||||
|
|
@ -72,78 +72,79 @@ static struct cpufreq_frequency_table elanfreq_table[] = {
|
|||
* elanfreq_get_cpu_frequency: determine current cpu speed
|
||||
*
|
||||
* Finds out at which frequency the CPU of the Elan SOC runs
|
||||
* at the moment. Frequencies from 1 to 33 MHz are generated
|
||||
* at the moment. Frequencies from 1 to 33 MHz are generated
|
||||
* the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
|
||||
* and have the rest of the chip running with 33 MHz.
|
||||
* and have the rest of the chip running with 33 MHz.
|
||||
*/
|
||||
|
||||
static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
|
||||
{
|
||||
u8 clockspeed_reg; /* Clock Speed Register */
|
||||
|
||||
u8 clockspeed_reg; /* Clock Speed Register */
|
||||
|
||||
local_irq_disable();
|
||||
outb_p(0x80,REG_CSCIR);
|
||||
clockspeed_reg = inb_p(REG_CSCDR);
|
||||
outb_p(0x80,REG_CSCIR);
|
||||
clockspeed_reg = inb_p(REG_CSCDR);
|
||||
local_irq_enable();
|
||||
|
||||
if ((clockspeed_reg & 0xE0) == 0xE0) { return 0; }
|
||||
if ((clockspeed_reg & 0xE0) == 0xE0)
|
||||
return 0;
|
||||
|
||||
/* Are we in CPU clock multiplied mode (66/99 MHz)? */
|
||||
if ((clockspeed_reg & 0xE0) == 0xC0) {
|
||||
if ((clockspeed_reg & 0x01) == 0) {
|
||||
/* Are we in CPU clock multiplied mode (66/99 MHz)? */
|
||||
if ((clockspeed_reg & 0xE0) == 0xC0) {
|
||||
if ((clockspeed_reg & 0x01) == 0)
|
||||
return 66000;
|
||||
} else {
|
||||
return 99000;
|
||||
}
|
||||
}
|
||||
else
|
||||
return 99000;
|
||||
}
|
||||
|
||||
/* 33 MHz is not 32 MHz... */
|
||||
if ((clockspeed_reg & 0xE0)==0xA0)
|
||||
return 33000;
|
||||
|
||||
return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000);
|
||||
return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* elanfreq_set_cpu_frequency: Change the CPU core frequency
|
||||
* @cpu: cpu number
|
||||
* elanfreq_set_cpu_frequency: Change the CPU core frequency
|
||||
* @cpu: cpu number
|
||||
* @freq: frequency in kHz
|
||||
*
|
||||
* This function takes a frequency value and changes the CPU frequency
|
||||
* This function takes a frequency value and changes the CPU frequency
|
||||
* according to this. Note that the frequency has to be checked by
|
||||
* elanfreq_validatespeed() for correctness!
|
||||
*
|
||||
* There is no return value.
|
||||
*
|
||||
* There is no return value.
|
||||
*/
|
||||
|
||||
static void elanfreq_set_cpu_state (unsigned int state) {
|
||||
|
||||
static void elanfreq_set_cpu_state (unsigned int state)
|
||||
{
|
||||
struct cpufreq_freqs freqs;
|
||||
|
||||
freqs.old = elanfreq_get_cpu_frequency(0);
|
||||
freqs.new = elan_multiplier[state].clock;
|
||||
freqs.cpu = 0; /* elanfreq.c is UP only driver */
|
||||
|
||||
|
||||
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
|
||||
|
||||
printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",elan_multiplier[state].clock);
|
||||
printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",
|
||||
elan_multiplier[state].clock);
|
||||
|
||||
|
||||
/*
|
||||
* Access to the Elan's internal registers is indexed via
|
||||
* 0x22: Chip Setup & Control Register Index Register (CSCI)
|
||||
* 0x23: Chip Setup & Control Register Data Register (CSCD)
|
||||
/*
|
||||
* Access to the Elan's internal registers is indexed via
|
||||
* 0x22: Chip Setup & Control Register Index Register (CSCI)
|
||||
* 0x23: Chip Setup & Control Register Data Register (CSCD)
|
||||
*
|
||||
*/
|
||||
|
||||
/*
|
||||
* 0x40 is the Power Management Unit's Force Mode Register.
|
||||
/*
|
||||
* 0x40 is the Power Management Unit's Force Mode Register.
|
||||
* Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
|
||||
*/
|
||||
|
||||
local_irq_disable();
|
||||
outb_p(0x40,REG_CSCIR); /* Disable hyperspeed mode */
|
||||
outb_p(0x40,REG_CSCIR); /* Disable hyperspeed mode */
|
||||
outb_p(0x00,REG_CSCDR);
|
||||
local_irq_enable(); /* wait till internal pipelines and */
|
||||
udelay(1000); /* buffers have cleaned up */
|
||||
|
|
@ -166,10 +167,10 @@ static void elanfreq_set_cpu_state (unsigned int state) {
|
|||
|
||||
/**
|
||||
* elanfreq_validatespeed: test if frequency range is valid
|
||||
* @policy: the policy to validate
|
||||
* @policy: the policy to validate
|
||||
*
|
||||
* This function checks if a given frequency range in kHz is valid
|
||||
* for the hardware supported by the driver.
|
||||
* This function checks if a given frequency range in kHz is valid
|
||||
* for the hardware supported by the driver.
|
||||
*/
|
||||
|
||||
static int elanfreq_verify (struct cpufreq_policy *policy)
|
||||
|
|
@ -177,11 +178,11 @@ static int elanfreq_verify (struct cpufreq_policy *policy)
|
|||
return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]);
|
||||
}
|
||||
|
||||
static int elanfreq_target (struct cpufreq_policy *policy,
|
||||
unsigned int target_freq,
|
||||
static int elanfreq_target (struct cpufreq_policy *policy,
|
||||
unsigned int target_freq,
|
||||
unsigned int relation)
|
||||
{
|
||||
unsigned int newstate = 0;
|
||||
unsigned int newstate = 0;
|
||||
|
||||
if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate))
|
||||
return -EINVAL;
|
||||
|
|
@ -212,7 +213,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy)
|
|||
max_freq = elanfreq_get_cpu_frequency(0);
|
||||
|
||||
/* table init */
|
||||
for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
|
||||
for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
|
||||
if (elanfreq_table[i].frequency > max_freq)
|
||||
elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
|
||||
}
|
||||
|
|
@ -226,8 +227,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy)
|
|||
if (result)
|
||||
return (result);
|
||||
|
||||
cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu);
|
||||
|
||||
cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
@ -268,9 +268,9 @@ static struct freq_attr* elanfreq_attr[] = {
|
|||
|
||||
|
||||
static struct cpufreq_driver elanfreq_driver = {
|
||||
.get = elanfreq_get_cpu_frequency,
|
||||
.verify = elanfreq_verify,
|
||||
.target = elanfreq_target,
|
||||
.get = elanfreq_get_cpu_frequency,
|
||||
.verify = elanfreq_verify,
|
||||
.target = elanfreq_target,
|
||||
.init = elanfreq_cpu_init,
|
||||
.exit = elanfreq_cpu_exit,
|
||||
.name = "elanfreq",
|
||||
|
|
@ -279,23 +279,21 @@ static struct cpufreq_driver elanfreq_driver = {
|
|||
};
|
||||
|
||||
|
||||
static int __init elanfreq_init(void)
|
||||
{
|
||||
static int __init elanfreq_init(void)
|
||||
{
|
||||
struct cpuinfo_x86 *c = cpu_data;
|
||||
|
||||
/* Test if we have the right hardware */
|
||||
if ((c->x86_vendor != X86_VENDOR_AMD) ||
|
||||
(c->x86 != 4) || (c->x86_model!=10))
|
||||
{
|
||||
(c->x86 != 4) || (c->x86_model!=10)) {
|
||||
printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
return cpufreq_register_driver(&elanfreq_driver);
|
||||
}
|
||||
|
||||
|
||||
static void __exit elanfreq_exit(void)
|
||||
static void __exit elanfreq_exit(void)
|
||||
{
|
||||
cpufreq_unregister_driver(&elanfreq_driver);
|
||||
}
|
||||
|
|
@ -309,4 +307,3 @@ MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
|
|||
|
||||
module_init(elanfreq_init);
|
||||
module_exit(elanfreq_exit);
|
||||
|
||||
|
|
|
|||
|
|
@ -6,12 +6,12 @@
|
|||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* version 2 as published by the Free Software Foundation
|
||||
* version 2 as published by the Free Software Foundation
|
||||
*
|
||||
* The author(s) of this software shall not be held liable for damages
|
||||
* of any nature resulting due to the use of this software. This
|
||||
* software is provided AS-IS with no warranties.
|
||||
*
|
||||
*
|
||||
* Theoritical note:
|
||||
*
|
||||
* (see Geode(tm) CS5530 manual (rev.4.1) page.56)
|
||||
|
|
@ -21,18 +21,18 @@
|
|||
*
|
||||
* Suspend Modulation works by asserting and de-asserting the SUSP# pin
|
||||
* to CPU(GX1/GXLV) for configurable durations. When asserting SUSP#
|
||||
* the CPU enters an idle state. GX1 stops its core clock when SUSP# is
|
||||
* the CPU enters an idle state. GX1 stops its core clock when SUSP# is
|
||||
* asserted then power consumption is reduced.
|
||||
*
|
||||
* Suspend Modulation's OFF/ON duration are configurable
|
||||
* Suspend Modulation's OFF/ON duration are configurable
|
||||
* with 'Suspend Modulation OFF Count Register'
|
||||
* and 'Suspend Modulation ON Count Register'.
|
||||
* These registers are 8bit counters that represent the number of
|
||||
* These registers are 8bit counters that represent the number of
|
||||
* 32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF)
|
||||
* to the processor.
|
||||
*
|
||||
* These counters define a ratio which is the effective frequency
|
||||
* of operation of the system.
|
||||
* These counters define a ratio which is the effective frequency
|
||||
* of operation of the system.
|
||||
*
|
||||
* OFF Count
|
||||
* F_eff = Fgx * ----------------------
|
||||
|
|
@ -40,24 +40,24 @@
|
|||
*
|
||||
* 0 <= On Count, Off Count <= 255
|
||||
*
|
||||
* From these limits, we can get register values
|
||||
* From these limits, we can get register values
|
||||
*
|
||||
* off_duration + on_duration <= MAX_DURATION
|
||||
* on_duration = off_duration * (stock_freq - freq) / freq
|
||||
*
|
||||
* off_duration = (freq * DURATION) / stock_freq
|
||||
* on_duration = DURATION - off_duration
|
||||
* off_duration = (freq * DURATION) / stock_freq
|
||||
* on_duration = DURATION - off_duration
|
||||
*
|
||||
*
|
||||
*---------------------------------------------------------------------------
|
||||
*
|
||||
* ChangeLog:
|
||||
* Dec. 12, 2003 Hiroshi Miura <miura@da-cha.org>
|
||||
* - fix on/off register mistake
|
||||
* - fix cpu_khz calc when it stops cpu modulation.
|
||||
* Dec. 12, 2003 Hiroshi Miura <miura@da-cha.org>
|
||||
* - fix on/off register mistake
|
||||
* - fix cpu_khz calc when it stops cpu modulation.
|
||||
*
|
||||
* Dec. 11, 2002 Hiroshi Miura <miura@da-cha.org>
|
||||
* - rewrite for Cyrix MediaGX Cx5510/5520 and
|
||||
* Dec. 11, 2002 Hiroshi Miura <miura@da-cha.org>
|
||||
* - rewrite for Cyrix MediaGX Cx5510/5520 and
|
||||
* NatSemi Geode Cs5530(A).
|
||||
*
|
||||
* Jul. ??, 2002 Zwane Mwaikambo <zwane@commfireservices.com>
|
||||
|
|
@ -74,40 +74,40 @@
|
|||
************************************************************************/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/smp.h>
|
||||
#include <linux/cpufreq.h>
|
||||
#include <linux/pci.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/errno.h>
|
||||
|
||||
/* PCI config registers, all at F0 */
|
||||
#define PCI_PMER1 0x80 /* power management enable register 1 */
|
||||
#define PCI_PMER2 0x81 /* power management enable register 2 */
|
||||
#define PCI_PMER3 0x82 /* power management enable register 3 */
|
||||
#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */
|
||||
#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */
|
||||
#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */
|
||||
#define PCI_MODON 0x95 /* suspend modulation ON counter register */
|
||||
#define PCI_SUSCFG 0x96 /* suspend configuration register */
|
||||
#define PCI_PMER1 0x80 /* power management enable register 1 */
|
||||
#define PCI_PMER2 0x81 /* power management enable register 2 */
|
||||
#define PCI_PMER3 0x82 /* power management enable register 3 */
|
||||
#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */
|
||||
#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */
|
||||
#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */
|
||||
#define PCI_MODON 0x95 /* suspend modulation ON counter register */
|
||||
#define PCI_SUSCFG 0x96 /* suspend configuration register */
|
||||
|
||||
/* PMER1 bits */
|
||||
#define GPM (1<<0) /* global power management */
|
||||
#define GIT (1<<1) /* globally enable PM device idle timers */
|
||||
#define GTR (1<<2) /* globally enable IO traps */
|
||||
#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */
|
||||
#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */
|
||||
#define GPM (1<<0) /* global power management */
|
||||
#define GIT (1<<1) /* globally enable PM device idle timers */
|
||||
#define GTR (1<<2) /* globally enable IO traps */
|
||||
#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */
|
||||
#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */
|
||||
|
||||
/* SUSCFG bits */
|
||||
#define SUSMOD (1<<0) /* enable/disable suspend modulation */
|
||||
/* the belows support only with cs5530 (after rev.1.2)/cs5530A */
|
||||
#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */
|
||||
/* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */
|
||||
#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */
|
||||
/* the belows support only with cs5530A */
|
||||
#define PWRSVE_ISA (1<<3) /* stop ISA clock */
|
||||
#define PWRSVE (1<<4) /* active idle */
|
||||
#define SUSMOD (1<<0) /* enable/disable suspend modulation */
|
||||
/* the belows support only with cs5530 (after rev.1.2)/cs5530A */
|
||||
#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */
|
||||
/* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */
|
||||
#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */
|
||||
/* the belows support only with cs5530A */
|
||||
#define PWRSVE_ISA (1<<3) /* stop ISA clock */
|
||||
#define PWRSVE (1<<4) /* active idle */
|
||||
|
||||
struct gxfreq_params {
|
||||
u8 on_duration;
|
||||
|
|
@ -128,7 +128,7 @@ module_param (pci_busclk, int, 0444);
|
|||
|
||||
/* maximum duration for which the cpu may be suspended
|
||||
* (32us * MAX_DURATION). If no parameter is given, this defaults
|
||||
* to 255.
|
||||
* to 255.
|
||||
* Note that this leads to a maximum of 8 ms(!) where the CPU clock
|
||||
* is suspended -- processing power is just 0.39% of what it used to be,
|
||||
* though. 781.25 kHz(!) for a 200 MHz processor -- wow. */
|
||||
|
|
@ -144,17 +144,17 @@ module_param (max_duration, int, 0444);
|
|||
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "gx-suspmod", msg)
|
||||
|
||||
/**
|
||||
* we can detect a core multipiler from dir0_lsb
|
||||
* from GX1 datasheet p.56,
|
||||
* MULT[3:0]:
|
||||
* 0000 = SYSCLK multiplied by 4 (test only)
|
||||
* 0001 = SYSCLK multiplied by 10
|
||||
* 0010 = SYSCLK multiplied by 4
|
||||
* 0011 = SYSCLK multiplied by 6
|
||||
* 0100 = SYSCLK multiplied by 9
|
||||
* 0101 = SYSCLK multiplied by 5
|
||||
* 0110 = SYSCLK multiplied by 7
|
||||
* 0111 = SYSCLK multiplied by 8
|
||||
* we can detect a core multipiler from dir0_lsb
|
||||
* from GX1 datasheet p.56,
|
||||
* MULT[3:0]:
|
||||
* 0000 = SYSCLK multiplied by 4 (test only)
|
||||
* 0001 = SYSCLK multiplied by 10
|
||||
* 0010 = SYSCLK multiplied by 4
|
||||
* 0011 = SYSCLK multiplied by 6
|
||||
* 0100 = SYSCLK multiplied by 9
|
||||
* 0101 = SYSCLK multiplied by 5
|
||||
* 0110 = SYSCLK multiplied by 7
|
||||
* 0111 = SYSCLK multiplied by 8
|
||||
* of 33.3MHz
|
||||
**/
|
||||
static int gx_freq_mult[16] = {
|
||||
|
|
@ -164,17 +164,17 @@ static int gx_freq_mult[16] = {
|
|||
|
||||
|
||||
/****************************************************************
|
||||
* Low Level chipset interface *
|
||||
* Low Level chipset interface *
|
||||
****************************************************************/
|
||||
static struct pci_device_id gx_chipset_tbl[] __initdata = {
|
||||
{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID },
|
||||
{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID },
|
||||
{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID },
|
||||
{ 0, },
|
||||
{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID },
|
||||
{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID },
|
||||
{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID },
|
||||
{ 0, },
|
||||
};
|
||||
|
||||
/**
|
||||
* gx_detect_chipset:
|
||||
* gx_detect_chipset:
|
||||
*
|
||||
**/
|
||||
static __init struct pci_dev *gx_detect_chipset(void)
|
||||
|
|
@ -182,17 +182,16 @@ static __init struct pci_dev *gx_detect_chipset(void)
|
|||
struct pci_dev *gx_pci = NULL;
|
||||
|
||||
/* check if CPU is a MediaGX or a Geode. */
|
||||
if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) &&
|
||||
if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) &&
|
||||
(current_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) {
|
||||
dprintk("error: no MediaGX/Geode processor found!\n");
|
||||
return NULL;
|
||||
return NULL;
|
||||
}
|
||||
|
||||
/* detect which companion chip is used */
|
||||
while ((gx_pci = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, gx_pci)) != NULL) {
|
||||
if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL) {
|
||||
if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL)
|
||||
return gx_pci;
|
||||
}
|
||||
}
|
||||
|
||||
dprintk("error: no supported chipset found!\n");
|
||||
|
|
@ -200,24 +199,24 @@ static __init struct pci_dev *gx_detect_chipset(void)
|
|||
}
|
||||
|
||||
/**
|
||||
* gx_get_cpuspeed:
|
||||
* gx_get_cpuspeed:
|
||||
*
|
||||
* Finds out at which efficient frequency the Cyrix MediaGX/NatSemi Geode CPU runs.
|
||||
*/
|
||||
static unsigned int gx_get_cpuspeed(unsigned int cpu)
|
||||
{
|
||||
if ((gx_params->pci_suscfg & SUSMOD) == 0)
|
||||
if ((gx_params->pci_suscfg & SUSMOD) == 0)
|
||||
return stock_freq;
|
||||
|
||||
return (stock_freq * gx_params->off_duration)
|
||||
return (stock_freq * gx_params->off_duration)
|
||||
/ (gx_params->on_duration + gx_params->off_duration);
|
||||
}
|
||||
|
||||
/**
|
||||
* gx_validate_speed:
|
||||
* determine current cpu speed
|
||||
*
|
||||
**/
|
||||
*
|
||||
**/
|
||||
|
||||
static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off_duration)
|
||||
{
|
||||
|
|
@ -230,7 +229,7 @@ static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off
|
|||
*on_duration=0;
|
||||
|
||||
for (i=max_duration; i>0; i--) {
|
||||
tmp_off = ((khz * i) / stock_freq) & 0xff;
|
||||
tmp_off = ((khz * i) / stock_freq) & 0xff;
|
||||
tmp_on = i - tmp_off;
|
||||
tmp_freq = (stock_freq * tmp_off) / i;
|
||||
/* if this relation is closer to khz, use this. If it's equal,
|
||||
|
|
@ -247,18 +246,17 @@ static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off
|
|||
|
||||
|
||||
/**
|
||||
* gx_set_cpuspeed:
|
||||
* set cpu speed in khz.
|
||||
* gx_set_cpuspeed:
|
||||
* set cpu speed in khz.
|
||||
**/
|
||||
|
||||
static void gx_set_cpuspeed(unsigned int khz)
|
||||
{
|
||||
u8 suscfg, pmer1;
|
||||
u8 suscfg, pmer1;
|
||||
unsigned int new_khz;
|
||||
unsigned long flags;
|
||||
struct cpufreq_freqs freqs;
|
||||
|
||||
|
||||
freqs.cpu = 0;
|
||||
freqs.old = gx_get_cpuspeed(0);
|
||||
|
||||
|
|
@ -303,18 +301,18 @@ static void gx_set_cpuspeed(unsigned int khz)
|
|||
pci_write_config_byte(gx_params->cs55x0, PCI_MODOFF, gx_params->off_duration);
|
||||
pci_write_config_byte(gx_params->cs55x0, PCI_MODON, gx_params->on_duration);
|
||||
|
||||
pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg);
|
||||
pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg);
|
||||
pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg);
|
||||
pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg);
|
||||
|
||||
local_irq_restore(flags);
|
||||
local_irq_restore(flags);
|
||||
|
||||
gx_params->pci_suscfg = suscfg;
|
||||
|
||||
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
|
||||
|
||||
dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n",
|
||||
gx_params->on_duration * 32, gx_params->off_duration * 32);
|
||||
dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new);
|
||||
dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n",
|
||||
gx_params->on_duration * 32, gx_params->off_duration * 32);
|
||||
dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new);
|
||||
}
|
||||
|
||||
/****************************************************************
|
||||
|
|
@ -322,10 +320,10 @@ static void gx_set_cpuspeed(unsigned int khz)
|
|||
****************************************************************/
|
||||
|
||||
/*
|
||||
* cpufreq_gx_verify: test if frequency range is valid
|
||||
* cpufreq_gx_verify: test if frequency range is valid
|
||||
*
|
||||
* This function checks if a given frequency range in kHz is valid
|
||||
* for the hardware supported by the driver.
|
||||
* This function checks if a given frequency range in kHz is valid
|
||||
* for the hardware supported by the driver.
|
||||
*/
|
||||
|
||||
static int cpufreq_gx_verify(struct cpufreq_policy *policy)
|
||||
|
|
@ -333,8 +331,8 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy)
|
|||
unsigned int tmp_freq = 0;
|
||||
u8 tmp1, tmp2;
|
||||
|
||||
if (!stock_freq || !policy)
|
||||
return -EINVAL;
|
||||
if (!stock_freq || !policy)
|
||||
return -EINVAL;
|
||||
|
||||
policy->cpu = 0;
|
||||
cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq);
|
||||
|
|
@ -342,14 +340,14 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy)
|
|||
/* it needs to be assured that at least one supported frequency is
|
||||
* within policy->min and policy->max. If it is not, policy->max
|
||||
* needs to be increased until one freuqency is supported.
|
||||
* policy->min may not be decreased, though. This way we guarantee a
|
||||
* policy->min may not be decreased, though. This way we guarantee a
|
||||
* specific processing capacity.
|
||||
*/
|
||||
tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2);
|
||||
if (tmp_freq < policy->min)
|
||||
if (tmp_freq < policy->min)
|
||||
tmp_freq += stock_freq / max_duration;
|
||||
policy->min = tmp_freq;
|
||||
if (policy->min > policy->max)
|
||||
if (policy->min > policy->max)
|
||||
policy->max = tmp_freq;
|
||||
tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2);
|
||||
if (tmp_freq > policy->max)
|
||||
|
|
@ -358,12 +356,12 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy)
|
|||
if (policy->max < policy->min)
|
||||
policy->max = policy->min;
|
||||
cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq);
|
||||
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* cpufreq_gx_target:
|
||||
* cpufreq_gx_target:
|
||||
*
|
||||
*/
|
||||
static int cpufreq_gx_target(struct cpufreq_policy *policy,
|
||||
|
|
@ -373,8 +371,8 @@ static int cpufreq_gx_target(struct cpufreq_policy *policy,
|
|||
u8 tmp1, tmp2;
|
||||
unsigned int tmp_freq;
|
||||
|
||||
if (!stock_freq || !policy)
|
||||
return -EINVAL;
|
||||
if (!stock_freq || !policy)
|
||||
return -EINVAL;
|
||||
|
||||
policy->cpu = 0;
|
||||
|
||||
|
|
@ -431,7 +429,7 @@ static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy)
|
|||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
/*
|
||||
* cpufreq_gx_init:
|
||||
* MediaGX/Geode GX initialize cpufreq driver
|
||||
*/
|
||||
|
|
@ -452,7 +450,7 @@ static int __init cpufreq_gx_init(void)
|
|||
u32 class_rev;
|
||||
|
||||
/* Test if we have the right hardware */
|
||||
if ((gx_pci = gx_detect_chipset()) == NULL)
|
||||
if ((gx_pci = gx_detect_chipset()) == NULL)
|
||||
return -ENODEV;
|
||||
|
||||
/* check whether module parameters are sane */
|
||||
|
|
@ -478,7 +476,7 @@ static int __init cpufreq_gx_init(void)
|
|||
pci_read_config_dword(params->cs55x0, PCI_CLASS_REVISION, &class_rev);
|
||||
params->pci_rev = class_rev && 0xff;
|
||||
|
||||
if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) {
|
||||
if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) {
|
||||
kfree(params);
|
||||
return ret; /* register error! */
|
||||
}
|
||||
|
|
|
|||
|
|
@ -234,7 +234,7 @@ static int __initdata ezrat_eblcr[32] = {
|
|||
|
||||
/*
|
||||
* VIA C3 Nehemiah */
|
||||
|
||||
|
||||
static int __initdata nehemiah_a_clock_ratio[32] = {
|
||||
100, /* 0000 -> 10.0x */
|
||||
160, /* 0001 -> 16.0x */
|
||||
|
|
@ -446,7 +446,7 @@ static int __initdata nehemiah_c_eblcr[32] = {
|
|||
/* end of table */
|
||||
};
|
||||
|
||||
/*
|
||||
/*
|
||||
* Voltage scales. Div/Mod by 1000 to get actual voltage.
|
||||
* Which scale to use depends on the VRM type in use.
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -14,7 +14,7 @@
|
|||
* The author(s) of this software shall not be held liable for damages
|
||||
* of any nature resulting due to the use of this software. This
|
||||
* software is provided AS-IS with no warranties.
|
||||
*
|
||||
*
|
||||
* Date Errata Description
|
||||
* 20020525 N44, O17 12.5% or 25% DC causes lockup
|
||||
*
|
||||
|
|
@ -22,7 +22,7 @@
|
|||
|
||||
#include <linux/config.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/smp.h>
|
||||
#include <linux/cpufreq.h>
|
||||
|
|
@ -30,7 +30,7 @@
|
|||
#include <linux/cpumask.h>
|
||||
#include <linux/sched.h> /* current / set_cpus_allowed() */
|
||||
|
||||
#include <asm/processor.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/msr.h>
|
||||
#include <asm/timex.h>
|
||||
|
||||
|
|
@ -79,7 +79,7 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
|
|||
} else {
|
||||
dprintk("CPU#%d setting duty cycle to %d%%\n",
|
||||
cpu, ((125 * newstate) / 10));
|
||||
/* bits 63 - 5 : reserved
|
||||
/* bits 63 - 5 : reserved
|
||||
* bit 4 : enable/disable
|
||||
* bits 3-1 : duty cycle
|
||||
* bit 0 : reserved
|
||||
|
|
@ -132,7 +132,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
|
|||
}
|
||||
|
||||
/* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software
|
||||
* Developer's Manual, Volume 3
|
||||
* Developer's Manual, Volume 3
|
||||
*/
|
||||
cpus_allowed = current->cpus_allowed;
|
||||
|
||||
|
|
@ -206,7 +206,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
|
|||
return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4D);
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
|
||||
{
|
||||
|
|
@ -234,7 +234,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
|
|||
dprintk("has errata -- disabling frequencies lower than 2ghz\n");
|
||||
break;
|
||||
}
|
||||
|
||||
|
||||
/* get max frequency */
|
||||
stock_freq = cpufreq_p4_get_frequency(c);
|
||||
if (!stock_freq)
|
||||
|
|
@ -250,7 +250,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
|
|||
p4clockmod_table[i].frequency = (stock_freq * i)/8;
|
||||
}
|
||||
cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu);
|
||||
|
||||
|
||||
/* cpuinfo and default policy values */
|
||||
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
|
||||
policy->cpuinfo.transition_latency = 1000000; /* assumed */
|
||||
|
|
@ -262,7 +262,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
|
|||
|
||||
static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy)
|
||||
{
|
||||
cpufreq_frequency_table_put_attr(policy->cpu);
|
||||
cpufreq_frequency_table_put_attr(policy->cpu);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
@ -298,7 +298,7 @@ static struct freq_attr* p4clockmod_attr[] = {
|
|||
};
|
||||
|
||||
static struct cpufreq_driver p4clockmod_driver = {
|
||||
.verify = cpufreq_p4_verify,
|
||||
.verify = cpufreq_p4_verify,
|
||||
.target = cpufreq_p4_target,
|
||||
.init = cpufreq_p4_cpu_init,
|
||||
.exit = cpufreq_p4_cpu_exit,
|
||||
|
|
@ -310,12 +310,12 @@ static struct cpufreq_driver p4clockmod_driver = {
|
|||
|
||||
|
||||
static int __init cpufreq_p4_init(void)
|
||||
{
|
||||
{
|
||||
struct cpuinfo_x86 *c = cpu_data;
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* THERM_CONTROL is architectural for IA32 now, so
|
||||
* THERM_CONTROL is architectural for IA32 now, so
|
||||
* we can rely on the capability checks
|
||||
*/
|
||||
if (c->x86_vendor != X86_VENDOR_INTEL)
|
||||
|
|
|
|||
|
|
@ -8,7 +8,7 @@
|
|||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/cpufreq.h>
|
||||
#include <linux/ioport.h>
|
||||
|
|
@ -50,7 +50,7 @@ static int powernow_k6_get_cpu_multiplier(void)
|
|||
{
|
||||
u64 invalue = 0;
|
||||
u32 msrval;
|
||||
|
||||
|
||||
msrval = POWERNOW_IOPORT + 0x1;
|
||||
wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
|
||||
invalue=inl(POWERNOW_IOPORT + 0x8);
|
||||
|
|
@ -81,7 +81,7 @@ static void powernow_k6_set_state (unsigned int best_i)
|
|||
freqs.old = busfreq * powernow_k6_get_cpu_multiplier();
|
||||
freqs.new = busfreq * clock_ratio[best_i].index;
|
||||
freqs.cpu = 0; /* powernow-k6.c is UP only driver */
|
||||
|
||||
|
||||
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
|
||||
|
||||
/* we now need to transform best_i to the BVC format, see AMD#23446 */
|
||||
|
|
@ -152,7 +152,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
|
|||
busfreq = cpu_khz / max_multiplier;
|
||||
|
||||
/* table init */
|
||||
for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
|
||||
for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
|
||||
if (clock_ratio[i].index > max_multiplier)
|
||||
clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID;
|
||||
else
|
||||
|
|
@ -182,7 +182,7 @@ static int powernow_k6_cpu_exit(struct cpufreq_policy *policy)
|
|||
powernow_k6_set_state(i);
|
||||
}
|
||||
cpufreq_frequency_table_put_attr(policy->cpu);
|
||||
return 0;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static unsigned int powernow_k6_get(unsigned int cpu)
|
||||
|
|
@ -196,8 +196,8 @@ static struct freq_attr* powernow_k6_attr[] = {
|
|||
};
|
||||
|
||||
static struct cpufreq_driver powernow_k6_driver = {
|
||||
.verify = powernow_k6_verify,
|
||||
.target = powernow_k6_target,
|
||||
.verify = powernow_k6_verify,
|
||||
.target = powernow_k6_target,
|
||||
.init = powernow_k6_cpu_init,
|
||||
.exit = powernow_k6_cpu_exit,
|
||||
.get = powernow_k6_get,
|
||||
|
|
@ -215,7 +215,7 @@ static struct cpufreq_driver powernow_k6_driver = {
|
|||
* on success.
|
||||
*/
|
||||
static int __init powernow_k6_init(void)
|
||||
{
|
||||
{
|
||||
struct cpuinfo_x86 *c = cpu_data;
|
||||
|
||||
if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) ||
|
||||
|
|
|
|||
|
|
@ -199,8 +199,8 @@ static int get_ranges (unsigned char *pst)
|
|||
powernow_table[j].index |= (vid << 8); /* upper 8 bits */
|
||||
|
||||
dprintk (" FID: 0x%x (%d.%dx [%dMHz]) "
|
||||
"VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
|
||||
fid_codes[fid] % 10, speed/1000, vid,
|
||||
"VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
|
||||
fid_codes[fid] % 10, speed/1000, vid,
|
||||
mobile_vid_table[vid]/1000,
|
||||
mobile_vid_table[vid]%1000);
|
||||
}
|
||||
|
|
@ -368,8 +368,8 @@ static int powernow_acpi_init(void)
|
|||
}
|
||||
|
||||
dprintk (" FID: 0x%x (%d.%dx [%dMHz]) "
|
||||
"VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
|
||||
fid_codes[fid] % 10, speed/1000, vid,
|
||||
"VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
|
||||
fid_codes[fid] % 10, speed/1000, vid,
|
||||
mobile_vid_table[vid]/1000,
|
||||
mobile_vid_table[vid]%1000);
|
||||
|
||||
|
|
@ -460,7 +460,7 @@ static int powernow_decode_bios (int maxfid, int startvid)
|
|||
(maxfid==pst->maxfid) && (startvid==pst->startvid))
|
||||
{
|
||||
dprintk ("PST:%d (@%p)\n", i, pst);
|
||||
dprintk (" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n",
|
||||
dprintk (" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n",
|
||||
pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);
|
||||
|
||||
ret = get_ranges ((char *) pst + sizeof (struct pst_s));
|
||||
|
|
|
|||
|
|
@ -83,11 +83,10 @@ static u32 find_millivolts_from_vid(struct powernow_k8_data *data, u32 vid)
|
|||
*/
|
||||
static u32 convert_fid_to_vco_fid(u32 fid)
|
||||
{
|
||||
if (fid < HI_FID_TABLE_BOTTOM) {
|
||||
if (fid < HI_FID_TABLE_BOTTOM)
|
||||
return 8 + (2 * fid);
|
||||
} else {
|
||||
else
|
||||
return fid;
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
|
|
@ -177,7 +176,7 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid)
|
|||
if (i++ > 100) {
|
||||
printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
|
||||
return 1;
|
||||
}
|
||||
}
|
||||
} while (query_current_values_with_pending_wait(data));
|
||||
|
||||
count_off_irt(data);
|
||||
|
|
@ -782,9 +781,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
|
|||
/* verify only 1 entry from the lo frequency table */
|
||||
if (fid < HI_FID_TABLE_BOTTOM) {
|
||||
if (cntlofreq) {
|
||||
/* if both entries are the same, ignore this
|
||||
* one...
|
||||
*/
|
||||
/* if both entries are the same, ignore this one ... */
|
||||
if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) ||
|
||||
(powernow_table[i].index != powernow_table[cntlofreq].index)) {
|
||||
printk(KERN_ERR PFX "Too many lo freq table entries\n");
|
||||
|
|
@ -856,7 +853,7 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde
|
|||
dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
|
||||
|
||||
/* fid are the lower 8 bits of the index we stored into
|
||||
* the cpufreq frequency table in find_psb_table, vid are
|
||||
* the cpufreq frequency table in find_psb_table, vid are
|
||||
* the upper 8 bits.
|
||||
*/
|
||||
|
||||
|
|
@ -1050,7 +1047,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
|
|||
pol->governor = CPUFREQ_DEFAULT_GOVERNOR;
|
||||
pol->cpus = cpu_core_map[pol->cpu];
|
||||
|
||||
/* Take a crude guess here.
|
||||
/* Take a crude guess here.
|
||||
* That guess was in microseconds, so multiply with 1000 */
|
||||
pol->cpuinfo.transition_latency = (((data->rvo + 8) * data->vstable * VST_UNITS_20US)
|
||||
+ (3 * (1 << data->irt) * 10)) * 1000;
|
||||
|
|
|
|||
|
|
@ -63,7 +63,7 @@ struct powernow_k8_data {
|
|||
#define MSR_C_LO_VID_SHIFT 8
|
||||
|
||||
/* Field definitions within the FID VID High Control MSR : */
|
||||
#define MSR_C_HI_STP_GNT_TO 0x000fffff
|
||||
#define MSR_C_HI_STP_GNT_TO 0x000fffff
|
||||
|
||||
/* Field definitions within the FID VID Low Status MSR : */
|
||||
#define MSR_S_LO_CHANGE_PENDING 0x80000000 /* cleared when completed */
|
||||
|
|
@ -123,7 +123,7 @@ struct powernow_k8_data {
|
|||
* Most values of interest are enocoded in a single field of the _PSS
|
||||
* entries: the "control" value.
|
||||
*/
|
||||
|
||||
|
||||
#define IRT_SHIFT 30
|
||||
#define RVO_SHIFT 28
|
||||
#define EXT_TYPE_SHIFT 27
|
||||
|
|
@ -185,7 +185,7 @@ static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned
|
|||
#ifndef for_each_cpu_mask
|
||||
#define for_each_cpu_mask(i,mask) for (i=0;i<1;i++)
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[])
|
||||
{
|
||||
|
|
|
|||
|
|
@ -9,7 +9,7 @@
|
|||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/moduleparam.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/cpufreq.h>
|
||||
|
|
@ -36,8 +36,8 @@ static unsigned int pentium3_get_frequency (unsigned int processor)
|
|||
/* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
|
||||
struct {
|
||||
unsigned int ratio; /* Frequency Multiplier (x10) */
|
||||
u8 bitmap; /* power on configuration bits
|
||||
[27, 25:22] (in MSR 0x2a) */
|
||||
u8 bitmap; /* power on configuration bits
|
||||
[27, 25:22] (in MSR 0x2a) */
|
||||
} msr_decode_mult [] = {
|
||||
{ 30, 0x01 },
|
||||
{ 35, 0x05 },
|
||||
|
|
@ -58,9 +58,9 @@ static unsigned int pentium3_get_frequency (unsigned int processor)
|
|||
|
||||
/* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */
|
||||
struct {
|
||||
unsigned int value; /* Front Side Bus speed in MHz */
|
||||
u8 bitmap; /* power on configuration bits [18: 19]
|
||||
(in MSR 0x2a) */
|
||||
unsigned int value; /* Front Side Bus speed in MHz */
|
||||
u8 bitmap; /* power on configuration bits [18: 19]
|
||||
(in MSR 0x2a) */
|
||||
} msr_decode_fsb [] = {
|
||||
{ 66, 0x0 },
|
||||
{ 100, 0x2 },
|
||||
|
|
@ -68,8 +68,8 @@ static unsigned int pentium3_get_frequency (unsigned int processor)
|
|||
{ 0, 0xff}
|
||||
};
|
||||
|
||||
u32 msr_lo, msr_tmp;
|
||||
int i = 0, j = 0;
|
||||
u32 msr_lo, msr_tmp;
|
||||
int i = 0, j = 0;
|
||||
|
||||
/* read MSR 0x2a - we only need the low 32 bits */
|
||||
rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
|
||||
|
|
@ -106,7 +106,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor)
|
|||
|
||||
static unsigned int pentiumM_get_frequency(void)
|
||||
{
|
||||
u32 msr_lo, msr_tmp;
|
||||
u32 msr_lo, msr_tmp;
|
||||
|
||||
rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
|
||||
dprintk("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
|
||||
|
|
@ -134,7 +134,7 @@ static unsigned int pentium4_get_frequency(void)
|
|||
|
||||
dprintk("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi);
|
||||
|
||||
/* decode the FSB: see IA-32 Intel (C) Architecture Software
|
||||
/* decode the FSB: see IA-32 Intel (C) Architecture Software
|
||||
* Developer's Manual, Volume 3: System Prgramming Guide,
|
||||
* revision #12 in Table B-1: MSRs in the Pentium 4 and
|
||||
* Intel Xeon Processors, on page B-4 and B-5.
|
||||
|
|
@ -170,7 +170,7 @@ static unsigned int pentium4_get_frequency(void)
|
|||
return (fsb * mult);
|
||||
}
|
||||
|
||||
|
||||
|
||||
unsigned int speedstep_get_processor_frequency(unsigned int processor)
|
||||
{
|
||||
switch (processor) {
|
||||
|
|
@ -198,11 +198,11 @@ EXPORT_SYMBOL_GPL(speedstep_get_processor_frequency);
|
|||
unsigned int speedstep_detect_processor (void)
|
||||
{
|
||||
struct cpuinfo_x86 *c = cpu_data;
|
||||
u32 ebx, msr_lo, msr_hi;
|
||||
u32 ebx, msr_lo, msr_hi;
|
||||
|
||||
dprintk("x86: %x, model: %x\n", c->x86, c->x86_model);
|
||||
|
||||
if ((c->x86_vendor != X86_VENDOR_INTEL) ||
|
||||
if ((c->x86_vendor != X86_VENDOR_INTEL) ||
|
||||
((c->x86 != 6) && (c->x86 != 0xF)))
|
||||
return 0;
|
||||
|
||||
|
|
@ -218,15 +218,15 @@ unsigned int speedstep_detect_processor (void)
|
|||
dprintk("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask);
|
||||
|
||||
switch (c->x86_mask) {
|
||||
case 4:
|
||||
case 4:
|
||||
/*
|
||||
* B-stepping [M-P4-M]
|
||||
* B-stepping [M-P4-M]
|
||||
* sample has ebx = 0x0f, production has 0x0e.
|
||||
*/
|
||||
if ((ebx == 0x0e) || (ebx == 0x0f))
|
||||
return SPEEDSTEP_PROCESSOR_P4M;
|
||||
break;
|
||||
case 7:
|
||||
case 7:
|
||||
/*
|
||||
* C-stepping [M-P4-M]
|
||||
* needs to have ebx=0x0e, else it's a celeron:
|
||||
|
|
@ -253,7 +253,7 @@ unsigned int speedstep_detect_processor (void)
|
|||
* also, M-P4M HTs have ebx=0x8, too
|
||||
* For now, they are distinguished by the model_id string
|
||||
*/
|
||||
if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL))
|
||||
if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL))
|
||||
return SPEEDSTEP_PROCESSOR_P4M;
|
||||
break;
|
||||
default:
|
||||
|
|
@ -264,8 +264,7 @@ unsigned int speedstep_detect_processor (void)
|
|||
|
||||
switch (c->x86_model) {
|
||||
case 0x0B: /* Intel PIII [Tualatin] */
|
||||
/* cpuid_ebx(1) is 0x04 for desktop PIII,
|
||||
0x06 for mobile PIII-M */
|
||||
/* cpuid_ebx(1) is 0x04 for desktop PIII, 0x06 for mobile PIII-M */
|
||||
ebx = cpuid_ebx(0x00000001);
|
||||
dprintk("ebx is %x\n", ebx);
|
||||
|
||||
|
|
@ -275,9 +274,8 @@ unsigned int speedstep_detect_processor (void)
|
|||
return 0;
|
||||
|
||||
/* So far all PIII-M processors support SpeedStep. See
|
||||
* Intel's 24540640.pdf of June 2003
|
||||
* Intel's 24540640.pdf of June 2003
|
||||
*/
|
||||
|
||||
return SPEEDSTEP_PROCESSOR_PIII_T;
|
||||
|
||||
case 0x08: /* Intel PIII [Coppermine] */
|
||||
|
|
@ -399,7 +397,7 @@ unsigned int speedstep_get_freqs(unsigned int processor,
|
|||
}
|
||||
}
|
||||
|
||||
out:
|
||||
out:
|
||||
local_irq_restore(flags);
|
||||
return (ret);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -14,7 +14,7 @@
|
|||
|
||||
#define SPEEDSTEP_PROCESSOR_PIII_C_EARLY 0x00000001 /* Coppermine core */
|
||||
#define SPEEDSTEP_PROCESSOR_PIII_C 0x00000002 /* Coppermine core */
|
||||
#define SPEEDSTEP_PROCESSOR_PIII_T 0x00000003 /* Tualatin core */
|
||||
#define SPEEDSTEP_PROCESSOR_PIII_T 0x00000003 /* Tualatin core */
|
||||
#define SPEEDSTEP_PROCESSOR_P4M 0x00000004 /* P4-M */
|
||||
|
||||
/* the following processors are not speedstep-capable and are not auto-detected
|
||||
|
|
@ -25,8 +25,8 @@
|
|||
|
||||
/* speedstep states -- only two of them */
|
||||
|
||||
#define SPEEDSTEP_HIGH 0x00000000
|
||||
#define SPEEDSTEP_LOW 0x00000001
|
||||
#define SPEEDSTEP_HIGH 0x00000000
|
||||
#define SPEEDSTEP_LOW 0x00000001
|
||||
|
||||
|
||||
/* detect a speedstep-capable processor */
|
||||
|
|
@ -36,13 +36,13 @@ extern unsigned int speedstep_detect_processor (void);
|
|||
extern unsigned int speedstep_get_processor_frequency(unsigned int processor);
|
||||
|
||||
|
||||
/* detect the low and high speeds of the processor. The callback
|
||||
* set_state"'s first argument is either SPEEDSTEP_HIGH or
|
||||
* SPEEDSTEP_LOW; the second argument is zero so that no
|
||||
/* detect the low and high speeds of the processor. The callback
|
||||
* set_state"'s first argument is either SPEEDSTEP_HIGH or
|
||||
* SPEEDSTEP_LOW; the second argument is zero so that no
|
||||
* cpufreq_notify_transition calls are initiated.
|
||||
*/
|
||||
extern unsigned int speedstep_get_freqs(unsigned int processor,
|
||||
unsigned int *low_speed,
|
||||
unsigned int *high_speed,
|
||||
unsigned int *transition_latency,
|
||||
void (*set_state) (unsigned int state));
|
||||
unsigned int *low_speed,
|
||||
unsigned int *high_speed,
|
||||
unsigned int *transition_latency,
|
||||
void (*set_state) (unsigned int state));
|
||||
|
|
|
|||
|
|
@ -13,8 +13,8 @@
|
|||
*********************************************************************/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/moduleparam.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/moduleparam.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/cpufreq.h>
|
||||
#include <linux/pci.h>
|
||||
|
|
@ -28,21 +28,21 @@
|
|||
*
|
||||
* These parameters are got from IST-SMI BIOS call.
|
||||
* If user gives it, these are used.
|
||||
*
|
||||
*
|
||||
*/
|
||||
static int smi_port = 0;
|
||||
static int smi_cmd = 0;
|
||||
static unsigned int smi_sig = 0;
|
||||
static int smi_port = 0;
|
||||
static int smi_cmd = 0;
|
||||
static unsigned int smi_sig = 0;
|
||||
|
||||
/* info about the processor */
|
||||
static unsigned int speedstep_processor = 0;
|
||||
static unsigned int speedstep_processor = 0;
|
||||
|
||||
/*
|
||||
* There are only two frequency states for each processor. Values
|
||||
/*
|
||||
* There are only two frequency states for each processor. Values
|
||||
* are in kHz for the time being.
|
||||
*/
|
||||
static struct cpufreq_frequency_table speedstep_freqs[] = {
|
||||
{SPEEDSTEP_HIGH, 0},
|
||||
{SPEEDSTEP_HIGH, 0},
|
||||
{SPEEDSTEP_LOW, 0},
|
||||
{0, CPUFREQ_TABLE_END},
|
||||
};
|
||||
|
|
@ -123,7 +123,7 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
|
|||
*low = low_mhz * 1000;
|
||||
|
||||
return result;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* speedstep_get_state - set the SpeedStep state
|
||||
|
|
@ -204,7 +204,7 @@ static void speedstep_set_state (unsigned int state)
|
|||
* speedstep_target - set a new CPUFreq policy
|
||||
* @policy: new policy
|
||||
* @target_freq: new freq
|
||||
* @relation:
|
||||
* @relation:
|
||||
*
|
||||
* Sets a new CPUFreq policy/freq.
|
||||
*/
|
||||
|
|
@ -283,7 +283,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
|
|||
state = speedstep_get_state();
|
||||
speed = speedstep_freqs[state].frequency;
|
||||
|
||||
dprintk("currently at %s speed setting - %i MHz\n",
|
||||
dprintk("currently at %s speed setting - %i MHz\n",
|
||||
(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high",
|
||||
(speed / 1000));
|
||||
|
||||
|
|
@ -296,7 +296,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
|
|||
if (result)
|
||||
return (result);
|
||||
|
||||
cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
|
||||
cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -332,8 +332,8 @@ static struct freq_attr* speedstep_attr[] = {
|
|||
|
||||
static struct cpufreq_driver speedstep_driver = {
|
||||
.name = "speedstep-smi",
|
||||
.verify = speedstep_verify,
|
||||
.target = speedstep_target,
|
||||
.verify = speedstep_verify,
|
||||
.target = speedstep_target,
|
||||
.init = speedstep_cpu_init,
|
||||
.exit = speedstep_cpu_exit,
|
||||
.get = speedstep_get,
|
||||
|
|
@ -370,13 +370,12 @@ static int __init speedstep_init(void)
|
|||
return -ENODEV;
|
||||
}
|
||||
|
||||
dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n",
|
||||
dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n",
|
||||
ist_info.signature, ist_info.command, ist_info.event, ist_info.perf_level);
|
||||
|
||||
|
||||
/* Error if no IST-SMI BIOS or no PARM
|
||||
/* Error if no IST-SMI BIOS or no PARM
|
||||
sig= 'ISGE' aka 'Intel Speedstep Gate E' */
|
||||
if ((ist_info.signature != 0x47534943) && (
|
||||
if ((ist_info.signature != 0x47534943) && (
|
||||
(smi_port == 0) || (smi_cmd == 0)))
|
||||
return -ENODEV;
|
||||
|
||||
|
|
@ -386,17 +385,15 @@ static int __init speedstep_init(void)
|
|||
smi_sig = ist_info.signature;
|
||||
|
||||
/* setup smi_port from MODLULE_PARM or BIOS */
|
||||
if ((smi_port > 0xff) || (smi_port < 0)) {
|
||||
if ((smi_port > 0xff) || (smi_port < 0))
|
||||
return -EINVAL;
|
||||
} else if (smi_port == 0) {
|
||||
else if (smi_port == 0)
|
||||
smi_port = ist_info.command & 0xff;
|
||||
}
|
||||
|
||||
if ((smi_cmd > 0xff) || (smi_cmd < 0)) {
|
||||
if ((smi_cmd > 0xff) || (smi_cmd < 0))
|
||||
return -EINVAL;
|
||||
} else if (smi_cmd == 0) {
|
||||
else if (smi_cmd == 0)
|
||||
smi_cmd = (ist_info.command >> 16) & 0xff;
|
||||
}
|
||||
|
||||
return cpufreq_register_driver(&speedstep_driver);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
* (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
|
||||
*
|
||||
* Oct 2005 - Ashok Raj <ashok.raj@intel.com>
|
||||
* Added handling for CPU hotplug
|
||||
* Added handling for CPU hotplug
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
|
|
@ -44,8 +44,8 @@ static int __cpufreq_governor(struct cpufreq_policy *policy, unsigned int event)
|
|||
static void handle_update(void *data);
|
||||
|
||||
/**
|
||||
* Two notifier lists: the "policy" list is involved in the
|
||||
* validation process for a new CPU frequency policy; the
|
||||
* Two notifier lists: the "policy" list is involved in the
|
||||
* validation process for a new CPU frequency policy; the
|
||||
* "transition" list for kernel code that needs to handle
|
||||
* changes to devices when the CPU clock speed changes.
|
||||
* The mutex locks both lists.
|
||||
|
|
@ -151,7 +151,7 @@ void cpufreq_debug_printk(unsigned int type, const char *prefix, const char *fmt
|
|||
va_list args;
|
||||
unsigned int len;
|
||||
unsigned long flags;
|
||||
|
||||
|
||||
WARN_ON(!prefix);
|
||||
if (type & debug) {
|
||||
spin_lock_irqsave(&disable_ratelimit_lock, flags);
|
||||
|
|
@ -198,7 +198,7 @@ static inline void cpufreq_debug_disable_ratelimit(void) { return; }
|
|||
*
|
||||
* This function alters the system "loops_per_jiffy" for the clock
|
||||
* speed change. Note that loops_per_jiffy cannot be updated on SMP
|
||||
* systems as each CPU might be scaled differently. So, use the arch
|
||||
* systems as each CPU might be scaled differently. So, use the arch
|
||||
* per-CPU loops_per_jiffy value wherever possible.
|
||||
*/
|
||||
#ifndef CONFIG_SMP
|
||||
|
|
@ -233,7 +233,7 @@ static inline void adjust_jiffies(unsigned long val, struct cpufreq_freqs *ci) {
|
|||
*
|
||||
* This function calls the transition notifiers and the "adjust_jiffies"
|
||||
* function. It is called twice on all CPU frequency changes that have
|
||||
* external effects.
|
||||
* external effects.
|
||||
*/
|
||||
void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state)
|
||||
{
|
||||
|
|
@ -251,7 +251,7 @@ void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state)
|
|||
switch (state) {
|
||||
|
||||
case CPUFREQ_PRECHANGE:
|
||||
/* detect if the driver reported a value as "old frequency"
|
||||
/* detect if the driver reported a value as "old frequency"
|
||||
* which is not equal to what the cpufreq core thinks is
|
||||
* "old frequency".
|
||||
*/
|
||||
|
|
@ -335,11 +335,11 @@ extern struct sysdev_class cpu_sysdev_class;
|
|||
* "unsigned int".
|
||||
*/
|
||||
|
||||
#define show_one(file_name, object) \
|
||||
static ssize_t show_##file_name \
|
||||
(struct cpufreq_policy * policy, char *buf) \
|
||||
{ \
|
||||
return sprintf (buf, "%u\n", policy->object); \
|
||||
#define show_one(file_name, object) \
|
||||
static ssize_t show_##file_name \
|
||||
(struct cpufreq_policy * policy, char *buf) \
|
||||
{ \
|
||||
return sprintf (buf, "%u\n", policy->object); \
|
||||
}
|
||||
|
||||
show_one(cpuinfo_min_freq, cpuinfo.min_freq);
|
||||
|
|
@ -404,8 +404,8 @@ static ssize_t show_scaling_governor (struct cpufreq_policy * policy, char *buf)
|
|||
/**
|
||||
* store_scaling_governor - store policy for the specified CPU
|
||||
*/
|
||||
static ssize_t store_scaling_governor (struct cpufreq_policy * policy,
|
||||
const char *buf, size_t count)
|
||||
static ssize_t store_scaling_governor (struct cpufreq_policy * policy,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
unsigned int ret = -EINVAL;
|
||||
char str_governor[16];
|
||||
|
|
@ -528,7 +528,7 @@ static ssize_t show(struct kobject * kobj, struct attribute * attr ,char * buf)
|
|||
return ret;
|
||||
}
|
||||
|
||||
static ssize_t store(struct kobject * kobj, struct attribute * attr,
|
||||
static ssize_t store(struct kobject * kobj, struct attribute * attr,
|
||||
const char * buf, size_t count)
|
||||
{
|
||||
struct cpufreq_policy * policy = to_policy(kobj);
|
||||
|
|
@ -564,7 +564,7 @@ static struct kobj_type ktype_cpufreq = {
|
|||
/**
|
||||
* cpufreq_add_dev - add a CPU device
|
||||
*
|
||||
* Adds the cpufreq interface for a CPU device.
|
||||
* Adds the cpufreq interface for a CPU device.
|
||||
*/
|
||||
static int cpufreq_add_dev (struct sys_device * sys_dev)
|
||||
{
|
||||
|
|
@ -724,7 +724,7 @@ static int cpufreq_remove_dev (struct sys_device * sys_dev)
|
|||
|
||||
#ifdef CONFIG_SMP
|
||||
/* if this isn't the CPU which is the parent of the kobj, we
|
||||
* only need to unlink, put and exit
|
||||
* only need to unlink, put and exit
|
||||
*/
|
||||
if (unlikely(cpu != data->cpu)) {
|
||||
dprintk("removing link\n");
|
||||
|
|
@ -740,7 +740,7 @@ static int cpufreq_remove_dev (struct sys_device * sys_dev)
|
|||
if (!kobject_get(&data->kobj)) {
|
||||
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
|
||||
cpufreq_debug_enable_ratelimit();
|
||||
return -EFAULT;
|
||||
return -EFAULT;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
|
|
@ -783,7 +783,7 @@ static int cpufreq_remove_dev (struct sys_device * sys_dev)
|
|||
kobject_put(&data->kobj);
|
||||
|
||||
/* we need to make sure that the underlying kobj is actually
|
||||
* not referenced anymore by anybody before we proceed with
|
||||
* not referenced anymore by anybody before we proceed with
|
||||
* unloading.
|
||||
*/
|
||||
dprintk("waiting for dropping of refcount\n");
|
||||
|
|
@ -831,7 +831,7 @@ static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq, unsigne
|
|||
}
|
||||
|
||||
|
||||
/**
|
||||
/**
|
||||
* cpufreq_quick_get - get the CPU frequency (in kHz) frpm policy->cur
|
||||
* @cpu: CPU number
|
||||
*
|
||||
|
|
@ -855,7 +855,7 @@ unsigned int cpufreq_quick_get(unsigned int cpu)
|
|||
EXPORT_SYMBOL(cpufreq_quick_get);
|
||||
|
||||
|
||||
/**
|
||||
/**
|
||||
* cpufreq_get - get the current CPU frequency (in kHz)
|
||||
* @cpu: CPU number
|
||||
*
|
||||
|
|
@ -1072,7 +1072,7 @@ static struct sysdev_driver cpufreq_sysdev_driver = {
|
|||
* @nb: notifier function to register
|
||||
* @list: CPUFREQ_TRANSITION_NOTIFIER or CPUFREQ_POLICY_NOTIFIER
|
||||
*
|
||||
* Add a driver to one of two lists: either a list of drivers that
|
||||
* Add a driver to one of two lists: either a list of drivers that
|
||||
* are notified about clock rate changes (once before and once after
|
||||
* the transition), or a list of drivers that are notified about
|
||||
* changes in cpufreq policy.
|
||||
|
|
@ -1225,7 +1225,7 @@ int cpufreq_register_governor(struct cpufreq_governor *governor)
|
|||
return -EINVAL;
|
||||
|
||||
mutex_lock(&cpufreq_governor_mutex);
|
||||
|
||||
|
||||
list_for_each_entry(t, &cpufreq_governor_list, governor_list) {
|
||||
if (!strnicmp(governor->name,t->name,CPUFREQ_NAME_LEN)) {
|
||||
mutex_unlock(&cpufreq_governor_mutex);
|
||||
|
|
@ -1234,7 +1234,7 @@ int cpufreq_register_governor(struct cpufreq_governor *governor)
|
|||
}
|
||||
list_add(&governor->governor_list, &cpufreq_governor_list);
|
||||
|
||||
mutex_unlock(&cpufreq_governor_mutex);
|
||||
mutex_unlock(&cpufreq_governor_mutex);
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(cpufreq_register_governor);
|
||||
|
|
@ -1497,9 +1497,9 @@ static struct notifier_block cpufreq_cpu_notifier =
|
|||
* @driver_data: A struct cpufreq_driver containing the values#
|
||||
* submitted by the CPU Frequency driver.
|
||||
*
|
||||
* Registers a CPU Frequency driver to this core code. This code
|
||||
* Registers a CPU Frequency driver to this core code. This code
|
||||
* returns zero on success, -EBUSY when another driver got here first
|
||||
* (and isn't unregistered in the meantime).
|
||||
* (and isn't unregistered in the meantime).
|
||||
*
|
||||
*/
|
||||
int cpufreq_register_driver(struct cpufreq_driver *driver_data)
|
||||
|
|
@ -1560,7 +1560,7 @@ EXPORT_SYMBOL_GPL(cpufreq_register_driver);
|
|||
/**
|
||||
* cpufreq_unregister_driver - unregister the current CPUFreq driver
|
||||
*
|
||||
* Unregister the current CPUFreq driver. Only call this if you have
|
||||
* Unregister the current CPUFreq driver. Only call this if you have
|
||||
* the right to do so, i.e. if you have succeeded in initialising before!
|
||||
* Returns zero if successful, and -EINVAL if the cpufreq_driver is
|
||||
* currently not initialised.
|
||||
|
|
|
|||
|
|
@ -38,17 +38,17 @@
|
|||
#define MIN_FREQUENCY_UP_THRESHOLD (11)
|
||||
#define MAX_FREQUENCY_UP_THRESHOLD (100)
|
||||
|
||||
/*
|
||||
* The polling frequency of this governor depends on the capability of
|
||||
/*
|
||||
* The polling frequency of this governor depends on the capability of
|
||||
* the processor. Default polling frequency is 1000 times the transition
|
||||
* latency of the processor. The governor will work on any processor with
|
||||
* transition latency <= 10mS, using appropriate sampling
|
||||
* latency of the processor. The governor will work on any processor with
|
||||
* transition latency <= 10mS, using appropriate sampling
|
||||
* rate.
|
||||
* For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL)
|
||||
* this governor will not work.
|
||||
* All times here are in uS.
|
||||
*/
|
||||
static unsigned int def_sampling_rate;
|
||||
static unsigned int def_sampling_rate;
|
||||
#define MIN_SAMPLING_RATE_RATIO (2)
|
||||
/* for correct statistics, we need at least 10 ticks between each measure */
|
||||
#define MIN_STAT_SAMPLING_RATE (MIN_SAMPLING_RATE_RATIO * jiffies_to_usecs(10))
|
||||
|
|
@ -62,28 +62,28 @@ static unsigned int def_sampling_rate;
|
|||
static void do_dbs_timer(void *data);
|
||||
|
||||
struct cpu_dbs_info_s {
|
||||
struct cpufreq_policy *cur_policy;
|
||||
unsigned int prev_cpu_idle_up;
|
||||
unsigned int prev_cpu_idle_down;
|
||||
unsigned int enable;
|
||||
struct cpufreq_policy *cur_policy;
|
||||
unsigned int prev_cpu_idle_up;
|
||||
unsigned int prev_cpu_idle_down;
|
||||
unsigned int enable;
|
||||
};
|
||||
static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info);
|
||||
|
||||
static unsigned int dbs_enable; /* number of CPUs using this policy */
|
||||
|
||||
static DEFINE_MUTEX (dbs_mutex);
|
||||
static DEFINE_MUTEX (dbs_mutex);
|
||||
static DECLARE_WORK (dbs_work, do_dbs_timer, NULL);
|
||||
|
||||
struct dbs_tuners {
|
||||
unsigned int sampling_rate;
|
||||
unsigned int sampling_down_factor;
|
||||
unsigned int up_threshold;
|
||||
unsigned int ignore_nice;
|
||||
unsigned int sampling_rate;
|
||||
unsigned int sampling_down_factor;
|
||||
unsigned int up_threshold;
|
||||
unsigned int ignore_nice;
|
||||
};
|
||||
|
||||
static struct dbs_tuners dbs_tuners_ins = {
|
||||
.up_threshold = DEF_FREQUENCY_UP_THRESHOLD,
|
||||
.sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR,
|
||||
.up_threshold = DEF_FREQUENCY_UP_THRESHOLD,
|
||||
.sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR,
|
||||
};
|
||||
|
||||
static inline unsigned int get_cpu_idle_time(unsigned int cpu)
|
||||
|
|
@ -106,8 +106,8 @@ static ssize_t show_sampling_rate_min(struct cpufreq_policy *policy, char *buf)
|
|||
return sprintf (buf, "%u\n", MIN_SAMPLING_RATE);
|
||||
}
|
||||
|
||||
#define define_one_ro(_name) \
|
||||
static struct freq_attr _name = \
|
||||
#define define_one_ro(_name) \
|
||||
static struct freq_attr _name = \
|
||||
__ATTR(_name, 0444, show_##_name, NULL)
|
||||
|
||||
define_one_ro(sampling_rate_max);
|
||||
|
|
@ -125,7 +125,7 @@ show_one(sampling_down_factor, sampling_down_factor);
|
|||
show_one(up_threshold, up_threshold);
|
||||
show_one(ignore_nice_load, ignore_nice);
|
||||
|
||||
static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused,
|
||||
static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
unsigned int input;
|
||||
|
|
@ -144,7 +144,7 @@ static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused,
|
|||
return count;
|
||||
}
|
||||
|
||||
static ssize_t store_sampling_rate(struct cpufreq_policy *unused,
|
||||
static ssize_t store_sampling_rate(struct cpufreq_policy *unused,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
unsigned int input;
|
||||
|
|
@ -163,7 +163,7 @@ static ssize_t store_sampling_rate(struct cpufreq_policy *unused,
|
|||
return count;
|
||||
}
|
||||
|
||||
static ssize_t store_up_threshold(struct cpufreq_policy *unused,
|
||||
static ssize_t store_up_threshold(struct cpufreq_policy *unused,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
unsigned int input;
|
||||
|
|
@ -171,7 +171,7 @@ static ssize_t store_up_threshold(struct cpufreq_policy *unused,
|
|||
ret = sscanf (buf, "%u", &input);
|
||||
|
||||
mutex_lock(&dbs_mutex);
|
||||
if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD ||
|
||||
if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD ||
|
||||
input < MIN_FREQUENCY_UP_THRESHOLD) {
|
||||
mutex_unlock(&dbs_mutex);
|
||||
return -EINVAL;
|
||||
|
|
@ -190,14 +190,14 @@ static ssize_t store_ignore_nice_load(struct cpufreq_policy *policy,
|
|||
int ret;
|
||||
|
||||
unsigned int j;
|
||||
|
||||
|
||||
ret = sscanf (buf, "%u", &input);
|
||||
if ( ret != 1 )
|
||||
return -EINVAL;
|
||||
|
||||
if ( input > 1 )
|
||||
input = 1;
|
||||
|
||||
|
||||
mutex_lock(&dbs_mutex);
|
||||
if ( input == dbs_tuners_ins.ignore_nice ) { /* nothing to do */
|
||||
mutex_unlock(&dbs_mutex);
|
||||
|
|
@ -259,16 +259,16 @@ static void dbs_check_cpu(int cpu)
|
|||
return;
|
||||
|
||||
policy = this_dbs_info->cur_policy;
|
||||
/*
|
||||
/*
|
||||
* Every sampling_rate, we check, if current idle time is less
|
||||
* than 20% (default), then we try to increase frequency
|
||||
* Every sampling_rate*sampling_down_factor, we look for a the lowest
|
||||
* frequency which can sustain the load while keeping idle time over
|
||||
* 30%. If such a frequency exist, we try to decrease to this frequency.
|
||||
*
|
||||
* Any frequency increase takes it to the maximum frequency.
|
||||
* Frequency reduction happens at minimum steps of
|
||||
* 5% (default) of current frequency
|
||||
* Any frequency increase takes it to the maximum frequency.
|
||||
* Frequency reduction happens at minimum steps of
|
||||
* 5% (default) of current frequency
|
||||
*/
|
||||
|
||||
/* Check for frequency increase */
|
||||
|
|
@ -298,14 +298,14 @@ static void dbs_check_cpu(int cpu)
|
|||
struct cpu_dbs_info_s *j_dbs_info;
|
||||
|
||||
j_dbs_info = &per_cpu(cpu_dbs_info, j);
|
||||
j_dbs_info->prev_cpu_idle_down =
|
||||
j_dbs_info->prev_cpu_idle_down =
|
||||
j_dbs_info->prev_cpu_idle_up;
|
||||
}
|
||||
/* if we are already at full speed then break out early */
|
||||
if (policy->cur == policy->max)
|
||||
return;
|
||||
|
||||
__cpufreq_driver_target(policy, policy->max,
|
||||
|
||||
__cpufreq_driver_target(policy, policy->max,
|
||||
CPUFREQ_RELATION_H);
|
||||
return;
|
||||
}
|
||||
|
|
@ -347,7 +347,7 @@ static void dbs_check_cpu(int cpu)
|
|||
* policy. To be safe, we focus 10 points under the threshold.
|
||||
*/
|
||||
freq_next = ((total_ticks - idle_ticks) * 100) / total_ticks;
|
||||
freq_next = (freq_next * policy->cur) /
|
||||
freq_next = (freq_next * policy->cur) /
|
||||
(dbs_tuners_ins.up_threshold - 10);
|
||||
|
||||
if (freq_next <= ((policy->cur * 95) / 100))
|
||||
|
|
@ -355,15 +355,15 @@ static void dbs_check_cpu(int cpu)
|
|||
}
|
||||
|
||||
static void do_dbs_timer(void *data)
|
||||
{
|
||||
{
|
||||
int i;
|
||||
mutex_lock(&dbs_mutex);
|
||||
for_each_online_cpu(i)
|
||||
dbs_check_cpu(i);
|
||||
schedule_delayed_work(&dbs_work,
|
||||
schedule_delayed_work(&dbs_work,
|
||||
usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
|
||||
mutex_unlock(&dbs_mutex);
|
||||
}
|
||||
}
|
||||
|
||||
static inline void dbs_timer_init(void)
|
||||
{
|
||||
|
|
@ -390,7 +390,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
|
|||
|
||||
switch (event) {
|
||||
case CPUFREQ_GOV_START:
|
||||
if ((!cpu_online(cpu)) ||
|
||||
if ((!cpu_online(cpu)) ||
|
||||
(!policy->cur))
|
||||
return -EINVAL;
|
||||
|
||||
|
|
@ -399,13 +399,13 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
|
|||
return -EINVAL;
|
||||
if (this_dbs_info->enable) /* Already enabled */
|
||||
break;
|
||||
|
||||
|
||||
mutex_lock(&dbs_mutex);
|
||||
for_each_cpu_mask(j, policy->cpus) {
|
||||
struct cpu_dbs_info_s *j_dbs_info;
|
||||
j_dbs_info = &per_cpu(cpu_dbs_info, j);
|
||||
j_dbs_info->cur_policy = policy;
|
||||
|
||||
|
||||
j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j);
|
||||
j_dbs_info->prev_cpu_idle_down
|
||||
= j_dbs_info->prev_cpu_idle_up;
|
||||
|
|
@ -435,7 +435,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
|
|||
|
||||
dbs_timer_init();
|
||||
}
|
||||
|
||||
|
||||
mutex_unlock(&dbs_mutex);
|
||||
break;
|
||||
|
||||
|
|
@ -448,9 +448,9 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
|
|||
* Stop the timerschedule work, when this governor
|
||||
* is used for first time
|
||||
*/
|
||||
if (dbs_enable == 0)
|
||||
if (dbs_enable == 0)
|
||||
dbs_timer_exit();
|
||||
|
||||
|
||||
mutex_unlock(&dbs_mutex);
|
||||
|
||||
break;
|
||||
|
|
@ -460,11 +460,11 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
|
|||
if (policy->max < this_dbs_info->cur_policy->cur)
|
||||
__cpufreq_driver_target(
|
||||
this_dbs_info->cur_policy,
|
||||
policy->max, CPUFREQ_RELATION_H);
|
||||
policy->max, CPUFREQ_RELATION_H);
|
||||
else if (policy->min > this_dbs_info->cur_policy->cur)
|
||||
__cpufreq_driver_target(
|
||||
this_dbs_info->cur_policy,
|
||||
policy->min, CPUFREQ_RELATION_L);
|
||||
policy->min, CPUFREQ_RELATION_L);
|
||||
mutex_unlock(&dbs_mutex);
|
||||
break;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -32,7 +32,7 @@ static int cpufreq_governor_performance(struct cpufreq_policy *policy,
|
|||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
struct cpufreq_governor cpufreq_gov_performance = {
|
||||
.name = "performance",
|
||||
.governor = cpufreq_governor_performance,
|
||||
|
|
|
|||
|
|
@ -31,7 +31,7 @@ static int cpufreq_governor_powersave(struct cpufreq_policy *policy,
|
|||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static struct cpufreq_governor cpufreq_gov_powersave = {
|
||||
.name = "powersave",
|
||||
.governor = cpufreq_governor_powersave,
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@
|
|||
* drivers/cpufreq/cpufreq_stats.c
|
||||
*
|
||||
* Copyright (C) 2003-2004 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>.
|
||||
* (C) 2004 Zou Nan hai <nanhai.zou@intel.com>.
|
||||
* (C) 2004 Zou Nan hai <nanhai.zou@intel.com>.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
|
|
@ -90,7 +90,7 @@ show_time_in_state(struct cpufreq_policy *policy, char *buf)
|
|||
return 0;
|
||||
cpufreq_stats_update(stat->cpu);
|
||||
for (i = 0; i < stat->state_num; i++) {
|
||||
len += sprintf(buf + len, "%u %llu\n", stat->freq_table[i],
|
||||
len += sprintf(buf + len, "%u %llu\n", stat->freq_table[i],
|
||||
(unsigned long long)cputime64_to_clock_t(stat->time_in_state[i]));
|
||||
}
|
||||
return len;
|
||||
|
|
@ -171,7 +171,7 @@ cpufreq_stats_free_table (unsigned int cpu)
|
|||
{
|
||||
struct cpufreq_stats *stat = cpufreq_stats_table[cpu];
|
||||
struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
|
||||
if (policy && policy->cpu == cpu)
|
||||
if (policy && policy->cpu == cpu)
|
||||
sysfs_remove_group(&policy->kobj, &stats_attr_group);
|
||||
if (stat) {
|
||||
kfree(stat->time_in_state);
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@ static DEFINE_MUTEX (userspace_mutex);
|
|||
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "userspace", msg)
|
||||
|
||||
/* keep track of frequency transitions */
|
||||
static int
|
||||
static int
|
||||
userspace_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
|
||||
void *data)
|
||||
{
|
||||
|
|
@ -58,7 +58,7 @@ static struct notifier_block userspace_cpufreq_notifier_block = {
|
|||
};
|
||||
|
||||
|
||||
/**
|
||||
/**
|
||||
* cpufreq_set - set the CPU frequency
|
||||
* @freq: target frequency in kHz
|
||||
* @cpu: CPU for which the frequency is to be set
|
||||
|
|
@ -103,8 +103,8 @@ static ssize_t show_speed (struct cpufreq_policy *policy, char *buf)
|
|||
return sprintf (buf, "%u\n", cpu_cur_freq[policy->cpu]);
|
||||
}
|
||||
|
||||
static ssize_t
|
||||
store_speed (struct cpufreq_policy *policy, const char *buf, size_t count)
|
||||
static ssize_t
|
||||
store_speed (struct cpufreq_policy *policy, const char *buf, size_t count)
|
||||
{
|
||||
unsigned int freq = 0;
|
||||
unsigned int ret;
|
||||
|
|
@ -118,7 +118,7 @@ store_speed (struct cpufreq_policy *policy, const char *buf, size_t count)
|
|||
return count;
|
||||
}
|
||||
|
||||
static struct freq_attr freq_attr_scaling_setspeed =
|
||||
static struct freq_attr freq_attr_scaling_setspeed =
|
||||
{
|
||||
.attr = { .name = "scaling_setspeed", .mode = 0644, .owner = THIS_MODULE },
|
||||
.show = show_speed,
|
||||
|
|
@ -135,7 +135,7 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy,
|
|||
return -EINVAL;
|
||||
BUG_ON(!policy->cur);
|
||||
mutex_lock(&userspace_mutex);
|
||||
cpu_is_managed[cpu] = 1;
|
||||
cpu_is_managed[cpu] = 1;
|
||||
cpu_min_freq[cpu] = policy->min;
|
||||
cpu_max_freq[cpu] = policy->max;
|
||||
cpu_cur_freq[cpu] = policy->cur;
|
||||
|
|
|
|||
|
|
@ -59,9 +59,8 @@ int cpufreq_frequency_table_verify(struct cpufreq_policy *policy,
|
|||
if (!cpu_online(policy->cpu))
|
||||
return -EINVAL;
|
||||
|
||||
cpufreq_verify_within_limits(policy,
|
||||
policy->cpuinfo.min_freq,
|
||||
policy->cpuinfo.max_freq);
|
||||
cpufreq_verify_within_limits(policy,
|
||||
policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
|
||||
|
||||
for (i=0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
|
||||
unsigned int freq = table[i].frequency;
|
||||
|
|
@ -76,9 +75,8 @@ int cpufreq_frequency_table_verify(struct cpufreq_policy *policy,
|
|||
if (!count)
|
||||
policy->max = next_larger;
|
||||
|
||||
cpufreq_verify_within_limits(policy,
|
||||
policy->cpuinfo.min_freq,
|
||||
policy->cpuinfo.max_freq);
|
||||
cpufreq_verify_within_limits(policy,
|
||||
policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
|
||||
|
||||
dprintk("verification lead to (%u - %u kHz) for cpu %u\n", policy->min, policy->max, policy->cpu);
|
||||
|
||||
|
|
@ -199,7 +197,7 @@ EXPORT_SYMBOL_GPL(cpufreq_freq_attr_scaling_available_freqs);
|
|||
* if you use these, you must assure that the frequency table is valid
|
||||
* all the time between get_attr and put_attr!
|
||||
*/
|
||||
void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table,
|
||||
void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table,
|
||||
unsigned int cpu)
|
||||
{
|
||||
dprintk("setting show_table for cpu %u to %p\n", cpu, table);
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user