AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

pinctrl/lantiq: pinconf uses port instead of pin

Browse Source 
The XWAY pinctrl driver invalidly uses the port and not the pin
number to work out the registers and bits to be set for the
opendrain and pullup/down resistors.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
John Crispin 2013-02-01 13:04:55 +01:00 committed by Linus Walleij
parent d41e35c364
commit 362ba3cfb4
1 changed files with 14 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
drivers/pinctrl/pinctrl-xway.c
View File

@ -441,17 +441,17 @@ static int xway_pinconf_get(struct pinctrl_dev *pctldev,
if (port == PORT3)
reg = GPIO3_OD;
else
reg = GPIO_OD(port);
reg = GPIO_OD(pin);
*config = LTQ_PINCONF_PACK(param,
!!gpio_getbit(info->membase[0], reg, PORT_PIN(port)));
!!gpio_getbit(info->membase[0], reg, PORT_PIN(pin)));
break;
case LTQ_PINCONF_PARAM_PULL:
if (port == PORT3)
reg = GPIO3_PUDEN;
else
reg = GPIO_PUDEN(port);
if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port))) {
reg = GPIO_PUDEN(pin);
if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin))) {
*config = LTQ_PINCONF_PACK(param, 0);
break;
}
@ -459,8 +459,8 @@ static int xway_pinconf_get(struct pinctrl_dev *pctldev,
if (port == PORT3)
reg = GPIO3_PUDSEL;
else
reg = GPIO_PUDSEL(port);
if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port)))
reg = GPIO_PUDSEL(pin);
if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin)))
*config = LTQ_PINCONF_PACK(param, 2);
else
*config = LTQ_PINCONF_PACK(param, 1);
@ -488,29 +488,29 @@ static int xway_pinconf_set(struct pinctrl_dev *pctldev,
if (port == PORT3)
reg = GPIO3_OD;
else
reg = GPIO_OD(port);
gpio_setbit(info->membase[0], reg, PORT_PIN(port));
reg = GPIO_OD(pin);
gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
break;
case LTQ_PINCONF_PARAM_PULL:
if (port == PORT3)
reg = GPIO3_PUDEN;
else
reg = GPIO_PUDEN(port);
reg = GPIO_PUDEN(pin);
if (arg == 0) {
gpio_clearbit(info->membase[0], reg, PORT_PIN(port));
gpio_clearbit(info->membase[0], reg, PORT_PIN(pin));
break;
}
gpio_setbit(info->membase[0], reg, PORT_PIN(port));
gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
if (port == PORT3)
reg = GPIO3_PUDSEL;
else
reg = GPIO_PUDSEL(port);
reg = GPIO_PUDSEL(pin);
if (arg == 1)
gpio_clearbit(info->membase[0], reg, PORT_PIN(port));
gpio_clearbit(info->membase[0], reg, PORT_PIN(pin));
else if (arg == 2)
gpio_setbit(info->membase[0], reg, PORT_PIN(port));
gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
else
dev_err(pctldev->dev, "Invalid pull value %d\n", arg);
break;