forked from luck/tmp_suning_uos_patched
Move Sibyte Kconfig stuff into it's own Kconfig.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Ralf Baechle
parent
db89a48c1f
commit
38b18f7258
|
|
@ -749,222 +749,6 @@ config MIPS_MTX1
|
|||
|
||||
endchoice
|
||||
|
||||
config SIBYTE_SB1xxx_SOC
|
||||
bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)"
|
||||
depends on EXPERIMENTAL
|
||||
select BOOT_ELF32
|
||||
select DMA_COHERENT
|
||||
select SWAP_IO_SPACE
|
||||
select SYS_SUPPORTS_32BIT_KERNEL
|
||||
select SYS_SUPPORTS_64BIT_KERNEL
|
||||
|
||||
choice
|
||||
prompt "BCM1xxx SOC-based board"
|
||||
depends on SIBYTE_SB1xxx_SOC
|
||||
default SIBYTE_SWARM
|
||||
help
|
||||
Enable support for boards based on the SiByte line of SOCs
|
||||
from Broadcom. There are configurations for the known
|
||||
evaluation boards, or you can choose "Other" and add your
|
||||
own board support code.
|
||||
|
||||
config SIBYTE_SWARM
|
||||
bool "BCM91250A-SWARM"
|
||||
select SIBYTE_SB1250
|
||||
|
||||
config SIBYTE_SENTOSA
|
||||
bool "BCM91250E-Sentosa"
|
||||
select SIBYTE_SB1250
|
||||
|
||||
config SIBYTE_RHONE
|
||||
bool "BCM91125E-Rhone"
|
||||
select SIBYTE_BCM1125H
|
||||
|
||||
config SIBYTE_CARMEL
|
||||
bool "BCM91120x-Carmel"
|
||||
select SIBYTE_BCM1120
|
||||
|
||||
config SIBYTE_PTSWARM
|
||||
bool "BCM91250PT-PTSWARM"
|
||||
select SIBYTE_SB1250
|
||||
|
||||
config SIBYTE_LITTLESUR
|
||||
bool "BCM91250C2-LittleSur"
|
||||
select SIBYTE_SB1250
|
||||
|
||||
config SIBYTE_CRHINE
|
||||
bool "BCM91120C-CRhine"
|
||||
select SIBYTE_BCM1120
|
||||
|
||||
config SIBYTE_CRHONE
|
||||
bool "BCM91125C-CRhone"
|
||||
select SIBYTE_BCM1125
|
||||
|
||||
config SIBYTE_UNKNOWN
|
||||
bool "Other"
|
||||
|
||||
endchoice
|
||||
|
||||
config SIBYTE_BOARD
|
||||
bool
|
||||
depends on SIBYTE_SB1xxx_SOC && !SIBYTE_UNKNOWN
|
||||
default y
|
||||
|
||||
choice
|
||||
prompt "BCM1xxx SOC Type"
|
||||
depends on SIBYTE_UNKNOWN
|
||||
default SIBYTE_UNK_BCM1250
|
||||
help
|
||||
Since you haven't chosen a known evaluation board from
|
||||
Broadcom, you must explicitly pick the SOC this kernel is
|
||||
targetted for.
|
||||
|
||||
config SIBYTE_UNK_BCM1250
|
||||
bool "BCM1250"
|
||||
select SIBYTE_SB1250
|
||||
|
||||
config SIBYTE_UNK_BCM1120
|
||||
bool "BCM1120"
|
||||
select SIBYTE_BCM1120
|
||||
|
||||
config SIBYTE_UNK_BCM1125
|
||||
bool "BCM1125"
|
||||
select SIBYTE_BCM1125
|
||||
|
||||
config SIBYTE_UNK_BCM1125H
|
||||
bool "BCM1125H"
|
||||
select SIBYTE_BCM1125H
|
||||
|
||||
endchoice
|
||||
|
||||
config SIBYTE_SB1250
|
||||
bool
|
||||
select HW_HAS_PCI
|
||||
|
||||
config SIBYTE_BCM1120
|
||||
bool
|
||||
select SIBYTE_BCM112X
|
||||
|
||||
config SIBYTE_BCM1125
|
||||
bool
|
||||
select HW_HAS_PCI
|
||||
select SIBYTE_BCM112X
|
||||
|
||||
config SIBYTE_BCM1125H
|
||||
bool
|
||||
select HW_HAS_PCI
|
||||
select SIBYTE_BCM112X
|
||||
|
||||
config SIBYTE_BCM112X
|
||||
bool
|
||||
|
||||
choice
|
||||
prompt "SiByte SOC Stepping"
|
||||
depends on SIBYTE_SB1xxx_SOC
|
||||
|
||||
config CPU_SB1_PASS_1
|
||||
bool "1250 Pass1"
|
||||
depends on SIBYTE_SB1250
|
||||
select CPU_HAS_PREFETCH
|
||||
|
||||
config CPU_SB1_PASS_2_1250
|
||||
bool "1250 An"
|
||||
depends on SIBYTE_SB1250
|
||||
select CPU_SB1_PASS_2
|
||||
help
|
||||
Also called BCM1250 Pass 2
|
||||
|
||||
config CPU_SB1_PASS_2_2
|
||||
bool "1250 Bn"
|
||||
depends on SIBYTE_SB1250
|
||||
select CPU_HAS_PREFETCH
|
||||
help
|
||||
Also called BCM1250 Pass 2.2
|
||||
|
||||
config CPU_SB1_PASS_4
|
||||
bool "1250 Cn"
|
||||
depends on SIBYTE_SB1250
|
||||
select CPU_HAS_PREFETCH
|
||||
help
|
||||
Also called BCM1250 Pass 3
|
||||
|
||||
config CPU_SB1_PASS_2_112x
|
||||
bool "112x Hybrid"
|
||||
depends on SIBYTE_BCM112X
|
||||
select CPU_SB1_PASS_2
|
||||
|
||||
config CPU_SB1_PASS_3
|
||||
bool "112x An"
|
||||
depends on SIBYTE_BCM112X
|
||||
select CPU_HAS_PREFETCH
|
||||
|
||||
endchoice
|
||||
|
||||
config CPU_SB1_PASS_2
|
||||
bool
|
||||
|
||||
config SIBYTE_HAS_LDT
|
||||
bool
|
||||
depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
|
||||
default y
|
||||
|
||||
config SIMULATION
|
||||
bool "Running under simulation"
|
||||
depends on SIBYTE_SB1xxx_SOC
|
||||
help
|
||||
Build a kernel suitable for running under the GDB simulator.
|
||||
Primarily adjusts the kernel's notion of time.
|
||||
|
||||
config SIBYTE_CFE
|
||||
bool "Booting from CFE"
|
||||
depends on SIBYTE_SB1xxx_SOC
|
||||
help
|
||||
Make use of the CFE API for enumerating available memory,
|
||||
controlling secondary CPUs, and possibly console output.
|
||||
|
||||
config SIBYTE_CFE_CONSOLE
|
||||
bool "Use firmware console"
|
||||
depends on SIBYTE_CFE
|
||||
help
|
||||
Use the CFE API's console write routines during boot. Other console
|
||||
options (VT console, sb1250 duart console, etc.) should not be
|
||||
configured.
|
||||
|
||||
config SIBYTE_STANDALONE
|
||||
bool
|
||||
depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
|
||||
default y
|
||||
|
||||
config SIBYTE_STANDALONE_RAM_SIZE
|
||||
int "Memory size (in megabytes)"
|
||||
depends on SIBYTE_STANDALONE
|
||||
default "32"
|
||||
|
||||
config SIBYTE_BUS_WATCHER
|
||||
bool "Support for Bus Watcher statistics"
|
||||
depends on SIBYTE_SB1xxx_SOC
|
||||
help
|
||||
Handle and keep statistics on the bus error interrupts (COR_ECC,
|
||||
BAD_ECC, IO_BUS).
|
||||
|
||||
config SIBYTE_BW_TRACE
|
||||
bool "Capture bus trace before bus error"
|
||||
depends on SIBYTE_BUS_WATCHER
|
||||
help
|
||||
Run a continuous bus trace, dumping the raw data as soon as
|
||||
a ZBbus error is detected. Cannot work if ZBbus profiling
|
||||
is turned on, and also will interfere with JTAG-based trace
|
||||
buffer activity. Raw buffer data is dumped to console, and
|
||||
must be processed off-line.
|
||||
|
||||
config SIBYTE_SB1250_PROF
|
||||
bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
|
||||
depends on SIBYTE_SB1xxx_SOC
|
||||
|
||||
config SIBYTE_TBPROF
|
||||
bool "Support for ZBbus profiling"
|
||||
depends on SIBYTE_SB1xxx_SOC
|
||||
|
||||
config SNI_RM200_PCI
|
||||
bool "Support for SNI RM200 PCI"
|
||||
select ARC
|
||||
|
|
@ -1002,6 +786,8 @@ config TOSHIBA_FPCIB0
|
|||
bool "FPCIB0 Backplane Support"
|
||||
depends on TOSHIBA_RBTX4927
|
||||
|
||||
source "arch/mips/sibyte/Kconfig"
|
||||
|
||||
config RWSEM_GENERIC_SPINLOCK
|
||||
bool
|
||||
default y
|
||||
|
|
|
|||
143
arch/mips/sibyte/Kconfig
Normal file
143
arch/mips/sibyte/Kconfig
Normal file
|
|
@ -0,0 +1,143 @@
|
|||
config SIBYTE_SB1250
|
||||
bool
|
||||
select HW_HAS_PCI
|
||||
select SIBYTE_HAS_LDT
|
||||
select SIBYTE_SB1xxx_SOC
|
||||
|
||||
config SIBYTE_BCM1120
|
||||
bool
|
||||
select SIBYTE_BCM112X
|
||||
select SIBYTE_SB1xxx_SOC
|
||||
|
||||
config SIBYTE_BCM1125
|
||||
bool
|
||||
select HW_HAS_PCI
|
||||
select SIBYTE_BCM112X
|
||||
select SIBYTE_SB1xxx_SOC
|
||||
|
||||
config SIBYTE_BCM1125H
|
||||
bool
|
||||
select HW_HAS_PCI
|
||||
select SIBYTE_BCM112X
|
||||
select SIBYTE_HAS_LDT
|
||||
select SIBYTE_SB1xxx_SOC
|
||||
|
||||
config SIBYTE_BCM112X
|
||||
bool
|
||||
select SIBYTE_SB1xxx_SOC
|
||||
|
||||
config SIBYTE_SB1xxx_SOC
|
||||
bool
|
||||
depends on EXPERIMENTAL
|
||||
select DMA_COHERENT
|
||||
select SIBYTE_CFE
|
||||
select SWAP_IO_SPACE
|
||||
select SYS_SUPPORTS_32BIT_KERNEL
|
||||
select SYS_SUPPORTS_64BIT_KERNEL
|
||||
|
||||
choice
|
||||
prompt "SiByte SOC Stepping"
|
||||
depends on SIBYTE_SB1xxx_SOC
|
||||
|
||||
config CPU_SB1_PASS_1
|
||||
bool "1250 Pass1"
|
||||
depends on SIBYTE_SB1250
|
||||
select CPU_HAS_PREFETCH
|
||||
|
||||
config CPU_SB1_PASS_2_1250
|
||||
bool "1250 An"
|
||||
depends on SIBYTE_SB1250
|
||||
select CPU_SB1_PASS_2
|
||||
help
|
||||
Also called BCM1250 Pass 2
|
||||
|
||||
config CPU_SB1_PASS_2_2
|
||||
bool "1250 Bn"
|
||||
depends on SIBYTE_SB1250
|
||||
select CPU_HAS_PREFETCH
|
||||
help
|
||||
Also called BCM1250 Pass 2.2
|
||||
|
||||
config CPU_SB1_PASS_4
|
||||
bool "1250 Cn"
|
||||
depends on SIBYTE_SB1250
|
||||
select CPU_HAS_PREFETCH
|
||||
help
|
||||
Also called BCM1250 Pass 3
|
||||
|
||||
config CPU_SB1_PASS_2_112x
|
||||
bool "112x Hybrid"
|
||||
depends on SIBYTE_BCM112X
|
||||
select CPU_SB1_PASS_2
|
||||
|
||||
config CPU_SB1_PASS_3
|
||||
bool "112x An"
|
||||
depends on SIBYTE_BCM112X
|
||||
select CPU_HAS_PREFETCH
|
||||
|
||||
endchoice
|
||||
|
||||
config CPU_SB1_PASS_2
|
||||
bool
|
||||
|
||||
config SIBYTE_HAS_LDT
|
||||
bool
|
||||
depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
|
||||
default y
|
||||
|
||||
config SIMULATION
|
||||
bool "Running under simulation"
|
||||
depends on SIBYTE_SB1xxx_SOC
|
||||
help
|
||||
Build a kernel suitable for running under the GDB simulator.
|
||||
Primarily adjusts the kernel's notion of time.
|
||||
|
||||
config SIBYTE_CFE
|
||||
bool "Booting from CFE"
|
||||
depends on SIBYTE_SB1xxx_SOC
|
||||
help
|
||||
Make use of the CFE API for enumerating available memory,
|
||||
controlling secondary CPUs, and possibly console output.
|
||||
|
||||
config SIBYTE_CFE_CONSOLE
|
||||
bool "Use firmware console"
|
||||
depends on SIBYTE_CFE
|
||||
help
|
||||
Use the CFE API's console write routines during boot. Other console
|
||||
options (VT console, sb1250 duart console, etc.) should not be
|
||||
configured.
|
||||
|
||||
config SIBYTE_STANDALONE
|
||||
bool
|
||||
depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
|
||||
default y
|
||||
|
||||
config SIBYTE_STANDALONE_RAM_SIZE
|
||||
int "Memory size (in megabytes)"
|
||||
depends on SIBYTE_STANDALONE
|
||||
default "32"
|
||||
|
||||
config SIBYTE_BUS_WATCHER
|
||||
bool "Support for Bus Watcher statistics"
|
||||
depends on SIBYTE_SB1xxx_SOC
|
||||
help
|
||||
Handle and keep statistics on the bus error interrupts (COR_ECC,
|
||||
BAD_ECC, IO_BUS).
|
||||
|
||||
config SIBYTE_BW_TRACE
|
||||
bool "Capture bus trace before bus error"
|
||||
depends on SIBYTE_BUS_WATCHER
|
||||
help
|
||||
Run a continuous bus trace, dumping the raw data as soon as
|
||||
a ZBbus error is detected. Cannot work if ZBbus profiling
|
||||
is turned on, and also will interfere with JTAG-based trace
|
||||
buffer activity. Raw buffer data is dumped to console, and
|
||||
must be processed off-line.
|
||||
|
||||
config SIBYTE_SB1250_PROF
|
||||
bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
|
||||
depends on SIBYTE_SB1xxx_SOC
|
||||
|
||||
config SIBYTE_TBPROF
|
||||
bool "Support for ZBbus profiling"
|
||||
depends on SIBYTE_SB1xxx_SOC
|
||||
Loading…
Reference in New Issue
Block a user