AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

nfc: pn532: Add uart phy docs and rename it

Browse Source 
This adds documentation about the uart phy to the pn532 binding doc. As
the filename "pn533-i2c.txt" is not appropriate any more, rename it to
the more general "pn532.txt".
This also documents the deprecation of the compatible strings ending
with "...-i2c".

Cc: Johan Hovold <johan@kernel.org>
Cc: Simon Horman <horms@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Lars Poeschel 2019-10-29 15:45:58 +01:00 committed by David S. Miller
parent 3d5f3a67e4
commit 3c57b39547
2 changed files with 46 additions and 29 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

46
Documentation/devicetree/bindings/net/nfc/pn532.txt Normal file
View File

@ -0,0 +1,46 @@
* NXP Semiconductors PN532 NFC Controller
Required properties:
- compatible: Should be
- "nxp,pn532" Place a node with this inside the devicetree node of the bus
where the NFC chip is connected to.
Currently the kernel has phy bindings for uart and i2c.
- "nxp,pn532-i2c" (DEPRECATED) only works for the i2c binding.
- "nxp,pn533-i2c" (DEPRECATED) only works for the i2c binding.
Required properties if connected on i2c:
- clock-frequency: I²C work frequency.
- reg: for the I²C bus address. This is fixed at 0x24 for the PN532.
- interrupts: GPIO interrupt to which the chip is connected
Optional SoC Specific Properties:
- pinctrl-names: Contains only one value - "default".
- pintctrl-0: Specifies the pin control groups used for this controller.
Example (for ARM-based BeagleBone with PN532 on I2C2):
&i2c2 {
pn532: nfc@24 {
compatible = "nxp,pn532";
reg = <0x24>;
clock-frequency = <400000>;
interrupt-parent = <&gpio1>;
interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
};
};
Example (for PN532 connected via uart):
uart4: serial@49042000 {
compatible = "ti,omap3-uart";
pn532: nfc {
compatible = "nxp,pn532";
};
};

29
Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt
View File

@ -1,29 +0,0 @@
* NXP Semiconductors PN532 NFC Controller
Required properties:
- compatible: Should be "nxp,pn532-i2c" or "nxp,pn533-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
- interrupts: GPIO interrupt to which the chip is connected
Optional SoC Specific Properties:
- pinctrl-names: Contains only one value - "default".
- pintctrl-0: Specifies the pin control groups used for this controller.
Example (for ARM-based BeagleBone with PN532 on I2C2):
&i2c2 {
pn532: pn532@24 {
compatible = "nxp,pn532-i2c";
reg = <0x24>;
clock-frequency = <400000>;
interrupt-parent = <&gpio1>;
interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
};
};