forked from luck/tmp_suning_uos_patched
[PATCH] CRIS update: configuration and build
Changes to configuration and build system. * Added v32 sub architecture. * Use generic hard IRQ. * Added SMP options. * Added options to OOPS at NMI and reboot at OOM. * Made it possible to set objtree. * Added option to select Kernel GDB serial port. * Corrected Kconfig usage. * Added system profiler. Signed-off-by: Mikael Starvik <starvik@axis.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Mikael Starvik
Linus Torvalds
parent
cb09f540a1
commit
3e41d6522a
|
|
@ -38,4 +38,9 @@ config FRAME_POINTER
|
|||
If you don't debug the kernel, you can say N, but we may not be able
|
||||
to solve problems without frame pointers.
|
||||
|
||||
config DEBUG_NMI_OOPS
|
||||
bool "NMI causes oops printout"
|
||||
help
|
||||
If the system locks up without any debug information you can say Y
|
||||
here to make it possible to dump an OOPS with an external NMI.
|
||||
endmenu
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
# $Id: Makefile,v 1.23 2004/10/19 13:07:34 starvik Exp $
|
||||
# $Id: Makefile,v 1.28 2005/03/17 10:44:37 larsv Exp $
|
||||
# cris/Makefile
|
||||
#
|
||||
# This file is included by the global makefile so that you can add your own
|
||||
|
|
@ -15,6 +15,7 @@
|
|||
|
||||
arch-y := v10
|
||||
arch-$(CONFIG_ETRAX_ARCH_V10) := v10
|
||||
arch-$(CONFIG_ETRAX_ARCH_V32) := v32
|
||||
|
||||
# No config avaiable for make clean etc
|
||||
ifneq ($(arch-y),)
|
||||
|
|
@ -46,6 +47,21 @@ core-y += arch/$(ARCH)/$(SARCH)/kernel/ arch/$(ARCH)/$(SARCH)/mm/
|
|||
drivers-y += arch/$(ARCH)/$(SARCH)/drivers/
|
||||
libs-y += arch/$(ARCH)/$(SARCH)/lib/ $(LIBGCC)
|
||||
|
||||
# cris source path
|
||||
SRC_ARCH = $(srctree)/arch/$(ARCH)
|
||||
# cris object files path
|
||||
OBJ_ARCH = $(objtree)/arch/$(ARCH)
|
||||
|
||||
target_boot_arch_dir = $(OBJ_ARCH)/$(SARCH)/boot
|
||||
target_boot_dir = $(OBJ_ARCH)/boot
|
||||
src_boot_dir = $(SRC_ARCH)/boot
|
||||
target_compressed_dir = $(OBJ_ARCH)/boot/compressed
|
||||
src_compressed_dir = $(SRC_ARCH)/boot/compressed
|
||||
target_rescue_dir = $(OBJ_ARCH)/boot/rescue
|
||||
src_rescue_dir = $(SRC_ARCH)/boot/rescue
|
||||
|
||||
export target_boot_arch_dir target_boot_dir src_boot_dir target_compressed_dir src_compressed_dir target_rescue_dir src_rescue_dir
|
||||
|
||||
vmlinux.bin: vmlinux
|
||||
$(OBJCOPY) $(OBJCOPYFLAGS) vmlinux vmlinux.bin
|
||||
|
||||
|
|
@ -65,44 +81,52 @@ cramfs:
|
|||
|
||||
clinux: vmlinux.bin decompress.bin rescue.bin
|
||||
|
||||
decompress.bin: FORCE
|
||||
@make -C arch/$(ARCH)/boot/compressed decompress.bin
|
||||
decompress.bin: $(target_boot_dir)
|
||||
@$(MAKE) -f $(src_compressed_dir)/Makefile $(target_compressed_dir)/decompress.bin
|
||||
|
||||
rescue.bin: FORCE
|
||||
@make -C arch/$(ARCH)/boot/rescue rescue.bin
|
||||
$(target_rescue_dir)/rescue.bin: $(target_boot_dir)
|
||||
@$(MAKE) -f $(src_rescue_dir)/Makefile $(target_rescue_dir)/rescue.bin
|
||||
|
||||
zImage: vmlinux.bin rescue.bin
|
||||
zImage: $(target_boot_dir) vmlinux.bin $(target_rescue_dir)/rescue.bin
|
||||
## zImage - Compressed kernel (gzip)
|
||||
@make -C arch/$(ARCH)/boot/ zImage
|
||||
@$(MAKE) -f $(src_boot_dir)/Makefile zImage
|
||||
|
||||
$(target_boot_dir): $(target_boot_arch_dir)
|
||||
ln -sfn $< $@
|
||||
|
||||
$(target_boot_arch_dir):
|
||||
mkdir -p $@
|
||||
|
||||
compressed: zImage
|
||||
|
||||
archmrproper:
|
||||
archclean:
|
||||
$(Q)$(MAKE) $(clean)=arch/$(ARCH)/boot
|
||||
@if [ -d arch/$(ARCH)/boot ]; then \
|
||||
$(MAKE) $(clean)=arch/$(ARCH)/boot ; \
|
||||
fi
|
||||
rm -f timage vmlinux.bin decompress.bin rescue.bin cramfs.img
|
||||
rm -rf $(LD_SCRIPT).tmp
|
||||
|
||||
prepare: arch/$(ARCH)/.links include/asm-$(ARCH)/.arch \
|
||||
prepare: $(SRC_ARCH)/.links $(srctree)/include/asm-$(ARCH)/.arch \
|
||||
include/asm-$(ARCH)/$(SARCH)/offset.h
|
||||
|
||||
# Create some links to make all tools happy
|
||||
arch/$(ARCH)/.links:
|
||||
@rm -rf arch/$(ARCH)/drivers
|
||||
@ln -sfn $(SARCH)/drivers arch/$(ARCH)/drivers
|
||||
@rm -rf arch/$(ARCH)/boot
|
||||
@ln -sfn $(SARCH)/boot arch/$(ARCH)/boot
|
||||
@rm -rf arch/$(ARCH)/lib
|
||||
@ln -sfn $(SARCH)/lib arch/$(ARCH)/lib
|
||||
@ln -sfn $(SARCH) arch/$(ARCH)/arch
|
||||
@ln -sfn ../$(SARCH)/vmlinux.lds.S arch/$(ARCH)/kernel/vmlinux.lds.S
|
||||
$(SRC_ARCH)/.links:
|
||||
@rm -rf $(SRC_ARCH)/drivers
|
||||
@ln -sfn $(SRC_ARCH)/$(SARCH)/drivers $(SRC_ARCH)/drivers
|
||||
@rm -rf $(SRC_ARCH)/boot
|
||||
@ln -sfn $(SRC_ARCH)/$(SARCH)/boot $(SRC_ARCH)/boot
|
||||
@rm -rf $(SRC_ARCH)/lib
|
||||
@ln -sfn $(SRC_ARCH)/$(SARCH)/lib $(SRC_ARCH)/lib
|
||||
@ln -sfn $(SRC_ARCH)/$(SARCH) $(SRC_ARCH)/arch
|
||||
@ln -sfn $(SRC_ARCH)/$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S
|
||||
@touch $@
|
||||
|
||||
# Create link to sub arch includes
|
||||
include/asm-$(ARCH)/.arch: $(wildcard include/config/arch/*.h)
|
||||
@echo ' Making asm-$(ARCH)/arch -> asm-$(ARCH)/$(SARCH) symlink'
|
||||
$(srctree)/include/asm-$(ARCH)/.arch: $(wildcard include/config/arch/*.h)
|
||||
@echo ' Making $(srctree)/include/asm-$(ARCH)/arch -> $(srctree)/include/asm-$(ARCH)/$(SARCH) symlink'
|
||||
@rm -f include/asm-$(ARCH)/arch
|
||||
@ln -sf $(SARCH) include/asm-$(ARCH)/arch
|
||||
@ln -sf $(srctree)/include/asm-$(ARCH)/$(SARCH) $(srctree)/include/asm-$(ARCH)/arch
|
||||
@touch $@
|
||||
|
||||
arch/$(ARCH)/$(SARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \
|
||||
|
|
|
|||
|
|
@ -259,6 +259,37 @@ config ETRAX_DEBUG_PORT_NULL
|
|||
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "Kernel GDB port"
|
||||
depends on ETRAX_KGDB
|
||||
default ETRAX_KGDB_PORT0
|
||||
help
|
||||
Choose a serial port for kernel debugging. NOTE: This port should
|
||||
not be enabled under Drivers for built-in interfaces (as it has its
|
||||
own initialization code) and should not be the same as the debug port.
|
||||
|
||||
config ETRAX_KGDB_PORT0
|
||||
bool "Serial-0"
|
||||
help
|
||||
Use serial port 0 for kernel debugging.
|
||||
|
||||
config ETRAX_KGDB_PORT1
|
||||
bool "Serial-1"
|
||||
help
|
||||
Use serial port 1 for kernel debugging.
|
||||
|
||||
config ETRAX_KGDB_PORT2
|
||||
bool "Serial-2"
|
||||
help
|
||||
Use serial port 2 for kernel debugging.
|
||||
|
||||
config ETRAX_KGDB_PORT3
|
||||
bool "Serial-3"
|
||||
help
|
||||
Use serial port 3 for kernel debugging.
|
||||
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "Product rescue-port"
|
||||
depends on ETRAX_ARCH_V10
|
||||
|
|
|
|||
|
|
@ -1,12 +1,13 @@
|
|||
#
|
||||
# arch/cris/boot/Makefile
|
||||
#
|
||||
target = $(target_boot_dir)
|
||||
src = $(src_boot_dir)
|
||||
|
||||
zImage: compressed/vmlinuz
|
||||
|
||||
compressed/vmlinuz: $(TOPDIR)/vmlinux
|
||||
@$(MAKE) -C compressed vmlinuz
|
||||
compressed/vmlinuz:
|
||||
@$(MAKE) -f $(src)/compressed/Makefile $(target_compressed_dir)/vmlinuz
|
||||
|
||||
clean:
|
||||
rm -f zImage tools/build compressed/vmlinux.out
|
||||
@$(MAKE) -C compressed clean
|
||||
@$(MAKE) -f $(src)/compressed/Makefile clean
|
||||
|
|
|
|||
|
|
@ -1,40 +1,45 @@
|
|||
#
|
||||
# linux/arch/etrax100/boot/compressed/Makefile
|
||||
#
|
||||
# create a compressed vmlinux image from the original vmlinux files and romfs
|
||||
# create a compressed vmlinuz image from the binary vmlinux.bin file
|
||||
#
|
||||
target = $(target_compressed_dir)
|
||||
src = $(src_compressed_dir)
|
||||
|
||||
CC = gcc-cris -melf -I $(TOPDIR)/include
|
||||
CC = gcc-cris -melf $(LINUXINCLUDE)
|
||||
CFLAGS = -O2
|
||||
LD = ld-cris
|
||||
OBJCOPY = objcopy-cris
|
||||
OBJCOPYFLAGS = -O binary --remove-section=.bss
|
||||
OBJECTS = head.o misc.o
|
||||
OBJECTS = $(target)/head.o $(target)/misc.o
|
||||
|
||||
# files to compress
|
||||
SYSTEM = $(TOPDIR)/vmlinux.bin
|
||||
SYSTEM = $(objtree)/vmlinux.bin
|
||||
|
||||
all: vmlinuz
|
||||
all: $(target_compressed_dir)/vmlinuz
|
||||
|
||||
decompress.bin: $(OBJECTS)
|
||||
$(LD) -T decompress.ld -o decompress.o $(OBJECTS)
|
||||
$(OBJCOPY) $(OBJCOPYFLAGS) decompress.o decompress.bin
|
||||
# save it for mkprod in the topdir.
|
||||
cp decompress.bin $(TOPDIR)
|
||||
$(target)/decompress.bin: $(OBJECTS)
|
||||
$(LD) -T $(src)/decompress.ld -o $(target)/decompress.o $(OBJECTS)
|
||||
$(OBJCOPY) $(OBJCOPYFLAGS) $(target)/decompress.o $(target)/decompress.bin
|
||||
|
||||
# Create vmlinuz image in top-level build directory
|
||||
$(target_compressed_dir)/vmlinuz: $(target) piggy.img $(target)/decompress.bin
|
||||
@echo " COMPR vmlinux.bin --> vmlinuz"
|
||||
@cat $(target)/decompress.bin piggy.img > $(target_compressed_dir)/vmlinuz
|
||||
@rm -f piggy.img
|
||||
|
||||
vmlinuz: piggy.img decompress.bin
|
||||
cat decompress.bin piggy.img > vmlinuz
|
||||
rm -f piggy.img
|
||||
$(target)/head.o: $(src)/head.S
|
||||
$(CC) -D__ASSEMBLY__ -traditional -c $< -o $@
|
||||
|
||||
head.o: head.S
|
||||
$(CC) -D__ASSEMBLY__ -traditional -c head.S -o head.o
|
||||
$(target)/misc.o: $(src)/misc.c
|
||||
$(CC) -D__KERNEL__ -c $< -o $@
|
||||
|
||||
# gzip the kernel image
|
||||
|
||||
piggy.img: $(SYSTEM)
|
||||
cat $(SYSTEM) | gzip -f -9 > piggy.img
|
||||
@cat $(SYSTEM) | gzip -f -9 > piggy.img
|
||||
|
||||
$(target):
|
||||
mkdir -p $(target)
|
||||
|
||||
clean:
|
||||
rm -f piggy.img vmlinuz vmlinuz.o
|
||||
rm -f piggy.img $(objtree)/vmlinuz
|
||||
|
||||
|
|
|
|||
|
|
@ -1,52 +1,53 @@
|
|||
#
|
||||
# Makefile for rescue code
|
||||
#
|
||||
ifndef TOPDIR
|
||||
TOPDIR = ../../../..
|
||||
endif
|
||||
CC = gcc-cris -mlinux -I $(TOPDIR)/include
|
||||
target = $(target_rescue_dir)
|
||||
src = $(src_rescue_dir)
|
||||
|
||||
CC = gcc-cris -mlinux $(LINUXINCLUDE)
|
||||
CFLAGS = -O2
|
||||
LD = gcc-cris -mlinux -nostdlib
|
||||
OBJCOPY = objcopy-cris
|
||||
OBJCOPYFLAGS = -O binary --remove-section=.bss
|
||||
|
||||
all: rescue.bin testrescue.bin kimagerescue.bin
|
||||
all: $(target)/rescue.bin $(target)/testrescue.bin $(target)/kimagerescue.bin
|
||||
|
||||
rescue: rescue.bin
|
||||
# do nothing
|
||||
$(target)/rescue.bin: $(target) $(target)/head.o
|
||||
$(LD) -T $(src)/rescue.ld -o $(target)/rescue.o $(target)/head.o
|
||||
$(OBJCOPY) $(OBJCOPYFLAGS) $(target)/rescue.o $(target)/rescue.bin
|
||||
# Place a copy in top-level build directory
|
||||
cp -p $(target)/rescue.bin $(objtree)
|
||||
|
||||
rescue.bin: head.o
|
||||
$(LD) -T rescue.ld -o rescue.o head.o
|
||||
$(OBJCOPY) $(OBJCOPYFLAGS) rescue.o rescue.bin
|
||||
cp rescue.bin $(TOPDIR)
|
||||
|
||||
testrescue.bin: testrescue.o
|
||||
$(OBJCOPY) $(OBJCOPYFLAGS) testrescue.o tr.bin
|
||||
$(target)/testrescue.bin: $(target) $(target)/testrescue.o
|
||||
$(OBJCOPY) $(OBJCOPYFLAGS) $(target)/testrescue.o tr.bin
|
||||
# Pad it to 784 bytes
|
||||
dd if=/dev/zero of=tmp2423 bs=1 count=784
|
||||
cat tr.bin tmp2423 >testrescue_tmp.bin
|
||||
dd if=testrescue_tmp.bin of=testrescue.bin bs=1 count=784
|
||||
dd if=testrescue_tmp.bin of=$(target)/testrescue.bin bs=1 count=784
|
||||
rm tr.bin tmp2423 testrescue_tmp.bin
|
||||
|
||||
kimagerescue.bin: kimagerescue.o
|
||||
$(OBJCOPY) $(OBJCOPYFLAGS) kimagerescue.o ktr.bin
|
||||
$(target)/kimagerescue.bin: $(target) $(target)/kimagerescue.o
|
||||
$(OBJCOPY) $(OBJCOPYFLAGS) $(target)/kimagerescue.o ktr.bin
|
||||
# Pad it to 784 bytes, that's what the rescue loader expects
|
||||
dd if=/dev/zero of=tmp2423 bs=1 count=784
|
||||
cat ktr.bin tmp2423 >kimagerescue_tmp.bin
|
||||
dd if=kimagerescue_tmp.bin of=kimagerescue.bin bs=1 count=784
|
||||
dd if=kimagerescue_tmp.bin of=$(target)/kimagerescue.bin bs=1 count=784
|
||||
rm ktr.bin tmp2423 kimagerescue_tmp.bin
|
||||
|
||||
head.o: head.S
|
||||
$(target):
|
||||
mkdir -p $(target)
|
||||
|
||||
$(target)/head.o: $(src)/head.S
|
||||
$(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
|
||||
|
||||
testrescue.o: testrescue.S
|
||||
$(target)/testrescue.o: $(src)/testrescue.S
|
||||
$(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
|
||||
|
||||
kimagerescue.o: kimagerescue.S
|
||||
$(target)/kimagerescue.o: $(src)/kimagerescue.S
|
||||
$(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
|
||||
|
||||
clean:
|
||||
rm -f *.o *.bin
|
||||
rm -f $(target)/*.o $(target)/*.bin
|
||||
|
||||
fastdep:
|
||||
|
||||
|
|
|
|||
|
|
@ -1,17 +1,11 @@
|
|||
config ETRAX_ETHERNET
|
||||
bool "Ethernet support"
|
||||
depends on ETRAX_ARCH_V10
|
||||
select NET_ETHERNET
|
||||
help
|
||||
This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
|
||||
controller.
|
||||
|
||||
# this is just so that the user does not have to go into the
|
||||
# normal ethernet driver section just to enable ethernetworking
|
||||
config NET_ETHERNET
|
||||
bool
|
||||
depends on ETRAX_ETHERNET
|
||||
default y
|
||||
|
||||
choice
|
||||
prompt "Network LED behavior"
|
||||
depends on ETRAX_ETHERNET
|
||||
|
|
@ -20,26 +14,26 @@ choice
|
|||
config ETRAX_NETWORK_LED_ON_WHEN_LINK
|
||||
bool "LED_on_when_link"
|
||||
help
|
||||
Selecting LED_on_when_link will light the LED when there is a
|
||||
connection and will flash off when there is activity.
|
||||
Selecting LED_on_when_link will light the LED when there is a
|
||||
connection and will flash off when there is activity.
|
||||
|
||||
Selecting LED_on_when_activity will light the LED only when
|
||||
Selecting LED_on_when_activity will light the LED only when
|
||||
there is activity.
|
||||
|
||||
This setting will also affect the behaviour of other activity LEDs
|
||||
e.g. Bluetooth.
|
||||
This setting will also affect the behaviour of other activity LEDs
|
||||
e.g. Bluetooth.
|
||||
|
||||
config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
|
||||
bool "LED_on_when_activity"
|
||||
help
|
||||
Selecting LED_on_when_link will light the LED when there is a
|
||||
connection and will flash off when there is activity.
|
||||
Selecting LED_on_when_link will light the LED when there is a
|
||||
connection and will flash off when there is activity.
|
||||
|
||||
Selecting LED_on_when_activity will light the LED only when
|
||||
Selecting LED_on_when_activity will light the LED only when
|
||||
there is activity.
|
||||
|
||||
This setting will also affect the behaviour of other activity LEDs
|
||||
e.g. Bluetooth.
|
||||
This setting will also affect the behaviour of other activity LEDs
|
||||
e.g. Bluetooth.
|
||||
|
||||
endchoice
|
||||
|
||||
|
|
@ -91,11 +85,11 @@ choice
|
|||
depends on ETRAX_SERIAL_PORT0
|
||||
default ETRAX_SERIAL_PORT0_DMA6_OUT
|
||||
|
||||
config CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT
|
||||
bool "No DMA out"
|
||||
config ETRAX_SERIAL_PORT0_NO_DMA_OUT
|
||||
bool "No DMA out"
|
||||
|
||||
config CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
|
||||
bool "DMA 6"
|
||||
config ETRAX_SERIAL_PORT0_DMA6_OUT
|
||||
bool "DMA 6"
|
||||
|
||||
endchoice
|
||||
|
||||
|
|
@ -104,11 +98,11 @@ choice
|
|||
depends on ETRAX_SERIAL_PORT0
|
||||
default ETRAX_SERIAL_PORT0_DMA7_IN
|
||||
|
||||
config CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN
|
||||
bool "No DMA in"
|
||||
config ETRAX_SERIAL_PORT0_NO_DMA_IN
|
||||
bool "No DMA in"
|
||||
|
||||
config CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
|
||||
bool "DMA 7"
|
||||
config ETRAX_SERIAL_PORT0_DMA7_IN
|
||||
bool "DMA 7"
|
||||
|
||||
endchoice
|
||||
|
||||
|
|
@ -205,11 +199,11 @@ choice
|
|||
depends on ETRAX_SERIAL_PORT1
|
||||
default ETRAX_SERIAL_PORT1_DMA8_OUT
|
||||
|
||||
config CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_OUT
|
||||
bool "No DMA out"
|
||||
config ETRAX_SERIAL_PORT1_NO_DMA_OUT
|
||||
bool "No DMA out"
|
||||
|
||||
config CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT
|
||||
bool "DMA 8"
|
||||
config ETRAX_SERIAL_PORT1_DMA8_OUT
|
||||
bool "DMA 8"
|
||||
|
||||
endchoice
|
||||
|
||||
|
|
@ -218,11 +212,11 @@ choice
|
|||
depends on ETRAX_SERIAL_PORT1
|
||||
default ETRAX_SERIAL_PORT1_DMA9_IN
|
||||
|
||||
config CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_IN
|
||||
bool "No DMA in"
|
||||
config ETRAX_SERIAL_PORT1_NO_DMA_IN
|
||||
bool "No DMA in"
|
||||
|
||||
config CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN
|
||||
bool "DMA 9"
|
||||
config ETRAX_SERIAL_PORT1_DMA9_IN
|
||||
bool "DMA 9"
|
||||
|
||||
endchoice
|
||||
|
||||
|
|
@ -308,7 +302,7 @@ config ETRAX_SER1_CD_ON_PB_BIT
|
|||
Specify the pin of the PB port to carry the CD signal for serial
|
||||
port 1.
|
||||
|
||||
comment "Make sure you dont have the same PB bits more than once!"
|
||||
comment "Make sure you do not have the same PB bits more than once!"
|
||||
depends on ETRAX_SERIAL && ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && ETRAX_SER1_DTR_RI_DSR_CD_ON_PB
|
||||
|
||||
config ETRAX_SERIAL_PORT2
|
||||
|
|
@ -322,11 +316,11 @@ choice
|
|||
depends on ETRAX_SERIAL_PORT2
|
||||
default ETRAX_SERIAL_PORT2_DMA2_OUT
|
||||
|
||||
config CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT
|
||||
bool "No DMA out"
|
||||
config ETRAX_SERIAL_PORT2_NO_DMA_OUT
|
||||
bool "No DMA out"
|
||||
|
||||
config CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
|
||||
bool "DMA 2"
|
||||
config ETRAX_SERIAL_PORT2_DMA2_OUT
|
||||
bool "DMA 2"
|
||||
|
||||
endchoice
|
||||
|
||||
|
|
@ -335,11 +329,11 @@ choice
|
|||
depends on ETRAX_SERIAL_PORT2
|
||||
default ETRAX_SERIAL_PORT2_DMA3_IN
|
||||
|
||||
config CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN
|
||||
bool "No DMA in"
|
||||
config ETRAX_SERIAL_PORT2_NO_DMA_IN
|
||||
bool "No DMA in"
|
||||
|
||||
config CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
|
||||
bool "DMA 3"
|
||||
config ETRAX_SERIAL_PORT2_DMA3_IN
|
||||
bool "DMA 3"
|
||||
|
||||
endchoice
|
||||
|
||||
|
|
@ -436,11 +430,11 @@ choice
|
|||
depends on ETRAX_SERIAL_PORT3
|
||||
default ETRAX_SERIAL_PORT3_DMA4_OUT
|
||||
|
||||
config CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_OUT
|
||||
bool "No DMA out"
|
||||
config ETRAX_SERIAL_PORT3_NO_DMA_OUT
|
||||
bool "No DMA out"
|
||||
|
||||
config CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT
|
||||
bool "DMA 4"
|
||||
config ETRAX_SERIAL_PORT3_DMA4_OUT
|
||||
bool "DMA 4"
|
||||
|
||||
endchoice
|
||||
|
||||
|
|
@ -449,11 +443,11 @@ choice
|
|||
depends on ETRAX_SERIAL_PORT3
|
||||
default ETRAX_SERIAL_PORT3_DMA5_IN
|
||||
|
||||
config CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_IN
|
||||
bool "No DMA in"
|
||||
config ETRAX_SERIAL_PORT3_NO_DMA_IN
|
||||
bool "No DMA in"
|
||||
|
||||
config CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN
|
||||
bool "DMA 5"
|
||||
config ETRAX_SERIAL_PORT3_DMA5_IN
|
||||
bool "DMA 5"
|
||||
|
||||
endchoice
|
||||
|
||||
|
|
@ -554,7 +548,6 @@ config ETRAX_IDE
|
|||
select BLK_DEV_IDEDISK
|
||||
select BLK_DEV_IDECD
|
||||
select BLK_DEV_IDEDMA
|
||||
select DMA_NONPCI
|
||||
help
|
||||
Enable this to get support for ATA/IDE.
|
||||
You can't use paralell ports or SCSI ports
|
||||
|
|
@ -579,7 +572,7 @@ config ETRAX_IDE_PB7_RESET
|
|||
IDE reset on pin 7 on port B
|
||||
|
||||
config ETRAX_IDE_G27_RESET
|
||||
bool "Port_G_Bit_27"
|
||||
bool "Port_G_Bit_27"
|
||||
help
|
||||
IDE reset on pin 27 on port G
|
||||
|
||||
|
|
@ -588,30 +581,36 @@ endchoice
|
|||
|
||||
config ETRAX_USB_HOST
|
||||
bool "USB host"
|
||||
select USB
|
||||
help
|
||||
This option enables the host functionality of the ETRAX 100LX
|
||||
built-in USB controller. In host mode the controller is designed
|
||||
for CTRL and BULK traffic only, INTR traffic may work as well
|
||||
however (depending on the requirements of timeliness).
|
||||
|
||||
config USB
|
||||
tristate
|
||||
depends on ETRAX_USB_HOST
|
||||
default y
|
||||
|
||||
config ETRAX_USB_HOST_PORT1
|
||||
bool " USB port 1 enabled"
|
||||
depends on ETRAX_USB_HOST
|
||||
default n
|
||||
bool "USB port 1 enabled"
|
||||
depends on ETRAX_USB_HOST
|
||||
default n
|
||||
|
||||
config ETRAX_USB_HOST_PORT2
|
||||
bool " USB port 2 enabled"
|
||||
depends on ETRAX_USB_HOST
|
||||
default n
|
||||
bool "USB port 2 enabled"
|
||||
depends on ETRAX_USB_HOST
|
||||
default n
|
||||
|
||||
config ETRAX_AXISFLASHMAP
|
||||
bool "Axis flash-map support"
|
||||
depends on ETRAX_ARCH_V10
|
||||
select MTD
|
||||
select MTD_CFI
|
||||
select MTD_CFI_AMDSTD
|
||||
select MTD_OBSOLETE_CHIPS
|
||||
select MTD_AMDSTD
|
||||
select MTD_CHAR
|
||||
select MTD_BLOCK
|
||||
select MTD_PARTITIONS
|
||||
select MTD_CONCAT
|
||||
select MTD_COMPLEX_MAPPINGS
|
||||
help
|
||||
This option enables MTD mapping of flash devices. Needed to use
|
||||
flash memories. If unsure, say Y.
|
||||
|
|
@ -627,119 +626,6 @@ config ETRAX_PTABLE_SECTOR
|
|||
for changing this is when the flash block size is bigger
|
||||
than 64kB (e.g. when using two parallel 16 bit flashes).
|
||||
|
||||
# here we define the CONFIG_'s necessary to enable MTD support
|
||||
# for the flash
|
||||
config MTD
|
||||
tristate
|
||||
depends on ETRAX_AXISFLASHMAP
|
||||
default y
|
||||
help
|
||||
Memory Technology Devices are flash, RAM and similar chips, often
|
||||
used for solid state file systems on embedded devices. This option
|
||||
will provide the generic support for MTD drivers to register
|
||||
themselves with the kernel and for potential users of MTD devices
|
||||
to enumerate the devices which are present and obtain a handle on
|
||||
them. It will also allow you to select individual drivers for
|
||||
particular hardware and users of MTD devices. If unsure, say N.
|
||||
|
||||
config MTD_CFI
|
||||
tristate
|
||||
depends on ETRAX_AXISFLASHMAP
|
||||
default y
|
||||
help
|
||||
The Common Flash Interface specification was developed by Intel,
|
||||
AMD and other flash manufactures that provides a universal method
|
||||
for probing the capabilities of flash devices. If you wish to
|
||||
support any device that is CFI-compliant, you need to enable this
|
||||
option. Visit <http://www.amd.com/products/nvd/overview/cfi.html>
|
||||
for more information on CFI.
|
||||
|
||||
config MTD_CFI_AMDSTD
|
||||
tristate
|
||||
depends on ETRAX_AXISFLASHMAP
|
||||
default y
|
||||
help
|
||||
The Common Flash Interface defines a number of different command
|
||||
sets which a CFI-compliant chip may claim to implement. This code
|
||||
provides support for one of those command sets, used on chips
|
||||
chips including the AMD Am29LV320.
|
||||
|
||||
config MTD_OBSOLETE_CHIPS
|
||||
bool
|
||||
depends on ETRAX_AXISFLASHMAP
|
||||
default y
|
||||
help
|
||||
This option does not enable any code directly, but will allow you to
|
||||
select some other chip drivers which are now considered obsolete,
|
||||
because the generic CONFIG_JEDEC_PROBE code above should now detect
|
||||
the chips which are supported by these drivers, and allow the generic
|
||||
CFI-compatible drivers to drive the chips. Say 'N' here unless you have
|
||||
already tried the CONFIG_JEDEC_PROBE method and reported its failure
|
||||
to the MTD mailing list at <linux-mtd@lists.infradead.org>
|
||||
|
||||
config MTD_AMDSTD
|
||||
tristate
|
||||
depends on ETRAX_AXISFLASHMAP
|
||||
default y
|
||||
help
|
||||
This option enables support for flash chips using AMD-compatible
|
||||
commands, including some which are not CFI-compatible and hence
|
||||
cannot be used with the CONFIG_MTD_CFI_AMDSTD option.
|
||||
|
||||
It also works on AMD compatible chips that do conform to CFI.
|
||||
|
||||
config MTD_CHAR
|
||||
tristate
|
||||
depends on ETRAX_AXISFLASHMAP
|
||||
default y
|
||||
help
|
||||
This provides a character device for each MTD device present in
|
||||
the system, allowing the user to read and write directly to the
|
||||
memory chips, and also use ioctl() to obtain information about
|
||||
the device, or to erase parts of it.
|
||||
|
||||
config MTD_BLOCK
|
||||
tristate
|
||||
depends on ETRAX_AXISFLASHMAP
|
||||
default y
|
||||
---help---
|
||||
Although most flash chips have an erase size too large to be useful
|
||||
as block devices, it is possible to use MTD devices which are based
|
||||
on RAM chips in this manner. This block device is a user of MTD
|
||||
devices performing that function.
|
||||
|
||||
At the moment, it is also required for the Journalling Flash File
|
||||
System(s) to obtain a handle on the MTD device when it's mounted
|
||||
(although JFFS and JFFS2 don't actually use any of the functionality
|
||||
of the mtdblock device).
|
||||
|
||||
Later, it may be extended to perform read/erase/modify/write cycles
|
||||
on flash chips to emulate a smaller block size. Needless to say,
|
||||
this is very unsafe, but could be useful for file systems which are
|
||||
almost never written to.
|
||||
|
||||
You do not need this option for use with the DiskOnChip devices. For
|
||||
those, enable NFTL support (CONFIG_NFTL) instead.
|
||||
|
||||
config MTD_PARTITIONS
|
||||
tristate
|
||||
depends on ETRAX_AXISFLASHMAP
|
||||
default y
|
||||
help
|
||||
If you have a device which needs to divide its flash chip(s) up
|
||||
into multiple 'partitions', each of which appears to the user as
|
||||
a separate MTD device, you require this option to be enabled. If
|
||||
unsure, say 'Y'.
|
||||
|
||||
Note, however, that you don't need this option for the DiskOnChip
|
||||
devices. Partitioning on NFTL 'devices' is a different - that's the
|
||||
'normal' form of partitioning used on a block device.
|
||||
|
||||
config MTD_CONCAT
|
||||
tristate
|
||||
depends on ETRAX_AXISFLASHMAP
|
||||
default y
|
||||
|
||||
config ETRAX_I2C
|
||||
bool "I2C support"
|
||||
depends on ETRAX_ARCH_V10
|
||||
|
|
@ -752,7 +638,7 @@ config ETRAX_I2C
|
|||
val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);
|
||||
|
||||
# this is true for most products since PB-I2C seems to be somewhat
|
||||
# flawed..
|
||||
# flawed..
|
||||
config ETRAX_I2C_USES_PB_NOT_PB_I2C
|
||||
bool "I2C uses PB not PB-I2C"
|
||||
depends on ETRAX_I2C
|
||||
|
|
@ -886,7 +772,7 @@ config ETRAX_RTC
|
|||
bool "Real Time Clock support"
|
||||
depends on ETRAX_ARCH_V10
|
||||
help
|
||||
Enables drivers for the Real-Time Clock battery-backed chips on
|
||||
Enables drivers for the Real-Time Clock battery-backed chips on
|
||||
some products. The kernel reads the time when booting, and
|
||||
the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a
|
||||
rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc
|
||||
|
|
@ -903,13 +789,13 @@ config ETRAX_DS1302
|
|||
bool "DS1302"
|
||||
help
|
||||
Enables the driver for the DS1302 Real-Time Clock battery-backed
|
||||
chip on some products.
|
||||
chip on some products.
|
||||
|
||||
config ETRAX_PCF8563
|
||||
bool "PCF8563"
|
||||
help
|
||||
Enables the driver for the PCF8563 Real-Time Clock battery-backed
|
||||
chip on some products.
|
||||
chip on some products.
|
||||
|
||||
endchoice
|
||||
|
||||
|
|
@ -954,10 +840,8 @@ config ETRAX_DS1302_TRICKLE_CHARGE
|
|||
help
|
||||
This controls the initial value of the trickle charge register.
|
||||
0 = disabled (use this if you are unsure or have a non rechargable battery)
|
||||
Otherwise the following values can be OR:ed together to control the
|
||||
Otherwise the following values can be OR:ed together to control the
|
||||
charge current:
|
||||
1 = 2kohm, 2 = 4kohm, 3 = 4kohm
|
||||
4 = 1 diode, 8 = 2 diodes
|
||||
Allowed values are (increasing current): 0, 11, 10, 9, 7, 6, 5
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -1,22 +1,27 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.11
|
||||
# Mon Jun 20 13:42:02 2005
|
||||
#
|
||||
CONFIG_MMU=y
|
||||
CONFIG_UID16=y
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_GENERIC_IOMAP=y
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
CONFIG_CRIS=y
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_CLEAN_COMPILE=y
|
||||
CONFIG_STANDALONE=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_SWAP=y
|
||||
CONFIG_LOCALVERSION=""
|
||||
# CONFIG_SWAP is not set
|
||||
# CONFIG_SYSVIPC is not set
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
|
|
@ -24,16 +29,19 @@ CONFIG_SYSCTL=y
|
|||
# CONFIG_AUDIT is not set
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
# CONFIG_HOTPLUG is not set
|
||||
CONFIG_KOBJECT_UEVENT=y
|
||||
# CONFIG_IKCONFIG is not set
|
||||
CONFIG_EMBEDDED=y
|
||||
# CONFIG_KALLSYMS is not set
|
||||
CONFIG_FUTEX=y
|
||||
CONFIG_EPOLL=y
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
CONFIG_IOSCHED_AS=y
|
||||
CONFIG_IOSCHED_DEADLINE=y
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||
CONFIG_SHMEM=y
|
||||
CONFIG_CC_ALIGN_FUNCTIONS=0
|
||||
CONFIG_CC_ALIGN_LABELS=0
|
||||
CONFIG_CC_ALIGN_LOOPS=0
|
||||
CONFIG_CC_ALIGN_JUMPS=0
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
|
|
@ -45,23 +53,28 @@ CONFIG_IOSCHED_CFQ=y
|
|||
#
|
||||
CONFIG_BINFMT_ELF=y
|
||||
# CONFIG_BINFMT_MISC is not set
|
||||
CONFIG_GENERIC_HARDIRQS=y
|
||||
# CONFIG_SMP is not set
|
||||
CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock3 init=/linuxrc"
|
||||
CONFIG_ETRAX_WATCHDOG=y
|
||||
CONFIG_ETRAX_WATCHDOG_NICE_DOGGY=y
|
||||
# CONFIG_ETRAX_WATCHDOG is not set
|
||||
CONFIG_ETRAX_FAST_TIMER=y
|
||||
# CONFIG_PREEMPT is not set
|
||||
# CONFIG_OOM_REBOOT is not set
|
||||
|
||||
#
|
||||
# Hardware setup
|
||||
#
|
||||
CONFIG_ETRAX100LX=y
|
||||
# CONFIG_ETRAX100LX_V2 is not set
|
||||
# CONFIG_ETRAX100LX is not set
|
||||
CONFIG_ETRAX100LX_V2=y
|
||||
# CONFIG_SVINTO_SIM is not set
|
||||
# CONFIG_ETRAXFS is not set
|
||||
# CONFIG_ETRAXFS_SIM is not set
|
||||
CONFIG_ETRAX_ARCH_V10=y
|
||||
CONFIG_ETRAX_DRAM_SIZE=16
|
||||
# CONFIG_ETRAX_ARCH_V32 is not set
|
||||
CONFIG_ETRAX_DRAM_SIZE=32
|
||||
CONFIG_ETRAX_FLASH_BUSWIDTH=2
|
||||
CONFIG_CRIS_LOW_MAP=y
|
||||
CONFIG_ETRAX_DRAM_VIRTUAL_BASE=60000000
|
||||
CONFIG_ETRAX_FLASH1_SIZE=4
|
||||
CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000
|
||||
CONFIG_ETRAX_PA_LEDS=y
|
||||
# CONFIG_ETRAX_PB_LEDS is not set
|
||||
# CONFIG_ETRAX_CSP0_LEDS is not set
|
||||
|
|
@ -81,13 +94,13 @@ CONFIG_ETRAX_RESCUE_SER0=y
|
|||
# CONFIG_ETRAX_RESCUE_SER1 is not set
|
||||
# CONFIG_ETRAX_RESCUE_SER2 is not set
|
||||
# CONFIG_ETRAX_RESCUE_SER3 is not set
|
||||
CONFIG_ETRAX_DEF_R_WAITSTATES=0x95f8
|
||||
CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x104
|
||||
CONFIG_ETRAX_DEF_R_WAITSTATES=0x95a6
|
||||
CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x4
|
||||
CONFIG_ETRAX_SDRAM=y
|
||||
CONFIG_ETRAX_DEF_R_SDRAM_CONFIG=0x00e03636
|
||||
CONFIG_ETRAX_DEF_R_SDRAM_CONFIG=0x09e05757
|
||||
CONFIG_ETRAX_DEF_R_SDRAM_TIMING=0x80008002
|
||||
CONFIG_ETRAX_DEF_R_PORT_PA_DIR=0x1d
|
||||
CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0xf0
|
||||
CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0x00
|
||||
CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=0x00
|
||||
CONFIG_ETRAX_DEF_R_PORT_PB_DIR=0x1e
|
||||
CONFIG_ETRAX_DEF_R_PORT_PB_DATA=0xf3
|
||||
|
|
@ -97,16 +110,17 @@ CONFIG_ETRAX_DEF_R_PORT_PB_DATA=0xf3
|
|||
# Drivers for built-in interfaces
|
||||
#
|
||||
CONFIG_ETRAX_ETHERNET=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set
|
||||
CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y
|
||||
CONFIG_ETRAX_SERIAL=y
|
||||
CONFIG_ETRAX_SERIAL_FAST_TIMER=y
|
||||
# CONFIG_ETRAX_SERIAL_FAST_TIMER is not set
|
||||
# CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST is not set
|
||||
CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS=5
|
||||
CONFIG_ETRAX_SERIAL_PORT0=y
|
||||
# CONFIG_CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT is not set
|
||||
CONFIG_CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT=y
|
||||
# CONFIG_CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN is not set
|
||||
CONFIG_CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN=y
|
||||
# CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT is not set
|
||||
CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT=y
|
||||
# CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN is not set
|
||||
CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN=y
|
||||
CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE=y
|
||||
# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PA is not set
|
||||
# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB is not set
|
||||
|
|
@ -121,10 +135,10 @@ CONFIG_ETRAX_SER0_DSR_ON_PB_BIT=-1
|
|||
CONFIG_ETRAX_SER0_CD_ON_PB_BIT=-1
|
||||
# CONFIG_ETRAX_SERIAL_PORT1 is not set
|
||||
CONFIG_ETRAX_SERIAL_PORT2=y
|
||||
# CONFIG_CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT is not set
|
||||
CONFIG_CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT=y
|
||||
# CONFIG_CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN is not set
|
||||
CONFIG_CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN=y
|
||||
# CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT is not set
|
||||
CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT=y
|
||||
# CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN is not set
|
||||
CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN=y
|
||||
CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE=y
|
||||
# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PA is not set
|
||||
# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PB is not set
|
||||
|
|
@ -138,44 +152,51 @@ CONFIG_ETRAX_SER2_RI_ON_PB_BIT=-1
|
|||
CONFIG_ETRAX_SER2_DSR_ON_PB_BIT=-1
|
||||
CONFIG_ETRAX_SER2_CD_ON_PB_BIT=-1
|
||||
# CONFIG_ETRAX_SERIAL_PORT3 is not set
|
||||
# CONFIG_ETRAX_RS485 is not set
|
||||
# CONFIG_ETRAX_IDE is not set
|
||||
# CONFIG_IDE is not set
|
||||
# CONFIG_ETRAX_USB_HOST is not set
|
||||
CONFIG_ETRAX_RS485=y
|
||||
# CONFIG_ETRAX_RS485_ON_PA is not set
|
||||
# CONFIG_ETRAX_RS485_DISABLE_RECEIVER is not set
|
||||
CONFIG_ETRAX_IDE=y
|
||||
CONFIG_ETRAX_IDE_DELAY=15
|
||||
CONFIG_ETRAX_IDE_PB7_RESET=y
|
||||
# CONFIG_ETRAX_IDE_G27_RESET is not set
|
||||
CONFIG_ETRAX_USB_HOST=y
|
||||
CONFIG_ETRAX_USB_HOST_PORT1=y
|
||||
CONFIG_ETRAX_USB_HOST_PORT2=y
|
||||
CONFIG_ETRAX_AXISFLASHMAP=y
|
||||
CONFIG_ETRAX_PTABLE_SECTOR=65536
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_OBSOLETE_CHIPS=y
|
||||
CONFIG_MTD_AMDSTD=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CONCAT=y
|
||||
# CONFIG_ETRAX_I2C is not set
|
||||
CONFIG_ETRAX_GPIO=y
|
||||
CONFIG_ETRAX_PA_BUTTON_BITMASK=0x02
|
||||
CONFIG_ETRAX_PA_CHANGEABLE_DIR=0x00
|
||||
CONFIG_ETRAX_PA_CHANGEABLE_BITS=0xFF
|
||||
CONFIG_ETRAX_PB_CHANGEABLE_DIR=0x00
|
||||
CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF
|
||||
# CONFIG_ETRAX_RTC is not set
|
||||
# CONFIG_ETRAX_GPIO is not set
|
||||
CONFIG_ETRAX_RTC=y
|
||||
CONFIG_ETRAX_DS1302=y
|
||||
# CONFIG_ETRAX_PCF8563 is not set
|
||||
CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT=y
|
||||
CONFIG_ETRAX_DS1302_RSTBIT=0
|
||||
CONFIG_ETRAX_DS1302_SCLBIT=1
|
||||
CONFIG_ETRAX_DS1302_SDABIT=0
|
||||
CONFIG_ETRAX_DS1302_TRICKLE_CHARGE=0
|
||||
|
||||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
CONFIG_STANDALONE=y
|
||||
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||
# CONFIG_FW_LOADER is not set
|
||||
|
||||
#
|
||||
# Memory Technology Devices (MTD)
|
||||
#
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_DEBUG is not set
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_CONCAT=y
|
||||
# CONFIG_MTD_REDBOOT_PARTS is not set
|
||||
# CONFIG_MTD_CMDLINE_PARTS is not set
|
||||
|
||||
#
|
||||
# User Modules And Translation Layers
|
||||
#
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
# CONFIG_FTL is not set
|
||||
# CONFIG_NFTL is not set
|
||||
# CONFIG_INFTL is not set
|
||||
|
|
@ -183,14 +204,30 @@ CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF
|
|||
#
|
||||
# RAM/ROM/Flash chip drivers
|
||||
#
|
||||
CONFIG_MTD_CFI=y
|
||||
# CONFIG_MTD_JEDECPROBE is not set
|
||||
CONFIG_MTD_GEN_PROBE=y
|
||||
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
||||
CONFIG_MTD_CFI_I1=y
|
||||
CONFIG_MTD_CFI_I2=y
|
||||
# CONFIG_MTD_CFI_I4 is not set
|
||||
# CONFIG_MTD_CFI_I8 is not set
|
||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_CFI_AMDSTD_RETRY=0
|
||||
# CONFIG_MTD_CFI_STAA is not set
|
||||
CONFIG_MTD_CFI_UTIL=y
|
||||
CONFIG_MTD_RAM=y
|
||||
# CONFIG_MTD_ROM is not set
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
CONFIG_MTD_OBSOLETE_CHIPS=y
|
||||
CONFIG_MTD_AMDSTD=y
|
||||
# CONFIG_MTD_SHARP is not set
|
||||
# CONFIG_MTD_JEDEC is not set
|
||||
|
||||
|
|
@ -204,11 +241,13 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
|
|||
# Self-contained MTD device drivers
|
||||
#
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
# CONFIG_MTD_PHRAM is not set
|
||||
CONFIG_MTD_MTDRAM=y
|
||||
CONFIG_MTDRAM_TOTAL_SIZE=0
|
||||
CONFIG_MTDRAM_ERASE_SIZE=64
|
||||
CONFIG_MTDRAM_ABS_POS=0x0
|
||||
# CONFIG_MTD_BLKMTD is not set
|
||||
# CONFIG_MTD_BLOCK2MTD is not set
|
||||
|
||||
#
|
||||
# Disk-On-Chip Device Drivers
|
||||
|
|
@ -235,11 +274,25 @@ CONFIG_MTDRAM_ABS_POS=0x0
|
|||
# Block devices
|
||||
#
|
||||
# CONFIG_BLK_DEV_FD is not set
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
# CONFIG_BLK_DEV_LOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
# CONFIG_BLK_DEV_UB is not set
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=4096
|
||||
# CONFIG_BLK_DEV_INITRD is not set
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
# CONFIG_IOSCHED_AS is not set
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
|
|
@ -249,6 +302,28 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
|
|||
#
|
||||
# ATA/ATAPI/MFM/RLL support
|
||||
#
|
||||
CONFIG_IDE=y
|
||||
CONFIG_BLK_DEV_IDE=y
|
||||
|
||||
#
|
||||
# Please see Documentation/ide.txt for help/info on IDE drives
|
||||
#
|
||||
# CONFIG_BLK_DEV_IDE_SATA is not set
|
||||
CONFIG_BLK_DEV_IDEDISK=y
|
||||
# CONFIG_IDEDISK_MULTI_MODE is not set
|
||||
CONFIG_BLK_DEV_IDECD=y
|
||||
# CONFIG_BLK_DEV_IDETAPE is not set
|
||||
# CONFIG_BLK_DEV_IDEFLOPPY is not set
|
||||
# CONFIG_IDE_TASK_IOCTL is not set
|
||||
|
||||
#
|
||||
# IDE chipset support/bugfixes
|
||||
#
|
||||
# CONFIG_IDE_GENERIC is not set
|
||||
# CONFIG_IDE_ARM is not set
|
||||
CONFIG_BLK_DEV_IDEDMA=y
|
||||
# CONFIG_IDEDMA_AUTO is not set
|
||||
# CONFIG_BLK_DEV_HD is not set
|
||||
|
||||
#
|
||||
# SCSI device support
|
||||
|
|
@ -258,7 +333,6 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
|
|||
#
|
||||
# IEEE 1394 (FireWire) support
|
||||
#
|
||||
# CONFIG_IEEE1394 is not set
|
||||
|
||||
#
|
||||
# I2O device support
|
||||
|
|
@ -288,6 +362,9 @@ CONFIG_INET=y
|
|||
# CONFIG_INET_AH is not set
|
||||
# CONFIG_INET_ESP is not set
|
||||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
CONFIG_IP_TCPDIAG=y
|
||||
# CONFIG_IP_TCPDIAG_IPV6 is not set
|
||||
|
||||
#
|
||||
# IP: Virtual Server Configuration
|
||||
|
|
@ -301,11 +378,10 @@ CONFIG_NETFILTER=y
|
|||
# IP: Netfilter Configuration
|
||||
#
|
||||
# CONFIG_IP_NF_CONNTRACK is not set
|
||||
# CONFIG_IP_NF_CONNTRACK_MARK is not set
|
||||
# CONFIG_IP_NF_QUEUE is not set
|
||||
# CONFIG_IP_NF_IPTABLES is not set
|
||||
# CONFIG_IP_NF_ARPTABLES is not set
|
||||
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
|
||||
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
|
||||
|
||||
#
|
||||
# SCTP Configuration (EXPERIMENTAL)
|
||||
|
|
@ -323,12 +399,12 @@ CONFIG_NETFILTER=y
|
|||
# CONFIG_NET_DIVERT is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
# CONFIG_NET_HW_FLOWCONTROL is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
# CONFIG_NET_CLS_ROUTE is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
|
|
@ -338,7 +414,26 @@ CONFIG_NETFILTER=y
|
|||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_IRDA is not set
|
||||
# CONFIG_BT is not set
|
||||
CONFIG_BT=y
|
||||
CONFIG_BT_L2CAP=y
|
||||
# CONFIG_BT_SCO is not set
|
||||
CONFIG_BT_RFCOMM=y
|
||||
# CONFIG_BT_RFCOMM_TTY is not set
|
||||
CONFIG_BT_BNEP=y
|
||||
# CONFIG_BT_BNEP_MC_FILTER is not set
|
||||
# CONFIG_BT_BNEP_PROTO_FILTER is not set
|
||||
# CONFIG_BT_HIDP is not set
|
||||
|
||||
#
|
||||
# Bluetooth device drivers
|
||||
#
|
||||
CONFIG_BT_HCIUSB=y
|
||||
# CONFIG_BT_HCIUSB_SCO is not set
|
||||
# CONFIG_BT_HCIUART is not set
|
||||
# CONFIG_BT_HCIBCM203X is not set
|
||||
# CONFIG_BT_HCIBPA10X is not set
|
||||
# CONFIG_BT_HCIBFUSB is not set
|
||||
# CONFIG_BT_HCIVHCI is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_DUMMY is not set
|
||||
# CONFIG_BONDING is not set
|
||||
|
|
@ -348,6 +443,7 @@ CONFIG_NETDEVICES=y
|
|||
#
|
||||
# Ethernet (10 or 100Mbit)
|
||||
#
|
||||
CONFIG_NET_ETHERNET=y
|
||||
# CONFIG_MII is not set
|
||||
|
||||
#
|
||||
|
|
@ -389,11 +485,19 @@ CONFIG_NETDEVICES=y
|
|||
#
|
||||
# Input device support
|
||||
#
|
||||
# CONFIG_INPUT is not set
|
||||
CONFIG_INPUT=y
|
||||
|
||||
#
|
||||
# Userland interfaces
|
||||
#
|
||||
CONFIG_INPUT_MOUSEDEV=y
|
||||
CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_TSDEV is not set
|
||||
# CONFIG_INPUT_EVDEV is not set
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
#
|
||||
# Input I/O drivers
|
||||
|
|
@ -404,10 +508,25 @@ CONFIG_SERIO=y
|
|||
# CONFIG_SERIO_I8042 is not set
|
||||
# CONFIG_SERIO_SERPORT is not set
|
||||
# CONFIG_SERIO_CT82C710 is not set
|
||||
CONFIG_SERIO_LIBPS2=y
|
||||
# CONFIG_SERIO_RAW is not set
|
||||
|
||||
#
|
||||
# Input Device Drivers
|
||||
#
|
||||
CONFIG_INPUT_KEYBOARD=y
|
||||
CONFIG_KEYBOARD_ATKBD=y
|
||||
# CONFIG_KEYBOARD_SUNKBD is not set
|
||||
# CONFIG_KEYBOARD_LKKBD is not set
|
||||
# CONFIG_KEYBOARD_XTKBD is not set
|
||||
# CONFIG_KEYBOARD_NEWTON is not set
|
||||
CONFIG_INPUT_MOUSE=y
|
||||
CONFIG_MOUSE_PS2=y
|
||||
# CONFIG_MOUSE_SERIAL is not set
|
||||
# CONFIG_MOUSE_VSXXXAA is not set
|
||||
# CONFIG_INPUT_JOYSTICK is not set
|
||||
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||
# CONFIG_INPUT_MISC is not set
|
||||
|
||||
#
|
||||
# Character devices
|
||||
|
|
@ -426,7 +545,6 @@ CONFIG_SERIO=y
|
|||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
# CONFIG_QIC02_TAPE is not set
|
||||
|
||||
#
|
||||
# IPMI
|
||||
|
|
@ -441,13 +559,10 @@ CONFIG_LEGACY_PTY_COUNT=256
|
|||
# CONFIG_GEN_RTC is not set
|
||||
# CONFIG_DTLK is not set
|
||||
# CONFIG_R3964 is not set
|
||||
# CONFIG_APPLICOM is not set
|
||||
|
||||
#
|
||||
# Ftape, the floppy tape device driver
|
||||
#
|
||||
# CONFIG_FTAPE is not set
|
||||
# CONFIG_AGP is not set
|
||||
# CONFIG_DRM is not set
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
|
|
@ -469,10 +584,15 @@ CONFIG_LEGACY_PTY_COUNT=256
|
|||
# CONFIG_JBD is not set
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
|
||||
#
|
||||
# XFS support
|
||||
#
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
|
||||
|
|
@ -485,7 +605,8 @@ CONFIG_LEGACY_PTY_COUNT=256
|
|||
#
|
||||
# DOS/FAT/NT Filesystems
|
||||
#
|
||||
# CONFIG_FAT_FS is not set
|
||||
# CONFIG_MSDOS_FS is not set
|
||||
# CONFIG_VFAT_FS is not set
|
||||
# CONFIG_NTFS_FS is not set
|
||||
|
||||
#
|
||||
|
|
@ -497,6 +618,7 @@ CONFIG_SYSFS=y
|
|||
# CONFIG_DEVFS_FS is not set
|
||||
# CONFIG_DEVPTS_FS_XATTR is not set
|
||||
CONFIG_TMPFS=y
|
||||
# CONFIG_TMPFS_XATTR is not set
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
|
||||
|
|
@ -512,7 +634,15 @@ CONFIG_RAMFS=y
|
|||
# CONFIG_EFS_FS is not set
|
||||
CONFIG_JFFS_FS=y
|
||||
CONFIG_JFFS_FS_VERBOSE=0
|
||||
# CONFIG_JFFS2_FS is not set
|
||||
# CONFIG_JFFS_PROC_FS is not set
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_JFFS2_FS_DEBUG=0
|
||||
# CONFIG_JFFS2_FS_NAND is not set
|
||||
# CONFIG_JFFS2_FS_NOR_ECC is not set
|
||||
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
||||
CONFIG_JFFS2_ZLIB=y
|
||||
CONFIG_JFFS2_RTIME=y
|
||||
# CONFIG_JFFS2_RUBIN is not set
|
||||
CONFIG_CRAMFS=y
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_HPFS_FS is not set
|
||||
|
|
@ -530,14 +660,13 @@ CONFIG_NFS_V3=y
|
|||
# CONFIG_NFSD is not set
|
||||
CONFIG_LOCKD=y
|
||||
CONFIG_LOCKD_V4=y
|
||||
# CONFIG_EXPORTFS is not set
|
||||
CONFIG_SUNRPC=y
|
||||
# CONFIG_RPCSEC_GSS_KRB5 is not set
|
||||
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
||||
# CONFIG_SMB_FS is not set
|
||||
# CONFIG_CIFS is not set
|
||||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_INTERMEZZO_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
|
||||
#
|
||||
|
|
@ -556,9 +685,121 @@ CONFIG_MSDOS_PARTITION=y
|
|||
#
|
||||
# CONFIG_SOUND is not set
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
# PC-card bridges
|
||||
#
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
CONFIG_USB=y
|
||||
# CONFIG_USB_DEBUG is not set
|
||||
|
||||
#
|
||||
# Miscellaneous USB options
|
||||
#
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
# CONFIG_USB_BANDWIDTH is not set
|
||||
# CONFIG_USB_DYNAMIC_MINORS is not set
|
||||
# CONFIG_USB_OTG is not set
|
||||
# CONFIG_USB_ARCH_HAS_HCD is not set
|
||||
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
||||
|
||||
#
|
||||
# USB Host Controller Drivers
|
||||
#
|
||||
# CONFIG_USB_SL811_HCD is not set
|
||||
|
||||
#
|
||||
# USB Device Class drivers
|
||||
#
|
||||
|
||||
#
|
||||
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
|
||||
#
|
||||
# CONFIG_USB_ACM is not set
|
||||
# CONFIG_USB_PRINTER is not set
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
|
||||
#
|
||||
# CONFIG_USB_STORAGE is not set
|
||||
|
||||
#
|
||||
# USB Input Devices
|
||||
#
|
||||
# CONFIG_USB_HID is not set
|
||||
|
||||
#
|
||||
# USB HID Boot Protocol drivers
|
||||
#
|
||||
# CONFIG_USB_KBD is not set
|
||||
# CONFIG_USB_MOUSE is not set
|
||||
# CONFIG_USB_AIPTEK is not set
|
||||
# CONFIG_USB_WACOM is not set
|
||||
# CONFIG_USB_KBTAB is not set
|
||||
# CONFIG_USB_POWERMATE is not set
|
||||
# CONFIG_USB_MTOUCH is not set
|
||||
# CONFIG_USB_EGALAX is not set
|
||||
# CONFIG_USB_XPAD is not set
|
||||
# CONFIG_USB_ATI_REMOTE is not set
|
||||
|
||||
#
|
||||
# USB Imaging devices
|
||||
#
|
||||
# CONFIG_USB_MDC800 is not set
|
||||
|
||||
#
|
||||
# USB Multimedia devices
|
||||
#
|
||||
# CONFIG_USB_DABUSB is not set
|
||||
|
||||
#
|
||||
# Video4Linux support is needed for USB Multimedia device support
|
||||
#
|
||||
|
||||
#
|
||||
# USB Network Adapters
|
||||
#
|
||||
# CONFIG_USB_CATC is not set
|
||||
# CONFIG_USB_KAWETH is not set
|
||||
# CONFIG_USB_PEGASUS is not set
|
||||
CONFIG_USB_RTL8150=y
|
||||
# CONFIG_USB_USBNET is not set
|
||||
|
||||
#
|
||||
# USB port drivers
|
||||
#
|
||||
|
||||
#
|
||||
# USB Serial Converter support
|
||||
#
|
||||
# CONFIG_USB_SERIAL is not set
|
||||
|
||||
#
|
||||
# USB Miscellaneous drivers
|
||||
#
|
||||
# CONFIG_USB_EMI62 is not set
|
||||
# CONFIG_USB_EMI26 is not set
|
||||
# CONFIG_USB_AUERSWALD is not set
|
||||
# CONFIG_USB_RIO500 is not set
|
||||
# CONFIG_USB_LEGOTOWER is not set
|
||||
# CONFIG_USB_LCD is not set
|
||||
# CONFIG_USB_LED is not set
|
||||
# CONFIG_USB_CYTHERM is not set
|
||||
# CONFIG_USB_PHIDGETKIT is not set
|
||||
# CONFIG_USB_PHIDGETSERVO is not set
|
||||
# CONFIG_USB_IDMOUSE is not set
|
||||
# CONFIG_USB_TEST is not set
|
||||
|
||||
#
|
||||
# USB ATM/DSL drivers
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
|
|
@ -568,14 +809,17 @@ CONFIG_MSDOS_PARTITION=y
|
|||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PROFILE is not set
|
||||
# CONFIG_PROFILING is not set
|
||||
# CONFIG_SYSTEM_PROFILER is not set
|
||||
# CONFIG_ETRAX_KGDB is not set
|
||||
# CONFIG_DEBUG_INFO is not set
|
||||
# CONFIG_FRAME_POINTER is not set
|
||||
# CONFIG_DEBUG_NMI_OOPS is not set
|
||||
|
||||
#
|
||||
# Security options
|
||||
#
|
||||
# CONFIG_KEYS is not set
|
||||
# CONFIG_SECURITY is not set
|
||||
|
||||
#
|
||||
|
|
@ -583,9 +827,15 @@ CONFIG_MSDOS_PARTITION=y
|
|||
#
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
# Hardware crypto devices
|
||||
#
|
||||
|
||||
#
|
||||
# Library routines
|
||||
#
|
||||
# CONFIG_CRC32 is not set
|
||||
# CONFIG_CRC_CCITT is not set
|
||||
CONFIG_CRC32=y
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZLIB_DEFLATE=y
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
# $Id: Makefile,v 1.10 2004/05/14 10:18:12 starvik Exp $
|
||||
# $Id: Makefile,v 1.12 2004/10/19 13:07:43 starvik Exp $
|
||||
#
|
||||
# Makefile for the linux kernel.
|
||||
#
|
||||
|
|
@ -10,6 +10,7 @@ obj-y := process.o traps.o irq.o ptrace.o setup.o \
|
|||
|
||||
obj-$(CONFIG_MODULES) += crisksyms.o
|
||||
obj-$(CONFIG_MODULES) += module.o
|
||||
obj-$(CONFIG_SYSTEM_PROFILER) += profile.o
|
||||
|
||||
clean:
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user