forked from luck/tmp_suning_uos_patched
nvmem: add QTI SDAM driver
QTI SDAM driver allows PMIC peripherals to access the shared memory that is available on QTI PMICs. Use subsys_initcall as PMIC SDAM NV memory is accessed by multiple PMIC drivers (charger, fuel gauge) to store/restore data across reboots required during their initialization. Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Shyam Kumar Thella <sthella@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200116161100.30637-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Anirudh Ghayal
Greg Kroah-Hartman
parent
9664a6b54c
commit
40ce979879
|
|
@ -109,6 +109,14 @@ config QCOM_QFPROM
|
|||
This driver can also be built as a module. If so, the module
|
||||
will be called nvmem_qfprom.
|
||||
|
||||
config NVMEM_SPMI_SDAM
|
||||
tristate "SPMI SDAM Support"
|
||||
depends on SPMI
|
||||
help
|
||||
This driver supports the Shared Direct Access Memory Module on
|
||||
Qualcomm Technologies, Inc. PMICs. It provides the clients
|
||||
an interface to read/write to the SDAM module's shared memory.
|
||||
|
||||
config ROCKCHIP_EFUSE
|
||||
tristate "Rockchip eFuse Support"
|
||||
depends on ARCH_ROCKCHIP || COMPILE_TEST
|
||||
|
|
|
|||
|
|
@ -28,6 +28,8 @@ obj-$(CONFIG_MTK_EFUSE) += nvmem_mtk-efuse.o
|
|||
nvmem_mtk-efuse-y := mtk-efuse.o
|
||||
obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o
|
||||
nvmem_qfprom-y := qfprom.o
|
||||
obj-$(CONFIG_NVMEM_SPMI_SDAM) += nvmem_qcom-spmi-sdam.o
|
||||
nvmem_qcom-spmi-sdam-y += qcom-spmi-sdam.o
|
||||
obj-$(CONFIG_ROCKCHIP_EFUSE) += nvmem_rockchip_efuse.o
|
||||
nvmem_rockchip_efuse-y := rockchip-efuse.o
|
||||
obj-$(CONFIG_ROCKCHIP_OTP) += nvmem-rockchip-otp.o
|
||||
|
|
|
|||
192
drivers/nvmem/qcom-spmi-sdam.c
Normal file
192
drivers/nvmem/qcom-spmi-sdam.c
Normal file
|
|
@ -0,0 +1,192 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Copyright (c) 2017 The Linux Foundation. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <linux/device.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/nvmem-provider.h>
|
||||
#include <linux/regmap.h>
|
||||
|
||||
#define SDAM_MEM_START 0x40
|
||||
#define REGISTER_MAP_ID 0x40
|
||||
#define REGISTER_MAP_VERSION 0x41
|
||||
#define SDAM_SIZE 0x44
|
||||
#define SDAM_PBS_TRIG_SET 0xE5
|
||||
#define SDAM_PBS_TRIG_CLR 0xE6
|
||||
|
||||
struct sdam_chip {
|
||||
struct platform_device *pdev;
|
||||
struct regmap *regmap;
|
||||
struct nvmem_config sdam_config;
|
||||
unsigned int base;
|
||||
unsigned int size;
|
||||
};
|
||||
|
||||
/* read only register offsets */
|
||||
static const u8 sdam_ro_map[] = {
|
||||
REGISTER_MAP_ID,
|
||||
REGISTER_MAP_VERSION,
|
||||
SDAM_SIZE
|
||||
};
|
||||
|
||||
static bool sdam_is_valid(struct sdam_chip *sdam, unsigned int offset,
|
||||
size_t len)
|
||||
{
|
||||
unsigned int sdam_mem_end = SDAM_MEM_START + sdam->size - 1;
|
||||
|
||||
if (!len)
|
||||
return false;
|
||||
|
||||
if (offset >= SDAM_MEM_START && offset <= sdam_mem_end
|
||||
&& (offset + len - 1) <= sdam_mem_end)
|
||||
return true;
|
||||
else if ((offset == SDAM_PBS_TRIG_SET || offset == SDAM_PBS_TRIG_CLR)
|
||||
&& (len == 1))
|
||||
return true;
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
static bool sdam_is_ro(unsigned int offset, size_t len)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(sdam_ro_map); i++)
|
||||
if (offset <= sdam_ro_map[i] && (offset + len) > sdam_ro_map[i])
|
||||
return true;
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
static int sdam_read(void *priv, unsigned int offset, void *val,
|
||||
size_t bytes)
|
||||
{
|
||||
struct sdam_chip *sdam = priv;
|
||||
struct device *dev = &sdam->pdev->dev;
|
||||
int rc;
|
||||
|
||||
if (!sdam_is_valid(sdam, offset, bytes)) {
|
||||
dev_err(dev, "Invalid SDAM offset %#x len=%zd\n",
|
||||
offset, bytes);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
rc = regmap_bulk_read(sdam->regmap, sdam->base + offset, val, bytes);
|
||||
if (rc < 0)
|
||||
dev_err(dev, "Failed to read SDAM offset %#x len=%zd, rc=%d\n",
|
||||
offset, bytes, rc);
|
||||
|
||||
return rc;
|
||||
}
|
||||
|
||||
static int sdam_write(void *priv, unsigned int offset, void *val,
|
||||
size_t bytes)
|
||||
{
|
||||
struct sdam_chip *sdam = priv;
|
||||
struct device *dev = &sdam->pdev->dev;
|
||||
int rc;
|
||||
|
||||
if (!sdam_is_valid(sdam, offset, bytes)) {
|
||||
dev_err(dev, "Invalid SDAM offset %#x len=%zd\n",
|
||||
offset, bytes);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (sdam_is_ro(offset, bytes)) {
|
||||
dev_err(dev, "Invalid write offset %#x len=%zd\n",
|
||||
offset, bytes);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
rc = regmap_bulk_write(sdam->regmap, sdam->base + offset, val, bytes);
|
||||
if (rc < 0)
|
||||
dev_err(dev, "Failed to write SDAM offset %#x len=%zd, rc=%d\n",
|
||||
offset, bytes, rc);
|
||||
|
||||
return rc;
|
||||
}
|
||||
|
||||
static int sdam_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct sdam_chip *sdam;
|
||||
struct nvmem_device *nvmem;
|
||||
unsigned int val;
|
||||
int rc;
|
||||
|
||||
sdam = devm_kzalloc(&pdev->dev, sizeof(*sdam), GFP_KERNEL);
|
||||
if (!sdam)
|
||||
return -ENOMEM;
|
||||
|
||||
sdam->regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
||||
if (!sdam->regmap) {
|
||||
dev_err(&pdev->dev, "Failed to get regmap handle\n");
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
rc = of_property_read_u32(pdev->dev.of_node, "reg", &sdam->base);
|
||||
if (rc < 0) {
|
||||
dev_err(&pdev->dev, "Failed to get SDAM base, rc=%d\n", rc);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
rc = regmap_read(sdam->regmap, sdam->base + SDAM_SIZE, &val);
|
||||
if (rc < 0) {
|
||||
dev_err(&pdev->dev, "Failed to read SDAM_SIZE rc=%d\n", rc);
|
||||
return -EINVAL;
|
||||
}
|
||||
sdam->size = val * 32;
|
||||
|
||||
sdam->sdam_config.dev = &pdev->dev;
|
||||
sdam->sdam_config.name = "spmi_sdam";
|
||||
sdam->sdam_config.id = pdev->id;
|
||||
sdam->sdam_config.owner = THIS_MODULE,
|
||||
sdam->sdam_config.stride = 1;
|
||||
sdam->sdam_config.word_size = 1;
|
||||
sdam->sdam_config.reg_read = sdam_read;
|
||||
sdam->sdam_config.reg_write = sdam_write;
|
||||
sdam->sdam_config.priv = sdam;
|
||||
|
||||
nvmem = devm_nvmem_register(&pdev->dev, &sdam->sdam_config);
|
||||
if (IS_ERR(nvmem)) {
|
||||
dev_err(&pdev->dev,
|
||||
"Failed to register SDAM nvmem device rc=%ld\n",
|
||||
PTR_ERR(nvmem));
|
||||
return -ENXIO;
|
||||
}
|
||||
dev_dbg(&pdev->dev,
|
||||
"SDAM base=%#x size=%u registered successfully\n",
|
||||
sdam->base, sdam->size);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id sdam_match_table[] = {
|
||||
{ .compatible = "qcom,spmi-sdam" },
|
||||
{},
|
||||
};
|
||||
|
||||
static struct platform_driver sdam_driver = {
|
||||
.driver = {
|
||||
.name = "qcom,spmi-sdam",
|
||||
.of_match_table = sdam_match_table,
|
||||
},
|
||||
.probe = sdam_probe,
|
||||
};
|
||||
|
||||
static int __init sdam_init(void)
|
||||
{
|
||||
return platform_driver_register(&sdam_driver);
|
||||
}
|
||||
subsys_initcall(sdam_init);
|
||||
|
||||
static void __exit sdam_exit(void)
|
||||
{
|
||||
return platform_driver_unregister(&sdam_driver);
|
||||
}
|
||||
module_exit(sdam_exit);
|
||||
|
||||
MODULE_DESCRIPTION("QCOM SPMI SDAM driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in New Issue
Block a user