drm/msm: DT support for 8960/8064 (v3)

Now that we (almost) have enough dependencies in place (MMCC, RPM, etc),
add necessary DT support so that we can use drm/msm on upstream kernel.

v2: update for review comments
v3: rebase on component helper changes

Signed-off-by: Rob Clark <robdclark@gmail.com>
This commit is contained in:
Rob Clark 2013-12-15 16:23:05 -05:00
parent 8f67da335d
commit 41e69778c8
7 changed files with 223 additions and 42 deletions

View File

@ -0,0 +1,52 @@
Qualcomm adreno/snapdragon GPU
Required properties:
- compatible: "qcom,adreno-3xx"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt signal from the gpu.
- clocks: device clocks
See ../clocks/clock-bindings.txt for details.
- clock-names: the following clocks are required:
* "core_clk"
* "iface_clk"
* "mem_iface_clk"
- qcom,chipid: gpu chip-id. Note this may become optional for future
devices if we can reliably read the chipid from hw
- qcom,gpu-pwrlevels: list of operating points
- compatible: "qcom,gpu-pwrlevels"
- for each qcom,gpu-pwrlevel:
- qcom,gpu-freq: requested gpu clock speed
- NOTE: downstream android driver defines additional parameters to
configure memory bandwidth scaling per OPP.
Example:
/ {
...
gpu: qcom,kgsl-3d0@4300000 {
compatible = "qcom,adreno-3xx";
reg = <0x04300000 0x20000>;
reg-names = "kgsl_3d0_reg_memory";
interrupts = <GIC_SPI 80 0>;
interrupt-names = "kgsl_3d0_irq";
clock-names =
"core_clk",
"iface_clk",
"mem_iface_clk";
clocks =
<&mmcc GFX3D_CLK>,
<&mmcc GFX3D_AHB_CLK>,
<&mmcc MMSS_IMEM_AHB_CLK>;
qcom,chipid = <0x03020100>;
qcom,gpu-pwrlevels {
compatible = "qcom,gpu-pwrlevels";
qcom,gpu-pwrlevel@0 {
qcom,gpu-freq = <450000000>;
};
qcom,gpu-pwrlevel@1 {
qcom,gpu-freq = <27000000>;
};
};
};
};

View File

@ -0,0 +1,46 @@
Qualcomm adreno/snapdragon hdmi output
Required properties:
- compatible: one of the following
* "qcom,hdmi-tx-8660"
* "qcom,hdmi-tx-8960"
- reg: Physical base address and length of the controller's registers
- reg-names: "core_physical"
- interrupts: The interrupt signal from the hdmi block.
- clocks: device clocks
See ../clocks/clock-bindings.txt for details.
- qcom,hdmi-tx-ddc-clk-gpio: ddc clk pin
- qcom,hdmi-tx-ddc-data-gpio: ddc data pin
- qcom,hdmi-tx-hpd-gpio: hpd pin
- core-vdda-supply: phandle to supply regulator
- hdmi-mux-supply: phandle to mux regulator
Optional properties:
- qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin
- qcom,hdmi-tx-mux-sel-gpio: hdmi mux select pin
Example:
/ {
...
hdmi: qcom,hdmi-tx-8960@4a00000 {
compatible = "qcom,hdmi-tx-8960";
reg-names = "core_physical";
reg = <0x04a00000 0x1000>;
interrupts = <GIC_SPI 79 0>;
clock-names =
"core_clk",
"master_iface_clk",
"slave_iface_clk";
clocks =
<&mmcc HDMI_APP_CLK>,
<&mmcc HDMI_M_AHB_CLK>,
<&mmcc HDMI_S_AHB_CLK>;
qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>;
qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>;
qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
core-vdda-supply = <&pm8921_hdmi_mvs>;
hdmi-mux-supply = <&ext_3p3v>;
};
};

View File

@ -0,0 +1,48 @@
Qualcomm adreno/snapdragon display controller
Required properties:
- compatible:
* "qcom,mdp" - mdp4
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt signal from the display controller.
- connectors: array of phandles for output device(s)
- clocks: device clocks
See ../clocks/clock-bindings.txt for details.
- clock-names: the following clocks are required:
* "core_clk"
* "iface_clk"
* "lut_clk"
* "src_clk"
* "hdmi_clk"
* "mpd_clk"
Optional properties:
- gpus: phandle for gpu device
Example:
/ {
...
mdp: qcom,mdp@5100000 {
compatible = "qcom,mdp";
reg = <0x05100000 0xf0000>;
interrupts = <GIC_SPI 75 0>;
connectors = <&hdmi>;
gpus = <&gpu>;
clock-names =
"core_clk",
"iface_clk",
"lut_clk",
"src_clk",
"hdmi_clk",
"mdp_clk";
clocks =
<&mmcc MDP_SRC>,
<&mmcc MDP_AHB_CLK>,
<&mmcc MDP_LUT_CLK>,
<&mmcc TV_SRC>,
<&mmcc HDMI_TV_CLK>,
<&mmcc MDP_TV_CLK>;
};
};

View File

@ -680,6 +680,8 @@ static int a3xx_remove(struct platform_device *pdev)
}
static const struct of_device_id dt_match[] = {
{ .compatible = "qcom,adreno-3xx" },
/* for backwards compat w/ downstream kgsl DT files: */
{ .compatible = "qcom,kgsl-3d0" },
{}
};

View File

@ -123,7 +123,8 @@ struct hdmi *hdmi_init(struct drm_device *dev, struct drm_encoder *encoder)
for (i = 0; i < config->hpd_reg_cnt; i++) {
struct regulator *reg;
reg = devm_regulator_get(&pdev->dev, config->hpd_reg_names[i]);
reg = devm_regulator_get_exclusive(&pdev->dev,
config->hpd_reg_names[i]);
if (IS_ERR(reg)) {
ret = PTR_ERR(reg);
dev_err(dev->dev, "failed to get hpd regulator: %s (%d)\n",
@ -138,7 +139,8 @@ struct hdmi *hdmi_init(struct drm_device *dev, struct drm_encoder *encoder)
for (i = 0; i < config->pwr_reg_cnt; i++) {
struct regulator *reg;
reg = devm_regulator_get(&pdev->dev, config->pwr_reg_names[i]);
reg = devm_regulator_get_exclusive(&pdev->dev,
config->pwr_reg_names[i]);
if (IS_ERR(reg)) {
ret = PTR_ERR(reg);
dev_err(dev->dev, "failed to get pwr regulator: %s (%d)\n",
@ -266,37 +268,55 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data)
{
int gpio = of_get_named_gpio(of_node, name, 0);
if (gpio < 0) {
dev_err(dev, "failed to get gpio: %s (%d)\n",
name, gpio);
gpio = -1;
char name2[32];
snprintf(name2, sizeof(name2), "%s-gpio", name);
gpio = of_get_named_gpio(of_node, name2, 0);
if (gpio < 0) {
dev_err(dev, "failed to get gpio: %s (%d)\n",
name, gpio);
gpio = -1;
}
}
return gpio;
}
/* TODO actually use DT.. */
static const char *hpd_reg_names[] = {"hpd-gdsc", "hpd-5v"};
static const char *pwr_reg_names[] = {"core-vdda", "core-vcc"};
static const char *hpd_clk_names[] = {"iface_clk", "core_clk", "mdp_core_clk"};
static unsigned long hpd_clk_freq[] = {0, 19200000, 0};
static const char *pwr_clk_names[] = {"extp_clk", "alt_iface_clk"};
if (of_device_is_compatible(of_node, "qcom,hdmi-tx-8074")) {
static const char *hpd_reg_names[] = {"hpd-gdsc", "hpd-5v"};
static const char *pwr_reg_names[] = {"core-vdda", "core-vcc"};
static const char *hpd_clk_names[] = {"iface_clk", "core_clk", "mdp_core_clk"};
static unsigned long hpd_clk_freq[] = {0, 19200000, 0};
static const char *pwr_clk_names[] = {"extp_clk", "alt_iface_clk"};
config.phy_init = hdmi_phy_8x74_init;
config.hpd_reg_names = hpd_reg_names;
config.hpd_reg_cnt = ARRAY_SIZE(hpd_reg_names);
config.pwr_reg_names = pwr_reg_names;
config.pwr_reg_cnt = ARRAY_SIZE(pwr_reg_names);
config.hpd_clk_names = hpd_clk_names;
config.hpd_freq = hpd_clk_freq;
config.hpd_clk_cnt = ARRAY_SIZE(hpd_clk_names);
config.pwr_clk_names = pwr_clk_names;
config.pwr_clk_cnt = ARRAY_SIZE(pwr_clk_names);
config.shared_irq = true;
} else if (of_device_is_compatible(of_node, "qcom,hdmi-tx-8960")) {
static const char *hpd_clk_names[] = {"core_clk", "master_iface_clk", "slave_iface_clk"};
static const char *hpd_reg_names[] = {"core-vdda", "hdmi-mux"};
config.phy_init = hdmi_phy_8960_init;
config.hpd_reg_names = hpd_reg_names;
config.hpd_reg_cnt = ARRAY_SIZE(hpd_reg_names);
config.hpd_clk_names = hpd_clk_names;
config.hpd_clk_cnt = ARRAY_SIZE(hpd_clk_names);
} else if (of_device_is_compatible(of_node, "qcom,hdmi-tx-8660")) {
config.phy_init = hdmi_phy_8x60_init;
} else {
dev_err(dev, "unknown phy: %s\n", of_node->name);
}
config.phy_init = hdmi_phy_8x74_init;
config.mmio_name = "core_physical";
config.hpd_reg_names = hpd_reg_names;
config.hpd_reg_cnt = ARRAY_SIZE(hpd_reg_names);
config.pwr_reg_names = pwr_reg_names;
config.pwr_reg_cnt = ARRAY_SIZE(pwr_reg_names);
config.hpd_clk_names = hpd_clk_names;
config.hpd_freq = hpd_clk_freq;
config.hpd_clk_cnt = ARRAY_SIZE(hpd_clk_names);
config.pwr_clk_names = pwr_clk_names;
config.pwr_clk_cnt = ARRAY_SIZE(pwr_clk_names);
config.ddc_clk_gpio = get_gpio("qcom,hdmi-tx-ddc-clk");
config.ddc_data_gpio = get_gpio("qcom,hdmi-tx-ddc-data");
config.hpd_gpio = get_gpio("qcom,hdmi-tx-hpd");
config.mux_en_gpio = get_gpio("qcom,hdmi-tx-mux-en");
config.mux_sel_gpio = get_gpio("qcom,hdmi-tx-mux-sel");
config.shared_irq = true;
#else
static const char *hpd_clk_names[] = {
@ -373,7 +393,9 @@ static int hdmi_dev_remove(struct platform_device *pdev)
}
static const struct of_device_id dt_match[] = {
{ .compatible = "qcom,hdmi-tx" },
{ .compatible = "qcom,hdmi-tx-8074" },
{ .compatible = "qcom,hdmi-tx-8960" },
{ .compatible = "qcom,hdmi-tx-8660" },
{}
};

View File

@ -294,15 +294,17 @@ struct msm_kms *mdp4_kms_init(struct drm_device *dev)
goto fail;
}
mdp4_kms->dsi_pll_vdda = devm_regulator_get(&pdev->dev, "dsi_pll_vdda");
mdp4_kms->dsi_pll_vdda =
devm_regulator_get_optional(&pdev->dev, "dsi_pll_vdda");
if (IS_ERR(mdp4_kms->dsi_pll_vdda))
mdp4_kms->dsi_pll_vdda = NULL;
mdp4_kms->dsi_pll_vddio = devm_regulator_get(&pdev->dev, "dsi_pll_vddio");
mdp4_kms->dsi_pll_vddio =
devm_regulator_get_optional(&pdev->dev, "dsi_pll_vddio");
if (IS_ERR(mdp4_kms->dsi_pll_vddio))
mdp4_kms->dsi_pll_vddio = NULL;
mdp4_kms->vdd = devm_regulator_get(&pdev->dev, "vdd");
mdp4_kms->vdd = devm_regulator_get_exclusive(&pdev->dev, "vdd");
if (IS_ERR(mdp4_kms->vdd))
mdp4_kms->vdd = NULL;
@ -406,6 +408,8 @@ static struct mdp4_platform_config *mdp4_get_config(struct platform_device *dev)
static struct mdp4_platform_config config = {};
#ifdef CONFIG_OF
/* TODO */
config.max_clk = 266667000;
config.iommu = iommu_domain_alloc(&platform_bus_type);
#else
if (cpu_is_apq8064())
config.max_clk = 266667000;

View File

@ -905,6 +905,25 @@ static int compare_of(struct device *dev, void *data)
{
return dev->of_node == data;
}
static int add_components(struct device *dev, struct component_match **matchptr,
const char *name)
{
struct device_node *np = dev->of_node;
unsigned i;
for (i = 0; ; i++) {
struct device_node *node;
node = of_parse_phandle(np, name, i);
if (!node)
break;
component_match_add(dev, matchptr, compare_of, node);
}
return 0;
}
#else
static int compare_dev(struct device *dev, void *data)
{
@ -935,21 +954,8 @@ static int msm_pdev_probe(struct platform_device *pdev)
{
struct component_match *match = NULL;
#ifdef CONFIG_OF
/* NOTE: the CONFIG_OF case duplicates the same code as exynos or imx
* (or probably any other).. so probably some room for some helpers
*/
struct device_node *np = pdev->dev.of_node;
unsigned i;
for (i = 0; ; i++) {
struct device_node *node;
node = of_parse_phandle(np, "connectors", i);
if (!node)
break;
component_match_add(&pdev->dev, &match, compare_of, node);
}
add_components(&pdev->dev, &match, "connectors");
add_components(&pdev->dev, &match, "gpus");
#else
/* For non-DT case, it kinda sucks. We don't actually have a way
* to know whether or not we are waiting for certain devices (or if
@ -995,7 +1001,8 @@ static const struct platform_device_id msm_id[] = {
};
static const struct of_device_id dt_match[] = {
{ .compatible = "qcom,mdss_mdp" },
{ .compatible = "qcom,mdp" }, /* mdp4 */
{ .compatible = "qcom,mdss_mdp" }, /* mdp5 */
{}
};
MODULE_DEVICE_TABLE(of, dt_match);