forked from luck/tmp_suning_uos_patched
usb: common: add USB GPIO based connection detection driver
Due to the requirement of usb-connector.txt binding, the old way using extcon to support USB Dual-Role switch is now deprecated when use Type-B connector. This patch introduces a USB GPIO based connection detection driver, used to support Type-B connector which typically uses an input GPIO to detect USB ID pin, and try to replace the function provided by the extcon-usb-gpio driver Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Nagarjuna Kristam <nkristam@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/1567070558-29417-11-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Chunfeng Yun
Greg Kroah-Hartman
parent
12b591bccc
commit
4602f3bff2
|
|
@ -36,3 +36,16 @@ config USB_ULPI_BUS
|
|||
To compile this driver as a module, choose M here: the module will
|
||||
be called ulpi.
|
||||
|
||||
config USB_CONN_GPIO
|
||||
tristate "USB GPIO Based Connection Detection Driver"
|
||||
depends on GPIOLIB
|
||||
select USB_ROLE_SWITCH
|
||||
help
|
||||
The driver supports USB role switch between host and device via GPIO
|
||||
based USB cable detection, used typically if an input GPIO is used
|
||||
to detect USB ID pin, and another input GPIO may be also used to detect
|
||||
Vbus pin at the same time, it also can be used to enable/disable
|
||||
device if an input GPIO is only used to detect Vbus pin.
|
||||
|
||||
To compile the driver as a module, choose M here: the module will
|
||||
be called usb-conn-gpio.ko
|
||||
|
|
|
|||
|
|
@ -8,5 +8,6 @@ usb-common-y += common.o
|
|||
usb-common-$(CONFIG_TRACING) += debug.o
|
||||
usb-common-$(CONFIG_USB_LED_TRIG) += led.o
|
||||
|
||||
obj-$(CONFIG_USB_CONN_GPIO) += usb-conn-gpio.o
|
||||
obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o
|
||||
obj-$(CONFIG_USB_ULPI_BUS) += ulpi.o
|
||||
|
|
|
|||
284
drivers/usb/common/usb-conn-gpio.c
Normal file
284
drivers/usb/common/usb-conn-gpio.c
Normal file
|
|
@ -0,0 +1,284 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* USB GPIO Based Connection Detection Driver
|
||||
*
|
||||
* Copyright (C) 2019 MediaTek Inc.
|
||||
*
|
||||
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
|
||||
*
|
||||
* Some code borrowed from drivers/extcon/extcon-usb-gpio.c
|
||||
*/
|
||||
|
||||
#include <linux/device.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/pinctrl/consumer.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regulator/consumer.h>
|
||||
#include <linux/usb/role.h>
|
||||
|
||||
#define USB_GPIO_DEB_MS 20 /* ms */
|
||||
#define USB_GPIO_DEB_US ((USB_GPIO_DEB_MS) * 1000) /* us */
|
||||
|
||||
#define USB_CONN_IRQF \
|
||||
(IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT)
|
||||
|
||||
struct usb_conn_info {
|
||||
struct device *dev;
|
||||
struct usb_role_switch *role_sw;
|
||||
enum usb_role last_role;
|
||||
struct regulator *vbus;
|
||||
struct delayed_work dw_det;
|
||||
unsigned long debounce_jiffies;
|
||||
|
||||
struct gpio_desc *id_gpiod;
|
||||
struct gpio_desc *vbus_gpiod;
|
||||
int id_irq;
|
||||
int vbus_irq;
|
||||
};
|
||||
|
||||
/**
|
||||
* "DEVICE" = VBUS and "HOST" = !ID, so we have:
|
||||
* Both "DEVICE" and "HOST" can't be set as active at the same time
|
||||
* so if "HOST" is active (i.e. ID is 0) we keep "DEVICE" inactive
|
||||
* even if VBUS is on.
|
||||
*
|
||||
* Role | ID | VBUS
|
||||
* ------------------------------------
|
||||
* [1] DEVICE | H | H
|
||||
* [2] NONE | H | L
|
||||
* [3] HOST | L | H
|
||||
* [4] HOST | L | L
|
||||
*
|
||||
* In case we have only one of these signals:
|
||||
* - VBUS only - we want to distinguish between [1] and [2], so ID is always 1
|
||||
* - ID only - we want to distinguish between [1] and [4], so VBUS = ID
|
||||
*/
|
||||
static void usb_conn_detect_cable(struct work_struct *work)
|
||||
{
|
||||
struct usb_conn_info *info;
|
||||
enum usb_role role;
|
||||
int id, vbus, ret;
|
||||
|
||||
info = container_of(to_delayed_work(work),
|
||||
struct usb_conn_info, dw_det);
|
||||
|
||||
/* check ID and VBUS */
|
||||
id = info->id_gpiod ?
|
||||
gpiod_get_value_cansleep(info->id_gpiod) : 1;
|
||||
vbus = info->vbus_gpiod ?
|
||||
gpiod_get_value_cansleep(info->vbus_gpiod) : id;
|
||||
|
||||
if (!id)
|
||||
role = USB_ROLE_HOST;
|
||||
else if (vbus)
|
||||
role = USB_ROLE_DEVICE;
|
||||
else
|
||||
role = USB_ROLE_NONE;
|
||||
|
||||
dev_dbg(info->dev, "role %d/%d, gpios: id %d, vbus %d\n",
|
||||
info->last_role, role, id, vbus);
|
||||
|
||||
if (info->last_role == role) {
|
||||
dev_warn(info->dev, "repeated role: %d\n", role);
|
||||
return;
|
||||
}
|
||||
|
||||
if (info->last_role == USB_ROLE_HOST)
|
||||
regulator_disable(info->vbus);
|
||||
|
||||
ret = usb_role_switch_set_role(info->role_sw, role);
|
||||
if (ret)
|
||||
dev_err(info->dev, "failed to set role: %d\n", ret);
|
||||
|
||||
if (role == USB_ROLE_HOST) {
|
||||
ret = regulator_enable(info->vbus);
|
||||
if (ret)
|
||||
dev_err(info->dev, "enable vbus regulator failed\n");
|
||||
}
|
||||
|
||||
info->last_role = role;
|
||||
|
||||
dev_dbg(info->dev, "vbus regulator is %s\n",
|
||||
regulator_is_enabled(info->vbus) ? "enabled" : "disabled");
|
||||
}
|
||||
|
||||
static void usb_conn_queue_dwork(struct usb_conn_info *info,
|
||||
unsigned long delay)
|
||||
{
|
||||
queue_delayed_work(system_power_efficient_wq, &info->dw_det, delay);
|
||||
}
|
||||
|
||||
static irqreturn_t usb_conn_isr(int irq, void *dev_id)
|
||||
{
|
||||
struct usb_conn_info *info = dev_id;
|
||||
|
||||
usb_conn_queue_dwork(info, info->debounce_jiffies);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int usb_conn_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct usb_conn_info *info;
|
||||
int ret = 0;
|
||||
|
||||
info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
|
||||
if (!info)
|
||||
return -ENOMEM;
|
||||
|
||||
info->dev = dev;
|
||||
info->id_gpiod = devm_gpiod_get_optional(dev, "id", GPIOD_IN);
|
||||
if (IS_ERR(info->id_gpiod))
|
||||
return PTR_ERR(info->id_gpiod);
|
||||
|
||||
info->vbus_gpiod = devm_gpiod_get_optional(dev, "vbus", GPIOD_IN);
|
||||
if (IS_ERR(info->vbus_gpiod))
|
||||
return PTR_ERR(info->vbus_gpiod);
|
||||
|
||||
if (!info->id_gpiod && !info->vbus_gpiod) {
|
||||
dev_err(dev, "failed to get gpios\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
if (info->id_gpiod)
|
||||
ret = gpiod_set_debounce(info->id_gpiod, USB_GPIO_DEB_US);
|
||||
if (!ret && info->vbus_gpiod)
|
||||
ret = gpiod_set_debounce(info->vbus_gpiod, USB_GPIO_DEB_US);
|
||||
if (ret < 0)
|
||||
info->debounce_jiffies = msecs_to_jiffies(USB_GPIO_DEB_MS);
|
||||
|
||||
INIT_DELAYED_WORK(&info->dw_det, usb_conn_detect_cable);
|
||||
|
||||
info->vbus = devm_regulator_get(dev, "vbus");
|
||||
if (IS_ERR(info->vbus)) {
|
||||
dev_err(dev, "failed to get vbus\n");
|
||||
return PTR_ERR(info->vbus);
|
||||
}
|
||||
|
||||
info->role_sw = usb_role_switch_get(dev);
|
||||
if (IS_ERR(info->role_sw)) {
|
||||
if (PTR_ERR(info->role_sw) != -EPROBE_DEFER)
|
||||
dev_err(dev, "failed to get role switch\n");
|
||||
|
||||
return PTR_ERR(info->role_sw);
|
||||
}
|
||||
|
||||
if (info->id_gpiod) {
|
||||
info->id_irq = gpiod_to_irq(info->id_gpiod);
|
||||
if (info->id_irq < 0) {
|
||||
dev_err(dev, "failed to get ID IRQ\n");
|
||||
ret = info->id_irq;
|
||||
goto put_role_sw;
|
||||
}
|
||||
|
||||
ret = devm_request_threaded_irq(dev, info->id_irq, NULL,
|
||||
usb_conn_isr, USB_CONN_IRQF,
|
||||
pdev->name, info);
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "failed to request ID IRQ\n");
|
||||
goto put_role_sw;
|
||||
}
|
||||
}
|
||||
|
||||
if (info->vbus_gpiod) {
|
||||
info->vbus_irq = gpiod_to_irq(info->vbus_gpiod);
|
||||
if (info->vbus_irq < 0) {
|
||||
dev_err(dev, "failed to get VBUS IRQ\n");
|
||||
ret = info->vbus_irq;
|
||||
goto put_role_sw;
|
||||
}
|
||||
|
||||
ret = devm_request_threaded_irq(dev, info->vbus_irq, NULL,
|
||||
usb_conn_isr, USB_CONN_IRQF,
|
||||
pdev->name, info);
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "failed to request VBUS IRQ\n");
|
||||
goto put_role_sw;
|
||||
}
|
||||
}
|
||||
|
||||
platform_set_drvdata(pdev, info);
|
||||
|
||||
/* Perform initial detection */
|
||||
usb_conn_queue_dwork(info, 0);
|
||||
|
||||
return 0;
|
||||
|
||||
put_role_sw:
|
||||
usb_role_switch_put(info->role_sw);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int usb_conn_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct usb_conn_info *info = platform_get_drvdata(pdev);
|
||||
|
||||
cancel_delayed_work_sync(&info->dw_det);
|
||||
|
||||
if (info->last_role == USB_ROLE_HOST)
|
||||
regulator_disable(info->vbus);
|
||||
|
||||
usb_role_switch_put(info->role_sw);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __maybe_unused usb_conn_suspend(struct device *dev)
|
||||
{
|
||||
struct usb_conn_info *info = dev_get_drvdata(dev);
|
||||
|
||||
if (info->id_gpiod)
|
||||
disable_irq(info->id_irq);
|
||||
if (info->vbus_gpiod)
|
||||
disable_irq(info->vbus_irq);
|
||||
|
||||
pinctrl_pm_select_sleep_state(dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __maybe_unused usb_conn_resume(struct device *dev)
|
||||
{
|
||||
struct usb_conn_info *info = dev_get_drvdata(dev);
|
||||
|
||||
pinctrl_pm_select_default_state(dev);
|
||||
|
||||
if (info->id_gpiod)
|
||||
enable_irq(info->id_irq);
|
||||
if (info->vbus_gpiod)
|
||||
enable_irq(info->vbus_irq);
|
||||
|
||||
usb_conn_queue_dwork(info, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static SIMPLE_DEV_PM_OPS(usb_conn_pm_ops,
|
||||
usb_conn_suspend, usb_conn_resume);
|
||||
|
||||
static const struct of_device_id usb_conn_dt_match[] = {
|
||||
{ .compatible = "gpio-usb-b-connector", },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, usb_conn_dt_match);
|
||||
|
||||
static struct platform_driver usb_conn_driver = {
|
||||
.probe = usb_conn_probe,
|
||||
.remove = usb_conn_remove,
|
||||
.driver = {
|
||||
.name = "usb-conn-gpio",
|
||||
.pm = &usb_conn_pm_ops,
|
||||
.of_match_table = usb_conn_dt_match,
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(usb_conn_driver);
|
||||
|
||||
MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>");
|
||||
MODULE_DESCRIPTION("USB GPIO based connection detection driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in New Issue
Block a user