AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

Input: migor-ts - convert to a threaded IRQ

Browse Source 
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This commit is contained in:
Dmitry Torokhov 2011-11-30 23:44:30 -08:00
parent e23ed600ba
commit 468792eb1e
1 changed files with 24 additions and 41 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

65
drivers/input/touchscreen/migor_ts.c
View File

@ -36,7 +36,6 @@
struct migor_ts_priv {
struct i2c_client *client;
struct input_dev *input;
struct delayed_work work;
int irq;
};
@ -44,15 +43,24 @@ static const u_int8_t migor_ts_ena_seq[17] = { 0x33, 0x22, 0x11,
0x01, 0x06, 0x07, };
static const u_int8_t migor_ts_dis_seq[17] = { };
static void migor_ts_poscheck(struct work_struct *work)
static irqreturn_t migor_ts_isr(int irq, void *dev_id)
{
struct migor_ts_priv *priv = container_of(work,
struct migor_ts_priv,
work.work);
struct migor_ts_priv *priv = dev_id;
unsigned short xpos, ypos;
unsigned char event;
u_int8_t buf[16];
/*
* The touch screen controller chip is hooked up to the CPU
* using I2C and a single interrupt line. The interrupt line
* is pulled low whenever someone taps the screen. To deassert
* the interrupt line we need to acknowledge the interrupt by
* communicating with the controller over the slow i2c bus.
*
* Since I2C bus controller may sleep we are using threaded
* IRQ here.
*/
memset(buf, 0, sizeof(buf));
/* Set Index 0 */
@ -72,41 +80,25 @@ static void migor_ts_poscheck(struct work_struct *work)
xpos = ((buf[11] & 0x03) << 8 | buf[10]);
event = buf[12];
if (event == EVENT_PENDOWN || event == EVENT_REPEAT) {
switch (event) {
case EVENT_PENDOWN:
case EVENT_REPEAT:
input_report_key(priv->input, BTN_TOUCH, 1);
input_report_abs(priv->input, ABS_X, ypos); /*X-Y swap*/
input_report_abs(priv->input, ABS_Y, xpos);
input_sync(priv->input);
} else if (event == EVENT_PENUP) {
break;
case EVENT_PENUP:
input_report_key(priv->input, BTN_TOUCH, 0);
input_sync(priv->input);
break;
}
out:
enable_irq(priv->irq);
}
static irqreturn_t migor_ts_isr(int irq, void *dev_id)
{
struct migor_ts_priv *priv = dev_id;
/* the touch screen controller chip is hooked up to the cpu
* using i2c and a single interrupt line. the interrupt line
* is pulled low whenever someone taps the screen. to deassert
* the interrupt line we need to acknowledge the interrupt by
* communicating with the controller over the slow i2c bus.
*
* we can't acknowledge from interrupt context since the i2c
* bus controller may sleep, so we just disable the interrupt
* here and handle the acknowledge using delayed work.
*/
disable_irq_nosync(irq);
schedule_delayed_work(&priv->work, HZ / 20);
return IRQ_HANDLED;
}
static int migor_ts_open(struct input_dev *dev)
{
struct migor_ts_priv *priv = input_get_drvdata(dev);
@ -131,15 +123,6 @@ static void migor_ts_close(struct input_dev *dev)
disable_irq(priv->irq);
/* cancel pending work and wait for migor_ts_poscheck() to finish */
if (cancel_delayed_work_sync(&priv->work)) {
/*
* if migor_ts_poscheck was canceled we need to enable IRQ
* here to balance disable done in migor_ts_isr.
*/
enable_irq(priv->irq);
}
/* disable controller */
i2c_master_send(client, migor_ts_dis_seq, sizeof(migor_ts_dis_seq));
@ -186,15 +169,15 @@ static int migor_ts_probe(struct i2c_client *client,
priv->client = client;
priv->input = input;
INIT_DELAYED_WORK(&priv->work, migor_ts_poscheck);
priv->irq = client->irq;
error = input_register_device(input);
if (error)
goto err1;
error = request_irq(priv->irq, migor_ts_isr, IRQF_TRIGGER_LOW,
client->name, priv);
error = request_threaded_irq(priv->irq, NULL, migor_ts_isr,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
client->name, priv);
if (error) {
dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
goto err2;