AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

net: stmmac: the XPCS obscures a potential "PHY not found" error

Browse Source 
[ Upstream commit 4751d2aa321f2828d8c5d2f7ce4ed18a01e47f46 ]

stmmac_mdio_register() has logic to search for PHYs on the MDIO bus and
assign them IRQ lines, as well as to set priv->plat->phy_addr.

If no PHY is found, the "found" variable remains set to 0 and the
function errors out.

After the introduction of commit f213bbe8a9 ("net: stmmac: Integrate
it with DesignWare XPCS"), the "found" variable was immediately reused
for searching for a PCS on the same MDIO bus.

This can result in 2 types of potential problems (none of them seems to
be seen on the only Intel system that sets has_xpcs = true, otherwise it
would have been reported):

1. If a PCS is found but a PHY is not, then the code happily exits with
   no error. One might say "yes, but this is not possible, because
   of_mdiobus_register will probe a PHY for all MDIO addresses,
   including for the XPCS, so if an XPCS exists, then a PHY certainly
   exists too". Well, that is not true, see intel_mgbe_common_data():

	/* Ensure mdio bus scan skips intel serdes and pcs-xpcs */
	plat->mdio_bus_data->phy_mask = 1 << INTEL_MGBE_ADHOC_ADDR;
	plat->mdio_bus_data->phy_mask |= 1 << INTEL_MGBE_XPCS_ADDR;

2. A PHY is found but an MDIO device with the XPCS PHY ID isn't, and in
   that case, the error message will be "No PHY found". Confusing.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210527155959.3270478-1-olteanv@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
Vladimir Oltean 2021-05-27 18:59:59 +03:00 committed by Greg Kroah-Hartman
parent a7d608bb78
commit 4f6a0f31c6
1 changed files with 15 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
View File

@ -441,6 +441,12 @@ int stmmac_mdio_register(struct net_device *ndev)
found = 1;
}
if (!found && !mdio_node) {
dev_warn(dev, "No PHY found\n");
err = -ENODEV;
goto no_phy_found;
}
/* Try to probe the XPCS by scanning all addresses. */
if (priv->hw->xpcs) {
struct mdio_xpcs_args *xpcs = &priv->hw->xpcs_args;
@ -449,6 +455,7 @@ int stmmac_mdio_register(struct net_device *ndev)
xpcs->bus = new_bus;
found = 0;
for (addr = 0; addr < max_addr; addr++) {
xpcs->addr = addr;
@ -458,13 +465,12 @@ int stmmac_mdio_register(struct net_device *ndev)
break;
}
}
}
if (!found && !mdio_node) {
dev_warn(dev, "No PHY found\n");
mdiobus_unregister(new_bus);
mdiobus_free(new_bus);
return -ENODEV;
dev_warn(dev, "No XPCS found\n");
err = -ENODEV;
goto no_xpcs_found;
}
}
bus_register_done:
@ -472,6 +478,9 @@ int stmmac_mdio_register(struct net_device *ndev)
return 0;
no_xpcs_found:
no_phy_found:
mdiobus_unregister(new_bus);
bus_register_fail:
mdiobus_free(new_bus);
return err;