forked from luck/tmp_suning_uos_patched
pinctrl: da9062: add driver support
The DA9062 is a mfd pmic device which supports 5 GPIOs. The GPIOs can be used as input, output or have a special use-case. The patch adds the support for the normal input/output use-case. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20200108104746.1765-4-m.felsch@pengutronix.de Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
parent
c93214689f
commit
56cc3af4e8
|
@ -4921,6 +4921,7 @@ F: drivers/leds/leds-da90??.c
|
|||
F: drivers/mfd/da903x.c
|
||||
F: drivers/mfd/da90??-*.c
|
||||
F: drivers/mfd/da91??-*.c
|
||||
F: drivers/pinctrl/pinctrl-da90??.c
|
||||
F: drivers/power/supply/da9052-battery.c
|
||||
F: drivers/power/supply/da91??-*.c
|
||||
F: drivers/regulator/da903x.c
|
||||
|
|
|
@ -126,6 +126,18 @@ config PINCTRL_DA850_PUPD
|
|||
Driver for TI DA850/OMAP-L138/AM18XX pinconf. Used to control
|
||||
pullup/pulldown pin groups.
|
||||
|
||||
config PINCTRL_DA9062
|
||||
tristate "Dialog Semiconductor DA9062 PMIC pinctrl and GPIO Support"
|
||||
depends on MFD_DA9062
|
||||
select GPIOLIB
|
||||
help
|
||||
The Dialog DA9062 PMIC provides multiple GPIOs that can be muxed for
|
||||
different functions. This driver bundles a pinctrl driver to select the
|
||||
function muxing and a GPIO driver to handle the GPIO when the GPIO
|
||||
function is selected.
|
||||
|
||||
Say yes to enable pinctrl and GPIO support for the DA9062 PMIC.
|
||||
|
||||
config PINCTRL_DIGICOLOR
|
||||
bool
|
||||
depends on OF && (ARCH_DIGICOLOR || COMPILE_TEST)
|
||||
|
|
|
@ -16,6 +16,7 @@ obj-$(CONFIG_PINCTRL_AT91PIO4) += pinctrl-at91-pio4.o
|
|||
obj-$(CONFIG_PINCTRL_AMD) += pinctrl-amd.o
|
||||
obj-$(CONFIG_PINCTRL_BM1880) += pinctrl-bm1880.o
|
||||
obj-$(CONFIG_PINCTRL_DA850_PUPD) += pinctrl-da850-pupd.o
|
||||
obj-$(CONFIG_PINCTRL_DA9062) += pinctrl-da9062.o
|
||||
obj-$(CONFIG_PINCTRL_DIGICOLOR) += pinctrl-digicolor.o
|
||||
obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o
|
||||
obj-$(CONFIG_PINCTRL_GEMINI) += pinctrl-gemini.o
|
||||
|
|
300
drivers/pinctrl/pinctrl-da9062.c
Normal file
300
drivers/pinctrl/pinctrl-da9062.c
Normal file
|
@ -0,0 +1,300 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Dialog DA9062 pinctrl and GPIO driver.
|
||||
* Based on DA9055 GPIO driver.
|
||||
*
|
||||
* TODO:
|
||||
* - add pinmux and pinctrl support (gpio alternate mode)
|
||||
*
|
||||
* Documents:
|
||||
* [1] https://www.dialog-semiconductor.com/sites/default/files/da9062_datasheet_3v6.pdf
|
||||
*
|
||||
* Copyright (C) 2019 Pengutronix, Marco Felsch <kernel@pengutronix.de>
|
||||
*/
|
||||
#include <linux/bits.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regmap.h>
|
||||
|
||||
#include <linux/gpio/driver.h>
|
||||
|
||||
#include <linux/mfd/da9062/core.h>
|
||||
#include <linux/mfd/da9062/registers.h>
|
||||
|
||||
/*
|
||||
* We need this get the gpio_desc from a <gpio_chip,offset> tuple to decide if
|
||||
* the gpio is active low without a vendor specific dt-binding.
|
||||
*/
|
||||
#include <../gpio/gpiolib.h>
|
||||
|
||||
#define DA9062_TYPE(offset) (4 * (offset % 2))
|
||||
#define DA9062_PIN_SHIFT(offset) (4 * (offset % 2))
|
||||
#define DA9062_PIN_ALTERNATE 0x00 /* gpio alternate mode */
|
||||
#define DA9062_PIN_GPI 0x01 /* gpio in */
|
||||
#define DA9062_PIN_GPO_OD 0x02 /* gpio out open-drain */
|
||||
#define DA9062_PIN_GPO_PP 0x03 /* gpio out push-pull */
|
||||
#define DA9062_GPIO_NUM 5
|
||||
|
||||
struct da9062_pctl {
|
||||
struct da9062 *da9062;
|
||||
struct gpio_chip gc;
|
||||
unsigned int pin_config[DA9062_GPIO_NUM];
|
||||
};
|
||||
|
||||
static int da9062_pctl_get_pin_mode(struct da9062_pctl *pctl,
|
||||
unsigned int offset)
|
||||
{
|
||||
struct regmap *regmap = pctl->da9062->regmap;
|
||||
int ret, val;
|
||||
|
||||
ret = regmap_read(regmap, DA9062AA_GPIO_0_1 + (offset >> 1), &val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
val >>= DA9062_PIN_SHIFT(offset);
|
||||
val &= DA9062AA_GPIO0_PIN_MASK;
|
||||
|
||||
return val;
|
||||
}
|
||||
|
||||
static int da9062_pctl_set_pin_mode(struct da9062_pctl *pctl,
|
||||
unsigned int offset, unsigned int mode_req)
|
||||
{
|
||||
struct regmap *regmap = pctl->da9062->regmap;
|
||||
unsigned int mode = mode_req;
|
||||
unsigned int mask;
|
||||
int ret;
|
||||
|
||||
mode &= DA9062AA_GPIO0_PIN_MASK;
|
||||
mode <<= DA9062_PIN_SHIFT(offset);
|
||||
mask = DA9062AA_GPIO0_PIN_MASK << DA9062_PIN_SHIFT(offset);
|
||||
|
||||
ret = regmap_update_bits(regmap, DA9062AA_GPIO_0_1 + (offset >> 1),
|
||||
mask, mode);
|
||||
if (!ret)
|
||||
pctl->pin_config[offset] = mode_req;
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int da9062_gpio_get(struct gpio_chip *gc, unsigned int offset)
|
||||
{
|
||||
struct da9062_pctl *pctl = gpiochip_get_data(gc);
|
||||
struct regmap *regmap = pctl->da9062->regmap;
|
||||
int gpio_mode, val;
|
||||
int ret;
|
||||
|
||||
gpio_mode = da9062_pctl_get_pin_mode(pctl, offset);
|
||||
if (gpio_mode < 0)
|
||||
return gpio_mode;
|
||||
|
||||
switch (gpio_mode) {
|
||||
case DA9062_PIN_ALTERNATE:
|
||||
return -ENOTSUPP;
|
||||
case DA9062_PIN_GPI:
|
||||
ret = regmap_read(regmap, DA9062AA_STATUS_B, &val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
break;
|
||||
case DA9062_PIN_GPO_OD:
|
||||
case DA9062_PIN_GPO_PP:
|
||||
ret = regmap_read(regmap, DA9062AA_GPIO_MODE0_4, &val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
}
|
||||
|
||||
return !!(val & BIT(offset));
|
||||
}
|
||||
|
||||
static void da9062_gpio_set(struct gpio_chip *gc, unsigned int offset,
|
||||
int value)
|
||||
{
|
||||
struct da9062_pctl *pctl = gpiochip_get_data(gc);
|
||||
struct regmap *regmap = pctl->da9062->regmap;
|
||||
|
||||
regmap_update_bits(regmap, DA9062AA_GPIO_MODE0_4, BIT(offset),
|
||||
value << offset);
|
||||
}
|
||||
|
||||
static int da9062_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
|
||||
{
|
||||
struct da9062_pctl *pctl = gpiochip_get_data(gc);
|
||||
int gpio_mode;
|
||||
|
||||
gpio_mode = da9062_pctl_get_pin_mode(pctl, offset);
|
||||
if (gpio_mode < 0)
|
||||
return gpio_mode;
|
||||
|
||||
switch (gpio_mode) {
|
||||
case DA9062_PIN_ALTERNATE:
|
||||
return -ENOTSUPP;
|
||||
case DA9062_PIN_GPI:
|
||||
return GPIO_LINE_DIRECTION_IN;
|
||||
case DA9062_PIN_GPO_OD:
|
||||
case DA9062_PIN_GPO_PP:
|
||||
return GPIO_LINE_DIRECTION_OUT;
|
||||
}
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int da9062_gpio_direction_input(struct gpio_chip *gc,
|
||||
unsigned int offset)
|
||||
{
|
||||
struct da9062_pctl *pctl = gpiochip_get_data(gc);
|
||||
struct regmap *regmap = pctl->da9062->regmap;
|
||||
struct gpio_desc *desc = gpiochip_get_desc(gc, offset);
|
||||
unsigned int gpi_type;
|
||||
int ret;
|
||||
|
||||
ret = da9062_pctl_set_pin_mode(pctl, offset, DA9062_PIN_GPI);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/*
|
||||
* If the gpio is active low we should set it in hw too. No worries
|
||||
* about gpio_get() because we read and return the gpio-level. So the
|
||||
* gpiolib active_low handling is still correct.
|
||||
*
|
||||
* 0 - active low, 1 - active high
|
||||
*/
|
||||
gpi_type = !gpiod_is_active_low(desc);
|
||||
|
||||
return regmap_update_bits(regmap, DA9062AA_GPIO_0_1 + (offset >> 1),
|
||||
DA9062AA_GPIO0_TYPE_MASK << DA9062_TYPE(offset),
|
||||
gpi_type << DA9062_TYPE(offset));
|
||||
}
|
||||
|
||||
static int da9062_gpio_direction_output(struct gpio_chip *gc,
|
||||
unsigned int offset, int value)
|
||||
{
|
||||
struct da9062_pctl *pctl = gpiochip_get_data(gc);
|
||||
unsigned int pin_config = pctl->pin_config[offset];
|
||||
int ret;
|
||||
|
||||
ret = da9062_pctl_set_pin_mode(pctl, offset, pin_config);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
da9062_gpio_set(gc, offset, value);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int da9062_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
|
||||
unsigned long config)
|
||||
{
|
||||
struct da9062_pctl *pctl = gpiochip_get_data(gc);
|
||||
struct regmap *regmap = pctl->da9062->regmap;
|
||||
int gpio_mode;
|
||||
|
||||
/*
|
||||
* We need to meet the following restrictions [1, Figure 18]:
|
||||
* - PIN_CONFIG_BIAS_PULL_DOWN -> only allowed if the pin is used as
|
||||
* gpio input
|
||||
* - PIN_CONFIG_BIAS_PULL_UP -> only allowed if the pin is used as
|
||||
* gpio output open-drain.
|
||||
*/
|
||||
|
||||
switch (pinconf_to_config_param(config)) {
|
||||
case PIN_CONFIG_BIAS_DISABLE:
|
||||
return regmap_update_bits(regmap, DA9062AA_CONFIG_K,
|
||||
BIT(offset), 0);
|
||||
case PIN_CONFIG_BIAS_PULL_DOWN:
|
||||
gpio_mode = da9062_pctl_get_pin_mode(pctl, offset);
|
||||
if (gpio_mode < 0)
|
||||
return -EINVAL;
|
||||
else if (gpio_mode != DA9062_PIN_GPI)
|
||||
return -ENOTSUPP;
|
||||
return regmap_update_bits(regmap, DA9062AA_CONFIG_K,
|
||||
BIT(offset), BIT(offset));
|
||||
case PIN_CONFIG_BIAS_PULL_UP:
|
||||
gpio_mode = da9062_pctl_get_pin_mode(pctl, offset);
|
||||
if (gpio_mode < 0)
|
||||
return -EINVAL;
|
||||
else if (gpio_mode != DA9062_PIN_GPO_OD)
|
||||
return -ENOTSUPP;
|
||||
return regmap_update_bits(regmap, DA9062AA_CONFIG_K,
|
||||
BIT(offset), BIT(offset));
|
||||
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
|
||||
return da9062_pctl_set_pin_mode(pctl, offset,
|
||||
DA9062_PIN_GPO_OD);
|
||||
case PIN_CONFIG_DRIVE_PUSH_PULL:
|
||||
return da9062_pctl_set_pin_mode(pctl, offset,
|
||||
DA9062_PIN_GPO_PP);
|
||||
default:
|
||||
return -ENOTSUPP;
|
||||
}
|
||||
}
|
||||
|
||||
static int da9062_gpio_to_irq(struct gpio_chip *gc, unsigned int offset)
|
||||
{
|
||||
struct da9062_pctl *pctl = gpiochip_get_data(gc);
|
||||
struct da9062 *da9062 = pctl->da9062;
|
||||
|
||||
return regmap_irq_get_virq(da9062->regmap_irq,
|
||||
DA9062_IRQ_GPI0 + offset);
|
||||
}
|
||||
|
||||
static const struct gpio_chip reference_gc = {
|
||||
.owner = THIS_MODULE,
|
||||
.get = da9062_gpio_get,
|
||||
.set = da9062_gpio_set,
|
||||
.get_direction = da9062_gpio_get_direction,
|
||||
.direction_input = da9062_gpio_direction_input,
|
||||
.direction_output = da9062_gpio_direction_output,
|
||||
.set_config = da9062_gpio_set_config,
|
||||
.to_irq = da9062_gpio_to_irq,
|
||||
.can_sleep = true,
|
||||
.ngpio = DA9062_GPIO_NUM,
|
||||
.base = -1,
|
||||
};
|
||||
|
||||
static int da9062_pctl_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *parent = pdev->dev.parent;
|
||||
struct da9062_pctl *pctl;
|
||||
int i;
|
||||
|
||||
pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
|
||||
if (!pctl)
|
||||
return -ENOMEM;
|
||||
|
||||
pctl->da9062 = dev_get_drvdata(parent);
|
||||
if (!pctl->da9062)
|
||||
return -EINVAL;
|
||||
|
||||
if (!device_property_present(parent, "gpio-controller"))
|
||||
return 0;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(pctl->pin_config); i++)
|
||||
pctl->pin_config[i] = DA9062_PIN_GPO_PP;
|
||||
|
||||
/*
|
||||
* Currently the driver handles only the GPIO support. The
|
||||
* pinctrl/pinmux support can be added later if needed.
|
||||
*/
|
||||
pctl->gc = reference_gc;
|
||||
pctl->gc.label = dev_name(&pdev->dev);
|
||||
pctl->gc.parent = &pdev->dev;
|
||||
#ifdef CONFIG_OF_GPIO
|
||||
pctl->gc.of_node = parent->of_node;
|
||||
#endif
|
||||
|
||||
platform_set_drvdata(pdev, pctl);
|
||||
|
||||
return devm_gpiochip_add_data(&pdev->dev, &pctl->gc, pctl);
|
||||
}
|
||||
|
||||
static struct platform_driver da9062_pctl_driver = {
|
||||
.probe = da9062_pctl_probe,
|
||||
.driver = {
|
||||
.name = "da9062-gpio",
|
||||
},
|
||||
};
|
||||
module_platform_driver(da9062_pctl_driver);
|
||||
|
||||
MODULE_AUTHOR("Marco Felsch <kernel@pengutronix.de>");
|
||||
MODULE_DESCRIPTION("DA9062 PMIC pinctrl and GPIO Driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_ALIAS("platform:da9062-gpio");
|
Loading…
Reference in New Issue
Block a user