forked from luck/tmp_suning_uos_patched
leds: lm3697: Introduce the lm3697 driver
Introduce the lm3697 LED driver for backlighting and display. Datasheet location: http://www.ti.com/lit/ds/symlink/lm3697.pdf Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
This commit is contained in:
Dan Murphy
Jacek Anaszewski
parent
b86b9ba55a
commit
5c1d824cda
|
|
@ -792,6 +792,14 @@ config LEDS_TI_LMU_COMMON
|
|||
This supports common features between the TI LM3532, LM3631, LM3632,
|
||||
LM3633, LM3695 and LM3697.
|
||||
|
||||
config LEDS_LM3697
|
||||
tristate "LED driver for LM3697"
|
||||
depends on LEDS_TI_LMU_COMMON
|
||||
depends on I2C && OF
|
||||
help
|
||||
Say Y to enable the LM3697 LED driver for TI LMU devices.
|
||||
This supports the LED device LM3697.
|
||||
|
||||
comment "LED Triggers"
|
||||
source "drivers/leds/trigger/Kconfig"
|
||||
|
||||
|
|
|
|||
|
|
@ -82,6 +82,7 @@ obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o
|
|||
obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o
|
||||
obj-$(CONFIG_LEDS_LM3601X) += leds-lm3601x.o
|
||||
obj-$(CONFIG_LEDS_TI_LMU_COMMON) += leds-ti-lmu-common.o
|
||||
obj-$(CONFIG_LEDS_LM3697) += leds-lm3697.o
|
||||
|
||||
# LED SPI Drivers
|
||||
obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o
|
||||
|
|
|
|||
395
drivers/leds/leds-lm3697.c
Normal file
395
drivers/leds/leds-lm3697.c
Normal file
|
|
@ -0,0 +1,395 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
// TI LM3697 LED chip family driver
|
||||
// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
|
||||
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/regulator/consumer.h>
|
||||
#include <linux/leds-ti-lmu-common.h>
|
||||
|
||||
#define LM3697_REV 0x0
|
||||
#define LM3697_RESET 0x1
|
||||
#define LM3697_OUTPUT_CONFIG 0x10
|
||||
#define LM3697_CTRL_A_RAMP 0x11
|
||||
#define LM3697_CTRL_B_RAMP 0x12
|
||||
#define LM3697_CTRL_A_B_RT_RAMP 0x13
|
||||
#define LM3697_CTRL_A_B_RAMP_CFG 0x14
|
||||
#define LM3697_CTRL_A_B_BRT_CFG 0x16
|
||||
#define LM3697_CTRL_A_FS_CURR_CFG 0x17
|
||||
#define LM3697_CTRL_B_FS_CURR_CFG 0x18
|
||||
#define LM3697_PWM_CFG 0x1c
|
||||
#define LM3697_CTRL_A_BRT_LSB 0x20
|
||||
#define LM3697_CTRL_A_BRT_MSB 0x21
|
||||
#define LM3697_CTRL_B_BRT_LSB 0x22
|
||||
#define LM3697_CTRL_B_BRT_MSB 0x23
|
||||
#define LM3697_CTRL_ENABLE 0x24
|
||||
|
||||
#define LM3697_SW_RESET BIT(0)
|
||||
|
||||
#define LM3697_CTRL_A_EN BIT(0)
|
||||
#define LM3697_CTRL_B_EN BIT(1)
|
||||
#define LM3697_CTRL_A_B_EN (LM3697_CTRL_A_EN | LM3697_CTRL_B_EN)
|
||||
|
||||
#define LM3697_MAX_LED_STRINGS 3
|
||||
|
||||
#define LM3697_CONTROL_A 0
|
||||
#define LM3697_CONTROL_B 1
|
||||
#define LM3697_MAX_CONTROL_BANKS 2
|
||||
|
||||
/**
|
||||
* struct lm3697_led -
|
||||
* @hvled_strings: Array of LED strings associated with a control bank
|
||||
* @label: LED label
|
||||
* @led_dev: LED class device
|
||||
* @priv: Pointer to the device struct
|
||||
* @lmu_data: Register and setting values for common code
|
||||
* @control_bank: Control bank the LED is associated to. 0 is control bank A
|
||||
* 1 is control bank B
|
||||
*/
|
||||
struct lm3697_led {
|
||||
u32 hvled_strings[LM3697_MAX_LED_STRINGS];
|
||||
char label[LED_MAX_NAME_SIZE];
|
||||
struct led_classdev led_dev;
|
||||
struct lm3697 *priv;
|
||||
struct ti_lmu_bank lmu_data;
|
||||
int control_bank;
|
||||
int enabled;
|
||||
int num_leds;
|
||||
};
|
||||
|
||||
/**
|
||||
* struct lm3697 -
|
||||
* @enable_gpio: Hardware enable gpio
|
||||
* @regulator: LED supply regulator pointer
|
||||
* @client: Pointer to the I2C client
|
||||
* @regmap: Devices register map
|
||||
* @dev: Pointer to the devices device struct
|
||||
* @lock: Lock for reading/writing the device
|
||||
* @leds: Array of LED strings
|
||||
*/
|
||||
struct lm3697 {
|
||||
struct gpio_desc *enable_gpio;
|
||||
struct regulator *regulator;
|
||||
struct i2c_client *client;
|
||||
struct regmap *regmap;
|
||||
struct device *dev;
|
||||
struct mutex lock;
|
||||
|
||||
int bank_cfg;
|
||||
|
||||
struct lm3697_led leds[];
|
||||
};
|
||||
|
||||
static const struct reg_default lm3697_reg_defs[] = {
|
||||
{LM3697_OUTPUT_CONFIG, 0x6},
|
||||
{LM3697_CTRL_A_RAMP, 0x0},
|
||||
{LM3697_CTRL_B_RAMP, 0x0},
|
||||
{LM3697_CTRL_A_B_RT_RAMP, 0x0},
|
||||
{LM3697_CTRL_A_B_RAMP_CFG, 0x0},
|
||||
{LM3697_CTRL_A_B_BRT_CFG, 0x0},
|
||||
{LM3697_CTRL_A_FS_CURR_CFG, 0x13},
|
||||
{LM3697_CTRL_B_FS_CURR_CFG, 0x13},
|
||||
{LM3697_PWM_CFG, 0xc},
|
||||
{LM3697_CTRL_A_BRT_LSB, 0x0},
|
||||
{LM3697_CTRL_A_BRT_MSB, 0x0},
|
||||
{LM3697_CTRL_B_BRT_LSB, 0x0},
|
||||
{LM3697_CTRL_B_BRT_MSB, 0x0},
|
||||
{LM3697_CTRL_ENABLE, 0x0},
|
||||
};
|
||||
|
||||
static const struct regmap_config lm3697_regmap_config = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
|
||||
.max_register = LM3697_CTRL_ENABLE,
|
||||
.reg_defaults = lm3697_reg_defs,
|
||||
.num_reg_defaults = ARRAY_SIZE(lm3697_reg_defs),
|
||||
.cache_type = REGCACHE_FLAT,
|
||||
};
|
||||
|
||||
static int lm3697_brightness_set(struct led_classdev *led_cdev,
|
||||
enum led_brightness brt_val)
|
||||
{
|
||||
struct lm3697_led *led = container_of(led_cdev, struct lm3697_led,
|
||||
led_dev);
|
||||
int ctrl_en_val = (1 << led->control_bank);
|
||||
int ret;
|
||||
|
||||
mutex_lock(&led->priv->lock);
|
||||
|
||||
if (brt_val == LED_OFF) {
|
||||
ret = regmap_update_bits(led->priv->regmap, LM3697_CTRL_ENABLE,
|
||||
ctrl_en_val, ~ctrl_en_val);
|
||||
if (ret) {
|
||||
dev_err(&led->priv->client->dev, "Cannot write ctrl register\n");
|
||||
goto brightness_out;
|
||||
}
|
||||
|
||||
led->enabled = LED_OFF;
|
||||
} else {
|
||||
ret = ti_lmu_common_set_brightness(&led->lmu_data, brt_val);
|
||||
if (ret) {
|
||||
dev_err(&led->priv->client->dev,
|
||||
"Cannot write brightness\n");
|
||||
goto brightness_out;
|
||||
}
|
||||
|
||||
if (!led->enabled) {
|
||||
ret = regmap_update_bits(led->priv->regmap,
|
||||
LM3697_CTRL_ENABLE,
|
||||
ctrl_en_val, ctrl_en_val);
|
||||
if (ret) {
|
||||
dev_err(&led->priv->client->dev,
|
||||
"Cannot enable the device\n");
|
||||
goto brightness_out;
|
||||
}
|
||||
|
||||
led->enabled = brt_val;
|
||||
}
|
||||
}
|
||||
|
||||
brightness_out:
|
||||
mutex_unlock(&led->priv->lock);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int lm3697_init(struct lm3697 *priv)
|
||||
{
|
||||
struct lm3697_led *led;
|
||||
int i, ret;
|
||||
|
||||
if (priv->enable_gpio) {
|
||||
gpiod_direction_output(priv->enable_gpio, 1);
|
||||
} else {
|
||||
ret = regmap_write(priv->regmap, LM3697_RESET, LM3697_SW_RESET);
|
||||
if (ret) {
|
||||
dev_err(&priv->client->dev, "Cannot reset the device\n");
|
||||
goto out;
|
||||
}
|
||||
}
|
||||
|
||||
ret = regmap_write(priv->regmap, LM3697_CTRL_ENABLE, 0x0);
|
||||
if (ret) {
|
||||
dev_err(&priv->client->dev, "Cannot write ctrl enable\n");
|
||||
goto out;
|
||||
}
|
||||
|
||||
ret = regmap_write(priv->regmap, LM3697_OUTPUT_CONFIG, priv->bank_cfg);
|
||||
if (ret)
|
||||
dev_err(&priv->client->dev, "Cannot write OUTPUT config\n");
|
||||
|
||||
for (i = 0; i < LM3697_MAX_CONTROL_BANKS; i++) {
|
||||
led = &priv->leds[i];
|
||||
ret = ti_lmu_common_set_ramp(&led->lmu_data);
|
||||
if (ret)
|
||||
dev_err(&priv->client->dev, "Setting the ramp rate failed\n");
|
||||
}
|
||||
out:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int lm3697_probe_dt(struct lm3697 *priv)
|
||||
{
|
||||
struct fwnode_handle *child = NULL;
|
||||
struct lm3697_led *led;
|
||||
const char *name;
|
||||
int control_bank;
|
||||
size_t i = 0;
|
||||
int ret = -EINVAL;
|
||||
int j;
|
||||
|
||||
priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev,
|
||||
"enable", GPIOD_OUT_LOW);
|
||||
if (IS_ERR(priv->enable_gpio)) {
|
||||
ret = PTR_ERR(priv->enable_gpio);
|
||||
dev_err(&priv->client->dev, "Failed to get enable gpio: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
priv->regulator = devm_regulator_get(&priv->client->dev, "vled");
|
||||
if (IS_ERR(priv->regulator))
|
||||
priv->regulator = NULL;
|
||||
|
||||
device_for_each_child_node(priv->dev, child) {
|
||||
ret = fwnode_property_read_u32(child, "reg", &control_bank);
|
||||
if (ret) {
|
||||
dev_err(&priv->client->dev, "reg property missing\n");
|
||||
fwnode_handle_put(child);
|
||||
goto child_out;
|
||||
}
|
||||
|
||||
if (control_bank > LM3697_CONTROL_B) {
|
||||
dev_err(&priv->client->dev, "reg property is invalid\n");
|
||||
ret = -EINVAL;
|
||||
fwnode_handle_put(child);
|
||||
goto child_out;
|
||||
}
|
||||
|
||||
led = &priv->leds[i];
|
||||
|
||||
ret = ti_lmu_common_get_brt_res(&priv->client->dev,
|
||||
child, &led->lmu_data);
|
||||
if (ret)
|
||||
dev_warn(&priv->client->dev, "brightness resolution property missing\n");
|
||||
|
||||
led->control_bank = control_bank;
|
||||
led->lmu_data.regmap = priv->regmap;
|
||||
led->lmu_data.runtime_ramp_reg = LM3697_CTRL_A_RAMP +
|
||||
control_bank;
|
||||
led->lmu_data.msb_brightness_reg = LM3697_CTRL_A_BRT_MSB +
|
||||
led->control_bank * 2;
|
||||
led->lmu_data.lsb_brightness_reg = LM3697_CTRL_A_BRT_LSB +
|
||||
led->control_bank * 2;
|
||||
|
||||
led->num_leds = fwnode_property_read_u32_array(child,
|
||||
"led-sources",
|
||||
NULL, 0);
|
||||
|
||||
if (led->num_leds > LM3697_MAX_LED_STRINGS) {
|
||||
dev_err(&priv->client->dev, "To many LED strings defined\n");
|
||||
continue;
|
||||
}
|
||||
|
||||
ret = fwnode_property_read_u32_array(child, "led-sources",
|
||||
led->hvled_strings,
|
||||
led->num_leds);
|
||||
if (ret) {
|
||||
dev_err(&priv->client->dev, "led-sources property missing\n");
|
||||
fwnode_handle_put(child);
|
||||
goto child_out;
|
||||
}
|
||||
|
||||
for (j = 0; j < led->num_leds; j++)
|
||||
priv->bank_cfg |=
|
||||
(led->control_bank << led->hvled_strings[j]);
|
||||
|
||||
ret = ti_lmu_common_get_ramp_params(&priv->client->dev,
|
||||
child, &led->lmu_data);
|
||||
if (ret)
|
||||
dev_warn(&priv->client->dev, "runtime-ramp properties missing\n");
|
||||
|
||||
fwnode_property_read_string(child, "linux,default-trigger",
|
||||
&led->led_dev.default_trigger);
|
||||
|
||||
ret = fwnode_property_read_string(child, "label", &name);
|
||||
if (ret)
|
||||
snprintf(led->label, sizeof(led->label),
|
||||
"%s::", priv->client->name);
|
||||
else
|
||||
snprintf(led->label, sizeof(led->label),
|
||||
"%s:%s", priv->client->name, name);
|
||||
|
||||
led->priv = priv;
|
||||
led->led_dev.name = led->label;
|
||||
led->led_dev.max_brightness = led->lmu_data.max_brightness;
|
||||
led->led_dev.brightness_set_blocking = lm3697_brightness_set;
|
||||
|
||||
ret = devm_led_classdev_register(priv->dev, &led->led_dev);
|
||||
if (ret) {
|
||||
dev_err(&priv->client->dev, "led register err: %d\n",
|
||||
ret);
|
||||
fwnode_handle_put(child);
|
||||
goto child_out;
|
||||
}
|
||||
|
||||
i++;
|
||||
}
|
||||
|
||||
child_out:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int lm3697_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct lm3697 *led;
|
||||
int count;
|
||||
int ret;
|
||||
|
||||
count = device_get_child_node_count(&client->dev);
|
||||
if (!count) {
|
||||
dev_err(&client->dev, "LEDs are not defined in device tree!");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
led = devm_kzalloc(&client->dev, struct_size(led, leds, count),
|
||||
GFP_KERNEL);
|
||||
if (!led)
|
||||
return -ENOMEM;
|
||||
|
||||
mutex_init(&led->lock);
|
||||
i2c_set_clientdata(client, led);
|
||||
|
||||
led->client = client;
|
||||
led->dev = &client->dev;
|
||||
led->regmap = devm_regmap_init_i2c(client, &lm3697_regmap_config);
|
||||
if (IS_ERR(led->regmap)) {
|
||||
ret = PTR_ERR(led->regmap);
|
||||
dev_err(&client->dev, "Failed to allocate register map: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = lm3697_probe_dt(led);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
return lm3697_init(led);
|
||||
}
|
||||
|
||||
static int lm3697_remove(struct i2c_client *client)
|
||||
{
|
||||
struct lm3697 *led = i2c_get_clientdata(client);
|
||||
int ret;
|
||||
|
||||
ret = regmap_update_bits(led->regmap, LM3697_CTRL_ENABLE,
|
||||
LM3697_CTRL_A_B_EN, 0);
|
||||
if (ret) {
|
||||
dev_err(&led->client->dev, "Failed to disable the device\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (led->enable_gpio)
|
||||
gpiod_direction_output(led->enable_gpio, 0);
|
||||
|
||||
if (led->regulator) {
|
||||
ret = regulator_disable(led->regulator);
|
||||
if (ret)
|
||||
dev_err(&led->client->dev,
|
||||
"Failed to disable regulator\n");
|
||||
}
|
||||
|
||||
mutex_destroy(&led->lock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id lm3697_id[] = {
|
||||
{ "lm3697", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, lm3697_id);
|
||||
|
||||
static const struct of_device_id of_lm3697_leds_match[] = {
|
||||
{ .compatible = "ti,lm3697", },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, of_lm3697_leds_match);
|
||||
|
||||
static struct i2c_driver lm3697_driver = {
|
||||
.driver = {
|
||||
.name = "lm3697",
|
||||
.of_match_table = of_lm3697_leds_match,
|
||||
},
|
||||
.probe = lm3697_probe,
|
||||
.remove = lm3697_remove,
|
||||
.id_table = lm3697_id,
|
||||
};
|
||||
module_i2c_driver(lm3697_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Texas Instruments LM3697 LED driver");
|
||||
MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in New Issue
Block a user