forked from luck/tmp_suning_uos_patched
ide: it8213 IDE driver update (version 2)
* set ATAPI/IORDY/TIME bits correctly in it8213_tuneproc() * fix UDMA/MWDMA/SWDMA masks in it8213_init_hwif() * in it8213_tune_chipset() SWDMA2 mode should be used instead of MWDMA0 * backport various fixes from piix/slc90e66 drivers: - in it8213_tuneproc() the highest possible PIO mode is PIO4 (not PIO5) - clear ATAPI/IORDY/TIME bits before setting them also for slave device - use ->speedproc in it8213_config_drive_for_dma() - don't try to tune PIO in config_chipset_for_pio() - simplify is_slave calculation in it8213_tuneproc() - misc cleanups * fix it8213_ratemask() and it8213_tuneproc() comments * simplify it8213_init_hwif() * remove init_chipset_it8213() * add missing Copyrights and update MODULE_AUTHOR() * CodingStyle cleanups * remove dead code v2: * PCI_DEVICE_ID_ITE_8213 is only defined in -mm kernels, so just use PCI Device ID (0x8213) directly * fix ->ultra_mask incorrectly changed to 0x3f in v1 version of the patch Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
Bartlomiej Zolnierkiewicz
parent
9c6712c0bc
commit
6788182602
@ -1,3 +1,11 @@
|
||||
/*
|
||||
* ITE 8213 IDE driver
|
||||
*
|
||||
* Copyright (C) 2006 Jack Lee
|
||||
* Copyright (C) 2006 Alan Cox
|
||||
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/module.h>
|
||||
@ -14,14 +22,14 @@
|
||||
* @drive: IDE drive
|
||||
*
|
||||
* Compute the available speeds for the devices on the interface. This
|
||||
* is all modes to ATA100 clipped by drive cable setup.
|
||||
* is all modes to ATA133 clipped by drive cable setup.
|
||||
*/
|
||||
|
||||
static u8 it8213_ratemask (ide_drive_t *drive)
|
||||
{
|
||||
u8 mode = 4;
|
||||
if (!eighty_ninty_three(drive))
|
||||
mode = min(mode, (u8)1);
|
||||
mode = min_t(u8, mode, 1);
|
||||
return mode;
|
||||
}
|
||||
|
||||
@ -62,55 +70,57 @@ static u8 it8213_dma_2_pio (u8 xfer_rate) {
|
||||
}
|
||||
}
|
||||
|
||||
static spinlock_t tune_lock = SPIN_LOCK_UNLOCKED;
|
||||
|
||||
/*
|
||||
* it8213_tuneproc - tune a drive
|
||||
* @drive: drive to tune
|
||||
* @mode_wanted: the target operating mode
|
||||
* @pio: desired PIO mode
|
||||
*
|
||||
* Load the timing settings for this device mode into the
|
||||
* controller. By the time we are called the mode has been
|
||||
* modified as neccessary to handle the absence of seperate
|
||||
* master/slave timers for MWDMA/PIO.
|
||||
*
|
||||
* This code is only used in pass through mode.
|
||||
* Set the interface PIO mode.
|
||||
*/
|
||||
|
||||
static void it8213_tuneproc (ide_drive_t *drive, u8 pio)
|
||||
static void it8213_tuneproc (ide_drive_t *drive, u8 pio)
|
||||
{
|
||||
ide_hwif_t *hwif = HWIF(drive);
|
||||
struct pci_dev *dev = hwif->pci_dev;
|
||||
int is_slave = (&hwif->drives[1] == drive);
|
||||
int is_slave = drive->dn & 1;
|
||||
int master_port = 0x40;
|
||||
int slave_port = 0x44;
|
||||
unsigned long flags;
|
||||
u16 master_data;
|
||||
u8 slave_data;
|
||||
static DEFINE_SPINLOCK(tune_lock);
|
||||
int control = 0;
|
||||
|
||||
u8 timings[][2] = { { 0, 0 },
|
||||
{ 0, 0 },
|
||||
{ 1, 0 },
|
||||
{ 2, 1 },
|
||||
{ 2, 3 }, };
|
||||
static const u8 timings[][2]= {
|
||||
{ 0, 0 },
|
||||
{ 0, 0 },
|
||||
{ 1, 0 },
|
||||
{ 2, 1 },
|
||||
{ 2, 3 }, };
|
||||
|
||||
pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
|
||||
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
|
||||
|
||||
spin_lock_irqsave(&tune_lock, flags);
|
||||
pci_read_config_word(dev, master_port, &master_data);
|
||||
if (is_slave) {
|
||||
master_data = master_data | 0x4000;
|
||||
if (pio > 1)
|
||||
|
||||
master_data = master_data | 0x0070;
|
||||
if (pio > 1)
|
||||
control |= 1; /* Programmable timing on */
|
||||
if (drive->media != ide_disk)
|
||||
control |= 4; /* ATAPI */
|
||||
if (pio > 2)
|
||||
control |= 2; /* IORDY */
|
||||
if (is_slave) {
|
||||
master_data |= 0x4000;
|
||||
master_data &= ~0x0070;
|
||||
if (pio > 1)
|
||||
master_data = master_data | (control << 4);
|
||||
pci_read_config_byte(dev, slave_port, &slave_data);
|
||||
slave_data = slave_data & 0xf0;
|
||||
slave_data = slave_data | (((timings[pio][0] << 2) | (timings[pio][1]) << 0));
|
||||
slave_data = slave_data | (timings[pio][0] << 2) | timings[pio][1];
|
||||
} else {
|
||||
master_data = master_data & 0xccf8;
|
||||
master_data &= ~0x3307;
|
||||
if (pio > 1)
|
||||
|
||||
master_data = master_data | 0x0007;
|
||||
master_data = master_data | control;
|
||||
master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8);
|
||||
}
|
||||
pci_write_config_word(dev, master_port, master_data);
|
||||
@ -119,7 +129,6 @@ static void it8213_tuneproc (ide_drive_t *drive, u8 pio)
|
||||
spin_unlock_irqrestore(&tune_lock, flags);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* it8213_tune_chipset - set controller timings
|
||||
* @drive: Drive to set up
|
||||
@ -130,7 +139,7 @@ static void it8213_tuneproc (ide_drive_t *drive, u8 pio)
|
||||
* make the thing work.
|
||||
*/
|
||||
|
||||
static int it8213_tune_chipset (ide_drive_t *drive, byte xferspeed)
|
||||
static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed)
|
||||
{
|
||||
|
||||
ide_hwif_t *hwif = HWIF(drive);
|
||||
@ -154,15 +163,15 @@ static int it8213_tune_chipset (ide_drive_t *drive, byte xferspeed)
|
||||
switch(speed) {
|
||||
case XFER_UDMA_6:
|
||||
case XFER_UDMA_4:
|
||||
case XFER_UDMA_2:u_speed = 2 << (drive->dn * 4); break;
|
||||
case XFER_UDMA_2: u_speed = 2 << (drive->dn * 4); break;
|
||||
case XFER_UDMA_5:
|
||||
case XFER_UDMA_3:
|
||||
case XFER_UDMA_1:u_speed = 1 << (drive->dn * 4); break;
|
||||
case XFER_UDMA_0:u_speed = 0 << (drive->dn * 4); break;
|
||||
case XFER_UDMA_1: u_speed = 1 << (drive->dn * 4); break;
|
||||
case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break;
|
||||
break;
|
||||
case XFER_MW_DMA_2:
|
||||
case XFER_MW_DMA_1:
|
||||
case XFER_MW_DMA_0:
|
||||
case XFER_SW_DMA_2:
|
||||
break;
|
||||
case XFER_PIO_4:
|
||||
case XFER_PIO_3:
|
||||
@ -174,8 +183,7 @@ static int it8213_tune_chipset (ide_drive_t *drive, byte xferspeed)
|
||||
return -1;
|
||||
}
|
||||
|
||||
if (speed >= XFER_UDMA_0)
|
||||
{
|
||||
if (speed >= XFER_UDMA_0) {
|
||||
if (!(reg48 & u_flag))
|
||||
pci_write_config_byte(dev, 0x48, reg48 | u_flag);
|
||||
if (speed >= XFER_UDMA_5) {
|
||||
@ -186,14 +194,12 @@ static int it8213_tune_chipset (ide_drive_t *drive, byte xferspeed)
|
||||
|
||||
if ((reg4a & a_speed) != u_speed)
|
||||
pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed);
|
||||
if (speed > XFER_UDMA_2)
|
||||
{
|
||||
if (speed > XFER_UDMA_2) {
|
||||
if (!(reg54 & v_flag))
|
||||
pci_write_config_byte(dev, 0x54, reg54 | v_flag);
|
||||
} else
|
||||
pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
|
||||
} else /*if(speed >= XFER_UDMA_0)*/
|
||||
{
|
||||
} else {
|
||||
if (reg48 & u_flag)
|
||||
pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
|
||||
if (reg4a & a_speed)
|
||||
@ -202,11 +208,10 @@ static int it8213_tune_chipset (ide_drive_t *drive, byte xferspeed)
|
||||
pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
|
||||
if (reg55 & w_flag)
|
||||
pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
|
||||
}
|
||||
}
|
||||
it8213_tuneproc(drive, it8213_dma_2_pio(speed));
|
||||
return ide_config_drive_speed(drive, speed);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/*
|
||||
* config_chipset_for_dma - configure for DMA
|
||||
@ -217,47 +222,16 @@ static int it8213_tune_chipset (ide_drive_t *drive, byte xferspeed)
|
||||
|
||||
static int config_chipset_for_dma (ide_drive_t *drive)
|
||||
{
|
||||
u8 speed = ide_dma_speed(drive, it8213_ratemask(drive));
|
||||
u8 speed = ide_dma_speed(drive, it8213_ratemask(drive));
|
||||
|
||||
if (!speed)
|
||||
{
|
||||
u8 tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL);
|
||||
speed = it8213_dma_2_pio(XFER_PIO_0 + tspeed);
|
||||
}
|
||||
// config_it8213_chipset_for_pio(drive, !speed);
|
||||
return 0;
|
||||
|
||||
it8213_tune_chipset(drive, speed);
|
||||
|
||||
return ide_dma_enable(drive);
|
||||
}
|
||||
|
||||
/**
|
||||
* config_it8213_chipset_for_pio - set drive timings
|
||||
* @drive: drive to tune
|
||||
* @speed we want
|
||||
*
|
||||
* Compute the best pio mode we can for a given device. We must
|
||||
* pick a speed that does not cause problems with the other device
|
||||
* on the cable.
|
||||
*/
|
||||
/*
|
||||
static void config_it8213_chipset_for_pio (ide_drive_t *drive, byte set_speed)
|
||||
{
|
||||
ide_hwif_t *hwif = HWIF(drive);
|
||||
// u8 unit = drive->select.b.unit;
|
||||
ide_hwif_t *hwif = drive->hwif;
|
||||
ide_drive_t *pair = &hwif->drives[1-unit];
|
||||
u8 speed = 0, set_pio = ide_get_best_pio_mode(drive, 255, 5, NULL);
|
||||
u8 pair_pio;
|
||||
|
||||
if(pair != NULL) {
|
||||
pair_pio = ide_get_best_pio_mode(pair, 255, 5, NULL);
|
||||
if(pair_pio < set_pio)
|
||||
set_pio = pair_pio;
|
||||
}
|
||||
it8213_tuneproc(drive, set_pio);
|
||||
speed = XFER_PIO_0 + set_pio;
|
||||
if (set_speed)
|
||||
(void) ide_config_drive_speed(drive, speed);
|
||||
}
|
||||
*/
|
||||
/**
|
||||
* it8213_configure_drive_for_dma - set up for DMA transfers
|
||||
* @drive: drive we are going to set up
|
||||
@ -270,26 +244,19 @@ static void config_it8213_chipset_for_pio (ide_drive_t *drive, byte set_speed)
|
||||
|
||||
static int it8213_config_drive_for_dma (ide_drive_t *drive)
|
||||
{
|
||||
// ide_hwif_t *hwif = drive->hwif;
|
||||
// struct hd_driveid *id = drive->id;
|
||||
ide_hwif_t *hwif = HWIF(drive);
|
||||
ide_hwif_t *hwif = drive->hwif;
|
||||
|
||||
if (ide_use_dma(drive)) {
|
||||
if (config_chipset_for_dma(drive))
|
||||
return hwif->ide_dma_on(drive);
|
||||
}
|
||||
// config_it8213_chipset_for_pio(drive, 1);
|
||||
hwif->tuneproc(drive, 255);
|
||||
|
||||
hwif->speedproc(drive, XFER_PIO_0
|
||||
+ ide_get_best_pio_mode(drive, 255, 4, NULL));
|
||||
|
||||
return hwif->ide_dma_off_quietly(drive);
|
||||
}
|
||||
|
||||
|
||||
static unsigned int __devinit init_chipset_it8213(struct pci_dev *dev, const char *name)
|
||||
{
|
||||
printk(KERN_INFO "it8213: controller in IDE mode.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* init_hwif_it8213 - set up hwif structs
|
||||
* @hwif: interface to set up
|
||||
@ -302,9 +269,6 @@ static unsigned int __devinit init_chipset_it8213(struct pci_dev *dev, const cha
|
||||
static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
|
||||
{
|
||||
u8 reg42h = 0, ata66 = 0;
|
||||
u8 mask = 0x02;
|
||||
|
||||
hwif->atapi_dma = 1;
|
||||
|
||||
hwif->speedproc = &it8213_tune_chipset;
|
||||
hwif->tuneproc = &it8213_tuneproc;
|
||||
@ -315,19 +279,19 @@ static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
|
||||
hwif->drives[1].autotune = 1;
|
||||
|
||||
if (!hwif->dma_base)
|
||||
goto fallback;
|
||||
return;
|
||||
|
||||
hwif->atapi_dma = 1;
|
||||
hwif->ultra_mask = 0x7f;
|
||||
hwif->mwdma_mask = 0x07;
|
||||
hwif->swdma_mask = 0x07;
|
||||
hwif->mwdma_mask = 0x06;
|
||||
hwif->swdma_mask = 0x04;
|
||||
|
||||
pci_read_config_byte(hwif->pci_dev, 0x42, ®42h);
|
||||
ata66 = (reg42h & mask) ? 0 : 1;
|
||||
ata66 = (reg42h & 0x02) ? 0 : 1;
|
||||
|
||||
hwif->ide_dma_check = &it8213_config_drive_for_dma;
|
||||
if (!(hwif->udma_four))
|
||||
hwif->udma_four = ata66;
|
||||
// hwif->udma_four = 0;
|
||||
|
||||
/*
|
||||
* The BIOS often doesn't set up DMA on this controller
|
||||
@ -338,20 +302,15 @@ static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
|
||||
|
||||
hwif->drives[0].autodma = hwif->autodma;
|
||||
hwif->drives[1].autodma = hwif->autodma;
|
||||
return;
|
||||
fallback:
|
||||
hwif->autodma = 0;
|
||||
return;
|
||||
}
|
||||
|
||||
|
||||
#define DECLARE_ITE_DEV(name_str) \
|
||||
{ \
|
||||
.name = name_str, \
|
||||
.init_chipset = init_chipset_it8213, \
|
||||
.init_hwif = init_hwif_it8213, \
|
||||
.channels = 1, \
|
||||
.autodma = AUTODMA, \
|
||||
.autodma = AUTODMA, \
|
||||
.enablebits = {{0x41,0x80,0x80}}, \
|
||||
.bootable = ON_BOARD, \
|
||||
}
|
||||
@ -379,7 +338,7 @@ static int __devinit it8213_init_one(struct pci_dev *dev, const struct pci_devic
|
||||
|
||||
|
||||
static struct pci_device_id it8213_pci_tbl[] = {
|
||||
{ PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8213, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
||||
{ PCI_VENDOR_ID_ITE, 0x8213, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
|
||||
{ 0, },
|
||||
};
|
||||
|
||||
@ -393,10 +352,11 @@ static struct pci_driver driver = {
|
||||
|
||||
static int __init it8213_ide_init(void)
|
||||
{
|
||||
return ide_pci_register_driver(&driver); }
|
||||
return ide_pci_register_driver(&driver);
|
||||
}
|
||||
|
||||
module_init(it8213_ide_init);
|
||||
|
||||
MODULE_AUTHOR("Jack and Alan Cox"); /* Update this */
|
||||
MODULE_AUTHOR("Jack Lee, Alan Cox");
|
||||
MODULE_DESCRIPTION("PCI driver module for the ITE 8213");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
Loading…
Reference in New Issue
Block a user